Creality Official 3 Meter Capricorn Teflon Tube PTFE Bowden Tubing 1.75mm Filament, Low Friction for Ender 3/3 Pro/3 V2 Ender 3 Neo/Ender 3 V2 Neo/Ender 3 Max Neo Ender 5 S1 K1/K1 Max/K1C 3D Printer
Asin: B0BFVDGYZZ | Model: Creality 3M Teflon | PartNumber: Creality 3M Teflon
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.⭕【4 Major Advantages】Creality Capricorn Tube Is Resistant To High Temperatures Up To 300°C, Which Is Very Suitable For Printing Special Filaments Such As Abs, Nylon, And Polycarbonate. High Lubrication, Corrosion Resistance, Pressure And Wear Resistance, Aging Resistance, Radiation Resistance, Low Permeability, Long-Term Exposure, And No Deformation In The Atmosphere..
👍【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
⭕【Sophisticated Selection Of Materials】Creality Capricorn Premium Xs Bowden Is Specially Developed For 1.75Mm Consumables. It Has A Very Precise Inner Diameter, A Highly Consistent Shape, And An Inner Diameter. The Diameter Is Consistent And Perfectly Round To Ensure Lubrication Of The Wire, 1.9Mm Inner Diameter. Even On The Longest Bowden System, You Can Print Flexible Filaments..
🆗【Advanced Technology】Capricorn Ptfe Tube 1.75Mm Is Far Better Than The White Ptfe Tube That Comes With Any 3D Printer. It Is Manufactured According To The Highest Specification Of 1.75Mm Filament. It Has The Lowest Friction 1.75Mm Filament On The Market And The Inner Diameter Is 1.9Mm. It Is An Ideal Oil-Free Lubricating Material. Less Friction Means Faster Response, Less Retraction, And Saves More Time..
Features
- Quality Assurance Creality 100% official, 3M Capricorn premium XS Bowden tube is all original and high quality from 100% quality assurance. Creality selects imported Teflon tubes, which are not only high-quality but also highly adaptable, with a low loss rate, suitable for Ender 3 Series, Ender 5 Series, CR-10 Series, K1 K1 Max K1C 3D Printer.
- Advanced Technology Capricorn PTFE tube 1.75mm is far better than the white PTFE tube that comes with any 3D printer. It is manufactured according to the highest specification of 1.75mm filament. It has the lowest friction 1.75mm filament on the market and the inner diameter is 1.9mm. It is an ideal oil-free lubricating material. Less friction means faster response, less retraction, and saves more time.
- 4 Major Advantages Creality Capricorn tube is resistant to high temperatures up to 300 C, which is very suitable for printing special filaments such as ABS, nylon, and polycarbonate. High lubrication, corrosion resistance, pressure and wear resistance, aging resistance, radiation resistance, low permeability, long-term exposure, and no deformation in the atmosphere.
- Sophisticated Selection of Materials Creality Capricorn Premium XS Bowden is specially developed for 1.75mm consumables. It has a very precise inner diameter, a highly consistent shape, and an inner diameter. The diameter is consistent and perfectly round to ensure lubrication of the wire, 1.9mm inner diameter. Even on the longest Bowden system, you can print flexible filaments.
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Weight: 0.18 pounds
See On Amazon Similar To Creality Official 3 Meter Capricorn
#1
Creality Upgrade Ender 3 Hotend, Assembled Extruder with Capricorn Bowden PTFE Tubing for Creality Ender 3 Pro/Ender 3 V2 with Silicone Cover 3, 0.4mm Ender 3 Nozzle 3 and 2 Pair Pneumatic Couplers
Asin: B082PGCF2B | Model: ENDER3-PT | PartNumber: ENDER3-PT
Pluggable: The Heating Tube And Temperature Thermistor That From Control Box, Connect Them With Terminal Housing And Pin. Then You Could Plug The Hotend Kit, Easier To Replace Hotend Kit..
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Braided Wire Was Heating Tube 24V40w..
With More Terminal Housing And Pins As Spare Parts, In Case Fail Installation And Waste..
Original Capricorn Xs Serious Bowden Ptfe Tubing With Lowest Friction On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills..
Features
- It's 100% Creality Original Upgrade Assembled Extruder Hotend.
- Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
- Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
- With more terminal housing and pins as spare parts, in case fail installation and waste.
- MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Weight: 0.30 pounds
See On Amazon #2
Upgrade 3D Printer Accessories with All Metal Extruder Feeder, Capricorn Bowden Tubing, Pneumatic Couplers, Bed-Level Springs for Creality Ender 3/Ender 3 Pro/Ender 5 Pro/Ender 5 Plus Ender 3 Upgrades
Asin: B081DN6RM2 | Model: ENDER 3-TAOJIAN | PartNumber: ENDER 3-TAOJIAN
Creality Die Springs - Those Springs Are Extra Firm And Help To Hold The Bed Level For Longer While Being More Resistant Against Wearing Out And Loosing Compression. Level The Bed Once And It Should Hold For More Prints With These High Performance Stiff Springs. Pc4-M6 & Pc4-M10 Pneumatic Fittings Are Also Included For Replacement Use On Any Stock Creality Hotends..
Wide Compatibility - The Creality Ender 3 Upgrades Kit Can Used On Other Creality 3D Printers, Like Cr-10/ Cr-10S / Cr-10S Pro/ Cr-6Se/ Ender 3 / Ender 3 Pro /Ender 5 / Ender 5 Pro/ Ender 5 Plus/ Ender 6/ Ender-7..
Easy To Assemble--- Our Ender 3 Extruder And 1 Meter Capricorn Tubing Includes All The Necessary Screws & Parts Needed, It Can Directly Replace Your Old Original Fragile Plastic Extruder. You Can Assemble It Quickly By Viewing The Assembly Diagram..
100% Original Capricorn Xs Bowden Tube For 1.75Mm Filament - Capricorn Ptfe Tube Is Regarded As The Highest Quality Ptfe Tubing In All Of 3D Printing. The Tight Tolerances Make Sure That The Filament Is Lead Directly To The Hotend With As Little Room For Error As Possible Between The Extruder And The Hotend. It Is Rated For Withstanding The Highest Temperature In The Market Which Is Perfect For Printing Filaments Such As Pla, Petg, Abs, Nylon. Fits For 1.75Mm 3D Printer Filament..
Features
- 3D Printer Extruder - Instantly provide improved print quality and reduce filament slipping by firmly grasping the filament between two threaded wheels locked together. No more skipped steps when extruding at high speeds or after retractions. Print faster with this superior design, which is able to feed much more filament into the hotend in the same period of time than stock plastic extruders.
- 100% Original Capricorn XS Bowden Tube for 1.75mm filament - Capricorn ptfe tube is regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. It is rated for withstanding the highest temperature in the market which is perfect for printing filaments such as PLA, PETG, ABS, Nylon. Fits for 1.75mm 3d printer Filament.
- Creality Die Springs - Those springs are extra firm and help to hold the bed level for longer while being more resistant against wearing out and loosing compression. Level the bed once and it should hold for more prints with these high performance stiff springs. PC4-M6 & PC4-M10 pneumatic fittings are also included for replacement use on any stock creality hotends.
- Easy to Assemble--- Our ender 3 extruder and 1 meter capricorn tubing includes all the necessary screws & parts needed, it can directly replace your old original fragile plastic extruder. You can assemble it quickly by viewing the assembly diagram.
- Wide Compatibility - The Creality ender 3 upgrades kit can used on other creality 3d printers, like CR-10/ CR-10S / CR-10S Pro/ CR-6SE/ Ender 3 / Ender 3 Pro /Ender 5 / Ender 5 Pro/ Ender 5 Plus/ Ender 6/ Ender-7.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Comgrow
Weight: 0.31 pounds
See On Amazon #3
Creality Capricorn Bowden Tubing 1M, Bowden PTFE Tube for 1.75mm Filament with 2X PC4-M6 Extruder Fitting & 2X PC4-M10 Hotend Fitting for Ender 3 V2/3/3 V3 SE/5/K1 Max 3D Printer
Asin: B09GM6W972
Smoother Filament Output: Designed For 1.75Mm Filament, Creality Capricorn Tubing Has Extremely Accurate Inner & Outer Diameters, And Filament Loads Smoothly Into The Hotend With As Little Room For Error As Possible Between The Extruder And The Hotend..
Great Package: The Package Comes With Two Pc4-M6 Fittings For The Extruder And Two Pc4-M10 Couplers For The Hot End, Its 2Mm Inner Diameter Is Used For The Teflon Tube With An Outer Diameter Of 4Mm. It Includes Everything You Need To Get Started!.
1 Meter Tube With 2Mm Id 4Mm Od: Teflon Tube Length: 1 Meter, Inner Diameter: 1.95Mm ± 0.05Mm, Outer Diameter: 4Mm. The Optimal Inner Diameter Size Is Designed To Reduce "Wiggle Room" Or Flex In The Tube, Allowing You To Print Flexible Filaments Even On The Longest Bowden Systems..
Compatible With More Filaments: This Bowden Tube Is Reinforced With A Proprietary Blend Of High-Performance Additives That Can Withstand Higher Temperatures Than Any Other Tubes, Making It Ideal For Printing Specialty Filaments Such As Abs, Nylon, And Polycarbonate. This Ptfe Tube Xs Tubing Can Keep Working At Temperatures Up To 260°C..
Features
- Genuine Upgrades: Creality Capricorn XS Series Bowden PTFE tubing is the lowest friction premium tubing on the market with faster response, less retraction, and more accurate prints. There is less slippage, wear and tear on the extruder and less clogging when printing chunky filaments such as some wood fillers or iron fillers.
- Compatible with More Filaments: This Bowden tube is reinforced with a proprietary blend of high-performance additives that can withstand higher temperatures than any other tubes, making it ideal for printing specialty filaments such as ABS, nylon, and polycarbonate. This PTFE tube XS tubing can keep working at temperatures up to 260 C.
- Smoother Filament Output: Designed for 1.75mm filament, Creality Capricorn tubing has extremely accurate inner & outer diameters, and filament loads smoothly into the hotend with as little room for error as possible between the extruder and the hotend.
- 1 Meter Tube with 2MM ID 4MM OD: Teflon tube length: 1 Meter, inner diameter: 1.95mm 0.05mm, outer diameter: 4mm. The optimal inner diameter size is designed to reduce wiggle room or flex in the tube, allowing you to print flexible filaments even on the longest Bowden systems.
- Great Package: The package comes with two PC4-M6 fittings for the extruder and two PC4-M10 couplers for the hot end, its 2mm inner diameter is used for the Teflon tube with an outer diameter of 4mm. It includes everything you need to get started!
- See more on Amazon...
Brand: Mefine | Manufacturer: Creality
Weight: 0.11 pounds
See On Amazon #4
Creality Ender 3 /Pro/V2 3D Printer Assembled Extruder MK8 HotEnd Kit 24V with 0.4mm Nozzle Upgrade with Low Friction Creality-Capricorn Tubing
Asin: B07WNQP916 | Model: ENO-Ender3-Hotend-Bluetube | PartNumber: ENO-Ender3-Hotend-Bluetube | Ean: 0705300791497, 0198549003108 | UPC: 705300791497, 198549003108
Hotend Replacement Parts Suitable For Ender 3, Ender-3X, Ender-3 Pro, Ender 3 V2 3D Printer..
Creality-Capricorn Tube Is Far Superior To The White Ptfe Tubing Supplied With Most 3D Printers. Its Much Smoother To Feed Filament Through. And When Printing It Reduces The Drag On The Extruder Giving A Much Smoother Travel And Print Quality..
High Lubricity Additives Make Our Xs Series Tubing The Lowest Friction Bowden Tubing On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills. Lower Retraction Means Time Saved Every Time The Extruder Retracts. Over The Course Of A Print, A Few Milliseconds Here And A Few There Add Up To A Lot Of Time Saved..
Upgrade With Low Friction Creality-Capricorn Original Teflon Tube 40Cm..
Features
- It's 100% Creality Original and Creality-Capricorn PTFE Tubing.
- Upgrade with Low Friction Creality-Capricorn Original Teflon Tube 40CM.
- Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro, Ender 3 V2 3d printer.
- High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills. Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved.
- Creality-Capricorn tube is far superior to the white PTFE tubing supplied with most 3D printers. Its much smoother to feed filament through. And when printing it reduces the drag on the extruder giving a much smoother travel and print quality.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #5
Creality Official All Metal Extruder Gray and 1M Capricorn Bowden PTFE Tubing 1.75mm 3D Printer Accessories Kit with Pneumatic Coupler Silicone Sock for Ender-3 Series Ender-5 Series CR-10 Series
Asin: B09N78JCV1 | Model: Creality Extruder Gray Teflon | PartNumber: Creality Extruder Gray Teflon
📍【Great Value Spare Parts】4Pcs Upgraded Bed-Level Springs Are Made Of High-Quality Spring Steel, Fatigue And Heat-Resistant, Durable For Use. They Will Allow You To Print At A Higher Speed Without Worrying About Any Wobble. Two Silicone Covers Included Greatly Help To Stabilize The Temperature Of The Hotend And Nozzle Clean Around..
📍【After Sales Support】More Than 20 Engineers Provide 24/7 Customer Service With 12-Months Limited And Lifetime Technical Assistance. Please Kindly Contact Us(Seller) Via “Ask A Question” Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What Question..
📍【Easy To Install】Diy Kit And You Need To Assemble By Yourself. The Full Installation Kit For The Extruder Is Included. Referring To Our Picture To Install Extruder, It Is Very Easy And Straightforward To Switch To This Upgraded Part On Your Machine. (Note: The Springs Are Around 25Mm Long, Which Is Longer Than Creality Ender 3/Ender 3 Pro/Ender 3 V2 Springs. You May Use A Tool To Cut It To Be Shorter If You Need It Or Adjust The Hotbed To Be Higher To Fit The Springs.).
📍【Capricorn Ptfe Tube】100% Original Creality Capricorn Xs Series Tubing. Capricorn Bowden Ptfe Tube Is Enhanced With A Proprietary Blend Of High-Performance Additives. It Was Developed Specifically For 1.75Mm Filament With An Extremely Precise Internal Diameter..
Features
- Quality Assurance Creality 100% official MK8 all-metal extruder. High-quality aluminum alloy material and sandblast to surface oxidization, ensuring this gray extruder is last for long-term use. Works better than original plastic stock extruder. Our 3D printer extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed.
- Capricorn PTFE Tube 100% Original Creality Capricorn XS series Tubing. Capricorn Bowden PTFE Tube is enhanced with a proprietary blend of high-performance additives. It was developed specifically for 1.75mm filament with an extremely precise internal diameter.
- Great Value Spare Parts 4pcs Upgraded bed-level springs are made of high-quality spring steel, fatigue and heat-resistant, durable for use. They will allow you to print at a higher speed without worrying about any wobble. Two silicone covers included greatly help to stabilize the temperature of the hotend and nozzle clean around.
- Easy To Install DIY kit and you need to assemble by yourself. The full installation kit for the extruder is included. Referring to our picture to install Extruder, it is very easy and straightforward to switch to this upgraded part on your machine. (NOTE: The springs are around 25mm long, which is longer than Creality ender 3/ender 3 pro/ender 3 V2 springs. You may use a tool to cut it to be shorter if you need it or adjust the hotbed to be higher to fit the springs.)
- After Sales Support More than 20 engineers provide 24/7 customer service with 12-months limited and lifetime technical assistance. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #6
Creality Official Capricorn Bowden Tubing 2M, PTFE Teflon Tube Support 1.75mm Filament Heat Resistant High Lubrication Low Friction for Ender-3/3 Pro / 3 Max / 3 V2 / Ender-5 Series/CR-10 Series
Asin: B0C1GR2VTR
【Low Friction Coefficient 0.04】- High Lubrication, The Minimum Friction Coefficient Is 0.04. Reduces Friction During Printing, Preventing Filaments From Getting Stuck. Specially Designed For 1.75Mm Filament, Creality Bowden Tube Has A 1.9Mm Tube Inner Diameter. Precise Inner Diameter, Uniform Tube Shape And Perfectly Round Shape Inner Diameter Ensure Even And Smooth Filament Flow During Printing..
【What You Will Get】 - You Will Get The Original Creality Capricorn Bowden Tube X1. We Provide Friendly And Fast Customer Service To Solve Your Problem Within 24 Hours. If You Have Any Questions, Please Do Not Hesitate To Contact Us..
【High-Quality Material】 - Selected The High-Quality Imported Ptfe Resin. This Bowden Tube Is More Flexible, Heat-Resistant, Low Friction Coefficient, And No Stickiness On The Surface. Compared With Ordinary White Teflon Tubes, This Bowden Tube Is Not Easy To Be Carbonized Under High Temperature..
【Heat Resistant To 260℃】 - High Melting Point, High-Temperature Resistance Up To 260 ℃; Corrosion Resistance, Withstand Molten Alkali, Strong Oxidant, Reductant And Various Organic Solvents; Aging Resistance, Even Exposure To The Air Long-Term Will Not Be Deformed..
Features
- Original Quality - 100% original Creality Capricorn Bowden Tube. There are three lengths of Bowden tubes: 1 m, 2 m, and 3 m. Good quality, low loss rate. It is compatible with Creativity FDM printers. For example, Ender-3 series, Ender-5 series, and CR-10 series.
- Heat Resistant to 260 - High melting point, high-temperature resistance up to 260 ; Corrosion resistance, withstand molten alkali, strong oxidant, reductant and various organic solvents; Aging resistance, even exposure to the air long-term will not be deformed.
- Low Friction Coefficient 0.04 - High lubrication, the minimum friction coefficient is 0.04. Reduces friction during printing, preventing filaments from getting stuck. Specially designed for 1.75mm filament, Creality Bowden tube has a 1.9mm tube inner diameter. Precise inner diameter, uniform tube shape and perfectly round shape inner diameter ensure even and smooth filament flow during printing.
- High-Quality Material - Selected the high-quality imported PTFE resin. This Bowden Tube is more flexible, heat-resistant, low friction coefficient, and no stickiness on the surface. Compared with ordinary white Teflon tubes, this Bowden Tube is not easy to be carbonized under high temperature.
- What You Will Get - You will get the original Creality Capricorn Bowden Tube x1. We provide friendly and fast customer service to solve your problem within 24 hours. If you have any questions, please do not hesitate to contact us.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Weight: 0.07 pounds
See On Amazon #7
Official Creality Ender 3 V2 Filament Runout Sensor, Smart Filament Break Detection Detector for Ender 3, Ender 3 Pro, Ender3 Max Ender 5 Plus with 32 Bit V4.2.2/V4.2.7 Motherboard
Asin: B09NKWSZ31 | Model: Creality Filament Sensor | PartNumber: Creality Filament Sensor
【Precise Detection】 Blue Led Indicates Normal Filament Feed-In, When The Blue Led Turns Off, It Means Filament Runs Out..
【After Sales Service】Creality Pays Great Attention To The Buyer’S User Experience. If You Have Unsolvable Problems During Installation And Use, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
【Upgraded Design】It Is Redesigned With New Inner Structure. The Outer Cover Is Frosted, Making It Stylish And Unique..
【Smooth Filament Travelling】 The Filament Sensor Has A Built-In Filament Guider, Which Is Made Of Metal Material With Smooth Surface, Reducing Friction Resistance And Ensuring Smooth Filament Feed-In..
Features
- High Compatible Suitable for Ender 3/ Ender 3 V2/ Ender 3 pro /Ender 3 MAX/Ender 5 Plus/ CR-10S PRO/ CR-10 V2 V3 with 32 bit V4.2.2/V4.4.7. Only Ender 3 Series need to replace extruder bracket.
- Smooth filament travelling The filament sensor has a built-in filament guider, which is made of metal material with smooth surface, reducing friction resistance and ensuring smooth filament feed-in.
- Precise Detection Blue LED indicates normal filament feed-in, when the Blue LED turns off, it means filament runs out.
- Upgraded Design It is redesigned with new inner structure. The outer cover is frosted, making it stylish and unique.
- After Sales Service Creality pays great attention to the buyer s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #8
Authentic Capricorn PTFE Bowden Tubing (2 Meter) XS Series for 1.75mm Filament with PTFE Teflon Tube Cutter and 2pcs PC4-M6 and 2pcs PC4-M10 Pneumatic Fittings
Asin: B08D3K9DK2 | Model: TBCT2 | PartNumber: TBCT2 | Ean: 0778992842815 | UPC: 778992842815
Advanced Material: Capricorn Ptfe Tubing Can Resist Higher Temperature Than Any Other Tubing, Which Is Perfect For Printing Exotic Filaments Such As Abs, Nylon, And Polycarbonate. This Capricorn Xs Tubing Can Keep Working At High Temperatures Up To 260℃..
Specifications: 2M Capricorn Bowden Ptfe Tubing (1.95Mm ± 0.05Mm Inner Diameter, 4Mm Outer Diameter). Reducing The "Wiggle Room" Or Buckling, Inside The Tube, Allowing You To Print Flexible Filaments Even On The Longest Bowden Systems..
Perfect Package: Package Comes With Two Pc4-M6 Fitting For Extruder And Two Pc4-M10 Fitting For Hotend, One Ptfe Tube Cutter, Which Can Cut Flat On Both Sides To Prevent Any Malfunctions Or Heat Creep When Feeding And Retracting..
Best Performance: Capricorn Bowden Tubing Is Designed Specifically For 1.75Mm Filament With Extremely Precise Inner & Outer Diameter, The Filament Is Loaded Smoothly To The Hotend With As Little Room For Error As Possible Between The Extruder And The Hotend..
Features
- Authentic Guaranteed: The Capricorn Premium XS Bowden Tubing is enhanced with a proprietary blend of high performance additives, it is well regarded as the highest quality PTFE tubing in all of 3D printing.
- Best Performance: Capricorn bowden tubing is designed specifically for 1.75mm filament with extremely precise inner & outer diameter, the filament is loaded smoothly to the hotend with as little room for error as possible between the extruder and the hotend.
- Advanced Material: Capricorn PTFE Tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS, Nylon, and Polycarbonate. This Capricorn XS tubing can keep working at high temperatures up to 260 .
- Perfect Package: Package comes with two PC4-M6 fitting for extruder and two PC4-M10 fitting for hotend, one PTFE tube cutter, which can cut flat on both sides to prevent any malfunctions or heat creep when feeding and retracting.
- Specifications: 2M Capricorn Bowden PTFE Tubing (1.95mm 0.05mm inner diameter, 4mm outer diameter). Reducing the wiggle room or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems.
- See more on Amazon...
Brand: Mefine | Manufacturer: Mefine
See On Amazon #9
Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament (Genuine Capricorn Premium Tubing)
Asin: B079P92HN9 | Model: CXS1751M | PartNumber: CXS1751M | Ean: 7432114996918
Id: 1.95Mm ± 0.05Mm.
Od: 4.0Mm.
Length: 1 Meter.
Brand: Capricorn | Manufacturer: Capricorn
See On Amazon #10
Creality Capricorn 2 Meters XS Series Low Friction PTFE Bowden Tubing for 1.75mm Filament with PTFE Tube Cutter for Creality Ender 3 Ender 3 Pro Cr-10 3D Printer
Asin: B07SBKMZDB | Ean: 0649910376838 | UPC: 649910376838
Lower Retraction Will Save You More Time While The Extruder Retracts In Printing..
Advanced Material Of Capricorn Xs Series Can Make It Resist Higher Temperature, Capricorn Xs Tubing Will Operate At Even Higher Temperatures Than Our Tl..
1.9Mm ± 0.05Mm Inner Diameter Reduces The "Wiggle Room," Or Buckling, Inside The Tube, Allowing You To Print Flexible Filaments Even On The Longest Bowden Systems..
High Lubricity Additives Make Xs Series Tubing The Lowest Friction Bowden Tubing On The Market. More Responsiveness, Accurate Prints， Less Retraction ， Slippage, Wear, And Tear On The Extruder,Which Make The Capricorn Tubing Advanced In All Series..
Features
- 100% Original Capricorn XS Serious tubing Original
- High Lubricity Additives make XS Series tubing the lowest friction bowden tubing on the market. More responsiveness, accurate prints less retraction slippage, wear, and tear on the extruder,which make the Capricorn tubing advanced in all series.
- Lower retraction will save you more time while the extruder retracts in printing.
- 1.9mm 0.05mm Inner Diameter Reduces the wiggle room, or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems.
- Advanced material of Capricorn XS Series can make it resist higher temperature, Capricorn XS tubing will operate at even higher temperatures than our TL.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
See On Amazon #11
Creality CR Touch Auto Bed Leveling Sensor Kit for 32 Bit V4.2.2/(.7) Mainboard Ender 3v2/3/Pro/Ender 5/Pro/CR-10,Capricorn PTFE Bowden Tubing 1M,Aluminum Extruder, 0.4mm Nozzle, PC4-M6/M10 Fittings
Asin: B09BVTQR6M | Model: crzh-gz | PartNumber: crzh-gz
Easy Firmware Installation:Simply Download The Cr Touch Firmware From The Creality Official Website And Save The File To Your Printer’S Memory Card. Insert The Card In To Your Printer. Turn On The Printer And Wait A Few Seconds For The Firmware To Install..
This Bundle Includes Capricorn Ptfe Teflon Tubing Which Is Enhanced With A Proprietary Blend Of High Performance Additives. It Was Developed Specifically For 1.75Mm Filament With An Extremely Precise 1.9Mm ± 0.05Mm Internal Diameter. Reduces The ""Wiggle Room,"" Or Buckling, Inside The Tube, Allowing You To Print Flexible Filaments Even On The Longest Bowden Systems.The Aluminum Extruder Is Lightweight And Strong, Ensuring A More Even Feed Rate Over Time ..
Enhanced Leveling With Precision Of +/- 0.005Mm. This Allows For Easy Leveling With Pinpoint Accuracy..
Compatible: This Cr Touch Fits For Creality Ender3 V2/Ender3/Ender3 Pro/Ender5/Ender5 Pro/Cr-10 With 32 Bit V 4.2.2(4.2.7) Mainboard.Notice:Just For 32 Bit Motherboard Printers..
Features
- Package Include: CR Touch Auto Bed Leveling Sensor,Capricorn PTFE Teflon Tubing 1M, Aluminum Extruder 4* Premium Metal Bed Springs, 2*PC4-M6 Pneumatic Fittings, 2*PC4-M10 Fittings, 2*0.4mm Nozzle.
- Compatible: This CR Touch fits for Creality Ender3 v2/Ender3/Ender3 Pro/Ender5/Ender5 Pro/CR-10 with 32 bit v 4.2.2(4.2.7) mainboard.Notice:Just for 32 bit motherboard printers.
- Easy firmware installation:Simply download the CR Touch firmware from the Creality Official Website and save the file to your printer s memory card. Insert the card in to your printer. Turn on the printer and wait a few seconds for the firmware to install.
- Enhanced leveling with precision of +/- 0.005mm. This allows for easy leveling with pinpoint accuracy.
- This bundle includes Capricorn PTFE Teflon Tubing which is enhanced with a proprietary blend of high performance additives. It was developed specifically for 1.75mm filament with an extremely precise 1.9mm 0.05mm internal diameter. Reduces the wiggle room, or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems.The aluminum extruder is lightweight and strong, ensuring a more even feed rate over time .
- See more on Amazon...
Brand: Cregrant3D | Manufacturer: Creality
See On Amazon #12
TMYPN 1 Meter Capricorn Bowden Tubing, PTFE Teflon Tube Cutter, 2 Pairs PC4-M6 and PC4-M10 Pneumatic Fittings, 4 Pcs MK8 Nozzles for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5/CR-10/10S 3D Printer
Asin: B0CSN7G6P5
Pc4-M6 And Pc4-M10 Pneumatic Fittings Are Essential For 3D Printer Pneumatic Systems. They Ensure Efficient Filament Feeding And A Smooth Printing Process By Providing Easy And Secure Connections Between Pneumatic Tubes And Extruders..
Package Includes 1 Meter Ptfe Tube, 4*0.4Mm Nozzles, 2*Pc4-M6 Fittings, 2*Pc4-M10 Fittings, And 1* Tube Cutter. If Have Any Problems, Please Feel Free To Contact Us, We Will Provide You With Detailed Solutions Within 24 Hours..
The Ptfe Cutter Is Included In The Kit For Precisely Cutting And Trimming Ptfe Tubing. Clean, Accurate Ends Ensure That The Tubing Can Be Easily Inserted Into Fittings, Preventing Filament Jams..
Mk8 Brass Nozzles With A Diameter Of 0.4Mm. These Nozzles Are Made Of High-Quality Brass Material, Which Ensures Optimal Printing Performance And Precise Extrusion, Suitable For Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5/Cr-10/10S 3D Printer..
Features
- The Capricorn Bowden tube is designed specifically for 1.75mm filament. It has superior heat resistance, which reduces the risk of filament degradation. And the smoother filament flow reduces the drag on the extruder giving a much smoother travel and print quality.
- MK8 brass nozzles with a diameter of 0.4mm. These nozzles are made of high-quality brass material, which ensures optimal printing performance and precise extrusion, suitable for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5/CR-10/10S 3D Printer.
- PC4-M6 and PC4-M10 pneumatic fittings are essential for 3D printer pneumatic systems. They ensure efficient filament feeding and a smooth printing process by providing easy and secure connections between pneumatic tubes and extruders.
- The PTFE cutter is included in the kit for precisely cutting and trimming PTFE tubing. Clean, accurate ends ensure that the tubing can be easily inserted into fittings, preventing filament jams.
- Package Includes 1 Meter PTFE Tube, 4*0.4MM Nozzles, 2*PC4-M6 Fittings, 2*PC4-M10 Fittings, and 1* Tube Cutter. If have any problems, please feel free to contact us, we will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: TMYPN | Manufacturer: TMYPN
See On Amazon #13
Creality 4X Metal Leveling Nuts, 4X Springs, Capricorn Tube for 1.75mm Filament Kit 3D Printer Hot Bed Staying Level Upgraded Accessories for Ender 3 V2/Ender 3/Ender 3 Neo/Ender 3 V2 Neo/Ender 5 Plus
Asin: B08B83VJMD
4* Ender 3 V2 Springs Upgrade: Those Ender 3 Pro Springs Are Around 25Mm Long, Which Are Longer Than The Original Ender 3, Ender 3 Pro And Ender 3 V2 Springs. You Need To Use A Tool To Cut It To Be Shorter Or Adjust The Hot Bed To Be Higher To Fit The Springs On Creality Ender 3, Creality Ender 3 Pro, Creality Ender 3 V2..
1* Bowden Tube Cutter..
4* M4x35 Screws For Hot Bed. Note: The Length Of Screws Is 35Mm, If Your Printer Hot Bed Screws Are 40Mm, Please Adjust The Hot Bed Lower And Leveling Again To Print..
1*1 Meter Original Capricorn Bowden Tubing With Lowest Friction On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills..
Features
- 4*Upgraded Aluminum Hand Twist Level Nut. These red aluminum nuts are upgraded replacement 3d printer parts for Ender 3/Ender 3 Pro/Ender 3 V2,Ender 3 Neo/Ender 3 V2 Neo/Ender 3 Max Neo/ Ender 5 Plus/ Ender 5 Pro, CR-10 Smart, CR 10 V3, CR-10 Mini
- 1*1 Meter Original Capricorn Bowden tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
- 4* Ender 3 V2 Springs Upgrade: Those ender 3 pro springs are around 25mm long, which are longer than the original ender 3, ender 3 pro and ender 3 v2 springs. You need to use a tool to cut it to be shorter or adjust the hot bed to be higher to fit the springs on creality ender 3, creality ender 3 pro, creality ender 3 v2.
- 4* M4X35 screws for hot bed. NOTE: the length of screws is 35mm, if your printer hot bed screws are 40mm, please adjust the hot bed lower and leveling again to print.
- 1* Bowden tube cutter.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #14
Skouphy Creality Upgrade 3D Printer Kit with Capricorn Premium XS Bowden Tubing 1M, 4 PCS Aluminum Hand Twist Leveling Nut, Aluminum Ender 3 Extruder and 4 PCS Hot Bed Die Springs for Ender 3/3 Pro
Asin: B08L3HB4L6 | Model: Creality 3D Printer Kit | PartNumber: Creality 3D Printer Kit | Ean: 0789430974869 | UPC: 789430974869
Upgraded Aluminum Hand Twist Level Nut. These Red Aluminum Nuts Are Original Upgraded Replacement Part For Ender 3/3 Pro/3 X, Ender 5/5 Plus/ 5 Pro, Cr-10, Cr-10 V2, Cr-10 Max, Cr 10, Cr-10 Mini, Cr-10S, Cr 10S Pro,Cr-10 Plus, Cr-X, Cr 20.
Professional Customer Support - If You Have Any Problem Or Question For Our Product,Please Feel Free To Contact Us. We Will Respond Within 24 Hours And Offer Professional Technical Support To You..
2 Kit 4* Bed-Level Springs For Stiff And Accurate Bed Leveling. Note: The 8*20Mm Are For The Ender Series 3D Printer, The 8*25Mm Are For The Cr Series 3D Printer. You Can Choose Whatever You Like..
The Aluminum Extruder Is Lightweight And Strong, Ensuring A More Even Feed Rate Over Time As Well As Resisting Wear Much Better Than The Stock 3D Printers Plastic Extruders Today. The Full Installation Kit For The Extruder Is Included And It Is Very Easy And Straightforward To Switch To This Upgraded Part On Your Machine..
Features
- 1*1 Meter Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
- The aluminum extruder is lightweight and strong, ensuring a more even feed rate over time as well as resisting wear much better than the stock 3D printers plastic extruders today. The full installation kit for the extruder is included and it is very easy and straightforward to switch to this upgraded part on your machine.
- Upgraded Aluminum Hand Twist Level Nut. These red aluminum nuts are original upgraded replacement part for Ender 3/3 Pro/3 X, Ender 5/5 Plus/ 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR 10, CR-10 Mini, CR-10S, CR 10S Pro,CR-10 Plus, CR-X, CR 20
- 2 Kit 4* bed-level springs for stiff and accurate bed leveling. NOTE: The 8*20mm are for the Ender Series 3d printer, the 8*25mm are for the CR series 3d printer. You can choose whatever you like.
- Professional Customer Support - If you have any problem or question for our product,please feel free to contact us. We will respond within 24 hours and offer professional technical support to you.
- See more on Amazon...
Brand: Skouphy | Manufacturer: Skophy
See On Amazon #15
Creality Capricorn Bowden PTFE Tubing Tube XS Series 1 Meter 1.75MM Filament with PTFE Teflon Tube Cutter for Ender 3 Ender 3 Pro, Ender 5, Ender 5 Plus CR-10,CR-10V2 3D Printer
Asin: B07VD62BV4 | Model: Creality Capricorn XS Series 1M | PartNumber: Creality Capricorn XS Series 1M | Ean: 0649910376937 | UPC: 649910376937
Lower Retraction Means Time Saved Every Time The Extruder Retracts. Over The Course Of A Print, A Few Milliseconds Here And A Few There Add Up To A Lot Of Time Saved..
High Temperature Resistance Due To Using Only The Highest Quality Ptfe. Our Xs Tubing Will Operate At Even Higher Temperatures Than Our Tl..
1.9Mm ± 0.05Mm Inner Diameter Reduces The "Wiggle Room," Or Buckling, Inside The Tube, Allowing You To Print Flexible Filaments Even On The Longest Bowden Systems..
High Lubricity Additives Make Our Xs Series Tubing The Lowest Friction Bowden Tubing On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills..
Features
- 100% Original Capricorn XS Serious tubing Original.
- High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
- Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved.
- 1.9mm 0.05mm Inner Diameter Reduces the wiggle room, or buckling, inside the tube, allowing you to print flexible filaments even on the longest Bowden systems.
- High Temperature Resistance due to using only the highest quality PTFE. Our XS tubing will operate at even higher temperatures than our TL.
- See more on Amazon...
Brand: Skouphy | Manufacturer: Skophy
See On Amazon #16
Creality Official Capricorn Bowden PTFE Tubing 1.75mm 1 Meter 3D Printer Accessories Kit and 4PCS Bed-Level Spring for Ender 3/3 V2/3 Pro/5/5 S1 Ender 3 Neo/3 V2 Neo/3 Max Neo K1/K1 Max/K1C 3D Printer
Asin: B09WDGYJD7
👍【Great Value Spare Parts】4Pcs Upgraded Bed-Level Springs Are Made Of High-Quality Spring Steel, Fatigue And Heat-Resistant, Durable For Use. It Is Harder And More Stable Than Ordinary Springs. One Ptfe Cutter With An Extra Sharp Razor Is Also Included To Ensure That The Tube Is Cut Flat On Both Sides..
👍【After Sales Support】More Than 20 Engineers Provide 24/7 Customer Service With 12-Months Limited And Lifetime Technical Assistance. Please Kindly Contact Us(Seller) Via “Ask A Question” Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
⭕【Easy To Install】Diy Kit And You Need To Assemble By Yourself. It Is Very Easy And Straightforward To Switch To This Upgraded Part On Your Machine. (Note: The Springs Are Around 25Mm Long, Which Is Longer Than Ender 3/Ender 3 Pro/Ender 3 V2 Springs. You May Use A Tool To Cut It To Be Shorter If You Need It Or Adjust The Hotbed To Be Higher To Fit The Springs.).
🆗【Original Capricorn Ptfe Tube】Capricorn Ptfe Is Well Regarded As The Highest Quality Ptfe Tubing In All 3D Printing, With The Lowest Friction On The Market. The Capricorn Bowden Xs Tube Can Make Your Extruder Less Abrasion, Durable, Less Clogging, More Accurate Printing, And High-Quality!.
Features
- Quality Assurance Creality 3D 100% official Capricorn PTFE tube kit for Ender 3, Ender 3 Pro, Ender 3V2, Ender 3 Max, Ender 5 Plus, Ender 5 Pro, Ender 5 S1, CR-10 Serie K1/K1 Max/K1C. Capricorn is far superior to the white PTFE tube that comes with any 3D printer. It makes the process of feeding silk more smoothly. And when printing, it reduces the resistance on the extruder, so that the stroke and print quality are smoother. And high-temperature resistance up to 300 .
- Original Capricorn PTFE Tube Capricorn PTFE is well regarded as the highest quality PTFE tubing in all 3D printing, with the lowest friction on the market. The Capricorn Bowden xs tube can make your extruder less abrasion, durable, less clogging, more accurate printing, and high-quality!
- Great Value Spare Parts 4pcs Upgraded bed-level springs are made of high-quality spring steel, fatigue and heat-resistant, durable for use. It is harder and more stable than ordinary springs. One PTFE cutter with an extra sharp razor is also included to ensure that the tube is cut flat on both sides.
- Easy To Install DIY kit and you need to assemble by yourself. It is very easy and straightforward to switch to this upgraded part on your machine. (NOTE: The springs are around 25mm long, which is longer than ender 3/ender 3 pro/ender 3 V2 springs. You may use a tool to cut it to be shorter if you need it or adjust the hotbed to be higher to fit the springs.)
- After Sales Support More than 20 engineers provide 24/7 customer service with 12-months limited and lifetime technical assistance. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #17
Creality Official CR Touch Auto Bed Leveling Kit Upgrade Metal Probe Pin 0.04mm High Precision Self Level Sensor for Ender 3 Pro V2, Ender 5/Pro, CR10, Ender 3 MAX 3D Printers, Better Than BL Touch
Asin: B098QT5MXY | Ean: 0705300792104 | UPC: 705300792104
【High-Precision Electromagnetic Components + Photoelectric Sensor】After The Electromagnetic Component Is Powered On,The Probe Is Extended Under Suction. When The Probe Touches The Printing Platform, The Photoelectric Sensor On The Pcb Board Detects The Contact Signal, And The System Records The Current Height Of The Platform..
【Wide Compatibility】Equipped With A Variety Of Brackets,Compatible For Creality Ender 3, Ender 3S, Ender 3 Pro ,Ender 3 V2, Ender 3 Max, Cr-10, Ender 5, Ender 5S, Ender 5 Pro With 32 Bit Mother Board(4.2.2 / 4.2.7). 【If Your Mother Board Is 8 Bit, You Need To Purchase The 8 Bit Cr Touch Tranfer Kit】.
【Multi-Point Detection，Smart Compensation】Compared With The Traditional Automatic Leveling, It Is Compatible With More 3D Printer Platforms, More Stable And Cost-Effective..
【More Durable Metal Probes】 Cr Touch Is Upgraded To A Metal Probe, Which Reduces Wear And Tear And Greatly Prolongs Its Service Life.It Can Be Reused For More Than 100000 Times..
Features
- Independent research and development,Stable function CR Touch Leveling Kit is a Creality 3D self-developed 3D printer platform leveling solution based on hundreds of millions of users' data used by the creators.
- More durable metal probes CR Touch is upgraded to a metal probe, which reduces wear and tear and greatly prolongs its service life.It can be reused for more than 100000 times.
- High-precision electromagnetic components + Photoelectric sensor After the electromagnetic component is powered on,the probe is extended under suction. When the probe touches the printing platform, the photoelectric sensor on the PCB board detects the contact signal, and the system records the current height of the platform.
- Multi-point detection Smart compensation Compared with the traditional automatic leveling, it is compatible with more 3D printer platforms, more stable and cost-effective.
- Wide compatibility Equipped with a variety of brackets,compatible for creality Ender 3, Ender 3S, Ender 3 Pro ,Ender 3 V2, Ender 3 Max, CR-10, Ender 5, Ender 5S, Ender 5 Pro with 32 bit mother board(4.2.2 / 4.2.7). If your mother board is 8 bit, you need to purchase the 8 bit CR TOUCH tranfer kit
- See more on Amazon...
Brand: ENOMAKER | Manufacturer: ENOMAKER
Weight: 0.00 pounds
See On Amazon #18
ENOMAKER Creality Ender 3 V3 SE/KE Filament Runout Sensor Smart Filament Break Detector, Upgrades Feeding Detection for Ender 3 V3 SE and KE 3D Printer
Asin: B0CT7W13XL | Model: Ender 3 V3 SE/KE Filament Runout Sensor | PartNumber: Ender 3 V3 SE/KE Filament Runout Sensor
【Smooth Filament Travel】The Filament Sensor Equipped With A Metal Filament Guider, The Sensor Ensures Smooth Filament Feed-In By Reducing Friction Resistance, Resulting In Consistent And Reliable Printing Results..
【Simple Installation And Structure】 Easy To Install And Use, With A Straightforward Design That Seamlessly Integrates With Ender 3 V3 Se And Ender 3 V3 Ke 3D Printers..
【Automatic Filament Detection】The Sensor Features A Sensitive Mechanism That Automatically Pauses Printing When Filament Is Running Out Or Breaks, Ensuring Smooth And Continuous Operation..
【Precise Filament Monitoring】 The Blue Led Indicator Provides Clear Feedback On Filament Status, With The Blue Light On To Indicate Normal Feed-In And Turning Off When Filament Runs Out..
Features
- Ender 3 V3 SE/KE Filament Runout Sensor Utilizing advanced technology to automatically detect filament status, such as runout and breaks, enhancing the printing experience.
- Precise Filament Monitoring The blue LED indicator provides clear feedback on filament status, with the blue light on to indicate normal feed-in and turning off when filament runs out.
- Smooth Filament Travel The filament sensor equipped with a metal filament guider, the sensor ensures smooth filament feed-in by reducing friction resistance, resulting in consistent and reliable printing results.
- Automatic Filament Detection The sensor features a sensitive mechanism that automatically pauses printing when filament is running out or breaks, ensuring smooth and continuous operation.
- Simple Installation and Structure Easy to install and use, with a straightforward design that seamlessly integrates with Ender 3 V3 SE and Ender 3 V3 KE 3D printers.
- See more on Amazon...
Brand: ENOMAKER | Manufacturer: ENOMAKER
See On Amazon #19
Creality 2 Meters PTFE Bowden Tube with 1PCS PC4-M6 Fittings and 1PCS PC4-01 Fittings for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max/Ender 5/5Pro/ CR-10/CR-10S,S4,S5
Asin: B07KXL8BFS | Model: CR-Teflon | PartNumber: CR-Teflon | Ean: 0667797511753 | UPC: 667797511753
Temperature Range: -190 - 260C.
If You Have Any Problem Or Question,Please Feel Free To Contact Us.
Notice:These 3D Printer Accessories Are Small Parts. Please Keep Them Away From Children To Avoid Swallow Risk..
Ptfe Tube As Used For Feeding 1.75Mm Filament In Many 3D Printers..
Features
- Material: PTFE (Poly Tetra Fluoro Ethylene)
- PTFE Tube as used for feeding 1.75mm filament in many 3D Printers.
- Temperature Range: -190 - 260C
- Notice:These 3D printer accessories are small parts. Please keep them away from children to avoid swallow risk.
- If you have any problem or question,please feel free to contact us
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Weight: 0.22 pounds
See On Amazon
Looking For Something Else?
Search