Benchmark Tools 106615 6 Rigid Woodworking Ruler with End Grads Black Chrome Finish 1/8th and 1/16th Grads Hardened Stainless Steel
Asin: B0BH7769VK
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Rule Is Finished With A Black Chrome Finish That Provides Scratch And Corrosion Resistance And Maximizes Readability By Achieving A Zero-Glare, High-Contrast, Ez Read Finish That Enhances Readability In Both Low And Bright Light Conditions..
Each Rule Comes In Vinyl Storage Pouch. These Are Well Made Rules And Will Provide Years Of Reliable Service In Any Shop..
Specifications: 6” Long X 3/4” Wide X 0.040” Thick. Rule Has End Graduation Marks On Both Ends Of The Rule..
Our Rules Are Made From Japanese Rust-Resistant Stainless Steel That Has Been Tempered Creating A Ruler That Can Flex If Needed And Snap Back Straight. The Edges And Ends Have Been Ground Parallel, Straight, Smooth And Square. Graduations Are Produced Via A Photoengraving Process Creating Very Consistent And Accurate Markings With Uniform Line Widths. Once Etched, Graduations Are White Filled For Maximal Readability. Graduations Are Etched And Not Printed So Will Not Wear Off With Prolonged Use. Graduations Conform To Strict International Eec 1 Accuracy Standards, I.E. +/- 0.2Mm At 20° C For 1000Mm Ruler. Markings Feature Quick-Reading 1/8Ths And 1/16Ths On Both Sides.
Features
- Every woodworker should own a few precision machinist rulers as they will improve the accuracy of his/her work. Traditionally, the most common graduation markings used by woodworkers are 4R, or 1/8ths and 1/16ths on one side and 1/32nds and 1/64ths on the reverse. The fact is most woodworkers never use the finer 1/32nd and 1/64th markings as they are hard to read, too precise for most tasks, and just plain confusing, e.g., just what does 51/64th or 19/32nds really mean? So, we had rulers made under our Benchmark Tools brand that included the most commonly used 1/8th and 1/16th graduation marks on both sides
- Our rules are made from Japanese rust-resistant stainless steel that has been tempered creating a ruler that can flex if needed and snap back straight. The edges and ends have been ground parallel, straight, smooth and square. Graduations are produced via a photoengraving process creating very consistent and accurate markings with uniform line widths. Once etched, graduations are white filled for maximal readability. Graduations are etched and not printed so will not wear off with prolonged use. Graduations conform to strict international EEC 1 Accuracy Standards, i.e. +/- 0.2mm at 20 C for 1000mm ruler. Markings feature quick-reading 1/8ths and 1/16ths on both sides
- Rule is finished with a black chrome finish that provides scratch and corrosion resistance and maximizes readability by achieving a zero-glare, high-contrast, EZ read finish that enhances readability in both low and bright light conditions.
- Specifications: 6 long x 3/4 wide x 0.040 thick. Rule has end graduation marks on both ends of the rule.
- Each rule comes in vinyl storage pouch. These are well made rules and will provide years of reliable service in any shop.
- See more on Amazon...
Brand: Benchmark Tools | Manufacturer: Taylor Toolworks
Dimensions: 0.04 x 6.00 x 0.75 inches
See On Amazon Similar To Benchmark Tools 106615 6 Rigid
#1
Benchmark Tools 106609 6 Rigid Woodworking Ruler Black Chrome Finish 1/8th and 1/16th Grads Hardened Stainless Steel
Asin: B0BH7CMWP3
Rule Is Finished With A Black Chrome Finish That Provides Scratch And Corrosion Resistance And Maximizes Readability By Achieving A Zero-Glare, High-Contrast, Ez Read Finish That Enhances Readability In Both Low And Bright Light Conditions..
Each Rule Comes In Vinyl Storage Pouch. These Are Well Made Rules And Will Provide Years Of Reliable Service In Any Shop..
Specifications: 6” Long X 3/4” Wide X 0.040” Thick.
Our Rules Are Made From Japanese Rust-Resistant Stainless Steel That Has Been Tempered Creating A Ruler That Can Flex If Needed And Snap Back Straight. The Edges And Ends Have Been Ground Parallel, Straight, Smooth And Square. Graduations Are Produced Via A Photoengraving Process Creating Very Consistent And Accurate Markings With Uniform Line Widths. Once Etched, Graduations Are White Filled For Maximal Readability. Graduations Are Etched And Not Printed So Will Not Wear Off With Prolonged Use. Graduations Conform To Strict International Eec 1 Accuracy Standards, I.E. +/- 0.2Mm At 20° C For 1000Mm Ruler. Markings Feature Quick-Reading 1/8Ths And 1/16Ths On Both Sides.
Features
- Every woodworker should own a few precision machinist rulers as they will improve the accuracy of his/her work. Traditionally, the most common graduation markings used by woodworkers are 4R, or 1/8ths and 1/16ths on one side and 1/32nds and 1/64ths on the reverse. The fact is most woodworkers never use the finer 1/32nd and 1/64th markings as they are hard to read, too precise for most tasks, and just plain confusing, e.g., just what does 51/64th or 19/32nds really mean? So, we had rulers made under our Benchmark Tools brand that included the most commonly used 1/8th and 1/16th graduation marks on both sides
- Our rules are made from Japanese rust-resistant stainless steel that has been tempered creating a ruler that can flex if needed and snap back straight. The edges and ends have been ground parallel, straight, smooth and square. Graduations are produced via a photoengraving process creating very consistent and accurate markings with uniform line widths. Once etched, graduations are white filled for maximal readability. Graduations are etched and not printed so will not wear off with prolonged use. Graduations conform to strict international EEC 1 Accuracy Standards, i.e. +/- 0.2mm at 20 C for 1000mm ruler. Markings feature quick-reading 1/8ths and 1/16ths on both sides
- Rule is finished with a black chrome finish that provides scratch and corrosion resistance and maximizes readability by achieving a zero-glare, high-contrast, EZ read finish that enhances readability in both low and bright light conditions.
- Specifications: 6 long x 3/4 wide x 0.040 thick
- Each rule comes in vinyl storage pouch. These are well made rules and will provide years of reliable service in any shop.
- See more on Amazon...
Brand: Benchmark Tools | Manufacturer: Taylor Toolworks
Dimensions: 0.04 x 6.00 x 0.75 inches
See On Amazon #2
Benchmark Tools 106611 6 Flexible Woodworking Ruler Black Chrome Finish 1/8th and 1/16th Grads Hardened Stainless Steel
Asin: B0BH7SK3SV | Ean: 0796029774229 | UPC: 796029774229
Rule Is Finished With A Black Chrome Finish That Provides Scratch And Corrosion Resistance And Maximizes Readability By Achieving A Zero-Glare, High-Contrast, Ez Read Finish That Enhances Readability In Both Low And Bright Light Conditions..
Each Rule Comes In Vinyl Storage Pouch. These Are Well Made Rules And Will Provide Years Of Reliable Service In Any Shop..
Specifications: 6” Long X 1/2” Wide X 0.020” Thick.
Our Rules Are Made From Japanese Rust-Resistant Stainless Steel That Has Been Tempered Creating A Ruler That Can Flex If Needed And Snap Back Straight. The Edges And Ends Have Been Ground Parallel, Straight, Smooth And Square. Graduations Are Produced Via A Photoengraving Process Creating Very Consistent And Accurate Markings With Uniform Line Widths. Once Etched, Graduations Are White Filled For Maximal Readability. Graduations Are Etched And Not Printed So Will Not Wear Off With Prolonged Use. Graduations Conform To Strict International Eec 1 Accuracy Standards, I.E. +/- 0.2Mm At 20° C For 1000Mm Ruler. Markings Feature Quick-Reading 1/8Ths And 1/16Ths On Both Sides.
Features
- Every woodworker should own a few precision machinist rulers as they will improve the accuracy of his/her work. Traditionally, the most common graduation markings used by woodworkers are 4R, or 1/8ths and 1/16ths on one side and 1/32nds and 1/64ths on the reverse. The fact is most woodworkers never use the finer 1/32nd and 1/64th markings as they are hard to read, too precise for most tasks, and just plain confusing, e.g., just what does 51/64th or 19/32nds really mean? So, we had rulers made under our Benchmark Tools brand that included the most commonly used 1/8th and 1/16th graduation marks on both sides
- Our rules are made from Japanese rust-resistant stainless steel that has been tempered creating a ruler that can flex if needed and snap back straight. The edges and ends have been ground parallel, straight, smooth and square. Graduations are produced via a photoengraving process creating very consistent and accurate markings with uniform line widths. Once etched, graduations are white filled for maximal readability. Graduations are etched and not printed so will not wear off with prolonged use. Graduations conform to strict international EEC 1 Accuracy Standards, i.e. +/- 0.2mm at 20 C for 1000mm ruler. Markings feature quick-reading 1/8ths and 1/16ths on both sides
- Rule is finished with a black chrome finish that provides scratch and corrosion resistance and maximizes readability by achieving a zero-glare, high-contrast, EZ read finish that enhances readability in both low and bright light conditions.
- Specifications: 6 long x 1/2 wide x 0.020 thick
- Each rule comes in vinyl storage pouch. These are well made rules and will provide years of reliable service in any shop.
- See more on Amazon...
Brand: Benchmark Tools | Manufacturer: Taylor Toolworks
Dimensions: 0.04 x 6.00 x 0.75 inches
See On Amazon #3
Benchmark Tools 106610 6 Rigid Woodworking Ruler Satin Chrome Finish 1/8th and 1/16th Grads Hardened Stainless Steel
Asin: B0BH76ZBQ4
Rule Is Finished With A Satin Chrome Finish That Minimizes Scratches And Corrosion And Increases Readability By Achieving A Brighter, Non-Glare Finish That Enhances The Contrast Between The Black Graduation Lines And The Surface Of The Rule..
Each Rule Comes In Vinyl Storage Pouch. These Are Well Made Rules And Will Provide Years Of Reliable Service In Any Shop..
Specifications: 6” Long X 3/4” Wide X 0.040” Thick.
Our Rules Are Made From Japanese Rust-Resistant Stainless Steel That Has Been Tempered Creating A Ruler That Can Flex If Needed And Snap Back Straight. The Edges And Ends Have Been Ground Parallel, Straight, Smooth And Square. Graduations Are Produced Via A Photoengraving Process Creating Very Consistent And Accurate Markings With Uniform Line Widths. Once Etched, Graduations Are Black Filled For Maximal Readability. Graduations Are Etched And Not Printed So Will Not Wear Off With Prolonged Use. Graduations Conform To Strict International Eec 1 Accuracy Standards, I.E. +/- 0.2Mm At 20° C For 1000Mm Ruler. Markings Feature Quick-Reading 1/8Ths And 1/16Ths On Both Sides.
Features
- Every woodworker should own a few precision machinist rulers as they will improve the accuracy of his/her work. Traditionally, the most common graduation markings used by woodworkers are 4R, or 1/8ths and 1/16ths on one side and 1/32nds and 1/64ths on the reverse. The fact is most woodworkers never use the finer 1/32nd and 1/64th markings as they are hard to read, too precise for most tasks, and just plain confusing, e.g., just what does 51/64th or 19/32nds really mean? So, we had rulers made under our Benchmark Tools brand that included the most commonly used 1/8th and 1/16th graduation marks on both sides
- Our rules are made from Japanese rust-resistant stainless steel that has been tempered creating a ruler that can flex if needed and snap back straight. The edges and ends have been ground parallel, straight, smooth and square. Graduations are produced via a photoengraving process creating very consistent and accurate markings with uniform line widths. Once etched, graduations are black filled for maximal readability. Graduations are etched and not printed so will not wear off with prolonged use. Graduations conform to strict international EEC 1 Accuracy Standards, i.e. +/- 0.2mm at 20 C for 1000mm ruler. Markings feature quick-reading 1/8ths and 1/16ths on both sides
- Rule is finished with a satin chrome finish that minimizes scratches and corrosion and increases readability by achieving a brighter, non-glare finish that enhances the contrast between the black graduation lines and the surface of the rule.
- Specifications: 6 long x 3/4 wide x 0.040 thick
- Each rule comes in vinyl storage pouch. These are well made rules and will provide years of reliable service in any shop.
- See more on Amazon...
Brand: Benchmark Tools | Manufacturer: Taylor Toolworks
Dimensions: 0.04 x 6.00 x 0.75 inches
See On Amazon #4
Benchmark Tools 106612 6 Flexible Woodworking Ruler Satin Chrome Finish 1/8th and 1/16th Grads Hardened Stainless Steel
Asin: B0BH7Z1DT1 | Ean: 0796029774427 | UPC: 796029774427
Rule Is Finished With A Satin Chrome Finish That Minimizes Scratches And Corrosion And Increases Readability By Achieving A Brighter, Non-Glare Finish That Enhances The Contrast Between The Black Graduation Lines And The Surface Of The Rule..
Each Rule Comes In Vinyl Storage Pouch. These Are Well Made Rules And Will Provide Years Of Reliable Service In Any Shop..
Specifications: 6” Long X 1/2” Wide X 0.020” Thick.
Our Rules Are Made From Japanese Rust-Resistant Stainless Steel That Has Been Tempered Creating A Ruler That Can Flex If Needed And Snap Back Straight. The Edges And Ends Have Been Ground Parallel, Straight, Smooth And Square. Graduations Are Produced Via A Photoengraving Process Creating Very Consistent And Accurate Markings With Uniform Line Widths. Once Etched, Graduations Are Black Filled For Maximal Readability. Graduations Are Etched And Not Printed So Will Not Wear Off With Prolonged Use. Graduations Conform To Strict International Eec 1 Accuracy Standards, I.E. +/- 0.2Mm At 20° C For 1000Mm Ruler. Markings Feature Quick-Reading 1/8Ths And 1/16Ths On Both Sides.
Features
- Every woodworker should own a few precision machinist rulers as they will improve the accuracy of his/her work. Traditionally, the most common graduation markings used by woodworkers are 4R, or 1/8ths and 1/16ths on one side and 1/32nds and 1/64ths on the reverse. The fact is most woodworkers never use the finer 1/32nd and 1/64th markings as they are hard to read, too precise for most tasks, and just plain confusing, e.g., just what does 51/64th or 19/32nds really mean? So, we had rulers made under our Benchmark Tools brand that included the most commonly used 1/8th and 1/16th graduation marks on both sides
- Our rules are made from Japanese rust-resistant stainless steel that has been tempered creating a ruler that can flex if needed and snap back straight. The edges and ends have been ground parallel, straight, smooth and square. Graduations are produced via a photoengraving process creating very consistent and accurate markings with uniform line widths. Once etched, graduations are black filled for maximal readability. Graduations are etched and not printed so will not wear off with prolonged use. Graduations conform to strict international EEC 1 Accuracy Standards, i.e. +/- 0.2mm at 20 C for 1000mm ruler. Markings feature quick-reading 1/8ths and 1/16ths on both sides
- Rule is finished with a satin chrome finish that minimizes scratches and corrosion and increases readability by achieving a brighter, non-glare finish that enhances the contrast between the black graduation lines and the surface of the rule.
- Specifications: 6 long x 1/2 wide x 0.020 thick
- Each rule comes in vinyl storage pouch. These are well made rules and will provide years of reliable service in any shop.
- See more on Amazon...
Brand: Benchmark Tools | Manufacturer: Taylor Toolworks
Dimensions: 0.04 x 6.00 x 0.75 inches
See On Amazon
Looking For Something Else?
Search