Nakkaa 5/8" Drill Bridge Reamer Construction Reamer with 1/2" Shank Chuck HSS Taper Bridge Reamer Bit Tool for Steel Metal Wood Alloy to Align Existing Hole and Enlarge Hole
Asin: B0BCVPZ9Z9 | Ean: 0748998416709 | UPC: 748998416709
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Design - Made Of High-Quality Steel, High Toughness, High Temperature Resistance, Corrosion Resistance, Long Service Life. The Tapered Point Design Permits The Reamer Bit To Enter Into The Overlapping Holes Of Out-Of-Line, Make The Bolt Holes Line Up. Enlarging The Holes In The Steering Knuckles And Pitman Arm..
Application - Commonly Used In Bridge, Construction, Steel Erection And Automotive Truck Trailer Industries, Specially Use In Structural Materials Such As Steel, Metal, Alloy Aluminum, Brass, Plastic, Iron, Nickel, Copper, Cast Iron Etc. Three Symmetrically Placed Flats On Shank Provide Positive Grip In Portable Electric And Pneumatic Tools..
Dimension - The 5/8" Bridge Reamer Bit Is Not A Drill Bit, Only Aligning Reamer To Aligh Holes Which Are Pre-Drilled. If You Need To Expand A Hole To 5/8". At First There Must Be A 3/8" Pre-Drilled Hole,Then Ream Out To 5/8"..
Easy To Use - Makes Reaming Holes Out Extremely Easier Than Using Large Drill Bits, The Reamed Hole Is Smooth Without Tear-Outs. But There Must Be A Existing Hole Or A Pilot Hole That Is Smaller Than 5/8" Before Using Our 5/8" Bridge Reamer Construction Reamer..
Features
- Product - The heavy duty high-speed steel(HSS) bridge reamer is also called construction reamer, it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation. The reamer bit aligns and enlarges pre-drilled holes ready for bolting.
- Easy to Use - Makes reaming holes out extremely easier than using large drill bits, the reamed hole is smooth without tear-outs. But there must be a existing hole or a pilot hole that is smaller than 5/8 before using our 5/8 bridge reamer construction reamer.
- Design - Made of high-quality steel, high toughness, high temperature resistance, corrosion resistance, long service life. The tapered point design permits the reamer bit to enter into the overlapping holes of out-of-line, make the bolt holes line up. Enlarging the holes in the steering knuckles and pitman arm.
- Dimension - The 5/8 bridge reamer bit is not a drill bit, only aligning reamer to aligh holes which are pre-drilled. If you need to expand a hole to 5/8. At first there must be a 3/8 pre-drilled hole,then ream out to 5/8.
- Application - Commonly used in bridge, construction, steel erection and automotive truck trailer industries, specially use in structural materials such as steel, metal, alloy aluminum, brass, plastic, iron, nickel, copper, cast iron etc. Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools.
- See more on Amazon...
Brand: Nakkaa | Manufacturer: Nakkaa
Dimensions: 1.50 x 6.50 x 1.50 inches
See On Amazon Similar To Nakkaa 5 8 Drill Bridge
#1
M2 High Speed Steel Taper Chucking Reamer 4pcs Set, 3/8", 1/2", 5/8", 3/4", M2 HSS Fit 3/8" 1/2" Shank Chuck (1pc (3/8''))
Asin: B0CGZ2ND4F
M2 Hss Material: Compared To Other Commonly Used Low-Level Hss Materials, M2 Material Has Higher Durability.
Application: Commonly Used In Bridge, Construction, Steel Erection/Fabrication, And Automotive (Truck & Trailer) Industries. Up To 3/8"(10Mm) Thick Mild Steel For Impact Driver Or 1" (25Mm) Thick For Magnetic Drill Press. Notice: It Requires Existing Hole Or A Pilot Hole Would Be Needed..
Spiral Flutes & Safety Stop: Left Helix/Right Hand Cut Sheers Chips Away From Operator. Safety Collar Stop To Over Penetration And Operator Loss Of Stability..
Tapered Point: Allow Entry Into Overlapping Holes..
Features
- Sizes: Including 3/8" (fit 3/8'' shank chuck), 1/2", 5/8" and 3/4" (fit 1/2'' shank chuck). Single piece or sets for free choice.
- Tapered point: allow entry into overlapping holes.
- M2 HSS material: Compared to other commonly used low-level HSS materials, M2 material has higher durability
- Spiral Flutes & Safety stop: Left Helix/Right Hand Cut sheers chips away from operator. Safety collar stop to over penetration and operator loss of stability.
- Application: Commonly used in bridge, construction, steel erection/fabrication, and automotive (truck & trailer) industries. Up to 3/8(10mm) thick mild steel for impact driver or 1 (25mm) thick for Magnetic drill press. Notice: it requires existing hole or a pilot hole would be needed.
- See more on Amazon...
Brand: Nakkaa | Manufacturer: Nakkaa
See On Amazon
Looking For Something Else?
Search