Car Trunk Spoiler Roof Lip Kit,3D PU Rear Trunk Lip or Roof Spoiler Sticker Bar with Carbon Fiber Pattern,Car Rear Spoiler Exterior Rear Spoiler Kit, Punch-Free Installation for Most Cars (Carbon)
Asin: B0BCPZ9P8B | Model: WY001 | PartNumber: WY001
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Bendable】It Can Be Bent Freely, Can Be Adjusted According To The Radian, Freely Fit, And Highly Fit..
【Function】The Trunk Spoiler Can Increase The Streamlined Appearance Of The Car, Making Your Car Look Cooler And More Stylish. Pair With Any Car Lip For An Aggressive Sporty Look, Improve Aerodynamics And Add Style To Your Car..
【Installation Steps】① Measure The Length Required For Installation, And Cut Off The Excess Part. ② Make Sure The Installation Location Is Clean And Dry. ③Tear Off The Protective Film Of The Double-Sided Tape (The Double-Sided Tape Will Stick More Tightly If It Is Slightly Heated With A Hot Air Blower). ④ Install The Sleeves On Both Ends, And Then Glue Them On Slowly. ⑤ Finally, Press Firmly In All Directions To Make Sure All Places Are Tightly Connected..
【High Quality Material】Made Of Soft And Durable Pu Material, The Surface Is Smooth And Bright..
Features
- Dimensions Length is 59 inches and width is 1.38 inches. Double-sided tape on the back for easy peel and stick installation.
- High Quality Material Made of soft and durable PU material, the surface is smooth and bright.
- Bendable It can be bent freely, can be adjusted according to the radian, freely fit, and highly fit.
- Installation Steps Measure the length required for installation, and cut off the excess part. Make sure the installation location is clean and dry. Tear off the protective film of the double-sided tape (the double-sided tape will stick more tightly if it is slightly heated with a hot air blower). Install the sleeves on both ends, and then glue them on slowly. Finally, press firmly in all directions to make sure all places are tightly connected.
- Function The trunk spoiler can increase the streamlined appearance of the car, making your car look cooler and more stylish. Pair with any car lip for an aggressive sporty look, improve aerodynamics and add style to your car.
- See more on Amazon...
Brand: Banseko | Manufacturer: Banseko
Dimensions: 1.00 x 1.00 x 1.00 inches
Warranty: no
See On Amazon Similar To Car Trunk Spoiler Roof Lip
#1
Seeutek GT Wing Spoiler 43.3 Inch Lightweight Aluminum Single Rear Wing, Adjustable Angle Car Spoiler Universal, Rear Spoiler for Cars Single Deck Black
Asin: B0B1DJPVZV | Model: BZ-981-128 | PartNumber: BZ-981-128
🚓 Adjustable Angels: The Angle Of This Racing Wing Spoiler Can Be Adjusted According To Car Models And Different Needs. This Universal Spoiler Is Suitable For Most Car With A Rear Trunk..
🚕 Sporty And Stylish Design: The Universal Car Wing With Smooth Lines And Cool Style, Installed On The Car Will Make The Car A Brand-New Look And Definitely Make Others An Impression..
🚗 Enhances Aerodynamic: This Car Wing Can Effectively Reduce Air Resistance And Car Fuel Consumption, And Improve Adhesion To The Ground To Make The Car More Stable At High Speed..
🚕 High-Quality Materials: This Spoilers For Cars Is Made Of Aluminum Alloy, Which Is Not Only Lightweight But Also Sturdy And Durable. Capable Of Withstanding Exposure To Weather Without Damage..
Features
- Rear Spoiler Length: Wing Length: 43.3"(110cm); Distance between two brackets: 19"(48cm)
- High-Quality Materials: This spoilers for cars is made of aluminum alloy, which is not only lightweight but also sturdy and durable. Capable of withstanding exposure to weather without damage.
- Adjustable Angels: The angle of this racing wing spoiler can be adjusted according to car models and different needs. This universal spoiler is suitable for most car with a rear trunk.
- Enhances Aerodynamic: This car wing can effectively reduce air resistance and car fuel consumption, and improve adhesion to the ground to make the car more stable at high speed.
- Sporty and Stylish Design: The universal car wing with smooth lines and cool style, installed on the car will make the car a brand-new look and definitely make others an impression.
- See more on Amazon...
Brand: Seeutek | Manufacturer: Seeutek
Weight: 6.60 pounds
Warranty: 1 YEAR
See On Amazon #2
Miytsya 2 PCS Car Fender Side Vents, ABS Carbon Fiber Spoiler, Fender Decorative Stickers, Air Flow Intake Hole Grille Auto Exterior Accessories Universal (Carbon Fiber Black)
Asin: B0BDYK7PDZ | Model: MIFZT506CO-2PS | PartNumber: MIFZT506CO-2PS
★ Features: Popular Fender Fin Duct. It's A Mini Type That Doesn't Boldly Claim, But Its Presence Is Outstanding. Give The Car Body An Outstanding Look. The Side Of The Car Is More Luxurious Than It Was Originally..
★ After Sale: If You Have Any Question On Use, Kindly Contact Us At Any Time Directly, We Will Solve The Problem For You Within 24 Hours On Weekdays..
★ Installation: 1. Be Sure To Check The Fitting Before Installation. 2. Before Installing, Wipe Off The Car Body And Attach It. 3. Carefully Place The Product In The Correct Position, Apply The Trim And Press It To Ensure It Has Good Adhesion. 4. Do Not Wash The Car For 24 Hours To Get Good Adhesion..
★ Material: High Quality Abs Plastic Material For Long Time Use..
Features
- Size Detail: Length-16.1in(41cm), width-3.5in(9cm), thickness-0.6in(1.5cm).
- Material: High quality ABS plastic material for long time use.
- Features: Popular fender fin duct. It's a mini type that doesn't boldly claim, but its presence is outstanding. Give the car body an outstanding look. The side of the car is more luxurious than it was originally.
- Installation: 1. Be sure to check the fitting before installation. 2. Before installing, wipe off the car body and attach it. 3. Carefully place the product in the correct position, apply the trim and press it to ensure it has good adhesion. 4. Do not wash the car for 24 hours to get good adhesion.
- After Sale: If you have any question on use, kindly contact us at any time directly, we will solve the problem for you within 24 hours on weekdays.
- See more on Amazon...
Brand: Miytsya | Manufacturer: Miytsya
Dimensions: 0.10 x 16.10 x 3.50 inches
Warranty: NO
See On Amazon #3
ECOTRIC Rear Trunk Spoiler Wing Compatible with 2006-2011 Honda Civic 4 Door Sedan ABS Trunk Spoiler Wing Painted Gloss Black
Asin: B08KQ4Q9MZ
Package Including: 1 X Rear Trunk Spoiler Wing. ( All Hardware Included. As The Picture Shown.).
Installation: Easy Installation. Drilling May Be Required. Instructions Not Included..
Increase Aerodynamic Performance: Effectively Reduce And Overcome The Influence Of Air Resistance When The Car Is Driving At High Speed. The Wind Resistance Coefficient Is Reduced, So That The Car Can Drive Close To The Road Surface, Thereby Improving The Stability Of Driving..
Fitment: Compatible With 2006 2007 2008 2009 2010 2011 Honda Civic 4 Door Sedan Trunk. Direct Replacements For Damaged Rear Trunk Spoiler Wing..
Features
- FEATURE: Made of High Quality ABS Plastic Material. Color: Gloss Black. Surface Finish: Painted. Style: MU Style. Placement on Vehicle: Rear.
- FITMENT: Compatible with 2006 2007 2008 2009 2010 2011 Honda Civic 4 Door Sedan Trunk. Direct replacements for damaged rear trunk spoiler wing.
- PACKAGE INCLUDING: 1 x Rear Trunk Spoiler Wing. ( ALL HARDWARE INCLUDED. As the picture shown.)
- INCREASE AERODYNAMIC PERFORMANCE: Effectively reduce and overcome the influence of air resistance when the car is driving at high speed. The wind resistance coefficient is reduced, so that the car can drive close to the road surface, thereby improving the stability of driving.
- INSTALLATION: Easy installation. Drilling may be required. Instructions NOT included.
- See more on Amazon...
Brand: ECOTRIC | Manufacturer: ECOTRIC
Warranty: No Warranty
See On Amazon #4
2Pcs Rear Bumper Diffuser Spoilers for Cars, Rear Bumper Canard Diffuser Splitter Protector, Universal Rear Bumper Lip Splitter Diffuser Spoiler Kit Exterior Decorations for Car (Black)
Asin: B0C9HK35MD | Model: 1 | PartNumber: 1
[Universal Type]: Universal Rear Bumper Lip Body Kit Rear Side Skirt Valence Spoiler Car Exterior Decorations, Suitable For Most Models, Used For The Rear Bumper, Effectively Prevent The Collision Between The Body..
[What You Will Get]: The Package Includes 2*Lower Bumper Lip Canards Deflector, 6 Screws, Create Precise Corners, The Overall Shape Is More Beautiful, The Arc Is More Smooth, And Will Not Affect The Vehicle Passability..
[Easy To Install]: Clean Where You Need To Install, Install To Your Bumper With Screws (If There Are No Screw Holes To Drill).
[Function]: Our Car Side Fender Skirt Lip Splitter Canard Protector Protects Your Car's Rear Bumper From Collision Damage Or Scratches When Parked, While Giving Your Car A Boost And Showing Off Its Unique Sporty Look..
Features
- [High quality]: This Rear Bumper Canard Diffuser Splitter Protector adopts high-quality ABS material, carbon fiber pattern coating and Black coating, anti-corrosion, anti-rust, waterproof, high temperature resistance, never fade, durable.
- [Function]: Our Car Side Fender Skirt Lip Splitter Canard Protector protects your car's rear bumper from collision damage or scratches when parked, while giving your car a boost and showing off its unique sporty look.
- [Universal type]: Universal Rear Bumper Lip Body Kit Rear Side Skirt Valence Spoiler Car Exterior Decorations, suitable for most models, used for the rear bumper, effectively prevent the collision between the body.
- [Easy to install]: Clean where you need to install, install to your bumper with screws (if there are no screw holes to drill)
- [What you will get]: The package includes 2*lower bumper lip canards deflector, 6 screws, create precise corners, the overall shape is more beautiful, the arc is more smooth, and will not affect the vehicle passability.
- See more on Amazon...
Brand: Jsorum | Manufacturer: Jsorum
Warranty: No Applicable
See On Amazon #5
EZ Lip The Original Universal Fit 1-Inch Lip Spoiler for Bumper
Asin: B009F10S3Y | Model: EZ-LIP 001 | PartNumber: EZ-LIP 001 | Ean: 0862416000001 | UPC: 862416000001
Super Strong 3M Adhesive – Ez Lip Installs With High Quality 3M Adhesive That Can Withstand The Harshest Climates. With Proper Installation, Our Products Easily Withstand Car Washes And High Speeds..
Made In Usa Quality – Designed And Manufactured In The Usa With Top Quality Materials And Craftsmanship. You Can Relax Knowing We Offer The Best Quality Universal-Fit Products..
One Size Fits All – Flexible Design Molds And Bends To The Shape Of Your Vehicle. You Can Choose To Install On The Front, Sides Or Rear. Universal Compatibility Works On Any Make Or Model..
Fast & Easy Installation – Just 3 Easy Steps And You’Ll Lower Your Car By Up To 1 Inch. No Drilling Or Screws Are Required. Just Peel, Stick And Cut!.
Features
- ENHANCE & PROTECT YOUR RIDE The EZ Lip Front Splitter is a fast, easy, and low-cost way to give your car an aggressive appearance while protecting from scrapes and scratches.
- FAST & EASY INSTALLATION Just 3 easy steps and you ll lower your car by up to 1 inch. No drilling or screws are required. Just peel, stick and cut!
- SUPER STRONG 3M ADHESIVE EZ Lip installs with high quality 3M adhesive that can withstand the harshest climates. With proper installation, our products easily withstand car washes and high speeds.
- ONE SIZE FITS ALL Flexible design molds and bends to the shape of your vehicle. You can choose to install on the front, sides or rear. Universal compatibility works on any make or model.
- MADE IN USA QUALITY Designed and manufactured in the USA with top quality materials and craftsmanship. You can relax knowing we offer the best quality universal-fit products.
- See more on Amazon...
Brand: EZ Lip | Manufacturer: EZ Lip
Dimensions: 7.87 x 7.87 x 3.15 inches | Weight: 0.66 pounds
See On Amazon #6
Car Trunk Spoiler Roof Lip Kit,3D PU Rear Trunk Lip or Roof Spoiler Sticker Bar with Carbon Fiber Pattern,Car Rear Spoiler Exterior Rear Spoiler Kit, Punch-Free Installation for Most Cars (Black)
Asin: B0BCQJX1SZ | Model: WY001 | PartNumber: WY001
【Bendable】It Can Be Bent Freely, Can Be Adjusted According To The Radian, Freely Fit, And Highly Fit..
【Function】The Trunk Spoiler Can Increase The Streamlined Appearance Of The Car, Making Your Car Look Cooler And More Stylish. Pair With Any Car Lip For An Aggressive Sporty Look, Improve Aerodynamics And Add Style To Your Car..
【Installation Steps】① Measure The Length Required For Installation, And Cut Off The Excess Part. ② Make Sure The Installation Location Is Clean And Dry. ③Tear Off The Protective Film Of The Double-Sided Tape (The Double-Sided Tape Will Stick More Tightly If It Is Slightly Heated With A Hot Air Blower). ④ Install The Sleeves On Both Ends, And Then Glue Them On Slowly. ⑤ Finally, Press Firmly In All Directions To Make Sure All Places Are Tightly Connected..
【High Quality Material】Made Of Soft And Durable Pu Material, The Surface Is Smooth And Bright..
Features
- Dimensions Length is 59 inches and width is 1.38 inches. Double-sided tape on the back for easy peel and stick installation.
- High Quality Material Made of soft and durable PU material, the surface is smooth and bright.
- Bendable It can be bent freely, can be adjusted according to the radian, freely fit, and highly fit.
- Installation Steps Measure the length required for installation, and cut off the excess part. Make sure the installation location is clean and dry. Tear off the protective film of the double-sided tape (the double-sided tape will stick more tightly if it is slightly heated with a hot air blower). Install the sleeves on both ends, and then glue them on slowly. Finally, press firmly in all directions to make sure all places are tightly connected.
- Function The trunk spoiler can increase the streamlined appearance of the car, making your car look cooler and more stylish. Pair with any car lip for an aggressive sporty look, improve aerodynamics and add style to your car.
- See more on Amazon...
Brand: Banseko | Manufacturer: Banseko
Dimensions: 1.00 x 1.00 x 1.00 inches
Warranty: no
See On Amazon #7
3Pcs Universal Car Mini Spoiler Wing, Creatiee Auto Car Tail Wing Mini Auto Carbon Fiber Texture Decoration Without Perforation Tail Decoration, 6.7 Inch(Black)
Asin: B07DQC1SV3 | Ean: 4865130680722
【Lossless Installation & Super Sticky】No Drilling Needed, Install It With Super Sticky Double-Sided Tape. Please Clean The Surface Of The Target With Detergent Before Stick It On..
【Cute & Unique Decoration】Mini Personality Design Gives Your Car A Completely Cute And Unique Look..
【Latest Design Gt Wing】Latest Design Gt Wing Spoiler Completed Kit, Improve Handling And Make Tail More Stable In High Speed..
【Overall Size】Approx. 6.7'' X 1.4'' X 1.4''(17Cm X 3.6Cm X 3.6Cm)..
Features
- Premium Material Made of strengthened ABS plastic material, and there is carbon fiber texture on the surface.
- Overall Size Approx. 6.7'' x 1.4'' x 1.4''(17cm x 3.6cm x 3.6cm).
- Lossless Installation & Super Sticky No drilling needed, install it with super sticky double-sided tape. Please clean the surface of the target with detergent before stick it on.
- Latest Design GT Wing Latest design GT wing spoiler completed kit, improve handling and make tail more stable in high speed.
- Cute & Unique Decoration Mini personality design gives your car a completely cute and unique look.
- See more on Amazon...
Brand: CREATIEE-PRO | Manufacturer: Creatiee
Warranty: 30 day
See On Amazon #8
Car Rear Spoiler Roof Lip Kit, Carbon Fiber 3D Rubber Trunk Spoiler Trim Strip Cool Car Decoration, Universal Punch-Free Vehicle Exterior Accessory Sticker (Carbon Fiber Black)
Asin: B0CN8Q98CZ | Model: Car Rear Spoiler Roof Lip Kit | PartNumber: Car Rear Spoiler Roof Lip Kit
【Comprehensive Body Protection】:This Spoiler Wing Can Protect Multiple Parts Of Your Car, Such As Front And Rear Bumpers, Front And Rear Lips, Side Skirts, And Tailgate, Keeping Your Car Safe From Scratches And Collisions.It Can Be Bent Freely, Adjustable According To The Curvature, Free Fit And High Fit..
【Non Punching Installation】:The Roof Spoiler Is Fixed With A Strong Adhesive Bottom. ①Measure The Length Required For Installation And Cut Off The Excess. ② Wipe The Car Adhesion Area Clean. ③Remove The Protective Film From The Double-Sided Adhesive Tape. Use A Hot Air Blower To Slightly Heat The Double-Sided Adhesive Tape To Make It Stick Tighter..
【Wide Applications】:A Car Rubber Spoiler Can Be Installed On The Trunk, Root Wing, Or Hood Of Your Car, Adding A Stylish And Streamlined Appearance. It Not Only Decorates Your Car But Also Improves Driving Stability, Fuel Efficiency, And Ride Quality. The Linear Design Enhances The Performance Of Your Car's Engine And Maximizes Its Overall Performance..
【High Quality Material】:The Rear Spoiler Is Made Of High-Quality Rubber With A Smooth And Shiny Surface That Is Smooth And Glossy In The Sun. It Has Excellent Flexibility While Maintaining A Degree Of Hardness For Reliability And Durability..
Features
- Dimensions :57.75 inches long and 1.45 inches wide. GM Rubber Spoiler is very flexible and cuttable, it fits perfectly in any car trunk or roof. Fits any car, truck, SUV.
- High Quality Material :The rear spoiler is made of high-quality rubber with a smooth and shiny surface that is smooth and glossy in the sun. It has excellent flexibility while maintaining a degree of hardness for reliability and durability.
- Comprehensive Body Protection :This spoiler wing can protect multiple parts of your car, such as front and rear bumpers, front and rear lips, side skirts, and tailgate, keeping your car safe from scratches and collisions.It can be bent freely, adjustable according to the curvature, free fit and high fit.
- Wide Applications :A car rubber spoiler can be installed on the trunk, root wing, or hood of your car, adding a stylish and streamlined appearance. It not only decorates your car but also improves driving stability, fuel efficiency, and ride quality. The linear design enhances the performance of your car's engine and maximizes its overall performance.
- Non Punching Installation :The roof spoiler is fixed with a strong adhesive bottom. Measure the length required for installation and cut off the excess. Wipe the car adhesion area clean. Remove the protective film from the double-sided adhesive tape. Use a hot air blower to slightly heat the double-sided adhesive tape to make it stick tighter.
- See more on Amazon...
Brand: JOYCOURT | Manufacturer: JOYCOURT
Dimensions: 1.61 x 10.62 x 1.45 inches
Warranty: 0.2
See On Amazon #9
4pcs Car Lower Bumper Lip Diffuser, Anti-Crash Accessories Spoiler Fin Protector, Rear Splitter Lip Wing with Screw, Universal Auto Decoration for Car SUV Truck
Asin: B0BNPX38SV | Model: Wing Lip Diffuser | PartNumber: Wing Lip Diffuser
【Universal Fit】: The Package Contains 4 Rear Diffuser Spoilers And Is Universally Suitable For Most Vehicles. The Product Size Is 4.9X2.6 Inches, Please Confirm The Size Before Purchasing To Make Sure It Is More Suitable For Your Vehicle. If You Have Any Questions About Our Products, Please Contact Us Directly! We Will Help You Solve The Problem And Will Always Do Our Best To Meet Your Needs..
【Elegant Surface】: There Are Four Colors For You To Choose, Black, Red Edge Black Cover, Red Cover, Carbon Fiber. Elegant Surface And Exquisite Workmanship Make Your Vehicle Look Beautiful And Stylish. There Are Four Splitters, Matching Screws And Strong Double-Sided Tape In The Package. If You Want Your Car To Have A Sporty Style, You Can Try This Product..
【Easy To Install】: The Diffuser Is Very Simple To Install, Fix The Diverter To The Rear Bumper With Double-Sided Tape, And Then Install Screws To Make It More Stable. In That Way No Matter How Fast You Drive Or How Bad The Road Condition Is, It Won't Fall Off Easily. The Installation Process Won't Take You Much Time. You Can Do It Independently..
【Shark Fin Spoilers】: The Shark Fin Design Uses Aerodynamic Principles To Reduce Wind Effect And Protect Your Car's Rear Bumper From Scratches Or Minor Wear And Damage. This Unique Design Makes Your Car Look More Aesthetically Pleasing, More Racing-Like And Stand Out From Other Vehicles..
Features
- Good Quality : Made of high-quality ABS material, it is durable, waterproof, not easy to deform, there are four colors for you to choose. It is lightweight, scratch-resistant, not easy to rust, and has a long service life. Shark fin style brings a stylish look to your car. It is a product that is both practical and aesthetically pleasing.
- Shark Fin Spoilers : The shark fin design uses aerodynamic principles to reduce wind effect and protect your car's rear bumper from scratches or minor wear and damage. This unique design makes your car look more aesthetically pleasing, more racing-like and stand out from other vehicles.
- Universal Fit : The package contains 4 rear diffuser spoilers and is universally suitable for most vehicles. The product size is 4.9x2.6 inches, please confirm the size before purchasing to make sure it is more suitable for your vehicle. If you have any questions about our products, please contact us directly! We will help you solve the problem and will always do our best to meet your needs.
- Easy to Install : The diffuser is very simple to install, fix the diverter to the rear bumper with double-sided tape, and then install screws to make it more stable. In that way no matter how fast you drive or how bad the road condition is, it won't fall off easily. The installation process won't take you much time. You can do it independently.
- Elegant Surface : There are four colors for you to choose, black, red edge black cover, red cover, carbon fiber. Elegant surface and exquisite workmanship make your vehicle look beautiful and stylish. There are four splitters, matching screws and strong double-sided tape in the package. If you want your car to have a sporty style, you can try this product.
- See more on Amazon...
Brand: AICEL | Manufacturer: AICEL
Dimensions: 0.50 x 1.00 x 1.00 inches
Warranty: 0.2
See On Amazon #10
Front Lip ,HengJia Auto Parts 2.5m/8.2ft Car carbon fiber front lip,Front Bumper Lip ,Carbon Lip ,Side Skirt, front lip spoiler 100% waterproof protection(Carbon black)
Asin: B071S4CK8N | Model: 10 | PartNumber: 10 | Ean: 0736561476366, 0781930566988 | UPC: 736561476366, 781930566988
Made Of Durable And Sturdy Rubber.Smooth And Delicate Cross-Section,Prevent Scratches.Flexible In Use,Easy To Bend,Have Excellent Wear Resistance.Bumper Lip Completely Fit With Your Bumper Design..
Carbon Fiber Front Lip Energy Give Your Car An Aggressive , It Prevents Nasty Collision Scratches And Provides Protection Get An Aggressive And Lowered Look---- Make Your Car Looks More Sporty!（One Month Warranty,Case Of Damage Or Other Reasons,Please E-Mail Contact Us, We Will Respond Within 12 Hours Can Do For You And Arrange. Thank You Very Much For Your Order!）.
Easy To Install: Clean The Installation Location, And Then Apply The Adhesion And Squeeze. The Installation Of The Corner Of The Bumper Needs To Cut Out A Few Triangles To Fit The Original Car. The Product Pictures Have Installation Drawings For Reference. The Car Will Fluctuate During Driving. We Recommend Using Self-Tapping Screws For Reinforcement So As Not To Fall Off. Equipped With Screws To Achieve Better Adhesion And Fixation..
Specification:Long 250Cm*Wide 5.5Cm/98.4 Inch*2.16Inch.Quality 3M Automotive Tape Will Not Be Affected By Wet Or Cold Weather.D.I.Y Car Front Lip Fearturing In Curved Design, Slim, Can Be Stick On Front Or Rear Bumper, Body Kit, Side Skirt,Universal For Most Cars..
Features
- Carbon lip function:To provide an elegant and personalized appearance,Front bumper guard anti-collision protective,protect from scrapes from driveways,speed bumps and curbs.protect cars from collision and alleviate the damage.
- Specification:long 250cm*wide 5.5cm/98.4 inch*2.16inch.Quality 3M automotive tape will not be affected by wet or cold weather.D.I.Y Car Front Lip fearturing in curved design, slim, Can be stick on front or rear bumper, body kit, side skirt,universal for most cars.
- Made of durable and sturdy rubber.smooth and delicate cross-section,prevent scratches.flexible in use,Easy to bend,Have Excellent wear resistance.Bumper Lip completely fit with your bumper design.
- Easy to install: Clean the installation location, and then apply the adhesion and squeeze. The installation of the corner of the bumper needs to cut out a few triangles to fit the original car. The product pictures have installation drawings for reference. The car will fluctuate during driving. We recommend using self-tapping screws for reinforcement so as not to fall off. Equipped with screws to achieve better adhesion and fixation.
- carbon fiber front lip energy Give your car an aggressive , It prevents nasty collision scratches and provides protection Get an aggressive and lowered look---- make your car looks more sporty! One month warranty,case of damage or other reasons,please E-mail contact us, we will respond within 12 hours can do for you and arrange. Thank you very much for your order!
- See more on Amazon...
Brand: HENGJIA | Manufacturer: HengJia Auto Parts
Weight: 1.72 pounds
Warranty: 30 day
See On Amazon #11
GKmow Pack-6 Car Spoiler Canards Kit, Universal Auto Front Bumper Lip Splitter, Body Anti-Collision Diffuser, Exterior Soft Rubber Decorative Stickers (Glossy Black)
Asin: B0C6KHSVMJ | Model: GKZST902BL-6PS | PartNumber: GKZST902BL-6PS
Anti-Scratch Protection: Car Bumpers Are Easily Scratched. This Product Is Designed For Bumpers. It Absorbs Shock And Prevents Scratches, Effectively Protecting The Bumper From Small Impact Damage Or Scratches When Parking Or Stopping. The Overall Rounded Design Is Full And Rounded To Achieve The Protection Of Small Objects While Covering Scratches..
Self-Adhesive: The Bumper Lip Separator Fins Come With Double-Sided Self-Adhesive Tape. First, Clean The Surface Of The Car, Keep It Dry And Clean, Then Peel Off The Adhesive; When It Is Cold, Use A Hot Hair Dryer To Heat The Adhesive Properly, So That It Will Not Fall Off..
Fashion Decoration: The Front Bar Guards Are Available In Classic Carbon Fiber Black Or Glossy Black Appearance. Gives The Car A Sporty And Textured Look With Superb Workmanship And Exquisite Decoration Upgrade The Appearance Of Your Car And Add Your Racing Style..
Pvc Material: Universal Car Spoiler Is Made Of Soft Pvc Material. Exquisite Workmanship, Fine Texture, Durable And Reliable, Perfect For Your Car Curves, Wear-Resistant, Not Deformed, Broken And Aged; At The Same Time, It Can Protect The Body Paint, Prevent The Car From Being Scratched..
Features
- Package Contents: There are 6 universal bumper splitters. 3 sizes are included (5.3In, 4.49In, 8In). Enough for you to modify your beloved car, you can replace and share with your friends, colleagues and others.
- PVC Material: Universal car spoiler is made of soft PVC material. Exquisite workmanship, fine texture, durable and reliable, perfect for your car curves, wear-resistant, not deformed, broken and aged; at the same time, it can protect the body paint, prevent the car from being scratched.
- Anti-scratch Protection: Car bumpers are easily scratched. This product is designed for bumpers. It absorbs shock and prevents scratches, effectively protecting the bumper from small impact damage or scratches when parking or stopping. The overall rounded design is full and rounded to achieve the protection of small objects while covering scratches.
- Fashion Decoration: The front bar guards are available in classic carbon fiber black or glossy black appearance. Gives the car a sporty and textured look with superb workmanship and exquisite decoration Upgrade the appearance of your car and add your racing style.
- Self-adhesive: The bumper lip separator fins come with double-sided self-adhesive tape. First, clean the surface of the car, keep it dry and clean, then peel off the adhesive; when it is cold, use a hot hair dryer to heat the adhesive properly, so that it will not fall off.
- See more on Amazon...
Brand: GKmow | Manufacturer: GKmow
Warranty: Manufacturer warranty for 30 days from date of purchase.
See On Amazon #12
Orion Carbon Fiber Hood 60" x 80" Wrap Film Twill Vinyl Sheet Roll - 3D Carbon Fiber
Asin: B0057WO0YS
Simply Apply This High Quality 3D Carbon Fiber Style Vinyl Sheet To Anything Surface.
Self-Adhesive, Easy Apply. Stretchable With Heat. Water Resistant. Easily Cleansed With Water. Long Lasting..
Each Weave Is About 0.20 Inches And The Sheet Thickness Is About 0.015 Inches. 1 Inch = 25.4 Millimetres.
Unlike Those Cheap Carbon Pattern Printed, There Are True 3D Texture Resembles The Genuine Look Of Dry Carbon Fiber, The Weave Reflects Light The Same Way As The Actual Carbon Fiber Would. Just Use Your Imagination, This Carbon Fiber Style Sheet Will Transform Anything You Want Into A Stylish Carbon Fiber Look Without Spending The Carbon Fiber Price..
Features
- These are by far the most popular 3D Twill-Weave Carbon fiber style vinyl sheet, without the high cost of actual carbon fiber. This unique product is made of UV resistant vinyl that features a carbon textured finish
- Unlike those cheap carbon pattern printed, there are true 3D texture resembles the genuine look of dry carbon fiber, the weave reflects light the same way as the actual carbon fiber would. Just use your imagination, this carbon fiber style sheet will transform anything you want into a stylish carbon fiber look without spending the carbon fiber price.
- Simply apply this high quality 3D carbon fiber style vinyl sheet to anything surface
- Each weave is about 0.20 inches and the sheet thickness is about 0.015 inches. 1 inch = 25.4 millimetres
- Self-adhesive, easy apply. Stretchable with heat. Water resistant. Easily cleansed with water. Long lasting.
- See more on Amazon...
Brand: HK5 | Manufacturer: HK5
See On Amazon #13
3PCS Car Mini Spoiler Wing, 6.7 Inch Universal Auto Car Tail Wing Mini Carbon Fiber Texture Cool Decoration, Car Exterior Accessories for Men Women (Black)
Asin: B0B8BNNPWC | Model: Black | PartNumber: Black | Ean: 0750110188104 | UPC: 750110188104
[How To Use] Easy To Install, Simply Peel And Stick, No Need To Drill Or Any Special Tools. Adhensive Tape In Attached On The Back, You Can Install On Car In Seconds. (Please Clean The Surface Before Installation)..
[100% Satisfaction Guarantee] Buy With Confidence! We Offer One-Year Warranty For Every Order! If You Have Any Reason You Don't Like Our Motorcycle Cover Or Any Questions, Please Feel Free To Let Us Know!.
[Application] Universal Fits For All Car Models In The Market. Ideal To Be Sticked On Front Or Rear Bumper, Body Kit, Side Skirt, Tail Fins, Etc..
[Product Size] Package Includes 3Pcs. Approx. 6.7"*1.4*1.4"/17 X 3.6 X 3.6Cm(L*W*H) Ea..
Features
- [HIGH-QUALITY MATERIAL] Made of upgraded ABS plastic material with carbon fiber texture on the wing surface. The size is more reasonable after upgrading, give your car an unique and cool look.
- [PRODUCT SIZE] Package includes 3pcs. Approx. 6.7*1.4*1.4/17 x 3.6 x 3.6cm(L*W*H) ea.
- [HOW TO USE] Easy to install, simply peel and stick, no need to drill or any special tools. Adhensive tape in attached on the back, you can install on car in seconds. (Please clean the surface before installation).
- [APPLICATION] Universal fits for all car models in the market. Ideal to be sticked on front or rear bumper, body kit, side skirt, tail fins, etc.
- [100% SATISFACTION GUARANTEE] Buy with confidence! We offer one-year warranty for every order! If you have any reason you don't like our motorcycle cover or any questions, please feel free to let us know!
- See more on Amazon...
Brand: BLAU GRUN | Manufacturer: BLAU GRUN
Warranty: 0.3
See On Amazon #14
12 Pcs Universal Car Spoiler Canards Kit Front Bumper Lip Splitter Car Exterior Soft Fins Car Canards for Car Body Auto Anti Collision Strip Decoration Decal Sticker Accessories, Carbon Fibre Black
Asin: B09ZKJWBPD | Model: Tallew-Universal Car -789 | PartNumber: Tallew-Universal Car -789
Enough To Use: There Are 12 Pieces Of Universal Front Splitters, Practical And Well Made, Enough For You To Modify Your Beloved Car, And You Can Replace And Share Them With Your Friends, Colleagues And Others.
Easy To Use: There Is Adhesive On The Back Of Car Anti Collision Sticker, Making It Easy To Install Without The Need For Other Tools; First, Clean The Surface Of The Car, Keep It Dry And Clean, And Then Tear Off The Glue And Paste It On; In Cold Weather, Heat The Adhesive Properly With A Hot Hair Dryer To Make It Firm And Not Fall Off.
3 Sizes: Our Spoilers For Cars Are Available In 3 Sizes, Respectively About 20 X 7 Cm/ 7.9 X 2.8 Inches, 16.5 X 4.8 Cm/ 6.5 X 1.9 Inches, 13.5 X 4 Cm/ 5.3 X 1.6 Inches, Able To Give Your Car Body A Sporty And Beautiful Appearance.
Stylish And Delicate: Front Bumper Protector Is Classic Carbon Fibre Black, Giving The Car A Sense Of Movement And Texture, Making It More Stylish And Cool To Be Praised By Others, As Well As Covering Scratches And Protecting The Front Bumper Well.
Features
- Serviceable Material: made of soft PP material, our car spoiler is processed by exquisite workmanship, fine in texture, serviceable and reliable, well fit your car curves, resistant to wear, deformation, breakage and ageing; Meanwhile, it can protect the car body paint and keep the car from being scratched
- Stylish and Delicate: front bumper protector is classic carbon fibre black, giving the car a sense of movement and texture, making it more stylish and cool to be praised by others, as well as covering scratches and protecting the front bumper well
- Enough to Use: there are 12 pieces of universal front splitters, practical and well made, enough for you to modify your beloved car, and you can replace and share them with your friends, colleagues and others
- 3 Sizes: our spoilers for cars are available in 3 sizes, respectively about 20 x 7 cm/ 7.9 x 2.8 inches, 16.5 x 4.8 cm/ 6.5 x 1.9 inches, 13.5 x 4 cm/ 5.3 x 1.6 inches, able to give your car body a sporty and beautiful appearance
- Easy to Use: there is adhesive on the back of car anti collision sticker, making it easy to install without the need for other tools; First, clean the surface of the car, keep it dry and clean, and then tear off the glue and paste it on; In cold weather, heat the adhesive properly with a hot hair dryer to make it firm and not fall off
- See more on Amazon...
Brand: Tallew | Manufacturer: Tallew
Warranty: Does not apply
See On Amazon #15
Mophorn GT Wing Spoiler 43.3inch Adjustable Universal Lightweight Aluminum Car Rear Spoiler Wing,Racing Spoiler BGW/JDM Drift
Asin: B01N1SYGKB | Model: 43.3Inch | PartNumber: 43.3Inch | Ean: 0631384428175, 0712166607190 | UPC: 712166607190, 631384428175
Sporty And Stylish Look: Our Racing Spoiler Has Fully Adjustable Angels For Customizable Usages, Efficiencies And Appearances, Extra Smooth Lines Give A Cool Racing Look..
Aerodynamic Characteristics: This Universal Rear Spoiler Can Help With The Aerodynamics Of A Car By Lowering Drag, Or Helping On Putting More Downforce On The Car, Maximizing Its Contact With The Ground For Maximum Traction And Grip To Increase Stability..
High Performance: The Gt Wing Spoiler With Single Deck, Can Effectively Reduce The Impact Of Air Resistance When Driving At High Speed, Improve Driving Stability, And Reduce Fuel Consumption. Easy To Install And Well Crafted Design Provide Great Driving Experience In The Same Time..
Lightweight But Sturdy: Our Rear Spoiler Is Constructed Of Universal Gt Type-V Matte Black Lightweight Aluminum For Durable And Extreme Strength, Work With Best Efficience..
Features
- Wide Application: Wing Length(Maximum Distance): 110cm/43.3" ; Distance Between two brackets: 48cm/18.9".
- Lightweight But Sturdy: Our rear spoiler is constructed of Universal GT Type-V Matte Black Lightweight Aluminum for durable and extreme strength, work with best efficience.
- Sporty and Stylish Look: Our racing spoiler has fully adjustable angels for customizable usages, efficiencies and appearances, extra smooth lines give a cool racing look.
- High Performance: The GT wing spoiler with single deck, can effectively reduce the impact of air resistance when driving at high speed, improve driving stability, and reduce fuel consumption. Easy to install and well crafted design provide great driving experience in the same time.
- Aerodynamic Characteristics: This universal rear spoiler can help with the aerodynamics of a car by lowering drag, or helping on putting more downforce on the car, maximizing its contact with the ground for maximum traction and grip to increase stability.
- See more on Amazon...
Brand: Mophorn | Manufacturer: Mophorn
Dimensions: 4.00 x 44.00 x 8.00 inches
Warranty: Returnable
See On Amazon #16
BASENOR Spoiler for Tesla Model Y Rear Spoiler Wing ABS Material OEM Rear Trunk Lip Model Y Accessories Matte Black Custom Fit 2020-2024
Asin: B0CPHW2FGC | Model: Tesla Model Y | PartNumber: Tesla Model Y
Improved Stability: The Model Y Spoiler's Sleek And Stylish Design Not Only Enhances The Vehicle's Appearance But Also Improves Stability At Higher Speeds. It Helps To Minimize Lift, Providing Better Traction And Control, Especially During Cornering And Highway Driving..
Increased Efficiency: By Reducing Drag And Improving Aerodynamics, The Tesla Model Y Spoiler Contributes To Increased Energy Efficiency. It Helps The Vehicle Achieve Better Range Per Charge, Allowing You To Go Farther On A Single Charge And Maximize The Overall Performance Of Your Tesla Model Y..
Easy Installation: The Tesla Model Y Rear Spoiler Is A Breeze To Install. It Comes With Strong Adhesive And Positioning Stickers, Making It Simple To Align And Attach Securely. It Seamlessly Integrates With Your Car's Bodywork For A Polished Look..
Enhanced Aerodynamics: The Tesla Model Y Spoiler Is Designed To Optimize Airflow And Improve The Vehicle's Aerodynamics. It Reduces Drag And Increases Overall Efficiency, Allowing For A Smoother And More Efficient Driving Experience..
Features
- Perfect Fit - BASENOR Car Spoiler is specifically designed for the 2020-2024 Tesla Model Y and is meticulously designed using a 1:1 modeling approach, creating a perfect fit with Tesla.
- Enhanced Aerodynamics: The Tesla Model Y Spoiler is designed to optimize airflow and improve the vehicle's aerodynamics. It reduces drag and increases overall efficiency, allowing for a smoother and more efficient driving experience.
- Improved Stability: The Model Y spoiler's sleek and stylish design not only enhances the vehicle's appearance but also improves stability at higher speeds. It helps to minimize lift, providing better traction and control, especially during cornering and highway driving.
- Easy Installation: The Tesla Model Y Rear Spoiler is a breeze to install. It comes with strong adhesive and positioning stickers, making it simple to align and attach securely. It seamlessly integrates with your car's bodywork for a polished look.
- Increased Efficiency: By reducing drag and improving aerodynamics, the Tesla Model Y Spoiler contributes to increased energy efficiency. It helps the vehicle achieve better range per charge, allowing you to go farther on a single charge and maximize the overall performance of your Tesla Model Y.
- See more on Amazon...
Brand: BASENOR | Manufacturer: BASENOR
Warranty: Lifetime warranty
See On Amazon #17
Front Bumper Spoiler Lip 8.2ft/250cm Length Universal 2.5m Rubber Side Skirt Protector Cover, Car Front Bumper Guard Strip Air Dam Black
Asin: B08LQLDB9H | Model: BRUFR250-bk | PartNumber: BRUFR250-bk
Protect Your Vehicle From Curbs And Scrapes.
Bumper Spoiler Rubber Skirt, Anti-Scratch And Decorative.
Easy To Bend And Conform To The Shape Of The Bumper,Easy Installation And Good Adhesion.
Size: 8.2 Ft (250Cm) Length. Please Refer To The Photo Shown.
Features
- Front lip Universal for most cars, trucks, SUV with easy to use 2.5M automotive tape.
- Size: 8.2 FT (250cm) Length. Please refer to the photo shown
- Protect your vehicle from curbs and scrapes
- Easy to bend and conform to the shape of the bumper,Easy installation and good adhesion
- Bumper spoiler rubber skirt, anti-scratch and decorative
- See more on Amazon...
Brand: STEBER | Manufacturer: STEBER
Dimensions: 0.80 x 2.00 x 1.00 inches
Warranty: No
See On Amazon #18
Acmex Rear Spoiler Wing Fits for 2008-2012 BMW E90 M3 Sedan & 2006-2011 E90 3 Series Sedan Trunk M4 Style 323i 325i 325xi 328i 328i xDrive 330i 330xi 335i 335d 335i xDrive M3 (Carbon Fiber)
Asin: B095K9R9J2 | Model: E90 Spoiler | PartNumber: E90 Spoiler | Ean: 0709930388478 | UPC: 709930388478
★【Carbon Fibre Style】Use Hydrographic Transfer Printing Technology To Get A Carbon Looking, The Material Is Not Real Carbon Fiber But With A Carbon Fiber Style Looking. This Spoiler Can Also Make Your Car More Luxurious..
★【Quick Installation】The Double-Sided Tape Is Already Attached To The Spoiler. Peel Off The Tape On The Back Then Stick The Spoiler On The Lid Of The Trunk. Very Easy And Quick Installation Without Drilling Or Modification..
★【M4 Type Spoiler】Will Dramatically Improve The Sporty M4 Appearance Of Your Car. The New Spoiler Works Fine And Enhances Overall Performance In Handling And Durability, So That The Drag Coefficient Is Correspondingly Reduced, And The Air Resistance Of The Car Is Reduced. Therefore, The Addition Of It Is Also Helpful To Save Fuel..
★【High Quality Material】This Rear Trunk Spoiler Is Made Of Top-Grade Abs Plastic With A Polished Surface And Uv-Protected Clear Coating. Lightweight And Streamlined Design Helps To Reduce Wind Resistance, Promote Motion Appearance, Improve Driving Stability And Safety..
Features
- PREFUCTLY FITMENT This E90 rear spoiler is compatible with 2008-2012 E90 3 Series Sedan 4 DOOR & 2006-2011 E90 M3 Sedan 4 DOOR Include 323i 325i 325xi 328i 328i xDrive 330i 330xi 335i 335d 335i xDrive M3.Check the "amazon confirmed fit" carefully before to ensure proper fit your vehicle.
- HIGH QUALITY MATERIAL This rear trunk spoiler is made of top-grade ABS plastic with a polished surface and UV-Protected clear coating. Lightweight and streamlined design helps to reduce wind resistance, promote motion appearance, improve driving stability and safety.
- CARBON FIBRE STYLE Use hydrographic transfer printing technology to get a carbon looking, the material is not real carbon fiber but with a carbon fiber style looking. This spoiler can also make your car more luxurious.
- M4 TYPE SPOILER Will dramatically improve the sporty M4 appearance of your car. The new spoiler works fine and enhances overall performance in handling and durability, so that the drag coefficient is correspondingly reduced, and the air resistance of the car is reduced. Therefore, the addition of it is also helpful to save fuel.
- QUICK INSTALLATION The double-sided tape is already attached to the spoiler. Peel off the tape on the back then stick the spoiler on the lid of the trunk. Very easy and quick installation without drilling or modification.
- See more on Amazon...
Brand: Acmex | Manufacturer: Acmex
Dimensions: 2.50 x 46.80 x 11.80 inches
Warranty: 30 days
See On Amazon #19
Redodeco Self-Adhesive Reflective Chrome Silver Vinyl Wrap Sticker Decal Film Sheet 12inch by 60inch
Asin: B075WS7X7Q | Model: 6UYSMERRORSRHFRG | PartNumber: 6UYSMERRORSRHFRG | Ean: 0710154610511 | UPC: 710154610511
Easy To Measure: There Is The Measure-And-Cut Grid On The Backing Paper,Which Will He Helpful When You Cut It..
Easy To Apply:Just Peel And Stick! It Can Be Easily Repositioned And Stretched For Precise Assembly And Soft Enough To Fit All Edges/Profiles/Shapes. Creases And Air Bubbles Can Be Removed By Heating And Using A Squeegee..
Multiple Uses:Reflective Peel And Stick Vinyl Can Be Used In Many Ways, Decor, Arts, Crafts, Walls, Back Splashes , Bar Backs, Furniture, Custom Sized Reflective Film Product Where You Shine And Reflectivity..
Features: Water Proof, Uv Protected,Can Be Wiped With Cloth; High Glossy Finished,Using Pvc, Non-Chlorine Bleached.Removable,Won't Damage The Surface Of Your Project..
Features
- Size:12inch by 60inch,premium quality chrome sign vinyl can be used for auto,metals, wood, glass and plastics.
- Features: Water proof, UV protected,can be wiped with cloth; High glossy finished,using PVC, Non-chlorine bleached.removable,won't damage the surface of your project.
- Easy to measure: There is the measure-and-cut grid on the backing paper,which will he helpful when you cut it.
- Multiple uses:Reflective Peel and stick vinyl can be used in many ways, decor, arts, crafts, walls, back splashes , bar backs, furniture, custom sized reflective film product where you shine and reflectivity.
- Easy to apply:just peel and stick! It can be easily repositioned and stretched for precise assembly and soft enough to fit all edges/profiles/shapes. Creases and air bubbles can be removed by heating and using a squeegee.
- See more on Amazon...
Brand: REDODECO | Manufacturer: REDODECO
Dimensions: 2.00 x 2.00 x 2.00 inches
See On Amazon #20
Evargc Glossy Black 69"-73" Adjustable Universal Car Front Bumper Lip Spoiler Diffuser Body Kits + 29" Car Side Skirt Extension Rocker Panel Body Kit+ 14" Car Rear Bumper Lip Compatible Most Vehicle
Asin: B0BJVKDM4B | Model: Does not apply | PartNumber: Does not apply | Ean: 0641320357186 | UPC: 641320357186
【Elegant Appearance】Black Front Bumper Lip Splitter, Elegant And Personalized Appearance Will Beautify The Appearance Of Your Vehicle And Enhance The Visual Effect..
【Easy Installation】Easy To Install And Long-Lasting Use. 9-Hole Screw Positioning Makes Installation Easier And More Reliable. Professional Installation Is Highly Recommended..
【Providing Protect】Front Bumper Guard Anti-Collision Protective. It Can Reduce Wind Resistance, Prevent Your Car From Collisions And Alleviate Damage, And Protect The Original Bumper From Road Bumps And Scratch..
【Premium Abs Material】 Package Included: Front Bumper Lip + 29"/74.5Cm Side Skirt Splitter + 17"/45Cm Rear Lip (With Screws Kit). Protect Your Bumper From Scratching. Include Instructions..
Features
- Universal Front Bumper Lip This front bumper lip splitter is fit for most models with front bumper size around 69 inch-73 inch, Fit For Honda Mitsubishi Toyota Kia Infiniti Sedan Mazda, Subaru, VW, Lexus, Audi, BMW, Benz, Ford, Honda, Toyota,ect.
- Premium ABS material Package Included: Front Bumper Lip + 29/74.5CM Side Skirt Splitter + 17/45CM Rear Lip (with Screws kit). Protect Your Bumper From Scratching. Include instructions.
- Elegant Appearance Black front bumper lip splitter, elegant and personalized appearance will beautify the appearance of your vehicle and enhance the visual effect.
- Providing Protect Front bumper guard anti-collision protective. It can reduce wind resistance, prevent your car from collisions and alleviate damage, and protect the original bumper from road bumps and scratch.
- Easy Installation Easy to install and long-lasting use. 9-hole screw positioning makes installation easier and more reliable. Professional installation is highly recommended.
- See more on Amazon...
Brand: Evargc | Manufacturer: Evargc
Warranty: 1 year
See On Amazon
Looking For Something Else?
Search