12V LiFePO4 Lithium Battery for Power Wheels,12 Volt 8Ah Rechargeable Replacement Battery for Ride On Toys,Peg Perego Toys,Fish Finder
Asin: B0BHZ5G8DK
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.⚡【More Energy Power And Lighter Weight】The Lithium Iron Phosphate Battery Has Close To Four Times The Usable Capacity Of Regular Lead-Acid Batteries Without The Increase In Size Or Weight. Our 100Ah Lithium Battery Weighs Only 1.2Kg/2.64Lbs, Which Is Only 1/4 Of The Weight Of A Lead-Acid Battery, Easy To Move And Install. It Is An Ideal Choice For Outdoor Camping Power Supply And Simple Indoor Installation..
⚡【Long-Term And High-Quality After-Sales Service】 More Than 90 Days From The Date Of Purchase, And Within 4 Years, If Our Product Fails To Work Normally, The Consumer Assists Us In Completing All The Battery Testing , And Both Parties Connfirm That The Product Does Have Quality Problems, We Will Provide Returns And Exchanges To The Consumer For Free..
⚡【Capacity Expansion】 The Max Connection In Series Is : 4 Pcs Batteries To 48V, The Max Connection In Series/In Parallels: Support 4 Series And 4 Parallel (In The Case Of Simultaneous Series And Parallel Connection). The Max Connection In Parallels Is(In The Case Of Separate Parallel Connection, No Series Connection) : It Can Connect Multiple Batteries, And No More Than 10 Pcs In Parallel..
⚡【Bms Protection System】 The Unique Built-In Battery Management System (Bms) Of Our Products Lithium Battery Can Protect It From Overcharge, Deep Discharge, Overload,Overheating And Short Circuit, And Low Self-Discharge Rate..
Features
- LiFePO4 Long service life Lead-acid batteries usually only last 300-400 cycles, while our lithium-iron batteries can continue for more than 4000 cycles at 100% DoD up to 5000 cycles at 80% DoD. The service life is more than 10 times that of lead-acid batteries.
- BMS Protection System The unique built-in battery management system (BMS) of our products lithium battery can protect it from overcharge, deep discharge, overload,overheating and short circuit, and low self-discharge rate.
- More energy power and lighter weight the lithium iron phosphate battery has close to four times the usable capacity of regular lead-acid batteries without the increase in size or weight. Our 100Ah lithium battery weighs only 1.2kg/2.64lbs, which is only 1/4 of the weight of a lead-acid battery, easy to move and install. It is an ideal choice for outdoor camping power supply and simple indoor installation.
- Capacity expansion The Max connection in series is : 4 pcs batteries to 48V, the Max connection in series/in parallels: Support 4 series and 4 parallel (in the case of simultaneous series and parallel connection). The Max connection in parallels is(In the case of separate parallel connection, no series connection) : it can connect multiple batteries, and no more than 10 pcs in parallel.
- Long-term and high-quality after-sales service More than 90 days from the date of purchase, and within 4 years, If our product fails to work normally, the consumer assists us in completing all the battery testing , and both parties connfirm that the product does have quality problems, we will provide returns and exchanges to the consumer for free.
- See more on Amazon...
Brand: digi marker | Manufacturer: digi marker
Dimensions: 5.52 x 7.67 x 2.00 inches
See On Amazon Similar To 12V LiFePO4 Lithium Battery for
#1
Battleborn [Online Game Code]
Asin: B01946F2JY
Persistent Progression System: All Experience Points, Whether Earned Through Playing Battleborn’S Story Mode Or Competitive Multiplayer Modes, Contribute To Leveling Up Individual Character Rank, As Well As Player Profile Command Rank..
Helix System: Battleborn’S Accelerated Character Growth System Allows Players To Level-Up A Character From 1 To 10 And Fully Experience Each Hero’S Unique Weapons And Powers In A Single Story Mission Or Multiplayer Match..
Battleborn Heroes: Battleborn Has A Deep Roster Of 25 Playable Heroes And No Two Are The Same. Every Hero Has Their Own Personality And Comes Equipped With Their Own Unique Weapons And Powers..
Multiplayer: Battleborn’S Team-Based Competitive Multiplayer Action Can Be Experienced By Up To 10 Players Online In 5V5 Matches, And Includes Three Distinct Multiplayer Modes..
Features
- Story Mode: Battleborn s Story Mode is a narrative experience that can be played entirely singleplayer and is even better when it s played cooperatively with friends.
- Multiplayer: Battleborn s team-based competitive multiplayer action can be experienced by up to 10 players online in 5v5 matches, and includes three distinct multiplayer modes.
- Persistent Progression System: All experience points, whether earned through playing Battleborn s Story Mode or Competitive Multiplayer modes, contribute to leveling up individual Character Rank, as well as player profile Command Rank.
- Battleborn Heroes: Battleborn has a deep roster of 25 playable heroes and no two are the same. Every hero has their own personality and comes equipped with their own unique weapons and powers.
- Helix System: Battleborn s accelerated character growth system allows players to level-up a character from 1 to 10 and fully experience each hero s unique weapons and powers in a single story mission or multiplayer match.
- See more on Amazon...
First Available: 04/29/2016
Brand: 2K
See On Amazon #2
3S 4S 5A Active Equalizer Whole Group Balancer Lifepo4 Lipo Lto Lithium Active Battery Energy Transfer Equalization Capacitor + Protective Case
Asin: B09QKWH6RL | Model: 3S 4S | PartNumber: 3S 4S | Ean: 0602262884062 | UPC: 602262884062
[Protection Switch]: With Sleep Protection, When The Voltage Is Lower Than 3V, It Will Automatically Stop And Enter The Sleep State To Reduce The Damage To The Battery.With A Protective Case, It Can Better Protect 3S 4S 5A Active Equalizer And Extend Product Life..
[Satisfactory Service]:Protective Case Needs To Be Assembled By Yourself, We Provide 24-Hour Online Service,If You Encounter Any Problems, Please Email Seller Support (Not Amazon Support), We Will Give You A Perfect Solution..
[Original Design]:Using The Original Ultra-Low Internal Resistance Mos, 2Oz Copper Thickness Pcb, Equalizing Current 0-5.5A, The More Balanced The Battery, The Lower The Current.Voltage Is 1.8 V-4.5V ,Suggest Battery Capacity: 60-300Ah..
[Capacitance Principle]: No External Power Supply Is Required,The Working Principle Is Capacitor Fit Transfers The Charge Transporter, Use The Internal Energy Transfer Of The Battery To Transfer And Balance The Entire Battery Pack.The Equalization Board Can Be Connected To The Battery To Start The Equalization Work..
Features
- [Product Information]: Protective Case needs to be assembled by yourself,After the assembly is completed, tear off the outer yellow film.Before connecting the equalization board, check whether each piece of wiring is correct, insulation between the bottom board and the battery connection terminals is required to prevent burnout.Model:3S-4S Suitable : Lithium Iron Phosphate, NCM Ternary Polymer,(Not Fit Lithium Titanate).
- [Capacitance Principle]: No external power supply is required,The working principle is Capacitor fit transfers the charge transporter, use the internal energy transfer of the battery to transfer and balance the entire battery pack.the equalization board can be connected to the battery to start the equalization work.
- [Protection switch]: With sleep protection, when the voltage is lower than 3V, it will automatically stop and enter the sleep state to reduce the damage to the battery.With a protective case, it can better protect 3S 4S 5A Active Equalizer and Extend product life.
- [Original Design]:using the original ultra-low internal resistance MOS, 2OZ copper thickness PCB, equalizing current 0-5.5A, The more balanced the battery, the lower the current.Voltage is 1.8 V-4.5V ,Suggest Battery Capacity: 60-300AH.
- [Satisfactory service]:Protective Case needs to be assembled by yourself, We Provide 24-hour online service,If you encounter any problems, Please email SELLER SUPPORT (Not Amazon support), we will give you a perfect solution.
- See more on Amazon...
Brand: Cywhrvzsf | Manufacturer: Cywhrvzsf
See On Amazon #3
DALY BMS Parallel Module 1A with Smart BMS LiFePo4 16S 48V 250A Cooling Fan and CAN Port Smart BMS Bluetooth Dongle for Rated 3.2V Lithium Battery Packs Inverter UPS and Home Storage System
Asin: B0BC96R8FY | Ean: 0768617267222 | UPC: 768617267222
Basic Parameters: All 1A Parallel Module Dimensions In This Link Are The Same: 63 X 41 X 14 Mm, Bms Dimension Refer To The List Page, Current Limit: 1 A; Parallel Module Is Triggered By: 1 - Range To Overcharge Current Point At Warning Level 2 Or 2 Reach To Built-In/Preset Valve Value. Operating Temperature: -20℃~70℃ Parallel Module Release State: Discharge Communication Wire: 22Awg, Length = 300Mm.
Each Package --- Smart Bms With Can Communication Function + Balance Wire + Ntc + Bluetooth Module + 1A Matched Parallel Module + Communication Cable. And This Bms And Parallel Module Is Customized, Each Purchase Quantity Should Be At Least 415 Sets. !.
Intelligent And Easy Cabling --- All Bms With Uart + Rs485 + Can Function And Protocol, With Bluetooth Dongle And Daly Bms App, You Can Check All Real-Time Battery Parameters And Make The Correct Settings In Specific Areas. Do Not Connect The Parallel Module To The Bms Before All Balance Lines Wire Each Battery Cell. Please Connect Bms To The Battery First, And Then Connect The Parallel Module To Bms..
Application Note: Daly Bms + Daly Parallel Module Cannot Be Used Separately, Types And Strings Of The Bms + Parallel Module, Battery Packs Must Be Exactly The Same. For Example (3.2V Lifepo4 4S 12V 280Ah [Capacity May Vary A Little, Such As 280Ah + 120Ah] Battery Packs) + (Daly Smart Bms Lifepo4 4S 12V 100A + Daly 220A Parallel Module) Is Workable; Daly Parallel Module Cannot Be Used With Other Brands Of Bms Mmmmaly Bms You Have Bought Before Or Separately!.
Features
- Unique Protection --- Daly parallel module + Daly Bms is specially designed for parallel lithium packs, it is an integrated, combined customized parallel package protection. This combination can limit to mutual high charging current caused by the internal resistance and voltage difference between the parallel lithium batteries while charging the parallel packs. With Daly-BMS + Daly parallel module, higher voltage for electrical devices is safe and easy to achieve.
- Application note: Daly bms + DALY parallel module cannot be used separately, types and strings of the BMS + parallel module, battery packs must be exactly the same. For example (3.2V Lifepo4 4S 12V 280Ah [capacity may vary a little, such as 280Ah + 120Ah] battery packs) + (DALY smart bms lifepo4 4S 12V 100A + DALY 220A parallel module) is workable; Daly parallel module cannot be used with other brands of Bms mmmmAly Bms You have bought before or separately!
- Basic parameters: all 1A parallel module dimensions in this link are the same: 63 x 41 x 14 mm, bms dimension refer to the list page, current limit: 1 A; parallel module is triggered by: 1 - range to overcharge current point at warning level 2 or 2 reach to built-in/preset valve value. Operating Temperature: -20 ~70 Parallel Module Release State: Discharge Communication Wire: 22AWG, Length = 300mm
- Intelligent and easy cabling --- All Bms with UART + RS485 + CAN function and protocol, with Bluetooth dongle and DALY BMS app, you can check all real-time battery parameters and make the correct settings in specific areas. Do not connect the parallel module to the BMS before all balance lines wire each battery cell. Please connect BMS to the battery first, and then connect the parallel module to BMS.
- Each package --- Smart Bms with CAN communication function + balance wire + NTC + Bluetooth module + 1A matched parallel module + communication cable. And this BMS and parallel module is customized, each purchase quantity should be at least 415 sets. !
- See more on Amazon...
Brand: DALY | Manufacturer: Dongguan Daly Electronics Co., Ltd.
Dimensions: 2.05 x 4.72 x 9.25 inches
See On Amazon #4
RadioB Tech Smart BMS 4S 12V 120A Lifepo4 Lithium Battery Management PCB Protection Board with Balance Leads and Wireless Bluetooth Module - Supports 4 Cells 12.8 Volts DIY Programmable
Asin: B08SQL487S
Low Temperature Charging Cutoff - Prevents Damage To Lifepo4 Cells When The Temperature Is To Low To Charge.
Includes Bluetooth Module For Wireless App Connections To Monitor Battery Charge And Discharge Protection Of Lifepo4 Lithium Battery..
Monitor Pack And Cell Charge Level With Ios App Or Android App Using Included Bluetooth Board. Also Monitor Charge And Discharge Current..
Up To 120 Amp Continuous Charge Or Discharge Current. Perfect For Your High Current 12V Lifepo4 Battery Applications..
Features
- Supports 4 Cells - Lithium Lifepo4 - Build a high capacity LifePO4 battery from individual cells.
- Up to 120 amp continuous charge or discharge current. Perfect for your high current 12v lifepo4 battery applications.
- Low Temperature Charging cutoff - Prevents damage to LifePO4 cells when the temperature is to low to charge
- Monitor pack and cell charge level with IOS app or Android app using included Bluetooth board. Also monitor charge and discharge current.
- Includes Bluetooth module for wireless app connections to monitor battery charge and discharge protection of lifepo4 lithium battery.
- See more on Amazon...
Brand: RadioB Tech | Manufacturer: Generic
Dimensions: 0.67 x 5.43 x 4.02 Inches | Weight: 0.81 pounds
Warranty: 1 Year
See On Amazon #5
3S 4S 12V 5A Battery Active Equalizer BMS Balancer Lipo Li-ion LFP LiFePO4 Lithium Battery Balance Active Energy Transfer Equalization Module Faster Whole Group Capacitor Balancer PCB
Asin: B096NLHXPF | Model: JW-CAP-Balancer-4S | PartNumber: JW-CAP-Balancer-4S | Ean: 0723258876141 | UPC: 723258876141
The Quiescent Current Is About 9Ma, And The Battery Capacity Is Recommended To Be Used Between 30-200Ah/Per Balancer. High-Capacity Batteries Can Be Connected In Parallel With Multiple Equalizers..
【Note】: Before Connect The Balance Cable To The Balance Board, Be Sure To Check Whether The Connections Of Each Section Of The Battery Pack Are Correct, And Do A Good Job Of Insulating The Bottom Of The Board And The Battery String Connection Terminals. Otherwise, It Will Short-Circuit And Burn The Board. Tips: This Balancer Board Is Backward Compatible By Default. Eg. If It Is Used For 3S, The Last Line B4+ Is Empty..
With Under-Voltage Sleep Protection, Only Detecting The Battery Voltage Of B1, The Equalizer Will Automatically Stop Entering The Sleep State When The B1 Voltage Is Lower Than 2.7V, And The Standby Power Consumption Is Less Than 0.1Ma..
Working Principle: Flying Capacitor Transfer Charge Transporter, Balancer Board Is Connected To The Battery To Start The Balance Work, Using The Original Brand New Ultra-Low Internal Resistance Mos, 2Oz Copper Thickness Pcb. Balance Current 0-5.5A, The More Balanced The Battery Current Is Small, Reserved For The Dormant Switch Wiring Position, The Dormant Power-Off Mode Working Current Is Less Than 0.1Ma, And The Balance Voltage Accuracy Is Within 5Mv!.
Features
- Working Voltage: 2.7V-4.2V, suitable for NCM Ternary polymer lithium battery (Li-ion), lithium iron phosphate battery (LiFePO4). It can Not fit LTO battery. NOTE Tips Well tested by the manufacturer. As long as the wiring is correct, the product guarantees long-lasting and effective performance. Of course, if customers have any questions, they can take the initiative to contact us, we are absolutely capable of providing more professional answers, rather than a direct refund returns.
- Working Principle: Flying capacitor transfer charge transporter, Balancer board is connected to the battery to start the balance work, using the original brand new ultra-low internal resistance MOS, 2OZ copper thickness PCB. Balance current 0-5.5A, the more balanced the battery current is Small, reserved for the dormant switch wiring position, the dormant power-off mode working current is less than 0.1mA, and the balance voltage accuracy is within 5mv!
- The quiescent current is about 9mA, and the battery capacity is recommended to be used between 30-200AH/Per Balancer. High-capacity batteries can be connected in parallel with multiple equalizers.
- With under-voltage sleep protection, only detecting the battery voltage of B1, the equalizer will automatically stop entering the sleep state when the B1 voltage is lower than 2.7V, and the standby power consumption is less than 0.1mA.
- NOTE : Before connect the balance cable to the balance board, be sure to check whether the connections of each section of the battery pack are correct, and do a good job of insulating the bottom of the board and the battery string connection terminals. Otherwise, it will short-circuit and burn the board. Tips: This balancer board is backward compatible by default. eg. If it is used for 3S, the last line B4+ is empty.
- See more on Amazon...
Brand: QINIZX | Manufacturer: QINIZX
Dimensions: 0.63 x 2.61 x 1.80 Inches
Warranty: Manufacturer warranty for 90 days from date of purchase.
See On Amazon #6
MACIMO JK BMS 4S 5S 6S 7S 8S 200A Smart BMS Smart BMS Built-in Bluetooth APP Support LCD 12V 24V 3S (D)
Asin: B0BX3YG7ZJ | Model: 500349501A4 | PartNumber: 500349501A4 | Ean: 4712546219100
After Connected The Bms, Use The Power Supply Which Is 5V Battery To Activate It.
Working Condition: Workable Temperature: -20~70℃; Power Requirement: 24V~100V, It Could Be Worked By Battery Power Or External Power Supply; Power Dissipation: In Balance: 10Ma & 100V, No Balance: 6Ma & 100V.
200A Continuous Current, It Also Has 2A Active Equalization Current. It Can Set Up The Equalization And The Charge & Discharge Protection Parameter Through App, It Can Display The Single Series Of Battery.
Product Character: Active Balance Functionality, No Need To Lose The Battery Capacity To Balance The Difference Of Sells, Raise The Battery Usage Efficiency For 95%. It Can Be Used On 4-8S -/Cobalt Acid Lithium/Manganese Acid Lithium/Lithium Iron Battery Packs. It Has The Protections Of Over-Charge/Over-Discharge/Over-Current And Short Circuit Etc..
Features
- This is an Active BMS, it supports 3S-8S of and 4S-8S of LiFePo4
- Product character: Active balance functionality, no need to lose the battery capacity to balance the difference of sells, raise the battery usage efficiency for 95%. It can be used on 4-8s -/Cobalt acid lithium/Manganese acid lithium/Lithium iron battery packs. It has the protections of Over-charge/Over-discharge/Over-current and Short circuit etc.
- After connected the BMS, use the power supply which is 5v battery to activate it
- 200A continuous current, It also has 2A active equalization current. It can set up the equalization and the charge & discharge protection parameter through APP, It can display the single series of battery
- Working condition: Workable temperature: -20~70 ; Power requirement: 24V~100V, it could be worked by battery power or external Power supply; Power dissipation: In balance: 10mA & 100V, No balance: 6mA & 100V
- See more on Amazon...
Brand: MACIMO | Manufacturer: MACIMO
Dimensions: 1.57 x 5.51 x 3.15 inches | Weight: 1.04 pounds
See On Amazon #7
DALY Smart 4S BMS 12V with WiFi Module and CAN 485 Communication Protection Board for LifePO4 Lithium Battery Pack(4S 12V Smart BMS+RS485+CAN+WiFi Module 60A)
Asin: B0CXJCJF4Q | Ean: 0784868225477 | UPC: 784868225477
【Smart Bms】With The Wifi Module, Lithium Batteries Can Be Remotely Monitored Through The Internet, Regardless Of The Distance.When The Bms Detects Any Abnormality In The Battery Pack, It Will Send Alert Via The Smartphone App..
【Quality Guarantee】We Provide 1 Year Product Warranty,24-Hour One-On-One Customer Service And Lifetime Technical Support.If You Have Any Questions,Please Feel Free To Contact Us.--- Iso/ Fcc/ Rohs/ Pse/ Ce Approved.
【Daly Bms】Multiple Communication Functions+ Expansion Function Ports,Can, Rs485, Dual Uart Communication Interfaces,Rich Expansion Applications.If You Need Touch Screen,Active Balancer, Parallel Module Or Other Accessories, Please Contact Online Customer Service..
【New Upgrade】Smaller Size; Parallel Protection; Pre-Charging Function; 100Ma Passive Equalization Current; Low Temperature Rise; Working Condition Indicator;Consistent Chg/Dischg Cuurrent..
Features
- Multiple Protection Overcharge Protection; Overdischarge Protection; Overcurrent Protection; Short circuit Protection; Temperature Protection;Waterproof Protection.
- New Upgrade Smaller size; Parallel protection; Pre-charging function; 100mA passive equalization current; Low temperature rise; Working condition indicator;Consistent Chg/Dischg cuurrent.
- Smart BMS With the WiFi module, lithium batteries can be remotely monitored through the Internet, regardless of the distance.When the BMS detects any abnormality in the battery pack, it will send alert via the smartphone app.
- DALY BMS Multiple communication functions+ expansion function ports,CAN, RS485, dual UART communication interfaces,rich expansion applications.If you need Touch Screen,active balancer, parallel module or other accessories, please contact online customer service.
- Quality Guarantee We provide 1 year product warranty,24-hour one-on-one customer service and lifetime technical support.If you have any questions,please feel free to contact us.--- ISO/ FCC/ RoHS/ PSE/ CE APPROVED
- See more on Amazon...
Brand: DALY | Manufacturer: Dongguan Daly Electronics Co., Ltd
Dimensions: 0.55 x 4.84 x 2.56 inches
See On Amazon #8
5A 3S 4S 12V Battery Active Equalizer Whole Group Balancer LiFePO4 LFP Lipo Li-ion Lithium Active Battery Energy Transfer Equalization Capacitor Balancer PCB Module with Acrylic Protective Case
Asin: B0BBRNF823 | Model: JWCABalancer-4S | PartNumber: JWCABalancer-4S | Ean: 0789513999000 | UPC: 789513999000
The Quiescent Current Is About 12Ma, And The Battery Capacity Is Recommended To Be Used Between 30-300Ah!.
Note: Before Connect The Balance Cable To The Balance Board, Be Sure To Check Whether The Connections Of Each Section Of The Battery Pack Are Correct, And Do A Good Job Of Insulating The Bottom Of The Board And The Battery String Connection Terminals. Otherwise, It Will Short-Circuit And Burn The Board..
With Under-Voltage Sleep Protection, Only Detecting The Battery Voltage Of B1, The Equalizer Will Automatically Stop Entering The Sleep State When The B1 Voltage Is Lower Than 2.7V, And The Standby Power Consumption Is Less Than 0.1Ma..
Working Principle: Flying Capacitor Transfer Charge Transporter, Balancer Board Is Connected To The Battery To Start The Balance Work, Using The Original Brand New Ultra-Low Internal Resistance Mos, 2Oz Copper Thickness Pcb, Balance Current 0-5.5A, The More Balanced The Battery Current Is Small, Reserved For The Dormant Switch Wiring Position, The Dormant Power-Off Mode Working Current Is Less Than 0.1Ma, And The Balance Voltage Accuracy Is Within 5Mv!.
Features
- Working Voltage: 2.7V-4.2V, suitable for NCM Ternary polymer lithium battery (Li-ion), lithium iron phosphate battery (LiFePO4). It can Not fit LTO battery. If it is used for 3S, the last line B4+ is empty. (Note: The default protective case is a kit, not assembled, the transparent acrylic case has a yellow protective film that can be peeled off. )
- Working Principle: Flying capacitor transfer charge transporter, Balancer board is connected to the battery to start the balance work, using the original brand new ultra-low internal resistance MOS, 2OZ copper thickness PCB, balance current 0-5.5A, the more balanced the battery current is Small, reserved for the dormant switch wiring position, the dormant power-off mode working current is less than 0.1mA, and the balance voltage accuracy is within 5mv!
- The quiescent current is about 12mA, and the battery capacity is recommended to be used between 30-300AH!
- With under-voltage sleep protection, only detecting the battery voltage of B1, the equalizer will automatically stop entering the sleep state when the B1 voltage is lower than 2.7V, and the standby power consumption is less than 0.1mA.
- Note: Before connect the balance cable to the balance board, be sure to check whether the connections of each section of the battery pack are correct, and do a good job of insulating the bottom of the board and the battery string connection terminals. Otherwise, it will short-circuit and burn the board.
- See more on Amazon...
Brand: XFYBZN | Manufacturer: XFYBZN
Dimensions: 0.63 x 2.60 x 1.80 inches | Weight: 0.22 Pounds
Warranty: Manufacturer warranty for 90 days from date of purchase.
See On Amazon #9
VNSZNR LiFePO4 BMS 4S 12V 100A Lithium Iron Phosphate Battery Management System PCB Protection Board with Balance Leads Wires for LiFePO4 3.2V Cells Battery Pack
Asin: B0987Z8JLZ
★【Multiple Protection】Over-Charging Protection. Over-Discharging Protection. Over-Current Protection. Temperature Protection. Disconnect Protection. Short Circuit Protection. Short Circuit Protect Recover. Balance Function..
★【What You Get】1Pcs*Vnsznr 4S 100A Bms; 1Pcs*Balance Cable; 1Pcs*English User Manual, Package Also Come With B- And P- Cable, 36-Months Warranty And Friendly Customer Service. Quality Guarantee--- Iso/ Fcc/ Rohs/ Pse/ Ce Approved..
★【Heavy Duty】Vnsznr Lifepo4 Bms Use High Anti-Corrosion, High Water Resistance, High Impedance Esd Conformal Coating.It Is Waterproof, Dustproof And Shockproof..
★【Lifepo4 Bms】Single Overcharge Protection Voltage Is About 3.75V. Single Over-Release Protection Voltage Is About 2.1V. Working Temp: - 20 ℃ ~ 70 ℃ / - 4 ℉ ~ 158 ℉..
Features
- VNSZNR LiFePO4 BMS The BMS was be manufactured by high quality Mos and IC. Keep your battery long cycle service life time. Extreme low power consumption. The consumption of the whole device is less than 50uA.
- LiFePO4 BMS Single overcharge protection voltage is about 3.75V. Single over-release protection voltage is about 2.1V. Working temp: - 20 ~ 70 / - 4 ~ 158 .
- Multiple protection Over-charging protection. Over-discharging protection. Over-current protection. Temperature protection. Disconnect protection. Short Circuit Protection. Short Circuit protect recover. Balance Function.
- Heavy Duty VNSZNR Lifepo4 BMS use high anti-corrosion, high water resistance, high impedance ESD conformal Coating.It is waterproof, dustproof and shockproof.
- What You Get 1pcs*VNSZNR 4S 100A BMS; 1pcs*balance cable; 1pcs*English user manual, Package also come with B- and P- cable, 36-months warranty and friendly customer service. Quality Guarantee--- ISO/ FCC/ RoHS/ PSE/ CE APPROVED.
- See more on Amazon...
Brand: VNSZNR | Manufacturer: VNSZNR
Dimensions: 2.60 x 6.50 x 0.90 Inches | Weight: 1.17 Pounds
Warranty: Warranty for 36 months from date of purchase（The warranty service is only valid under normal use.）
See On Amazon #10
12V 100A 4Series BMS Protection Board with Balancing with Overcharge/Overdischarge/Overcurrent/Short Circuit Protection for LiFePO4 Battery Pack
Asin: B07511RJ9S | Model: 4330198367 | PartNumber: 4330198367 | Ean: 0736691475918 | UPC: 736691475918
Multiple Protction Functions Allows Glossy Better Expeience: This Waterproof Bms Multiple Protective Functions Including Overcharge Protection, Overdischarge Protection, Overcurrent Protection And Short Circuit Protection.
Balance Function: This Lifepo4 Bms Lithium Balance Board Is Equipped With Equilibrium Function To Keep Each Cell In Balance And Good Service Life.
Essential Part For Circuit Board: Protection Circuit Board Is The Heart Of Battery Pack, Must To Have To Avoid Battery Pack From Explosion, Fire And Damage.
Features
- Convenient to Operate: This Lithium BMS is designed for 4 series 12V LiFePO4 batteries, comes with 5P-250mm wire for convenient use
- Essential Part for Circuit Board: Protection circuit board is the heart of battery pack, must to have to avoid battery pack from explosion, fire and damage
- Multiple Protction Functions Allows Glossy Better Expeience: This Waterproof BMS Multiple protective functions including overcharge protection, overdischarge protection, overcurrent protection and short circuit protection
- Balance Function: This lifepo4 bms lithium Balance Board is equipped with equilibrium function to keep each cell in balance and good service life
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.11 pounds
See On Amazon #11
Walfront Battery Active Equalizer Balancer Board Universal Energy Transfer Balancer 12 16S for LTO LPO LFP 1.8V 4.5V
Asin: B09RX1GR4R | Model: Walfront0ghzkvoens6419 | PartNumber: Walfront0ghzkvoens6419
Working Current: Balance Current 0‑5.5A, The More Balanced The Smaller The Current, And The Sleep Mode Current Is Less Than 0.1Ma..
Applicable Battery: The Quiescent Current Is About 12Ma, Recommended To Use Battery With A Capacity Of 60‑300Ah..
Working Voltage: The Working Voltage Is 1.8V‑4.5V, The Balance Voltage Accuracy Is Within 5Mv, With High Efficiency..
High Performance: Adopt New Ultra Low Internal Resistance Mos, And 2Oz Copper Thickness Pcb, Stable In Transmission..
Features
- EASY OPERATION: Connect the lithium battery balance board to the top of the battery to start the balance work.
- HIGH PERFORMANCE: Adopt new ultra low internal resistance MOS, and 2oz copper thickness PCB, stable in transmission.
- WORKING CURRENT: Balance current 0 5.5A, the more balanced the smaller the current, and the sleep mode current is less than 0.1mA.
- WORKING VOLTAGE: The working voltage is 1.8V 4.5V, the balance voltage accuracy is within 5mv, with high efficiency.
- APPLICABLE BATTERY: The quiescent current is about 12mA, recommended to use battery with a capacity of 60 300AH.
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
See On Amazon #12
100Balance 5A Battery Active Equalizer Balancer 14S for Lifepo4 or NCM Li-ion Lithium Battery Group BMS Energy Transfer Board with Blue ABS Case(14S)
Asin: B0CHYTCJ7L | Ean: 0725414469921 | UPC: 725414469921
Equalized Energy Dissipation Without Internal Resistance And Low Heat Generation For Long Time Connection To The Battery Pack..
We Provide 1 Year Product Warranty And 24/7 Online Service For Your Inquiry, Please Feel Free To Contact Us..
It Can Be Used In The Field Of Power Batteries (Electric Vehicles, Forklifts, Agvs, Cleaning Vehicles, Etc.), And Can Also Be Used In The Field Of Energy Storage (Outdoor Power Supply, Rv, Home Energy Storage, Base Station, Photovoltaic, Etc.).
Suitable For 3-16S Li-Ion Battery Pack And Lifepo4 Battery Pack. Please Note The Battery Strings Must Be Matched To The Active Balancer Strings..
Features
- This is an active equalization module for lithium batteries, which can be compatible with all other brands of BMS.
- Suitable for 3-16S Li-ion battery pack and LiFepo4 battery pack. Please note the battery strings must be matched to the active balancer strings.
- Equalized energy dissipation without internal resistance and low heat generation for long time connection to the battery pack.
- It can be used in the field of power batteries (electric vehicles, forklifts, AGVs, cleaning vehicles, etc.), and can also be used in the field of energy storage (outdoor power supply, RV, home energy storage, base station, photovoltaic, etc.)
- We provide 1 year product warranty and 24/7 online service for your inquiry, please feel free to contact us.
- See more on Amazon...
Brand: 100 BALANCE | Manufacturer: Dongguan Balanced Management Technology Co., Ltd
Dimensions: 0.83 x 6.42 x 2.56 inches
See On Amazon #13
3S 4S 5.5A Capacitor Active Equalizer Balancer Lifepo4 Lithium Lipo Battery Energy Transfer Active Equalization Whole Group Balancer
Asin: B09MS8Z58H | Model: JWCABalancer-4S | PartNumber: JWCABalancer-4S | Ean: 0721927465870 | UPC: 721927465870
The Quiescent Current Is About 12Ma, And The Battery Capacity Is Recommended To Be Used Between 30-300Ah!.
Note: Before Connect The Balance Cable To The Balance Board, Be Sure To Check Whether The Connections Of Each Section Of The Battery Pack Are Correct, And Do A Good Job Of Insulating The Bottom Of The Board And The Battery String Connection Terminals. Otherwise, It Will Short-Circuit And Burn The Board..
With Under-Voltage Sleep Protection, Only Detecting The Battery Voltage Of B1, The Equalizer Will Automatically Stop Entering The Sleep State When The B1 Voltage Is Lower Than 2.7V, And The Standby Power Consumption Is Less Than 0.1Ma..
Working Principle: Flying Capacitor Transfer Charge Transporter, Balancer Board Is Connected To The Battery To Start The Balance Work, Using The Original Brand New Ultra-Low Internal Resistance Mos, 2Oz Copper Thickness Pcb, Balance Current 0-5.5A, The More Balanced The Battery Current Is Small, Reserved For The Dormant Switch Wiring Position, The Dormant Power-Off Mode Working Current Is Less Than 0.1Ma, And The Balance Voltage Accuracy Is Within 5Mv!.
Features
- Working Voltage: 2.7V-4.2V, suitable for NCM Ternary polymer lithium battery (Li-ion), lithium iron phosphate battery (LiFePO4). It can Not fit LTO battery. If it is used for 3S, the last line B4+ is empty.
- Working Principle: Flying capacitor transfer charge transporter, Balancer board is connected to the battery to start the balance work, using the original brand new ultra-low internal resistance MOS, 2OZ copper thickness PCB, balance current 0-5.5A, the more balanced the battery current is Small, reserved for the dormant switch wiring position, the dormant power-off mode working current is less than 0.1mA, and the balance voltage accuracy is within 5mv!
- The quiescent current is about 12mA, and the battery capacity is recommended to be used between 30-300AH!
- With under-voltage sleep protection, only detecting the battery voltage of B1, the equalizer will automatically stop entering the sleep state when the B1 voltage is lower than 2.7V, and the standby power consumption is less than 0.1mA.
- Note: Before connect the balance cable to the balance board, be sure to check whether the connections of each section of the battery pack are correct, and do a good job of insulating the bottom of the board and the battery string connection terminals. Otherwise, it will short-circuit and burn the board.
- See more on Amazon...
Brand: XFYBZN | Manufacturer: XFYBZN
Dimensions: 1.33 x 3.63 x 3.05 inches | Weight: 0.13 pounds
Warranty: 60-day warranty
See On Amazon #14
RadioB Tech Smart BMS 4S 12V Lifepo4 Lithium Battery Management PCB Protection Board with Balance Leads and Wireless Bluetooth Module - Supports 4 Cells 12.8 Volts DIY Programmable (200A)
Asin: B0CHY32YZL
Low Temperature Charging Cutoff - Prevents Damage To Lifepo4 Cells When The Temperature Is To Low To Charge.
Includes Bluetooth Module For Wireless App Connections To Monitor Battery Charge And Discharge Protection Of Lifepo4 Lithium Battery..
Monitor Pack And Cell Charge Level With Ios App Or Android App Using Included Bluetooth Board. Also Monitor Charge And Discharge Current..
Bms For 4 Cells 12 Volt - Lithium Lifepo4 - Build A High Capacity Lifepo4 Battery From Individual Cells..
Features
- Supports up to 200 amps of continuous charge or discharge current. Perfect for your high current 12v lifepo4 battery applications.
- BMS for 4 Cells 12 volt - Lithium Lifepo4 - Build a high capacity LifePO4 battery from individual cells.
- Low Temperature Charging cutoff - Prevents damage to LifePO4 cells when the temperature is to low to charge
- Monitor pack and cell charge level with IOS app or Android app using included Bluetooth board. Also monitor charge and discharge current.
- Includes Bluetooth module for wireless app connections to monitor battery charge and discharge protection of lifepo4 lithium battery.
- See more on Amazon...
Brand: RadioB Tech | Manufacturer: RadioB Tech
See On Amazon #15
Demonfire 18350 1200mAh 3.7V High Drain LiMn IMR Rechargeable Battery with Button Top (2 Pieces) & Demonfire D1 Charger
Asin: B07237GNFC | Model: 4330202337 | PartNumber: 4330202337 | Ean: 0881314256600 | UPC: 881314256600
Charger Is Compatible With The Following Imr/Li-Ion/Lifepo4 Batteries: 18650, 18500, 18490, 18350, 17670, 17500, 16340, 14500, 10440.
Input: Ac 100-240V 50/60Hz 0.2A, Dc 8-12V 1A, Output: 3V 0.5A, 4.2V 0.5A.
Overvoltage, Overcurrent, Short Circuit, And Reverse Battery Protection.
Amp Limit: 10.5A, Voltage: 3.7V, Type: Button Top.
Features
- Battery has long-lasting 1200mAh capacity
- Amp Limit: 10.5A, Voltage: 3.7V, Type: Button Top
- Charger is compatible with the following IMR/Li-ion/LiFePO4 batteries: 18650, 18500, 18490, 18350, 17670, 17500, 16340, 14500, 10440
- Overvoltage, overcurrent, short circuit, and reverse battery protection
- Input: AC 100-240V 50/60Hz 0.2A, DC 8-12V 1A, Output: 3V 0.5A, 4.2V 0.5A
- See more on Amazon...
Brand: Demonfire | Manufacturer: Demonfire
See On Amazon #16
JK BMS Battery Equalizer JK Smart BMS 1A 2A Active Balance 4S 8S 16S 20S 24S 60A 100A 150A 200A 12V 24V for Camping Power Bank Lifepo4 Battery Battery Protection Module (Color : JK-B2A8S20P, Size :
Asin: B0CXCTQ9TX | Model: CHUNYE | PartNumber: CHUNYE | Ean: 7322565693859
🔋【Full Functionality】Jk Bms Protects Against Over-Charge/Over-Discharge/Over-Current And Short Circuit, Low Temperature Charging Cutoff..
🔋【Use Safety】Unique Design Choosing The Correct Protection Board And Applying It Appropriately Is Vital To The Longevity Your Batteries..
🔋【Widely Use】Support 12V/4S,24V/8S,48V/16S,72V/24S,100A-350A Max Current Lifepo4 Battery System, And 0.6-2A Active Balance Current, Will Be The Perfect Choice For Your Diy System..
🔋【Jk Active Balance】Jk Smart Active Balance The Voltage Differences Between The Battery Cells, Raising The Battery Usage Efficiency To 99%, Providing The Battery A Longer Life..
Features
- JK Own Development APP JK BMS has its APP for more BMS settings and with BT communication, the battery's real-time status can be displayed precisely on your phone.
- JK Active Balance JK Smart active balance the voltage differences between the battery cells, raising the battery usage efficiency to 99%, providing the battery a longer life.
- Full Functionality JK BMS protects against over-charge/over-discharge/over-current and short circuit, low temperature charging cutoff.
- Widely Use Support 12V/4S,24V/8S,48V/16S,72V/24S,100A-350A max current lifepo4 battery system, and 0.6-2A active balance current, will be the perfect choice for your DIY system.
- USE SAFETY UNIQUE DESIGN Choosing the correct protection board and applying it appropriately is vital to the longevity your batteries.
- See more on Amazon...
Brand: CHUNYE | Manufacturer: CHUNYE
Weight: 1.10 pounds
See On Amazon #17
Flylin 1Pcs Battery Protection Board, 4S 100A 12V BMS Battery Protection Board with w/Balance LiFePO4 Lithium Iron Phosphate Charging Controller LFP (4S 100A 12V)
Asin: B0BLVMGH6G
Balance Function: With Equilibrium Function To Keep Each Cell In Balance And Good Service Life.
High Performance: Stable Various Protective Functions For Charging And Discharging, Such As Overcharge Protection, Over-Discharge Protection And Short Circuit Protection.Choosing The Correct Protection Board And Applying It Appropriately Is Vital To The Longevity Your Batteries.
Easy To Use: Used For 4 Series 12V Lifepo4 Batteries, Comes With 5P-250Mm Wires.
Product Role: It Will Protect Battery Pack From Overcharging, Over-Discharging Over-Current And Short Circuit.
Features
- Safety: Protection circuit board is the heart of battery pack, must to have to avoid battery pack from explosion, fire and damage
- Product role: It will protect battery pack from overcharging, over-discharging over-current and short circuit
- Balance Function: With equilibrium function to keep each cell in balance and good service life
- Easy to Use: Used for 4 series 12V LiFePO4 batteries, comes with 5P-250mm wires
- High Performance: Stable various protective functions for charging and discharging, such as overcharge protection, over-discharge protection and short circuit protection.Choosing the correct protection board and applying it appropriately is vital to the longevity your batteries
- See more on Amazon...
Brand: Flylin | Manufacturer: Flylin
Weight: 0.09 pounds
Warranty: No
See On Amazon #18
AOICRIE 3S 12V 40A PCB BMS Protection Board for 18650 Li-ion Lithium Battery Cell Module
Asin: B08NB5SP7D | Ean: 0701715443358, 0701715443341 | UPC: 701715443341, 701715443358
Support Overcharge Protection,Overdischarge Protection,Overcurrent Protection And Short Circuit Protection..
Stable Charging And Discharging The Various Protection Features Such As Precise Overcharge Protection,Overdischarge Protection,Overcurrent Protection And Short Circuit Protection..
This Protection Board Is Suitable For 3 Series 3.7V 18650 Li-Ion Cell.Charging Connector And Discharging Connector Are Separated..
The Protection Board Is For Cell Li-Ion Batteries, It Can Be Used For Ternary Batteries, Manganese Acid Batteries And Cobalt Acid Batteries..
Features
- This protection board is suitable for 3 series 3.7V 18650 li-ion cell.
- The protection board is for cell Li-ion batteries, it can be used for ternary batteries, manganese acid batteries and cobalt acid batteries.
- Support overcharge protection,overdischarge protection,overcurrent protection and short circuit protection.
- This protection board is suitable for 3 series 3.7V 18650 Li-ion cell.Charging connector and discharging connector are separated.
- Stable charging and discharging the various protection features such as precise overcharge protection,overdischarge protection,overcurrent protection and short circuit protection.
- See more on Amazon...
Brand: AOICRIE | Manufacturer: AOICRIE
Weight: 0.21 pounds
See On Amazon #19
Demonfire 10440 600mAh 3.7V High Drain Li-Ion Rechargeable Battery with Button Top (4 Pieces) & Demonfire D1 Charger
Asin: B07CRR6BTW | Ean: 0713289073534 | UPC: 713289073534
Charger Is Compatible With The Following Imr/Li-Ion/Lifepo4 Batteries: 18650, 18500, 18490, 18350, 17670, 17500, 16340, 14500, 10440.
Input: Ac 100-240V 50/60Hz 0.2A, Dc 8-12V 1A, Output: 3V 0.5A, 4.2V 0.5A.
Overvoltage, Overcurrent, Short Circuit, And Reverse Battery Protection.
Voltage: 3.7V, Type: Button Top.
Features
- Battery has long-lasting 600mAh capacity
- Voltage: 3.7V, Type: Button Top
- Charger is compatible with the following IMR/Li-ion/LiFePO4 batteries: 18650, 18500, 18490, 18350, 17670, 17500, 16340, 14500, 10440
- Overvoltage, overcurrent, short circuit, and reverse battery protection
- Input: AC 100-240V 50/60Hz 0.2A, DC 8-12V 1A, Output: 3V 0.5A, 4.2V 0.5A
- See more on Amazon...
Brand: Demonfire | Manufacturer: Demonfire
Weight: 0.02 pounds
See On Amazon #20
3PCS 4S 30A 12.8V BMS PCB 18650 Battery Protection Board LiFePo4 Life 4S BMS Balancing Charging Circuit PCB Board
Asin: B09Z6N4CBN | Ean: 0701715491892 | UPC: 701715491892
Charge:Charging Voltage: 14.8V; Charging Current: 20A (Max)..
Self-Consumption:Working Current: ≤30Ua; Sleep Current (When Over-Discharge): ≤20Ua; Working Temperature Range: -30+80°.
Balance:Detect Voltage: 3.60±0.05V; Release Voltage: 3.59±0.05V; Balance Current: 58Ma..
Discharge: Continuous Discharging Current: 30A(Max); Instantaneous Discharge Current: 56A.
Features
- This board is 4 string 3.2V Lithium iron phosphate battery protection board; High current protection board, continuous 30A current, with balance circuit, The board comes with cable. PCB Board Size: 56x47mm/2.2x1.85".
- Discharge: Continuous Discharging Current: 30A(MAX); Instantaneous Discharge Current: 56A
- Charge:Charging Voltage: 14.8V; Charging Current: 20A (MAX).
- Balance:Detect Voltage: 3.60 0.05V; Release Voltage: 3.59 0.05V; Balance Current: 58mA.
- Self-Consumption:Working Current: 30uA; Sleep Current (when Over-discharge): 20uA; Working Temperature Range: -30+80
- See more on Amazon...
Brand: QCCAN | Manufacturer: QCCAN
Warranty: no warranty
See On Amazon
Looking For Something Else?
Search