MICRO JIG ZP750-S1 Zeroplay Miter Stop (New, Upgraded)
Asin: B0BH7TFC42 | Model: ZP750-S1 | PartNumber: ZP750-S1 | Ean: 0815267011436 | UPC: 815267011436
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Fits Standard (3/4" X 3/8") T Miter Slots, Shopsmith And General Miter Tracks.
Country Of Origin: Taiwan.
Works As An Anchor For Hold-Downs And Clamps Along The Miter Slot.
Features
- Accurate miter stop that locks into the T-Track for precise stop cuts and blind rabbeting
- Works as an anchor for hold-downs and clamps along the miter slot
- Fits standard (3/4 x 3/8) T miter slots, ShopSmith and General miter tracks
- Country of Origin: Taiwan
- See more on Amazon...
Brand: MICRO JIG | Manufacturer: Microjig
Warranty: Extended 3-Year Warranty from Authorized Resellers Only
See On Amazon Similar To MICRO JIG ZP750S1 Zeroplay Miter
#1
Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop
Asin: B087XWCV61 | Model: 11567 | PartNumber: 11567 | Ean: 0817918022532 | UPC: 817918022532
The Head Is Mounted To A Solid Steel Miter Bar That Measure 18” In Length And Is .354” Thick By .730” Wide. Standard Miter Slots Are 3/4” X 3/8” With A 1/8” “T” Slot (Slight Variances From Brand To Brand) Running The Length On The Bottom Of The Slot. The Steel Miter Bar Is Equipped With A Metal, Removable Retaining Disc That Measures 7/8” In Diameter And Is Just Shy Of 1/8” To Fit Into To The “T” Slot To Prevent Accidental Lifting When Feeding Your Stock Through..
Both Ends Of The Fence Are Cut At Exactly 45 Degrees. This Allows You To Position The Fence Extra Close To The Saw Blade (With The Power Turned Off) So You Have Even More Control Over The Workpiece You Are Cutting. The Fence Comes With A Flip Stop That Makes Repetitive Cuts A Breeze. When Not In Use The Flip Stop Can Be Flipped Up And Out Of The Way. Also Include Are Two Sticky Back Measuring Tapes. 1 Tape Is Left To Right Reading And The Other Is Right To Left Reading..
Made From A Single Piece Of Extruded Aluminum, This Precision Miter Gauge Fence Is Not Only Durable, Its Accurate And Saves Setup Time. The Fence Is Designed To Be Used With Most Any Miter Gauge With Its Off-Set Mounting Track On The Back Of The Fence. The Off-Set Track Allows You To Flip The Fence For Lower Profile Miter Gauge Mounts And Flip Back For Standard Height Miter Gauges. The Fence Can Be Mounted To Older Miter Gauges By Adding A Wooden Block Mount With Wooden Screws If Necessary..
The .200” Thick, Adjustable, Solid Aluminum Head Is Machined With 13 Positive Stop Holes. 1 Hole Is At 90 Degrees While The 6 Holes On Both Sides Are At 22.5, 30, 45, 60, 67.5 And 90 Degrees. The Positive Stops Are Perfect For Many Woodworking Projects As They Are The Angles That Are Typically Used.To Adjust The Head You Simply Loosen The Post Knob Handle, Pull The Spring Loaded Indexing Pin Outward, Rotate The Head To The Desired Position, Release The Pin And Lock Into Place..
Features
- The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs.
- The .200 thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place.
- The head is mounted to a solid steel miter bar that measure 18 in length and is .354 thick by .730 wide. Standard miter slots are 3/4 x 3/8 with a 1/8 T slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8 in diameter and is just shy of 1/8 to fit into to the T slot to prevent accidental lifting when feeding your stock through.
- Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.
- Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools Inc.
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 2.50 pounds
See On Amazon #2
Kreg KMS7102 Table Saw Precision Miter Gauge System - Factory Calibrated - With Miter Gauge Fence & Bar - Miter Gauge for Table Saw
Asin: B0002QZ4RG | Model: KMS7102 | PartNumber: KMS7102
Ean: 0721019584007, 0772040301583, 0647096521127, 0745667216639, 5526680002288, 0732454078327, 0785497050966
UPC: 785497050966, 772040301583, 647096521127, 721019584007, 745667216639, 732454078327
Accurate Measuring Tool: Miter Saw Guide Has 5 Positive Stops; Vernier Scale Aids Adjustments To 1/10 Of A Degree.
Premium Kreg Tools: We Offer Products That Help Woodworkers Close The Gap Between Idea And Outcome.
Secure Workshop Accessories: Swing Stop Lets You Switch Boards Quickly Without Losing Measurements On Miter Gauge.
Versatile Woodworking Tool: Saw Accessory Has A Brass Pin That Lets You Make Quick Changes Between Stop Angles.
Features
- Premium Home Improvement Tools: This miter saw table gauge helps you make accurate and repeatable angled cuts
- Versatile Woodworking Tool: Saw accessory has a brass pin that lets you make quick changes between stop angles
- Accurate Measuring Tool: Miter saw guide has 5 positive stops; vernier scale aids adjustments to 1/10 of a degree
- Secure Workshop Accessories: Swing stop lets you switch boards quickly without losing measurements on miter gauge
- Premium Kreg Tools: We offer products that help woodworkers close the gap between idea and outcome
- See more on Amazon...
Brand: KREG | Manufacturer: Kreg Tool Inc
Dimensions: 6.25 x 25.25 x 2.63 Inches | Weight: 2.60 Pounds
Warranty: LIMITED
See On Amazon #3
Microjig ZP750-B2S2 Zeroplay Miter Bar 2-Pack - Best Seller (New, Upgraded)
Asin: B0BH7WHX65 | Model: ZP750-B2S2 | PartNumber: ZP750-B2S2 | Ean: 0815267011443 | UPC: 815267011443
Calibrate Your Miter Bar Quickly: The Zeroplay Miter Bars Are Adjusted To Fit The Miter Slot While It Is Attached To Your Sled, Allowing You To Get The Best Fit Possible. Just Set, Test, And Adjust If Needed, Then Begin Using Your Sled. The Two Halves Of The Zeroplay Expand To Fit The Slot, Providing Full Contact Along Both Edges Of The Bar.
Speed And Versatility: Miter Bars Can Be Used In Tandem For Longer Sleds Or To Engage Both Miter Slots At The Same Time. Retrofit To Your Existing Sled And Move Easily From Jig To Jig.
Top-Down Installation: Miter Bar Secures The Sled From The Top, Allowing You To Square It To The Blade Without Taking It Off The Table.
Build Accurate Sleds Fast: The Zeroplay Miter Bars Take Sleds To The Next Level Of Precision. The Miter Bars Are Adjusted To Fit Your Miter Slots From Above The Sled, Making The Process As Easy And Precise As Possible. The Zeroplay Expands To Engage Both Edges Of The Miter Slot Along Their Entire Length.
Features
- Zeroplay Upgraded Miter Bars: The Microjig ZP750-B2S2 Zeroplay Upgraded Miter Bars are ideal for table saws, router tables, and band saws. The two precision bars allow for building larger sleds
- Build Accurate Sleds Fast: The ZeroPlay Miter Bars take sleds to the next level of precision. The miter bars are adjusted to fit your miter slots from above the sled, making the process as easy and precise as possible. The ZeroPlay expands to engage both edges of the miter slot along their entire length
- Calibrate Your Miter Bar Quickly: The ZeroPlay Miter Bars are adjusted to fit the miter slot while it is attached to your sled, allowing you to get the best fit possible. Just set, test, and adjust if needed, then begin using your sled. The two halves of the ZeroPlay expand to fit the slot, providing full contact along both edges of the bar
- Top-Down Installation: Miter Bar secures the sled from the top, allowing you to square it to the blade without taking it off the table
- Speed and Versatility: Miter Bars can be used in tandem for longer sleds or to engage both miter slots at the same time. Retrofit to your existing sled and move easily from jig to jig
- See more on Amazon...
Brand: MICRO JIG | Manufacturer: Microjig
Dimensions: 1.50 x 11.00 x 4.40 Inches
Warranty: Extended 3-Year Warranty from Authorized Resellers
See On Amazon #4
MICROJIG GRR-RIPPER TJ-5000 Microdial Tapering Jig For Table Saws, Yellow
Asin: B00BP7284I | Model: TJ-5000 | PartNumber: TJ-5000 | Ean: 0752913146824, 0815267010422, 0788809618717 | UPC: 815267010422, 752913146824, 788809618717
Precision Tapered Cutting As Accurate As 1/8 Of Degree.
Set Your Taper Angle By Degree Or Rise And Run For Last Cutting.
Works With The Grr-Ripper 3D Pushblock System For Ultimate Safety And Control.
The Microdial Gauge Locks In Exact Incremental Taper Angles.
Features
- The Most PRecise, Versatile Tapering Jig
- The MICRODIAL gauge locks in exact incremental taper angles
- Precision tapered cutting as accurate as 1/8 of degree
- Works with the GRR-RIPPER 3D PUSHBLOCK system for ultimate safety and control
- Set your taper angle by degree or rise and run for last cutting
- See more on Amazon...
Brand: MICRO JIG | Manufacturer: MICROJIG, Inc.
Dimensions: 1.75 x 26.00 x 8.75 Inches | Weight: 3.31 Pounds
Warranty: Extended 3-Year Manufacturer's Warranty from Authorized Dealers Only
See On Amazon #5
Rockler 45 Degree Miter Sled for Table Saw - Miter Saw Sled Ensures Durability & Low-Friction Sliding - Table Saw Accessories Fits Standard 3/8" x 3/4" Miter Slot Fence Accessories
Asin: B0186IPNCM | Ean: 0785533187557, 0400000315935 | UPC: 400000315935, 785533187557
Adjusting Miter Track Fit: Use A 7/64" Hex Wrench (Not Included) To Advance The Nylon Set Screws In The Rockler 45 Degree Miter Sled Bar Until You Achieve A Smooth, No-Slop Fit In Your Saw’S Miter Track..
Easy To Use: The Table Saw Accessories Miter Can Be Easily Drilled To Add Extended Fences And Stops. Pre-Installed Adjustable Nylon Pins Provide A No-Slop Fit To The Miter Track..
Standard Slot: Through Slots In The Base Allow You To Securely Clamp Moldings At Table Level. This Table Saw Miter Sled Fits Standard 3/8" X 3/4" Miter Slots..
45 Degree Miter Sled: This Table Saw Sled System Gives You An Exact 45-Degree Cut Every Time. Our Table Saw Miter Is Great For Picture Frames Or Anytime Accurate Corner. Miters Cuts Are Needed..
Features
- Table Saw Miter Sled: This is the perfect table saw sled, no adjustments needed! Simply cut one piece on the leading face, one on the trailing face, and voila! Since both pieces reference off a perfect 90-degree angle, the miters will fit perfectly.
- 45 Degree Miter Sled: This table saw sled system gives you an exact 45-degree cut every time. Our table saw miter is great for picture frames or anytime accurate corner. Miters cuts are needed.
- Adjusting Miter Track Fit: Use a 7/64 hex wrench (not included) to advance the nylon set screws in the Rockler 45 degree miter sled bar until you achieve a smooth, no-slop fit in your saw s miter track.
- Standard Slot: Through slots in the base allow you to securely clamp moldings at table level. This table saw miter sled fits standard 3/8 x 3/4 miter slots.
- Easy To Use: The table saw accessories miter can be easily drilled to add extended fences and stops. Pre-installed adjustable nylon pins provide a no-slop fit to the miter track.
- See more on Amazon...
Brand: ROCKLER | Manufacturer: ROCKLER
Weight: 0.73 Pounds
See On Amazon #6
Fulton Precision Miter Gauge with a Standard Slot (3/4 x 3/8 ) Steel Bar with Adjustable Spring Loaded Plungers and Removable Retaining Disc
Asin: B072WBLNDD | Model: 1250 | PartNumber: 1250 | Ean: 0810948015604 | UPC: 810948015604
To Adjust The Head You Simply Loosen The Post Knob Handle, Pull The Spring Loaded Indexing Pin Outward, Rotate The Head To The Desired Position, Release The Pin And Lock Into Place By Tightening The Post Knob Handle. The Aluminum Head Has Two ¼” X ½” Slots Milled Into It For Mounting A Miter Fence If So Desired. The Slots Are Approximately 1-1/8” From The Base Of The Miter Gauge Head..
The Steel Miter Bar Is Equipped With A Metal, Removable Retaining Disc That Measures 7/8” In Diameter And Is Just Shy Of 1/8” To Fit Into To The “T” Slot To Prevent Accidental Lifting When Feeding Your Stock Through. If Your Saw Does Not Have A “T” Slot, You Can Remove The Disc. The Steel Miter Bar Is Also Equipped With Spring Loaded, Adjustable Plungers On The Side Of The Bar. The Plungers Can Be Adjusted With The Provide Hex Key Wrench In Or Out To Provide You With The Ideal Fit..
The Head Is Mounted To A Solid Steel Miter Bar That Measure 18” In Length And Is .354” Thick By .730” Wide. Standard Miter Slots Are 3/4” X 3/8” With A 1/8” “T” Slot (Slight Variances From Brand To Brand) Running The Length On The Bottom Of The Slot. The Steel Miter Bar Is Equipped With A Metal, Removable Retaining Disc That Measures 7/8” In Diameter And Is Just Shy Of 1/8” To Fit Into To The “T” Slot To Prevent Accidental Lifting When Feeding Your Stock Through..
The .200” Thick, Adjustable, Solid Aluminum Head Is Machined With 13 Positive Stop Holes. 1 Hole Is At 90 Degrees While The 6 Holes On Both Sides Are At 22.5, 30, 45, 60, 67.5 And 90 Degrees. The Positive Stops Are Perfect For Many Woodworking Projects As They Are The Angles That Are Typically Used..
Features
- If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well. The Fulton Miter Gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs.
- The .200 thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.
- To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place by tightening the post knob handle. The aluminum head has two x slots milled into it for mounting a miter fence if so desired. The slots are approximately 1-1/8 from the base of the miter gauge head.
- The head is mounted to a solid steel miter bar that measure 18 in length and is .354 thick by .730 wide. Standard miter slots are 3/4 x 3/8 with a 1/8 T slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8 in diameter and is just shy of 1/8 to fit into to the T slot to prevent accidental lifting when feeding your stock through.
- The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8 in diameter and is just shy of 1/8 to fit into to the T slot to prevent accidental lifting when feeding your stock through. If your saw does not have a T slot, you can remove the disc. The steel miter bar is also equipped with spring loaded, adjustable plungers on the side of the bar. The plungers can be adjusted with the provide hex key wrench in or out to provide you with the ideal fit.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton
Weight: 0.00 pounds
See On Amazon #7
4 Pcs UHMW Precision Milled Bar for Jigs Crosscut Sled for Table Saw Sled Fixtures or Miter Slots (size 3/4" x 3/8") Miter Bar Slider Table Saw Gauge Rod for Router Table Bandsaws (3/4 x 3/8 x 17'')
Asin: B0C2TGXDCQ
Withstand Friction Function: The Material Of Miter Bar Withstands Friction Better Than Wood And Lower Quality Or Less Dense Plastics; In This Way, You Can Apply It With Confidence And Giving A Nice Shopping Experience.
Wide Application: Uhmw Makes Jigs And Fixtures For Your Table Saws, Routers, And More, Ideal For Sleds Where Repetitive Sliding Often Occurs; We Also Have Screws For The Miter Bars For Table Saw That Need To Be Drilled For Installation.
Stable And Excellent Impact Strength: Uhmw Does Not Expand Or Contract Like Wood, Does Not Absorb Moisture And Will Not Swell Over Time With Exposure; The Crosscut Sled Can Be Exposed At Low Temperature.
Smooth Surface To Hold: The Table Saw Sled Leaves No Residue, And The Uhmw Is A Linear Polyethylene Material, Very Durable And Can Be Applied Over And Over Again; No Need To Clean Up After Use, Saving Your Energy.
Features
- What You Will Receive: there are 4 pieces of saw rail track measuring about3/4 x 3/8 x 17'', ideal for table saws, band saws or routers; You can share it with your partners to use together, easy to operate
- Smooth Surface to Hold: the table saw sled leaves no residue, and the UHMW is a linear polyethylene material, very durable and can be applied over and over again; No need to clean up after use, saving your energy
- Withstand Friction Function: the material of miter bar withstands friction better than wood and lower quality or less dense plastics; In this way, you can apply it with confidence and giving a nice shopping experience
- Stable and Excellent Impact Strength: UHMW does not expand or contract like wood, does not absorb moisture and will not swell over time with exposure; The crosscut sled can be exposed at low temperature
- Wide Application: UHMW makes jigs and fixtures for your table saws, routers, and more, ideal for sleds where repetitive sliding often occurs; We also have screws for the miter bars for table saw that need to be drilled for installation
- See more on Amazon...
Brand: Roowest | Manufacturer: Roowest
See On Amazon #8
Microjig Fitfinder MB-050-0750LM Lock Miter Router Bit, 1/2"" Shank
Asin: B0CCJZ8TWW | Model: MB-050-0750LM | PartNumber: MB-050-0750LM | Ean: 0815267011733 | UPC: 815267011733
Simplified Router Table Setup: Once You Have Set The Correct Bit Height Using The Center Finding Platform, The Only Adjustment Needed Is With The Fence To Achieve A Perfect Fit.
Versatile Application: Whether You Are A Professional Woodworker Or A Hobbyist, The Microjig Fitfinder Lock Miter Bit Is A Valuable Addition To Your Toolkit.
Confident Joinery: By Utilizing The Microjig Fitfinder Lock Miter Bit, You Can Confidently Add This Important Joinery Technique To Any Of Your Woodworking Projects.
Fast And Precise Joints: With The Microjig Fitfinder Lock Miter Bit, You Can Consistently Create Well-Fitted Lock Miter Joints Quickly And Easily.
Features
- Innovative Bit: The Microjig Fitfinder Lock Miter innovative bit features a patent-pending Center Finding Platform, which is milled into the bit body at the precise center of the cutting profile
- Fast and Precise Joints: With the Microjig Fitfinder Lock Miter Bit, you can consistently create well-fitted lock miter joints quickly and easily
- Simplified Router Table Setup: Once you have set the correct bit height using the Center Finding Platform, the only adjustment needed is with the fence to achieve a perfect fit
- Confident Joinery: By utilizing the Microjig Fitfinder Lock Miter Bit, you can confidently add this important joinery technique to any of your woodworking projects
- Versatile Application: Whether you are a professional woodworker or a hobbyist, the Microjig Fitfinder Lock Miter Bit is a valuable addition to your toolkit
- See more on Amazon...
Brand: MICRO JIG | Manufacturer: Microjig
Dimensions: 4.00 x 2.25 x 2.25 Inches | Weight: 0.44 Pounds
See On Amazon #9
POWERTEC 71143 Deluxe Miter Gauge for Table Saw | Miter Guide with 120 Angle Stops, Silver
Asin: B084H67Q6N | Model: 71143 | PartNumber: 71143 | Ean: 0843441104902 | UPC: 843441104902
Features: A Lightweight Design With A Durable Laser-Cut Aluminum Construction, Large Gauge Handle, Universal Fence Mounting Bracket Pivoting Locking Mechanism, A Removal Plate That Allows The Miter Gauge To Be Used With T-Slotted And Non T-Slotted Miter Slots, And Adjustable Expansion Discs That Remove All Side Play From The Bar, Creating A Perfect Fit.
Universal Design:Suited For Most Standard Miter Slots (3/4” Width X 3/8” Depth) With Or Without T-Slots, Making It Compatible With Popular Brand Table Saws, Band Saws, Router Tables, Disk And Belt Sanders. Please Note : Will Not Work With Smaller Saws Or Tool With 5/8” Miter Slots..
Precision: Angle Guide (With 120 Total Angle Stops) In 5 Degree Increments Over A Full 180-Degree Range, And Allows For Plus Or Minus 60-Degree Range Miter Cuts.
Function: A High Performance Woodworking Angle Tool That Possesses A Miter Guide Which Mounts Into The Miter Slots Of Your Table Saw (Band Saws And Other Applications) And Then Guides The Miter Gauge Parallel To The Blade For High Precision Angled And Crosscuts.
Features
- Includes: (1) miter gauge for table saw
- Function: a high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw (band saws and other applications) and then guides the miter gauge parallel to the blade for high precision angled and crosscuts
- Features: a lightweight design with a durable laser-cut aluminum construction, Large gauge handle, universal fence mounting bracket pivoting locking mechanism, A removal plate that allows the miter gauge to be used with t-slotted and non t-slotted miter slots, and adjustable Expansion discs that remove all side play from the bar, creating a perfect fit
- Precision: angle guide (with 120 total angle stops) in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts
- Universal design:suited for most standard miter slots (3/4 width x 3/8 depth) with or without T-slots, making it compatible with popular Brand table saws, band saws, Router tables, disk and belt sanders. PLEASE NOTE : will not work with smaller saws or tool with 5/8 miter slots.
- See more on Amazon...
Brand: POWERTEC | Manufacturer: POWERTEC
Dimensions: 2.50 x 18.90 x 4.80 inches
See On Amazon #10
Microjig ZP750-B1 Zeroplay Miter Bar 1-Pack (New, Upgraded)
Asin: B0BH7CK9ZF | Model: ZP750-B1 | PartNumber: ZP750-B1 | Ean: 0815267011429 | UPC: 815267011429
Build Your Own Unique Jig Or Jigs With Included Plan.
Designed In The Usa By Microjig.
Extended 3-Year Warranty, 100% Satisfaction Guaranteed.
Calibrate And Adjust Bar Thickness While Attached To Sled.
Retro-Fit Your Existing Cross-Cut Jigs For Improved Precision.
Fits Standard (3/4" X 3/8") T Miter Slots, Shopsmith And General Miter Tracks.
Easily Square Jig To The Blade Adjustment While Securing Through The Top Of The Sled.
Features
- Build table saw sleds fast!
- Easily square jig to the blade adjustment while securing through the top of the sled
- Build your own unique jig or jigs with included plan
- Fits standard (3/4 x 3/8) T miter slots, ShopSmith and General miter tracks
- Calibrate and adjust bar thickness while attached to sled
- Retro-Fit your existing cross-cut jigs for improved precision
- Designed in the USA by Microjig
- Extended 3-Year Warranty, 100% satisfaction guaranteed
- See more on Amazon...
Brand: MICRO JIG | Manufacturer: Microjig
Warranty: Extended 3-Year Warranty from Authorized Resellers
See On Amazon #11
The Beadsmith Miter Cutting Vise Jig Swiss Style, Made of Steel, 2.75 x 2 For Filing Small Metal, Creating Flat Ends on Wire and Tubing Form 45- & 90-Degree Angles and Bends
Asin: B00766H27A | Model: MCV100 | PartNumber: MCV100 | Ean: 0790524135974 | UPC: 790524135974
Metalworking Tool: This Jig Is Great For Jewelry Makers, Metalsmiths And Wire Workers. In Addition, This Vise Can Be Used To Hold Ring Shanks, To File A Flat Spot, As Well As Opening Jump Rings. You Can Secure A Larger Ring On The Vise And Use That Gap To Open The Jump Rings..
The Beadsmith - 40 Years In The Making! 💎 Trusted To Bring You The Best Quality Beads, Tools, And Supplies. Making Jewelry Should Be A Positive Experience. Let Us Join You In The Creative Journey. Our Experts Are Here To Help. Your Satisfaction Is Important To Us. Contact Us With Any Quality Issues Or Concerns..
Easy To Use: File On The Larger Flat Edge. Insert Your Metal Into Either Slot, With The Flat Side Against The Peg. Leave The Part That You Want To File Hanging Out. Evenly Tighten The Vise. File Down The Metal Until It Is Flat Against The Steel Of The Jig..
Jig Size: Our Swiss Style Vise/Jig Is Made Of Tool Grade Steel. It Is 2.75 Inches (70Mm) Tall And 2 Inches (50Mm) Wide. This Jig Can Create 45° And 90° Angles Or Sharp Bends. The Design Features Cutter Guide Holders..
Features
- MITER CUTTER: This metalworking tool is designed for forming angled bends in metal. It is also perfect for filing metal, as well as creating flat ends on wire and tubing. In addition, it can be used as a vise to hold objects for filing, sawing and sanding.
- JIG SIZE: Our Swiss style vise/jig is made of tool grade steel. It is 2.75 inches (70mm) tall and 2 inches (50mm) wide. This jig can create 45 and 90 angles or sharp bends. The design features cutter guide holders.
- METALWORKING TOOL: This jig is great for jewelry makers, metalsmiths and wire workers. In addition, this vise can be used to hold ring shanks, to file a flat spot, as well as opening jump rings. You can secure a larger ring on the vise and use that gap to open the jump rings.
- EASY TO USE: File on the larger flat edge. Insert your metal into either slot, with the flat side against the peg. Leave the part that you want to file hanging out. Evenly tighten the vise. File down the metal until it is flat against the steel of the jig.
- THE BEADSMITH - 40 years in the making! Trusted to bring you the best quality beads, tools, and supplies. Making jewelry should be a positive experience. Let us join you in the creative journey. Our experts are here to help. Your satisfaction is important to us. Contact us with any quality issues or concerns.
- See more on Amazon...
Brand: The Beadsmith | Manufacturer: The Beadsmith
See On Amazon #12
Hatsbi UHMW Crosscut Sled For Table Saw Sled Miter Bars 3/4" X 3/8" X 17" For Jigs Fixtures or Miter Slots (size 3/4"x3/8") 4 x UHMW Bars
Asin: B0C2HSDSQD | Model: UHMW Bar | PartNumber: UHMW Bar | Ean: 5060848520134
Extremely Durable – Ideal For Constant Repetitive Use. Uhmw (Ultra High Molecular Weight) Polymer (Plastic) Is 10 Times Heavier Than Regular High-Density Polyethylene For Stability. Uhmw Won’T Expand Or Contract Like Wood Does. Does Not Absorb Moisture And Will Not Swell Up Over Time Due To Exposure..
Outstanding Impact Strength - Even At Low Temperatures. Jigs, Fixtures Or Miter Slots (3/4” X 3/8”) – Ideal For Table Saw, Band Saw Or Router Table..
Very Slick And Self Lubricating – Very High Abrasion Resistance. Uhmw Bars Won’T Leave Any Residue, Dust Or Shavings. The Non-Stick Surface Is Easy To Clean..
Features
- EXCELLENT SLIDING MATERIAL - due to the low coefficient of friction it has, which makes it ideal for sleds where repetitive sliding is necessary.
- VERY SLICK AND SELF LUBRICATING Very high abrasion resistance. UHMW bars won t leave any residue, dust or shavings. The non-stick surface is easy to clean.
- EXTREMELY DURABLE Ideal for constant repetitive use. UHMW (Ultra High Molecular Weight) Polymer (plastic) is 10 times heavier than regular high-density polyethylene for stability. UHMW won t expand or contract like wood does. Does not absorb moisture and will not swell up over time due to exposure.
- OUTSTANDING IMPACT STRENGTH - Even at low temperatures. JIGS, FIXTURES OR MITER SLOTS (3/4 X 3/8 ) ideal for table saw, band saw or router table.
- See more on Amazon...
Brand: Hatsbi | Manufacturer: Lurentice Trading Ltd
See On Amazon #13
Micro Jig MB-025-0525PL Zeroplay 1/2" X 14" 2-Step Plunge Router Bit (1/4" Shank) (R7b)
Asin: B0BYTH4YTP | Model: MB-025-0525PL | PartNumber: MB-025-0525PL | Ean: 0815267011535 | UPC: 815267011535
Dual Functionality: Use In A Drill Press For Counterbored Holes Or A Router Table For Seamless Stepped Slots Compatible With Numerous Hardware Types..
Stress-Free Plunge Router Bit: Enjoy Our Exceptional Customer Service, Ensuring A Hassle-Free Experience With Speedy Resolutions..
Boost Your Efficiency: Quickly Create Custom Jigs With This Innovative Addition To The Microjig Zeroplay Lineup..
Patented Radius Flair: Experience Smooth, Visually Appealing Holes And Slots With Microjig's Unique Design..
Eliminate Guesswork: Streamline Drilling And Counterboring With Accurate Mounting Holes For Zeroplay Screws In Materials Up To 1" Thick..
Features
- Precision Milling: Effortlessly create the perfect fit for ZEROPLAY, MATCHFIT, and various other hardware.
- Eliminate Guesswork: Streamline drilling and counterboring with accurate mounting holes for ZEROPLAY screws in materials up to 1 thick.
- Dual Functionality: Use in a drill press for counterbored holes or a router table for seamless stepped slots compatible with numerous hardware types.
- Patented Radius Flair: Experience smooth, visually appealing holes and slots with Microjig's unique design.
- Stress-Free Plunge Router Bit: Enjoy our exceptional customer service, ensuring a hassle-free experience with speedy resolutions.
- Boost Your Efficiency: Quickly create custom jigs with this innovative addition to the Microjig ZeroPlay lineup.
- See more on Amazon...
Brand: MICRO JIG | Manufacturer: Microjig
Dimensions: 1.90 x 3.60 x 1.90 inches
Warranty: Extended 3-Year Warranty from Authorized Resellers
See On Amazon #14
Microjig DV-360ZP750B1 Zeroplay 360-Degree Adjustable Versatile Accurate and Easy to Use Sled Kit compatible with T and U shaped Miter Bars
Asin: B0BH773Y6G | Model: DV-360ZP750B1 | PartNumber: DV-360ZP750B1 | Ean: 0815267011399 | UPC: 815267011399
Speed And Precision: The Zeroplay Miter Bar That Guides The 360 Sled Is Adjusted To Your Saw From Above, Filling The Miter Slot Fully From Edge To Edge. It Has Never Been Easier To Get The Perfect Fit; Smooth Movement Along The Table With Zero Play Side To Side.
Everything But The Wood: This Sled Is Incredibly Easy To Build. All You Need Is Some Plywood, A 1/2-Inch 14-Degree Dovetail Router Bit, And About An Hour. The Package Includes Easy-To-Follow Plans.
360 Degrees Of Adjustability: The Unique Grid Layout Of Dovetail Grooves Allows You To Set Your Fence At Any Angle, And Lock It In Place With The Included Matchfit Dovetail Hardware. No Matter The Angle Of Your Cut, The Zeroplay Miter Bar Keeps The Sled Running Parallel To The Blade At All Times.
Fit Any Miter Slot: Zeroplay Miter Bars Will Fit Any Standard (3/4 X 3/8 Inches) Miter Slot That Measures Between 0.73 Inches And 0.79 Inches Wide And Is At Least 5/16 Inches Deep. Compatible Miter Tracks Include But Are Not Exclusive To Shopsmith, Sawstop, Bosch 4100, Delta Unisaw, Powermatic, Rigid, Dewalt, And General 350 Tracks.
Features
- Ultimate Material Control: Add Matchfit Dovetail Clamps to secure material when cutting tricky angles. For instance, tapered legs are typically cut at a deep angle, and need to be secured very close to the blade. You don t want your hands anywhere near that cut. Dovetail Clamps secure the material for you, keeping your hands safely clear of the blade
- Fit Any Miter Slot: ZeroPlay Miter Bars will fit any standard (3/4 x 3/8 inches) miter slot that measures between 0.73 inches and 0.79 inches wide and is at least 5/16 inches deep. Compatible miter tracks include but are not exclusive to ShopSmith, SawStop, Bosch 4100, Delta Unisaw, Powermatic, Rigid, Dewalt, and General 350 Tracks
- Speed and Precision: The ZeroPlay Miter Bar that guides the 360 sled is adjusted to your saw from above, filling the miter slot fully from edge to edge. It has never been easier to get the perfect fit; smooth movement along the table with zero play side to side
- 360 Degrees of Adjustability: The unique grid layout of dovetail grooves allows you to set your fence at any angle, and lock it in place with the included MatchFit Dovetail Hardware. No matter the angle of your cut, the ZeroPlay Miter Bar keeps the sled running parallel to the blade at all times
- Everything But The Wood: This sled is incredibly easy to build. All you need is some plywood, a 1/2-Inch 14-degree dovetail router bit, and about an hour. The package includes easy-to-follow plans
- See more on Amazon...
Brand: MICRO JIG | Manufacturer: Microjig
Dimensions: 1.40 x 11.10 x 4.50 inches
Warranty: Extended 3-Year Warranty from Authorized Resellers Only
See On Amazon #15
DCT Miter Track Slot Fixture Hardware 12-Piece Kit, 3/4 x 3/8in Table Saw, Router, Disc Sander Feather Board Jig
Asin: B0772YK7BR | Model: 9046 | PartNumber: 9046 | Ean: 0688295879046 | UPC: 688295879046
Easy To Use: The Bars Pull Up Tight In The Slot As You Tighten The Knobs; Simply Slide It To Where You Want The Fixture, And When You Turn The Knob It Expands The Metal To Secure The Bar In The Slot; Bolts Lock By Expanding The Miter Bar; The Tapered Head Of The Screw Spreads The Bar Open So It Pushes Into The Sides.
Contents: Package Includes (1) Aluminum Extrusion Stop T-Nut, (1) Aluminum Extrusion Pivot T-Nut, (2) 1/4-Inch Triangle Thru Knobs, (2) 1/4-Inch Flat Head Screws, (1) 1/4-Inch Hex Set Screw, (2) Washers, (1) 1/8-Inch Allen Wrench Hex Key, (1) Plastic Space, And (1) 4Mm X 20Mm Self-Tapping Screw; Miter Track Required, Not Included.
Built To Last: All Pieces Are Constructed From Solid Metal; The Included Plastic Knobs Have Metal Thread Inserts For Maximum Strength And Longevity.
Various Applications: Use The Miter Gauge Track On A Table Saw, Router Table, Disc Sander, Or Any Other Tool With A Standard 3/4-Inch Wide X 3/8-Inch Deep Miter Gauge Slot.
Features
- BUILD YOUR OWN JIGS AND HOLD-DOWNS: The DCT Miter Track Slot Fixture Hardware 12-Piece Kit, 3/4" x 3/8 Inch Table Saw, Router, Disc Sander Feather Board Jig is a fast way to build jigs and anchor accessories like feather (finger) boards, circle guides, hold-downs, and special jigs to your miter gauge track
- VARIOUS APPLICATIONS: Use the miter gauge track on a table saw, router table, disc sander, or any other tool with a standard 3/4-inch wide x 3/8-inch deep miter gauge slot
- EASY TO USE: The bars pull up tight in the slot as you tighten the knobs; Simply slide it to where you want the fixture, and when you turn the knob it expands the metal to secure the bar in the slot; Bolts lock by expanding the miter bar; The tapered head of the screw spreads the bar open so it pushes into the sides
- BUILT TO LAST: All pieces are constructed from solid metal; The included plastic knobs have metal thread inserts for maximum strength and longevity
- CONTENTS: Package includes (1) aluminum extrusion stop T-nut, (1) aluminum extrusion pivot T-nut, (2) 1/4-inch triangle thru knobs, (2) 1/4-inch flat head screws, (1) 1/4-inch hex set screw, (2) washers, (1) 1/8-inch Allen wrench hex key, (1) plastic space, and (1) 4mm x 20mm self-tapping screw; Miter track required, not included
- See more on Amazon...
Brand: Deadwood Crafted Tools | Manufacturer: Deadwood Crafted Tools
Dimensions: 5.35 x 1.10 x 6.80 Inches | Weight: 0.22 Pounds
Warranty: This product has a manufacturer warranty against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase. See our Seller Return Policy for more details.
See On Amazon #16
Micro Jig MB-050-0525PL Zeroplay 1/2" X 14" 2-Step Plunge Router Bit (1/2" Shank) (R7a)
Asin: B0BYTKF28T | Model: MB-050-0525PL | PartNumber: MB-050-0525PL | Ean: 0815267011542 | UPC: 815267011542
Dual Functionality: Use In A Drill Press For Counterbored Holes Or A Router Table For Seamless Stepped Slots Compatible With Numerous Hardware Types..
Stress-Free Plunge Router Bit: Enjoy Our Exceptional Customer Service, Ensuring A Hassle-Free Experience With Speedy Resolutions..
Boost Your Efficiency: Quickly Create Custom Jigs With This Innovative Addition To The Microjig Zeroplay Lineup..
Patented Radius Flair: Experience Smooth, Visually Appealing Holes And Slots With Microjig's Unique Design..
Eliminate Guesswork: Streamline Drilling And Counterboring With Accurate Mounting Holes For Zeroplay Screws In Materials Up To 1" Thick..
Features
- Precision Milling: Effortlessly create the perfect fit for ZEROPLAY, MATCHFIT, and various other hardware.
- Eliminate Guesswork: Streamline drilling and counterboring with accurate mounting holes for ZEROPLAY screws in materials up to 1 thick.
- Dual Functionality: Use in a drill press for counterbored holes or a router table for seamless stepped slots compatible with numerous hardware types.
- Patented Radius Flair: Experience smooth, visually appealing holes and slots with Microjig's unique design.
- Stress-Free Plunge Router Bit: Enjoy our exceptional customer service, ensuring a hassle-free experience with speedy resolutions.
- Boost Your Efficiency: Quickly create custom jigs with this innovative addition to the Microjig ZeroPlay lineup.
- See more on Amazon...
Brand: MICRO JIG | Manufacturer: Microjig
Dimensions: 1.90 x 3.60 x 1.90 inches
Warranty: Extended 3-Year Warranty from Authorized Resellers
See On Amazon #17
Precision Miter Gauge for Table Saw, Standard Slot 3/4x 3/8, Table Saw Miter Gauge Fence System Includes Aluminum Miter Fence, Repetitive Cut Flip Stop for Woodworking Tools
Asin: B0CKVLG2CF | Model: Focketyep2u4ax1vt | PartNumber: Focketyep2u4ax1vt
Flexible Locking: Miter Gauge Angle Blocks Enable Accurate Incremental Control. The Locking Mechanism Allow The Rotating Part To Be Locked At Any Angle.
With Fittings: Table Saw Miter Gauge Fence System Is Equipped With Push Table Handle, Limit Block, Wrench, Screws, Nuts, And Other Fittings, Easy For You To Install And Use, Complete Accessories Guarantees Convenient Operation.
Applicable Track: Table Saw Miter Gauge System Is Applicable To 30Mm Or 45Mm T Track, Very Versatile.
High Accuracy: The Miter Gauge Fence System Is Accurate, Well Built And Suitable For Professional Use, Providing Extremely High Bevel Accuracy.
Features
- DURABLE ALUMINUM ALLOY: Made of excellent aluminum alloy, this miter rod has great strength and reliable durability and can be used for years without being abused
- HIGH ACCURACY: The miter gauge fence system is accurate, well built and suitable for professional use, providing extremely high bevel accuracy
- FLEXIBLE LOCKING: Miter gauge angle blocks enable accurate incremental control. The locking mechanism allow the rotating part to be locked at any angle
- APPLICABLE TRACK: Table saw miter gauge system is applicable to 30mm or 45mm T track, very versatile
- WITH FITTINGS: Table saw miter gauge fence system is equipped with push table handle, limit block, wrench, screws, nuts, and other fittings, easy for you to install and use, complete accessories guarantees convenient operation
- See more on Amazon...
Brand: Fockety | Manufacturer: Fockety
See On Amazon #18
FTVOGUE Aluminium Alloy Miter Bar Slider Table Saw Miter Gauge Rod Wood Woodworking Tool (450mm/17.71inch)
Asin: B07H3W1Y94 | Ean: 0798382658116 | UPC: 798382658116
Adjustable Stainless Steel Runner For Perfect Sliding Action. For Building Various Jigs On Your Table Saw, Like Miter Sleds Etc..
These Rockler Miter Bar Easily In The Miter Slot When Adjusted Well, There Is No Side To Side Movement At All Which Makes For Very Accurate Cuts..
Miter Slot Bar Is Easy To Assemble, Making It Very Easy To Construct That Ideal Jig Without Dealing With The Wood Runners And The Swelling Issues..
This Is A Miter Bar Usually Used In Table Saw Woodworking Works .Universal Threaded Mounting Holes For Convenient Use..
Features
- This miter rod is made of high quality aluminium alloy, miter bar is of strong strength and reliable durability for several year using without abusing.
- This is a miter bar usually used in table saw woodworking works .Universal threaded mounting holes for convenient use.
- Adjustable stainless steel runner for perfect sliding action. For building various jigs on your table saw, like miter sleds etc.
- Miter slot bar is easy to assemble, making it very easy to construct that ideal jig without dealing with the wood runners and the swelling issues.
- These rockler miter bar easily in the miter slot when adjusted well, there is no side to side movement at all which makes for very accurate cuts.
- See more on Amazon...
Brand: FTVOGUE | Manufacturer: FTVOGUE
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.49 Pounds
See On Amazon #19
MICROJIG FITFINDER 1/2 Gauge and (R9A) 3/4" Lock Miter Bit with Center Index (1/2" shank) Bundle
Asin: B0CHBK9FQH | Model: FN12+MB-050-0750LM | PartNumber: FN12+MB-050-0750LM | Ean: 0815267011917 | UPC: 815267011917
Set Fences And Transfer Cutting Depths Instantly For A Versatile Tool In Your Workshop..
Center Quickly: Fitfinder Lock Miter Bit, Compatible With Fitfinder 1/2 Gauge, Is Always Centered On The Stock Thickness, And Only Our Fitfinder Bit Has A Center Point Milled Into The Body For Easy Measurement. Fitfinder 1/2 Gauge Sold Separately..
Faster Setup: Patent Pending Center Finding Platform And Router Collet Safety Line Make Fitfinder Lock Miter Bit A Breeze To Set Up Accurately, No Matter Your Skill Level..
Use The Fitfinder To Center Stock On The Lathe And Center Router Bits For Quick And Accurate Results..
Precision Reimagined: Fitfinder Lock Miter Bit's Unique Center-Finding Platform Streamlines Setup, Assures Perfect Joints, And Eliminates Guesswork, Leaving You To Master Your Craft..
Enjoy Fast Setup With No Math Or Measuring, Thanks To The Sliding Depth Gauge That Automatically Slides Down To The Exact 1/2 Way Mark Of Your Work Material..
Better Fitting Joints: Unique Built-In "Glue Wells" Ensure A Tighter Joint Fit. Using A Small Slot Within Each Groove So Excess Glue Does Not Block The Joints From Closing Fully. Fewer Clamps Are Needed, And Rock-Solid Joints Are Achieved..
Create Perfect-Fitting Joints With Zero Guesswork, Making It Easy To Lock In The Measurement And Transfer To The Router Or Table Saw For Flawless Lap Joints..
Features
- Find the 1/2 thickness of material in seconds with the FITFINDER 1/2 Gauge by MICROJIG.
- Create perfect-fitting joints with zero guesswork, making it easy to lock in the measurement and transfer to the router or table saw for flawless lap joints.
- Set fences and transfer cutting depths instantly for a versatile tool in your workshop.
- Enjoy fast setup with no math or measuring, thanks to the sliding depth gauge that automatically slides down to the exact 1/2 way mark of your work material.
- Use the FITFINDER to center stock on the lathe and center router bits for quick and accurate results.
- Precision Reimagined: FITFINDER Lock Miter Bit's unique Center-Finding Platform streamlines setup, assures perfect joints, and eliminates guesswork, leaving you to master your craft.
- Center Quickly: FITFINDER Lock Miter Bit, compatible with FitFinder 1/2 Gauge, is always centered on the stock thickness, and only our FITFINDER bit has a center point milled into the body for easy measurement. FitFinder 1/2 Gauge sold separately.
- Faster Setup: Patent Pending Center Finding Platform and Router Collet Safety Line make FITFINDER Lock Miter Bit a breeze to set up accurately, no matter your skill level.
- Better Fitting Joints: Unique built-in Glue Wells ensure a tighter joint fit. Using a small slot within each groove so excess glue does not block the joints from closing fully. Fewer clamps are needed, and rock-solid joints are achieved.
- See more on Amazon...
Brand: MICRO JIG | Manufacturer: MIcrojig
Dimensions: 6.00 x 3.00 x 7.00 Inches
See On Amazon
Looking For Something Else?
Search