[THETA NanoHex]Hex Filament Dryer Type I Auto Filament Dehydrator with QUEIT FAN. FilaDryer for ALL filament 1.75 2.85 3.00mm PLA PETG ABS NYLON TPU PC.Storage and drying 2 in 1 (Filament Dryer Only)
Asin: B0BKGRR9D3 | Model: HexSAT12 | PartNumber: HexSAT12
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.{ Smart Engineering & Energy Efficient } -> Utilizes Advanced Ai Technology For Exceptional Results Maintaining Low Humidity With 𝗹𝗼𝘄 𝘁𝗲𝗺𝗽𝗲𝗿𝗮𝘁𝘂𝗿𝗲 𝗳𝗼𝗿 𝘀𝗮𝗳𝗲𝘁𝘆 𝗮𝗻𝗱 𝗺𝗶𝗻𝗶𝗺𝗶𝘇𝗲 𝗽𝗼𝘄𝗲𝗿 𝗰𝗼𝗻𝘀𝘂𝗺𝗽𝘁𝗶𝗼𝗻..
{ Unbeatable Results} -> Get The Best Prints Every Time. Avoid Time-Consuming Post-Processing Treatments With The Hex° 3D Filament Dehydrator Box. For Old Filament Please Allow Minimum 3 Hours Of Drying When Hex Is First Turned On..
{Sustainalbe And User-Friendly} -> Simple And Effective Design, 𝗥𝗢𝗛𝗦-𝗖𝗼𝗺𝗽𝗹𝗶𝗮𝗻𝘁, And Fully Recyclable Construction..
{ Made For All Filament Type} -> Compatible With 1.75Mm, 2.85Mm, And 3.00Mm Filaments. Works With Diverse Material Such As Pla, Abs, Petg, Tpu, Nylon, Peek, Hips, And More. You Name It..
{ Hot-Air Blow-Drying } -> Dehumidifies The Chamber In Just 𝟭𝟬 𝗺𝗶𝗻𝘂𝘁𝗲𝘀 While The Hot Air Dryes The Filament Dynamically..
{ Supreme Print Quality & Rejuvenate Old Filament} -> Maximize Moisture Diffusion With Our 𝗮𝗱𝘃𝗮𝗻𝗰𝗲𝗱 𝟯𝟲𝟬° 𝗵𝗲𝗮𝘁 𝘁𝗿𝗮𝗻𝘀𝗳𝗲𝗿. A Powerful Fan To Extract Moisture. 𝗘𝗹𝗶𝗺𝗶𝗻𝗮𝘁𝗲 𝗶𝘀𝘀𝘂𝗲𝘀 Like String And Clogging For Exceptional 3D Printing Quality. 𝗢𝗽𝘁𝗶𝗺𝗶𝘇𝗲 𝗽𝗿𝗶𝗻𝘁𝗶𝗻𝗴 With Priming Filament Temperature..
Features
- { Just turn it on } -> - for easy use. Choose for energy-efficient humidity control and for optimal drying in full power.
- { Supreme print quality & rejuvenate old filament} -> Maximize moisture diffusion with our . A powerful fan to extract moisture. like string and clogging for exceptional 3D printing quality. with priming filament temperature.
- { Smart engineering & Energy Efficient } -> Utilizes advanced AI technology for exceptional results maintaining low humidity with .
- { Hot-air blow-drying } -> Dehumidifies the chamber in just while the hot air dryes the filament dynamically.
- {Sustainalbe and user-friendly} -> Simple and effective design, - , and fully recyclable construction.
- { Made for all filament type} -> compatible with 1.75mm, 2.85mm, and 3.00mm filaments. Works with diverse material such as PLA, ABS, PETG, TPU, Nylon, PEEK, HIPS, and more. You name it.
- { Unbeatable Results} -> Get the best prints every time. Avoid time-consuming post-processing treatments with the Hex 3D filament Dehydrator box. For old filament please allow minimum 3 hours of drying when hex is first turned on.
- See more on Amazon...
Brand: THETA° | Manufacturer: THETA°
Dimensions: 11.00 x 11.00 x 4.00 inches | Weight: 2.50 Pounds
Warranty: 1 year manufacturer
See On Amazon Similar To THETA NanoHexHex Filament Dryer Type
#1
Comgrow 3D Printer Filament Dryer Box, Comgrow 3D Filament Storages, Keeping Filaments Dry During 3D Printing, Compatible with 1.75mm/2.85mm PLA PETG ABS Material, Filament Dehydrator, Spool Holder
Asin: B098D366R3 | Model: AK36WG-1200400J | PartNumber: AK36WG-1200400J
Filament Dryer And Remove Moisture - Comgrow 3D Printer Filament Dryer Box Is Designed To Keep Filament Dry And Remove Moisture From Kinds Of Filaments. Internal Heating During Printing Provides A Dry Storage Environment For 3D Printer Filaments And Keeps The Filament Dry. Avoid Entanglement, Clogging, Poor Adhesion, And Layer Migration Caused By The Dampness Of The Printing Wire. (Note: Only Used For The Drying Of 3D Printer Filament).
Great Sealed Filament Dry Box -The Outlet Structure Adopts A Silicone Cable Sheath And Teflon Tube, The Outlet Is Smooth And Can Be Covered With A Plug When Not In Use. The Upper Cover Has A Snap Button Structure, And The Sealing Performance Is Good..
How To Set The Filament - Place The Filament Into The Filament Outlet. Please Note That The Direction Is Placed Counterclockwise So That The Pulley At The Bottom Can Feed Better..
Real-Time Monitoring Of Temperature And Humidity - Adjustable Temperature Range 40°~ 50 °C, Setting Time From 6 Hours To 12 Hours. A 2-Inch Lcd Screen And Touch Buttons Make It Easy To Operate, It Is More Comprehensive And Clear Of The Information Display. Press The Power Button To Start, And Hold The Function Button(M) To Change The Dry Time And The Temperature Setting..
Setting Notes - Set The Temperature And Duration After Turning On The Filament Dehydrator. The Machine Will Work Only When The Work State Is Displayed On The Screen. If The Work Mode Is Not Displayed, The Motherboard Will Automatically Shut Down After 3 Minutes. If You Have Any Unsolvable Problems With The Comgrow Filament Dryer Box, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
Features
- Large Storage Volume -Filament Dry Box Inner Size: 9.29*6.49*9.13 inch. Comgrow dryer box can store 2 rolls of 1kg spools, compatible with PLA PETG ABS SILK filament. Works perfectly with all standard filament diameters 1.75mm/2.85mm.
- Setting Notes - Set the temperature and duration after turning on the filament dehydrator. The machine will work only when the work state is displayed on the screen. If the work mode is not displayed, the motherboard will automatically shut down after 3 minutes. If you have any unsolvable problems with the COMGROW filament dryer box, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- Filament Dryer and Remove Moisture - Comgrow 3d printer filament dryer box is designed to keep filament dry and remove moisture from kinds of filaments. Internal heating during printing provides a dry storage environment for 3D printer filaments and keeps the filament dry. Avoid entanglement, clogging, poor adhesion, and layer migration caused by the dampness of the printing wire. (Note: Only used for the drying of 3D printer Filament)
- Real-time Monitoring of Temperature and Humidity - Adjustable temperature range 40 ~ 50 C, setting time from 6 hours to 12 hours. A 2-inch LCD screen and touch buttons make it easy to operate, it is more comprehensive and clear of the information display. Press the power button to start, and hold the function button(M) to change the dry time and the temperature setting.
- Great Sealed Filament Dry Box -The outlet structure adopts a silicone cable sheath and Teflon tube, the outlet is smooth and can be covered with a plug when not in use. The upper cover has a snap button structure, and the sealing performance is good.
- How to set the filament - Place the filament into the filament outlet. Please note that the direction is placed counterclockwise so that the pulley at the bottom can feed better.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 9.00 x 9.20 x 6.40 inches | Weight: 3.31 pounds
See On Amazon #2
SUNLU Official Filament Dryer S4, 4 Spools Capacity, 350W PTC Heater, Power Saving Storage Mode, 70 Max Temperature, 3 Circulation Fans, Nylon TPU PLA PETG ABS 3D Printer Filament Dryer Box, Black
Asin: B0CQJMV71Z | Model: SUNLU Filament Dryer S4 | PartNumber: SUNLU Filament Dryer S4
8 Filament Exit Holes: Sunlu Filament Dryer S4 Features Eight Filament Outlets, Ideal For Multiple Printers And Various Filament Loading Angles, Smoother Loading And Printing..
Sunlu Main Products: Sunlu Provides A Diverse Selection Of Premium 3D Printing Solutions, Including 3D Printer Filament, Filament Dryers, Fdm 3D Printers, 3D Printer Resin, Lcd 3D Printers, Resin Curing Boxes, 3D Pens, Filament Refills And Various Accessories, Ensuring All You Need For A Rewarding 3D Printing Experience..
High Compatibility: Sunlu Filament Dryer S4 Supports A Wide Range Of Materials Including Pla, Pla Plus, Pla Meta, Petg, Abs, Tpu, Pa, Pc, Nylon, Etc., Compatible With 1.75Mm, 2.85Mm, And 3.00Mm..
Diy More Possibilities: Sunlu Filament Dryer S4 Can Be Modified To Dry 3Kg Large Rolls Of Filament Or Function As A Shoe Dryer. We've Created A Video To Demonstrate The Process. Feel Free To Check Out More Details!.
3 Circulation Fans: Three High-Quality Fans Circulate Air Inside, Ensuring Consistent Temperature Across The Entire Area For More Even Drying, 360° Surround Heating..
Temperature Adjustment And Timer: Temperature Setting Range Is 35-70°C, Timer Setting Range Is 0-99 Hours. Users Can Adjust Parameters To Suit Filament Conditions..
350W Ptc Heater: Sunlu Filament Dryer S4 Is Equipped With A 350W Ptc Heater, Offering Safety And Higher Heating Efficiency (50% Higher Than The Filadryer S2)..
Sunlu S4 Packing List: Filadryer S4 *1, Power Cable *1, 8Cm Ptfe Tube *4, 100Cm Ptfe Tube *2, User Guide *1, Pieces Of Clips, Pieces Of Silicone Plugs..
Filament Dryer S4 Size: Sunlu Filament Dryer S4 Is Notably Large In Size. External Size-460(L)*220(W)*310(H)Mm, Internal Size-450(L)*175(W)*207(H)Mm, Net Weight-4Kg..
Features
- 4 Spool Capacity: SUNLU filament dryer S4 can dry up to four 1kg 3D printer filaments, enhancing drying efficiency and printing quality when drying while printing.
- Filament Dryer S4 Size: SUNLU filament dryer S4 is notably large in size. External size-460(L)*220(W)*310(H)mm, internal size-450(L)*175(W)*207(H)mm, net weight-4KG.
- 8 Filament Exit Holes: SUNLU filament dryer S4 features eight filament outlets, ideal for multiple printers and various filament loading angles, smoother loading and printing.
- 350W PTC Heater: SUNLU filament dryer S4 is equipped with a 350W PTC heater, offering safety and higher heating efficiency (50% higher than the FilaDryer S2).
- 3 Circulation Fans: Three high-quality fans circulate air inside, ensuring consistent temperature across the entire area for more even drying, 360 surround heating.
- Temperature Adjustment and Timer: Temperature setting range is 35-70 C, timer setting range is 0-99 hours. Users can adjust parameters to suit filament conditions.
- High Compatibility: SUNLU filament dryer S4 supports a wide range of materials including PLA, PLA Plus, PLA Meta, PETG, ABS, TPU, PA, PC, Nylon, etc., compatible with 1.75mm, 2.85mm, and 3.00mm.
- DIY More Possibilities: SUNLU filament dryer S4 can be modified to dry 3kg large rolls of filament or function as a shoe dryer. We've created a video to demonstrate the process. Feel free to check out more details!
- SUNLU S4 Packing List: FilaDryer S4 *1, Power Cable *1, 8cm PTFE Tube *4, 100cm PTFE Tube *2, User Guide *1, Pieces of Clips, Pieces of Silicone Plugs.
- SUNLU Main Products: SUNLU provides a diverse selection of premium 3D printing solutions, including 3D printer filament, filament dryers, FDM 3D printers, 3D printer resin, LCD 3D printers, resin curing boxes, 3D pens, filament refills and various accessories, ensuring all you need for a rewarding 3D printing experience.
- See more on Amazon...
Brand: SUNLU | Manufacturer: SUNLU
Dimensions: 12.21 x 18.11 x 8.66 inches | Weight: 8.82 pounds
See On Amazon #3
SUNLU Filament Dryer Box for 3D Printer Filament, S1 Plus Filament Dehydrator with Fan Design, Filament Storage can Keep 1.75 2.85 3.00mm PLA PETG ABS Filament Dry During 3D Printing (Black)
Asin: B09HJL95RH | Model: SUNLU Filament Dryer Box S1 Plus | PartNumber: SUNLU Filament Dryer Box S1 Plus
[Personalized Settings] You Can Adjust The Temperature And Time Of 3D Filament Dryer According To Different Filament And Environment.Adjustable Temperature Range Is 35℃-55℃.After Using The Drying Box, The Print Quality Is Better,Surface Smoother,Good Layer Adhesion..
[Customer Service] After-Sales Service And Technical Support Are Provided.If You Have Any Question About Sunlu 3D Printer Filament Dryer S1 Plus, Please Don't Hesitate To Contact Us.You Can Add The Dryer Box To Shopping Cart First To Help Quick Finding..
[High Compatibility] Maximum Capacity Of Filament Box Is 210*89(H)Mm. Ideal For All 3D Printing Filament 1.75Mm/2.85Mm/3.00Mm Pla Petg Abs Tpu Nylon Pa Filament Material. Compatible With All Major 3D Printer Filament Brands..
[Visual Display] Sunlu Dry Box Can Accurately Detect And Display The Temperature,Time,Humidity In The 2 Inch Lcd Screen.Hold The Left Button To Change The Dry Time, Press The Right Button To Change The Temperature Setting..
Features
- [FAST DRYING WITH FAN] SUNLU 3D printer filament dry box can help you solve the problem of stringing, clogging and poor adhesion caused by wet filament.Upgraded filament dryer adds a fan design,speeding up the discharge of excess water from 3D printer filaments and reducing the impact of wet weather on 3D filament printing.
- [VISUAL DISPLAY] SUNLU dry box can accurately detect and display the temperature,time,humidity in the 2 inch LCD screen.Hold the left button to change the dry time, press the right button to change the temperature setting.
- [PERSONALIZED SETTINGS] You can adjust the temperature and time of 3d filament dryer according to different filament and environment.Adjustable temperature range is 35 -55 .After using the drying box, the print quality is better,surface smoother,good layer adhesion.
- [HIGH COMPATIBILITY] Maximum capacity of filament box is 210*89(H)mm. Ideal for all 3d printing filament 1.75mm/2.85mm/3.00mm PLA PETG ABS TPU Nylon PA filament material. Compatible with all major 3D printer filament brands.
- [CUSTOMER SERVICE] After-Sales Service and Technical Support are provided.If you have any question about SUNLU 3D printer filament dryer S1 Plus, please don't hesitate to contact us.You can add the dryer box to shopping cart first to help quick finding.
- See more on Amazon...
Brand: SUNLU | Manufacturer: SUNLU
Dimensions: 10.67 x 9.33 x 3.94 inches | Weight: 2.65 Pounds
Warranty: 1 Year
See On Amazon #4
[Upgraded with Fan] 2024 SUNLU Official Filament Dryer Box S2 for 3D Printer Filament, Upgrade Filament Storage Dehydrator for PLA PETG ABS Nylon PA Filament 1.75 2.85 3.00mm
Asin: B0BM97WX1D | Model: S2 | PartNumber: S2 | Ean: 0783970261342 | UPC: 783970261342
✅【Easy To Use & Quality Guaranteed】 Allows You To Print While Drying. 2 Inch Large Lcd Screen Monitor,Able To Display Temperature&Time Clearly And Brightly. Decrease Noise When Printing (Less Than 10Db While Operating)..
✅【Drying & Printing At One Time】The Feed-Out Coil Also Allows The Filament To Continue To Dry In The Dryer As It's Being Fed To The Printer. This Means That The Filament Will Be Dry And Ready To Use When It Reaches The Printer..
✅【Wide Compatibility Range】Compatible With A Wide Range Of Filament Brands And Diameters. It Can Work With All Mainstream 3D Filament Brands And All Standard Filament Diameters Of 1.75Mm/2.85Mm/3.00Mm. This Means That It Can Be Used With A Variety Of Filaments, Including Pla, Pla+, Petg, Tpu, Abs, And Even High-End Filaments Like Pa And Pc. This Makes It A Versatile And Convenient Option For Users Who Want To Dry Their Filament..
✅【Touch Screen & Easy Operation】3D Filament Dry Box S2 Has A New Touch Screen That Is Designed To Provide A Tablet-Like Operation Experience For The User. The Screen Is 3.42*2.87 Inches In Size, Which Makes It Easy To Navigate And Use. The Touch Screen Also Allows User To Easily Switch Between ℃ And ℉ And Offers One-Key Recommended Temperature Settings For Different Types Of Filament. This Makes It Easy For The User To Set The Appropriate Drying Temperature For Their Filament..
Features
- Keep Filaments Strong & Flexible By Using SUNLU Filament Dryer Box S2 to removing moisture from the filament before it's used in the 3D printer, S2 filament dryer helps to ensure that the filament will be dryed. which will result in better print quality and fewer failed prints. This is important in save time, money, and frustration by improving the reliability and consistency of their 3D printing process.
- Touch Screen & Easy Operation 3D filament dry box S2 has a new touch screen that is designed to provide a tablet-like operation experience for the user. The screen is 3.42*2.87 inches in size, which makes it easy to navigate and use. The touch screen also allows user to easily switch between and and offers one-key recommended temperature settings for different types of filament. This makes it easy for the user to set the appropriate drying temperature for their filament.
- Easy to Use & Quality Guaranteed Allows you to print while drying. 2 inch large LCD screen monitor,Able to display temperature&time clearly and brightly. Decrease Noise when Printing (less than 10db while operating).
- Wide Compatibility Range compatible with a wide range of filament brands and diameters. It can work with all mainstream 3D filament brands and all standard filament diameters of 1.75mm/2.85mm/3.00mm. This means that it can be used with a variety of filaments, including PLA, PLA+, PETG, TPU, ABS, and even high-end filaments like PA and PC. This makes it a versatile and convenient option for users who want to dry their filament.
- Drying & Printing at One Time The feed-out coil also allows the filament to continue to dry in the dryer as it's being fed to the printer. This means that the filament will be dry and ready to use when it reaches the printer.
- See more on Amazon...
Brand: UNIDO | Manufacturer: SUNLU INC.,
Warranty: 2 year manufature
See On Amazon #5
Sovol Filament Dryer 2023, SH01 Filament Dehydrator 3D Printer Spool Holder with Upgraded Fan, Dry Box for Keeping Filament Dry, Compatible with 1.75mm, 2.85mm Filament & PLA PETG TPU ABS
Asin: B09686Z5R3 | Model: SV-SH01-1 | PartNumber: SV-SH01-1
【Excellent Power-Off Drying Mode】Silicone & Ptfe Seal Makes It Possible To Store Filaments For A Long Time Without Power And Protects Your Filaments From Moisture And Dirt. You Can Put 4 Bags Of Desiccants (Not Included In The Package) Inside The Dryer Box To Improve Drying Efficience & Quality..
【Heating More Evenly】 The Unique Design Of The Built-In Fan In The Box Is Based On The Principle Of Modynamics Of Air, Makes The Filament Heated More Evenly. Sh01 Makes Drying More Efficient. Any Questions About The Product Please Feel Free To Contact Us. Our Technical Support Team Will Provide Service As Soon As We Can..
【Large Capacity】 Sovol Dryer Box Can Store 2 Filament Rolls With A Width Of Less Than 70 Mm Or 1 Filament Roll With A Width Of Less Than 150 Mm. Please Open The Ptfe Seals On The Top Of The Box During Heating For Moisture Evaporation..
【Real-Time Monitoring Of Temp And Humidity Inside】Displays The Humidity And Temperature In The Dry Box In Real Time. Setting Temperature 40 °, 45 °, 50 ° C And Setting Time From 6 Hours To 12 Hours. If You Use Sh01 In A Room With Room Temperature Under 16℃, The Temperature In The Dryer Box Would Not Come Up To 50℃. But Do Not Worry, This Would Not Decrease Drying Effect..
Features
- Remove Excess Moisture 3D printer filaments are hygroscopic, moisture would cause printing failure. Sovol SH01, a great addition to 3d printer, can remove excess moisture, keep your filament dry and bring you better prints. The surface of prints will be smoother, the layer adhesion increased. No more brittle PLA, PETG, ABS filament.
- Real-time Monitoring of Temp and Humidity inside Displays the humidity and temperature in the dry box in real time. Setting temperature 40 , 45 , 50 C and setting time from 6 hours to 12 hours. If you use SH01 in a room with room temperature under 16 , the temperature in the dryer box would not come up to 50 . But do not worry, this would not decrease drying effect.
- Excellent Power-off Drying Mode Silicone & PTFE seal makes it possible to store filaments for a long time without power and protects your filaments from moisture and dirt. You can put 4 bags of desiccants (not included in the package) inside the dryer box to improve drying efficience & quality.
- Large Capacity Sovol dryer box can store 2 filament rolls with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm. Please open the PTFE seals on the top of the box during heating for Moisture evaporation.
- Heating More Evenly The unique design of the built-in fan in the box is based on the principle of modynamics of air, makes the filament heated more evenly. SH01 makes drying more efficient. Any questions about the product please feel free to contact us. Our technical support team will provide service as soon as we can.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
Dimensions: 9.53 x 9.69 x 6.89 inches | Weight: 3.66 pounds
See On Amazon #6
2024 SUNLU Official Filament Dryer Box S4,Four-Spool 3D Printer Dehydrator with Rapid Heating, Auto Humidity Control, and Advanced Triple Fan Upgrade,Compatible with PLA,PETG,ABS,TPU,PA
Asin: B0CRYDN5X9 | Model: SUNLUS4 | PartNumber: SUNLUS4
Auto Humidity Control - The Sunlu Filadryer S4 Incorporates A High-Precision Humidity Sensor, Displaying Real-Time Interior Humidity. Even When The Filament Dryer Is In Standby, It Will Automatically Activate When The Interior Humidity Reaches Or Exceeds 50%, Preventing Secondary Moisture Exposure. Thus, It Can Also Serve As Your Filament Storage Box..
Universal Compatibility - The Sunlu S4 Filament Dehydrator Is Compatible With Pla, Pla+, Petg, Tpu, Abs, Pa, Pc, Nylon, And Other High-End 3D Filaments. It Works Perfectly With All Standard Filament Diameters: 1.75Mm, 2.85Mm, 3.00Mm..
After Sale Service- We Provide A Lifetime Of Professional Technical Support. If You Encounter Any Issues While Using It, Please Contact Us (The Seller) Directly Through The 'Ask A Question' Feature..
Easy To Use - The Adjustable Temperature Range Is 35°C To 70°C, With A Setting Time From 0 To 99 Hours. This 3D Printer Filament Dryer Features A Large Touch Screen, Providing A Tablet-Like Operation Experience. It Also Comes With Pre-Configured Temperature And Drying Time Settings For Commonly Used Filaments Such As Pla, Abs, Petg, As Well As Pa And Pc. This Reduces Setup Complexities And Enhances Your User Experience..
Fast Heating & Drying Evenly - The Sunlu S4 Filament Dryer Is Equipped With A Ptc Heating Element And A Triple-Fan Configuration. The Interior Heat Is Efficiently Circulated With Three Fans, Making The Heating Process More Even. Additionally, The S4 Filament Dry Box Achieves Rapid Heating Up To 70 °C In Record Time. The Robust 350W Ptc Heater Is 6.9 Times More Powerful Than The Sunlu S2, Ensuring An Accelerated And Efficient Filament Drying Experience..
Features
- Four-Spool Filament Dryer Box - SUNLU S4 is the first filament dryer box capable of accommodating four 1kg spools simultaneously. It is equipped with eight filament holes and PTFE tubes, meeting the demands for drying multiple filaments and enabling concurrent printing with multiple printers.
- Fast Heating & Drying Evenly - The SUNLU S4 filament dryer is equipped with a PTC heating element and a triple-fan configuration. The interior heat is efficiently circulated with three fans, making the heating process more even. Additionally, the S4 filament dry box achieves rapid heating up to 70 C in record time. The robust 350W PTC heater is 6.9 times more powerful than the SUNLU S2, ensuring an accelerated and efficient filament drying experience.
- Auto Humidity Control - The SUNLU FilaDryer S4 incorporates a high-precision humidity sensor, displaying real-time interior humidity. Even when the filament dryer is in standby, it will automatically activate when the interior humidity reaches or exceeds 50%, preventing secondary moisture exposure. Thus, it can also serve as your filament storage box.
- Easy to Use - The adjustable temperature range is 35 C to 70 C, with a setting time from 0 to 99 hours. This 3D printer filament dryer features a large touch screen, providing a tablet-like operation experience. It also comes with pre-configured temperature and drying time settings for commonly used filaments such as PLA, ABS, PETG, as well as PA and PC. This reduces setup complexities and enhances your user experience.
- Universal Compatibility - The SUNLU S4 filament dehydrator is compatible with PLA, PLA+, PETG, TPU, ABS, PA, PC, Nylon, and other high-end 3D filaments. It works perfectly with all standard filament diameters: 1.75mm, 2.85mm, 3.00mm.
- After Sale Service- We provide a lifetime of professional technical support. If you encounter any issues while using it, please contact us (the seller) directly through the 'Ask a Question' feature.
- See more on Amazon...
Brand: YOOPAI | Manufacturer: YOOPAI3D
Weight: 2.20 Pounds
See On Amazon #7
SUNLU Official Filament Dryer S1 Plus, Built-in Circulation Fan, Filament Dryer Box Storage Box for 3D Printer Filament 1.75 2.85 3.00, S1 Plus White
Asin: B08C9RZPMN | Model: SUNLU Filament Dryer S1 Plus | PartNumber: SUNLU Filament Dryer S1 Plus | Ean: 0782950697805 | UPC: 782950697805
【Personalized Drying Time Setting】 The Default Continuous Drying Time Of The Drying Box Is 6 Hours, And You Can Also Manually Set The Drying Time. The Time Setting Range Is 0~24 Hours. Commonly Used 3D Filament On The Market Under Normal Circumstances Only Need 3-6 Hours Of Drying To Achieve A Good Printing Experience And Printing Effect..
【User-Friendly Design&1 Year Guaranteed After-Sales Service】 A: The Design Of Two Rollers Inside The Box Allows You To Print While Drying; B: 2 Inch Large Screen Lcd Monitor, Can Display Temperature And Time Clearly And Brightly; C: Ultra Quiet Design, Less Than 10Db While Operating, No Disturbing Of Your Life And Work; D: Exquisite Packaging Design- Best Gift: Come On To Buy One To Present To Your Friends Who Love 3D Printing.
【Importance Of Filament Dryer】Any Material Of Filaments Will Absorb Moisture From The Air, Filament Being Old Or In High Humidity Place May Absorb A Lot. Damp Filament Will Cause Many Printing Issues, Filament Dryer Can Remove Moisture From The Damp Filament..
【Compatible With 99% Of 3D Filament Spools】A: Maximum Capacity Of Sunlu Dry Box Is Φ210*85(H)Mm. B: Compatible With All The Mainstream 3D Filament Brands Sunlu, Geeetech, Eryone, Esun, Amazon Basic Etc.; C: Works Perfectly With All Standard Filament Diameters 1.75Mm/2.85Mm/3.00Mm..
【Personalized Temperature Setting】The User Can Adjust The Temperature Of The Drying Box According To Different 3D Filament Type, Ambient Temperature, Humidity And Other Factors. Adjustable Temperature Range 35℃~55℃. Suitable For More Than 20 Kinds Of 3D Printing Filament Commonly Used In The Market.
Features
- Say Goodbye to Poor 3D Printing by Wet Filament Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. SUNLU FDM 3D Filament Dryer Enclosure can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments.
- Personalized Temperature Setting The user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors. Adjustable temperature range 35 ~55 . Suitable for more than 20 kinds of 3d printing filament commonly used in the market
- Personalized Drying Time Setting The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time. The time setting range is 0~24 hours. Commonly used 3D filament on the market under normal circumstances only need 3-6 hours of drying to achieve a good printing experience and printing effect.
- Compatible with 99% of 3D Filament Spools A: Maximum capacity of SUNLU dry box is 210*85(H)mm. B: Compatible with all the mainstream 3D filament brands SUNLU, GEEETECH, ERYONE, ESUN, AMAZON BASIC etc.; C: Works perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm.
- User-friendly Design&1 Year Guaranteed After-Sales Service A: The design of two rollers inside the box allows you to print while drying; B: 2 inch large screen LCD monitor, can display temperature and time clearly and brightly; C: Ultra quiet design, less than 10db while operating, no disturbing of your life and work; D: Exquisite packaging design- best gift: Come on to buy one to present to your friends who love 3D printing
- Importance of Filament Dryer Any material of filaments will absorb moisture from the air, filament being old or in high humidity place may absorb a lot. Damp filament will cause many printing issues, filament dryer can remove moisture from the damp filament.
- See more on Amazon...
Brand: SUNLU | Manufacturer: SUNLU
Weight: 2.69 Pounds
See On Amazon #8
Creality Space PI Filament Dryer, 3D Printer Filament Dryer Box with 360 Heating, Upgraded Filament Dehydrator Storage Box Support Nylon ABS PETG PLA TPU 1.75/2.85mm Material
Asin: B0CQJVF7CR
Wide Compatibility: The Filament Dryer Is Compatible With A Variety Of Filament Materials, Such As Pla, Abs, Petg, Tpu, Etc., Meeting The Needs Of Different 3D Printing Projects..
Easy To Use: The Filament Dryer Is Simple To Operate, With A Clear And Intuitive Control Panel. You Can Easily Adjust The Temperature According To Your Needs..
Quiet Operation: The Filament Dryer Is Designed With A Silent Motor, Which Can Operate Quietly Without Disturbing Your Work Or Sleep..
Upgraded Built-In Fan: The Upgraded Built-In Fan Has A Higher Power And A Larger Air Volume, Which Can Quickly Blow Away The Moisture On The Surface Of The Filament, Keeping The Filament Dry For A Long Time..
Features
- 360 Surround Heating: The 3D printer filament dryer adopts a 360 surround heating design, which can quickly and evenly distribute heat to the filament, ensuring that the filament is evenly heated from all directions, preventing the formation of bubbles and improving the printing quality.
- Upgraded Built-in Fan: The upgraded built-in fan has a higher power and a larger air volume, which can quickly blow away the moisture on the surface of the filament, keeping the filament dry for a long time.
- Wide Compatibility: The filament dryer is compatible with a variety of filament materials, such as PLA, ABS, PETG, TPU, etc., meeting the needs of different 3D printing projects.
- Quiet Operation: The filament dryer is designed with a silent motor, which can operate quietly without disturbing your work or sleep.
- Easy to Use: The filament dryer is simple to operate, with a clear and intuitive control panel. You can easily adjust the temperature according to your needs.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Weight: 3.31 pounds
Warranty: 3 Months
See On Amazon #9
Creality Official Filament Dryer Box with Fan for 3D Printer Filament, Upgraded Filament Dehydrator Storage Box, 360 Hot-air Circulates Heating Compatible with 1.75/2.85mm PLA PETG ABS TPU Material
Asin: B0CGQTTF75 | Model: CR-DB002 | PartNumber: CR-DB002
【Freely Set Heating Time】- The Heating Time Can Be Set Freely From 0 To 24 Hours To Dry The Filaments Fully. After The Filament Drying Box Starts Working, It Can Be Monitored In Real-Time Through The Display Screen. Real-Time Humidity And Drying Countdown On The Display Allow You To Track The Drying Conditions..
【Easy To Use】- Creality 3D Printer Filament Dry Box Can Be Used Right Out Of The Box. The Design Of Two Rollers In The Box Allows You To Print While Drying. The Thermal Insulation Cotton On Both Sides Of The Filament Dryer Box Can Prevent You From Being Burned When Printing..
【Wide Compatibility】- 3D Printer Filament Dryer Box Size: 266*237*99Mm. This Drying Box Is Suitable For Most Different Filament Types And Diameters On The Market, Such As Pla, Petg, Abs, Tpu, Asa, Pp, Pc, Pa, And More. Works Perfectly With Filament Diameters Of 1.75Mm And 2.85Mm..
【Personalized Temperature Setting】- Different Drying Temperatures Can Be Set According To Different 3D Filaments. The Heating Temperature Range Is 45℃-65℃. The Drying Box Has A Built-In Fan That Circulates The Hot Air Through 360° Inside The Chamber. It Can Be Heated To 65℃ Within 15 Minutes..
Features
- Remove Moisture from Filament - Creality filament dryer box 2.0 can effectively remove moisture from filament while printing. After drying, it can effectively solve the problems of drawing, clogging, and poor adhesion of the filaments during printing and improve print quality.
- Personalized Temperature Setting - Different drying temperatures can be set according to different 3D filaments. The heating temperature range is 45 -65 . The drying box has a built-in fan that circulates the hot air through 360 inside the chamber. It can be heated to 65 within 15 minutes.
- Freely Set Heating Time - The heating time can be set freely from 0 to 24 hours to dry the filaments fully. After the filament drying box starts working, it can be monitored in real-time through the display screen. Real-time humidity and drying countdown on the display allow you to track the drying conditions.
- Wide Compatibility - 3D printer filament dryer box size: 266*237*99mm. This drying box is suitable for most different filament types and diameters on the market, such as PLA, PETG, ABS, TPU, ASA, PP, PC, PA, and more. Works perfectly with filament diameters of 1.75mm and 2.85mm.
- Easy to Use - Creality 3D printer Filament dry box can be used right out of the box. The design of two rollers in the box allows you to print while drying. The thermal insulation cotton on both sides of the filament dryer box can prevent you from being burned when printing.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 10.47 x 9.33 x 3.90 inches | Weight: 2.34 Pounds
See On Amazon #10
Creality Filament Dryer Box Pro for 3D Printer Filament, Upgraded Filament Dry Box 2.0 1KG 3D Filament Storages Keep Filaments Dry During 3D Printing Filament Dehydrator for PLA PETG ABS TPU Nylon
Asin: B0CJ2YVVFM
✨【Easy To Use】Creality Filament Storage Box Requires No Assembly And Can Be Used Right Out Of The Dry Box. Display Screen And Knob Make It Easy To Operate. Real-Time Humidity Monitoring And Drying Hours Are Displayed Via A Countdown Timer, Allowing You To Track Drying Conditions. After Drying, It Is Best To Store The Filament In A Vacuum Bag To Keep It Dry And Ready For Use..
🎀【Wide Compatibility】Creality Filament Dryer Compatible With Most 1Kg Spool 3D Printer Filament. It Can Perfectly Fit Filament Diameters Of 1.75Mm/2.85Mm. And Can Be Used With A Variety Of Filaments, Such As Pla, Pla+, Petg, Tpu, Abs, Asa, Pp, Pc,Pa(Nylon). Pairing With Teflon Tubes Can Make The Filament Feeding Smoother..
🎁【After Sales Support】We Provide Professional After-Sales Service. Please Kindly Contact Us(Seller) Via "Ask A Question" Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
🍀【Personalized Drying Time/Temperature Setting】You Can Set Different Drying Temperatures And Time To Dry The Filaments Fully According To Different 3D Filament Type, Ambient Temperature, Humidity And Other Factors. Adjustable Temperature Range 45℃~65℃, And The Time Setting Range Is 0~24 Hours..
📌【Improved Print Quality】3D Printing Filaments Are Hygroscopic, Moisture Can Cause Printing Failure. After Using Filament Dryer Box, It Can Effectively Solve The Problems Of Drawing, Clogging, And Poor Adhesion Of The Filaments During Printing And Improve Print Quality..
Features
- Upgraded Design Creality Filament Dry Box 2.0 heats up quickly and has a built-in fan that circulates the hot air through 360 inside the chamber, evenly heating the entire chamber. It can be heated to 65 C within 15 minutes. We have added thermal insulation cotton on the dryer box inner wall to keep warm and anti-scald when printing. Dryer box input voltage: 110V 50/60Hz.
- Improved Print Quality 3D printing filaments are hygroscopic, moisture can cause printing failure. After using filament dryer box, it can effectively solve the problems of drawing, clogging, and poor adhesion of the filaments during printing and improve print quality.
- Easy to Use Creality filament storage box requires no assembly and can be used right out of the dry box. Display screen and knob make it easy to operate. Real-time humidity monitoring and drying hours are displayed via a countdown timer, allowing you to track drying conditions. After drying, it is best to store the filament in a vacuum bag to keep it dry and ready for use.
- Personalized Drying Time/Temperature Setting You can set different drying temperatures and time to dry the filaments fully according to different 3D filament type, ambient temperature, humidity and other factors. Adjustable temperature range 45 ~65 , and the time setting range is 0~24 hours.
- Wide Compatibility Creality filament dryer compatible with most 1KG spool 3D Printer filament. It can perfectly fit filament diameters of 1.75mm/2.85mm. And can be used with a variety of filaments, such as PLA, PLA+, PETG, TPU, ABS, ASA, PP, PC,PA(nylon). Pairing with Teflon tubes can make the filament feeding smoother.
- After Sales Support We provide professional after-sales service. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
Weight: 2.20 Pounds
Warranty: 6 months
See On Amazon
Looking For Something Else?
Search