Table Saw Fence Parallel Positioning Tool, Aluminum Alloy Saw Blade Alignment Jig Table Saw Indicator Gauge Woodworking Aligning and Calibrating Adjustable Limit Pin Positioning Ruler
Asin: B0BJ23C6CG
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Repeat Cuts: When You Have Your Fence Set For A Certain Critical Cut, But You Have To Change It For Something Else. When You Need The Fence Back At The Same Spot, Just Slide The Simple Set Back In The Track And Reset Your Fence..
Simple Set Fence Gauges Fit In Your Table Saw Miter Slot And Hold An Extendable Stainless Steel Touch-Off Probe Perpendicular To The Slot. Just Slide The Probe Until It Touches Your Fence, Lock The Thumbwheel And That' S It - A Physical Reference Between The Miter Slot And The Fence..
Easy To Use: You Just Need To Slide The Probe Until It Touches Your Fence To Check Your Saw Blade To Miter Slot Alignment, And Lock The Thumbwheel. A Simple Set Of Fence Gauges Fit In Your Table Saw Miter Slot And Hold An Extendable Stainless Steel Touch-Off Probe Perpendicular To The Slot..
Fence Alignment: Before It Works, Please Either Set Or Confirm The Alignment Of Your Fence To Your Table, Then Lock It And Make A Mark On The Fence Where The Probe Touches..
Features
- Size: Precision steel pin is 350mm/13.78 inch; Fixed block is 54x105mm/2.13x4.13 inch. Our simple set works with any table saw that has a miter slot nominally 3/8" x 3/4".
- Fence Alignment: Before it works, please either set or confirm the alignment of your fence to your table, then lock it and make a mark on the fence where the probe touches.
- Repeat Cuts: When you have your fence set for a certain critical cut, but you have to change it for something else. When you need the fence back at the same spot, just slide the Simple Set back in the track and reset your fence.
- Easy to Use: You just need to slide the probe until it touches your fence to check your saw blade to miter slot alignment, and lock the thumbwheel. A simple set of fence gauges fit in your table saw miter slot and hold an extendable stainless steel touch-off probe perpendicular to the slot.
- Simple set fence gauges fit in your table saw miter slot and hold an extendable stainless steel touch-off probe perpendicular to the slot. Just slide the probe until it touches your fence, lock the thumbwheel and that' s it - a physical reference between the miter slot and the fence.
- See more on Amazon...
Brand: CDIYTOOL | Manufacturer: newbounce
Dimensions: 1.60 x 13.78 x 4.13 inches
See On Amazon Similar To Table Saw Fence Parallel Positioning
#1
POWERTEC 71367 3-Inch Fence Flip Stop for Woodworking, Blue
Asin: B07RJBCS46 | Model: 71367 | PartNumber: 71367 | Ean: 0843441103028 | UPC: 843441103028
Features: A User-Friendly Design With An Arm That Conveniently Flips Down When Needed And Stays Concealed When Not In Use, Plus It Slides Up And Down Any Fence With A Top-Mounted T-Track And Comfortably Locks Down With A 1" Dia Knob. The Stop Can Be Converted From The Inboard To The Out Board Position And The Flip Arm Can Be Set For The Right Or Left Side Of The Body..
Build: Possesses A High Quality Die Cast Aluminum Construction And Finished With A Smooth Blue Anodized Coating For Wear Resistance And Long Term Use.
Note: This Item Is Designed To Work With Universal Or Double Cut T-Track, Which Has A 23/64” Wide Top Slot. It Will Not Fit Mini Or ¼” T-Track Which Has A Top Slot ¼” Wide. Please Verify The Size Of Your T-Track Before Ordering..
Universal: Works On Single, Double And Multi-Track Assemblies - Perfect For An Assortment Of Woodworking And Router Table Projects, Such As Making Odd Cuts Or For Updating Your Cross Cut Sleds, And Other Task (Without The Need For Changing Settings).
Function: Creates Optimized Fence-Top Setups In Your Universal T-Track Assemblies, Allowing You To Set Them To Your Desired Measurement Requirements And Make Repetitive Cuts And Drills Without Remeasuring.
Features
- INCLUDES: (1) T-Track Flip Fence Stop (3 inches) with 5/16" T-Bolt
- FUNCTION: Creates optimized fence-top setups in your universal t-track assemblies, allowing you to set them to your desired measurement requirements and make repetitive cuts and drills without remeasuring
- FEATURES: A user-friendly design with an arm that conveniently flips down when needed and stays concealed when not in use, plus it slides up and down any fence with a top-mounted t-track and comfortably locks down with a 1 dia knob. The stop can be converted from the inboard to the out board position and the flip arm can be set for the right or left side of the body.
- UNIVERSAL: Works on single, double and multi-track assemblies - perfect for an assortment of woodworking and router table projects, such as making odd cuts or for updating your cross cut sleds, and other task (without the need for changing settings)
- BUILD: Possesses a high quality die cast aluminum construction and finished with a smooth blue anodized coating for wear resistance and long term use
- Note: This item is designed to work with Universal or Double Cut T-Track, which has a 23/64 wide top slot. It will not fit Mini or T-Track which has a top slot wide. Please verify the size of your T-Track before ordering.
- See more on Amazon...
Brand: POWERTEC | Manufacturer: POWERTEC
Dimensions: 1.50 x 6.50 x 4.50 inches | Weight: 0.35 pounds
See On Amazon #2
BORA 100" NGX Clamp Edge, Straight Cut Guide for Circular Saws, Aluminum, Includes 50-Inch Clamp Edge & 50-Inch Extension for 100-Inch Cutting Length, 544100
Asin: B081464VDN | Model: 544100 | PartNumber: 544100 | Ean: 0814000019470 | UPC: 814000019470
Robust Build: Crafted From Durable Aluminum, Providing A Reliable And Accurate Rip Cut Circular Saw Guide On The Jobsite, In The Garage Or On Your Diy Projects.
Includes Bora Ngx 50-Inch Clamp Edge And Bora Ngx 50-Inch Extension Piece With Connectors With Large Ergonomic Locking Handle And Clamp Faces For A Secure Grip.
Universal And Portable: Use The Bora Track Saw Guide Rail With Circular Saws, Routers, Jig Saws, And Other Portable Power Tools When Straight Cuts Are Required.
T-Track Integration: Features Integrated T Tracks For Accessories, Expanding Functionality And Customization. Instantly Add A T Track To Your Bench Or Worksurface.
Features
- Precision Cutting: Bora NGX Clamping Straight Edge 544100 ensures accurate rip cuts with its straight edge, up to 100 inch Clamping Capacity, and clamps securely
- T-Track Integration: Features integrated T tracks for accessories, expanding functionality and customization. Instantly add a T Track to your bench or worksurface
- Robust Build: Crafted from durable aluminum, providing a reliable and accurate rip cut circular saw guide on the Jobsite, in the Garage or on your DIY Projects
- Universal and portable: Use the Bora Track saw guide rail with Circular saws, Routers, Jig saws, and other portable power tools when straight cuts are required
- Includes Bora NGX 50-inch clamp edge and Bora NGX 50-inch extension piece with connectors with large ergonomic locking handle and clamp faces for a secure grip
- See more on Amazon...
Brand: Bora | Manufacturer: Bora
Dimensions: 0.75 x 100.00 x 3.00 Inches | Weight: 3.97 Pounds
Warranty: 1 year
See On Amazon #3
BORA 50 NGX Clamp Edge, Straight Cut Guide for Circular Saws, Easy to Use, Great for Cross-Cutting Plywood Sheets and Routing Dados, 544050
Asin: B08146J2T8 | Model: 544050 | PartNumber: 544050 | Ean: 0814000019456 | UPC: 814000019456
Extreme Durability: Made Of Heavy-Gauge, Extruded Aluminum, It Is Rigid Enough To Resist Bowing And Hold A Straight Edge, And Durable Enough To Withstand Repeated Use.
Use With Any Circular Saw: This Guide Is Compatible With Any Brand Of Circular Saw, Not Just Bora Tools. Use It With Circular Saws, Routers, And Jigsaws. For Big Projects, Easily Increase The Length Up To 100 In. By Adding The Bora Ngx 50-Inch Aluminum Extension.
Clamps Firmly: This Straight Edge Guide Has A Wide Rubberized Clamp Face To Ensure A Tight Non-Slip Grip That Won’T Leave Indentations And Is Easily Adjustable To Meet The Length Of Your Project.
Features
- Circular Saw Guide For Large Sheets: The Bora Clamp Edge is an ideal accessory for accurately cutting wide boards and pieces of plywood that are too big for a table saw
- Clamps Firmly: This straight edge guide has a wide rubberized clamp face to ensure a tight non-slip grip that won t leave indentations and is easily adjustable to meet the length of your project
- Extreme Durability: Made of heavy-gauge, extruded aluminum, it is rigid enough to resist bowing and hold a straight edge, and durable enough to withstand repeated use
- Use With Any Circular Saw: This guide is compatible with any brand of circular saw, not just Bora Tools. Use it with circular saws, routers, and jigsaws. For big projects, easily increase the length up to 100 in. by adding the Bora NGX 50-inch aluminum extension
- See more on Amazon...
Brand: Bora | Manufacturer: Bora
Dimensions: 2.00 x 58.00 x 3.00 inches | Weight: 2.00 Pounds
Warranty: 1 year
See On Amazon #4
Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop
Asin: B087XWCV61 | Model: 11567 | PartNumber: 11567 | Ean: 0817918022532 | UPC: 817918022532
The Head Is Mounted To A Solid Steel Miter Bar That Measure 18” In Length And Is .354” Thick By .730” Wide. Standard Miter Slots Are 3/4” X 3/8” With A 1/8” “T” Slot (Slight Variances From Brand To Brand) Running The Length On The Bottom Of The Slot. The Steel Miter Bar Is Equipped With A Metal, Removable Retaining Disc That Measures 7/8” In Diameter And Is Just Shy Of 1/8” To Fit Into To The “T” Slot To Prevent Accidental Lifting When Feeding Your Stock Through..
Both Ends Of The Fence Are Cut At Exactly 45 Degrees. This Allows You To Position The Fence Extra Close To The Saw Blade (With The Power Turned Off) So You Have Even More Control Over The Workpiece You Are Cutting. The Fence Comes With A Flip Stop That Makes Repetitive Cuts A Breeze. When Not In Use The Flip Stop Can Be Flipped Up And Out Of The Way. Also Include Are Two Sticky Back Measuring Tapes. 1 Tape Is Left To Right Reading And The Other Is Right To Left Reading..
Made From A Single Piece Of Extruded Aluminum, This Precision Miter Gauge Fence Is Not Only Durable, Its Accurate And Saves Setup Time. The Fence Is Designed To Be Used With Most Any Miter Gauge With Its Off-Set Mounting Track On The Back Of The Fence. The Off-Set Track Allows You To Flip The Fence For Lower Profile Miter Gauge Mounts And Flip Back For Standard Height Miter Gauges. The Fence Can Be Mounted To Older Miter Gauges By Adding A Wooden Block Mount With Wooden Screws If Necessary..
The .200” Thick, Adjustable, Solid Aluminum Head Is Machined With 13 Positive Stop Holes. 1 Hole Is At 90 Degrees While The 6 Holes On Both Sides Are At 22.5, 30, 45, 60, 67.5 And 90 Degrees. The Positive Stops Are Perfect For Many Woodworking Projects As They Are The Angles That Are Typically Used.To Adjust The Head You Simply Loosen The Post Knob Handle, Pull The Spring Loaded Indexing Pin Outward, Rotate The Head To The Desired Position, Release The Pin And Lock Into Place..
Features
- The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs.
- The .200 thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place.
- The head is mounted to a solid steel miter bar that measure 18 in length and is .354 thick by .730 wide. Standard miter slots are 3/4 x 3/8 with a 1/8 T slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a metal, removable retaining disc that measures 7/8 in diameter and is just shy of 1/8 to fit into to the T slot to prevent accidental lifting when feeding your stock through.
- Made from a single piece of extruded aluminum, this precision miter gauge fence is not only durable, its accurate and saves setup time. The fence is designed to be used with most any miter gauge with its off-set mounting track on the back of the fence. The off-set track allows you to flip the fence for lower profile miter gauge mounts and flip back for standard height miter gauges. The fence can be mounted to older miter gauges by adding a wooden block mount with wooden screws if necessary.
- Both ends of the fence are cut at exactly 45 degrees. This allows you to position the fence extra close to the saw blade (with the power turned off) so you have even more control over the workpiece you are cutting. The fence comes with a flip stop that makes repetitive cuts a breeze. When not in use the flip stop can be flipped up and out of the way. Also include are two sticky back measuring tapes. 1 tape is left to right reading and the other is right to left reading.
- See more on Amazon...
Brand: Fulton | Manufacturer: Fulton Woodworking Tools Inc.
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 2.50 Pounds
See On Amazon #5
WEN RT6033 15-Amp Variable Speed Plunge Woodworking Router Kit with Carrying Case & Edge Guide
Asin: B07WDR7N3R | Model: RT6033 | PartNumber: RT6033 | Ean: 0044459060345 | UPC: 044459060345
Accepts Both 1/4 And 1/2-Inch Router Bits With A Plunge Depth Of Up To 2-3/8 Inches.
7-Stop Turret Combined With Both Macro And Micro-Adjustment Dials Maximize Precision.
Plunging Base Locks In Downward Position For Functionality As Both A Plunge And A Fixed Router.
Features
- Powerful 15-amp variable speed soft start motor provides speeds from 8, 000 to 23, 000 RPM
- Plunging base locks in downward position for functionality as both a plunge and a fixed Router
- Accepts both 1/4 and 1/2-inch Router bits with a plunge depth of up to 2-3/8 inches
- 7-Stop turret combined with both macro and micro-adjustment dials maximize precision
- See more on Amazon...
Brand: WEN | Manufacturer: WEN
See On Amazon #6
POWERTEC BS900RF Rip Fence for POWERTEC BS900 Wood Band Saw and Similar Band Saws with a Work Table Size of 11-1/8 to 11-13/16
Asin: B004JHIXO0 | Model: BS900RFA | PartNumber: BS900RFA | Ean: 0736815230928 | UPC: 736815230928
By Using The Handy Adjustable Cam, The Clamp Can Adjust From 11-3/8-Inch Up To 12-Inch.
Simple, Effective Cam Lever Action Means Device Is Securely Locked In Place. Hassle Free To Store And Move About - Weighing In At 13.4 Ounces.
Arrives Fully Assembled, Right Out Of The Package.
Provides For Straight Parallel Cuts..
Features
- Sturdy Extruded aluminum construction means it's solid and durable
- Provides for straight parallel cuts.
- By using the handy adjustable cam, the clamp can adjust from 11-3/8-Inch up to 12-Inch
- Arrives fully assembled, right out of the package
- Simple, effective cam lever action means device is securely locked in place. Hassle free to store and move about - weighing in at 13.4 ounces
- See more on Amazon...
Brand: POWERTEC | Manufacturer: Southern Technology LLC
Dimensions: 2.10 x 12.20 x 4.20 inches | Weight: 0.64 pounds
See On Amazon #7
Kreg KMS7102 Table Saw Precision Miter Gauge System - Factory Calibrated - With Miter Gauge Fence & Bar - Miter Gauge for Table Saw
Asin: B0002QZ4RG | Model: KMS7102 | PartNumber: KMS7102
Ean: 0721019584007, 0772040301583, 0647096521127, 0745667216639, 5526680002288, 0732454078327, 0785497050966
UPC: 785497050966, 772040301583, 647096521127, 721019584007, 745667216639, 732454078327
Accurate Measuring Tool: Miter Saw Guide Has 5 Positive Stops; Vernier Scale Aids Adjustments To 1/10 Of A Degree.
Premium Kreg Tools: We Offer Products That Help Woodworkers Close The Gap Between Idea And Outcome.
Secure Workshop Accessories: Swing Stop Lets You Switch Boards Quickly Without Losing Measurements On Miter Gauge.
Versatile Woodworking Tool: Saw Accessory Has A Brass Pin That Lets You Make Quick Changes Between Stop Angles.
Features
- Premium Home Improvement Tools: This miter saw table gauge helps you make accurate and repeatable angled cuts
- Versatile Woodworking Tool: Saw accessory has a brass pin that lets you make quick changes between stop angles
- Accurate Measuring Tool: Miter saw guide has 5 positive stops; vernier scale aids adjustments to 1/10 of a degree
- Secure Workshop Accessories: Swing stop lets you switch boards quickly without losing measurements on miter gauge
- Premium Kreg Tools: We offer products that help woodworkers close the gap between idea and outcome
- See more on Amazon...
Brand: KREG | Manufacturer: Kreg Tool Inc
Dimensions: 6.25 x 25.25 x 2.63 Inches | Weight: 6.02 pounds
Warranty: LIMITED
See On Amazon #8
BOW Products 36 XT XTENDER Fence - T-Track Table Fence System with Multiple T-Slots for Woodworking Accessories - Fits Portable Table Saws, Cabinet Saws, and Band Saws - XT536 (Fence Only)
Asin: B0CJ9ZVWSV | Model: XT536 | PartNumber: XT536 | Ean: 0853223006546 | UPC: 853223006546
Fast Set Up: Xtender Fence Attaches And Detaches From Your Existing Fence In Seconds With T-Track Clamps (Required; Sold Separately. Part # Xt2). Bow Xt T-Track Clamps Are Designed To Fit Most Portable Saws, Bench Top Saws, Bandsaw, And Full Cabinet Saw Fences. Fast Set Up Ensures Convenience To Use Xtender When You Need It. Includes Special Slot For Delta Unifence And Harvey Fences For Quick Attach As Well. (See Kits Below).
Add Bow Safety Accessories: Take Full Advantage Of The Bow Xtender Fence System. Three T-Slots On The Face, Top And Back Of The Fence Enable Adding Woodworking Accessories Like Bow Fencepro Featherboards, Stops, Etc. T-Slots Run The Length Of The Fence And Accept 5/16” Or 1/4" T-Bolts. Check Out The Kit Options And Make Your Saw Safer With Better Control, Better Cuts And Added Stability When Cutting Longer Boards. View Our Available Bundles Below..
Multi-Position Fence Placement: Milled Clamp Slots Are Located On The Back Of The Xtender Fence And Offer Multiple Positioning Options In Relation To Your Saws Fence. Ideal When Using A Fence Longer Than Your Table Surface And Paired With Bow Feed Support Accessory (Part# Xt1). Position Xt Xtender Fence Forward For Greater Infeed Control; Position Back For Outfeed Control; Or Center Placement For Infeed And Outfeed Control. Slots Accept Bow Xt T-Track Clamps..
Extend Fence And Table Surface: Xt Xtender Fence Works In Tandem With Optional Xt Feed Support Accessory. Bow Feed Supports Attach To The Fence And Function As A Shelf Extending The Table Surface For Infeed And/Or Outfeed. Transform The Smaller Tabletops By Extending Feed Support And Control Over A Wider Area. The 36” Xtender Fence Is Perfect For Extending Small Portable Jobsite Saws, Benchtop Saws Or Bandsaws. Improves Safety As Wood Is Easier To Control And Kept Square To The Blade..
Features
- Most Versatile Add-On Fence: XT XTENDER 36 Fence stands 5 tall, includes three T-slots along the top for feed control accessories, milled clamp attach slots for multi-position set up, special slot to add BOW Feed Supports accessory, and a slot for attaching to Delta UniFence and Harvey fences. Robust Aluminum extrusion with anodized finish and 3 sizes for all your needs. Use with XT Feed Supports to extend smaller tabletops and improve stability, cut quality, feed control and safety.
- Extend Fence and Table Surface: XT XTENDER Fence works in tandem with optional XT Feed Support Accessory. Bow Feed Supports attach to the Fence and function as a shelf extending the table surface for infeed and/or outfeed. Transform the smaller tabletops by extending feed support and control over a wider area. The 36 XTENDER Fence is perfect for extending small Portable jobsite saws, benchtop saws or bandsaws. Improves safety as wood is easier to control and kept square to the blade.
- Fast Set Up: XTENDER Fence attaches and detaches from your existing fence in seconds with T-Track Clamps (Required; Sold Separately. Part # XT2). Bow XT T-Track clamps are designed to fit most portable saws, bench top saws, bandsaw, and full cabinet saw fences. Fast Set up ensures convenience to use XTENDER when you need it. Includes special Slot for Delta UniFence and Harvey Fences for quick attach as well. (See kits below)
- Multi-Position Fence Placement: Milled Clamp Slots are located on the back of the XTENDER Fence and offer multiple positioning options in relation to your Saws fence. Ideal when using a fence longer than your table surface and paired with Bow Feed Support accessory (Part# XT1). Position XT XTENDER Fence forward for greater infeed control; position back for outfeed control; or center placement for infeed and outfeed control. Slots accept Bow XT T-Track Clamps.
- Add Bow Safety Accessories: Take full advantage of the Bow XTENDER Fence System. Three T-Slots on the face, Top and Back of the fence enable adding woodworking accessories like Bow FencePRO Featherboards, stops, etc. T-slots run the length of the fence and accept 5/16 or 1/4 T-bolts. Check out the kit options and make your saw safer with better control, better cuts and added stability when cutting longer boards. View our available bundles below.
- See more on Amazon...
Brand: BOW Products | Manufacturer: BOW Products
Dimensions: 5.00 x 36.00 x 1.00 Inches | Weight: 6.83 pounds
See On Amazon #9
Kreg KMS7200 Precision Band Saw Fence - Workbench Accessory - Workbench Rail - Fits Most Band Saws
Asin: B0007VYL48 | Model: KMS7200 | PartNumber: KMS7200 | Ean: 0787721586876, 0647096524159, 0784497257375 | UPC: 647096524159, 787721586876, 784497257375
Precise Woodworking Tools: This Table Saw Fence Uses A Precision Lens Cursor For Accurate Measurements.
Premium Kreg Tools: We Offer Products That Help Woodworkers Close The Gap Between Idea And Outcome.
Home Improvement Tools: Adjustable, Low-Profile Saw Fence Also Has T-Slots For Adding Stops And Re-Saw Guides.
Accurate Workshop Accessories: This Fence System Adjusts To Your 14-Inch Band Saw Blade's Drift Angle.
Features
- Premium Saw Accessory: Saw fence adjusts for perpendicularity with band saws, making them a precise cutting tool
- Accurate Workshop Accessories: This fence system adjusts to your 14-inch band saw blade's drift angle
- Precise Woodworking Tools: This table saw fence uses a precision lens cursor for accurate measurements
- Home Improvement Tools: Adjustable, low-profile saw fence also has T-slots for adding stops and re-saw guides
- Premium Kreg Tools: We offer products that help woodworkers close the gap between idea and outcome
- See more on Amazon...
Brand: KREG | Manufacturer: Kreg Tool Inc
Dimensions: 8.00 x 2.50 x 32.25 inches | Weight: 4.80 Pounds
Warranty: limited
See On Amazon #10
POWERTEC 24 Inch Circular Saw Guide/Straight Edge Guide for Router Tool, Jigsaw, Circular Saw and Drill Press, Saw Guide for Cutting Plywood and Routing Dado Slots for Woodworking, 1 pack (71705)
Asin: B0CJ2LZF3F | Model: 71705 | PartNumber: 71705 | Ean: 0843441122067 | UPC: 843441122067
Easy To Use: Perfect For Beginners As Well As Professional Contractors, The Straight Edge Clamps Hold The Materials And Are Easy To Adjust. The Fixed Clamp At The End Has A Lever That You Push Down To Lock It In Place. With The Locking Lever Released And The Fixed Clamp In Position, Draw The Adjustable End Clamp In And Position Firmly Against The Opposite End Of The Material.
Premium Build: Constructed With A Lightweight Aluminum Body And Is 2-3/16 Inches Wide, Providing The Strength And Rigidity Needed To Prevent The Bar From Bending Under Pressure While Operating A Router Or Circular Saw, For Long-Term Durability.
Applications: Perfect Tools For Making Straight Cuts On The Materials. You Can Easily Make High-Precision Cuts For A Wide Range Of Woodworking Applications, Including Rotary Saws, Jig Saws, Circular Table Saws, Routers And Jointers.
Function: Space-Saving Tools That Allow You To Make Straight Cuts On Any Workpiece With Parallel Edges. This Clamps Allow For Full Adjustability To Accommodate Materials 24 Inches In Length. They Have Low-Profile Jaws That Enable The Clamps To Be Used Inverted, Which Provides An Unobstructed Work Area.
Features
- INCLUDES: (1) Straight Edge Clamp Saw Guides 24in
- FUNCTION: Space-saving tools that allow you to make straight cuts on any workpiece with parallel edges. This clamps allow for full adjustability to accommodate materials 24 inches in length. They have low-profile jaws that enable the clamps to be used inverted, which provides an unobstructed work area
- EASY TO USE: Perfect for beginners as well as professional contractors, the straight edge clamps hold the materials and are easy to adjust. The fixed clamp at the end has a lever that you push down to lock it in place. With the locking lever released and the fixed clamp in position, draw the adjustable end clamp in and position firmly against the opposite end of the material
- APPLICATIONS: Perfect tools for making straight cuts on the materials. You can easily make high-precision cuts for a wide range of woodworking applications, including rotary saws, jig saws, circular table saws, routers and jointers
- PREMIUM BUILD: Constructed with a lightweight aluminum body and is 2-3/16 inches wide, providing the strength and rigidity needed to prevent the bar from bending under pressure while operating a router or circular saw, for long-term durability
- See more on Amazon...
Brand: POWERTEC | Manufacturer: POWERTEC
Dimensions: 1.77 x 37.20 x 3.34 inches
See On Amazon #11
POWERTEC 71135 2-1/4-Inch Fence Flip Stop for Woodworking
Asin: B07M5YZ81H | Model: 71135 | PartNumber: 71135 | Ean: 0843441101635 | UPC: 843441101635
Features: A User-Friendly Design With An Arm That Conveniently Flips Down When Needed And Stays Concealed When Not In Use, Plus It Slides Up And Down Any Fence With A Top-Mounted T-Track And Comfortably Locks Down With A 1" Dia Knob. The Stop Can Be Converted From The Inboard To The Out Board Position And The Flip Arm Can Be Set For The Right Or Left Side Of The Body..
Build: Possesses A High Quality Die Cast Aluminum Construction And Finished With A Smooth Blue Anodized Coating For Wear Resistance And Long Term Use.
Universal: Works On Single, Double And Multi-Track Assemblies - Perfect For An Assortment Of Woodworking And Router Table Projects, Such As Making Odd Cuts Or For Updating Your Cross Cut Sleds, And Other Task (Without The Need For Changing Settings).
Function: Creates Optimized Fence-Top Setups In Your Universal T-Track Assemblies, Allowing You To Set Them To Your Desired Measurement Requirements And Make Repetitive Cuts And Drills Without Remeasuring.
Features
- INCLUDES: (1) T-Track Flip Fence Stop (2-1/4 inches) with 5/16" T-Bolt
- FUNCTION: Creates optimized fence-top setups in your universal t-track assemblies, allowing you to set them to your desired measurement requirements and make repetitive cuts and drills without remeasuring
- FEATURES: A user-friendly design with an arm that conveniently flips down when needed and stays concealed when not in use, plus it slides up and down any fence with a top-mounted t-track and comfortably locks down with a 1 dia knob. The stop can be converted from the inboard to the out board position and the flip arm can be set for the right or left side of the body.
- UNIVERSAL: Works on single, double and multi-track assemblies - perfect for an assortment of woodworking and router table projects, such as making odd cuts or for updating your cross cut sleds, and other task (without the need for changing settings)
- BUILD: Possesses a high quality die cast aluminum construction and finished with a smooth blue anodized coating for wear resistance and long term use
- See more on Amazon...
Brand: POWERTEC | Manufacturer: POWERTEC
Dimensions: 1.50 x 6.50 x 4.50 inches | Weight: 0.35 Pounds
See On Amazon #12
O'SKOOL 24 inch Straight Edge Guide Clamp with Band Saw Fence
Asin: B0C7V44NY7 | Model: PTA18 | PartNumber: PTA18 | Ean: 4711198630899
Versatility: Band Saw Fences Are Often Adjustable, Allowing You To Position Them At Different Distances From The Blade. This Adjustability Offers Versatility In Cutting Various Sizes Of Workpieces. Whether You Need To Cut Thin Veneers Or Thick Stock, A Band Saw Fence Can Accommodate Different Dimensions, Providing Support And Control Regardless Of The Material's Thickness..
Feature: The Progrip Straight Edge Guide Clamp Allows For Slight Angle Adjustments During Clamping. This Feature Is Useful When Your Saw Blade Has A Slight Drift, As It Enables You To Keep Your Fence Parallel To The Saw Blade..
Secure And Stable: Combining A Band Saw Fence And The Pro Grip Straight Edge Guide Clamp Ensures A Safe And Stable Cutting Environment. The Fence Provides A Secure Guide, Preventing Material Shifts And Accidental Slips While Keeping Hands Away From The Blade. The Progrip Clamp Offers Reliable Stability, Securely Gripping The Workpiece To Minimize Movement And Potential Inaccuracies..
Easy And Quick Setup: Setting Up The Progrip Straight Edge Guide Clamp Is Quick And Straightforward. The Clamp Typically Features A Quick-Release Mechanism That Allows For Easy Attachment And Removal From The Workpiece. The Straight-Edge Guide Is Usually Marked With Measurements Or Ruler Guides, Enabling Precise Positioning And Measurements. This Ease Of Setup Saves Time And Effort, Allowing You To Focus On The Task At Hand..
Features
- Accuracy and Precision: A band saw fence allows you to make accurate and precise cuts consistently. The fence serves as a guide for your workpiece, ensuring that it remains parallel to the cutting path throughout the cutting process. This results in straight, uniform cuts, allowing you to achieve the desired dimensions and angles with greater ease.
- Easy and Quick Setup: Setting up the PROGRIP Straight Edge Guide Clamp is quick and straightforward. The clamp typically features a quick-release mechanism that allows for easy attachment and removal from the workpiece. The straight-edge guide is usually marked with measurements or ruler guides, enabling precise positioning and measurements. This ease of setup saves time and effort, allowing you to focus on the task at hand.
- Versatility: Band saw fences are often adjustable, allowing you to position them at different distances from the blade. This adjustability offers versatility in cutting various sizes of workpieces. Whether you need to cut thin veneers or thick stock, a band saw fence can accommodate different dimensions, providing support and control regardless of the material's thickness.
- Secure and Stable: Combining a band saw fence and the PRO GRIP Straight Edge Guide Clamp ensures a safe and stable cutting environment. The fence provides a secure guide, preventing material shifts and accidental slips while keeping hands away from the blade. The PROGRIP Clamp offers reliable stability, securely gripping the workpiece to minimize movement and potential inaccuracies.
- Feature: The PROGRIP Straight Edge Guide Clamp allows for slight angle adjustments during clamping. This feature is useful when your saw blade has a slight drift, as it enables you to keep your fence parallel to the saw blade.
- See more on Amazon...
Brand: O'SKOOL | Manufacturer: O'skool
See On Amazon #13
Milescraft 7209 Universal Fence Clamp 4-Pack - For Mitre Saws, Router Tables, Table Saws- Clamping Squares - 3/8" Rod - Rigid Aluminum Body - Woodworking Clamps
Asin: B09Q4LP3FC | Model: 7209 | PartNumber: 7209 | Ean: 0737888720903 | UPC: 737888720903
Non-Marring Clamp Pad Protects Work.
Allow You To Secure A Wide Variety Of Shop-Made Auxiliary Fences To Your Existing Fences Without The Clamp Getting In The Way..
Use With 90° Clamping Squares For Easy Corners.
Range Of Travel 1/2″-5-3/4″ (12Mm To 146Mm).
Features
- Fits 3/8" Holes in Auxiliary Fences
- Range of travel 1/2 -5-3/4 (12mm to 146mm)
- Non-Marring Clamp Pad Protects work
- Use with 90 clamping squares for easy corners
- Allow you to secure a wide variety of shop-made auxiliary fences to your existing fences without the Clamp getting in the way.
- See more on Amazon...
Brand: Milescraft | Manufacturer: Milescraft
Warranty: 3 year
See On Amazon #14
POWERTEC 71004V Universal Fence Clamp, 2 PK, For Table Saws, Router Tables, Clamping Squares, Drill Press Tables, Mitre Saws, With 3/8" Rod
Asin: B0BH3THVWN | Model: 71004V | PartNumber: 71004V | Ean: 0843441114734 | UPC: 843441114734
Versatile: Clamps Can Be Used Individually As Stop Blocks Or Used In Pairs As Sacrificial Fences, Half-Fences And Resaw Fences – Perfect For Framing, Furniture Assembly, Cabinetry And Woodworking Applications.
Premium Build: Compact And Lightweight, They Possess Ergonomic Clamp Knobs, And A Rugged Body Made Out Of High Quality Aluminum For Long Lasting Durability.
Function: Allow You To Quickly Secure A Wide Variety Of Auxiliary Fences To Your Existing Table Saw, Band Saw, And Router Table Fences Without Interfering Or Being In The Way Of Additional Stock, The Blade Or Your Hands.
Compatibility: Designed To Fit A Multitude Of Fences, Ranging From 3/4” To 5-3/4” Thick. Fits Into A Standard 3/8” Hole Drilled In The Top Of The Auxiliary Or Sacrificial Fence..
Features
- INCLUDES: (2) Universal Fence Clamps
- COMPATIBILITY: Designed to fit a multitude of fences, ranging from 3/4 to 5-3/4 thick. Fits into a standard 3/8 hole drilled in the top of the auxiliary or sacrificial fence.
- VERSATILE: Clamps can be used individually as stop blocks or used in pairs as sacrificial fences, half-fences and resaw fences perfect for framing, furniture assembly, cabinetry and woodworking applications
- FUNCTION: Allow you to quickly secure a wide variety of auxiliary fences to your existing table saw, band saw, and router table fences without interfering or being in the way of additional stock, the blade or your hands
- PREMIUM BUILD: Compact and lightweight, they possess ergonomic clamp knobs, and a rugged body made out of high quality aluminum for long lasting durability
- See more on Amazon...
Brand: POWERTEC | Manufacturer: POWERTEC
See On Amazon #15
POWERTEC 36 Inch Circular Saw Guide/Straight Edge Guide for Router Tool, Jigsaw, Circular Saw and Drill Press, Saw Guide for Cutting Plywood and Routing Dado Slots for Woodworking, 1 pack (71706)
Asin: B0CJ2KFKGL | Model: 71706 | PartNumber: 71706 | Ean: 0843441122074 | UPC: 843441122074
Easy To Use: Perfect For Beginners As Well As Professional Contractors, The Straight Edge Clamps Hold The Materials And Are Easy To Adjust. The Fixed Clamp At The End Has A Lever That You Push Down To Lock It In Place. With The Locking Lever Released And The Fixed Clamp In Position, Draw The Adjustable End Clamp In And Position Firmly Against The Opposite End Of The Material.
Premium Build: Constructed With A Lightweight Aluminum Body And Is 2-3/16 Inches Wide, Providing The Strength And Rigidity Needed To Prevent The Bar From Bending Under Pressure While Operating A Router Or Circular Saw, For Long-Term Durability.
Applications: Perfect Tools For Making Straight Cuts On The Materials. You Can Easily Make High-Precision Cuts For A Wide Range Of Woodworking Applications, Including Rotary Saws, Jig Saws, Circular Table Saws, Routers And Jointers.
Function: Space-Saving Tools That Allow You To Make Straight Cuts On Any Workpiece With Parallel Edges. This Clamp Allow For Full Adjustability To Accommodate Materials 36 Inches In Length. They Have Low-Profile Jaws That Enable The Clamps To Be Used Inverted, Which Provides An Unobstructed Work Area.
Features
- INCLUDES: (1) Straight Edge Clamp Saw Guides 36in
- FUNCTION: Space-saving tools that allow you to make straight cuts on any workpiece with parallel edges. This clamp allow for full adjustability to accommodate materials 36 inches in length. They have low-profile jaws that enable the clamps to be used inverted, which provides an unobstructed work area
- EASY TO USE: Perfect for beginners as well as professional contractors, the straight edge clamps hold the materials and are easy to adjust. The fixed clamp at the end has a lever that you push down to lock it in place. With the locking lever released and the fixed clamp in position, draw the adjustable end clamp in and position firmly against the opposite end of the material
- APPLICATIONS: Perfect tools for making straight cuts on the materials. You can easily make high-precision cuts for a wide range of woodworking applications, including rotary saws, jig saws, circular table saws, routers and jointers
- PREMIUM BUILD: Constructed with a lightweight aluminum body and is 2-3/16 inches wide, providing the strength and rigidity needed to prevent the bar from bending under pressure while operating a router or circular saw, for long-term durability
- See more on Amazon...
Brand: POWERTEC | Manufacturer: POWERTEC
Dimensions: 1.77 x 49.00 x 3.34 inches
See On Amazon #16
BESSEY KRE3531, 31 In., Parallel Clamp, K Body REVO Series - 1700 lbs Nominal Clamping Force , Spreader, and Woodworking Accessories - Clamps and Tools for Woodworking, Cabinetry, Case Work
Asin: B07BTLJCVK | Model: KRE3531 | PartNumber: KRE3531 | Ean: 0788502203753 | UPC: 788502203753
Strong, Precise & Gentle – Capable Of High Strength With Nominal 90 Degree Clamping. Non-Marring Pads And Rail Protection Pieces Serve To Protect The Workpiece From Unnecessary Marks..
Large Clamping Surfaces - Clamping Surfaces Are Oversized And Distribute Clamping Force Evenly. Three Removable Pressure Caps Are Repellent To Glue, And Resistant To Paint And Grease Solvents..
Cold Drawn Steel Rail Bar - Produced And Tested With Consistently High Quality And The Utmost Precision In Cutting-Edge Facilities..
Simple Set Up With Powerful Operation - Secure Nominal Clamping Force Up To 1700 Lbs. Operating Jaw Stays Where You Put It For Easy Set Up. Position Where You Like And Apply Clamping Force..
Features
- Well Thought Out - Ergonomically formed 2-component handle with steel socket for applying force with a hex key or driver when desired (max. torque 17 Nm).
- Simple Set Up with Powerful Operation - Secure nominal clamping force up to 1700 lbs. Operating jaw stays where you put it for easy set up. Position where you like and apply clamping force.
- Strong, Precise & Gentle Capable of high strength with nominal 90 degree clamping. Non-marring pads and rail protection pieces serve to protect the workpiece from unnecessary marks.
- Cold Drawn Steel Rail Bar - Produced and tested with consistently high quality and the utmost precision in cutting-edge facilities.
- Large Clamping Surfaces - Clamping surfaces are oversized and distribute clamping force evenly. Three removable pressure caps are repellent to glue, and resistant to paint and grease solvents.
- See more on Amazon...
Brand: Bessey | Manufacturer: Bessey
Dimensions: 2.00 x 38.75 x 5.75 inches
Warranty: Lifetime against manufacturing defects
See On Amazon #17
WEN Steel and Brass Premium Miter Gauge, 27 Angle Stops for Table Saws, Router Tables, Band Saws, and Woodworking Tools (WA1401)
Asin: B0CYCQ6SBY | Model: WA1401 | PartNumber: WA1401 | Ean: 0044459614029 | UPC: 044459614029
Precision-Cut Miter Plate Features 27 Positive Stops.
Includes Miter Bar Expansion Discs To Help Eliminate Wobble And Play, Industrial-Grade Brass Lock Knobs, Laser-Etched Wear-Resistant Scale Markings, And A Two-Year Warranty.
Universal Design Compatible With Industry-Standard 3/4-Inch By 3/8-Inch Miter Slots, Including Wen Models Ba1411 Band Saw And The Tt0811 And Tt1015 Table Saws.
Heavy-Duty Steel And Brass Construction Maximizes Durability And Wear Resistance.
Features
- Perfect for table saws, router tables, band saws, benchtop sanders, and other woodworking tools
- Heavy-duty steel and brass construction maximizes durability and wear resistance
- Precision-cut miter plate features 27 positive stops
- Universal design compatible with industry-standard 3/4-inch by 3/8-inch miter slots, including WEN models BA1411 Band Saw and the TT0811 and TT1015 Table Saws
- Includes miter bar expansion discs to help eliminate wobble and play, industrial-grade brass lock knobs, laser-etched wear-resistant scale markings, and a two-year warranty
- See more on Amazon...
Brand: WEN | Manufacturer: WEN
See On Amazon #18
Woodpeckers Precision Woodworking Tools SG-WP Saw Gauge and Alignment Tool
Asin: B002VRFM9Y | Model: SG-WP | PartNumber: SG-WP | Ean: 0844788006805, 6132619051167, 0705105657202, 0785497968278 | UPC: 705105657202, 785497968278, 844788006805
Includes New Lockable, Plastic Case.
Made In Usa.
Dial Indicator Has 1-Ich Of Travel As Well As A Rotation Counter, One Thousandth Of An Inch Graduations, And Adjustable Scale And Bezel.
Automatically Adjusts To The Width Of The Miter Slot.
Features
- Perfect for both rip fence and saw blade alignments
- Automatically adjusts to the width of the miter slot
- Includes new lockable, plastic case
- Dial indicator has 1-ich of travel as well as a rotation counter, one thousandth of an inch graduations, and adjustable scale and bezel
- Made in USA
- See more on Amazon...
Brand: Woodpeckers | Manufacturer: Woodpeckers Inc.
Dimensions: 3.50 x 10.00 x 8.50 inches | Weight: 2.20 Pounds
See On Amazon #19
Woodpeckers Spline Jig, Router Table & Table Saw Jig for Dovetails & Miter Joints, Makes Joinery Strong & Attractive, Made in USA
Asin: B0C7LDYL2W | Model: SPLINE-23 | PartNumber: SPLINE-23 | Ean: 0810018209780 | UPC: 810018209780
Versatile Project Capacity - The Woodpeckers Spline Jig Can Handle Narrow Projects From 1/2" To 16" Wide On The Wider Setting. When Projects Exceed 16", Just Move The Tracks Inward To Tackle Long Projects Up To 3 Feet Wide..
Made In Usa - Like All Woodpeckers Products, The Spline Jig Is Precisely Machined And Carefully Inspected In Our Strongsville, Ohio, Facility Just South Of Cleveland..
Table Saw & Router Table Jig - For Narrow Splines, This Jig Works Great On The Table Saw. For Wider Splines Or Dovetail Work, The Jig Works Great With The Router Table Too..
Stengthen Your Miter Joints - You Can Make A Joint Rock Solid And Add A Design Element At The Same Time By Adding Spline Across The Miters With The Spline Jig..
Features
- PRECISION BUILT - The Woodpeckers Spline Jig has 2 sections of aluminum Super Track, secured by UHMW glide strip lined, powder-coated steel legs. Also inlcuded are 4 molded flip stops to keep your splines aligned.
- STENGTHEN YOUR MITER JOINTS - You can make a joint rock solid and add a design element at the same time by adding spline across the miters with the Spline Jig.
- VERSATILE PROJECT CAPACITY - The Woodpeckers Spline Jig can handle narrow projects from 1/2 to 16 wide on the wider setting. When projects exceed 16, just move the tracks inward to tackle long projects up to 3 feet wide.
- TABLE SAW & ROUTER TABLE JIG - For narrow splines, this jig works great on the table saw. For wider splines or dovetail work, the jig works great with the router table too.
- MADE IN USA - Like all Woodpeckers products, the Spline Jig is precisely machined and carefully inspected in our Strongsville, Ohio, facility just south of Cleveland.
- See more on Amazon...
Brand: Woodpeckers | Manufacturer: Woodpeckers
See On Amazon #20
POWERTEC 71135-P2 2-1/4-Inch Fence Flip Stop for Woodworking, 2PK
Asin: B099JZBG7Q | Model: 71135-P2 | PartNumber: 71135-P2 | Ean: 0843441111375 | UPC: 843441111375
Features: A User-Friendly Design With An Arm That Conveniently Flips Down When Needed And Stays Concealed When Not In Use, Plus It Slides Up And Down Any Fence With A Top-Mounted T-Track And Comfortably Locks Down With A 1" Dia Knob. The Stop Can Be Converted From The Inboard To The Out Board Position And The Flip Arm Can Be Set For The Right Or Left Side Of The Body..
Build: Possesses A High Quality Die Cast Aluminum Construction And Finished With A Smooth Blue Anodized Coating For Wear Resistance And Long Term Use.
Note: This Item Is Designed To Work With Universal Or Double Cut T-Track, Which Has A 23/64” Wide Top Slot. It Will Not Fit Mini Or ¼” T-Track Which Has A Top Slot ¼” Wide. Please Verify The Size Of Your T-Track Before Ordering..
Universal: Works On Single, Double And Multi-Track Assemblies - Perfect For An Assortment Of Woodworking And Router Table Projects, Such As Making Odd Cuts Or For Updating Your Cross Cut Sleds, And Other Task (Without The Need For Changing Settings).
Function: Creates Optimized Fence-Top Setups In Your Universal T-Track Assemblies, Allowing You To Set Them To Your Desired Measurement Requirements And Make Repetitive Cuts And Drills Without Remeasuring.
Features
- INCLUDES: (1) T-Track Flip Fence Stop (2-1/4 inches) with 5/16" T-Bolt
- FUNCTION: Creates optimized fence-top setups in your universal t-track assemblies, allowing you to set them to your desired measurement requirements and make repetitive cuts and drills without remeasuring
- FEATURES: A user-friendly design with an arm that conveniently flips down when needed and stays concealed when not in use, plus it slides up and down any fence with a top-mounted t-track and comfortably locks down with a 1 dia knob. The stop can be converted from the inboard to the out board position and the flip arm can be set for the right or left side of the body.
- UNIVERSAL: Works on single, double and multi-track assemblies - perfect for an assortment of woodworking and router table projects, such as making odd cuts or for updating your cross cut sleds, and other task (without the need for changing settings)
- BUILD: Possesses a high quality die cast aluminum construction and finished with a smooth blue anodized coating for wear resistance and long term use
- Note: This item is designed to work with Universal or Double Cut T-Track, which has a 23/64 wide top slot. It will not fit Mini or T-Track which has a top slot wide. Please verify the size of your T-Track before ordering.
- See more on Amazon...
Brand: POWERTEC | Manufacturer: POWERTEC
Dimensions: 4.50 x 6.50 x 4.50 inches
See On Amazon
Looking For Something Else?
Search