3/4 inch Standard Condensate Trap with 16" Brush, Transparent U Trap,Effectively drains condensate in a variety of HVAC systems
Asin: B0BHSXMZZY | Model: S-0001 | PartNumber: S-0001
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Flexible Cleaning Brush: Equipped With A 16-Inch Flexible Brush, You Can Easily Push The Brush Into The Trap For Cleaning Durable And Durable: The Condensate Collector Is Made Of High-Quality Pvc;.
Note: Remember To Prime And Pvc Bond The Clear Parts To Avoid Leaks.
Easy Installation: It Is Very Easy To Install And Works Well With 3/4 Inch Pvc Drains In Central Air Conditioning, Furnace Condensate And Hvac Systems;.
Clear U-Tube Design: Clear Pvc U-Shaped Tube And Open Blue Lid Allow You To Easily Check If There Is Any Sediment Clogging The Trap And Easily Open For Cleaning.
Features
- Condensate water treatment: The standard condensate water collector adopts gradient design, which can effectively discharge condensate water in various HVAC systems; the U-shaped tube filled with water is enough to stop the suction force from pulling water back to the air conditioner, preventing the condensate water from flowing back, allowing the water to Ejected smoothly.
- Clear U-Tube Design: Clear PVC U-shaped tube and open blue lid allow you to easily check if there is any sediment clogging the trap and easily open for cleaning
- Flexible Cleaning Brush: Equipped with a 16-inch flexible brush, you can easily push the brush into the trap for cleaning Durable and durable: the condensate collector is made of high-quality PVC;
- EASY INSTALLATION: It is very easy to install and works well with 3/4 inch PVC drains in central air conditioning, furnace condensate and HVAC systems;
- NOTE: Remember to prime and PVC bond the clear parts to avoid leaks
- See more on Amazon...
Brand: salipt | Manufacturer: salipt
Dimensions: 7.80 x 7.00 x 1.70 inches | Weight: 0.43 Pounds
See On Amazon Similar To 3 4 inch Standard Condensate
#1
POWERTEC 70145 4-Inch to 3-Inch Reducer
Asin: B00M3IT378 | Model: 70145 | PartNumber: 70145 | Ean: 0736815005960 | UPC: 736815005960
Easy To Use: Offers A 4” Od Profile With Tapered Port On One Side, Fits Inside Most 3" Dust Collection Hose.
3-Inch Nominal End Measures 2-63/64-Inch O.D. And 2-23/32-Inch I.D..
Transition 3-Inch Duct To 4-Inch Standard Hose.
Tough, Durable Abs Plastic Material.
Dimensions: 4-Inch O.D Nominal End | 3-Inch O.D Nominal End.
Connect 3-Inch Opening Duct To 4-Inch Flexible Hose.
Premium Quality: Made With Heavy Duty Abs Plastic Material For Long-Term Durability And Made To Withstand The Abrasive Nature Of Woodworking And Workshop Dust Collection.
4-Inch Nominal End Measures 3-15/16-Inch O.D. And 3-45/56-Inch I.D..
Function: This Dust Collector Attachment Possesses A 4-Inch Od End That Connects To Standard 4-Inch Id Dust Collection Hose And Allows You To Step Down To A 3 Inch Dust Collection Hose Or Line Branch. Note: To Connect To Other 4” Od Ports Or Adapters, A 4”Flex Cuff, Powertec 70149, Will Be Needed..
Features
- INCLUDES: 4 inch to 3 inch dust collection reducer (1pc)
- FUNCTION: This dust collector attachment possesses a 4-inch OD end that connects to standard 4-inch ID dust collection hose and allows you to step down to a 3 inch dust collection hose or line branch. Note: to connect to other 4 OD ports or adapters, a 4 flex cuff, POWERTEC 70149, will be needed.
- EASY TO USE: Offers a 4 OD profile with tapered port on one side, fits inside most 3 dust collection hose
- PREMIUM QUALITY: Made with heavy duty ABS plastic material for long-term durability and made to withstand the abrasive nature of woodworking and workshop dust collection
- DIMENSIONS: 4-Inch o.d nominal end | 3-Inch o.d nominal end
- Connect 3-Inch opening duct to 4-Inch flexible hose
- Transition 3-Inch duct to 4-Inch standard hose
- Tough, durable ABS plastic material
- 4-Inch nominal end measures 3-15/16-Inch O.D. and 3-45/56-Inch I.D.
- 3-Inch nominal end measures 2-63/64-Inch O.D. and 2-23/32-Inch I.D.
- See more on Amazon...
Brand: POWERTEC | Manufacturer: Southern Technology LLC
Dimensions: 3.50 x 4.00 x 4.00 inches | Weight: 0.20 pounds
See On Amazon #2
DuctlessAire White Paintable Mini Split Line Set Cover Kit - Weather Resistant, Easy Installation, Intended for Ductless Mini Split or Central Systems, 3" x 7.5 ft.
Asin: B00LCIPP3G | Model: DA3-7KIT | PartNumber: DA3-7KIT | Ean: 0627144100481, 0758149825731, 7107284779677, 0758149825748, 0758149825724 | UPC: 758149825748, 627144100481, 758149825731, 758149825724
Professional-Grade: Crafted From Durable, Weather-Resistant Rigid Materials, This Mini Line Set Kit Offers Long-Lasting Performance And Maintains A Clean And Protected Appearance For Years To Come..
Our Commitment To Customer Satisfaction: At Ductlessaire, We Understand Ever-Changing Consumer Needs. We Integrate Cutting-Edge Technology And Proven Quality Into All Our Products. We Go Above Expectations, Delivering Uniquely Memorable Customer Experiences That Highlight Our Unwavering Commitment To Excellence..
Flexible & Adjustable: The Cover Material Can Be Easily Cut To Accommodate Your Specific Preferences, Ensuring A Proper Fit And Seamless Integration With Your Mini Split System. Attractively Enhance The Appearance And Functionality Of Your Setup..
Comprehensive Coverage: Our Line Set Cover Kit Covers Crucial Components Including Refrigerant Tubing, Electrical Wiring, And Plumbing. Ensure A Professional And Polished Look..
Features
- CUSTOMIZABLE AESTHETICS: Personalize your installation with a white color finish that can be painted to match your unique wall colors. This line set cover kit effortlessly blends with your exterior or interior design.
- COMPREHENSIVE COVERAGE: Our line set cover kit covers crucial components including refrigerant tubing, electrical wiring, and plumbing. Ensure a professional and polished look.
- PROFESSIONAL-GRADE: Crafted from durable, weather-resistant rigid materials, this mini line set kit offers long-lasting performance and maintains a clean and protected appearance for years to come.
- FLEXIBLE & ADJUSTABLE: The cover material can be easily cut to accommodate your specific preferences, ensuring a proper fit and seamless integration with your mini split system. Attractively enhance the appearance and functionality of your setup.
- OUR COMMITMENT TO CUSTOMER SATISFACTION: At DuctlessAire, we understand ever-changing consumer needs. We integrate cutting-edge technology and proven quality into all our products. We go above expectations, delivering uniquely memorable customer experiences that highlight our unwavering commitment to excellence.
- See more on Amazon...
Brand: Hide-A-Line | Manufacturer: DuctlessAire
Dimensions: 4.00 x 40.00 x 7.00 Inches | Weight: 4.00 pounds
See On Amazon #3
Eastrans 5ft x 3/4" ID Clear Vinyl Tubing, Flexible Hybrid PVC Tubing Hose, Lightweight Plastic Tube UV Chemical Resistant Vinyl Hose, BPA Free and Non Toxic
Asin: B07ZC1YG9X | Model: 15 | PartNumber: 15 | Ean: 0737504987451 | UPC: 737504987451
Durable Use - Pvc Material Is Resistant To Abrasions And Corrosion. This Plastic Tubes Are Easy To Use, Shape, And Bend And Can Be Easily Cut By Any Cutting Tool. Generally Resistant To Most Alkali, Alcohol, And Mild Acids And Chemicals..
Excellent Customer Service - Our Aim Is To Provide Consumers With More Practical And Durable Hoses. Any Questions About The Product, Please Contact Us. We Will Reply You Within 24 Hours And Solve Your Problems Until You’Re Satisfied..
Low Pressure Applications - Hybrid Pvc Tubing Is Applicable To Industrial And Agricultural, Engineering, Fish Farming, And Other Fields, Or Laboratory Applications For Transferring Liquid And Gas, Such As Air Hose For Fish Tanks And Aquarium, Ponds, Indoor Water Garden And Other Home Uses..
Tubing Details - Pvc Vinyl Tubing, Id: 3/4", Od: 1", 5 Feet, Wall Thickness: 3.15Mm; Hardness: 73A (Firm); Temperature Range : 23°F To 149°F (-5°C To 65°C); Working Pressure: 30Psi..
Features
- PVC Material - Tubing is made of high quality PVC material, lightweight and flexible, can withstand rough handling and multiple usage. Smooth interior and exterior that prevents sediment accumulation and allows easy flow and flushing.
- Tubing Details - PVC vinyl tubing, ID: 3/4, OD: 1, 5 feet, Wall thickness: 3.15mm; Hardness: 73A (firm); Temperature Range : 23 F to 149 F (-5 C to 65 C); Working Pressure: 30PSI.
- Durable Use - PVC material is resistant to abrasions and corrosion. This plastic tubes are easy to use, shape, and bend and can be easily cut by any cutting tool. Generally resistant to most alkali, alcohol, and mild acids and chemicals.
- Low Pressure Applications - Hybrid PVC tubing is applicable to industrial and agricultural, engineering, fish farming, and other fields, or laboratory applications for transferring liquid and gas, such as air hose for fish tanks and aquarium, ponds, indoor water garden and other home uses.
- Excellent Customer Service - Our aim is to provide consumers with more practical and durable hoses. Any questions about the product, please CONTACT US. We will reply you within 24 Hours and solve your problems until you re satisfied.
- See more on Amazon...
Brand: Eastrans | Manufacturer: Hosetool
Dimensions: 1.02 x 7.87 x 11.81 inches | Weight: 0.45 Kilograms
See On Amazon #4
3/4" ID x 10 Ft High Pressure Braided Clear PVC Vinyl Tubing Flexible Vinyl Tube, Heavy Duty Reinforced Vinyl Hose Tubing, BPA Free and Non Toxic
Asin: B07TQSN2NM | Model: 9 | PartNumber: 9 | Ean: 0737504987024 | UPC: 737504987024
Durable Use - The Clear Braided Vinyl Tubing Walls Are Thick And Flexible Enough To Prevent Kinks, Ideal For Working In Confined Areas. High Quality Material Makes It Uv-Resistant, Chemicals Resistant..
Excellent Customer Service - Our Aim Is To Provide Consumers With More Practical And Durable Hoses. Any Questions About The Product, Please Contact Us. We Will Reply You Within 24 Hours And Solve Your Problems Until You’Re Satisfied..
Widely Application - High Pressure Pvc Tubing Applicable To Industrial And Agricultural, Engineering, Fish Farming, And Other Fields. Ideal For Oil, Fuel, Water, And Air Lines Dispensing..
Hose Detail - Id: 3/4", Od: 1", 10 Ft, Wall Thickness: 3.55Mm; Hardness: 73A (Firm); Temperature Range : 23°F To 149°F (-5°C To 65°C); Working Pressure: 200Psi..
Features
- Heavy Duty - Clear braided hose made of high pressure and high duty PVC with smooth interior and exterior that allows easy flow and flushing, light weight, BPA Free, non-toxic.
- Hose Detail - ID: 3/4, OD: 1, 10 ft, Wall thickness: 3.55mm; Hardness: 73A (firm); Temperature Range : 23 F to 149 F (-5 C to 65 C); Working Pressure: 200PSI.
- Durable Use - The clear braided vinyl tubing walls are thick and flexible enough to prevent kinks, ideal for working in confined areas. High quality material makes it uv-resistant, chemicals resistant.
- Widely Application - High pressure PVC tubing applicable to industrial and agricultural, engineering, fish farming, and other fields. Ideal for oil, fuel, water, and air lines dispensing.
- Excellent Customer Service - Our aim is to provide consumers with more practical and durable hoses. Any questions about the product, please CONTACT US. We will reply you within 24 Hours and solve your problems until you re satisfied.
- See more on Amazon...
Brand: Eastrans | Manufacturer: Hosetool
Dimensions: 0.04 x 120.00 x 1.00 inches
See On Amazon #5
Deflecto Duct Increaser and Reducer, Plastic Inline Adapter, White, 4 to 3 (IRB43)
Asin: B005XU3QCQ | Model: IRB43 | PartNumber: IRB43
Ean: 0807320263722, 0080000267948, 0806293939856, 0012301812480, 0079916700113, 0151903459843, 0809187154380, 0801200951860, 0071020195793, 0100177506555, 0881110023130, 7554785406593, 0807031789276, 0809386509097, 0115970775725, 0168141204142
UPC: 115970775725, 809187154380, 151903459843, 809386509097, 881110023130, 168141204142, 807320263722, 080000267948, 807031789276, 100177506555, 079916700113, 071020195793, 801200951860, 012301812480, 806293939856
Durable Polypropylene Construction Has A Melting Point Of Approximately 325 Degrees.
Ideal For Bathroom Fan Installations.
Connects A 4 Inch Dryer Exhaust Hood To A 3 Inch Duct.
Simply Slip The Ducts Over The Increaser/Reducer, Tightening In Place With Clamps (Not Included).
Features
- Designed to transition between 4" and 3" diameter ducts
- Simply slip the ducts over the increaser/reducer, tightening in place with clamps (not included)
- Durable polypropylene construction has a melting point of approximately 325 degrees
- Connects a 4 inch dryer exhaust hood to a 3 inch duct
- Ideal for bathroom fan installations
- See more on Amazon...
Brand: Deflecto | Manufacturer: Deflecto
Dimensions: 4.00 x 4.00 x 3.40 Inches | Weight: 0.10 Pounds
Warranty: Deflecto Duct Plastic Increaser and Reducer, 4" to a 3", (IRB43)
See On Amazon #6
Advanced Drainage 0314AA 4 x 3 reducing Coupling, 4 x 3 Inch, Black
Asin: B000DZQQBE | Model: 0314AA | PartNumber: 0314AA | Ean: 0096942300155 | UPC: 096942300155
Model Number: 0314Aa.
Country Of Origin: China.
Brand Name: Advanced Drainage.
Features
- United States
- Brand name: Advanced Drainage
- Model number: 0314AA
- Country of Origin: China
- See more on Amazon...
Brand: Advanced Drainage | Manufacturer: Advanced Drainage Systems Inc.
Dimensions: 4.00 x 5.50 x 5.50 inches | Weight: 0.10 pounds
Warranty: Warranty
See On Amazon #7
HVAC OV 4" to 3" Inch Round Duct Reducer - Galvanized Steel Pipe Increaser - Coupling for Round Duct Ventilation Systems - Heating & Cooling, HVAC
Asin: B0BZWH3DT4 | Ean: 4751037982482
Raised Lip On Both Openings Allows Connecting Ducts To Get A Better Grip. Once Installed, Reducer Should Be Secured With Clamps Or Any Preferred Fastener..
Hvac Ov Offers Variety Of Sizes And Configurations For Hose / Pipe / Duct Connecting..
Wide Application Range: Can Be Used With Hvac Systems, Bathroom Extractor Fans, Inline Ventilators, Cooker Hoods, Tumble Dryers, Hydroponics, Kitchens Or, Anywhere Else In The Apartment, Home Or Office Space..
Material: Galvanized Steel. Smallest Opening Dimensions: Ø3.15" Inches. Biggest Opening Dimensions: Ø3.93" Inches. Both Openings Are Male Fit..
Features
- This is a very practical, robust, solid duct reducer or increaser which can be used when connecting two different size solid or flexible ducts.
- Material: Galvanized Steel. Smallest opening dimensions: 3.15 Inches. Biggest opening dimensions: 3.93 Inches. Both openings are male fit.
- Raised lip on both openings allows connecting ducts to get a better grip. Once installed, reducer should be secured with clamps or any preferred fastener.
- Wide application range: can be used with HVAC systems, bathroom extractor fans, inline ventilators, cooker hoods, tumble dryers, hydroponics, kitchens or, anywhere else in the apartment, home or office space.
- HVAC OV offers variety of sizes and configurations for hose / pipe / duct connecting.
- See more on Amazon...
Brand: HVAC OV | Manufacturer: HVAC OV
Dimensions: 3.81 x 4.05 x 4.05 Inches | Weight: 0.00 pounds
See On Amazon #8
6 Pieces Bore Brush Set Variety of Size & Shape Stainless Steel Twisted Wire Brush for Cleaning Rust, Auto, Corrosion, Tubes Holes, 1/4in Hex Drill Shank for Power Drill Impact Driver, 4" Long
Asin: B09P5237JH | Model: GS01-6set | PartNumber: GS01-6set
[Standard Fit]- 1/4" Hex Shank Allows These Brushes Work Well On A Power Cordless Drill Or Die Grinder And Driver, Durable Stainless Steel Twisted Wire Bristles Will Not Fall Off And Quickly Deform..
[Please Use The Brush Correctly]-Please Do Not Exceed 600 Rpm, Do Not Turn Counterclockwise, Just For Push And Pull Motion Only; Use These Brushes Correctly To Extend Their Service Life.
[6 Different Sizes]-8 Mm, 10 Mm, 12 Mm, 15 Mm, 17 Mm And 19 Mm Bristles Diameter, 4" Length; 1/4 Inch Hex Shank To Be Mounted On Any Power Drill Or Die Grinder(Not Included).
[Multiple Applications]-Wire Brushes Is Designed For Easy Access Into Narrow Holes And Confined Areas, Suitable For Cleaning Rust, Corrosion, Debris And Dust, Can Be Used For Automotive, Tubes, Ports, Or Other Narrow Clean Up Requirements Such As Small Engine Parts Or A Motorcycle Engine Block, Scrub The Inside Of Condensate Tubes, Clean The Caliper Bolt Holes For A Brake Job And Threaded Holes..
Features
- [Variety of Size & Shape] -Package contains 6 pieces stainless steel bore brushes, with lots of choices in material, shape, and size that allowing exact fit, easy to switch brush sizes, and can meet your different needs.
- [MULTIPLE APPLICATIONS]-wire brushes is designed for easy access into narrow holes and confined areas, suitable for cleaning rust, corrosion, debris and dust, can be used for automotive, tubes, ports, or other narrow clean up requirements such as small engine parts or a motorcycle engine block, scrub the inside of condensate tubes, clean the caliper bolt holes for a brake job and threaded holes.
- [STANDARD FIT]- 1/4 hex shank allows these brushes work well on a power cordless drill or die grinder and driver, durable stainless steel twisted wire bristles will not fall off and quickly deform.
- [6 DIFFERENT SIZES]-8 mm, 10 mm, 12 mm, 15 mm, 17 mm and 19 mm bristles diameter, 4 length; 1/4 inch hex shank to be mounted on any power drill or die grinder(not included)
- [PLEASE USE THE BRUSH CORRECTLY]-Please DO NOT exceed 600 rpm, DO NOT turn counterclockwise, just for push and pull motion only; Use these brushes correctly to extend their service life
- See more on Amazon...
Brand: MAXMAN | Manufacturer: Lanxi MAXMAN Tools
See On Amazon #9
Vent Systems 4" inch to 3" inch Duct Reducer Adapter Connector Fitting Pipe Increaser Reducer Cone for HVAC, Ventilation Systems, Exhausts and Grow Tents. Metal 100 to 80 mm
Asin: B0957VML6B | Ean: 4751037232310
Easy Install - Just Push-Fit Straight Or Flexible Duct And Fix In Place With Steel Clamp And Tighten The Screw..
Durable Material: Made Of Quality Metal And Is Rust Free. Fits Perfectly With Other Vent Systems Hvac Products..
Maintains Airflow Efficiency By Creating A Connection Between Two Different Sized Duct Openings..
For Multiple Purposes - Ventilation, Cooling, Heating, Fresh Air Supply, Bathroom Or Kitchen Exhaust, Grow Tents Or Dryer Vent Reducer / Adapter..
Features
- 3.9" inch to 3.1" inch male fit ventilation reducer/increaser.
- For multiple purposes - ventilation, cooling, heating, fresh air supply, bathroom or kitchen exhaust, grow tents or dryer vent reducer / adapter.
- Easy Install - Just push-fit straight or flexible duct and fix in place with steel clamp and tighten the screw.
- Maintains airflow efficiency by creating a connection between two different sized duct openings.
- Durable Material: Made of Quality Metal and is rust free. Fits perfectly with other Vent Systems HVAC products.
- See more on Amazon...
Brand: Vent Systems | Manufacturer: Vent Systems
Dimensions: 3.82 x 4.06 x 4.06 inches | Weight: 0.24 pounds
See On Amazon #10
Anderson Metals-07002-1612 Brass Hose Fitting, Connector, 1" Barb x 3/4" Female Pipe
Asin: B006PKL59E | Model: 07002-1612 | PartNumber: 07002-1612 | Ean: 0719852122432 | UPC: 719852122432
Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability.
For Use With Plastic Or Rubber Hose.
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable Water Use In The U.S.A. And Its Territories..
Barbed Fitting Creates A Tight Seal On Flexible And Semi-Rigid Hose When Used With A Hose Clamp Or Crimp Sleeve Or Ferrule (Sold Separately).
Fitting Connects To Hose On One End And Has An Npt Female Connector On The Other.
Features
- Adapter for connecting pipes or fittings of different types
- Fitting connects to hose on one end and has an NPT female connector on the other
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (sold separately)
- For use with plastic or rubber hose
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: Anderson Metals | Manufacturer: Anderson Metals
See On Amazon #11
PneumaticPlus PPF2-N02B Miniature Compressed Air Particulate Filter 1/4" NPT - 5 Micron, Poly Bowl, Manual Drain, Bracket
Asin: B016XIX73O | Model: PPF2-N02B | PartNumber: PPF2-N02B | Ean: 0841693110122 | UPC: 841693110122
Manual Drain & Poly Bowl With Guard, Includes C-Bracket.
Original Equipment Manufacturer - Made In Korea.
Use Metal Bowl In Pressure Exceeding 150Psi Or When Solvents Harmful To Polycarbonate Is Present.
Particualte Filter: 5 Micron Element, High Strength, Recleanable Element, Port Size:1/4" Npt.
Features
- Max. Supply Pressure: 250 PSI, Max Operating Pressure: 140 PSI, 50 SCFM @ 90PSI
- Particualte Filter: 5 Micron Element, High Strength, recleanable element, Port Size:1/4 NPT
- Manual Drain & Poly Bowl with Guard, Includes C-Bracket
- Use Metal bowl in pressure exceeding 150PSI or when solvents harmful to polycarbonate is present
- ORIGINAL EQUIPMENT MANUFACTURER - Made In Korea
- See more on Amazon...
Brand: PneumaticPlus | Manufacturer: PneumaticPlus
See On Amazon #12
Woodstock W1011 4-Inch to 3-Inch Reducer
Asin: B0000223YI | Model: W1011 | PartNumber: W1011 | Ean: 0787721259114, 0785533479744, 0754001000117 | UPC: 785533479744, 787721259114, 754001000117
Item Package Dimension: 4.0" L X 4.0" W X 3.5" H.
Item Package Weight: 0.219996 Lb.
Model Number: W1011.
Features
- Country Of Origin: China
- Model Number: W1011
- Item Package Dimension: 4.0 L x 4.0 W x 3.5 H
- Item Package Weight: 0.219996 lb
- See more on Amazon...
Brand: Woodstock | Manufacturer: WOODSTOCK
Weight: 1.00 Pounds
See On Amazon #13
Milton 1019-8 3/8" NPT Metal FRL Filter
Asin: B001O2XY42 | Model: 1019-8 | PartNumber: 1019-8 | Ean: 0030937101983 | UPC: 030937101983
Includes Sight Glass To Monitor Water Levels.
Temperature Range Of 40 Degrees Fahrenheit To 160 Degrees Fahrenheit.
40 Micron Bronze Sintered Filter.
Manual Overnight Drain.
Features
- 1/4" national pipe thread
- Manual overnight drain
- Includes sight glass to monitor water levels
- 40 micron bronze sintered filter
- Temperature range of 40 degrees Fahrenheit to 160 degrees Fahrenheit
- See more on Amazon...
First Available: 04/26/2016
Brand: Milton | Manufacturer: Milton Industries
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.10 pounds
Warranty: 1 Year
See On Amazon #14
Arctic Air AWF25 30" One Section, Single Solid Door Reach-In Freezer, White, 25 Cubic Feet, 115v
Asin: B00QWWCJLS | Model: AWF25 | PartNumber: AWF25 | Ean: 0400011767211 | UPC: 400011767211
Efficient Operation: The Self-Contained Capillary Tube System Circulates Cfc-Free, R-404A Refrigerant Through The Unit, And The Condensate Heating Element Is Built Directly Into The Condensate Pan To More Efficiently Evaporate Excess Water..
Ergonomic Design: It Includes A Bottom-Mounted, 3/4 Hp Compressor That Allows For Ergonomic Use, As It Elevates The Storage Compartment To Reduce The Need To Bend And Lift Heavy Items. Plus, The Bottom-Mounted Compressor Allows The User To Use The Unit's Top As Valuable Extra Storage..
Recessed Handle Designed: The Door On This Articair Freezer Is Field Reversible For Right Or Left-Handed Operation, And The Foamed-In, Recessed Handle Provides An Easy Grip Without Protruding From The Unit..
25 Cubic Feet Capacity: This Unit Comes Standard With Three Adjustable, Heavy-Duty Epoxy Coated Wire Shelves So That You Reconfigure The Storage Space To Best Hold All Of Your Frozen Items! Inside, This Unit Provides 25 Cu. Ft. Of Flexible Storage Space..
Features
- PRECISE TEMPERATURE CONTROL: This commercial freezer is equipped with an electronic thermostat and external digital LED display so that you can easily read the current temperature and adjust it if necessary. The Artic Air AWF25 maintains temperatures between -7 - 10 degrees Fahrenheit.
- 25 CUBIC FEET CAPACITY: This unit comes standard with three adjustable, heavy-duty epoxy coated wire shelves so that you reconfigure the storage space to best hold all of your frozen items! Inside, this unit provides 25 cu. ft. of flexible storage space.
- EFFICIENT OPERATION: The self-contained capillary tube system circulates CFC-free, R-404A refrigerant through the unit, and the condensate heating element is built directly into the condensate pan to more efficiently evaporate excess water.
- RECESSED HANDLE DESIGNED: The door on this ArticAir freezer is field reversible for right or left-handed operation, and the foamed-in, recessed handle provides an easy grip without protruding from the unit.
- ERGONOMIC DESIGN: It includes a bottom-mounted, 3/4 hp compressor that allows for ergonomic use, as it elevates the storage compartment to reduce the need to bend and lift heavy items. Plus, the bottom-mounted compressor allows the user to use the unit's top as valuable extra storage.
- See more on Amazon...
First Available: 08/14/2018
Brand: Arctic Air | Manufacturer: Arctic Air
Dimensions: 78.00 x 30.75 x 29.00 inches | Weight: 250.00 Pounds
Warranty: Arctic Air warrants to the original purchaser, all of its new equipment to be free from defects in material or workmanship, under normal use and maintenance service, for a period of one (1) year from the date of original purchase or 15 months after shipment date from the manufacturer, whichever occurs first. Warranty coverage is limited to the repair and/or replacement, including labor charges, of defective parts and/or assemblies. The labor warranty shall include straight time labor charges and travel charges within 100 miles roundtrip.
See On Amazon #15
Milton 1026-8 3/4" NPT High Pressure FRL Regulator
Asin: B001O2XXZ2 | Model: 1026-8 | PartNumber: 1026-8 | Ean: 0030937307125 | UPC: 030937307125
Maximum Of 220 Standard Cubic Feet Per Minute At 100 Pounds Per Square Inch.
Install Upstream From Regulators.
3/4" National Pipe Thread.
Maximum Pressure Of 250 Pounds Per Square Inch.
Buna-N Diaphragm.
Made In Usa.
Operating Temperature Range Of 40 Degrees Fahrenheit To 120 Degrees Fahrenheit.
Maximum Of 230 Standard Cubic Feet Per Minute At 100 Pounds Per Square Inch.
Maximum Inlet Pressure Of 250 Pounds Per Square Inch.
Features
- 3/4" national pipe thread
- Maximum inlet pressure of 250 pounds per square inch
- Maximum of 220 standard cubic feet per minute at 100 pounds per square inch
- Operating temperature range of 40 degrees Fahrenheit to 120 degrees Fahrenheit
- Buna-N diaphragm
- Made in USA
- 3/4 national pipe thread
- Maximum pressure of 250 pounds per square inch
- Maximum of 230 standard cubic feet per minute at 100 pounds per square inch
- Install upstream from regulators
- See more on Amazon...
First Available: 04/26/2016
Brand: Milton | Manufacturer: Milton Industries
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.10 pounds
Warranty: 1 Year
See On Amazon #16
(1/4"+3/8") 25FT Mini Split Line Set Specialized for Air Conditioner Copper Pipes Tubing Heat Pump Systems HVAC,3/8" Thickened PE Insulation Coil,1/4" & 3/8" Twin Copper Pipes With Nuts And Wire.
Asin: B0CN8GG7KS | Model: 25ft-1p | PartNumber: 25ft-1p | Ean: 0757158905786 | UPC: 757158905786
3、Working Environment : This Near Ac Line Unit Can Work In A Wide Temperature Range Of -40℃ To 120℃. It Is Suitable For Most Small Split Air Conditioning Units Using Refrigerants Such As R410a, R22... Etc..
5、Easy-To-Use : This Air Conditioning Copper Line Set Is Suitable For Most Ductless Mini-Split Air Conditioning And Heat Pump Systems, And The Pre-Expanded End With Nut Is Easier To Use For Installation. (1/4′′&3/8′′=9000 Btu, 1/4′′&1/2′′=13000~18000 Btu).
4、Complete Accessories : It Comes Complete With 26 Ft Of Drain Hose And 26 Ft Of Distribution Wire For Mini-Split Units, 3 Rolls Of Insulating Tape (10 Feet/Roll), 2 Pieces Of Hole-Plugging Plastisol, And 1 Air Conditioner Hole Plug Cover..
2、Durable And Eco-Friendly : Thickened Embossed Pe Overlay With Embossed Pe On The Double Line Set Extension Cord Is Abrasion-Resistant, Isolates Water As Well As Other Contaminants, And Also Mitigates Noise During Operation..
Features
- 1 Good Quality : High quality copper tube making, excellent quality to enable this product to withstand high pressure and high temperature working environment, the standard copper tube size suitable for HVAC refrigerant .
- 2 Durable And Eco-Friendly : Thickened embossed PE overlay with embossed PE on the double line set extension cord is abrasion-resistant, isolates water as well as other contaminants, and also mitigates noise during operation.
- 3 Working Environment : This Near AC line unit can work in a wide temperature range of -40 to 120 . It is suitable for most small split air conditioning units using refrigerants such as R410A, R22... etc.
- 4 Complete Accessories : It comes complete with 26 ft of drain hose and 26 ft of distribution wire for mini-split units, 3 rolls of insulating tape (10 feet/roll), 2 pieces of hole-plugging plastisol, and 1 air conditioner hole plug cover.
- 5 Easy-To-Use : This air conditioning copper line set is suitable for most ductless mini-split air conditioning and heat pump systems, and the pre-expanded end with nut is easier to use for installation. (1/4 &3/8 =9000 BTU, 1/4 &1/2 =13000~18000 BTU)
- See more on Amazon...
Brand: WEALINKII | Manufacturer: WEALINKII
See On Amazon #17
Speedi-Products EX-PI 34 3-Inch to 4-Inch Round Plastic Increaser
Asin: B0085UZI7M | Model: EX-PI 34 | PartNumber: EX-PI 34 | Ean: 0060672130214, 0816040015481 | UPC: 816040015481, 060672130214
Ideal For Dryers, Exhaust Fans And Range Hoods.
Consult Your Local Building Codes For Approved Installation Practices.
Seal Joints With Approved Duct Mastic Sealants & Tapes.
Ideal For Adapting 3-Inch To 4-Inch To Oval Exhaust Air Duct Systems.
Features
- Speedi-Exhaust Products are made in the USA
- Ideal for adapting 3-Inch to 4-Inch to oval exhaust air duct systems
- Ideal for dryers, exhaust fans and range hoods
- Seal joints with approved duct mastic sealants & tapes
- Consult your local building codes for approved installation practices
- See more on Amazon...
Brand: Speedi-Products | Manufacturer: Applied Applications International
Dimensions: 2.65 x 3.90 x 3.90 inches | Weight: 0.05 pounds
Warranty: 1 Year
See On Amazon #18
Drain Pan, 8.34A, 4.5 qt., 6-3/4 in. W
Asin: B004XS1AXQ | Ean: 7436828662749
Features
- Price For: Each Pan Material: Stainless Steel Watts: 1000 Cord Length: 3 ft. Voltage: 120VAC Dissipation Rate per Day: 10 gal. Height: 4" Length: 13" Amps: 8.34A Item: Condensate Drain Pan Standards: UL approved SA32471, NSF approved Capacity: 4.5 qt. Width: 6-3/4" Country of Origin (subject to change): China
- See more on Amazon...
Brand: Supco | Manufacturer: SUPCO
See On Amazon #19
PneumaticPlus PPC4-N06G-Q1 Compressed Air Filter Regulator Lubricator Combo 3/4" NPT, 5 Micron, Metal Bowl, Manual Drain, Embedded Gauge (0-140 PSI)
Asin: B01F4MM55G | Ean: 0841693113352 | UPC: 841693113352
Manual Drain & Metal Bowl With Sight Glass, Embedded Gauge (0-140 Psi).
Original Equipment Manufacturer - Made In Korea.
Use Metal Bowl In Pressure Exceeding 150Psi Or When Solvents Harmful To Polycarbonate Is Present.
Particualte Filter: 5 Micron Element, High Strength, Recleanable Element, Port Size:3/4" Npt.
Features
- Max. Supply Pressure: 250 PSI, Operating Pressure Range: 0-140 PSI 152 SCFM @ 90PSI
- Particualte Filter: 5 Micron Element, High Strength, recleanable element, Port Size:3/4 NPT
- Manual Drain & Metal Bowl with Sight Glass, Embedded Gauge (0-140 PSI)
- Use Metal bowl in pressure exceeding 150PSI or when solvents harmful to polycarbonate is present
- ORIGINAL EQUIPMENT MANUFACTURER - Made In Korea
- See more on Amazon...
Brand: PneumaticPlus | Manufacturer: PneumaticPlus
See On Amazon #20
FLOBAL Ductless Mini Split Air Conditioning Installation Kit 16 ft. Insulated Copper Line Set 1/4 x 3/8
Asin: B0CJLK9WQR | Model: A-FP2316NS | PartNumber: A-FP2316NS | Ean: 4549947322555
Our Line Set Can Bear A Wide Working Temperature Range With A Maximum Low Temperature Of -40°F And A Maximum High Temperature Of 248°F, And Is Built To Resist Aging For 8 To 10 Years..
With An Embossed Polyethylene Outer Film, Dense Cross-Linked Polyethylene Foam, And A 3/8" Thick Inner Foam, The Line Set Is Ul94 Hf-1 Fire Retardant And Compliant With Astm B280 Standard..
Features
- The 16 ft. line set is ready for simple and easy connection with ends of the copper pipes pre-flared with nuts with1/4" liquid and 3/8" suction lines. The copper tube is made of highly purified cathode copper (99.99%) and seamless, ensuring long-lasting durability free of corrosion and leaks.
- With an embossed polyethylene outer film, dense cross-linked polyethylene foam, and a 3/8 thick inner foam, the line set is UL94 HF-1 fire retardant and compliant with ASTM B280 standard.
- Our line set can bear a wide working temperature range with a maximum low temperature of -40 F and a maximum high temperature of 248 F, and is built to resist aging for 8 to 10 years.
- See more on Amazon...
Brand: フローバル | Manufacturer: Flobal
Weight: 6.56 pounds
See On Amazon
Looking For Something Else?
Search