EIBOS Official 3D Printer Filament Dryer with Fan Cyclopes, Filament Dry Box 2 Spools with PTC Heating, Adjustable Temp, Humidity Sensor, Compatible with PLA, Nylon, PETG, ABS, TPU
Asin: B0BFQXHRV5 | Model: CYCLOPES | PartNumber: CYCLOPES
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Multiple Exit Holes & Compatible With Multiple Spools】Cyclopes Works For A Wide Range Of Filament Types And Diameters, Compatible With 1.75Mm, 2.85Mm, 3.00Mm 3D Filament Such As Nylon, Pla, Petg, Abs, Silk, Carbon Fiber, Wood, Etc. Teflon Tube Included, 10 Exits Holes Are Available For You To Choose From. Extra Large Space Allows Usage 4 Rolls Of 0.5Kg Filaments, 2 Rolls Of 1Kg Filaments, 1 Roll Of Large Filament At The Same Time, It Has Two Built-In Rotating Shafts That Allow The Filament To Continuously Rotate In A Dry Hot Box To Remove Moisture (Note: For Single Large Spool-217X174mm, Dual Small Spools: 217X80mm(H*W).
【Restore Your Brittle Filament】Keep Your Old Left Out Brittle Filament Before Having Our Filament Dryer, Cyclopes Will Help Drying And Restoring The Spools, Even Make Them Better Than The Brand New Unit, Impeccable Prints Are The Result. No Adhesion, Cloggings, Bubbles, Or Any Plastic Strings. Easy To Use, No Need Extra Set Up.
【Low Noise & Customer Service】Eibos Cyclopes Has Upgraded Its Pcb Board With The Newest Relay For Better Performance, Aimed At Minimizing Any Noise While The Dryer Operating, No Clicks On And Off Sound At All, The Batch From Nov 2023 Applies. Besides, 1-Year After-Sales Guarantee Offered For Your Peace Of Mind❤️🔥.
【Built-In Fan & 100W Ptc Heater】 A Built-In Fan Is Designed To Circulate The Hot Air Inside The Filament Dryer Box To Make Drying System Better Remove The Moisture, Different From Applying Normal Heater 48W Pi Heating Pad To Heat Up Space, Our Product Use 100W Ptc Heater Which Is More Durable, Energy-Saver, And Environmentally Friendly, Makes Filament Drying More Evenly.
【Real-Time Humidity Monitor & Adjustable Temperature】 A Dramatic Drop In The Humidity Level Clearly Indicated By The Real-Time Humidity Monitor, (Note: The Dryer Came With A A76/Lr44 Button Battery, Just Switch The On/Off Button On The Back Of Hygrometer Before Using), Measurement Range From 10%-99%. Heating Temperature Can Be Adjusted To Meet Needs Of Various Filaments, The Setting Temp Will Be Displayed By The Lcd Panel. The Default Time Is 6Hrs, You Can Also Reset From 0-24Hrs Up To 70℃ Or Even Infinite Heating Time Regarding Your Needs.
Features
- FILAMENT DRYER & STORAGE BOX the filament dryer Cyclopes is specifically made for the purpose of drying 3D printer filament, aimed at removing the moisture that filament absorb from ambient exposing. Drying while printing, the dryer function as both storage box and filament holder (Note: you need MANUALLY ROTATE the rolls for drying when NOT ACTIVELY printing to avoid the direct hot-air from the bottom). US Plug, input voltage 110V-120V
- REAL-TIME HUMIDITY MONITOR & ADJUSTABLE TEMPERATURE a dramatic drop in the humidity level clearly indicated by the real-time humidity monitor, (NOTE: the dryer came with a A76/LR44 button battery, just switch the ON/OFF button on the back of hygrometer before using), measurement range from 10%-99%. Heating temperature can be adjusted to meet needs of various filaments, the setting temp will be displayed by the LCD panel. The default time is 6hrs, you can also reset from 0-24hrs up to 70 or even infinite heating time regarding your needs
- MULTIPLE EXIT HOLES & COMPATIBLE WITH MULTIPLE SPOOLS Cyclopes works for a wide range of filament types and diameters, compatible with 1.75mm, 2.85mm, 3.00mm 3D filament such as Nylon, PLA, PETG, ABS, Silk, Carbon fiber, Wood, etc. Teflon tube included, 10 exits holes are available for you to choose from. Extra large space allows usage 4 rolls of 0.5kg filaments, 2 rolls of 1kg filaments, 1 roll of large filament at the same time, it has two built-in rotating shafts that allow the filament to continuously rotate in a dry hot box to remove moisture (Note: for Single Large Spool-217x174mm, Dual Small Spools: 217x80mm(H*W)
- BUILT-IN FAN & 100W PTC HEATER a built-in fan is designed to circulate the hot air inside the filament dryer box to make drying system better remove the moisture, different from applying normal heater 48W PI heating pad to heat up space, our product use 100W PTC heater which is more durable, energy-saver, and environmentally friendly, makes filament drying more evenly
- RESTORE YOUR BRITTLE FILAMENT keep your old left out brittle filament before having our filament dryer, Cyclopes will help drying and restoring the spools, even make them better than the brand new unit, impeccable prints are the result. No adhesion, cloggings, bubbles, or any plastic strings. Easy to use, no need extra set up
- LOW NOISE & CUSTOMER SERVICE eibos cyclopes has upgraded its PCB board with the newest relay for better performance, aimed at minimizing any noise while the dryer operating, NO clicks on and off sound at all, the batch from Nov 2023 applies. Besides, 1-Year After-Sales Guarantee offered for your peace of mind
- See more on Amazon...
Brand: EIBOS | Manufacturer: Shenzhen EIBOS Chuanggou Tech Co., Ltd
Dimensions: 11.80 x 7.90 x 10.20 inches | Weight: 3.59 pounds
Warranty: 1 year manufacturer
See On Amazon Similar To EIBOS Official 3D Printer
#1
[Upgraded with Fan] 2024 SUNLU Official Filament Dryer Box S2 for 3D Printer Filament, Upgrade Filament Storage Dehydrator for PLA PETG ABS Nylon PA Filament 1.75 2.85 3.00mm
Asin: B0BM97WX1D | Model: S2 | PartNumber: S2 | Ean: 0783970261342 | UPC: 783970261342
✅【Easy To Use & Quality Guaranteed】 Allows You To Print While Drying. 2 Inch Large Lcd Screen Monitor,Able To Display Temperature&Time Clearly And Brightly. Decrease Noise When Printing (Less Than 10Db While Operating)..
✅【Drying & Printing At One Time】The Feed-Out Coil Also Allows The Filament To Continue To Dry In The Dryer As It's Being Fed To The Printer. This Means That The Filament Will Be Dry And Ready To Use When It Reaches The Printer..
✅【Wide Compatibility Range】Compatible With A Wide Range Of Filament Brands And Diameters. It Can Work With All Mainstream 3D Filament Brands And All Standard Filament Diameters Of 1.75Mm/2.85Mm/3.00Mm. This Means That It Can Be Used With A Variety Of Filaments, Including Pla, Pla+, Petg, Tpu, Abs, And Even High-End Filaments Like Pa And Pc. This Makes It A Versatile And Convenient Option For Users Who Want To Dry Their Filament..
✅【Touch Screen & Easy Operation】3D Filament Dry Box S2 Has A New Touch Screen That Is Designed To Provide A Tablet-Like Operation Experience For The User. The Screen Is 3.42*2.87 Inches In Size, Which Makes It Easy To Navigate And Use. The Touch Screen Also Allows User To Easily Switch Between ℃ And ℉ And Offers One-Key Recommended Temperature Settings For Different Types Of Filament. This Makes It Easy For The User To Set The Appropriate Drying Temperature For Their Filament..
Features
- Keep Filaments Strong & Flexible By Using SUNLU Filament Dryer Box S2 to removing moisture from the filament before it's used in the 3D printer, S2 filament dryer helps to ensure that the filament will be dryed. which will result in better print quality and fewer failed prints. This is important in save time, money, and frustration by improving the reliability and consistency of their 3D printing process.
- Touch Screen & Easy Operation 3D filament dry box S2 has a new touch screen that is designed to provide a tablet-like operation experience for the user. The screen is 3.42*2.87 inches in size, which makes it easy to navigate and use. The touch screen also allows user to easily switch between and and offers one-key recommended temperature settings for different types of filament. This makes it easy for the user to set the appropriate drying temperature for their filament.
- Easy to Use & Quality Guaranteed Allows you to print while drying. 2 inch large LCD screen monitor,Able to display temperature&time clearly and brightly. Decrease Noise when Printing (less than 10db while operating).
- Wide Compatibility Range compatible with a wide range of filament brands and diameters. It can work with all mainstream 3D filament brands and all standard filament diameters of 1.75mm/2.85mm/3.00mm. This means that it can be used with a variety of filaments, including PLA, PLA+, PETG, TPU, ABS, and even high-end filaments like PA and PC. This makes it a versatile and convenient option for users who want to dry their filament.
- Drying & Printing at One Time The feed-out coil also allows the filament to continue to dry in the dryer as it's being fed to the printer. This means that the filament will be dry and ready to use when it reaches the printer.
- See more on Amazon...
Brand: UNIDO | Manufacturer: SUNLU INC.,
Warranty: 2 year manufature
See On Amazon #2
EIBOS Official 3D Printer Filament Dryer Easdry, 3D Printer Filament Dry Box with Fan, Adjustable Temperature, Humidity Control & Spool Holder, Compatible with 1.75mm 2.85mm 3.00mm Nylon, PLA, TPU
Asin: B0BKFMZQHB | Model: Easdry | PartNumber: Easdry
【Compatible With Multiple Spools】Works For Different Filament Types And Diameters, Compatible With 1.75Mm, 2.85Mm, 3.00Mm 3D Filament Such As Nylon, Pla, Pva, Pc, Petg, Pa, Wood, Abs, Silk, Etc. Exquisite Space Allows Usage Of Single Roll With Spool Size: 220X72mm, Inner Size: 50Mm, With Little Rubber Seals To Fit Around A Ptfe Tube, And Smooth Rotating Shaft Allows The Filament To Continuously Rotate In A Dry Hot Box To Remove Moisture.
【45W Ptc Heater & Built-In Fan】Different From Applying Ordinary Heater 48W Pi Heating Pad To Heat Up Space, Our Product Use 45W Ptc Heater Which Is More Durable, Energy-Saver, And Environmentally Friendly, Makes Filament Drying More Evenly. Also A Built-In Fan Is Designed To Circulate The Hot Air Inside The Filament Dryer Box To Make Drying System Better Remove The Moisture.
【Safety Priority & Customer Service】Eibos Easdry Filament Dryer Has Passed Fcc, With Ul Certified Lr44 Battery, Crafted From V0 Level Material For Superior Fire Resistance, Which Ensures Your Safety During Every Use, You Can Focus On Your Projects Without Any Safety Concerns, As Safety Is Our Priority. Besides, 1-Year After-Sales Guarantee Offered For Your Peace Of Mind.
【Hot-Air Circulation Heating System】Applying Hot Air Circulation Heating Which Makes The Temperesuture Inside Box More Even, Filament Dryer Box Aims At Drying The Wet Or Brittle 3D Printer Filament, Or Even Make It Better Than The Brand New Unit. No Plastic Strings And Clogging, No Need Worry About Your Old Left Out Spools, This Dryer Box Can Help Revive Them Easily.
【Infinite Adjustable Temperature & Humidity Monitor】Based On Infinite Adjustable Temperature Mode, You Can Adjust Specific Heating Temperature To Accommodate Needs Of Various Filaments By Simply Turning The Knob From 40-65℃, With Main Types Of Filaments Marked For Your Fast Use. Equipped With Individual Humidity Sensor, Measurement Range From 10%-99% (❤️🔥Note: A76/Lr44 Button Battery Has Already Included. The Dryer Is Designed To Reduce Humidity Levels To 10%, If The Humidity Indicator Does Not Display Accurately, Please Contact Customer Service Through The 'Ask A Question' Feature For Humidity Sensor Support❤️🔥), Real-Time Data Will Be Indicated By The Lcd Monitor..
Features
- DRYER & STORAGE BOX the dryer box is specifically made for the purpose of drying 3D printer filament, intended to remove the moisture from a spool of filament caused by ambient exposing. Filament can be used while in the box, the dryer function as both storage box and filament holder. Also 2 slots at the corners were designed for placing dessicant,keep your filament in longer drying condition.Sealed protection, comprehensive dust-proof and damp, no impurities. US Plug, input voltage 110V-120V
- INFINITE ADJUSTABLE TEMPERATURE & HUMIDITY MONITOR based on infinite adjustable temperature mode, you can adjust specific heating temperature to accommodate needs of various filaments by simply turning the knob from 40-65 , with main types of filaments marked for your fast use. Equipped with individual humidity sensor, measurement range from 10%-99% ( NOTE: A76/LR44 button battery has ALREADY included. The dryer is designed to reduce humidity levels to 10%, if the humidity indicator does not display accurately, please contact customer service through the 'ask a question' feature for Humidity Sensor Support ), real-time data will be indicated by the LCD monitor.
- COMPATIBLE WITH MULTIPLE SPOOLS works for different filament types and diameters, compatible with 1.75mm, 2.85mm, 3.00mm 3D filament such as Nylon, PLA, PVA, PC, PETG, PA, Wood, ABS, Silk, etc. Exquisite space allows usage of single roll with spool size: 220x72mm, Inner size: 50mm, with little rubber seals to fit around a PTFE tube, and smooth rotating shaft allows the filament to continuously rotate in a dry hot box to remove moisture
- HOT-AIR CIRCULATION HEATING SYSTEM applying hot air circulation heating which makes the temperesuture inside box more even, filament dryer box aims at drying the wet or brittle 3D printer filament, or even make it better than the brand new unit. No plastic strings and clogging, no need worry about your old left out spools, this dryer box can help revive them easily
- 45W PTC HEATER & BUILT-IN FAN different from applying ordinary heater 48W PI heating pad to heat up space, our product use 45W PTC heater which is more durable, energy-saver, and environmentally friendly, makes filament drying more evenly. Also a Built-in fan is designed to circulate the hot air inside the filament dryer box to make drying system better remove the moisture
- SAFETY PRIORITY & CUSTOMER SERVICE eibos easdry filament dryer has passed FCC, with UL certified LR44 battery, crafted from V0 level material for superior fire resistance, which ensures your safety during every use, you can focus on your projects without any safety concerns, as safety is our priority. Besides, 1-Year After-Sales Guarantee offered for your peace of mind
- See more on Amazon...
Brand: EIBOS | Manufacturer: Shenzhen EIBOS Chuanggou Tech Co., Ltd
Dimensions: 4.06 x 8.86 x 8.86 Inches
Warranty: 1 year manufacturer
See On Amazon #3
EIBOS Official 3D Printer Filament Dryer Box Polyphemus with Fan, Auto-Rotation, Auto-Humidity Control & Extra Large Space for 3KG Spools, 1.75mm 2.85mm 3.00mm Nylon, PLA, TPU, 360 Surround Heating
Asin: B0CYRW889Y
【Automatic Humidity & Temperature Control】 No Need Worrying About Taking Extra Time To Dry Your Filament Again, The Automatic Humidity Control Function Enable You To Keep The Filament Inside The Chamber At A Certain Relative Humidity Level, Get Them Ready To Use All The Time. The Drying Temperature Ranges From 20℃ To 70℃, With Default Setting Time From 30Mins-24Hrs, You Can Also Set The Time As Unlimited Per Your Needs, All Setting Parameters Are Clearly Indicated By The Built-In Interface.
【Storage Box & Spool Holder】Printing While Drying, An Adjustable Exhaust Vent On The Lid Allows You To Storage The Filament If Not Actively Drying By Simply Turning It Off, Also 2 Compartments Are Designed For Placing Desiccants For Keeping Your Filament In A Drying Condition In A Long Time. Further More, Small Plugs Are Offered For Sealed Protection, Dust-Proof, No Damp, No Impurities.
【130W Ptc & Hot Air Circulation System】Using A Forced-Hot Air Circulation Heating System To Remove The Moisture Out Of The Box, Applying 130W Ptc That Allows The Dryer Heating More Safely, Environmentally Friendly, More Durable And Energy-Saver. Polyphemus Was Designed With 8 Vents, 2 In The Back, 3 In The Front And 3 On The Top, These Outlets Providing You With Flexibility To Feed Your Filament According To The Directions Of Printers, A Silent Fan Enables The Dryer To Operate Without Any Noise.
【Extra Large Space For 3Kg Spools】Equipped With An Extension Kit That Allows Polyphemus Not Only Suitable For 2 Of Regular 1Kg Spools 210X170mm Simultaneously, But Also Works For A Large 3Kg Spool 250X170mm, Saving Your Time To Change Multiple Spools For Drying. Polyphemus Compatible With Multiple Types And Diameters Of Filaments, You Can Choose The Different Mode For Specific Types Of Filament According To The Drying Time And Heating Level, Including 1.75Mm, 2.85Mm, 3.00Mm Pla, Abs, Petg, Pa, Tpu, Pc, Asa, Pva, Pp, M1, M2, M3.
Features
- AUTOMATIC ROTATING FUNCTION FOR 360 HEATING features with a geared motor that enables your filament rotate automatically to truly realize 360 surround heating, by eliminating temperature variations between the top and bottom of the drying chamber and making the chamber inside heats more evenly, simply activate the rotating mode for drying when you are not printing, a spare motor was included for longer lifespan as well. US Plug, input voltage 110V-120V
- EXTRA LARGE SPACE FOR 3KG SPOOLS equipped with an extension kit that allows Polyphemus not only suitable for 2 of regular 1kg spools 210x170mm simultaneously, but also works for a large 3kg spool 250x170mm, saving your time to change multiple spools for drying. Polyphemus compatible with multiple types and diameters of filaments, you can choose the different mode for specific types of filament according to the drying time and heating level, including 1.75mm, 2.85mm, 3.00mm PLA, ABS, PETG, PA, TPU, PC, ASA, PVA, PP, M1, M2, M3
- AUTOMATIC HUMIDITY & TEMPERATURE CONTROL no need worrying about taking extra time to dry your filament again, the automatic humidity control function enable you to keep the filament inside the chamber at a certain relative humidity level, get them ready to use all the time. The drying temperature ranges from 20 to 70 , with default setting time from 30mins-24hrs, you can also set the time as unlimited per your needs, all setting parameters are clearly indicated by the built-in interface
- 130W PTC & HOT AIR CIRCULATION SYSTEM using a forced-hot air circulation heating system to remove the moisture out of the box, applying 130W PTC that allows the dryer heating more safely, environmentally friendly, more durable and energy-saver. Polyphemus was designed with 8 vents, 2 in the back, 3 in the front and 3 on the top, these outlets providing you with flexibility to feed your filament according to the directions of printers, a silent fan enables the dryer to operate without any noise
- STORAGE BOX & SPOOL HOLDER printing while drying, an adjustable exhaust vent on the lid allows you to storage the filament if not actively drying by simply turning it off, also 2 compartments are designed for placing desiccants for keeping your filament in a drying condition in a long time. Further more, small plugs are offered for sealed protection, dust-proof, no damp, no impurities
- See more on Amazon...
Brand: EIBOS | Manufacturer: EIBOS
Dimensions: 10.90 x 10.80 x 8.00 Inches | Weight: 6.60 Pounds
Warranty: 1 year warranty
See On Amazon #4
FIXDRY 3D Printer Filament Dryer with Fan,Adjustable Temp & Humidity Sensor,110W PTC Dehydrator Dry Box,2 Spool Compatible with PLA Nylon TPU PETG 1.75mm 2.85mm 3.00mm
Asin: B0C8D39GQD
Adjustable Temperature And Humidity Lcd Screen: Users Can Adjust The Heating Temperature (Up To 70°C) And Heating Time (0-48 Hours) To Accommodate The Specific Needs Of Their 3D Filaments. The Product Comes With Specialized Advice For Heating Time And Temperature For Different 3D Filaments..
Rigorous Security Testing: The Fixdry Has Undergone Strict Experiments And All-Round Tests Before Leaving The Factory, And Has Corresponding Certificates Such As Ce, Fcc, Pse, Ukca, And Reach. Users Can Trust In The Product's Safety And Reliability..
Closed-Loop Constant Heating: The Fixdry Features Real-Time Monitoring Of The Temperature In The Box, Using A Closed-Loop Intermittent Heating Mode To Keep The Temperature Constant. This Mode Is More Energy-Saving And Safe..
Powerful 110W Ptc Heater And Fan: The Fixdry Features A High-Powered 110W Built-In Ptc Heater And A Circulating Fan, Providing Even And Efficient Drying During 3D Printing. Ptc Heaters Are Also Known For Their Durability, Energy-Saving Properties, And Environmental Friendliness..
Features
- Effective Filament Drying: The FIXDRY filament dryer is specifically designed to remove moisture from 3D printer filaments, preventing issues such as stringing, clogging, poor adhesion, and layer shift, which can result in poor 3D prints.
- Powerful 110W PTC Heater and Fan: The FIXDRY features a high-powered 110W built-in PTC heater and a circulating fan, providing even and efficient drying during 3D printing. PTC heaters are also known for their durability, energy-saving properties, and environmental friendliness.
- Adjustable Temperature and Humidity LCD Screen: Users can adjust the heating temperature (up to 70 C) and heating time (0-48 hours) to accommodate the specific needs of their 3D filaments. The product comes with specialized advice for heating time and temperature for different 3D filaments.
- Closed-Loop Constant Heating: The FIXDRY features real-time monitoring of the temperature in the box, using a closed-loop intermittent heating mode to keep the temperature constant. This mode is more energy-saving and safe.
- Rigorous Security Testing: The FIXDRY has undergone strict experiments and all-round tests before leaving the factory, and has corresponding certificates such as CE, FCC, PSE, UKCA, and REACH. Users can trust in the product's safety and reliability.
- See more on Amazon...
Brand: FIXDRY | Manufacturer: FIXDRY
Weight: 3.97 Pounds
See On Amazon #5
EIBOS Official 3D Printer Filament Dryer Easdry, 3D Printer Filament Dry Box with Fan, Adjustable Temperature, Humidity Control & Spool Holder, Compatible with 1.75mm 2.85mm 3.00mm Nylon, PLA, TPU
Asin: B0CY51CQ74 | Model: Easdry | PartNumber: Easdry
【Compatible With Multiple Spools】Works For Different Filament Types And Diameters, Compatible With 1.75Mm, 2.85Mm, 3.00Mm 3D Filament Such As Nylon, Pla, Pva, Pc, Tpu, Petg, Pa, Wood, Abs, Silk, Etc. Exquisite Space Allows Usage Of Single Roll With Spool Size: 220X72mm, Inner Size: 50Mm, With Little Rubber Seals To Fit Around A Ptfe Tube, And Smooth Rotating Shaft Allows The Filament To Continuously Rotate In A Dry Hot Box To Remove Moisture.
【45W Ptc Heater & Built-In Fan】Different From Applying Ordinary Heater 48W Pi Heating Pad To Heat Up Space, Our Product Use 45W Ptc Heater Which Is More Durable, Energy-Saver, And Environmentally Friendly, Makes Filament Drying More Evenly. Also A Built-In Fan Is Designed To Circulate The Hot Air Inside The Filament Dryer Box To Make Drying System Better Remove The Moisture. Besides, 1 Year After-Sale Gurantee Offered For Your Peace Of Mind..
【Hot-Air Circulation Heating System】Applying Hot Air Circulation Heating Which Makes The Temperesuture Inside Box More Even, Filament Dryer Box Aims At Drying The Wet Or Brittle 3D Printer Filament, Or Even Make It Better Than The Brand New Unit. No Plastic Strings And Clogging, No Need Worry About Your Old Left Out Spools, This Dryer Box Can Help Revive Them Easily.
【Infinite Adjustable Temperature & Humidity Monitor】Based On Infinite Adjustable Temperature Mode, You Can Adjust Specific Heating Temperature To Accommodate Needs Of Various Filaments By Simply Turning The Knob From 40-65℃, With Main Types Of Filaments Marked For Your Fast Use. Equipped With Individual Humidity Sensor, Measurement Range From 10%-99% (Note: A76/Lr44 Button Battery Has Already Included), Real-Time Data Will Be Indicated By The Lcd Monitor. ❤️🔥The Dryer Is Designed To Reduce Humidity Levels To 10%, If The Humidity Indicator Does Not Display Accurately, Please Contact Customer Service Through The 'Ask A Question' Feature For ❤️🔥Humidity Sensor Support❤️🔥.
Features
- DRYER & STORAGE BOX the dryer box is specifically made for the purpose of drying 3D printer filament, intended to remove the moisture from a spool of filament caused by ambient exposing. Filament can be used while in the box, the dryer function as both storage box and filament holder. Also 2 slots at the corners were designed for placing dessicant,keep your filament in longer drying condition.Sealed protection, comprehensive dust-proof and damp, no impurities. US Plug, input voltage 110V-120V
- INFINITE ADJUSTABLE TEMPERATURE & HUMIDITY MONITOR based on infinite adjustable temperature mode, you can adjust specific heating temperature to accommodate needs of various filaments by simply turning the knob from 40-65 , with main types of filaments marked for your fast use. Equipped with individual humidity sensor, measurement range from 10%-99% (NOTE: A76/LR44 button battery has ALREADY included), real-time data will be indicated by the LCD monitor. The dryer is designed to reduce humidity levels to 10%, if the humidity indicator does not display accurately, please contact customer service through the 'ask a question' feature for Humidity Sensor Support
- COMPATIBLE WITH MULTIPLE SPOOLS works for different filament types and diameters, compatible with 1.75mm, 2.85mm, 3.00mm 3D filament such as Nylon, PLA, PVA, PC, TPU, PETG, PA, Wood, ABS, Silk, etc. Exquisite space allows usage of single roll with spool size: 220x72mm, Inner size: 50mm, with little rubber seals to fit around a PTFE tube, and smooth rotating shaft allows the filament to continuously rotate in a dry hot box to remove moisture
- HOT-AIR CIRCULATION HEATING SYSTEM applying hot air circulation heating which makes the temperesuture inside box more even, filament dryer box aims at drying the wet or brittle 3D printer filament, or even make it better than the brand new unit. No plastic strings and clogging, no need worry about your old left out spools, this dryer box can help revive them easily
- 45W PTC HEATER & BUILT-IN FAN different from applying ordinary heater 48W PI heating pad to heat up space, our product use 45W PTC heater which is more durable, energy-saver, and environmentally friendly, makes filament drying more evenly. Also a Built-in fan is designed to circulate the hot air inside the filament dryer box to make drying system better remove the moisture. Besides, 1 year after-sale gurantee offered for your peace of mind.
- See more on Amazon...
Brand: EIBOS | Manufacturer: Shenzhen EIBOS Chuanggou Tech Co., Ltd
Dimensions: 8.86 x 8.86 x 4.06 inches | Weight: 3.00 Pounds
Warranty: 1 YEAR WARRANTY
See On Amazon #6
[with Fan] SUNLU Official 3D Printer Filament Dryer S2, Filament Storage Dehydrator for 3D Printing, Built-in Fan, Dryer Box S2 for PLA Nylon PA ABS PETG 1.75 2.85 3.00mm, Black
Asin: B09WRGLSR1 | Model: SUNLU 3D printer filament dryer s2 | PartNumber: SUNLU 3D printer filament dryer s2
【One-Click Personalization, Remember Your Operation】 Sunlu Filadryer S2 New 3.42*2.87 Inch Touch Screen, Tablet-Like Operation Experience. One-Key Switching Between ℃ And ℉. According To Various Filament, User-Friendly One-Key Recommended Temperature Setting. The Settings Before The Shutdown Will Be Remembered Until You Change Settings Again. Sunlu S2 Can Be Operated Simultaneously With The 3D Printers, Freeing Hands..
【Compatible With 99% Of 3D Filament, Including Nylon Filament Etc.】 Compatible With All The Mainstream 3D Filament Brands And All Standard Filament Diameters 1.75Mm 2.85Mm 3.00Mm; Works Perfectly With Pla、Pla+、Petg、Tpu、Abs Etc. Sunlu Can Also Dry Pa Pc Nylon Filament And Other High-End 3D Filament..
【Real-Time Humidity Detection, Visualization Of Dry Conditions】 Sunlu Dryer S2 Built-In High-Precision Humidity Detection Sensor, Displaying Real-Time Humidity Inside The Filament Dryer S2. The Change Of The Led Lamp Ring Show The Working Status Of Dryer Box, Visualization Of The Drying Process..
【Extended Adjustable Temperature Range, Longer Continuous Drying Time】 Compared With Sunlu Dryer Box S1, Sunlu 3D Printer Filament Dryer S2 Adjustable Temperature Range Is 35℃-70℃. Drying Time Of The Filament Dryer Box Is Adjustable. The Adjustable Range Of Time Is 0-99 Hours. This Filament Storage Dehydrator Can Automatic Sleep Standby After Drying..
Features
- Newest upgraded Filament Dryer box, Keep filament dry SUNLU S2 3D filament dryer box adopts a double heating element structure, which heats up faster and evenly heat. The SUNLU filament dryer box has added upper and lower heating plates to achieve all-round surrounding heating and rapid drying. Keep the 3D printer filament dry, no more brittle/string/poor adhesion, print smoothly.
- Extended adjustable temperature range, Longer continuous drying time Compared with SUNLU dryer box S1, SUNLU 3D printer filament dryer s2 adjustable temperature range is 35 -70 . Drying time of the filament dryer box is adjustable. The adjustable range of time is 0-99 hours. This filament storage dehydrator can automatic sleep standby after drying.
- One-click personalization, Remember Your Operation Sunlu Filadryer S2 New 3.42*2.87 inch touch screen, tablet-like operation experience. One-key switching between and . According to various filament, user-friendly one-key recommended temperature setting. The settings before the shutdown will be remembered until you change settings again. SUNLU S2 can be operated simultaneously with the 3D printers, freeing hands.
- Real-time humidity detection, Visualization of dry conditions SUNLU dryer S2 Built-in high-precision humidity detection sensor, displaying real-time humidity inside the filament dryer S2. The change of the LED lamp ring show the working status of dryer box, visualization of the drying process.
- Compatible with 99% of 3D filament, including Nylon filament etc. Compatible with all the mainstream 3D filament brands and all standard filament diameters 1.75mm 2.85mm 3.00mm; Works perfectly with PLA PLA+ PETG TPU ABS etc. SUNLU can also dry PA PC Nylon filament and other high-end 3D filament.
- See more on Amazon...
Brand: SUNLU | Manufacturer: SUNLU
Weight: 2.20 Pounds
See On Amazon
Looking For Something Else?
Search