FV-3KHz10V Frequency to Voltage Converter 0~3Khz to 0~10V Digital to Analog Signal Inverter Module F/V Conversion Module Power Distribution and Control Equipment
Asin: B0BHTFYVVW
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Ease Of Use: Industrial Low Voltage Equipment With Input Pulse Levels Of 5V 12V 24V Can Be Input Directly Without The Need For String Resistors. The Frequency Of The Input Signal, However, Has To Be Kept Above 0.5 Seconds..
Easy To Install: Multi-Turn Potentiometer On The Voltage Digital To Analogue Converter Module Board Is Used To Calibrate The Correspondence Between Frequency And Voltage, Easy To Identify And Wire, Easy To Install..
Basic Parameters: Electronic Type Fv-500Hz 10V, Output Current Of 5Ma, Response Time About 0.3-0.5 Seconds, Recommended Supply Voltage 15-24Vdc, Can Be Used With Plc, Support Npn Type, Must Have Ground..
Versatility: F/V Converter Module Can Be Used As A Conversion Interface Between Plc And Frequency Or, In Control Situations, To Match A Motion Control Card To The Converter Interface..
Features
- KEY FEATURES: Frequency to voltage converter converts a frequency pulse signal of 0-3KHz into an analogue voltage signal of 0-10V by means of this module, using an opto-isolator to ensure that the signal input is immune to interference.
- VERSATILITY: F/V converter module can be used as a conversion interface between PLC and frequency or, in control situations, to match a motion control card to the converter interface.
- EASE OF USE: Industrial low voltage equipment with input pulse levels of 5V 12V 24V can be input directly without the need for string resistors. The frequency of the input signal, however, has to be kept above 0.5 seconds.
- BASIC PARAMETERS: Electronic type FV-500Hz 10V, output current of 5mA, response time about 0.3-0.5 seconds, recommended supply voltage 15-24VDC, can be used with PLC, support NPN type, must have ground.
- EASY TO INSTALL: Multi-turn potentiometer on the voltage digital to analogue converter module board is used to calibrate the correspondence between frequency and voltage, easy to identify and wire, easy to install.
- See more on Amazon...
Brand: Natudeco | Manufacturer: Natudeco
Dimensions: 0.67 x 1.85 x 1.77 inches | Weight: 0.04 Pounds
See On Amazon Similar To FV3KHz10V Frequency to Voltage Converter
#1
Aobao 3pcs DC-DC High Voltage Boost Converter 8V-32V to 45V-390V ZVS Step-up Booster Module Capacitor Charging Power Supply Module
Asin: B09KRLGNH7 | Model: Aobao-Boost Converter-02 | PartNumber: Aobao-Boost Converter-02 | Ean: 0701715495111 | UPC: 701715495111
Input Voltage: 8~32V Input(The Default Is 10~32V Input.).
Suitable For Capacitor Charging, Hunting, Withstand Voltage Test Power, Glow Tube Power Supply, Adjustable Voltage Output..
Output Voltage: +45~390V Continuously Adjustable (Default Output ±50V).
Module Properties: Non-Isolated Step-Up Module.
Features
- High-voltage Boost Module, ultra-wide voltage range, output voltage regulation.
- Module Properties: Non-isolated step-up module
- Input Voltage: 8~32V input(the default is 10~32V input.)
- Output Voltage: +45~390V continuously adjustable (default output 50V)
- Suitable for capacitor charging, hunting, withstand voltage test power, glow tube power supply, adjustable voltage output.
- See more on Amazon...
Brand: Aobao | Manufacturer: Aobao
See On Amazon #2
NOYITO Current to Voltage Converter Signal Conversion Module 4-20mA 0-20mA to 0-3.3V 0-5.0V 0-10.0V Amp to Volt Transmitter Board
Asin: B07K5M4VFR | Model: NOCV2010V | PartNumber: NOCV2010V | Ean: 0680613661609 | UPC: 680613661609
High Accuracy: The Current Signal Sampling Resistor Adopts High-Precision Color Ring Resistance, Offers High Accuracy, Small Temperature Drift And High Power..
Reserve Connection Protection: It Is Designed With Reverse Connection Protection, If Wires Connect Reversely, It Will Protect The Module From Burning..
Noyito Current To Voltage Converter Signal Conversion Module User Manual Https://1Drv.Ms/B/S!Alzqucoyzqhkgitnmqtqysrdlvax?E=Daxcmf.
Adjustable: Zero And Full Range Can Be Adjusted As Your Needs; The Module Is With High Stability, Good Linearity, Industrial Grade..
Usage: In The Process Of Signal Transmission, The Voltage Signal Will Be Weaker With The Increase Of Transmission Distance. Current Transmission Can Avoid The Signal Weakening..
Features
- NOYITO current to voltage converter module will be powered by 7-36V, current input range is 4-20mA/0-20mA, voltage output range is 0-3.3V/0-5V/0-10V.
- Usage: In the process of signal transmission, the voltage signal will be weaker with the increase of transmission distance. Current transmission can avoid the signal weakening.
- High accuracy: The current signal sampling resistor adopts high-precision color ring resistance, offers high accuracy, small temperature drift and high power.
- Adjustable: Zero and full range can be adjusted as your needs; the module is with high stability, good linearity, industrial grade.
- Reserve connection protection: It is designed with reverse connection protection, if wires connect reversely, it will protect the module from burning.
- NOYITO Current to Voltage Converter Signal Conversion Module User Manual https://1drv.ms/b/s!AlzQUCOyZQhKgitNMQtqysrDLvax?e=daxcmf
- See more on Amazon...
Brand: NOYITO | Manufacturer: NOYITO
Dimensions: 0.39 x 3.15 x 1.57 inches | Weight: 0.02 Pounds
Warranty: Manufacturer's One-year After-sale Warranty
See On Amazon #3
0-10KHz to 0-10V Frequency to Voltage Converter Module F/V Digital to Analog Board for Switching PLC and VFD Inverter PWM to Voltage Digital Analog Board
Asin: B078818YV5 | Ean: 0663862525373 | UPC: 663862525373
The Frequency Of The Pulse 0Hz To 10Khz Converts Into An Analog Voltage Of 0-10V..
This Module Is Easy To Wire And Convenient To Use..
Inputs With Optical Coupling Isolation, Which Can Ensure That The Capability Of Anti-Interfence..
Suitable For The Switching Of The Plc And The Frequency Converter..
Input Pulse Level Is 5V 12V 24V, Which Can Be Directly Entered Without Serial Resistor. The Input Frequency Must Maintain More Than 0.5 Seconds..
Features
- Input pulse level is 5V 12V 24V, which can be directly entered without serial resistor. The input frequency must maintain more than 0.5 seconds.
- Input pulse level is 5V 12V 24V, which can be directly entered without serial resistor. The input frequency must maintain more than 0.5 seconds.
- The frequency of the pulse 0HZ to 10KHZ converts into an analog voltage of 0-10V.
- Suitable for the switching of the PLC and the frequency converter.
- This module is easy to wire and convenient to use.
- inputs with optical coupling isolation, which can ensure that the capability of anti-interfence.
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 0.00 x 0.00 x 0.00 Inches | Weight: 0.04 Pounds
See On Amazon #4
Frequency to Voltage Converter 0-200Hz to 0-5V Inverter Digital to Analog Converter FV-200Hz5V F/V Conversion Module
Asin: B07ZP63ZRT | Ean: 0737983937459 | UPC: 737983937459
Application-- This Module Is Mainly Designed To Convert Interface Between Plc And Frequency, Or Movement Control Card And Converter Interface Matching Control Occasions..
High Quality-- Frequency To Voltage Converter Is Made Of High Quality Electronic Elements For Long Service Life. Input Pulse Level Is 5V 12V 24V Can Be Directly Input, No String Resistor. However, The Input Frequency Should Be Maintained For More Than 0.5 Seconds..
Feature-- If The Input Is Turbine Flow, Etc., Due To Matching, An 817 Diaphragm And A Resistor Must Be Added To Match The Flowmeter To Normal Function..
Application-- When Using The Correspondence, If There Is A Deviation, You Can Adjust The Blue Potentiometer On The Board To Adjust. At The Time Of Shipment, We Have Adjusted The F/V Potentiometer To A Certain Correspondence. It Is Generally Not Recommended To Adjust It By Itself..
Features
- QUICK RESPONSE-- Frequency and voltage conversion module has the characteristic of quick response, response time is about 0.3-0.5 seconds.
- APPLICATION-- When using the correspondence, if there is a deviation, you can adjust the blue potentiometer on the board to adjust. At the time of shipment, we have adjusted the F/V potentiometer to a certain correspondence. It is generally not recommended to adjust it by itself.
- APPLICATION-- This module is mainly designed to convert interface between PLC and frequency, Or movement control card and converter interface matching control occasions.
- FEATURE-- If the input is turbine flow, etc., due to matching, an 817 diaphragm and a resistor must be added to match the flowmeter to normal function.
- HIGH QUALITY-- Frequency to Voltage Converter is made of high quality electronic elements for long service life. Input pulse level is 5V 12V 24V can be directly input, no string resistor. However, the input frequency should be maintained for more than 0.5 seconds.
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 0.67 x 1.85 x 1.77 inches | Weight: 0.04 pounds
See On Amazon #5
Frequency to Voltage Conversion Module 0-5KHz to 0-5V F/V Conversion Module Digital to Analog Converter Module (0-5kHZ to 0-5V)
Asin: B078TNZS28 | Ean: 0736364871467 | UPC: 736364871467
Input Pulse Level Is 5V / 12V / 24V Can Be Directly Input, No Need To String Resistance. But The Input Signal Frequency, To Maintain More Than 0.5 Seconds..
Potentiometer Is Used To Calibrate The Frequency And Voltage Of The Corresponding Relationship..
The Output Current Is 5Ma. The Input Power Supply Voltage Range Is Dc12-30V..
Can Be Used For Plc And Inverter Interface Between The Conversion, Or Motion Control Card And Inverter Interface Matching Control Occasions..
Features
- Module function: 0Hz to 5KHz frequency pulse signal into 0-5V analog voltage signal.
- Can be used for PLC and inverter interface between the conversion, or motion control card and inverter interface matching control occasions.
- Input pulse level is 5V / 12V / 24V can be directly input, no need to string resistance. But the input signal frequency, to maintain more than 0.5 seconds.
- The output current is 5mA. The input power supply voltage range is DC12-30V.
- Potentiometer is used to calibrate the frequency and voltage of the corresponding relationship.
- See more on Amazon...
Brand: KNACRO | Manufacturer: KNACRO
See On Amazon #6
NOYITO Frequency to Voltage Converter Module 0Hz - 10Khz to 0-5V 0-10V Series Converter Module Digital to Analog Converter Module (0-5KHz to 0-10V)
Asin: B07TBW92HV | Model: FV5K10V | PartNumber: FV5K10V | Ean: 0680613662859 | UPC: 680613662859
Input Pulse Level Is 5V / 12V / 24V Can Be Directly Input, No Need To String Resistance. But The Input Signal Frequency, To Maintain More Than 0.5 Seconds.
Noyito Frequency To Voltage Converter Module User Manual Https://1Drv.Ms/B/S!Alzqucoyzqhkgqwptvpddzibjdfj?E=A40cdw.
The Output Current Is 5Ma. The Input Power Supply Voltage Range Is Dc12-30V..
Can Be Used For Plc And Inverter Interface Between The Conversion, Or Motion Control Card And Inverter Interface Matching Control Occasions..
Features
- Module function: 0Hz to 10KHz frequency pulse signal into 0-10V or 0-5V analog voltage signal.
- Can be used for PLC and inverter interface between the conversion, or motion control card and inverter interface matching control occasions.
- Input pulse level is 5V / 12V / 24V can be directly input, no need to string resistance. But the input signal frequency, to maintain more than 0.5 seconds
- The output current is 5mA. The input power supply voltage range is DC12-30V.
- NOYITO Frequency To Voltage Converter Module User Manual https://1drv.ms/b/s!AlzQUCOyZQhKgQwPtvPddziBJdFJ?e=a40CdW
- See more on Amazon...
Brand: NOYITO | Manufacturer: NOYITO
Dimensions: 0.39 x 1.97 x 1.77 inches | Weight: 0.04 Pounds
Warranty: Manufacturer's One-year After-sale Warranty
See On Amazon #7
Converter Module, FV-1KHz10V 0~1Khz to 0~10V Frequency Voltage Converter Module Digital to Analog Module
Asin: B07Z5P28D9 | Ean: 0739879149410 | UPC: 739879149410
Input Pulse Level Of 5/12/24V Can Be Directly Input Without Resistance.But Input Frequency Should Maintain More Than 0.5 Seconds..
The Module Is Stable And Has Great Performance While Using..
All Parts Of The Converter Module Are Well-Selected Of Good Durability And High Quality..
The Module Can Be Used For Interface Conversion Between Plc And Frequency Converter Or Matching Control Of Interface Between Motion Control Card And Frequency Converter..
Features
- The 0-1KHz frequency pulse is converted into a 0-10V analog voltage by this module.
- The module can be used for interface conversion between PLC and frequency converter or matching control of interface between motion control card and frequency converter.
- Input pulse level of 5/12/24V can be directly input without resistance.But input frequency should maintain more than 0.5 seconds.
- All parts of the converter module are well-selected of good durability and high quality.
- The module is stable and has great performance while using.
- See more on Amazon...
Brand: Yanmis | Manufacturer: Yanmis
Dimensions: 0.67 x 1.85 x 1.77 inches | Weight: 0.04 pounds
See On Amazon #8
Voltage to PWM Converter, 0-5V/0-10V Analog Input Voltage to 0-100% PWM Signal 2KHZ-20KHZ Converter Module
Asin: B07V3VHGXC | Ean: 0735752043738 | UPC: 735752043738
Default Function Is Converting 0-10V Into 0-100% 2Khz Pwm Signal; Output Frequency Can Be Set By Adjusting Potentiometer As Needed..
There Are Two Kinds Of Pwm Signal, Pnp-Pwm Output And Npn-Pwm Output;The Pnp-Pwm Output Is Only 5V Level, Npn-Pwm Output Is 5V And 24V Level..
Pwm Signal And Voltage Can Be Direct Ratio(Positive Phase Output) Or Inverse Ratio (Negative Phase Output)..
Pwm Signal Frequency Range Is 2Khz-20Khz, Maximum Is 20Khz, Default Minimum Is 2Khz..
Features
- This module can convert 0-5V or 0-10V analog input voltage into 0-100% PWM signal.
- PWM signal frequency range is 2KHZ-20KHZ, maximum is 20KHZ, default minimum is 2KHZ.
- Default function is converting 0-10V into 0-100% 2KHZ PWM signal; output frequency can be set by adjusting potentiometer as needed.
- PWM signal and voltage can be direct ratio(positive phase output) or inverse ratio (negative phase output).
- There are two kinds of PWM signal, PNP-PWM output and NPN-PWM output;the PNP-PWM output is only 5V level, NPN-PWM output is 5V and 24V level.
- See more on Amazon...
Brand: Sorandy | Manufacturer: Sorand
Dimensions: 0.79 x 1.97 x 1.97 inches
See On Amazon #9
Converter Module, FV-500Hz10V 0~500hz to 0~10V Frequency Voltage Converter Module Digital to Analog Module
Asin: B07Z5NT363 | Model: Yanmisqzpnxgdb9h | PartNumber: Yanmisqzpnxgdb9h | Ean: 0739879149397 | UPC: 739879149397
Input Pulse Level Of 5/12/24V Can Be Directly Input Without Resistance.But Input Frequency Should Maintain More Than 0.5 Seconds..
The Module Is Stable And Has Great Performance While Using..
All Parts Of The Converter Module Are Well-Selected Of Good Durability And High Quality..
The Converter Module Is To Convert 0~500Hz Digital Into 0~10V Analog ..
Features
- The module can be used for interface conversion between PLC and frequency converter or matching control of interface between motion control card and frequency converter.
- The converter module is to convert 0~500hz digital into 0~10V analog .
- Input pulse level of 5/12/24V can be directly input without resistance.But input frequency should maintain more than 0.5 seconds.
- All parts of the converter module are well-selected of good durability and high quality.
- The module is stable and has great performance while using.
- See more on Amazon...
Brand: Yanmis | Manufacturer: Yanmis
Dimensions: 0.67 x 1.85 x 1.77 Inches | Weight: 0.04 pounds
See On Amazon #10
Frequency to Voltage Converter Module 0~200hz to 0~10V Conversion Module Digital to Analog Converter
Asin: B07ZT4LLGD | Model: WALFRONT8aknmswc5i | PartNumber: WALFRONT8aknmswc5i | Ean: 0738582770225 | UPC: 738582770225
Good Perofrmance-- The Converter Module Adopts Professional And Practical Design For Premium Working Performance..
Feature-- Input Pulse Level Of 5/12/24V Can Be Directly Input Without Resistance.But Input Frequency Should Maintain More Than 0.5 Seconds..
Used For-- The Module Can Be Used For Interface Conversion Between Plc And Frequency Converter Or Matching Control Of Interface Between Motion Control Card And Frequency Converter..
Function-- The Converter Module Can Convert 0~200Hz Digital Into 0~10V Analog , Easy To Use.
Features
- HIGH QUALITY-- The module is made of premium material, with long lifespan and high realiability
- FUNCTION-- The converter module can convert 0~200hz digital into 0~10V analog , easy to use
- GOOD PEROFRMANCE-- The Converter Module adopts professional and practical design for premium working performance.
- USED FOR-- The module can be used for interface conversion between PLC and frequency converter or matching control of interface between motion control card and frequency converter.
- FEATURE-- Input pulse level of 5/12/24V can be directly input without resistance.But input frequency should maintain more than 0.5 seconds.
- See more on Amazon...
Brand: Walfront | Manufacturer: Eujgoov
Dimensions: 0.67 x 1.85 x 1.77 Inches | Weight: 0.04 pounds
See On Amazon
Looking For Something Else?
Search