DDWT 4 Pack Aluminum Alloy Bench Dogs Woodworking Clamp for 3/4 Inch (19mm) Dog Hole (Red)
Asin: B0BBP8RLFD | Model: DD0824A | PartNumber: DD0824A | Ean: 0610825041289 | UPC: 610825041289
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Fits 3/4 Inch (19Mm) Diameter Dog Holes, Tight Tolerance, It Can Be Fixed Directly By Placing It Into Mft Bench.
Bench Dogs Are An Essential Hold Down Device That Should Be A Part Of Any Workbench,Great For Planing, Routing, Cutting, And Sanding.
Square Contact Surface,Provide Non-Marring And Secure Hold On Your Wood Stock.
Low-Profile Design, So Will Not Interfere When Planing Or Sanding Thinner Material; No Need To Worry About Damaging Plane Blades Because It Is Always Lower Than What You Want To Plane.
Features
- Machined from aluminum alloy with anodized surface; compared to plastic or nylon bench dog, it can withstand higher-strength working conditions and is more durable
- Low-profile design, so will not interfere when planing or sanding thinner material; no need to worry about damaging plane blades because it is always lower than what you want to plane
- Fits 3/4 inch (19mm) diameter dog holes, tight tolerance, it can be fixed directly by placing it into MFT bench
- Square contact surface,provide non-marring and secure hold on your wood stock
- Bench dogs are an essential hold down device that should be a part of any workbench,great for planing, routing, cutting, and sanding
- See more on Amazon...
Brand: DDWT | Manufacturer: DDWT
See On Amazon Similar To DDWT 4 Pack Aluminum Alloy
#1
DDWT High Speed Carbide Inserts Dowel Maker Dowel Cutter Dowel Plate Wood Dowel Rod Sticks Maker 8 Holes,Black,(MG0-000-0068)
Asin: B0C5SJMKJ6 | Model: MG0-000-0068 | PartNumber: MG0-000-0068
Indexable Carbide Insert, Have 4 Edges Ready To Be Used For Cutting, No Need To Sharpen, All You Have To Do Is Rotate The Blade To Use A Fresh Edge; Replacement Is Readily Available.
The Dowel Maker Is Cnc-Machined From Aluminum Alloy And Anodized, Solid,Wear Resistance And No Rust.
About 1 Inch Thick Hole Can Effectively Maintain The Advance Direction Of The Workpiece And Make The Dowel Straighter, Which Is Conducive To Making Slightly Longer Dowels Or Sticks.
8 Size Metric Holes,Contains: 8Mm,9Mm,10Mm,12Mm,15Mm,16Mm,18Mm,20Mm.
Features
- Use carbide blade, smoother cutting, more efficiently than ordinary dowel plate
- 8 size metric holes,contains: 8mm,9mm,10mm,12mm,15mm,16mm,18mm,20mm
- Indexable carbide insert, have 4 edges ready to be used for cutting, no need to sharpen, all you have to do is rotate the blade to use a fresh edge; Replacement is readily available
- About 1 inch thick hole can effectively maintain the advance direction of the workpiece and make the dowel straighter, which is conducive to making slightly longer dowels or sticks
- The dowel maker is CNC-machined from aluminum alloy and anodized, solid,wear resistance and no rust
- See more on Amazon...
Brand: DDWT | Manufacturer: DDWT
Dimensions: 3.15 x 3.30 x 0.94 inches
See On Amazon #2
DDWT Updated Bearing Roller Featherboards Feather Boards for Table Saw Router Tables and Band Saws Table Saw Jig Guide
Asin: B0CCDFVVQR | Model: MG0-000-0111 | PartNumber: MG0-000-0111
The Pressing Force Of The Roller Can Be Adjusted As Required By Turning The Brass Knob;To A Certain Extent, It Can Be Used As A Table Saw Thin Rip Jig..
Smaller Size, Lower Profile, Support Horizontal And Vertical Installation..
Equipped With Sliders And T-Slot Bolts, Fit 3/4 X 3/8 Inch, 3/8 X 1/4 Inch, 30Mm And 45Mm T-Slot Track, Can Work With Most Standard Table Saw, Router Table And Band Saw..
This Table Saw Jig Is Machined From Aluminum Alloy,Anodized Surface,Flexible Polyurethane Wheels,Solidly Constructed,Has A Longer Service Life Than Plastic Feather Board..
Features
- The rollers are spring loaded to keep pressure on varying contours of the workpiece;use of bearing rollers instead of plastic feathers greatly reduces friction and makes feeding smoother.
- This table saw jig is machined from aluminum alloy,anodized surface,flexible polyurethane wheels,solidly constructed,has a longer service life than plastic feather board.
- The pressing force of the roller can be adjusted as required by turning the brass knob;To a certain extent, it can be used as a table saw thin rip jig.
- Equipped with sliders and T-slot bolts, fit 3/4 x 3/8 inch, 3/8 x 1/4 inch, 30mm and 45mm T-Slot Track, can work with most standard table saw, router table and band saw.
- Smaller size, lower profile, support horizontal and vertical installation.
- See more on Amazon...
Brand: DDWT | Manufacturer: DDWT
Dimensions: 4.88 x 0.59 x 3.94 inches
See On Amazon #3
DDWT 2 Pack MFT Style Hold Down Clamp Bench Dog Clamp 3/4 Inch Dog Hole Clamp Woodworking Benchtop Quick Clamps Aluminum Alloy (19mm)
Asin: B09WHQ1BZ6 | Model: DD1102 | PartNumber: DD1102 | Ean: 0610825040435 | UPC: 610825040435
The Build Is Quite Solid And Holds Firm, You Do Not Need To Be Heavy Handed With Using,Genuine One Handed Use If Needs Be..
Fit Perfectly In 3/4 Inch (19Mm) Holes And Clamp Very Tightly Without Moving Out Of The Borehole;The Cam Is Running Perfectly Parallel To The Pressure Plate Which Means Pressure Is Well Distributed..
High, Middle And Low Three Gears Are Adjustable, Different Clamping Forces Are Suitable For Different Working Conditions..
All Metal Construction,The Clamp Is Made Of Quality Aluminum Alloy And Stainless Steel;Perfect Workmanship,Very Well And Neatly Processed..
Features
- Bench dog clamp, no damage to the workpiece,simple operation;Own them, give new vitality to the workbench.
- All metal construction,the clamp is made of quality aluminum alloy and stainless steel;Perfect workmanship,very well and neatly processed.
- The build is quite solid and holds firm, you do not need to be heavy handed with using,genuine one handed use if needs be.
- High, middle and low three gears are adjustable, different clamping forces are suitable for different working conditions.
- Fit perfectly in 3/4 inch (19mm) holes and clamp very tightly without moving out of the borehole;The cam is running perfectly parallel to the pressure plate which means pressure is well distributed.
- See more on Amazon...
Brand: DDWT | Manufacturer: DDWT
Dimensions: 1.18 x 4.33 x 3.94 Inches
See On Amazon #4
DDWT 2 In 1 Mini Wood Carbide Insert Scraper Glue Scraper Remover Aluminum Alloy Handle Woodworking Tool,Black
Asin: B08R9Z7ZYG | Model: HD-CJ1225 | PartNumber: HD-CJ1225 | Ean: 0610825014757 | UPC: 610825014757
4 Sided Carbide Insert,Can Be Rotated Or Replaced,Never Need To Sharpen Again.
Mini Size Carbide Insert Scraper Perfect For Glue Removing And Auxiliary Repairing That Delivers A Finish Quality Cut In Tight Spaces Regular Scrapers And Sandpaper Can't Reach.
User Friendly Blade Hidden Warehouse, Intimate Spare Screws; We Designed Screw And Insert Storage In The Handle Which Make You Can Find The Screw And Insert Quickly And Storage It Well.
Comes With Square Blade And Cambered Blade To Meet Your Different Needs,Also Supports Replacement Carbide Inserts.
Features
- Aluminum alloy material ergonomic design handle, lightweight, comfortable handle feel, durable to use
- Comes with square blade and cambered blade to meet your different needs,also supports replacement carbide inserts
- 4 sided carbide Insert,can be rotated or replaced,never need to sharpen again
- User friendly blade hidden warehouse, intimate spare screws; we designed screw and insert storage in the handle which make you can find the screw and insert quickly and storage it well
- Mini size carbide insert scraper perfect for glue removing and auxiliary repairing that delivers a finish quality cut in tight spaces regular scrapers and sandpaper can't reach
- See more on Amazon...
Brand: DDWT | Manufacturer: DDWT
See On Amazon #5
DDWT 2 Pack MFT Style Hold Down Clamp Long Bench Dog Clamp 3/4 Inch Dog Hole Clamp Woodworking Benchtop Quick Clamps Aluminum Alloy (19mm) - Lengthened Version
Asin: B0BMVFGLK9 | Model: DD1118X2 | PartNumber: DD1118X2 | Ean: 0610825041678 | UPC: 610825041678
High, Middle And Low Three Gears Are Adjustable, Different Clamping Forces Are Suitable For Different Working Conditions; The Cam Is Running Perfectly Parallel To The Pressure Plate Which Means Pressure Is Well Distributed, No Damage To The Workpiece..
All Metal Construction,This Bench Dog Clamp Is Made Of Quality Aluminum Alloy And Stainless Steel; Perfect Workmanship,Very Well And Neatly Processed,Anodized Finish..
Fit Perfectly In 3/4 Inch (19Mm) Holes And Clamp Very Tightly Without Moving Out Of The Borehole; Great To Have The Speed And Convenience Of Not Having To Secure The Clamp With A Knob Under The Bench..
Easy To Clamp And Release, Just A Flip And The Levers Lock Your Workpiece Securely,Another Flip And The Workpiece Is Free..
Features
- 7.9 inch long shaft has greater clamping capacity,can clamp wood boards up to 5.9 inch thick.
- Easy to clamp and release, just a flip and the levers lock your workpiece securely,another flip and the workpiece is free.
- High, middle and low three gears are adjustable, different clamping forces are suitable for different working conditions; The cam is running perfectly parallel to the pressure plate which means pressure is well distributed, no damage to the workpiece.
- Fit perfectly in 3/4 inch (19mm) holes and clamp very tightly without moving out of the borehole; Great to have the speed and convenience of not having to secure the clamp with a knob under the bench.
- All metal construction,this bench dog clamp is made of quality aluminum alloy and stainless steel; Perfect workmanship,very well and neatly processed,anodized finish.
- See more on Amazon...
Brand: DDWT | Manufacturer: DDWT
Dimensions: 1.20 x 8.00 x 4.00 inches | Weight: 0.58 Kilograms
See On Amazon #6
HONGDUI DJ11S Chamfer Plane Edge Plane Corner Plane Quick Edge Trimmer Chamfering Tool with 3 Carbide Insert for Woodworking
Asin: B09WYHJM3V | Model: 11S | PartNumber: 11S | Ean: 0610825040497 | UPC: 610825040497
3. In Addition To Installing A Blade On The Left And Right Sides Of The Main Body, There Is Also A Spare Blade Hidden In The Middle Knob Screw..
7. Double Cutter Design, You Can Chamfer Rounded Corners And 45° At The Same Time..
8. With 3 Blades And Blade Storage Slot..
5. The Processing Depth Can Be Increased Or Decreased According To The Large Knob "+-"..
6. Can Used For 45 Degree Chamfer And R3 (1/8 Inch) Round Chamfer..
4. Two Spare Screws Are Installed On The Upper Right Of The Main Body For The User.
9. Adjustable Deepth Design, Mm And Inch Scales..
2. Original Right-Angle And Arc-Integrated Blade, (2 Sides Of Right Angle, 2 Sides Of Arc) Can Be Used Interchangeably..
Features
- 1. Innovative use of alloy discarded blades to get rid of the trouble of traditional sharpening.
- 2. Original right-angle and arc-integrated blade, (2 sides of right angle, 2 sides of arc) can be used interchangeably.
- 3. In addition to installing a blade on the left and right sides of the main body, there is also a spare blade hidden in the middle knob screw.
- 4. Two spare screws are installed on the upper right of the main body for the user
- 5. The processing depth can be increased or decreased according to the large knob +-.
- 6. Can used for 45 degree chamfer and R3 (1/8 inch) round chamfer.
- 7. Double cutter design, you can chamfer rounded corners and 45 at the same time.
- 8. With 3 blades and blade storage slot.
- 9. Adjustable deepth design, mm and inch scales.
- See more on Amazon...
Brand: HONGDUI | Manufacturer: HONGDUI
Dimensions: 1.97 x 6.10 x 0.79 inches
See On Amazon #7
DDWT Chamfer Plane Edge Plane Edge Banding Trimmer Veneer Edge Trimmer Edge Chamfer Burr Scraper for Woodworking (R1)
Asin: B0B2CD1H2Y | Model: DD220526 | PartNumber: DD220526 | Ean: 0610825041166 | UPC: 610825041166
Replaceable Tungsten Steel Blade And On One Blade Has Two Cutting Edge,Equivalent To You Get Two Blade.
3 Types Optional: The R1 Type Is Suitable For Both Thin And Thick Edge Banding, Thickness From 0.8Mm To 2.0Mm; R2 Type Is Suitable For The Thicker Edge Banding, Thickness From 1.5Mm To 2.0Mm; R3 Type Is Suitable For Solid Wood Board Chamfering.
This Edge Banding Trimmer With Portable Size And Easy To Carry.
Aluminum Alloy Body,Tungsten Steel Blade,Cnc Machined,Well Made And Sturdy.
Features
- This tool is used to chamfer and deburr edge banding to give sheets with smooth curved edges; It's not suitable if you want to cut off the the high edge of the tape
- Aluminum alloy body,tungsten steel blade,CNC machined,well made and sturdy
- Replaceable tungsten steel blade and on one blade has two cutting edge,equivalent to you get two blade
- This edge banding trimmer with portable size and easy to carry
- 3 Types Optional: The R1 type is suitable for both thin and thick edge banding, thickness from 0.8mm to 2.0mm; R2 type is suitable for the thicker edge banding, thickness from 1.5mm to 2.0mm; R3 type is suitable for solid wood board chamfering
- See more on Amazon...
Brand: DDWT | Manufacturer: DDWT
See On Amazon #8
DDWT Table Saw Thin Rip Jig Guide for Repeat Narrow Strip Cuts Works with Table Saw Router Table Band Saw - Ultimate Version
Asin: B0CD16YKNC | Model: GD704C | PartNumber: GD704C
Sliding Tenon Design,Adjustable Inward And Outward,Locks Down Solid Without Swaying From Side To Side,This Would Help Avoid The Rips Drift,Specifically Designed For Precision Cutting..
Equipped With Sliders And T-Bolts, Fit 3/8 X 3/4 Inch T-Slot And 1/4 X 3/8 Inch T-Slot Track, Can Work With Most Table Saw, Router Table And Band Saw..
The Thin Rip Tablesaw Jig Has 2 Guide Bearing On The Tip Play The Role Of Driving The Stock Forward,To Make Feeding Your Stock Through An Easy And Smooth Moving Process..
The Table Saw Jig Is Machined From Aluminum Alloy With Anodized Surface,Well Made,Metal Rigid Structure,Strong And Stable,Long Service Life..
Features
- This version is designed for those models where the T-slot is farther away from the saw blade, it can reach the saw blade 8.3 inch/210mm away from the T-slot. The telescopic effective stroke reaches 5.5 inch/140mm.
- The table saw jig is machined from aluminum alloy with anodized surface,well made,metal rigid structure,strong and stable,long service life.
- Sliding tenon design,adjustable inward and outward,locks down solid without swaying from side to side,this would help avoid the rips drift,specifically designed for precision cutting.
- The thin rip tablesaw jig has 2 guide bearing on the tip play the role of driving the stock forward,to make feeding your stock through an easy and smooth moving process.
- Equipped with sliders and T-bolts, fit 3/8 x 3/4 inch T-slot and 1/4 x 3/8 inch T-slot track, can work with most table saw, router table and band saw.
- See more on Amazon...
Brand: DDWT | Manufacturer: DDWT
Dimensions: 1.77 x 7.20 x 3.20 inches
See On Amazon #9
DDWT Router Plane Handheld Woodworking Tool Quick Adjust Depth with Depth Stop for Tuning Joinery Cutting Dados Grooves Mortise
Asin: B0C6T98W7K | Model: DD0601 | PartNumber: DD0601
Blade Width:12Mm, Razor-Sharp,Durable And Realizes Clean Cut Surface,You Can Start To Use It Right Out Of The Box.
This Hand Router Plane Is Designed To Help You Fine Tune Joinery,Cut Grooves,Rabbets And Dados,Create Perfect Mortises.
Solid Aluminum Grip,Comfortable Hand Feeling,Easy To Precisely Control The Tool.
Unique Blade Lift Mechanism,Feature With Depth Gauge And Depth Stop,Easy To Adjust The Depth Precisely,It Can Cut Up To 1.2 Inch (30 Mm) Deep.
Features
- 6061 Aluminum alloy body with anodized surface,stainless steel blade shaft,brass nut,high speed steel blade; Simple construction,stable performanc,ensure that it will withstand the rigors of woodworking, making it a reliable tool for years to come
- Unique blade lift mechanism,feature with depth gauge and depth stop,easy to adjust the depth precisely,it can cut up to 1.2 inch (30 mm) deep
- Blade width:12mm, razor-sharp,durable and realizes clean cut surface,you can start to use it right out of the box
- Solid aluminum grip,comfortable hand feeling,easy to precisely control the tool
- This hand router plane is designed to help you fine tune joinery,cut grooves,rabbets and dados,create perfect mortises
- See more on Amazon...
Brand: DDWT | Manufacturer: DDWT
See On Amazon #10
DDWT Woodworking Planing Stop Bench Dogs Clamp Workbench Table Accessories 3/4 inch (19mm) Dog Hole
Asin: B08N14BVYY | Model: DT1109 | PartNumber: DT1109 | Ean: 0610825014634 | UPC: 610825014634
Use Two Bench Dogs For Wide Boards Or Cross-Grain Work.
Made Of Aluminum Alloy, Durable To Use,Not Damage To The Surface Of The Workpiece,Not Ruin Plane In Accidentally.
The Stop Can Slide On The Board, Fits All Kinds Table Surface.
Fits Standard 3/4 Inch (19Mm) Diameter Bench Dog Hole.
Features
- A perfect holding solution when hand planing thin or wide stock, allows planing of boards as thin as 7mm, Prevents the workpiece from skewing under your plane
- Fits standard 3/4 inch (19mm) diameter Bench Dog hole
- Use two bench dogs for wide boards or cross-grain work
- The stop can slide on the board, fits all kinds table surface
- Made of aluminum alloy, durable to use,not damage to the surface of the workpiece,not ruin plane in accidentally
- See more on Amazon...
Brand: DDWT | Manufacturer: DDWT
Dimensions: 1.46 x 10.24 x 1.18 inches
See On Amazon #11
DDWT Metric Setup Blocks Woodworking Setup Bars 9 Pcs Precision Aluminum Alloy Height Gauge Set for Router and Table Saw
Asin: B0BFHS3QJ7 | Model: ZQ22-12 | PartNumber: ZQ22-12 | Ean: 0610825041302 | UPC: 610825041302
Bright Color With White Laser Engraved Mark,Easy To Read And Won't Wear Out.
Set Up Blocks Give You Precise Physical References To Gauge The Height Of A Cutter Or The Position Of A Fence; Just Select The Block Clearly Marked With Your Desired Dimension, Place It Beside Your Machine Tool And Adjust; Use Both Your Senses Of Sight And Touch To Dial In A Perfect Fit.
Come With A Storage Case,All The Parts Are Perfectly Placed In Its Hole,Keeping Them In Organized And Safe.
Machined From Solid Aluminum Alloy With Anodized Finish,Makes Them Lighter,Durable And Corrosion Resistant.
Features
- Setup blocks size:1mm,2mm,4mm,6.5mm,8mm,16mm,18mm,32mm,25x50x100mm;Each block is machined to within 0.01mm accuracy
- Machined from solid aluminum alloy with anodized finish,makes them lighter,durable and corrosion resistant
- Bright color with white laser engraved mark,easy to read and won't wear out
- Come with a storage case,all the parts are perfectly placed in its hole,keeping them in organized and safe
- Set up blocks give you precise physical references to gauge the height of a cutter or the position of a fence; Just select the block clearly marked with your desired dimension, place it beside your machine tool and adjust; Use both your senses of sight and touch to dial in a perfect fit
- See more on Amazon...
Brand: DDWT | Manufacturer: DDWT
See On Amazon #12
DDWT MFT Style Hold Down Clamp Bench Dog Clamp 20mm Dog Hole Clamp Woodworking Benchtop Quick Clamps Aluminum Alloy (20mm)
Asin: B09M3J85FY | Model: DD1102 | PartNumber: DD1102 | Ean: 0610825040749 | UPC: 610825040749
The Build Is Quite Solid And Holds Firm, You Do Not Need To Be Heavy Handed With Using,Genuine One Handed Use If Needs Be..
Fit Perfectly In 20Mm Holes And Clamp Very Tightly Without Moving Out Of The Borehole;The Cam Is Running Perfectly Parallel To The Pressure Plate Which Means Pressure Is Well Distributed..
High, Middle And Low Three Gears Are Adjustable, Different Clamping Forces Are Suitable For Different Working Conditions..
All Metal Construction,The Clamp Is Made Of Quality Aluminum Alloy And Stainless Steel;Perfect Workmanship,Very Well And Neatly Processed..
Features
- Bench dog clamp, no damage to the workpiece,simple operation;Own them, give new vitality to the workbench.
- All metal construction,the clamp is made of quality aluminum alloy and stainless steel;Perfect workmanship,very well and neatly processed.
- The build is quite solid and holds firm, you do not need to be heavy handed with using,genuine one handed use if needs be.
- High, middle and low three gears are adjustable, different clamping forces are suitable for different working conditions.
- Fit perfectly in 20mm holes and clamp very tightly without moving out of the borehole;The cam is running perfectly parallel to the pressure plate which means pressure is well distributed.
- See more on Amazon...
Brand: DDWT | Manufacturer: DDWT
Dimensions: 1.18 x 4.33 x 3.94 inches
See On Amazon #13
DDWT 4 Pack Aluminum Alloy Bench Dogs Woodworking Clamp for 3/4 Inch (19mm) Dog Hole (Silver)
Asin: B0BBP4Z2NL | Model: DD0824A | PartNumber: DD0824A | Ean: 0610825041272 | UPC: 610825041272
Fits 3/4 Inch (19Mm) Diameter Dog Holes, Tight Tolerance, It Can Be Fixed Directly By Placing It Into Mft Bench.
Bench Dogs Are An Essential Hold Down Device That Should Be A Part Of Any Workbench,Great For Planing, Routing, Cutting, And Sanding.
Square Contact Surface,Provide Non-Marring And Secure Hold On Your Wood Stock.
Low-Profile Design, So Will Not Interfere When Planing Or Sanding Thinner Material; No Need To Worry About Damaging Plane Blades Because It Is Always Lower Than What You Want To Plane.
Features
- Machined from aluminum alloy with anodized surface; compared to plastic or nylon bench dog, it can withstand higher-strength working conditions and is more durable
- Low-profile design, so will not interfere when planing or sanding thinner material; no need to worry about damaging plane blades because it is always lower than what you want to plane
- Fits 3/4 inch (19mm) diameter dog holes, tight tolerance, it can be fixed directly by placing it into MFT bench
- Square contact surface,provide non-marring and secure hold on your wood stock
- Bench dogs are an essential hold down device that should be a part of any workbench,great for planing, routing, cutting, and sanding
- See more on Amazon...
Brand: DDWT | Manufacturer: DDWT
See On Amazon #14
DDWT MFT Style Hold Down Clamp Bench Dog Clamp 3/4 Inch Dog Hole Clamp Woodworking Benchtop Quick Clamps Aluminum Alloy (19mm)
Asin: B09KTQPMXH | Model: DD1102 | PartNumber: DD1102 | Ean: 0610825040732 | UPC: 610825040732
The Build Is Quite Solid And Holds Firm, You Do Not Need To Be Heavy Handed With Using,Genuine One Handed Use If Needs Be..
Fit Perfectly In 3/4 Inch (19Mm) Holes And Clamp Very Tightly Without Moving Out Of The Borehole;The Cam Is Running Perfectly Parallel To The Pressure Plate Which Means Pressure Is Well Distributed..
High, Middle And Low Three Gears Are Adjustable, Different Clamping Forces Are Suitable For Different Working Conditions..
All Metal Construction,The Clamp Is Made Of Quality Aluminum Alloy And Stainless Steel;Perfect Workmanship,Very Well And Neatly Processed..
Features
- Bench dog clamp, no damage to the workpiece,simple operation;Own them, give new vitality to the workbench.
- All metal construction,the clamp is made of quality aluminum alloy and stainless steel;Perfect workmanship,very well and neatly processed.
- The build is quite solid and holds firm, you do not need to be heavy handed with using,genuine one handed use if needs be.
- High, middle and low three gears are adjustable, different clamping forces are suitable for different working conditions.
- Fit perfectly in 3/4 inch (19mm) holes and clamp very tightly without moving out of the borehole;The cam is running perfectly parallel to the pressure plate which means pressure is well distributed.
- See more on Amazon...
Brand: DDWT | Manufacturer: DDWT
Dimensions: 1.18 x 4.33 x 3.94 inches
See On Amazon #15
DDWT 5 Pack Aluminum Alloy Bench Dogs Woodworking Clamp MFT Table Stop with Non-slip Pad for 3/4 Inch (19mm) Dog Hole
Asin: B0BS9C59M7 | Model: DD-230113 | PartNumber: DD-230113 | Ean: 0610825041746 | UPC: 610825041746
Fits 3/4 Inch (19Mm) Diameter Dog Holes, Tight Tolerance, It Can Be Fixed Directly By Placing It Into Mft Bench.
Bench Dogs Are An Essential Hold Down Device That Should Be A Part Of Any Workbench,Great For Planing, Routing, Cutting And Sanding.
They Have Two Flat Sides And An Anti-Slip Pad On The Top,Very Handy To Use;The Anti-Slip Pad Also Can Prevents The Workpiece From Scratching.
Low-Profile Design, So Will Not Interfere When Planing Or Sanding Thinner Material; No Need To Worry About Damaging Plane Blades Because It Is Always Lower Than What You Want To Plane.
Features
- Machined from aluminum alloy,anodized surface; compared to plastic or nylon bench dog, it can withstand higher-strength working conditions and it is more durable
- Low-profile design, so will not interfere when planing or sanding thinner material; no need to worry about damaging plane blades because it is always lower than what you want to plane
- Fits 3/4 inch (19mm) diameter dog holes, tight tolerance, it can be fixed directly by placing it into MFT bench
- They have two flat sides and an anti-slip pad on the top,very handy to use;the anti-slip pad also can prevents the workpiece from scratching
- Bench dogs are an essential hold down device that should be a part of any workbench,great for planing, routing, cutting and sanding
- See more on Amazon...
Brand: DDWT | Manufacturer: DDWT
See On Amazon #16
DDWT MFT Style Hold Down Clamp Long Bench Dog Clamp 3/4 Inch Dog Hole Clamp Woodworking Benchtop Quick Clamps Aluminum Alloy (19mm) - Lengthened Version
Asin: B0BMVCW5YS | Model: DD1118 | PartNumber: DD1118 | Ean: 0610825041661 | UPC: 610825041661
High, Middle And Low Three Gears Are Adjustable, Different Clamping Forces Are Suitable For Different Working Conditions; The Cam Is Running Perfectly Parallel To The Pressure Plate Which Means Pressure Is Well Distributed, No Damage To The Workpiece..
All Metal Construction,This Bench Dog Clamp Is Made Of Quality Aluminum Alloy And Stainless Steel; Perfect Workmanship,Very Well And Neatly Processed,Anodized Finish..
Fit Perfectly In 3/4 Inch (19Mm) Holes And Clamp Very Tightly Without Moving Out Of The Borehole; Great To Have The Speed And Convenience Of Not Having To Secure The Clamp With A Knob Under The Bench..
Easy To Clamp And Release, Just A Flip And The Levers Lock Your Workpiece Securely,Another Flip And The Workpiece Is Free..
Features
- 7.9 inch long shaft has greater clamping capacity,can clamp wood boards up to 5.9 inch thick.
- Easy to clamp and release, just a flip and the levers lock your workpiece securely,another flip and the workpiece is free.
- High, middle and low three gears are adjustable, different clamping forces are suitable for different working conditions; The cam is running perfectly parallel to the pressure plate which means pressure is well distributed, no damage to the workpiece.
- Fit perfectly in 3/4 inch (19mm) holes and clamp very tightly without moving out of the borehole; Great to have the speed and convenience of not having to secure the clamp with a knob under the bench.
- All metal construction,this bench dog clamp is made of quality aluminum alloy and stainless steel; Perfect workmanship,very well and neatly processed,anodized finish.
- See more on Amazon...
Brand: DDWT | Manufacturer: DDWT
Dimensions: 1.20 x 8.00 x 4.00 inches
See On Amazon #17
Adjustable Table Feather Loc Boards, Dual Bearing Roller Aluminum Alloy Multi-Purpose Feather Loc Board Woodworking Table Saw Pressing Feeder Guider Carpentry Safety Pushing Tools
Asin: B0BY2B12SW
Double Bearing Rollers: Unique Roller System Holds Down Workpiece And Pushes Into Fence For Precision Stock Feed. Double Bearing Rollers, Tilt Feed, Can Adapt To A Variety Of Plates And Thickness, Flexible Adjustment Of Roller Height. Double Slider Fixed, The Power Is Sufficient, Stable And Not Shock, The Wood Advances Smoothly Without Obstruction..
Nice Performance: Compared With Traditional Feather Board, With Tilt Angle Pulley, With Guide Function, Safer Operation, Wood Does Not Play, High Accuracy, And Better Smoothness..
Widely Application: It Can Be Used In The #30 Or #45 Standard Slot, Or Replaced With Small Sliders And Fixed In The T-Slot Or On The Back Of The Support. It Can Be Used For More Consoles Such As Table Saws, Band Saws, Inverted Carving Machine, Etc. Note: Can Not Be Used On Boards Less Than 1 Inch Thick, Otherwise The Wood Will Be Stuck In The Wheel..
Material: The Main Body Is Made Of High-Strength Aluminum Alloy, With Anodized Surface, Which Has Nice Durability, Wear Resistant And Not Easy To Rust. The Wheel Is Made Of Rubber, Increasing Friction And Has A Nice Shock-Absorbing Effect..
Features
- Features: Equipped with T-shaped screw and chute nut, which can be used for table saw, band saw, inverted engraving machine and other more operating platforms. The pressing wheel increases the friction force, has good shock absorption effect, the board is not easy to deviate, and the propulsion is smooth and unimpeded.
- Material: The main body is made of high-strength aluminum alloy, with anodized surface, which has nice durability, wear resistant and not easy to rust. The wheel is made of rubber, increasing friction and has a nice shock-absorbing effect.
- Double bearing rollers: Unique roller system holds down workpiece and pushes into fence for precision stock feed. Double bearing rollers, tilt feed, can adapt to a variety of plates and thickness, flexible adjustment of roller height. Double slider fixed, the power is sufficient, stable and not shock, the wood advances smoothly without obstruction.
- Widely Application: It can be used in the #30 or #45 standard slot, or replaced with small sliders and fixed in the T-slot or on the back of the support. It can be used for more consoles such as table saws, band saws, inverted carving machine, etc. Note: Can not be used on boards less than 1 inch thick, otherwise the wood will be stuck in the wheel.
- Nice Performance: Compared with traditional feather board, with tilt angle pulley, with guide function, safer operation, wood does not play, high accuracy, and better smoothness.
- See more on Amazon...
Brand: SYWAN | Manufacturer: Big waves
See On Amazon #18
2 In 1 Mini Wood Carbide Insert Scraper & HONGDUI Chamfer Plane with 3 Carbide Insert
Asin: B0BMG3G7D7
Product 1:4 Sided Carbide Insert,Can Be Rotated Or Replaced,Never Need To Sharpen Again.
Product 2:Double Cutter Design, It Holds Two Cutters At A Time, You Can Chamfer Rounded Corner And 45 Degree At The Same Time, No Need To Change Cutter.
Product 2:Designed For 45 Degree Chamfer And R3 (1/8 Inch) Round Edge Trimming,One Single Carbide Insert Features Both Straight And 1/8 Inch Round Cutting Abilities.
Product 1:Comes With Square Blade And Cambered Blade To Meet Your Different Needs,Also Supports Replacement Carbide Inserts.
Features
- Product 1:Aluminum alloy material ergonomic design handle, lightweight, comfortable handle feel, durable to use
- Product 1:Comes with square blade and cambered blade to meet your different needs,also supports replacement carbide inserts
- Product 1:4 sided carbide Insert,can be rotated or replaced,never need to sharpen again
- Product 2:Designed for 45 degree chamfer and R3 (1/8 inch) round edge trimming,one single carbide insert features both straight and 1/8 inch round cutting abilities
- Product 2:Double cutter design, it holds two cutters at a time, you can chamfer rounded corner and 45 degree at the same time, no need to change cutter
- See more on Amazon...
Brand: DDWT
See On Amazon #19
2 Pack MFT Style Hold Down Clamp (19mm) & 4 Pack 3/4 Inch Aluminum Alloy Bench Dogs
Asin: B0BMG43YM2
Product 1:The Build Is Quite Solid And Holds Firm, You Do Not Need To Be Heavy Handed With Using,Genuine One Handed Use If Needs Be.High, Middle And Low Three Gears Are Adjustable.
Product 2:Low-Profile Design, So Will Not Interfere When Planing Or Sanding Thinner Material; No Need To Worry About Damaging Plane Blades Because It Is Always Lower Than What You Want To Plane.
Product 2:Machined From Aluminum Alloy With Anodized Surface; Compared To Plastic Or Nylon Bench Dog, It Can Withstand Higher-Strength Working Conditions And Is More Durable.
Product 1:All Metal Construction,The Clamp Is Made Of Quality Aluminum Alloy And Stainless Steel;Perfect Workmanship,Very Well And Neatly Processed..
Features
- Product 1:Bench dog clamp, no damage to the workpiece,simple operation;Own them, give new vitality to the workbench.
- Product 1:All metal construction,the clamp is made of quality aluminum alloy and stainless steel;Perfect workmanship,very well and neatly processed.
- Product 1:The build is quite solid and holds firm, you do not need to be heavy handed with using,genuine one handed use if needs be.High, middle and low three gears are adjustable
- Product 2:Machined from aluminum alloy with anodized surface; compared to plastic or nylon bench dog, it can withstand higher-strength working conditions and is more durable
- Product 2:Low-profile design, so will not interfere when planing or sanding thinner material; no need to worry about damaging plane blades because it is always lower than what you want to plane
- See more on Amazon...
Brand: DDWT
See On Amazon
Looking For Something Else?
Search