ASNOMY 4 Inch Forstner Drill Bit, Carbide Tipped Forstner Bit for Hard Wood, Wood Drilling Hole Saw Set Woodworking Hinge Cutter Tool Kits for Wood Plastic Plywood
Asin: B0BHC8FJGD | Ean: 0725576864725 | UPC: 725576864725
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Size】Drilling Diameter: 4Inch , Hex Shank Dia.: 2/5Inch(10Mm) , Drilling Depth: 2-3/8Inch(60Mm), Total Length: 3-9/16Inch (90Mm)..
【Widely Applications】Can Be Used For Drilling Holes On On Wood And Plastic Products, Furniture, Door Hinge, Desk. Used On Cutting Wood, Plywood, Solid Wood Boards, Mdf, Plastics, Etc..
【 Sharp & Clean Holes】This Tct (Tungsten Carbide Tipped Cutters)Forstner Bit Set Perfect For Hard Wood, Can Drill Precise Flat Bottom Holes With No Chipping In Hard Wood Or Soft Wood.(Drilling Depth Up To 2-3/8Inch).
【Top Quality】Made From High Quality Tungsten Carbide Tipped Cutters, Solid Hardened Steel Body, Ensuring Its High Hardness, Rust Proof, Sturdy And Durable；.
Features
- Warm Tips For large-size Forstner drill bits ( 60mm), it is best to use machines with good fixation performance for drilling operations, such as drill presses, bench drills, vertical drill presses and vertical electric drills, etc. If you must use a hand electric drill to operate , be sure to use a high-power electric hand drill, and it is best to use it with a vise with good fixation effect. Otherwise, good hole opening effect will not be achieved.
- Top Quality Made from high quality Tungsten Carbide Tipped Cutters, solid hardened steel body, ensuring its high hardness, rust proof, sturdy and durable
- Size Drilling diameter: 4Inch , Hex Shank Dia.: 2/5Inch(10mm) , Drilling depth: 2-3/8Inch(60mm), Total length: 3-9/16Inch (90mm).
- Sharp & Clean Holes This TCT (Tungsten Carbide Tipped Cutters)Forstner bit set perfect for hard wood, can drill precise flat bottom holes with no chipping in Hard Wood or soft wood.(drilling depth up to 2-3/8Inch)
- Widely Applications Can be used for drilling holes on on wood and plastic products, furniture, door hinge, desk. Used on cutting wood, plywood, solid wood boards, MDF, plastics, etc.
- See more on Amazon...
Brand: ASNOMY | Manufacturer: ASNOMY
See On Amazon Similar To ASNOMY 4 Inch Forstner Drill
#1
Irwin Tools IRWIN Marples Forstner Bit Set, Wood Drilling, 8 Piece (1966892)
Asin: B07145HBPL | Model: 1966892 | PartNumber: 1966892 | Ean: 0042526943546 | UPC: 042526943546
Significantly Reduces Cutting Time Compared With Traditional Forstner Bits.
Set Includes 1/4" (6.3Mm), 3/8" (9.5Mm), 1/2" (12.7Mm), 5/8" (15.8Mm), 3/4" (19.0Mm), 7/8" (22.2Mm), 1" (25.4Mm), 1-3/8" (34.9Mm) Forstner Bits.
Reduced Shank Fits 3/8" And Larger Drills And Drill Presses.
Features Optimized Ultra-Sharp Cutting Teeth Specifically Engineered To Cut Through Hard And Soft Woods Smoothly And Efficiently.
Features
- Easily drills high-quality flat-bottomed and pocket holes
- Features optimized ultra-sharp cutting teeth specifically engineered to cut through hard and soft woods smoothly and efficiently
- Significantly reduces cutting time compared with traditional forstner bits
- Reduced shank fits 3/8 and larger drills and drill presses
- Set includes 1/4 (6.3mm), 3/8 (9.5mm), 1/2 (12.7mm), 5/8 (15.8mm), 3/4 (19.0mm), 7/8 (22.2mm), 1 (25.4mm), 1-3/8 (34.9mm) forstner bits
- See more on Amazon...
Brand: IRWIN | Manufacturer: Irwin Tools
Dimensions: 2.50 x 9.70 x 9.60 Inches | Weight: 1.84 pounds
Warranty: CN
See On Amazon #2
IRWIN Marples Forstner Bit Set, Wood Drill Bits, Made of Carbon Steel, Ideal for Fine Woodworking, Cabinet-making and more, 14 Pieces (1966893)
Asin: B071S1BGXV | Model: 1966893 | PartNumber: 1966893 | Ean: 7412822741079, 0042526943553 | UPC: 042526943553
Significantly Reduces Cutting Time Compared With Traditional Forstner Bits.
Reduced Shank Fits 3/8" And Larger Drills And Drill Presses, 1-1/2" (38.1Mm), 1-5/8" (41.2Mm), 2" (50.8Mm) Forstner Bits.
Features Optimized Ultra-Sharp Cutting Teeth Specifically Engineered To Cut Through Hard And Soft Woods Smoothly And Efficiently.
Features
- Easily Drills High-Quality Flat-Bottomed And Pocket Holes
- Features Optimized Ultra-Sharp Cutting Teeth Specifically Engineered To Cut Through Hard And Soft Woods Smoothly And Efficiently
- Significantly Reduces Cutting Time Compared With Traditional Forstner Bits
- Reduced Shank Fits 3/8 And Larger Drills And Drill Presses, 1-1/2 (38.1Mm), 1-5/8 (41.2Mm), 2 (50.8Mm) Forstner Bits
- See more on Amazon...
Brand: IRWIN | Manufacturer: Irwin Tools
Dimensions: 11.50 x 3.20 x 11.60 Inches | Weight: 0.00 Pounds
Warranty: CN
See On Amazon #3
KENDO 8 Piece Forstner Bit Set, Made of Alloy Steel, Forstner Bits for Woodworking, Auger Opener Round Shank Drilling Cutting Tool for Hardwood, Softwood, Plastic, Plywood with Storage Case
Asin: B0CM9CB4QN
Size: Kendo Forstner Bit Set Includes: 1/4" (6.3Mm), 3/8" (9.5Mm), 1/2" (12.7Mm), 5/8" (15.8Mm), 3/4" (19.0Mm), 7/8" (22.2Mm), 1" (25.4Mm), 1-3/8" (34.9Mm) Forstner Bits..
Quality Commitment: If You Are Not Satisfied With Your Purchase For Any Reason, Please Contact Us. We Provide A 30-Day Money-Back Guarantee. We Guarantee 100% Satisfaction For Risk-Free Shop..
Widely Applicable: The Forstner Bits Are Suitable For Wood Processing, Industrial Hinge Installation, Model Production, Installation Of Spherical Doors, Drawers, And Other Occasions, And You Can Also Make Delicate Perforations In This Material..
Efficient Cutting: Our Drill Has The Features Of Ultra-Sharp Cutting Teeth, Which Reduce Cutting Time Significantly Compared To Traditional Forstner Bits, Enabling You To Easily Drill High-Quality Flat-Bottomed And Pocket Holes..
Features
- HIGH-QUALITY MATERIAL: The Forstner bits are made of alloy steel and have been heat-treated. The material ensures toughness and good resistance to shock, reducing cutting time.
- EFFICIENT CUTTING: Our drill has the features of ultra-sharp cutting teeth, which reduce cutting time significantly compared to traditional forstner bits, enabling you to easily drill high-quality flat-bottomed and pocket holes.
- SIZE: KENDO Forstner bit set includes: 1/4 (6.3mm), 3/8 (9.5mm), 1/2 (12.7mm), 5/8 (15.8mm), 3/4 (19.0mm), 7/8 (22.2mm), 1 (25.4mm), 1-3/8 (34.9mm) Forstner bits.
- WIDELY APPLICABLE: The Forstner bits are suitable for wood processing, industrial hinge installation, model production, installation of spherical doors, drawers, and other occasions, and you can also make delicate perforations in this material.
- QUALITY COMMITMENT: If you are not satisfied with your purchase for any reason, please contact us. We provide a 30-day money-back guarantee. We guarantee 100% satisfaction for risk-free shop.
- See more on Amazon...
Brand: Kendo | Manufacturer: KENDO
See On Amazon #4
INTOO Hex Shank Forstner Bit Set 16 pcs Multi Sided Shank Wood Drill bit Set
Asin: B0894RWLGK | Ean: 0791265838513 | UPC: 791265838513
③Great Performance: Easily Make Flat-Bottomed And Pocket Holes With No Chipping On Any Wood Or Wood Products, Plastic, Polywood And Other Materials During Processing Or Installation..
⑤Application: 3/8" Reduced Shank Fits Any Electric Power Machines And Drill Presses..
④High Quality: Good Material Assures Toughness And Good Resistance To Shock,Reduces Cutting Time..
②Features: Hex Shank Is Easy To Install And Tighten ,Prevent The Bit From Slipping. Extra Sharp Cutting Spurs Is Especially Designed For Cutting Through Hard And Soft Wood Or Other Materials Smoothly And Efficiently..
Features
- Specifications: 16 PCS includes 1/4" (6.3mm), 3/8" (9.5mm), 1/2" (12.7mm), 5/8" (15.8mm), 3/4" (19.0mm), 7/8" (22.2mm), 1" (25.4mm), 1-1/8" (28.5mm), 1-1/4" (31.7mm), 1-3/8" (34.9mm) 1-1/2 38.1mm), 1-5/8(41.28mm), 1-3/4(44.45mm), 1-7/8(47.63mm), 2(50.8mm) and 2-1/8(53.98mm) forstner bits
- Features: Hex Shank is easy to install and tighten ,prevent the bit from slipping. Extra sharp cutting spurs is especially designed for cutting through hard and soft wood or other materials smoothly and efficiently.
- Great Performance: Easily make flat-bottomed and pocket holes with no chipping on any wood or wood products, plastic, polywood and other materials during processing or installation.
- High Quality: Good material assures toughness and good resistance to shock,reduces cutting time.
- Application: 3/8 reduced shank fits any electric power machines and drill presses.
- See more on Amazon...
Brand: INTOO | Manufacturer: Linrui Tools
See On Amazon #5
Yougfin 4 inch 102mm Hole Saw, Bi-Metal HSS Hole Cutter with Hex Shank Drill Bit Adapter for Cornhole Boards, Metal, Drywall, Plasterboard, Wood and Plywood
Asin: B0B3X44C39 | Model: Hole saws-2 | PartNumber: Hole saws-2
【Wide Application】: A Good Bi-Metal Hole Saw Will Easily Cut Through Softer Materials, Such As Plastic And Wood-Based Items, As Well As Harder Materials, Such As Wood, Plywood, Plastic, Drywall, Soft Plaster, Cornhole Boards And Thin Metals.
【Intimate Service】： To Ensure The Safety Of You, Pls Wear All Applicable Safety Supplies When Using These Hole Saws. If You Have Any Questions About Yougfin Products, Please Feel Free To Contact Us. Our Aim Is To Provide You With Quality Service At Any Time.
【Suitable Size】: Cutting Diameter:4 Inch(102Mm);Shank Diameter : 10Mm(0.39Inch). Please Keep The Drill Bit In Contact With The Cutting Surface Straight At A Low Speed. Take Some Time For The Saw To Cut, So You Can Get A Smooth And Clean Round Cut.
【Efficient & Smooth Cutting】： Hole Saws Are Cylindrical Cups With A Serrated Edge To Cut Various Sizes Of Holes In A Variety Of Materials. The Serrated Edge Is Designed To Cut The Hole; The Other End Is Designed To Be Driven By An Arbor.Yougfin's Hole Saw Design Features Wide, Angled And Offset Slots To Easily Access And Remove Plugs From The Cup.
Features
- High Performance Material Forged from bi-metal and M42 High Speed Steel.Most users prefer a bi-metal hole saw for the majority of their work because it is compatible with a wide variety of materials.High speed steel is used on the outer edge due to its wear resistance properties and forms the cutting edge of the teeth
- Efficient & Smooth Cutting Hole saws are cylindrical cups with a serrated edge to cut various sizes of holes in a variety of materials. The serrated edge is designed to cut the hole; the other end is designed to be driven by an arbor.Yougfin's hole saw design features wide, angled and offset slots to easily access and remove plugs from the cup
- Wide Application : A good bi-metal hole saw will easily cut through softer materials, such as plastic and wood-based items, as well as harder materials, such as wood, plywood, plastic, drywall, soft plaster, cornhole boards and thin metals
- Suitable Size : Cutting Diameter:4 inch(102mm);Shank Diameter : 10mm(0.39inch). Please keep the drill bit in contact with the cutting surface straight at a low speed. Take some time for the saw to cut, so you can get a smooth and clean round cut
- Intimate Service To ensure the safety of you, pls wear all applicable safety supplies when using these hole saws. If you have any questions about Yougfin products, please feel free to contact us. Our aim is to provide you with quality service at any time
- See more on Amazon...
Brand: Yougfin | Manufacturer: Yougfin
Dimensions: 0.04 x 4.00 x 4.00 Inches
See On Amazon #6
CORTOOL Forstner Bit Set 16Pcs Hex Shank, Wood Drill Bits Set with Multi Sided Shank
Asin: B09W23HHXN | Model: 48600008 | PartNumber: 48600008 | Ean: 6939025689171
✅ Great Performance: Easily Make Flat-Bottomed And Pocket Holes With No Chipping On Any Wood Or Wood Products, Plastic, Polywood And Other Materials During Processing Or Installation..
✅ Application: Hex Shank Fits Any Electric Power Machines And Drill Presses..
✅ High Quality: Good Material Assures Toughness And Good Resistance To Shock,Reduces Cutting Time..
✅ Features: 3/8" Hex Shank Is Easy To Install And Tighten ,Prevent The Bit From Slipping. Extra Sharp Cutting Spurs Is Especially Designed For Cutting Through Hard And Soft Wood Or Other Materials Smoothly And Efficiently..
Features
- Specifications: 16PCS includes 1/4" (6.3mm), 3/8" (9.5mm), 1/2" (12.7mm), 5/8" (15.8mm), 3/4" (19.0mm), 7/8" (22.2mm), 1" (25.4mm), 1-1/8" (28.5mm), 1-1/4" (31.7mm), 1-3/8" (34.9mm) 1-1/2 38.1mm), 1-5/8(41.28mm), 1-3/4(44.45mm), 1-7/8(47.63mm), 2(50.8mm) and 2-1/8(53.98mm) forstner bits
- Features: 3/8 Hex Shank is easy to install and tighten ,prevent the bit from slipping. Extra sharp cutting spurs is especially designed for cutting through hard and soft wood or other materials smoothly and efficiently.
- Great performance: Easily make flat-bottomed and pocket holes with no chipping on any wood or wood products, plastic, polywood and other materials during processing or installation.
- High quality: Good material assures toughness and good resistance to shock,reduces cutting time.
- Application: Hex shank fits any electric power machines and drill presses.
- See more on Amazon...
Brand: Cortool | Manufacturer: Cortool
Weight: 1.00 Pounds
See On Amazon #7
Rannb Hole Saw 4-inch Dia Hole Cutting Drill Bit for Drilling Holes in Wood, Plastic, Drywall, Thin Metal
Asin: B08NSY9NM9 | Model: wby2684 | PartNumber: wby2684
【Application】 This Hole Saw Drill Bit Is Designed For Cutting Solid Board, Compressed Plate, Plasterboard, Plastic And Etc. Good For Home Projects..
【Spring Loaded Design】The Spring On The Drill Bit Is Nice Because It Automatically Pushes The Disc Out Of The Saw Immediately After Completing The Hole..
【Sharp Teeth】The Teeth Is Sharp And Vibarition Is Less, Which Enable More Stable Operation And Make The Hole Can Be Cut With Quick Speed And Balance..
【Dimension】Cutting Dia: 4"/102Mm; Shank Diameter : 10Mm / 0.4";Cutting Depth : 25Mm /1".
Features
- Material The hole saw is made of BI-metal that is durable and tough.
- Dimension Cutting Dia: 4/102mm; Shank Diameter : 10mm / 0.4;Cutting Depth : 25mm /1
- Application This Hole Saw Drill Bit is designed for cutting solid board, compressed plate, plasterboard, plastic and etc. Good for home projects.
- Sharp Teeth The teeth is sharp and vibarition is less, which enable more stable operation and make the hole can be cut with quick speed and balance.
- Spring Loaded Design The spring on the drill bit is nice because it automatically pushes the disc out of the saw immediately after completing the hole.
- See more on Amazon...
Brand: Rannb | Manufacturer: Rannb
Dimensions: 0.04 x 4.02 x 3.86 Inches
See On Amazon #8
VEVOR Forstner Bit Set, 16 Pcs Forstner Drill Bits Set, 1/4" to 1-5/8", Carbon Steel, with Universal Round Shank, Forstner Drill Bit for Wood and Composite Board, Forstner Bits for Woodworking
Asin: B0CFLKZKHS | Model: 1 | PartNumber: 1 | Ean: 0840349948669 | UPC: 840349948669
Outstanding Performance In Action: Our Forstner Bit Set For Wood Features An Irregular Clamping Handle Design That Ensures Stability And Prevents Slippage During Drilling. Say Goodbye To Frustrating Slips, And Hello To A Secure Grip!.
Compatible With Various Tools: Our Forstner Drill Bit Is Designed To Seamlessly Integrate With Popular Drilling Equipment Such As Drill Press, Pistol Drill, Bench Drill, Vertical Drill Press, Handheld Electric Drill, Vertical Electric Drill Press, Etc..
Wide Application: From Softwoods To Hardwoods, Veneers, And Non-Laminated Chipboard, Our Forstner Bits For Woodworking Are Your Go-To Tool For A Wide Range Of Drilling Applications..
Powerful Alloy Steel Drill Bits: Unleash The Drilling Potential With Our Premium-Grade Alloy Steel Forstner Bit. Enjoy Precise Center Positioning And Effortless Cutting Abilities, Making Any Boring Or Cutting Task A Breeze..
Features
- High-Quality Alloy Technology: Experience the exceptional craftsmanship of our forstner bit set. It is designed with premium metal material and a double quenching process, breaking through technological barriers for a hardcore upgrade. Overall hardness increased by 22%, and the drilling count increased by 15% compared to the original.
- Powerful Alloy Steel Drill Bits: Unleash the drilling potential with our premium-grade alloy steel forstner bit. Enjoy precise center positioning and effortless cutting abilities, making any boring or cutting task a breeze.
- Outstanding Performance in Action: Our forstner bit set for wood features an irregular clamping handle design that ensures stability and prevents slippage during drilling. Say goodbye to frustrating slips, and hello to a secure grip!
- Wide Application: From softwoods to hardwoods, veneers, and non-laminated chipboard, our forstner bits for woodworking are your go-to tool for a wide range of drilling applications.
- Compatible with Various Tools: Our forstner drill bit is designed to seamlessly integrate with popular drilling equipment such as drill press, pistol drill, bench drill, vertical drill press, handheld electric drill, vertical electric drill press, etc.
- See more on Amazon...
Brand: VEVOR | Manufacturer: VEVOR
Dimensions: 2.50 x 11.20 x 8.80 inches | Weight: 3.57 Pounds
See On Amazon #9
IVY Classic 46152 4-Inch Forstner Bit Extension, High Carbon Steel, 1/Tube
Asin: B0052IPPBY | Model: 46152 | PartNumber: 46152 | Ean: 0738226461526 | UPC: 738226461526
High-Carbon Steel Construction, Precision Ground And Polished.
Shank: 3/8-Inch, Length: 4-Inch.
Two Set Screws And Hex Key Included. To Fasten The Shank In Place, Use The Hex Key To Tighten These Screws.
Ideal For Use With Any 3/8" Shank Bit.
Features
- Extends any Forstner shank bit an additional 4 inches, Swift Bore (Registered Trademark)
- Ideal for use with any 3/8 shank bit
- High-carbon steel construction, precision ground and polished
- Two set screws and hex key included. To fasten the shank in place, use the hex key to tighten these screws
- Shank: 3/8-inch, length: 4-inch
- See more on Amazon...
Brand: IVY Classic | Manufacturer: IVY Classic Industries
Dimensions: 0.63 x 4.00 x 0.63 Inches | Weight: 0.03 pounds
See On Amazon #10
Fulton 6 inch Long Forstner Bit Extension for Adding Over 5-5/8 inches of Drilling Depth to Your Forstner Bit. for Wood Turners, Furniture, Carpentry and Construction
Asin: B003UO7Y98 | Model: 927 | PartNumber: 927 | Ean: 0810948014492 | UPC: 810948014492
One Of The Most Common Uses For The Forstner Bit Extension Is For Woodturners Who Need To Bore Out Starter Holes On Larger Vessels. However, The Extension Works Exceptionally Well For Projects Like Salt Shakers, Pepper Mills Or Even Wood Turned Beverage Mugs. Contractors Use The Extension When They Need To Bore Deep Holes For Running Cables Or Wires And They Also Use It For Joining Larger Timbers..
The Collet Outside Diameter Is 25/32 Inch Without The Set Screws Protruding Outward. The Reason This Is Important Is That As We Mentioned Earlier, Some Bits May Have Slightly Different Shank Sizes. This Means The Set Screws May Protrude Outwardly From The Collet. The Minimum Size Hole This Extension Will Allow You To Drill Is 13/16 Inch. Forstner Bits And Machinery Shown In Pictures Are Not Included..
The Forstner Bit Extender Is Made From Solid, Heavy Duty Machined Steel. It Is Designed To Be Used With Forstner Bits Only. The Collet Inside Diameter Is 3/8 Inch. This Tolerance Is Very Tight And Designed To Accept Forstner Bits With Shank Sizes Of 3/8 Inch Or Slightly Smaller. Please Note That Some Forstner Bit Manufacturers Produce Bits That Say 3/8 Inch Shank Size When In Fact They Are Not. If You Measure Your Bit Shank And It Is 3/8 Inch, Your Bit Should Fit Once The Set Screws Are Loosened.
The Forstner Bit Extension Gives You Additional 5-5/8 Inches Of Reach To Bore Deeper Into Your Projects. This Will Help You Create Larger Diameter Starter Holes Or Help When You Need To Drill In Just A Little Further Than The Standard Bit Length Will Allow. The Extension Can Be Used With Forstner Bits On Drill Presses, Lathes With A Drill Chuck Installed (Drill Chuck Not Included) Or With A Power Drill..
Features
- Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed a heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet.
- The forstner bit extension gives you additional 5-5/8 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill.
- One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers.
- The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. The collet inside diameter is 3/8 inch. This tolerance is very tight and designed to accept forstner bits with shank sizes of 3/8 inch or slightly smaller. Please note that some forstner bit manufacturers produce bits that say 3/8 inch shank size when in fact they are not. If you measure your bit shank and it is 3/8 inch, your bit should fit once the set screws are loosened
- The collet outside diameter is 25/32 inch without the set screws protruding outward. The reason this is important is that as we mentioned earlier, some bits may have slightly different shank sizes. This means the set screws may protrude outwardly from the collet. The minimum size hole this extension will allow you to drill is 13/16 inch. Forstner bits and Machinery shown in pictures are NOT included.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools and Accessories
See On Amazon #11
Forstner Bit Set, Wood Drilling, w/Carbide Tipped 14 Piece Set by KOWOOD
Asin: B08J2MYTMG | Model: MK-02 | PartNumber: MK-02 | Ean: 0779296410403 | UPC: 779296410403
Kowood Forstner Bit Set Designed: Ideal For Pocket Holes, Overlapping Holes, And Holes At The Edge.
Precision Control: Shank Style Reduces Runout For More Precise Holes.
Accurate & Clean Holes: Fine Kerf Teeth Improve Accuracy And Deliver Clean, Smooth Results.
Kowood C2 Carbide: This Forstner Bit Set Tipped Carbide Is More Stable, Durable, And Smooth Compare With Hss.
Features
- 14 PCS Forstner Bit Set Specifications: 1/4"(6.35mm)*2, 3/8"(9.52mm), 1/2"(12.7mm), 5/8"(15.9mm), 3/4"(19.05mm), 7/8"(22.2mm), 1"(25.4mm), 1-1/8"(28.6mm), 1-1/4"(31.75mm), 1-3/8"(34.9mm), 1-1/2"(38.1mm), 1-5/8"(41.2mm), 2"(50.88mm)
- Kowood C2 Carbide: This forstner bit set tipped Carbide is more stable, durable, and smooth compare with HSS
- Kowood forstner bit set designed: Ideal for pocket holes, overlapping holes, and holes at the edge
- Accurate & Clean holes: Fine kerf teeth improve accuracy and deliver clean, smooth results
- Precision control: Shank style reduces runout for more precise holes
- See more on Amazon...
Brand: KOWOOD | Manufacturer: KOWOOD
Weight: 1.00 pounds
See On Amazon #12
IRWIN Marples Forstner Bit, Wood Drilling, 1-Inch (1966900)
Asin: B01JIKCRPI | Model: 1966900 | PartNumber: 1966900 | Ean: 0042526943621 | UPC: 042526943621
Easily Drills High-Quality Flat-Bottomed And Pocket Holes With A Fine, Smooth Finish.
Ideal For Fine Woodworking, Cabinet-Making, And More.
Reduced Shank Fits 3/8" And Larger Drills And Drill Presses.
Features Optimized Ultra-Sharp Knife Edge Design Specifically Engineered To Cut Through Hard And Soft Woods Smoothly And Efficiently.
Features
- Drills flat-bottomed and pocket holes in significantly less time than traditional Forstner bits
- Features optimized ultra-sharp knife edge design specifically engineered to cut through hard and soft woods smoothly and efficiently
- Easily drills high-quality flat-bottomed and pocket holes with a fine, smooth finish
- Reduced shank fits 3/8 and larger drills and drill presses
- Ideal for fine woodworking, cabinet-making, and more
- See more on Amazon...
Brand: IRWIN | Manufacturer: Newell Brands
Dimensions: 6.75 x 1.60 x 3.75 Inches | Weight: 0.19 pounds
See On Amazon #13
ASNOMY Tungsten Carbide Tipped Hole Saw Drill Bit for Hard Metal, 4 Inch T.C.T Hole Saw Cutter with 2pcs Titanium-Plated Pilot Drill bit for Metal, Stainless Steel, Iron, Wood, Plastic
Asin: B09MT4YQSH | Ean: 0725576864183 | UPC: 725576864183
【Unique Three-Blade Design】 This Tct Hole Saw Teeth Designed With Three-Blade, Include Outer Blade, Middle Blade, And Inner Blade, Making It Sharper And More Efficient, Ideal For Cutting Hard Metals;.
【High Precision And Easy To Use】Tct Carbide Steel Teeth For Fast Cutting Of Clean, Round Holes. Suitable For Hand Held Electric Drill, Stand Motor-Driven Drilling Machine And Mobile Ribbon Type Magnetism Drilling Machine;.
【Package】Include 1Pc T.C.T Hole Saw Cutter And 2Pcs Titanium-Plated Pilot Drill Bit，Each Hole Cutters Are Individually Cased In Plastic Box And Each Bit Is Also Oiled (Prevent Rust)..
【Multipurpose Tools】This Carbide Hole Saw Set Apply To Bench Drill, Magnetic Drill, Gun Drill, Drill Percussion And So On. Perfect For Hard Metal, Stainless Steel Plate, Square Tube, Iron, Cast Iron, Wood, F.R.P And Other General Sheet Metal；Note: Cannot Be Used For Concrete, Tiles And Stone..
【Size】Cutting Diameter：4 Inch (101.6Mm), Cutting Depth: 1Inch, Shank Dia.: 2/5 Inch(10Mm) , Perfect For Drilling Hard Metal;.
Features
- Top Quality Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable
- Size Cutting diameter 4 Inch (101.6mm), Cutting Depth: 1Inch, Shank Dia.: 2/5 Inch(10mm) , perfect for drilling Hard Metal;
- Unique Three-blade Design This TCT hole Saw teeth designed with Three-blade, Include outer blade, middle blade, and inner blade, making it sharper and more efficient, ideal for cutting hard metals;
- Multipurpose Tools This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal Note: Cannot be used for concrete, tiles and stone.
- High precision and Easy to Use TCT Carbide Steel teeth for fast cutting of clean, round holes. Suitable for hand held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine;
- Package Include 1pc T.C.T Hole Saw Cutter and 2pcs Titanium-Plated Pilot Drill bit each hole cutters are individually cased in plastic box and each bit is also oiled (Prevent rust).
- See more on Amazon...
Brand: ASNOMY | Manufacturer: ASNOMY
See On Amazon #14
ASNOMY 6-11/16Inch Extra Long Forstner Bit Extension for Adding Over 5-3/8 inches of Drilling Depth to Your 3/8" & 2/5" Round or Hex Shafts Forstner Bit
Asin: B0CJTXS339
👷High-Carbon Steel Construction, Precision Ground And Polished, Ensuring It's Sturdy And Durable;.
👷Triangular Shank Dia.: 3/8-Inch, Total Length: 6-11/16 Inch, Extend Length: 5-3/8 Inch..
👷Two Set Screws And Hex Key Included. To Fasten The Shank In Place, Use The Hex Key To Tighten These Screws;.
👷The Collet Inside Diameter Is 2/5 Inch(10.5Mm). This Tolerance Is Very Tight And Designed To Accept Forstner Bits With Shank Sizes Of 2/5Inch, 3/8 Inch Or Slightly Smaller;.
Features
- Extends any Forstner shank bit an additional 5-3/8 inches, Helps you use standard forstner drill bits drilling for flat bottom holes or start deep hole turning projects like on larger vases or containers;
- The collet inside diameter is 2/5 inch(10.5mm). This tolerance is very tight and designed to accept forstner bits with shank sizes of 2/5inch, 3/8 inch or slightly smaller;
- High-carbon steel construction, precision ground and polished, ensuring it's sturdy and durable;
- Two set screws and hex key included. To fasten the shank in place, use the hex key to tighten these screws;
- Triangular Shank Dia.: 3/8-inch, Total length: 6-11/16 inch, Extend Length: 5-3/8 inch.
- See more on Amazon...
Brand: ASNOMY | Manufacturer: ASNOMY
See On Amazon #15
NICAVKIT 3 Inch Carbide Forstner Drill Bit, Carbide Tipped Forstner Bit for Hard Wood, Wood Drilling Bit Woodworking Hinge Cutter Tool Kits for Wood Plywood Plastic
Asin: B0C5QCXR86
【Product Size】Drilling Diameter：3Inch (76Mm), Hex Shank Dia.: 15/32Inch(12Mm) , Drilling Depth: 2-3/8Inch(60Mm), Total Length: 3-11/16Inch (93Mm)..
【Multipurpose Tools】Our Carbide Forstner Bit Can Be Widely Used For Drilling Holes On Wood, Plastic Products, Furniture, Door Hinge And Desk. Used On Cutting Wood, Plywood, Solid Wood Boards, Mdf, Plastics, Etc..
【High Effieiect & Smooth Holes】This Tct (Tungsten Carbide Tipped Cutters)Forstner Bit Set Perfect For Drilling Hard Wood, Can Easily Drill Precise Smooth Holes In Hard Wood Or Soft Wood.(Drilling Depth Up To 2-3/8Inch).
【Top Quality】This Forstner Bit Made From High Quality Tungsten Carbide Tipped Cutters, Solid Hardened Steel Body, Ensuring Its High Hardness, Rust Proof, Sharp And Durable；.
Features
- Warm Tips For large-size Forstner bits( 60mm), you must use machines with good fixed performance for drilling operations, such as drill presses, bench drills, vertical electric drills, etc. If you must use a hand drill for operation, you must use a high-power hand drill, and use a vise with a good fixed effect.
- Top Quality This Forstner bit made from high quality Tungsten Carbide Tipped Cutters, solid hardened steel body, ensuring its high hardness, rust proof, sharp and durable
- Product Size Drilling diameter 3Inch (76mm), Hex Shank Dia.: 15/32Inch(12mm) , Drilling depth: 2-3/8Inch(60mm), Total length: 3-11/16Inch (93mm).
- High Effieiect & Smooth Holes This TCT (Tungsten Carbide Tipped Cutters)Forstner bit set perfect for drilling hard wood, can easily drill precise Smooth holes in Hard Wood or soft wood.(drilling depth up to 2-3/8Inch)
- Multipurpose Tools Our Carbide forstner Bit can be widely used for drilling holes on wood, plastic products, furniture, door hinge and desk. Used on cutting wood, plywood, solid wood boards, MDF, plastics, etc.
- See more on Amazon...
Brand: NICAVKIT | Manufacturer: NICAVKIT
Weight: 0.22 pounds
See On Amazon #16
GMTOOLS Forstner Bit Set, 16PCS Forstner Drill Bits for Wood, Carbide Forstner Bit for Woodworking, Auger Opener Round Shank Drilling Cutting Tool for Hardwood, Softwood, Plastic, Plywood
Asin: B0CJHVF25Q
Size: 1/4" (6.3Mm), 3/8" (9.5Mm), 1/2" (12.7Mm), 5/8" (15.8Mm), 3/4" (19.0Mm), 7/8" (22.2Mm), 1" (25.4Mm), 1-1/8" (28.5Mm), 1-1/4" (31.7Mm), 1-3/8" (34.9Mm)，1-1/2（38.1Mm), 1-5/8(41.28Mm), 1-3/4(44.45Mm), 1-7/8(47.63Mm), 2(50.8Mm) And 2-1/8(53.98Mm).
Quality Commitment: If You Are Not Satisfied With Your Purchase For Any Reason, Please Contact Us. We Provide 30-Day Money Back. 100% Satisfaction Guarantee For Risk-Free Shopping!.
Widely Application: The Forstner Bit Set Is Fit For Pistol Drill, Bench Drill, Vertical Drilling, Machine Hand-Held Electric Drill, Stand Motor-Driven Drilling Machine And Mobile Ribbon Type Magnetism Drilling Machine..
Efficient Cutting: The Forstner Bits Are Suitable For Wood Processing, Industrial Hinge Installation, Model Production, Installation Of Spherical Doors, Drawers, And Other Occasions. You Can Make Delicate Perforations In This Materials..
Features
- HIGH QUALITY: The Forstner bits are made of carbon steel and being hot-treated. The material assures toughness and good resistance to shock and reduces cutting time.
- EFFICIENT CUTTING: The Forstner bits are suitable for wood processing, industrial hinge installation, model production, installation of spherical doors, drawers, and other occasions. You can make delicate perforations in this materials.
- SIZE: 1/4 (6.3mm), 3/8 (9.5mm), 1/2 (12.7mm), 5/8 (15.8mm), 3/4 (19.0mm), 7/8 (22.2mm), 1 (25.4mm), 1-1/8 (28.5mm), 1-1/4 (31.7mm), 1-3/8 (34.9mm) 1-1/2 38.1mm), 1-5/8(41.28mm), 1-3/4(44.45mm), 1-7/8(47.63mm), 2(50.8mm) and 2-1/8(53.98mm)
- WIDELY APPLICATION: The Forstner bit set is fit for pistol drill, bench drill, vertical drilling, machine hand-held electric drill, stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine.
- QUALITY COMMITMENT: If you are not satisfied with your purchase for any reason, please contact us. We provide 30-day money back. 100% satisfaction guarantee for risk-free shopping!
- See more on Amazon...
Brand: GMTOOLS | Manufacturer: GMTOOLS
See On Amazon #17
ASNOMY 6PCS Large Size Forstner Bit Set, 1-3/8Inch to 2-3/4Inch Carbide Tipped Forstner Drill Bit for Hard Wood, Wood Drilling bit Set Woodworking Hinge Cutter Tool Kits for Wood Plastic Plywood
Asin: B0B4RCVRNX | Ean: 0725576864619 | UPC: 725576864619
【Large Size】Drilling Diameter：1-3/8Inch, 1-9/16Inch, 1-3/4Inch, 2Inch, 2-3/8Inch, 2-3/4Inch, Hex Shank Dia.: 3/8 Inch(9.5Mm) , Drilling Depth: 2-3/8Inch (60Mm), Total Length: 3-9/16 Inch(90Mm)..
【Widely Applications】Widely Used For Drilling Holes On On Wood And Plastic Products, Furniture, Door Hinge, Desk. Used On Cutting Wood, Plywood, Solid Wood Boards, Mdf, Plastics, Sandwich Panels, Etc..
【 Sharp & Clean Holes】This Tct (Tungsten Carbide Tipped Cutters)Forstner Bit Set Perfect For Hard Wood, Easily Drill Precise Flat Bottom Holes With No Chipping In Hard Wood Or Soft Wood.(Drilling Depth Up To 2-3/8Inch).
【Top Quality】Our Forstner Drill Bit Made From High Quality Tungsten Carbide Tipped Cutters, And Solid Hardened Steel Body, Ensuring Its High Hardness, Rust Proof, Sturdy And Durable；.
Features
- Warm Tips For large-size Forstner drill bits ( 60mm), it is best to use machines with good fixation performance for drilling operations, such as drill presses, bench drills, vertical drill presses and vertical electric drills, etc. If you must use a hand electric drill to operate , be sure to use a high-power electric hand drill, and it is best to use it with a vise with good fixation effect. Otherwise, good hole opening effect will not be achieved.
- Top Quality Our Forstner Drill bit made from high quality Tungsten Carbide Tipped Cutters, and solid hardened steel body, ensuring its high hardness, rust proof, sturdy and durable
- Large Size Drilling diameter 1-3/8Inch, 1-9/16Inch, 1-3/4Inch, 2Inch, 2-3/8Inch, 2-3/4Inch, Hex Shank Dia.: 3/8 Inch(9.5mm) , Drilling depth: 2-3/8Inch (60mm), Total length: 3-9/16 Inch(90mm).
- Sharp & Clean Holes This TCT (Tungsten Carbide Tipped Cutters)Forstner bit set perfect for hard wood, easily drill precise flat bottom holes with no chipping in Hard Wood or soft wood.(Drilling depth up to 2-3/8Inch)
- Widely Applications Widely used for drilling holes on on wood and plastic products, furniture, door hinge, desk. Used on cutting wood, plywood, solid wood boards, MDF, plastics, sandwich panels, etc.
- See more on Amazon...
Brand: ASNOMY | Manufacturer: ASNOMY
See On Amazon #18
Vouyar 3 Inch Forstner Drill Bit, Triple-Flute Carbide Tipped Forstner Bit for Hard Wood, Soft Wood, Veneered Plywood, Plastic, Drilling Hole Saw Woodworking Hinge Cutter Tool
Asin: B0CKXHNCPH
3-Blade (Flute) Design: Fast, Smooth Cutting Experience And Chip Removal, With Improved Durability Compared To Counterparts With 2 Blades(Flutes)..
Reminder: Can Be Used With Hand Held Drills And Bench Presses. Please Wear Eye Protection At All Time. Please Do Not Use The Bit With Impact Driver..
Wide Compatibility: Vouyar's Forstner Drill Bit Will Drill Through A Multitude Of Materials Including Hardwood/Softwood/Composites/Veneered Plywood/Plastic. Use To Drill Pocket Holes, Angled Holes, Overlapping Holes And Flat Bottom Holes..
Point-Precision: 1 Centring Tip With 3 Peripheral Cutting Edges Locate The Centre Of The Hole With Ease, Prevents The Bit From Wandering Around. Ensure Consistent And Accurate Results..
Features
- Heavy-duty: Thick micro-grain carbide tips ensure cleaner cuts and long lasting sharpness. Solid hardened steel build for optimal structural strength.
- Point-precision: 1 centring tip with 3 peripheral cutting edges locate the centre of the hole with ease, prevents the bit from wandering around. Ensure consistent and accurate results.
- 3-Blade (Flute) Design: Fast, smooth cutting experience and chip removal, with improved durability compared to counterparts with 2 blades(flutes).
- Wide compatibility: Vouyar's forstner drill bit will drill through a multitude of materials including hardwood/softwood/composites/veneered plywood/plastic. Use to drill pocket holes, angled holes, overlapping holes and flat bottom holes.
- Reminder: Can be used with hand held drills and bench presses. Please wear eye protection at all time. Please DO NOT use the bit with impact driver.
- See more on Amazon...
Brand: Vouyar | Manufacturer: Vouyar
Dimensions: 5.12 x 3.54 x 3.54 Inches
See On Amazon #19
COMOWARE Forstner Bit Set - 16 Pcs Forstner Drill Bits Set for Wood, Auger Opener Round Shank Drilling Cutting Tool for Woodworking
Asin: B08P5CT3T9
All Size You Need: 16 Pcs Includes 1/4" (6.3Mm), 3/8" (9.5Mm), 1/2" (12.7Mm), 5/8" (15.8Mm), 3/4" (19.0Mm), 7/8" (22.2Mm), 1" (25.4Mm), 1-1/8" (28.5Mm), 1-1/4" (31.7Mm), 1-3/8" (34.9Mm) ，1-1/2（38.1Mm), 1-5/8(41.28Mm), 1-3/4(44.45Mm), 1-7/8(47.63Mm), 2(50.8Mm) And 2-1/8(53.98Mm) Forstner Bits.
Efficient Cutting: Significantly Reduces Cutting Time Compared With Traditional Drill Bits.Also These Drill Bits Make Drilling Hole Smooth And Smooth.
Sharp Design: Our Drill Has The Features Of Sharp Edge, Accurate Positioning, High Hardness, Impact Resistance, High Precision, Smooth Cutting And High Toughness. Fostner Bit Can Produce Holes That Are Smooth And Flat, And Create “Chisel-Like" Curls For Fast, Clean Chip Removal..
Widely Application: It Is Suitable For Industrial Hinge Installation, Wood Processing And Maintenance, Model Production, Installation Of Spherical Door, Drawers And Other Occasions. It Can Easily Cut Wood, Plastic, Resin, Pvc And Other Materials.
Features
- DURABLE MATERIAL: Forstner bit is made of carbon steel, with the advantage of sharp edge, accurate positioning, high precision and stable cutting.
- WIDELY APPLICATION: It is suitable for industrial hinge installation, wood processing and maintenance, model production, installation of spherical door, drawers and other occasions. It can easily cut wood, plastic, resin, PVC and other materials
- ALL SIZE YOU NEED: 16 PCS includes 1/4 (6.3mm), 3/8 (9.5mm), 1/2 (12.7mm), 5/8 (15.8mm), 3/4 (19.0mm), 7/8 (22.2mm), 1 (25.4mm), 1-1/8 (28.5mm), 1-1/4 (31.7mm), 1-3/8 (34.9mm) 1-1/2 38.1mm), 1-5/8(41.28mm), 1-3/4(44.45mm), 1-7/8(47.63mm), 2(50.8mm) and 2-1/8(53.98mm) forstner bits
- SHARP DESIGN: Our drill has the features of sharp edge, accurate positioning, high hardness, impact resistance, high precision, smooth cutting and high toughness. Fostner bit can produce holes that are smooth and flat, and create chisel-like curls for fast, clean chip removal.
- EFFICIENT CUTTING: Significantly reduces cutting time compared with traditional drill bits.Also these drill bits make drilling hole smooth and smooth
- See more on Amazon...
Brand: COMOWARE | Manufacturer: COMOWARE
Weight: 1.00 Pounds
See On Amazon #20
Freud PB-012: Precision Shear Serrated Edge Forstner Drill Bit
Asin: B0000AV738 | Model: PB-012 | PartNumber: PB-012 | Ean: 0008925028925 | UPC: 008925028925
Quality Forged Construction For Extended Life.
Steep Angled Cutting Edges – Produce Holes That Are Smooth And Flat, And Create “Chisel-Like" Curls For Fast, Clean Chip Removal..
Freud's Limited Lifetime Guarantee.
Ultra Sharp Spur To Ensure An Accurate Starting Hole.
Razor Sharp Serrated Edge For Fast And Flawless Cutting.
Features
- Specs: Diameter 1-5/8", Length 3-1/2", Rotation RH, Shank 2.25"
- Razor sharp serrated edge for fast and flawless cutting
- Quality Forged Construction for extended life
- Ultra Sharp Spur to ensure an accurate starting hole
- Steep Angled Cutting Edges produce holes that are smooth and flat, and create chisel-like curls for fast, clean chip removal.
- Freud's Limited Lifetime Guarantee
- See more on Amazon...
Brand: Freud | Manufacturer: Freud
Dimensions: 2.15 x 6.55 x 3.25 Inches | Weight: 0.32 Pounds
Warranty: Freud Limited Tooling Warranty. Contact Freud customer service for more details. 800-334-4715
See On Amazon
Looking For Something Else?
Search