Aideepen Handheld oscilloscopes +1200W 20A DC Converter Boost Car Step-up Power Supply Module
Asin: B0BFHKKSTF
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Function】5Mv/Div - 20V/Div High Sensitivity,With Auto/Normal/ Single Trigger Model,Added The Rotary Encoder, Makes Parameter Adjustment Quicker And Easier.You Also Can Conduct Secondary Development , For Example, It Can Be Changed To Millivoltmeter, Data Loggers..
1200W Dc Step-Up Power Supply Module With Input Overcurrent Protection; Short Circuit Protection; Input Reverse Connection Protection; Low Battery Protection..
【Added】We Added A 9V Battery Buckle, You Just Need To Connect The 9V Battery Use It At Outdoor..
【Clearly Display】2.4-Inch Tft Clearly Display The Test Results, And Can Freeze/Save Waveform Display Content At Any Time.(Including Frequency, Period, Duty Ratio Etc.).
Features
- Easy This handheld oscilloscopes is a complete finished product, without welding,easy to operate and carry,very suitable for your electronic project.
- Clearly display 2.4-inch TFT Clearly display the test results, and can freeze/save waveform display content at any time.(including frequency, period, duty ratio etc.)
- Function 5mV/div - 20V/div high Sensitivity,With Auto/Normal/ Single trigger model,added the rotary encoder, makes parameter adjustment quicker and easier.You also can conduct secondary development , for example, it can be changed to Millivoltmeter, data loggers.
- Added We added a 9V battery buckle, you just need to connect the 9V battery use it at outdoor.
- 1200W DC Step-up Power Supply Module with Input overcurrent protection; Short circuit protection; Input reverse connection protection; Low battery protection.
- See more on Amazon...
Brand: Aideepen
See On Amazon Similar To Aideepen Handheld oscilloscopes 1200W 20A
#1
FNIRSI 2C23T 3 in 1 Handheld Oscilloscope Multimeter DDS Generator, 2 Channels, 10MHz Bandwidth, 50MSa/s Sampling Rate, 10000 Counts, Voltage, Current, Capacitor, Resistor, Diode Test
Asin: B0CMT5WMFY | Model: 2C23T | PartNumber: 2C23T
【Signal Generator】The Maximum Waveform Output Frequency Can Reach 2Mhz And A Step Of 1Hz, And Can Output Seven Waveforms Including Sine, Square, Triangle, Full, Half, Noise, And Dc..
【Save Function】One-Click Save, Screening Function. You Can Upload The Saved Image By Connecting To Pc Via Type-C. You Can Easily Compare The Waveforms By Displaying The Reference Waveform And The Measured Waveform On The Same Screen..
【Excellent Design】The Oscilloscope Adopts Fpga+Mcu+Adc Hardware Architecture, Built-In High-Voltage Protection Module, Adopts 2.8-Inch 320*240 Resolution Hd Lcd Display, Built-In 3000Mah Rechargeable Li-Ion Battery, Standby Time Up To 6H, Type-C Interface Supports 5V/1A Power Adapter Charging..
【Multimeter Mode】4-Digit 10000 Counts. Ac Voltage: 0-750V, Dc Voltage: 0-999.9V, Dc/Ac Current: 0-9.999A, Resistance: 0-99.99Mω, Capacitance: 0-99.99Mf, Temperature: -55°C-1300°C/-67~2372℉, Diode, Continuity Measurement. An Ideal Multi-Function Meter For Professionals, Factories, Schools, Hobbyists Or Home Use..
Features
- Oscilloscope Mode 2 channel handheld oscilloscope, 10MHz bandwidth, real-time sampling rate 50MSa/s, record depth 32kb, maximum measurement voltage 400V, automatic measurement function, trigger function auto/normal/single, 200mv/div-10v/div vertical sensitivity, support waveform image storage and export.
- Multimeter Mode 4-digit 10000 Counts. AC Voltage: 0-750V, DC Voltage: 0-999.9V, DC/AC Current: 0-9.999A, Resistance: 0-99.99M , Capacitance: 0-99.99mF, Temperature: -55 C-1300 C/-67~2372 , Diode, Continuity Measurement. An ideal multi-function meter for professionals, factories, schools, hobbyists or home use.
- Signal Generator The maximum waveform output frequency can reach 2MHz and a step of 1Hz, and can output seven waveforms including sine, square, triangle, full, half, noise, and DC.
- Excellent Design The Oscilloscope adopts FPGA+MCU+ADC hardware architecture, built-in high-voltage protection module, adopts 2.8-inch 320*240 resolution HD LCD display, built-in 3000mAh rechargeable Li-ion battery, standby time up to 6H, Type-C interface supports 5V/1A power adapter charging.
- Save function one-click save, screening function. You can upload the saved image by connecting to PC via Type-C. You can easily compare the waveforms by displaying the reference waveform and the measured waveform on the same screen.
- See more on Amazon...
Brand: FNIRSI | Manufacturer: FNIRSI
Dimensions: 1.40 x 6.60 x 3.40 inches | Weight: 0.65 Pounds
See On Amazon #2
FNIRSI 1013D Plus Oscilloscope - Portable Handheld Tablet Oscilloscope with 100X High Voltage Probe, 2 Channels 100Mhz Bandwidth 1GSa/s Sampling Rate 7" TFT LCD Touch Screen
Asin: B0BHHYMVKV
Easy To Operate: Equipped With Efficient One-Button Automatic Device. One-Click Waveform Saving And Screenshots. The Built-In 1Gb Storage Space Can Store Up To 1000 Screenshots 1000 Sets Of Waveform Data.Powerful Waveform Picture Manager Supports Thumbnail Browsing, Viewing, Detailed Viewing, Page Turning, Deletion And Waveform Zooming In, Zooming Out, Moving, Etc.
Lissajous Graphic Display & Fft Viewing: Lissajous Graphic Display Function Can Be Used To Compare The Amplitude, Frequency And Phase Of The Two Sets Of Signals. Fft Viewing Function Can Roughly Estimation Of The Harmonic Content Of The Signal..
Easily Measuring : Capacitive Screen Touch & Gesture Operation, Cursor Measurement Function, When Manually Reading Amplitude-Frequency Parameters, You Do Not Need To Read The Background Scale Unit And Quantity, And You Can Directly Get The Peak-To-Peak Value And Frequency Without Conversion..
Highly Performance: 7 Inches, 800 * 480 Resolution, Bright Colors And High Contrast. Ultra-Thin And Easy To Carry. Built-In High-Voltage Protection Module,Can Tolerate A Continuous Voltage Of Up To 400V. 6000Mah High-Performance Lithium Battery, Can Be Used Continuously For 4 Hours After Fully Charged..
Features
- Professional Designed: FNIRSI oscilloscope has a real-time sampling rate of up to 1GSA/S and an analog bandwidth of 100MHZ * 2. Fnirsi oscilloscope has a complete trigger function (single/normal/automatic), it can be used freely for both periodic analog signals and aperiodic digital signals.
- Highly Performance: 7 inches, 800 * 480 resolution, bright colors and high contrast. Ultra-thin and easy to carry. Built-in high-voltage protection module,can tolerate a continuous voltage of up to 400V. 6000mAh high-performance lithium battery, can be used continuously for 4 hours after fully charged.
- Easy to Operate: Equipped with efficient one-button automatic device. One-click waveform saving and screenshots. The built-in 1GB storage space can store up to 1000 screenshots 1000 sets of waveform data.Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc
- Easily Measuring : Capacitive screen touch & gesture operation, cursor measurement function, when manually reading amplitude-frequency parameters, you do not need to read the background scale unit and quantity, and you can directly get the peak-to-peak value and frequency without conversion.
- Lissajous Graphic Display & FFT Viewing: Lissajous graphic display function can be used to compare the amplitude, frequency and phase of the two sets of signals. FFT viewing function can roughly estimation of the harmonic content of the signal.
- See more on Amazon...
Brand: FNIRSI | Manufacturer: FNIRSI
See On Amazon #3
Siglent Technologies SDS1202X-E 200 mhz Digital Oscilloscope 2 Channels, Grey
Asin: B06XZML6RD | Model: SDS1202X-E | PartNumber: SDS1202X-E | Ean: 0764560083070, 0695087809419, 0784672492652 | UPC: 784672492652, 695087809419, 764560083070
Irecord Length Up To 14 Mpts.
Standard Serial Bus Triggering And Decode, Supports Iic, Spi, Uart, Rs232, Can, And Lin.
Real-Time Sampling Rate Up To 1 Gsa/Use.
Features
- Country of origin : China
- Real-time sampling rate up to 1 gsa/use
- IRecord length up to 14 Mpts
- Standard serial bus triggering and decode, supports iic, spi, uart, Rs232, can, and lin
- See more on Amazon...
First Available: 04/19/2017
Brand: Siglent | Manufacturer: Siglent Technologies
Dimensions: 17.00 x 10.00 x 15.00 inches | Weight: 5.51 pounds
See On Amazon #4
Handheld Digital Oscilloscope Kit - AUKUYEE 2.4"TFT Mini Portable Oscilloscope, with Power Supply and BNC-Clip Cable Probe Q15001
Asin: B07QML4LJL | Model: no | PartNumber: no | Ean: 8414743678495
Rotary Encoder - It Has Been Added The Rotary Encoder, Makes Parameter Adjustment Quicker And Easier..
What You Get - You Will Get An Assembled Oscilloscope, Bnc-Clip Cable And A Power Pupply. Detailed Operation Instructions Troubleshooting Guide And Schematic Are Also Provided..
Assembled Finished - Q15001 Oscilloscope Is An Assembled Finished Machine. Not Diy Part, It Can Be Used Directly To Avoid Assembling Welding Process Problems And Greatly Saves The Assembly Time..
Designing To Your Needs - Display And Mcu Are Mounted On The Same Board (Mainboard) To Avoid Using Inter-Board Pin-Headers. Analog Channel Is Placed On A Separate Board That Contains Most User Install Parts, So The Analog And Digital Circuits Can Be Better Separated..
Features
- UPGRADED VERSION - Please Calibrate the Oscilloscope Before Use! The sensitivity of Q15001 has been extended in both directions and is higher and wider. It reaches 5mV/div - 20V/div. Also, this updated version can be handheld.
- DESIGNING TO YOUR NEEDS - Display and MCU are mounted on the same board (mainboard) to avoid using inter-board pin-headers. Analog channel is placed on a separate board that contains most user install parts, so the analog and digital circuits can be better separated.
- ROTARY ENCODER - It has been added the rotary encoder, makes parameter adjustment quicker and easier.
- ASSEMBLED FINISHED - Q15001 oscilloscope is an Assembled finished Machine. NOT DIY PART, it can be used directly to avoid assembling welding process problems and greatly saves the assembly time.
- WHAT YOU GET - You will get an assembled oscilloscope, BNC-clip cable and a power pupply. Detailed Operation instructions troubleshooting guide and schematic are also provided.
- See more on Amazon...
Brand: AUKUYEE | Manufacturer: AUKUYEE
See On Amazon #5
FNIRSI 1014D Oscilloscope 2 in 1 Digital Oscilloscope DDS Signal Generator, 100X High Voltage Probe, 2 Channels 100Mhz Bandwidth 1GSa/s Sampling Rate Built-in 1GB Storage Space
Asin: B097T5NRTZ | Model: 1014D | PartNumber: 1014D | Ean: 0616833936357 | UPC: 616833936357
Easily Measuring : Cursor Measurement Function, When Manually Reading Amplitude-Frequency Parameters, You Do Not Need To Read The Background Scale Unit And Quantity, And You Can Directly Get The Peak-To-Peak Value And Frequency Without Conversion..
Lissajous Graphic Display & Fft Viewing: Lissajous Graphic Display Function Can Be Used To Compare The Amplitude, Frequency And Phase Of The Two Sets Of Signals. Fft Viewing Function Can Roughly Estimation Of The Harmonic Content Of The Signal..
Easy To Observe : Equipped With High-Efficiency One-Button Auto, Adaptive 25%, 50%, 75% Trigger, Can Display The Measured Waveform Without Cumbersome Adjustment; The Display Is Equipped With A 7-Inch 800*480 Resolution High-Definition Lcd Screen..
Function Signal Generator : Built-In Dds Function Signal Generator And Industry's Original Chopping Output (@2.5Vpp), All Signal Frequency Steps Are 1Hz, Support 14 Kinds Of Standard Function Signals And A Customizable Chopping Signal, Chopping The Output Divice Intercepts Part Or The Whole Part Of The Complex Signals Measured By The Oscilloscope As The Output Signal Of The Signal Generator, Which Can Store Up To 1000 Customized Chopping Signals..
Features
- Professional Designed : Fnirsi oscilloscope has a real-time sampling rate of up to 1GSA/S and an analog bandwidth of 100MHZ * 2. Fnirsi oscilloscope has a complete trigger function (single/normal/automatic), it can be used freely for both periodic analog signals and aperiodic digital signals.
- Function Signal Generator : Built-in DDS function signal generator and industry's original chopping output (@2.5VPP), all signal frequency steps are 1HZ, support 14 kinds of standard function signals and a customizable chopping signal, chopping the output divice intercepts part or the whole part of the complex signals measured by the oscilloscope as the output signal of the signal generator, which can store up to 1000 customized chopping signals.
- Easily Measuring : Cursor measurement function, when manually reading amplitude-frequency parameters, you do not need to read the background scale unit and quantity, and you can directly get the peak-to-peak value and frequency without conversion.
- Easy to Observe : Equipped with high-efficiency one-button AUTO, adaptive 25%, 50%, 75% trigger, can display the measured waveform without cumbersome adjustment; the display is equipped with a 7-inch 800*480 resolution high-definition LCD screen.
- Lissajous Graphic Display & FFT Viewing: Lissajous graphic display function can be used to compare the amplitude, frequency and phase of the two sets of signals. FFT viewing function can roughly estimation of the harmonic content of the signal.
- See more on Amazon...
Brand: FNIRSI | Manufacturer: FNIRSI
Dimensions: 5.51 x 9.84 x 2.76 inches | Weight: 3.46 Pounds
Warranty: 60 day manufacturer
See On Amazon #6
Upgraded Model with 10X Prode] FNIRSI Digital Oscilloscope DSO152, Handheld Portable Automotive Oscilloscope with 2.8 inch TFT, 2.5MS/s High Sampling Rate, 200KHz Bandwidth
Asin: B0CXSL33JW
🔹🔹【Large Capacity Battery】The Fnirsi Oscilloscope Is Equipped With Built-In 1000Mah Battery. It Could Continually Work For 4 Hours After Fully Charged. You Could Use It Indoor Or Outdoor Without Worrying About There Is No Charging Socket. .
🔹🔹【Quick Measurement】With One-Key Auto Setting Of All Parameters, It Can Quick Measure Waveform. Your Working Efficiency Would Be Highly Improved. Only Need To Long Press The Auto Button, The Baseline Would Be Quickly Calibrated..
🔹🔹【Portable&Lightweight】The Size Of This Oscilloscope Is 99X68.3X19.5Mm, Which Makes It Lightweight And Easy To Carry. No Assembling Process Is Needed Because It Is Assembled Completely. .
🔹🔹【User-Friendly Oscilloscope】Fnirsi Ds0152 Oscilloscope Is Equipped With 2.8Inch High Definition Lcd Display Screen, Which Is Easy For Users To View The Data. There Are Also 3 Different Trigger Modes(Auto/Normal/Single) For Users To Select. The Type C Interface Supports Both Data Transmission And Charging. .
Features
- mini oscilloscope with great performance FNIRSI DSO152 mini oscilloscope is small but with strong performance--the real-time sampling rate is up to 2.5MS/s and the bandwidth is up to 200KHz. There is a 10X probe comes with the box that could measure 800VPP(280V AC).Volatges range 400V could be measured.
- User-friendly Oscilloscope FNIRSI DS0152 oscilloscope is equipped with 2.8inch high definition LCD display screen, which is easy for users to view the data. There are also 3 different trigger modes(AUTO/NORMAL/SINGLE) for users to select. The type C interface supports both data transmission and charging.
- Large capacity battery The FNIRSI Oscilloscope is equipped with built-in 1000mAH battery. It could continually work for 4 hours after fully charged. You could use it indoor or outdoor without worrying about there is no charging socket.
- Portable&lightweight The size of this oscilloscope is 99x68.3x19.5mm, which makes it lightweight and easy to carry. No assembling process is needed because it is assembled completely.
- Quick Measurement With one-key AUTO setting of all parameters, it can quick measure waveform. Your working efficiency would be highly improved. Only need to long press the AUTO button, the baseline would be quickly calibrated.
- See more on Amazon...
Brand: WESTOBiG | Manufacturer: FNIRSI
See On Amazon #7
2 in 1 Handheld Oscilloscope Multimeter Professional Oscilloscope Multimeter with 2.5 Msps High Sampling Automatic Waveform Capture Function DC AC Voltagem Current Test
Asin: B08832JX4H | Model: LM2020 | PartNumber: LM2020 | Ean: 0768477385357 | UPC: 768477385357
More Accuracy -Dedicated Chip, The Automatic Waveform Capture Function, Easy Operation. The Software Calibration Technology, Memory Calibration Coefficients. Measure More Accurately. To Enable Quiet Mode (Disable Keypress Beeps), Press And Hold The "F4" Button And Then Rotate The Rotary Knob To Turn On The Instrument..
Overload Protection & Multi-Purpose - Built-In 500Ma/10A Double Protective Tube, Dual Protection Of The Instrument. Can Choose To Automatically Shutdown Or Continuous Operation, Applicable To The Workplace Such As Family, School, And Factory. Distortion Detection Also Protect Safety..
Led Backlight & Storage / Readout - Analog Broadband Range Up To: D Ac ~ 1Mhz, Display Hold, Storage / Readout Up To 10 Waveforms And 100 Sets Of Measurement Values. 240X320 Color Screen With Led Backlighting. More Clear And Suitable For Working At Night..
More Powerful Detection Range -Dc Voltage 0 ~ 1000V, Ac Voltage 0 ~ 750V, Dc/Ac Current 0 ~ 10A, Resistance 0 ~ 40Mω, Capacitance 0 ~ 100Μf, Frequency 0 ~ 5Mhz, Diode / Continuity Open Circuit Voltage 1.5V, Judgement Resistance 50Ω. Transistor Amplification Test To Meet All Test Requirements..
Features
- FASTER SAMPLING SPEED - 2.5Msps high-speed A/D data collecting, high sampling rate and high bandwidth, one-key transform to waveform function furing measuring.3 waveform scanning modes: automatic/conventional/single. Improve work efficiency. You will receive ET828 or LM2020, they are same product, have same function, LM2020 is our updated name.
- MORE POWERFUL DETECTION RANGE -DC voltage 0 ~ 1000V, AC voltage 0 ~ 750V, DC/AC Current 0 ~ 10A, Resistance 0 ~ 40M , Capacitance 0 ~ 100 f, Frequency 0 ~ 5MHZ, Diode / Continuity open circuit voltage 1.5V, judgement resistance 50 . Transistor amplification test to meet all test requirements.
- MORE ACCURACY -Dedicated Chip, the automatic waveform capture function, easy operation. The software calibration technology, memory calibration coefficients. Measure more accurately. To enable Quiet Mode (disable keypress beeps), press and hold the F4 button and then rotate the rotary knob to turn on the instrument.
- LED BACKLIGHT & STORAGE / READOUT - Analog broadband range up to: D AC ~ 1MHz, Display hold, storage / readout up to 10 waveforms and 100 sets of measurement values. 240X320 color screen with LED backlighting. More clear and suitable for working at night.
- OVERLOAD PROTECTION & MULTI-PURPOSE - Built-in 500mA/10A double protective tube, dual protection of the instrument. Can choose to automatically shutdown or continuous operation, applicable to the workplace such as family, school, and factory. DISTORTION DETECTION ALSO Protect safety.
- See more on Amazon...
Brand: LIUMY | Manufacturer: LIUMYARTISTOREGO
Weight: 0.40 pounds
See On Amazon #8
Mini Handheld Digital Oscilloscope, Support Persistence, PWM, 14 Type Measurement, 40MSa/s Sampling Rate, 18MHz Bandwidth, Signal Generator Frequency 500Khz, 2.4 LCD Display
Asin: B0BXC6XZVS
There Are 14 Measurement Options Available: Frequency, P-Eak To P-Eak, Duty Cycle, Amplitude, Rms, Average, Period, +Pulse Width, -Pulse Width, Max, Min,Top, Base..
Wide Applications: Ideal For The Maintenance Industry And The R&D Education Industry. It's Very Valuable For Find Ac Bleeds In Signaling Wires, Examin Clock Signals, Pwm, Checked For Noise, And Used It To Debug Spi. And For A Hobbyist, Learn-To-Fix Electronic Stuffs Like Phones, Laptops, Switching Ps And Such, It Is A Good Choice..
🎁What You Will Get: 1 *Digital Oscilloscope , 1 * High Voltage Probe , 1 * Typc-C Cable , 1* Alligator Clips , 1* Manual, And Leolov Provides A Lifetime Service And Technical Support. Please Feel Free To Contaut Us, You Will Get A Reply In 24 Hours..
Built-In High Voltage Protection: The Handheld Oscilloscope Built-In High Voltage Protection Module Can Withstand Up To ±400V Ac/Dc Voltage Signal. And Built-In 1000M-Ah High-Quality Battery, Can Be Used Continuously For About 6 Hours After Full Charge..
2 Trigger Modes & One-Key Auto: The Diy Oscilloscope Kit Configured 2 Trigger Modes, Auto/Normal. Support Waveform Parameter Setting,Such As Time Base, Amplitude, Etc. And Support Waveform One-Key Auto To Automatically Adapt To The Screen, No Need To Adjust Parameters,Convenient And Accurate Measurement..
Features
- Faster Sampling Speed: Compared to the previous 138pro mini oscilloscope, this upgraded 154pro mini oscilloscope has a real-time sampling rate of 40MSa/s, a bandwidth of 18MHz, 500Khz signal generator frequency. Improve your work efficiency.
- 2 Trigger Modes & One-key AUTO: The DIY oscilloscope kit configured 2 trigger modes, auto/normal. Support waveform parameter setting,such as time base, amplitude, etc. And Support waveform one-key AUTO to automatically adapt to the screen, no need to adjust parameters,convenient and accurate measurement.
- There are 14 measurement options available: Frequency, P-eak to P-eak, Duty cycle, Amplitude, RMS, Average, Period, +Pulse width, -Pulse width, Max, Min,Top, Base.
- Built-in High Voltage Protection: The handheld oscilloscope built-in high voltage protection module can withstand up to 400V AC/DC voltage signal. And built-in 1000m-Ah high-quality battery, can be used continuously for about 6 hours after full charge.
- Wide Applications: Ideal for the maintenance industry and the R&D education industry. It's very valuable for find AC bleeds in signaling wires, examin clock signals, PWM, checked for noise, and used it to debug SPI. And for a hobbyist, learn-to-fix electronic stuffs like phones, laptops, switching PS and such, it is a good choice.
- What You Will Get: 1 *Digital Oscilloscope , 1 * High Voltage Probe , 1 * Typc-C cable , 1* alligator clips , 1* Manual, and Leolov provides a lifetime service and technical support. Please feel free to contaut us, you will get a reply in 24 hours.
- See more on Amazon...
Brand: Leolov | Manufacturer: Leolov
See On Amazon #9
HANMATEK 110mhz Bandwidth DOS1102 Digital Oscilloscope with 2 Channels and Screen 7 inch / 18 cm, TFT-LCD Display, Portable Professional Oscilloscope Kit with 500 MS/s *2 Sampling Rate
Asin: B0833YFNKP | Model: DOS1102 | PartNumber: DOS1102 | Ean: 0799670938163 | UPC: 799670938163
★ 3: It Has Automatic Range Function And Supports Horizontal, Vertical, Single Waveform/Multiple Waveform Tracking; There Are Four Probe Attenuation Multiples: 1X, 10X, 100X, And 1000X;.
★ 5: It Has 30 Automatic Measurement Functions And Can Customize The Measurement Menu; It Has A Waveform Capture Function, Supports Labview Communication, Supports Secondary Development, And Complies With Scpi Specifications; Powered By Dc..
★ 4: Built-In 6-Digit Hardware Frequency Meter, Capable Of Measuring 2 Hz ~ 20 Mhz; With Current Measurement Function, Measurement Range: 100.0 Ma/V ~ 1 Ka/V; With U Disk Storage Function; Usb Device And Host Interface; Host Software Download Address: Tinyurl Dot Com/2Peldgne;.
★ 2: 7-Inch Tft Lcd Screen (True Color), 65535 Colors, Resolution 800×480 Pixels; Supports Cursor Measurement, The Cursor Mode Is No Less Than Voltage Difference (△V), Time Difference (△T), Time Difference And Voltage Difference (△ V) Four Modes Of Automatic Cursor;.
Features
- 1: 110 MHz bandwidth, 500 MS/s *2 real-time sampling rate, dual channels, 2 ns / Div ~ 1000s / Div time base range; 20 mV/div ~ 5 V/div vertical scale, storage depth (each acquisition The recording length of the waveform) is not less than 10K sampling points; it can store not less than 16 groups of waveforms, and has U disk storage function, USB device and host interface;
- 2: 7-inch TFT LCD screen (true color), 65535 colors, resolution 800 480 pixels; supports cursor measurement, the cursor mode is no less than voltage difference ( V), time difference ( T), time difference and voltage difference ( V) Four modes of automatic cursor;
- 3: It has automatic range function and supports horizontal, vertical, single waveform/multiple waveform tracking; there are four probe attenuation multiples: 1X, 10X, 100X, and 1000X;
- 4: Built-in 6-digit hardware frequency meter, capable of measuring 2 Hz ~ 20 MHz; with current measurement function, measurement range: 100.0 mA/V ~ 1 kA/V; with U disk storage function; USB device and host interface; host software download Address: tinyurl dot com/2peldgne;
- 5: It has 30 automatic measurement functions and can customize the measurement menu; it has a waveform capture function, supports LABVIEW communication, supports secondary development, and complies with SCPI specifications; powered by DC.
- See more on Amazon...
Brand: HANMATEK | Manufacturer: HANMATEK
Dimensions: 2.76 x 11.85 x 5.98 inches | Weight: 2.43 Pounds
See On Amazon
Looking For Something Else?
Search