Class A Customs EPDM Kit | 9.5ft Wide X 5ft Long | RV Rubber Roof Kit | RV Camper Trailer Rubber Roof Repair | Membrane Glue and Caulk
Asin: B0BGTM8L9R | Model: CACEPDM95X05K | PartNumber: CACEPDM95X05K
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Kit Includes 2 Rolls Of Putty Tape (1/8" Thick X 3/4" W X 30' L) Non-Hardening, Pliable Putty Tape. - Color Gray.
Membrane Ships Folded Depending On Size Of Kit You Will Get One Or Two Boxes (Glue / Membrane) - Remove Membrane From Box As Soon As Possible Onto Clean Roof Of Unit. Do Not Allow Membrane To Touch Ground Or Dirty Surface Do Not Allow Membrane To Touch Sharp Objects Or Surfaces Membrane May Be Installed With Either Side Facing The Glue. Best When Installed In Air Temperatures Over 50 Deg F (10 Deg C) Classacustoms Adhesive Is A Fast Drying Water Based Acrylic Adhesive.
Kit Includes 1 Gallons Of Classacustoms Acrylic Water Based Adhesive - Color White - Coverage 160-200 Sq Ft/Gal (1Side @ 8-10 Mil) - May Be Applied By Spray, Roll Coating, Or By Brush..
Kit Includes 2 Tubes Of Classacustoms Self-Leveling Silicone Caulk (See Additional Photo).
Features
- 5 Foot Long by 9.5 Foot Wide classAcustoms Single-Ply EPDM RV Roofing Membrane Kit - classAcustoms EPDM Membrane is 32 mils / 0.8mm thick Smooth & Textured/Patterned Sides - Color is White throughout - It is recommended to get a length that is longer / wider than your unit due to possible curve of the roof, raised or lowered areas, removing the excess is much better than not having enough
- KIT INCLUDES 2 tubes of classAcustoms Self-Leveling Silicone Caulk (SEE ADDITIONAL PHOTO)
- KIT INCLUDES 2 Rolls of Putty Tape (1/8 Thick x 3/4 W x 30' L) Non-hardening, pliable putty tape. - COLOR Gray
- KIT INCLUDES 1 Gallons of classAcustoms Acrylic Water Based Adhesive - COLOR White - COVERAGE 160-200 sq ft/gal (1side @ 8-10 mil) - May be applied by spray, roll coating, or by brush.
- MEMBRANE SHIPS FOLDED Depending on size of kit you will get one or two boxes (glue / membrane) - Remove membrane from box as soon as possible onto clean roof of unit. DO NOT allow membrane to touch ground or dirty surface DO NOT allow membrane to touch sharp objects or surfaces Membrane may be installed with either side facing the glue. Best when installed in air temperatures over 50 deg F (10 deg C) classAcustoms Adhesive is a fast drying Water Based Acrylic Adhesive
- See more on Amazon...
Brand: classAcustoms | Manufacturer: classacustoms.com
Warranty: 10 years from date of purchase against any manufacturer defects
See On Amazon Similar To Class A Customs EPDM Kit
#1
Gates 20338 Molded Coolant Hose
Asin: B000C2WBFI | Model: 20338 | PartNumber: 20338 | Ean: 0072053050899 | UPC: 072053050899
Pre-Shaped To Fit And To Ensure Perfectly Sealed Conditions.
Meets Requirements Of Sae 20R4, Class D2 And Din 73411, Class A (Except For Tolerances).
Centerline Length (Mm): 124. Hose Inside Diameter (Mm): 15..
Epdm Tube; Synthetic Fiber Knit Reinforcement; Heat-, Ozone- And Chemical Coolant-Resistant Epdm Cover.
Engineered To Resist Electrochemical Degradation, The Leading Cause Of Hose Failure.
Features
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Centerline Length (mm): 124. Hose Inside Diameter (mm): 15.
- See more on Amazon...
Brand: Gates | Manufacturer: Gates
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 1.20 Pounds
Warranty: Please contact retailer/seller for assistance
See On Amazon #2
Osilly 4 Pcs 6.5" Foam Speaker Enhancer, Car Door Foam Speaker Rings Blocker, Self Adhesive Soundproof Sponge Kit, Bass Blocker Pad with High Rebound for Stereo Audio Speaker
Asin: B0CKX8TKGT | Model: Osilly-Blocker | PartNumber: Osilly-Blocker
【Easy To Use】: Our Car Speaker Foam Rings Are Open Cell Foam. They Are Made Of Imported Material Double-Sided Adhesive, Very Easy To Paste. Simple Installation And Use. Just Peel Off The 3M Adhesive Film, And Stick It On Your Stereo Audio Speaker. Unique Adhesive, Strong Adhesion..
【Buy With Confidence】: The Product Has Passed The Gb8410 Flame Retardant Test, And The Design Of Full-Open Cell Foam Can Effectively Drain The Water, Inhibit The Bad Situation Of Winter Icing And Summer Corrosion, And Ensure That The Product Is Long-Lasting And Durable..
【Extensive Application】: Foam Speaker Rings Are Perfect For The Universal 6.5" Speakers Which Are Suitable For Most Automotive Stereo Audio Speakers..
【Perfect Performance】: The Foam Speaker Enhancer Kit Prevent The Sound Quality From Spreading, Absorbs The Echo From The Car Door, Enhances The Sound Effect Of The Horn, And Strengthens The Sound Effect. It Can Effectively Prevent Noise Transmission, And The Perforation Design Can Effectively Discharge The Infiltrated Water To Ensure Better Sound Quality..
Features
- High-Grade Material : Our foam speaker enhancer is made of high purity EPDM, which can make sure the product is soft and elastic. Make it weather-resistant and stable, not affected by high or low temperature, and its 3M adhesive has long-lasting adhesion, high and low temperature resistance, strong chemical resistance, not easy to fall off.
- Perfect Performance : The foam speaker enhancer kit prevent the sound quality from spreading, absorbs the echo from the car door, enhances the sound effect of the horn, and strengthens the sound effect. It can effectively prevent noise transmission, and the perforation design can effectively discharge the infiltrated water to ensure better sound quality.
- Easy to Use : Our car speaker foam rings are open cell foam. They are made of imported material double-sided adhesive, very easy to paste. Simple installation and use. Just peel off the 3M adhesive film, and stick it on your stereo audio speaker. Unique adhesive, strong adhesion.
- Extensive Application : Foam speaker rings are perfect for the universal 6.5 speakers which are suitable for most automotive stereo audio speakers.
- Buy with Confidence : The product has passed the GB8410 flame retardant test, and the design of full-open cell foam can effectively drain the water, inhibit the bad situation of winter icing and summer corrosion, and ensure that the product is long-lasting and durable.
- See more on Amazon...
Brand: Osilly | Manufacturer: Osilly
Dimensions: 0.30 x 2.50 x 2.50 inches
See On Amazon #3
Class A Customs 9.5 ft TPO RV Rubber Roof Kit | 30 ft Long Complete Roof Kit | Motor Home Roof | Camper Roof | Trailer Rubber Membrane and Glue Roofing Kit
Asin: B01MTO1ZU1 | Model: 1725-ISK-WH | PartNumber: 1725-ISK-WH | Ean: 0808890309728 | UPC: 808890309728
4 Rolls Of Putty Tape (1/8" (Thick) X 3/4" W X 30' L).
**Item Ships Folded In A Box - It Is Recommend That You Remove It From The Box As Soon As You Receive It. Lay It Flat And Allow It To "Relax" For Several Hours Before Installing, This Will Allow The Temporary Creases That May Have Been Caused By Folding To Come Out As The Item "Rests". **.
2 Gallons Of Classacustoms Water Based Acrylic Rubber Roof Adhesive.
5 Tubes Of Heng's Self-Leveling Silicone Caulk (See Additional Photo).
Features
- 30 Feet of classAcustoms TPO Membrane by 9 1/2 feet
- 5 tubes of Heng's Self-Leveling Silicone Caulk (SEE ADDITIONAL PHOTO)
- 4 Rolls of Putty Tape (1/8 (thick) x 3/4 W x 30' L)
- 2 Gallons of classAcustoms Water Based Acrylic Rubber Roof Adhesive
- **ITEM SHIPS folded in a box - it is recommend that you remove it from the box as soon as you receive it. Lay it flat and allow it to relax for several hours before installing, this will allow the temporary creases that may have been caused by folding to come out as the item rests. **
- See more on Amazon...
Brand: classAcustoms | Manufacturer: classacustoms.com
See On Amazon #4
Class A Customs TPO Kit | 8.5ft Wide X 5ft Long | RV Rubber Roof Kit | RV Camper Trailer Rubber Roof Repair
Asin: B07BKRSB2K | Model: CACTPO85X05K | PartNumber: CACTPO85X05K | Ean: 0671065514582, 0753569629716 | UPC: 671065514582, 753569629716
Kit Includes 2 Rolls Of Putty Tape (1/8" Thick X 3/4" W X 30' L) Non-Hardening, Pliable Putty Tape. - Color Gray.
Membrane Ships Folded Depending On Size Of Kit You Will Get One Or Two Boxes (Glue / Membrane) - Remove Membrane From Box As Soon As Possible Onto Clean Roof Of Unit. Do Not Allow Membrane To Touch Ground Or Dirty Surface Do Not Allow Membrane To Touch Sharp Objects Or Surfaces Membrane May Be Installed With Either Side Facing The Glue. Best When Installed In Air Temperatures Over 50 Deg F (10 Deg C) Classacustoms Adhesive Is A Fast Drying Water Based Acrylic Adhesive.
Kit Includes 1 Gallons Of Classacustoms Acrylic Water Based Adhesive - Color White - Coverage 160-200 Sq Ft/Gal (1Side @ 8-10 Mil) - May Be Applied By Spray, Roll Coating, Or By Brush..
Kit Includes 2 Tubes Of Heng's Self-Leveling Silicone Caulk (See Additional Photo).
Features
- 5 Foot Long by 8.5 Foot Wide classAcustoms Single-Ply TPO RV Roofing Membrane Kit - classAcustoms TPO Membrane is 32 mils thick Smooth & Frosted Sides - Color is White - It is recommended to get a length that is longer / wider than your unit due to possible curve of the roof, raised or lowered areas, removing the excess is much better than not having enough
- KIT INCLUDES 2 tubes of Heng's Self-Leveling Silicone Caulk (SEE ADDITIONAL PHOTO)
- KIT INCLUDES 2 Rolls of Putty Tape (1/8 Thick x 3/4 W x 30' L) Non-hardening, pliable putty tape. - COLOR Gray
- KIT INCLUDES 1 Gallons of classAcustoms Acrylic Water Based Adhesive - COLOR White - COVERAGE 160-200 sq ft/gal (1side @ 8-10 mil) - May be applied by spray, roll coating, or by brush.
- MEMBRANE SHIPS FOLDED Depending on size of kit you will get one or two boxes (glue / membrane) - Remove membrane from box as soon as possible onto clean roof of unit. DO NOT allow membrane to touch ground or dirty surface DO NOT allow membrane to touch sharp objects or surfaces Membrane may be installed with either side facing the glue. Best when installed in air temperatures over 50 deg F (10 deg C) classAcustoms Adhesive is a fast drying Water Based Acrylic Adhesive
- See more on Amazon...
Brand: classAcustoms | Manufacturer: classacustoms.com
See On Amazon #5
Class A Customs EPDM Kit | 8.5 ft Wide X 10 ft Long | RV Rubber Roof Kit | RV Camper Trailer Rubber Roof Repair | Membrane Glue and Caulk
Asin: B0BGSYXZM7 | Model: CACEPDM85X10K | PartNumber: CACEPDM85X10K
Kit Includes 2 Rolls Of Putty Tape (1/8" Thick X 3/4" W X 30' L) Non-Hardening, Pliable Putty Tape. - Color Gray.
**Item Ships Folding In A Box - It Is Recommend That You Remove It From The Box As Soon As You Receive It. Lay It Flat And Allow It To "Relax" For Several Hours Before Installing, This Will Allow The Temporary Creases That May Have Been Caused By Folding To Come Out As The Item "Rests". **.
1 Gallon Of Acrylic Rubber Roof Adhesive (Water Based)).
4 Tubes Of Classacustoms Self-Leveling Silicone Caulk (See Additional Photo).
Features
- 10 Foot Long by 8.5 Foot Wide classAcustoms Single-Ply EPDM RV Roofing Membrane Kit - classAcustoms EPDM Membrane is 32 mils / 0.8mm thick Smooth & Textured/Patterned Sides - Color is White throughout - It is recommended to get a length that is longer / wider than your unit due to possible curve of the roof, raised or lowered areas, removing the excess is much better than not having enough
- 4 Tubes of classAcustoms Self-Leveling Silicone Caulk (SEE ADDITIONAL PHOTO)
- KIT INCLUDES 2 Rolls of Putty Tape (1/8 Thick x 3/4 W x 30' L) Non-hardening, pliable putty tape. - COLOR Gray
- 1 Gallon of Acrylic Rubber Roof Adhesive (Water Based))
- **ITEM SHIPS folding in a box - it is recommend that you remove it from the box as soon as you receive it. Lay it flat and allow it to relax for several hours before installing, this will allow the temporary creases that may have been caused by folding to come out as the item rests. **
- See more on Amazon...
Brand: classAcustoms | Manufacturer: classacustoms.com
Warranty: 10 years from date of purchase against any manufacturer defects
See On Amazon #6
Class A Customs EPDM Kit | 8.5 ft Wide X 15 ft Long | RV Rubber Roof Kit | RV Camper Trailer Rubber Roof Repair | Membrane Glue and Caulk
Asin: B0BGT8ND33 | Model: CACEPDM85X15K | PartNumber: CACEPDM85X15K
Kit Includes 2 Rolls Of Putty Tape (1/8" Thick X 3/4" W X 30' L) Non-Hardening, Pliable Putty Tape. - Color Gray.
**Item Ships Folding In A Box - It Is Recommend That You Remove It From The Box As Soon As You Receive It. Lay It Flat And Allow It To "Relax" For Several Hours Before Installing, This Will Allow The Temporary Creases That May Have Been Caused By Folding To Come Out As The Item "Rests". **.
1 Gallon Of Acrylic Rubber Roof Adhesive (Water Based)).
4 Tubes Of Classacustoms Self-Leveling Silicone Caulk (See Additional Photo).
Features
- 15 Foot Long by 8.5 Foot Wide classAcustoms Single-Ply EPDM RV Roofing Membrane Kit - classAcustoms EPDM Membrane is 32 mils / 0.8mm thick Smooth & Textured/Patterned Sides - Color is White throughout - It is recommended to get a length that is longer / wider than your unit due to possible curve of the roof, raised or lowered areas, removing the excess is much better than not having enough
- 4 Tubes of classAcustoms Self-Leveling Silicone Caulk (SEE ADDITIONAL PHOTO)
- KIT INCLUDES 2 Rolls of Putty Tape (1/8 Thick x 3/4 W x 30' L) Non-hardening, pliable putty tape. - COLOR Gray
- 1 Gallon of Acrylic Rubber Roof Adhesive (Water Based))
- **ITEM SHIPS folding in a box - it is recommend that you remove it from the box as soon as you receive it. Lay it flat and allow it to relax for several hours before installing, this will allow the temporary creases that may have been caused by folding to come out as the item rests. **
- See more on Amazon...
Brand: classAcustoms | Manufacturer: classacustoms.com
Warranty: 10 years from date of purchase against any manufacturer defects
See On Amazon #7
Gates 20923 Premium Molded Coolant Hose
Asin: B000C2S9N6 | Model: 20923 | PartNumber: 20923 | Ean: 0072053053920 | UPC: 072053053920
Pre-Shaped To Fit And To Ensure Perfectly Sealed Conditions.
Meets Requirements Of Sae 20R4, Class D2 And Din 73411, Class A (Except For Tolerances).
Epdm Tube; Synthetic Fiber Knit Reinforcement; Heat-, Ozone- And Chemical Coolant-Resistant Epdm Cover.
Engineered To Resist Electrochemical Degradation, The Leading Cause Of Hose Failure.
Features
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- See more on Amazon...
Brand: Gates | Manufacturer: Gates
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.60 pounds
Warranty: Please contact retailer/seller for assistance
See On Amazon #8
ACDelco Gold 18E1330 (19175859) Rear Drum Brake Wheel Cylinder
Asin: B001DRN9HU | Model: 18E1330 | PartNumber: 18E1330 | Ean: 0707773310915 | UPC: 707773310915
Trivalent Coated Bleeder Screws Provide Extra Protection And Added Durability.
Trivalent Coated Bleeder Screws Provide Extra Protection And Added Durability.
Cast Iron And Aluminum Specifications; No Extra Stress On The Brake Boosting Mounting.
Meets The Brake Performance Requirements Of Sae J1153 And J1154 Testing, Providing Reliability And Quality.
Pressure Tested To Ensure Safe And Confident Braking.
Cast Iron And Aluminum Specifications; No Extra Stress On The Brake Boosting Mounting.
Pressure Tested To Ensure Safe And Confident Braking.
Features
- Meets the brake performance requirements of SAE J1153 and J1154 testing, providing reliability and quality
- Pressure tested to ensure safe and confident braking
- Trivalent coated bleeder screws provide extra protection and added durability
- Cast iron and aluminum specifications; no extra stress on the brake boosting mounting
- Meets the brake performance requirements of SAE J1153 and J1154 testing, providing reliability and quality
- Pressure tested to ensure safe and confident braking
- Trivalent coated bleeder screws provide extra protection and added durability
- Cast iron and aluminum specifications; no extra stress on the brake boosting mounting
- See more on Amazon...
Brand: ACDelco | Manufacturer: ACDelco
Dimensions: 2.30 x 4.00 x 3.10 inches | Weight: 1.20 Pounds
Warranty: 24 Month / Unlimited Mile Limited Warranty on parts sold on or after 04/01/18. (Parts Only) Please see ACDelco.com for more details.
See On Amazon #9
Class A Customs EPDM Kit | 8.5ft Wide X 5ft Long | RV Rubber Roof Kit | RV Camper Trailer Rubber Roof Repair | Membrane Glue and Caulk
Asin: B0BGSY88BG | Model: CACTPO85X05K | PartNumber: CACTPO85X05K
Kit Includes 2 Rolls Of Putty Tape (1/8" Thick X 3/4" W X 30' L) Non-Hardening, Pliable Putty Tape. - Color Gray.
Membrane Ships Folded Depending On Size Of Kit You Will Get One Or Two Boxes (Glue / Membrane) - Remove Membrane From Box As Soon As Possible Onto Clean Roof Of Unit. Do Not Allow Membrane To Touch Ground Or Dirty Surface Do Not Allow Membrane To Touch Sharp Objects Or Surfaces Membrane May Be Installed With Either Side Facing The Glue. Best When Installed In Air Temperatures Over 50 Deg F (10 Deg C) Classacustoms Adhesive Is A Fast Drying Water Based Acrylic Adhesive.
Kit Includes 1 Gallons Of Classacustoms Acrylic Water Based Adhesive - Color White - Coverage 160-200 Sq Ft/Gal (1Side @ 8-10 Mil) - May Be Applied By Spray, Roll Coating, Or By Brush..
Kit Includes 2 Tubes Of Classacustoms Self-Leveling Silicone Caulk (See Additional Photo).
Features
- 5 Foot Long by 8.5 Foot Wide classAcustoms Single-Ply EPDM RV Roofing Membrane Kit - classAcustoms EPDM Membrane is 32 mils / 0.8mm thick Smooth & Textured/Patterned Sides - Color is White throughout - It is recommended to get a length that is longer / wider than your unit due to possible curve of the roof, raised or lowered areas, removing the excess is much better than not having enough
- KIT INCLUDES 2 tubes of classAcustoms Self-Leveling Silicone Caulk (SEE ADDITIONAL PHOTO)
- KIT INCLUDES 2 Rolls of Putty Tape (1/8 Thick x 3/4 W x 30' L) Non-hardening, pliable putty tape. - COLOR Gray
- KIT INCLUDES 1 Gallons of classAcustoms Acrylic Water Based Adhesive - COLOR White - COVERAGE 160-200 sq ft/gal (1side @ 8-10 mil) - May be applied by spray, roll coating, or by brush.
- MEMBRANE SHIPS FOLDED Depending on size of kit you will get one or two boxes (glue / membrane) - Remove membrane from box as soon as possible onto clean roof of unit. DO NOT allow membrane to touch ground or dirty surface DO NOT allow membrane to touch sharp objects or surfaces Membrane may be installed with either side facing the glue. Best when installed in air temperatures over 50 deg F (10 deg C) classAcustoms Adhesive is a fast drying Water Based Acrylic Adhesive
- See more on Amazon...
Brand: classAcustoms | Manufacturer: classacustoms.com
Warranty: 10 years from date of purchase against any manufacturer defects
See On Amazon #10
Gates 20763 Premium Molded Coolant Hose
Asin: B000C2S9FY | Model: 20763 | PartNumber: 20763 | Ean: 0072053052848 | UPC: 072053052848
Pre-Shaped To Fit And To Ensure Perfectly Sealed Conditions.
Meets Requirements Of Sae 20R4, Class D2 And Din 73411, Class A (Except For Tolerances).
Epdm Tube; Synthetic Fiber Knit Reinforcement; Heat-, Ozone- And Chemical Coolant-Resistant Epdm Cover.
Engineered To Resist Electrochemical Degradation, The Leading Cause Of Hose Failure.
Features
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- See more on Amazon...
Brand: Gates | Manufacturer: Gates
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.85 pounds
Warranty: Please contact retailer/seller for assistance
See On Amazon #11
Class A Customs EPDM Kit | 8.5 ft Wide X 20 ft Long | RV Rubber Roof Kit | RV Camper Trailer Rubber Roof Repair | Membrane Glue and Caulk
Asin: B0BGTFSTD3 | Model: CACEPDM85X12K | PartNumber: CACEPDM85X12K
Kit Includes 2 Rolls Of Putty Tape (1/8" Thick X 3/4" W X 30' L) Non-Hardening, Pliable Putty Tape. - Color Gray.
**Item Ships Folding In A Box - It Is Recommend That You Remove It From The Box As Soon As You Receive It. Lay It Flat And Allow It To "Relax" For Several Hours Before Installing, This Will Allow The Temporary Creases That May Have Been Caused By Folding To Come Out As The Item "Rests". **.
1 Gallon Of Acrylic Rubber Roof Adhesive (Water Based)).
4 Tubes Of Classacustoms Self-Leveling Silicone Caulk (See Additional Photo).
Features
- 20 Foot Long by 8.5 Foot Wide classAcustoms Single-Ply EPDM RV Roofing Membrane Kit - classAcustoms EPDM Membrane is 32 mils / 0.8mm thick Smooth & Textured/Patterned Sides - Color is White throughout - It is recommended to get a length that is longer / wider than your unit due to possible curve of the roof, raised or lowered areas, removing the excess is much better than not having enough
- 4 Tubes of classAcustoms Self-Leveling Silicone Caulk (SEE ADDITIONAL PHOTO)
- KIT INCLUDES 2 Rolls of Putty Tape (1/8 Thick x 3/4 W x 30' L) Non-hardening, pliable putty tape. - COLOR Gray
- 1 Gallon of Acrylic Rubber Roof Adhesive (Water Based))
- **ITEM SHIPS folding in a box - it is recommend that you remove it from the box as soon as you receive it. Lay it flat and allow it to relax for several hours before installing, this will allow the temporary creases that may have been caused by folding to come out as the item rests. **
- See more on Amazon...
Brand: classAcustoms | Manufacturer: classacustoms.com
Warranty: 10 years from date of purchase against any manufacturer defects
See On Amazon #12
Gates 20412 Premium Molded Coolant Hose
Asin: B000CRBPH8 | Model: 20412 | PartNumber: 20412 | Ean: 0072053051100 | UPC: 072053051100
Pre-Shaped To Fit And To Ensure Perfectly Sealed Conditions.
Meets Requirements Of Sae 20R4, Class D2 And Din 73411, Class A (Except For Tolerances).
Epdm Tube; Synthetic Fiber Knit Reinforcement; Heat-, Ozone- And Chemical Coolant-Resistant Epdm Cover.
Engineered To Resist Electrochemical Degradation, The Leading Cause Of Hose Failure.
Features
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- See more on Amazon...
Brand: Gates | Manufacturer: Gates
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.65 pounds
Warranty: Please contact retailer/seller for assistance
See On Amazon #13
EZ Lip - Front Splitter MAX Universal Car Bumper Spoiler Foam Rubber Body Kit
Asin: B0BYRL9SXD | Model: 27EZLM | PartNumber: 27EZLM | Ean: 0860009578609 | UPC: 860009578609
Super Fast Installation - Patented 3M Adhesive Design Keeps Installation Quick And Easy. Now You Can Give Your Car A More Aggressive Look In Three Easy Steps: Peel, Stick & Cut..
Made In America – Ez Lip Prides Itself On Offering Products 100% Designed And Manufactured In The Usa. You Can Relax Knowing We Offer The Best Quality Universal-Fit Products..
All Weather Durability – Top Of The Line 3M Adhesive Endures Any Environment It's Put Through. Withstands Any Temperature And High Speeds Or Car Washes..
Double Surface Protection – Patented Design Protects Two Surfaces At The Same Time. Protects The Bottom And Front Of Your Bumper From Everyday Road Damage..
Features
- MAXIMUM DURABILITY & PROTECTION - Front Splitter MAX offers the best in class protection, style and durability for any car or truck.
- DOUBLE SURFACE PROTECTION Patented design protects two surfaces at the same time. Protects the bottom and front of your bumper from everyday road damage.
- SUPER FAST INSTALLATION - Patented 3M adhesive design keeps installation quick and easy. Now you can give your car a more aggressive look in three easy steps: Peel, Stick & Cut.
- ALL WEATHER DURABILITY Top of the line 3M adhesive endures any environment it's put through. Withstands any temperature and high speeds or car washes.
- MADE IN AMERICA EZ Lip prides itself on offering products 100% designed and manufactured in the USA. You can relax knowing we offer the best quality universal-fit products.
- See more on Amazon...
Brand: EZ Lip | Manufacturer: EZ Lip
Warranty: 30 days money-back guarantee
See On Amazon #14
Premium Molded Coolant Hose
Asin: B000C2WBO4 | Model: 20767 | PartNumber: 20767 | Ean: 0072053052879 | UPC: 072053052879
Pre-Shaped To Fit And To Ensure Perfectly Sealed Conditions.
Meets Requirements Of Sae 20R4, Class D2 And Din 73411, Class A (Except For Tolerances).
Epdm Tube; Synthetic Fiber Knit Reinforcement; Heat-, Ozone- And Chemical Coolant-Resistant Epdm Cover.
Engineered To Resist Electrochemical Degradation, The Leading Cause Of Hose Failure.
Features
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- See more on Amazon...
Brand: Gates | Manufacturer: Gates
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 1.00 pounds
Warranty: Please contact retailer/seller for assistance
See On Amazon #15
Class A Customs EPDM Kit | 8.5 ft Wide X 35 ft Long | RV Rubber Roof Kit | RV Camper Trailer Rubber Roof Repair | Membrane Glue and Caulk
Asin: B0BGT13BPR | Model: CACEPDM85X35K | PartNumber: CACEPDM85X35K
Kit Includes 4 Rolls Of Putty Tape (1/8" Thick X 3/4" W X 30' L) Non-Hardening, Pliable Putty Tape. - Color Gray.
**Item Ships Folding In A Box - It Is Recommend That You Remove It From The Box As Soon As You Receive It. Lay It Flat And Allow It To "Relax" For Several Hours Before Installing, This Will Allow The Temporary Creases That May Have Been Caused By Folding To Come Out As The Item "Rests". **.
2 Gallons Of Acrylic Rubber Roof Adhesive (Water Based)).
5 Tubes Of Classacustoms Self-Leveling Silicone Caulk (See Additional Photo).
Features
- 35 Foot Long by 8.5 Foot Wide classAcustoms Single-Ply EPDM RV Roofing Membrane Kit - classAcustoms EPDM Membrane is 32 mils / 0.8mm thick Smooth & Textured/Patterned Sides - Color is White throughout - It is recommended to get a length that is longer / wider than your unit due to possible curve of the roof, raised or lowered areas, removing the excess is much better than not having enough
- 5 Tubes of classAcustoms Self-Leveling Silicone Caulk (SEE ADDITIONAL PHOTO)
- KIT INCLUDES 4 Rolls of Putty Tape (1/8 Thick x 3/4 W x 30' L) Non-hardening, pliable putty tape. - COLOR Gray
- 2 Gallons of Acrylic Rubber Roof Adhesive (Water Based))
- **ITEM SHIPS folding in a box - it is recommend that you remove it from the box as soon as you receive it. Lay it flat and allow it to relax for several hours before installing, this will allow the temporary creases that may have been caused by folding to come out as the item rests. **
- See more on Amazon...
Brand: classAcustoms | Manufacturer: classacustoms.com
Warranty: 10 years from date of purchase against any manufacturer defects
See On Amazon #16
IncStores 8mm Thick Strong Rubber Interlocking Floor Tiles | Flexible Recycled Rubber for a Stronger and Safer Basement, Home Gym, Shed, or Trailer | Grey, 7ft 8in x 9ft 7in
Asin: B00SK71DHO | Ean: 0711508275882 | UPC: 711508275882
Smooth Forgiving Surface: Made For Maximum Versatility, Easy Cleaning, And Seamless Style, 23"X23" Strong Rubber Floor Mat Tiles Use Dedicated Center, Border, And Corner Tiles Create An Even Edge-To-Edge Surface That Allows Equipment To Move Freely..
A Foundation Of Quality: For More Than A Decade, Incstores Has Been Outfitting Every Room In Your Home With High-Quality Interlocking Flooring Tiles In Countless Styles, Because A Stronger, Safer, Smarter Looking Home Starts From The Floor Up..
Transform Demanding Spaces: While The Material Makes Them The Ideal Rubber Mats For Garage Gym Flooring Under Any Weight Bench Or Machine, The Slip Resistance And Expandability Is Handy For Industrial Storage, Horse Stall, And Box Trailer Flooring..
Built To Last: From Toolbox To Treadmill, Spin Class To Deadlift, These Extra Heavy Duty Rubber Mats Offer Completely Waterproof Protection To Help Your Home Handle Weightlifting, Shop Equipment, And Exercise Machines With Plenty Of Grip And Bounce..
Features
- READY FOR ANYTHING: Build a steadfast space in minutes with low-profile rubber flooring for garage floors, basements, and home gyms featuring recycled rubber that s ready to tackle tough indoor and outdoor spaces without being tough to live with.
- BUILT TO LAST: From toolbox to treadmill, spin class to deadlift, these extra heavy duty rubber mats offer completely waterproof protection to help your home handle weightlifting, shop equipment, and exercise machines with plenty of grip and bounce.
- SMOOTH FORGIVING SURFACE: Made for maximum versatility, easy cleaning, and seamless style, 23x23 Strong Rubber floor mat tiles use dedicated center, border, and corner tiles create an even edge-to-edge surface that allows equipment to move freely.
- TRANSFORM DEMANDING SPACES: While the material makes them the ideal rubber mats for garage gym flooring under any weight bench or machine, the slip resistance and expandability is handy for industrial storage, horse stall, and box trailer flooring.
- A FOUNDATION OF QUALITY: For more than a decade, IncStores has been outfitting every room in your home with high-quality interlocking flooring tiles in countless styles, because a stronger, safer, smarter looking home starts from the floor up.
- See more on Amazon...
Brand: IncStores | Manufacturer: IncStores
See On Amazon #17
Gates 20137 Premium Molded Coolant Hose
Asin: B000C2WBBC | Model: 20137 | PartNumber: 20137 | Ean: 0072053050660, 9314693108341 | UPC: 072053050660
Pre-Shaped To Fit And To Ensure Perfectly Sealed Conditions.
Meets Requirements Of Sae 20R4, Class D2 And Din 73411, Class A (Except For Tolerances).
Epdm Tube; Synthetic Fiber Knit Reinforcement; Heat-, Ozone- And Chemical Coolant-Resistant Epdm Cover.
Engineered To Resist Electrochemical Degradation, The Leading Cause Of Hose Failure.
Features
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- See more on Amazon...
Brand: Gates | Manufacturer: Gates
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.59 pounds
Warranty: Please contact retailer/seller for assistance
See On Amazon #18
Gates 20065 Premium Molded Coolant Hose
Asin: B000C2WBEO | Model: 20065 | PartNumber: 20065 | Ean: 0072053050639 | UPC: 072053050639
Pre-Shaped To Fit And To Ensure Perfectly Sealed Conditions.
Meets Requirements Of Sae 20R4, Class D2 And Din 73411, Class A (Except For Tolerances).
Epdm Tube; Synthetic Fiber Knit Reinforcement; Heat-, Ozone- And Chemical Coolant-Resistant Epdm Cover.
Engineered To Resist Electrochemical Degradation, The Leading Cause Of Hose Failure.
Features
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- See more on Amazon...
Brand: Gates | Manufacturer: Gates
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.45 pounds
Warranty: Please contact retailer/seller for assistance
See On Amazon #19
Gates 20687 Hose
Asin: B000C2WBCG | Model: 20687 | PartNumber: 20687 | Ean: 0072053052411 | UPC: 072053052411
Pre-Shaped To Fit And To Ensure Perfectly Sealed Conditions.
Meets Requirements Of Sae 20R4, Class D2 And Din 73411, Class A (Except For Tolerances).
Epdm Tube; Synthetic Fiber Knit Reinforcement; Heat-, Ozone- And Chemical Coolant-Resistant Epdm Cover.
Engineered To Resist Electrochemical Degradation, The Leading Cause Of Hose Failure.
Features
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- See more on Amazon...
Brand: Gates | Manufacturer: Gates
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.75 pounds
Warranty: Please contact retailer/seller for assistance
See On Amazon #20
Gates 20710 Premium Molded Coolant Hose
Asin: B000C2WBMQ | Model: 20710 | PartNumber: 20710 | Ean: 0072053052572 | UPC: 072053052572
Pre-Shaped To Fit And To Ensure Perfectly Sealed Conditions.
Meets Requirements Of Sae 20R4, Class D2 And Din 73411, Class A (Except For Tolerances).
Epdm Tube; Synthetic Fiber Knit Reinforcement; Heat-, Ozone- And Chemical Coolant-Resistant Epdm Cover.
Engineered To Resist Electrochemical Degradation, The Leading Cause Of Hose Failure.
Features
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- See more on Amazon...
Brand: Gates | Manufacturer: Gates
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 1.35 pounds
Warranty: Please contact retailer/seller for assistance
See On Amazon
Looking For Something Else?
Search