Plastic Closet Pole Socket White Closet Rod Holders Closet Rod Bracket Shower Rod Holders Wardrobe Tube Support for Bathroom Curtain Clothing Store, 1-3/8 Inch (8 Pcs)
Asin: B0BMLDB52P | Model: Closet Rod Holders | PartNumber: Closet Rod Holders
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Easy To Install: This Shower Curtain Rod Holder Is Easy And Convenient To Install, You Only Need To Prepare The Screws And Screwdrivers; Put The Screws Into The Premade Holes In The Support And Fix Them In The Appropriate Position Of The Wardrobe With A Screwdriver, One On Each Side. Note That The Brackets On Both Sides Should Be Symmetrical.
Wide Applications: Our Shower Rod Holder Is Versatile For Being Applied On Various Places, Such As Shower Curtain, Closet Pole, Kitchen Sink, Laundry Room, Living Room, And More, Which Will Bring You A Lot Of Convenience.
Wear Resistant Plastic Material: These Brackets For Closet Rods Are Made Of Quality Plastic Material, Sturdy And Wear Resistant, Reliable And Reusable, And Not Easy To Deform Or Break, So You Can Use Them For A Long Time.
Appropriate Size: The Closet Bar Bracket Measures About 1-3/8 Inch That Fits Most Wardrobe Rods On The Market, And The Inner Diameter Is About 2-3/16 Inches, Outer Diameter Is About 3/4 Inches; Please Check That Your Wardrobe Rod Fits Before Purchase.
Features
- What You Will Receive: the package comes with 4 sets of closet rod holders, 8 pieces closet pole sockets in total, rich quantities are sufficient for meeting your daily use and replacement demands, also enough for sharing with others
- Appropriate Size: the closet bar bracket measures about 1-3/8 inch that fits most wardrobe rods on the market, and the inner diameter is about 2-3/16 inches, outer diameter is about 3/4 inches; Please check that your wardrobe rod fits before purchase
- Easy to Install: this shower curtain rod holder is easy and convenient to install, you only need to prepare the screws and screwdrivers; Put the screws into the premade holes in the support and fix them in the appropriate position of the wardrobe with a screwdriver, one on each side. Note that the brackets on both sides should be symmetrical
- Wear Resistant Plastic Material: these brackets for closet rods are made of quality plastic material, sturdy and wear resistant, reliable and reusable, and not easy to deform or break, so you can use them for a long time
- Wide Applications: our shower rod holder is versatile for being applied on various places, such as shower curtain, closet pole, kitchen sink, laundry room, living room, and more, which will bring you a lot of convenience
- See more on Amazon...
Brand: Amyhill | Manufacturer: Amyhill
Dimensions: 0.71 x 1.96 x 1.96 Inches
See On Amazon Similar To Plastic Closet Pole Socket White
#1
Rise age Stainless Steel Closet Rod Bracket, 1-1/4 Inch Diameter Closet Rod Holder 2 Pcs, Heavy Duty Curtain Rod Holder, Black Closet Rod Support with Screws
Asin: B095RP9318 | Model: RABracket | PartNumber: RABracket | Ean: 0717202041051 | UPC: 717202041051
* Package Included - The Package Of Closet Rod Set Includes 2 Pieces Of Sockets, 6 X Mounting Screws, 6 X Hollow Wall Anchors And 2 Adjustable Screws. The Sockets Hold Tightly Onto The Wall Or Wood Surface. If You Have Any Question, Please Contact Us For Help We Will Reply Within 24 Hours..
*Easy Installation - Select The Position You Want To Install, Mark The Screw Holes With A Pen, Drill And Clean The Hole Debris, Knock The Anchor Into The Hole, And Then Screw It Through The Socket Screw Hole And Fix It, Then Secure The Other Closet Rod Brackets. Pay Attention To Whether The Two Sockets Are On The Same Level. The Mount Has A Screw On The Side To Tighten Against The Rod So That The Rod Doesn't Slide Around..
*Functional U Shape Design - Designed For Use With Closet Rods By 1-1/4 Inch In Diameter, Closet Rod Holders Support Stainless Steel, Solid Wood, Aluminum Alloy And Pvc Pipe. U Shaped Open Type Closet Pole Socket For Quick Installation And Disassembly..
*For Different Applications - These Closet Rod Holders Are Using With Pipe Lever 32Mm (1-1/4 Inch) In Diameter; You Can Set A Pipe Lever On The Closet Brackets, Can Be Applied In Closet ,Bathroom, Window, Laundry Rooms, Wardrobe, Balcony, Clothes Shop And Other Extra Storage Rod, Closet Poles Easy To Hanging Towels, Clothing, Ties And Other Objects..
Features
- * Excellent Quality - Constructed of solid stainless steel, thick and rust-resistant makes It's durable to use. Those closet brackets hold a maximum diameter of 1-1/4 Inch rod.
- *For Different Applications - These closet rod holders are using with pipe lever 32mm (1-1/4 inch) in diameter; You can set a pipe lever on the closet brackets, can be applied in closet ,bathroom, window, laundry rooms, wardrobe, balcony, clothes shop and other extra storage rod, Closet Poles easy to hanging towels, clothing, ties and other objects.
- * Package included - The package of closet rod set includes 2 pieces of sockets, 6 x mounting screws, 6 x hollow wall anchors and 2 adjustable screws. The sockets hold tightly onto the wall or wood surface. If you have any question, please contact us for help we will reply within 24 hours.
- *Functional U Shape Design - Designed for use with closet rods by 1-1/4 inch in diameter, Closet Rod Holders support stainless steel, solid wood, aluminum alloy and PVC pipe. U Shaped Open Type Closet Pole Socket for quick Installation and disassembly.
- *Easy installation - Select the position you want to install, mark the screw holes with a pen, drill and clean the hole debris, knock the anchor into the hole, and then screw it through the socket screw hole and fix it, then secure the other closet rod brackets. Pay attention to whether the two sockets are on the same level. The mount has a screw on the side to tighten against the rod so that the rod doesn't slide around.
- See more on Amazon...
Brand: Rise age | Manufacturer: Rise age
Dimensions: 0.85 x 2.36 x 2.20 Inches | Weight: 3.70 ounces
See On Amazon #2
SuperSlide White Closet Rod Support Pack of 2
Asin: B00K4RRL9W | Model: . | PartNumber: . | Ean: 0075381056298, 0753810562984 | UPC: 753810562984, 075381056298
Used To Secure Hang Rods To Superslide Shelf.
White.
Quantity: Pack Of 2 Supports.
Features
- ClosetMaid Support for SuperSlide Hanging Bar
- Quantity: Pack of 2 supports
- Used to secure hang rods to SuperSlide shelf
- White
- See more on Amazon...
Brand: ClosetMaid | Manufacturer: CLOSETMAID
Weight: 0.17 pounds
See On Amazon #3
Synergy Collection Wardrobe Tube Support, 1 Pair for 1 5/16" Diameter Closet Rod (Zinc, White)
Asin: B007YMGARY | Model: HA80356710 | PartNumber: HA80356710 | Ean: 0117852147521 | UPC: 117852147521
With Two Pins For 5 Mm Holes For Extra Support And Durability.
Finish: White Powder Coated.
Supplied With 1 Half Closed Support And 1 Fully Closed Support.
Diameter: 1-5/16" (32 Mm) X Depth (3/4") 19 Mm X 32 Mm Spacing With An Additional Screw Hole For Side Panel Mounting.
Features
- 1 Pair for 1 5/16" Diameter Wardrobe Tube End Supports HA80356710 Synergy Collection
- Diameter: 1-5/16 (32 mm) x Depth (3/4) 19 mm x 32 mm spacing with an additional screw hole for side panel mounting
- With two pins for 5 mm holes for extra support and durability
- Supplied with 1 Half closed support and 1 Fully closed support
- Finish: White powder coated
- See more on Amazon...
Brand: Hafele | Manufacturer: Hafele
Dimensions: 0.04 x 32.00 x 19.00 Inches | Weight: 0.18 Pounds
See On Amazon #4
OwnMy 6 Packs Closet Rod End Supports Curtain Flange Rod Holder 1-1/4" Diameter, U Shaped Stainless Steel Closet Pole Sockets Opening Flange Rod Bracket for Closet Shelf Wardrobe Shower Curtain, Black
Asin: B07XJ958NM | Ean: 0610895372382 | UPC: 610895372382
Each Bracket Has 3 Holes Fixed Design, And The Side That Touches The Wall Is Flat, Which Making It More Stable And Solid; Overall Dimension Is 2.3" X 2.1" X 0.8", Opening Diameter Is 1-1/4"..
Each Package Includes 6 X Opening Flange Sockets, 18 X Screws, 18 X Mounting Anchors, Ensure Easy Installation And Hold Tightly Onto The Wall Or Wood Surface..
The U Shaped Sockets Allow For Easy Installation Or Quick Removal Of The Rod, It Also Has Additional Holes For Adjustable Screws To Prevent Them From Rotating When Using..
These Closet Pole Sockets Are Made Of High Quality Stainless Steel, Is Better Than Normal Plastic One, Heavy-Duty And Rust-Resistant, Which Can Be Used For A Long Time And Save You Some Money..
Features
- U shaped closet flange rod holder set suitable for closet poles up to 1-1/4" in diameter, could be applied in closet, bathroom, window, laundry rooms and other extra storage rod, easy to hanging towels, clothing, ties and other objects.
- These closet pole sockets are made of high quality stainless steel, is better than normal plastic one, heavy-duty and rust-resistant, which can be used for a long time and save you some money.
- Each bracket has 3 holes fixed design, and the side that touches the wall is flat, which making it more stable and solid; Overall dimension is 2.3 x 2.1 x 0.8, opening diameter is 1-1/4.
- The U shaped sockets allow for easy installation or quick removal of the rod, it also has additional holes for adjustable screws to prevent them from rotating when using.
- Each package includes 6 x Opening Flange Sockets, 18 x Screws, 18 x Mounting Anchors, ensure easy installation and hold tightly onto the wall or wood surface.
- See more on Amazon...
Brand: OwnMy | Manufacturer: OwnMy
Dimensions: 0.01 x 7.87 x 5.91 Inches | Weight: 0.75 Pounds
See On Amazon #5
OwnMy 4 Packs Closet Rod End Supports 1-1/2" Diameter, U Shaped Stainless Steel Closet Pole Sockets Flange Rod Holder for Closet Wardrobe Shower Curtain (Silver Tone)
Asin: B08D69L4XV | Ean: 0631384987801 | UPC: 631384987801
Each Bracket Has 3 Holes Fixed Design, And The Side That Touches The Wall Is Flat, Which Making It More Stable And Solid; Overall Dimension Is 6.4Cm X 5.5Cm X 2Cm / 2.5" X 2.2" X 0.8", Opening Diameter Is 3.8Cm / 1.5"..
Each Package Includes 4 X Opening Flange Sockets, 12 X Screws, 12 X Mounting Anchors, Ensure Easy Installation And Hold Tightly Onto The Wall Or Wood Surface..
The U Shaped Sockets Allow For Easy Installation Or Quick Removal Of The Rod, It Also Has Additional Holes For Adjustable Screws To Prevent Them From Rotating When Using..
These Closet Pole Sockets Are Made Of High Quality Stainless Steel, Is Better Than Normal Plastic One, Heavy-Duty And Rust-Resistant, Which Can Be Used For A Long Time And Save You Some Money..
Features
- U shaped closet flange rod holder set suitable for closet poles up to 38mm / 1-1/2" in diameter, could be applied in closet, bathroom, window, laundry rooms and other extra storage rod, easy to hanging towels, clothing, ties and other objects.
- These closet pole sockets are made of high quality stainless steel, is better than normal plastic one, heavy-duty and rust-resistant, which can be used for a long time and save you some money.
- Each bracket has 3 holes fixed design, and the side that touches the wall is flat, which making it more stable and solid; Overall dimension is 6.4cm x 5.5cm x 2cm / 2.5 x 2.2 x 0.8, opening diameter is 3.8cm / 1.5.
- The U shaped sockets allow for easy installation or quick removal of the rod, it also has additional holes for adjustable screws to prevent them from rotating when using.
- Each package includes 4 x Opening Flange Sockets, 12 x Screws, 12 x Mounting Anchors, ensure easy installation and hold tightly onto the wall or wood surface.
- See more on Amazon...
Brand: OwnMy | Manufacturer: OwnMy
See On Amazon #6
Closet Pro HD CD-0010-WT Heavy Duty Closet Pole Sockets, White
Asin: B00BKMXZWW | Model: CD-0010-WT | PartNumber: CD-0010-WT | Ean: 0077355001006 | UPC: 077355001006
1 Open-Lip Socket Helps You Install The Sockets Before Inserting A Closet Pole.
Includes One Open-Lip And One Closed Socket.
Durable White Powder-Coat Finish.
For Use With Closet Poles From 1-1/4 Inch To 1-5/16 Inch In Diameter.
Features
- Allows for installation of a closet pole all the way to the wall
- For use with closet poles from 1-1/4 inch to 1-5/16 inch in diameter
- 1 open-lip socket helps you install the sockets before inserting a closet pole
- Durable white powder-coat finish
- Includes one open-lip and one closed socket
- See more on Amazon...
Brand: Knape & Vogt | Manufacturer: KNAPE & VOGT
Dimensions: 4.06 x 6.50 x 6.25 Inches | Weight: 0.00 Pounds
Warranty: Warranty
See On Amazon #7
Canomo 4 Packs Heavy Duty Stainless Steel Closet Rod End Supports U-Shaped Closet Pole Sockets Flange Rod Holder with Screws, 1-1/4 Inches Diameter, Black
Asin: B07TTJC2DZ | Model: closet rod supports-3 | PartNumber: closet rod supports-3 | Ean: 0746362572167 | UPC: 746362572167
Designed For Use With Closet Rods Up To 32Mm(1-1/4 Inch) In Diameter. Each Bracket Has 3 Holes Fixed Design, Making It More Stable And Solid.
Package Includes 4 X Open-Lip Sockets, 12 X Mounting Screws, 12 X Hollow Wall Anchors And 4 X Adjustable Screws,The Sockets Can Hold Tightly Onto The Wall Or Wood Surface.
Note: Each Closet Rod Bracket Holds Up To 50Kg. A Set Of Two Brackets Offers A Total Weight Capacity Of Up To 100Kg.
Easy To Install, Each Set Comes As A "U" Shaped Mated Pair, Which Allows For Easy Installation Or Quick Removal Of The Rod.
Features
- Color: black; Material: stainless steel, thick and rust resistant, which can be applied for a long time
- Easy to install, each set comes as a U shaped mated pair, which allows for easy installation or quick removal of the rod
- Designed for use with closet rods up to 32mm(1-1/4 inch) in diameter. Each bracket has 3 holes fixed design, making it more stable and solid
- Note: each closet rod bracket holds up to 50kg. A set of two brackets offers a total weight capacity of up to 100kg
- Package includes 4 x open-lip sockets, 12 x mounting screws, 12 x hollow wall anchors and 4 x adjustable screws,the sockets can hold tightly onto the wall or wood surface
- See more on Amazon...
Brand: Canomo | Manufacturer: Canomo
Dimensions: 2.00 x 3.00 x 2.00 Inches | Weight: 0.53 Pounds
See On Amazon #8
Prime-Line N 6568 Closet Pole Sockets, 1-3/8 In., Plastic, White (1 Set)
Asin: B007UTSALU | Model: N 6568 | PartNumber: N 6568 | Ean: 0049793065681, 6848429002540, 0343538578796, 0784497760424 | UPC: 784497760424, 049793065681, 343538578796
White Plastic Construction.
Please Refer To The Line Art Drawing For Dimensions And Compare With Your Needs Before Ordering.
1-3/8 Inch Inside Diameter X 2-3/16 Inch Outside Diameter X 3/4 Inch Reach.
Features
- Used for mounting 1-3/8 inch closet poles
- 1-3/8 inch inside diameter x 2-3/16 inch outside diameter x 3/4 inch reach
- White plastic construction
- Please refer to the line art drawing for dimensions and compare with your needs before ordering
- See more on Amazon...
Brand: PRIME-LINE | Manufacturer: Prime-Line Products
Dimensions: 0.75 x 2.18 x 2.18 Inches | Weight: 0.07 Pounds
Warranty: Goods are warranted against manufacturing defects for 1 year. In no case is Prime-Line responsible for user related damage or damage incurred during installation. Warranty is void if products are subjected to abnormal conditions, misapplication or abuse.
See On Amazon #9
John Sterling, Platinum Pro HD RP0022-18/30 Adjustable Closet Rod, 18 30-Inch, 18-30 inch
Asin: B000HM5UF6 | Model: RP0022-18/30 | PartNumber: RP0022-18/30 | Ean: 0077355218305 | UPC: 077355218305
Platinum Finish: Platinum Is A Generic Color Description And Is Part Of The Gray Color Family.
Includes: One Closet Rod And Hardware.
Zinc Construction: Closet-Pro By John Sterling Makes Long-Lasting Closet Rods.
Great Build: Can Be Mounted With Or Without A Cleat.
Rod: 1" Diameter Rod.
Features
- FULLY ADJUSTABLE: Adjusts from 30" to 48" to fit your unique closet design
- ROD: 1 diameter rod
- PLATINUM FINISH: Platinum is a generic color description and is part of the gray color family
- GREAT BUILD: Can be mounted with or without a cleat
- INCLUDES: One closet rod and hardware
- ZINC CONSTRUCTION: Closet-Pro by John Sterling makes long-lasting closet rods
- See more on Amazon...
Brand: Knape & Vogt | Manufacturer: John Sterling
Dimensions: 10.50 x 19.00 x 10.50 inches | Weight: 0.75 pounds
See On Amazon #10
LED Garage Light 4 Pack, 120W Ultra Bright LED Shop Light with 4 Adjustable Panels, 12000LM E26/E27 Base Deformable Ceiling Light Fixtures for Garage, Workshop, Attic, Basement, Barn (Black-4 Pack)
Asin: B08YWQ8PZW | Model: Tap water extender | PartNumber: Tap water extender | Ean: 6973536930889
Easy Installation: Suitable For E26/E27 Medium Base, Installation Is As Simple As A Light Bulb, Screw-In, And Play. No Tools, No Wiring, And No Professional Electricians Are Needed. Please Make Sure The Switch Is Turned Off Before Installation!.
Warranty & Service: Super Bright Light For Garage, Warehouse, Workshop, Basement, Shed, Attic, Shops, Etc. Backed With 12-Month Warranty And Friendly Tech Support To Help With Any Questions Or Concerns. Buy With Confidence!.
Heavy Duty & Long Life: The Garage Lights Are Made With A Safe Premium Pc Housing, High-Temperature Resistant, And Corrosion-Resistant. Which Is Good For Heat Dissipation And Stability, And Helps Extend The Life Of The Light. Over 65,000 Hours Of Lifetime.
Super Bright Led Garage Light: Design With 288 Pcs Top Quality Chips That 6500K Daylight For Your Garage, Which Is 2.5 Times Efficient Compared With The Normally Led Chip Installed On Other Led Ceiling Lights. Equvis To 8 Traditional Light Bulbs, Save Up To 85% On Your Electricity Bill. Providing The Best Indoor Lighting Experience.
Features
- Adjustable Design: Unique wide-angle LED garage lighting design with 4 adjustable panels. Each panel can be folded over 90 degrees, which will make the light cover 360 area, no dark areas, ghosting, or glare. It is the best choice to replace the old three-leaf garage light!
- Super Bright Led Garage light: Design with 288 Pcs top quality chips that 6500K daylight for your garage, which is 2.5 times efficient compared with the normally led chip installed on other led ceiling lights. Equvis to 8 traditional light bulbs, save up to 85% on your electricity bill. Providing the best indoor lighting experience
- Easy installation: Suitable for E26/E27 medium base, installation is as simple as a light bulb, screw-in, and play. No tools, no wiring, and no professional electricians are needed. Please make sure the switch is turned off before installation!
- Heavy Duty & Long Life: The garage lights are made with a safe premium PC housing, high-temperature resistant, and corrosion-resistant. which is good for heat dissipation and stability, and helps extend the life of the light. Over 65,000 hours of lifetime
- Warranty & Service: Super bright light for garage, warehouse, workshop, basement, shed, attic, shops, etc. Backed with 12-MONTH WARRANTY and friendly tech support to help with any questions or concerns. Buy with confidence!
- See more on Amazon...
Brand: Tudoccy
Dimensions: 4.00 x 14.00 x 4.00 Inches | Weight: 3.00 Pounds
Warranty: 12 months.
See On Amazon #11
HOME MASTER HARDWARE Heavy Duty Closet Shelf & Rod Brackets, Wall Mounted Closet Shelves Bracket with Rod Shelving Support, White with Screws 10-Pack
Asin: B081V3RWFR | Ean: 0842001160310 | UPC: 842001160310
👗We Recommend Using A 24-Inch Length Of Board For Each Pair Of Brackets. If Your Boards Are Longer, We Suggest Increasing The Number Of Brackets To Ensure Proper Support..
👗11 X 9.5 In Shelf And Rod Support Brackets Come With Mounting Screws Hardware So Installation Is Quick And Easy. Package Include 10 Pack Shelf And Hang Rod Support Brackets,Each Bracket With 4 Pcs Screws..
👗Shelf Anf Rod Bracket Can Be Used In Kitchen, Garages, Basements, Storage Rooms, Stores, Offices, And Factories. Perfect For Bookbrack, Clapboard, Exhibition Stand, Elegant Pattern Design Adds A Touch Off Decorative Style..
👗Floating Brackets Help Create More Space Of Wall For Storage Or Display In Any Room. Suitable For Small Places And Make It Tidier..
👗Versatile Shelf And Rod Support Maximum Load Is 300 Lbs Per Pair..
Features
- Heavy duty closet pole support brackets are made from high quality steel, include portions for supporting both a clothes rod and a shelf, white finish, durable, sturdiness and long-lasting use.
- Versatile shelf and rod support maximum load is 300 lbs per pair.
- We recommend using a 24-inch length of board for each pair of brackets. If your boards are longer, we suggest increasing the number of brackets to ensure proper support.
- Floating brackets help create more space of wall for storage or display in any room. Suitable for small places and make it tidier.
- 11 x 9.5 in Shelf and rod support brackets come with mounting screws hardware so installation is quick and easy. Package include 10 Pack shelf and hang rod support brackets,each bracket with 4 pcs screws.
- Shelf anf rod bracket can be used in kitchen, garages, basements, storage rooms, stores, offices, and factories. Perfect for bookbrack, clapboard, exhibition stand, elegant pattern design adds a touch off decorative style.
- See more on Amazon...
Brand: HOME MASTER HARDWARE | Manufacturer: Home Master
Weight: 8.00 Pounds
See On Amazon #12
Dewell 2 Pcs Shelf and Rod Brackets, Wall Mounted Shelf Supports White,SRB300
Asin: B07S7CQFGF | Model: dewellsrb300 | PartNumber: dewellsrb300 | Ean: 0653472906679 | UPC: 653472906679
Easy Installation --- Coming With Screws And Anchors, Easy To Install..
Package Included –-- 2 X Angle Brackets,4 X Long Screws, 4 X Short Screws And 4 X Anchors, No Wood Board Included.
Measurement---Shelf Brackets Dimension-11.8*9.8Inch(300*250Mm); Thickness-2Mm; Width-27Mm.
Sturdy & Rustic--- Made Of Heavy Duty Cast Iron, With Premium White Powder Coat Finished, Adds A Touch Of Elegant Taste To Your Home.
Features
- WIDE APPLICATION---This closet rod and shelf support is perfect for display bookshelf, bookracks, storage shelf ,exhibition stand and it can also support closet rods.
- STURDY & RUSTIC--- Made of heavy duty cast iron, with premium white powder coat finished, adds a touch of elegant taste to your home
- EASY INSTALLATION --- Coming with screws and anchors, easy to install.
- MEASUREMENT---Shelf Brackets Dimension-11.8*9.8inch(300*250mm); Thickness-2mm; Width-27mm
- PACKAGE INCLUDED -- 2 x Angle Brackets,4 x long screws, 4 x short screws and 4 x anchors, NO WOOD BOARD INCLUDED
- See more on Amazon...
Brand: Dewell | Manufacturer: dewell
Dimensions: 1.70 x 13.00 x 11.00 Inches
See On Amazon #13
9 Cube Closet Organizers And Storage | Includes All Storage Cube Bins | Easy To Assemble Closet Storage Unit With Drawers | Room Organizer For Clothes, Baby Closet Bedroom, Playroom, Dorm (White Grey)
Asin: B0BFG6BLZW | Ean: 0810056657819 | UPC: 810056657819
★ Store ’N’ Style! This Isn’T Just Any Ordinary Cube Organizer Bookcase! Exclusively And Exquisitely Designed, All Components Precisely Matched, It’S Got To Be The Prettiest Way To Organize! Enjoy It As A Trendy Piece Of Furniture That Enhances Any Room, Living Room, Bedroom, Kids Room Laundry Room And What Not!.
★ You Can Diy! Easy To Install, Fun To Build! Follow The Step By Step Instructions, No Skills Or Tools Necessary! Once Assembled, Design The Layout According To Your Taste And Space, With The Many Configurations This Cubicle Cubby Shelf Offers..
★ Pile It On! Made To Handle The Big Stuff, This Top Quality Cubby Shelving Won’T Disappoint. Each Cube Is Supported By 4 Strengthening Steel Bars And A Rust Proof Iron Frame, Covered With Durable Material That Is Dustproof. So Store Away!.
★ Multiple Size Cubes! This Multi-Functional Cube Storage Organizer Is Your Homes Best Friend! With 2 Size Baskets, Small And Large Capacity, Nothing Is Too Big Or Too Tiny To Utilize It For! Store Clothing, Towels, Blankets, Nurseries, Dvd's, Linen, Crafts, Books, Craft Supplies, Files, Magazines, Toys And Whatnot! Perfect Dorm Room Essentials For Collage Students Guys, Boys Or Girls.
Features
- ALL BASKETS INCLUDED! It s a One Stop Shop here, our cubby storage organizer comes replete with the beautiful, quality set of matching foldable fabric bins with handles! Don t wait to find just the right cubes, unpack, assemble and start storing! - DIMENSIONS: 36 x 43 x 12 Inches.
- MULTIPLE SIZE CUBES! This multi-functional cube storage organizer is your homes best friend! With 2 size baskets, small and large capacity, nothing is too big or too tiny to utilize it for! Store clothing, towels, blankets, nurseries, DVD's, linen, crafts, books, craft supplies, files, magazines, toys and whatnot! Perfect dorm room essentials for collage students guys, boys or girls
- STORE N STYLE! This isn t just any ordinary cube organizer bookcase! Exclusively and exquisitely designed, all components precisely matched, it s got to be the prettiest way to organize! Enjoy it as a trendy piece of furniture that enhances any room, living room, bedroom, kids room laundry room and what not!
- PILE IT ON! Made to handle the big stuff, this top quality cubby shelving won t disappoint. Each cube is supported by 4 strengthening steel bars and a rust proof iron frame, covered with durable material that is dustproof. So store away!
- YOU CAN DIY! Easy to install, fun to build! Follow the step by step instructions, no skills or tools necessary! Once assembled, design the layout according to your taste and space, with the many configurations this cubicle cubby shelf offers.
- See more on Amazon...
Brand: NEATERIZE | Manufacturer: NEATERIZE
Dimensions: 31.00 x 12.00 x 36.00 inches | Weight: 14.57 pounds
See On Amazon #14
Prime-Line N 6794 1-3/8 In. Wooden Closet Pole Socket (1 Set)
Asin: B002O3A9WA | Model: N 6794 | PartNumber: N 6794 | Ean: 0756655951845, 0049793067944 | UPC: 049793067944, 756655951845
Accepts 1-3/8 Inch Closet Rod.
A Phillips Head Screwdriver Is Required For Installation.
Please Refer To The Line Art Drawing For Dimensions And Compare With Your Needs Before Ordering.
2-Pack.
Mounting Hardware Included.
Hardwood Construction.
Universal Design.
Features
- Used as end holders for closet rods
- Universal design
- Accepts 1-3/8 inch closet rod
- Hardwood construction
- 2-pack
- Mounting hardware included
- A Phillips head screwdriver is required for installation
- Please refer to the line art drawing for dimensions and compare with your needs before ordering
- See more on Amazon...
Brand: PRIME-LINE | Manufacturer: Prime-Line Products
Dimensions: 0.62 x 2.50 x 2.50 Inches | Weight: 0.09 Pounds
Warranty: Goods are warranted against manufacturing defects for 1 year. In no case is Prime-Line responsible for user related damage or damage incurred during installation. Warranty is void if products are subjected to abnormal conditions, misapplication or abuse.
See On Amazon #15
4 Packs Stainless Steel Wardrobe Bracket U-Shaped Rod Socket Flange 1-1/4" Diameter Heavy Duty Closet Rod Brackets End Supports for Closet Rod with Screws (Silver)
Asin: B0B4WKBZ69 | Model: 301530 | PartNumber: 301530
First, Select The Position You Want To Install,Mark The Screw Holes With A Pen, Then Drill The Holes, Install The Screws And Fix Them,What’S More,Secure The Other Bracket, You Need To Keep The Two Bracket On The Same Level.There Is One On The Side Of The Mount Screws For Tightening The Rod So That The Rod Does Not Slip..
Package Includes:Each Package Includes 4 X Opening Flange Sockets, 12 X Screws, 12 X Mounting Anchors, Ensure Easy Installation And Hold Tightly Onto The Wall Or Wood Surface..
Wide Application:These Stainless Steel Rod Brackets Can Hold A Maximum Diameter Of 25Mm/1 Inch Rod.Perfect For Closet Storage, Balcony Drying, Bathroom Curtain, Kitchen Storage, Storage Room, Wardrobe, Clothes Drying Room, And Other Place In Your Home,As A Hanging Storage Space For Clothing..
Functional U Shape Design:Each Stainless Steel Bracket Is Designed In A "U" Shape For Quick Installation Or Removal, All With 3 Holes Fixing Design For Screw Fixation And Won't Move Easily, Making It More Stable And Sturdy..
Features
- Premium Quality:These heavy duty closet rod holder are made from high quality stainless steel,thick and rust-resistant,making it more durable and to use.Our closet trolley brackets are will keep looking great after long-term use and are not easy to deform
- Functional U Shape Design:Each stainless steel bracket is designed in a U shape for quick installation or removal, all with 3 holes fixing design for screw fixation and won't move easily, making it more stable and sturdy.
- First, Select the position you want to install,mark the screw holes with a pen, then drill the holes, install the screws and fix them,What s more,secure the other bracket, you need to keep the two bracket on the same level.There is one on the side of the mount Screws for tightening the rod so that the rod does not slip.
- Wide Application:These stainless steel rod brackets can hold a maximum diameter of 25mm/1 Inch rod.Perfect for closet storage, balcony drying, bathroom curtain, kitchen storage, storage room, wardrobe, clothes drying room, and other place in your home,as a hanging storage space for clothing.
- Package includes:Each package includes 4 x Opening Flange Sockets, 12 x Screws, 12 x Mounting Anchors, ensure easy installation and hold tightly onto the wall or wood surface.
- See more on Amazon...
Brand: yuntop | Manufacturer: yuntop
Dimensions: 1.18 x 6.30 x 4.33 Inches
See On Amazon #16
Leviton 128-W 15-Amp 660-Watt Twin Light-Socket Adapter, White
Asin: B008SDHX6U | Model: 128-W | PartNumber: 128-W | Ean: 0078477209417 | UPC: 078477209417
15 Amps; 660 Watts; 250 Volts; Medium Base.
Measures Approximately 4 Inches Long By 2 Inches Wide By 4 Inches High.
2-Pole/2-Wire Design; Cam-Type; Taper Nose; Ul-Csa Rated.
Attractive Ivory Color Nicely Accommodates Surrounding Decor.
Features
- Light-socket adapter converts a single socket into a twin socket
- Attractive ivory color nicely accommodates surrounding decor
- 15 amps; 660 watts; 250 volts; medium base
- 2-pole/2-wire design; cam-type; taper nose; UL-CSA rated
- Measures approximately 4 inches long by 2 inches wide by 4 inches high
- See more on Amazon...
Brand: Leviton | Manufacturer: Leviton Direct
Dimensions: 1.50 x 3.00 x 3.00 Inches | Weight: 0.20 Pounds
Warranty: Manf Warranty
See On Amazon #17
Nuk3y Heavy Duty Adjustable Shelf Rod Support Bracket (White)
Asin: B016CH4YWE | Model: DD06-32WC | PartNumber: DD06-32WC | Ean: 7963090632724
Adjustable Shelf Bracket.
See Spec Image For Measurement Details.
Available In White & Black Finish.
Complete With Screws.
Features
- Projection: 12-1/4 from Mounting Surface
- Complete with Screws
- Adjustable shelf bracket
- Available in White & Black Finish
- See Spec image for measurement details
- See more on Amazon...
Brand: NUK3Y PRODUCTS K3 | Manufacturer: NUK3Y PRODUCTS K3
Weight: 1.00 Pounds
See On Amazon #18
QCAA Heavy Duty Solid Metal Closet Rod Socket Set, 1-3/8'', Matte White, 1 Pair, Made In Taiwan
Asin: B09V2BLL8G | Model: PS05-001 | PartNumber: PS05-001
Soild Metal Base To Hold Durable Weight.
Two Kinds Of Mounting Screw Included For Option: #8X3/4" Steel Screw For Wood Closet. And #8X1" Stainless Steel Screw + Plastic Anchor For Shower Curtain Rail Rod Install To Wall..
Flanges Provide For Clost Pole Socket, Shower Cartainrod, Wall Mounting Handrail, And Other Special Railing Projects.
Accept 1-3/8'' In Diameter Rod Pole.
Features
- Solid Heavy Metal Construction
- Accept 1-3/8'' In Diameter Rod Pole
- Soild Metal Base To Hold Durable Weight
- Flanges Provide For Clost Pole Socket, Shower Cartainrod, Wall Mounting Handrail, And Other Special Railing Projects
- Two Kinds Of Mounting Screw Included For Option: #8x3/4 Steel Screw For Wood Closet. And #8x1 Stainless Steel Screw + Plastic Anchor For Shower Curtain Rail Rod Install To Wall.
- See more on Amazon...
Brand: QCAA | Manufacturer: QCAA
Dimensions: 2.00 x 2.00 x 0.50 Inches | Weight: 0.24 Pounds
See On Amazon #19
Legrand Pass & Seymour 1406ICC10 250W 125V Medium Base A26 Lampholder Adapter with Two Outlets, Pull Chain On/Off, Ivory (1 Count)
Asin: B000F5K820 | Model: 1406ICC10 | PartNumber: 1406ICC10 | Ean: 0785007156300, 0785007859652 | UPC: 785007156300, 785007859652
Manufactured In China.
Ivory Medium Base.
Lamp/Outlet Adapter With Built-In Dual 2-Prong Outlets For Added Convenience.
66-Watts 12-Volts Single To Twin Lamp Holder With Pull Chain.
Total Outlet: 2.
Adds Extra Shine To Your Product.
Features
- 250W, 125V, ivory, 2 pole, 2 wire, Medium base, lamp holder with 2 outlets
- Adds Extra shine to your product
- Manufactured in China
- Total Outlet: 2
- Lamp/Outlet Adapter with Built-in dual 2-prong outlets for added convenience
- 66-Watts 12-Volts Single to Twin Lamp holder with Pull Chain
- Ivory Medium base
- See more on Amazon...
Brand: Pass & Seymour | Manufacturer: Legrand Pass & Seymour
Dimensions: 0.81 x 5.88 x 3.19 Inches
See On Amazon #20
ADHERION XL Adhesive Shower Rod Holder | Heavy Duty Tension Rod Holder | Heat Resistant, Waterproof, Shower Curtain Rod Holders No Drilling | Tension Rod Support | White | 2 Pack | Rod Not Included |
Asin: B08D39PPBW | Model: RRXL White | PartNumber: RRXL White | Ean: 0656750862919 | UPC: 656750862919
Adheres To Any Surface - Whether You Have Stone, Tile, Or Painted Walls, Our High-Tech 3M Curtain Rod Holder No Drill Adheres Securely To Most Common Surfaces For A Long-Lasting, Heat And Moisture-Resistant Curtain Rod Holders For Wall.
Choose The Perfect Fit For Your Shower Rod - Be Sure To Select The Correct Size For Your Shower Rod. Our Small Size Shower Rod Holders For Wall No Drill Fit Rods Up To 1.5" In Diameter, While Our Large Size Fits Curtain Rods Up To 2.75" In Diameter At Their Ends. Upgrade Your Shower Zen Today With Adherion's Adhesive No Hole Curtain Rod Holders.
Sleek And Elegant Design - Our Rod Holder For Curtain Feature A Low-Profile Design That Seamlessly Blends With Your Bathroom's Style. No Logos Or Unsightly Branding Here, Just A Beautifully Accessorized And Secured Shower.
Damage-Free, Tool-Free Installation - No Need To Damage Your Bathroom's Tile Or Walls With Drilling Or Screws. With Our Rod Retainer Stick On Curtain Rod Holder, Simply Peel And Stick The Durable Abs Plastic Brackets For A Secure Tension Rod Support That Won't Budge.
Features
- Never Worry About Falling Shower Rods Again - Say goodbye to falling shower rods with Adherion's adhesive curtain rod holder. Our high-tech 3M adhesive ensures your tension rod stays right where it s supposed to, so you can enjoy a relaxing shower without interruptions
- Damage-Free, Tool-Free Installation - No need to damage your bathroom's tile or walls with drilling or screws. With our Rod Retainer stick on curtain rod holder, simply peel and stick the durable ABS plastic brackets for a secure tension rod support that won't budge
- Adheres to Any Surface - Whether you have stone, tile, or painted walls, our high-tech 3M curtain rod holder no drill adheres securely to most common surfaces for a long-lasting, heat and moisture-resistant curtain rod holders for wall
- Sleek and Elegant Design - Our rod holder for curtain feature a low-profile design that seamlessly blends with your bathroom's style. No logos or unsightly branding here, just a beautifully accessorized and secured shower
- Choose The Perfect Fit for Your Shower Rod - Be sure to select the correct size for your shower rod. Our Small size shower rod holders for wall no drill fit rods up to 1.5 in diameter, while our Large size fits curtain rods up to 2.75 in diameter at their ends. Upgrade your Shower Zen today with Adherion's adhesive no hole curtain rod holders
- See more on Amazon...
Brand: Adherion | Manufacturer: Adherion
Dimensions: 2.80 x 2.80 x 2.80 inches | Weight: 0.08 Pounds
Warranty: 6 Month Warranty
See On Amazon
Looking For Something Else?
Search