40-120 NTC Thermistor Kit 50PCS Metal Thin Film Thermistor MF55 B3435 10K Temp Sensor Insulated Thermal Resistor for Communication Network Power Resistor
Asin: B0BN8BYH8S | Model: WALFRONT2vgo5tauyp | PartNumber: WALFRONT2vgo5tauyp
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Wide Application: Widely Used In Electric Power, Aerospace, Communication Network, Consumer Electronics, Automobile, And Other Fields.
50Pcs In Total: The Package Contain A Total Of 50Pcs Ntc Thermistor, Enough For You To Replace And Use, Very Convenient.
Strong Material: Metal Film Material, Possess Good Heat Insulation Effect, Good Toughness And Strength, The Use Of Temperature Range -40~120℃.
Reliable Insulation: Insulated Film Package, 0.15 Thickness, Possess High Reliability, Can Work Stably For A Time.
Features
- COMPACT AND FAST: Thin film NTC Thermistor come with small size, fast speed, resistance value for 10K
- RELIABLE INSULATION: Insulated film package, 0.15 thickness, possess high reliability, can work stably for a time
- WIDE APPLICATION: Widely used in electric power, aerospace, communication network, consumer electronics, automobile, and other fields
- STRONG MATERIAL: Metal film material, possess good heat insulation effect, good toughness and strength, the use of temperature range -40~120
- 50PCS IN TOTAL: The package contain a total of 50pcs NTC thermistor, enough for you to replace and use, very convenient
- See more on Amazon...
Brand: Walfront | Manufacturer: WALFRONT
See On Amazon Similar To 40120 NTC Thermistor Kit 50PCS
#1
5PCS Creality 3D Printer NTC Thermistor 100K, NTC 3950 100K ohm Thermistor Temp Sensor for Creality Ender 3/Ender 3 Pro/Ender 3 Neo/Ender 3 Max/Voxelab Aquila, XH2.54-2P Connector (1.3m/51.1inch)
Asin: B0714MR5BC | Model: 3D-RMDZ-5PCS | PartNumber: 3D-RMDZ-5PCS | Ean: 0649910034431 | UPC: 649910034431
Ntc Thermistor: Used For Heated Bed Or Hot End. Our Ender 3 Pro Thermistor Replacement Is Compatible With Most 3D Printers..
After-Sales Service: If You Have Any Unsolvable Problems While Using The Ender 3 Thermistor Replacement, Please Feel Free To Contact Us. Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
Long Life Service: High Precision, High Sensitivity, And Fast Temperature Conduction, High-Temperature Resistance..
Note Before Buying: Our Ender 3 Thermistor Is Not Fit For Ender 3 V2/Ender 3S/Cr-10S Pro V2/Cr-10S Pro/Ender 2 Pro/Ender 6/Prusa I3 3D Printer. Please Measure The Length Of Your 3D Printer's Thermistor And Confirm Whether This Thermistor Is Compatible With Yours Before Buying..
Features
- Wire Length: 51.1inch /1.3m. The package includes 5 3D printer thermistors. 2-pin XH2.54 female connector.
- Note Before Buying: Our Ender 3 thermistor is not fit for Ender 3 V2/Ender 3S/CR-10S Pro V2/CR-10S Pro/Ender 2 Pro/Ender 6/Prusa i3 3D Printer. Please measure the length of your 3D printer's thermistor and confirm whether this thermistor is compatible with yours before buying.
- NTC Thermistor: Used for heated bed or hot end. Our Ender 3 pro thermistor replacement is compatible with most 3D printers.
- Long Life Service: High precision, high sensitivity, and fast temperature conduction, high-temperature resistance.
- After-sales Service: If you have any unsolvable problems while using the Ender 3 thermistor replacement, please feel free to contact us. Our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Comgrow
See On Amazon #2
HICTOP Ender 3 Thermistor 1.2m/47.2 Inches NTC 3950 100k Thermistor Temp Sensor for Reprap Creality Ender 3,Ender 3 Pro,Ender 3 Neo,Ender 3 Max,CR-10 10S,Prusa i3, 3D Printer 2Pin XH2.54 (Pack of 5)
Asin: B097SSXSX6 | Model: HIC-002 | PartNumber: HIC-002 | Ean: 0602309981952 | UPC: 602309981952
There Is A 2 Pin Female Connector On The Thermistor For 3D Printer.
Recommended Parameters For The Thermistor: R25℃=100K B25/50=3950K± 1%.
Wire Length For The 100K Thermistor 3D Printer: 1.2M/47.2 Inches..
Ender 3 Thermistor Is Compatible With Most 3D Printers In The Market Such As Ender3,Ender3 Pro,Ender3 V2,Ender 3 Neo,Ender 3 Max,Cr-10S Pro V2,Cr-10S Pro,Ender 2 Pro,Ender 6,Prusa I3,Cr-10,Hictop D3 Hero,Voxelab Aquila Etc. 3D Printers.
Features
- HICTOP 3d printer thermistor 1.2m can be used on both of the heated bed and the extruder for 3d printers
- Ender 3 thermistor is compatible with most 3D printers in the market such as ender3,ender3 pro,ender3 V2,Ender 3 Neo,Ender 3 Max,CR-10S Pro V2,CR-10S Pro,Ender 2 Pro,Ender 6,Prusa i3,CR-10,hictop d3 hero,Voxelab Aquila etc. 3D printers
- There is a 2 pin female connector on the thermistor for 3D printer
- Wire length for the 100K thermistor 3d printer: 1.2m/47.2 inches.
- Recommended parameters for the thermistor: R25 =100K B25/50=3950K 1%
- See more on Amazon...
Brand: HICTOP | Manufacturer: HIC Technology
Dimensions: 3.54 x 4.33 x 0.79 inches
See On Amazon #3
WINSINN HT-NTC100K Thermistor Sensor, Ender 3 v2 Upgrade 3x15 3950 XH2.54 2Pin, Compatible with Ender 3 5 Pro CR6 CR10 Series 3D Printer Hotend (Pack of 5Pcs)
Asin: B07F3SMRLJ | Ean: 0686603769546 | UPC: 686603769546
✔️Adopts 304 Stainless Steel, With The Internal Temperature Package To Ensure The Maximum Service Life With Precision Temperature Measurement..
✔️Made By Winsinn. Can Be Used With The New Sensor Heater Block (Temperature Measurement Can Be Up To 350 Degrees)..
✔️Ht-Ntc100k Thermistor Adopts White High-Temperature Cord, Can Bear Higher Temperature. And For Customers' Convenience, The Wires Adopts Line Connection, The Customer Can Tear The Wires Depends On Their Application. The High Temperature Line Is Double Thicker Than Others In The Market, Not Easy To Break Off..
✔️The Temperature Measurement: -50 °C ~ +350 °C, Can Replace The Original K-Type Thermocouple Temperature. Fit For Printing High-Temperature Filament..
Features
- Upgrade HT-NTC100K Thermistor: package temperature measurement. Head diameter: 3mm, Head length: 15mm
- The temperature measurement: -50 C ~ +350 C, can replace the original K-type thermocouple temperature. Fit for printing high-temperature filament.
- Adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement.
- HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers' convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off.
- Made by WINSINN. Can be used with the New Sensor Heater Block (Temperature measurement can be up to 350 degrees).
- See more on Amazon...
Brand: WINSINN | Manufacturer: WINSINN Technology Ltd
See On Amazon #4
4Pcs Ender 3 v2 Thermistor 1m/39.4Inches, 3D Printer 100K ohm NTC 3950 Thermistor Temp Sensor Compatible for Creality Ender 3/Ender 3 Pro/Ender 3 Neo/Ender 5/Voxelab Aquila, 2Pin XH2.54,
Asin: B0CM3FSFF9
This 3D Printer Ohm 100K Ntc Thermistor Compatible For Ender 3 /Ender 3 Pro/Ender 5/Ender 5 Plus/Voxelab Aquila/Cr10/Elegoo Neptune 3, Direct Replacement For Sovol Sv1 Bed Thermistor, Etc..
100K Ohm Ntc 3950 Thermistor Used For 3D Printer Heated Bed Or 3D Printer Hotend. Such As: Ender 3 Hotend, Cr10 Hotend,3D Printer Extruder J-Head Hotend,Etc..
They Are Perfect For The 3D Printer(Ender 3 V2/Ender 3 Pro/Ender 3 Max), But The 1M Wires Are A Bit Short ; So You Need Had To Cut The Thermistor Off And Splice It In And Tape The Splices. Plug And Play With Lerdge K Board For Diy Printer..
Recommended Parameters For The 3D Printer Thermistor: R25℃=100K B25/50=3950K± 1%; Connector : 2Pin Xh2.54..
Features
- Package includes: 4Pcs 1m/39.4 Inches 3D Printer ohm NTC 100K 3950 Thermistor Sensors;
- Recommended parameters for the 3D Printer Thermistor: R25 =100K B25/50=3950K 1%; Connector : 2pin XH2.54.
- This 3D Printer ohm 100k ntc Thermistor Compatible for Ender 3 /Ender 3 Pro/Ender 5/Ender 5 Plus/Voxelab Aquila/CR10/Elegoo Neptune 3, Direct replacement for Sovol SV1 bed thermistor, etc.
- They are Perfect for the 3d printer(Ender 3 V2/Ender 3 Pro/Ender 3 max), but the 1m wires are a bit short ; so you need had to cut the thermistor off and splice it in and tape the splices. Plug and play with Lerdge K board for DIY printer.
- 100K ohm NTC 3950 Thermistor Used for 3D Printer Heated Bed or 3D Printer Hotend. such as: Ender 3 Hotend, CR10 Hotend,3D Printer Extruder J-Head Hotend,etc.
- See more on Amazon...
Brand: TIEXYE | Manufacturer: TIEXYE
See On Amazon #5
Upgrade M3 Hex Screw in Fixing Thermistor 100K 3950 Temperature Sensor for Ender 3 V2 Pro CR10 and Other 3D Printer Extruder Hotend (100K 3950)
Asin: B08YNX79H8 | Model: m3 screw in fixing thermistor | PartNumber: m3 screw in fixing thermistor | Ean: 0791548327406 | UPC: 791548327406
Package: 1Piece M3 Screw In Thermistor.
For The Printer Which Uses Ntc 100K 3950 Thermistor, Then This Thermistor Is Plug And Use.
Thermistor Model: Ntc 100K 3950. Here Is The Firmware Setting: *13:100K Hisens 3950 1% Up To 300°C For Hotend "Simple One " &"Hotend "All In One" #Define Temp_Sensor_0 13.
Diy Players Can Also Modify Block By Themselves. Make An M3 Threaded Hole In Blcok, Then You Can Use This Thermistor.
Features
- M3 screw for installation is Quik and Durable, Flexible and Long Lasting, longer life span
- DIY players can also modify BLOCK by themselves. Make an M3 threaded hole in BLCOK, then you can use this thermistor
- Package: 1piece m3 screw in thermistor
- Thermistor model: NTC 100K 3950. HERE is the firmware setting: *13:100k Hisens 3950 1% up to 300 C for hotend Simple ONE &Hotend All In ONE #define TEMP_SENSOR_0 13
- For the printer which uses NTC 100K 3950 thermistor, Then this thermistor is plug and use
- See more on Amazon...
Brand: POLISI3D | Manufacturer: POLISI3D
See On Amazon #6
ENOMAKER 24V 40W 620 Ceramic Cartridge Heater and NTC Thermistor 100K 3950 for 3D Printer Creality Ender 3 (Pack of 10pcs)
Asin: B07K2Z3YW4 | Model: ENO-Heater&Thermistor | PartNumber: ENO-Heater&Thermistor | Ean: 0705300790926 | UPC: 705300790926
Voltage: 24V, Power: 40W,Diameter: 6Mm ; Length: 20Mm.
Compatible With Creality Ender 3, Ender 3X, Ender-3 Pro 3D Printer, Etc..
Conviniently Pre-Wired With 1 Meter Long High Temperature Teflon Insulated Wiring.
Temperature Sensor 100Kω Accuracy Of ± 1%.
Features
- Thermistor Color : white,Cartridge Heater Material: 304 Stainless Steel
- Temperature sensor 100K accuracy of 1%
- Voltage: 24v, Power: 40w,Diameter: 6mm ; Length: 20mm
- Conviniently pre-wired with 1 meter long high temperature teflon insulated wiring
- Compatible with Creality Ender 3, Ender 3X, Ender-3 Pro 3d printer, etc.
- See more on Amazon...
Brand: ENOMAKER | Manufacturer: ENOMAKER
See On Amazon #7
Official Creality Original Ender 3 S1 Thermistor Sensor 5 Pack, NTC100K 3950K 3D Printer Hotend Replacement Parts Thermistor Temp Sensor Compatible with Sprite Extruder Heater Block
Asin: B09QPH3HMR | Model: HB TH 3S1 | PartNumber: HB TH 3S1
Recommended Parameters For The Thermistor: R25℃=100K B25/50=3950K± 1%.
Designed For Sprite Extruder Standard Kit 260°C, Compatible With Fdm 3D Printer Equipped With Sprite Extruder, Like Ender 3 S1, Ender3 S1 Plus 3D Printer..
There Is A 2-Pin Female Connector On The Thermistor For 3D Printer Sprite Extruder..
The Thermistor Head Size: Φ3x5.5Mm; Cable Length: About 35Mm/ 1.37 Inch..
Features
- 100% Creality Official. Package Include: 5Pcs thermistors.
- The thermistor head size: 3X5.5mm; Cable length: about 35mm/ 1.37 Inch.
- Recommended parameters for the thermistor: R25 =100K B25/50=3950K 1%
- There is a 2-Pin female connector on the thermistor for 3D printer sprite extruder.
- Designed for Sprite Extruder Standard kit 260 C, Compatible with FDM 3D printer equipped with sprite extruder, like Ender 3 S1, Ender3 S1 Plus 3D Printer.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #8
TWTADE 2 Pcs 3M 10K B3950 Thermistor Temperature Sensor,able to Support -25 to 125 Degree Celsius,Sensitive NTC Temperature Sensor Probeprobes has 5 * 25mm Stainless Steel housing NTC-3M-2P
Asin: B086YD9L28 | Model: NTC-3M-2P | PartNumber: NTC-3M-2P | Ean: 0747966685864 | UPC: 747966685864
Wide Application: This Multifunctional Test Probe Can Be Used In Household Air Conditioner, Refrigerator, Water Fountain, Drying Box, Constant Box, Etc..
Package Content：2 X 3 Meter Temperature Sensor.
100% Brand-New Products Are Guaranteed For Two Years. If Quality Problems Are Found During The Guarantee Period, Please Contact Us By Email And We Will Replace Them For Free..
Product Specification : The Line Is Three Meter Long.This Temperature Test Probe Has 5*25Mm Stainless Steel Housing And Able To Tolerate The Widest Measuring Range (-25°C To 125°C (-13℉ To 257℉)..
Features
- Product name : Temperature Sensor
- Product specification : The line is three meter long.This temperature test probe has 5*25mm stainless steel housing and able to tolerate the widest measuring range (-25 c to 125 c (-13 to 257 ).
- Wide Application: This multifunctional test probe can be used in household air conditioner, refrigerator, water fountain, drying box, constant box, etc.
- 100% brand-new products are guaranteed for two years. If quality problems are found during the guarantee period, please contact us by email and we will replace them for free.
- Package content 2 x 3 meter Temperature Sensor
- See more on Amazon...
Brand: TWTADE | Manufacturer: TWTADE
See On Amazon #9
uxcell NTC Thermistors Resistor MF52-103/3435 10K Ohm Inrush Current Limiter Temperature Sensor Pack of 60
Asin: B07L113D9C | Model: a18092200ux0226 | PartNumber: a18092200ux0226
Ntc (Negative Temperature Coefficient) Thermistors, Their Resistance Drops As Temperature Increases..
Widely Used For Air Condition Equipments, Heating Apparatus, Electric Thermometers, Liquid Level Sensors, Etc..
Have Them In A Circuit Built To Accommodate Them, They Will Work Very Well And Consistently..
10K Ohm Thermistors Are Very Useful In Many Applications, And They Are Light For Use..
Features
- NTC thermistors are ethoxyline resin-enveloped thermistors in small size. Used for temperature measurement.
- 10K Ohm thermistors are very useful in many applications, and they are light for use.
- NTC (Negative Temperature Coefficient) thermistors, their resistance drops as temperature increases.
- Have them in a circuit built to accommodate them, they will work very well and consistently.
- Widely used for air condition equipments, heating apparatus, electric thermometers, liquid level sensors, etc.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 2.36 x 1.18 Inches
See On Amazon #10
KOKISO NTC Thermistor Resistors 10 Values 81 PCS Inrush Current Limiter Temperature Sensors Assorted Kit Assortment(3D-25,5D-7,5D-9,5D-11,5D-15,8D-9,10D-9,10D-11,20D-9,47D-15)
Asin: B09LS359K3 | Model: KOKISO-NTC96104 | PartNumber: KOKISO-NTC96104
Easy To Sort: Each Model Has A Small Bag And A Mark. Box Also Has A Marked Model For Easy Identification..
More Values: Provide 10 Commonly Used Ntc Thermistor Resistors Values To Help You More Convenient For Controlling The Inrush Current Of Motor, Heaters, Bulb Voltage Stabilizer, Electronic Energy-Saving Lamp, Etc..
Easy To Store: Provide A High-Quality Box For Easy Management And Storage..
Characteristic: Small Size And Large Power，Large B Value With Wide Range Of Operating Temperature..
Features
- The NTC thermistors Value: 3D-25,5D-7,5D-9,5D-11,5D-15,8D-9,10D-9,10D-11,20D-9,47D-15
- Characteristic: Small size and large power large B value with wide range of operating temperature.
- Easy to Sort: Each model has a small bag and a mark. Box also has a marked model for easy identification.
- Easy to store: Provide a high-quality box for easy management and storage.
- More values: Provide 10 commonly used NTC Thermistor Resistors values to help you more convenient for controlling the inrush current of motor, heaters, bulb voltage stabilizer, electronic energy-saving lamp, etc.
- See more on Amazon...
Brand: KOKISO | Manufacturer: KOKISO
Weight: 0.26 Pounds
See On Amazon #11
1-Pack Upgrade M3x15MM 300C High Temperature Sensor Cartridge Thermistor Compatible with VORON V2.4 V0.1 V1.8 3D Printer, Dragonfly BMS BMO Hotend/Dragon Hotend
Asin: B0B4RN3YYY
Dumet Wire Has The Same Expansion Co-Efficient As That Of The Encapsulating Glass, And The Diffusion Of Cuprous Oxide In The Glass During Encapsulation Is Beneficial To Improve The Encapsulation Strength With The Glass. In The Case Of More Reliable Use, It Has More Accurate Temperature Measurement Performance.
Package: 1Piece Thermistor.
Specially Designed Compatible With Voron Series 3D Printers, Also Can Be Used For Dragonfly Bms Bmo Hotend / Dragon Hotend And All V6 Hotend. If You Wanna Use It For Other 3D Printers, Please Must Change The Connector To Make It Fit Your Printer..
Apply Stainless Steel Close Sleeve Filled With Silicone Grease, Accurate Temperature Measurement, And Using Dumet Wire, Not Easy To Break And Short Circuit. Only 0.2°C Tolerance..
Features
- Model: NTC100K 3950; Cartridge size: OD3 x15mm, 15cm long cable, installed with XH2.54 connector, can sense -30 C -300 C degree
- Apply Stainless Steel Close Sleeve Filled with Silicone Grease, Accurate temperature measurement, and using Dumet wire, Not easy to break and short circuit. Only 0.2 C tolerance.
- Dumet wire has the same expansion co-efficient as that of the encapsulating glass, and the diffusion of cuprous oxide in the glass during encapsulation is beneficial to improve the encapsulation strength with the glass. In the case of more reliable use, it has more accurate temperature measurement performance
- Specially designed compatible with VORON series 3D Printers, also can be used for DragonFly BMS BMO Hotend / Dragon Hotend and All V6 hotend. If you wanna use it for other 3D Printers, please must change the connector to make it fit your printer.
- Package: 1piece thermistor
- See more on Amazon...
Brand: POLISI3D | Manufacturer: POLISI3D
Weight: 0.01 Pounds
See On Amazon #12
HiLetgo 10pcs 3D Printer 100K ohm NTC 3950 Thermistors Sensors with 1m Cable 3D Printers Parts for RepRap Mend Part Temperature Accessories
Asin: B07V6YBFSY | Model: 3-01-1027 | PartNumber: 3-01-1027
Wiring Length: 1 Meter.
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #13
5Pcs Ender 3 Thermistor, NTC 100K Glass Bead Thermistor, 3D Printer NTC 3950 ohm Thermistor Temp Sensor Use for Creality Ender 3,Ender 3 Pro,Ender 3 V2,CR-10,Voxelab Aquila, 2Pin XH2.54,
Asin: B0CL4D5QB8
This 3D Printer Ohm 100K Ntc Thermistor Compatible For Ender 3 /Ender 3 Pro/Ender 3 V2/Ender 5/Ender 5 Plus/Voxelab Aquila/Cr10/Elegoo Neptune 3, Direct Replacement For Sovol Sv1 Bed Thermistor, Etc..
3D Printer Thermistor 1M/39.4 Inches Used For 3D Printer Heated Bed And The Extruder For 3D Printers. It Fits The Standard Size Of An Ender 3 Hot End..
They Are Perfect For The 3D Printer(Ender 3 V2/Ender 3 Pro/Ender 3 Max), But The 1M Wires Are A Bit Short ; So You Need Had To Cut The Thermistor Off And Splice It In And Tape The Splices. Plug And Play With Lerdge K Board For Diy Printer. Don't Forget The Kapton Tape And Insulation Pad..
3D Printer Ntc 100K Ohm 3950 Thermistor Sensors ; Recommended Parameters For The Thermistor: R25℃=100K B25/50=3950K± 1%; Connector : 2Pin Xh2.54..
Features
- Package includes: 5Pcs Upgrade Ender 3 V2 Thermistor, 3D Printer 100k ohm NTC 3950 Thermistor Temp Sensor 1m/39.4 Inches;
- 3D Printer NTC 100K ohm 3950 Thermistor Sensors ; Recommended parameters for the thermistor: R25 =100K B25/50=3950K 1%; Connector : 2pin XH2.54.
- This 3D Printer ohm 100k ntc Thermistor Compatible for Ender 3 /Ender 3 Pro/Ender 3 V2/Ender 5/Ender 5 Plus/Voxelab Aquila/CR10/Elegoo Neptune 3, Direct replacement for Sovol SV1 bed thermistor, etc.
- They are Perfect for the 3d printer(Ender 3 V2/Ender 3 Pro/Ender 3 max), but the 1m wires are a bit short ; so you need had to cut the thermistor off and splice it in and tape the splices. Plug and play with Lerdge K board for DIY printer. Don't forget the Kapton tape and insulation pad.
- 3D Printer Thermistor 1m/39.4 inches Used for 3D Printer Heated Bed and the Extruder for 3D Printers. It fits the standard size of an Ender 3 hot end.
- See more on Amazon...
Brand: TIEXYE | Manufacturer: TIEXYE
See On Amazon #14
XINGYHENG 10Pcs NTC 10K Thermistor Sensors Digital Temperature Probe for Air Conditioner (100cm)
Asin: B078SQH536 | Model: XLX-1516 | PartNumber: XLX-1516 | Ean: 0714973095054 | UPC: 714973095054
3.Cable Length: 100Cm/ 3.3Ft. Package:10Pcs.
5.The Significant Feature: Rapid Response, Durable, High Sensitivity, Compact Structure, Easy Installation, Good Water Resistance, Wide Temperature Range Of Application, Good Stability, High Reliability..
4.Size Of Probe: 5Mm/0.2In*25Mm/0.98In(Diameter*Length). Size Of Terminal: For Xh2.54-2P.
2.Suitable Temperature Range: -20°C ~ +105°C.
Features
- 1.Product type: NTC 10K 1% temperature probe
- 2.Suitable temperature range: -20 c ~ +105 c
- 3.Cable length: 100cm/ 3.3ft. Package:10Pcs
- 4.Size of probe: 5mm/0.2in*25mm/0.98in(Diameter*Length). Size of terminal: For XH2.54-2P
- 5.The significant feature: Rapid response, durable, high sensitivity, compact structure, easy installation, good water resistance, wide temperature range of application, good stability, high reliability.
- See more on Amazon...
Brand: XINGYHENG | Manufacturer: XLX
See On Amazon #15
KOKISO NTC Thermistors Resistors MF52 3950K 10 Values 100 PCS Inrush Current Limiter Temperature Sensor Assorted Kit Assortment(1K , 2K , 3K , 4.7K , 5K , 10K , 20K , 47K , 50K ,100K )
Asin: B09LSCXN32 | Model: KOKISO-98552 | PartNumber: KOKISO-98552
Easy To Sort: Each Model Has A Small Bag And A Mark. Box Also Has A Marked Model For Easy Identification..
More Values: Provide 10 Commonly Used Ntc Thermistor Resistors Values To Help You More Convenient For Air Condition Equipments, Heating Apparatus, Electric Thermometers, Liquid Level Sensors, Etc..
Easy To Store: Provide A High-Quality Box For Easy Management And Storage..
Characteristic: Ntc (Negative Temperature Coefficient) Thermistors, Small Size And Large Power,Large B Value With Wide Range Of Operating Temperature..
Features
- The NTC thermistors Value: 1K ohm, 2K ohm, 3K ohm, 4.7K ohm,5K ohm, 10K ohm, 20K ohm, 47K ohm, 50K ohm, 100K ohm
- Characteristic: NTC (Negative Temperature Coefficient) thermistors, Small size and large power,large B value with wide range of operating temperature.
- Easy to Sort: Each model has a small bag and a mark. Box also has a marked model for easy identification.
- Easy to store: Provide a high-quality box for easy management and storage.
- More values: Provide 10 commonly used NTC Thermistor Resistors values to help you more convenient for air condition equipments, heating apparatus, electric thermometers, liquid level sensors, etc.
- See more on Amazon...
Brand: KOKISO | Manufacturer: KOKISO
Weight: 0.09 pounds
See On Amazon #16
Elves Ender 3 S1 Thermistor Sensor CR10 Smart Pro, Sermoon V1 Pro 3D Printer Hotend Replacement Parts Thermistor Temp Sensor Compatible with Sprite Extruder Heater Block 3 Pack
Asin: B0C1S68DRV | Ean: 8686254966037
The Probe Of This Thermistor Tube Is Made Of Closed Stainless Steel Sleeve, With Strict Package And Much Higher Quality Than The Common Cartridge Thermistor On The Market..
Warranty: Every Product Passed Qc Before Shipment. But If You Have Problem, We Provide Free Return/Exchange In 90 Days, Please Contact Us..
Package: 3Pcs Thermistors.
Designed For Sprite Extruder Standard Kit 300°C, Compatible With Fdm 3D Printer Equipped With Sprite Extruder, Like Ender 3 S1, Ender 3 S1 Pro, Cr10 Smart Pro, Sermoon V1, Sermoon V1 Pro 3D Printer..
Features
- Thermistor rod size: 3x5mm, about 52mm/ 1.25 Inch, apply imported chip, NTC100K B3950, installed with XH1.25 connector, upgraded, can sensor up to 300 for long time working.
- Designed for Sprite Extruder Standard kit 300 C, Compatible with FDM 3D printer equipped with sprite extruder, like Ender 3 S1, Ender 3 S1 pro, CR10 Smart pro, Sermoon V1, Sermoon V1 Pro 3D Printer.
- The probe of this thermistor tube is made of closed stainless steel sleeve, with strict package and much higher quality than the common cartridge thermistor on the market.
- Package: 3pcs thermistors
- Warranty: Every product passed QC before shipment. But if you have problem, we provide free return/exchange in 90 days, please contact us.
- See more on Amazon...
Brand: Generic | Manufacturer: Elves 3d
See On Amazon #17
3PCS 1.2m Ender 3 Thermistor, 3D Printer NTC 3950 100K Thermistor, HT-NTC100K Thermistor Sensor 3X15mm Compatible for V6 Volcano PT100 Ender 3, Ender 3 v2, Ender 5, CR10, CR10s,
Asin: B0C2JZZYR4
This 1.2M 3D Printer Ntc100k Thermistor Compatible With E3d V6 Volcano Pt100 Ender 3/ Ender 3 V2/ Ender 5 /Ender 5 Pro/ Cr10/ A8 Maker Pro Extruder Hotend，Etc..
Tips：After The Product Has Been Opened And Left In The Air For A Long Time, The Copper Metal Part May Change Color, Which Is Normal..
This 3D Printer Thermistor Metal Head Diameter: 3Mm, Head Length: 15Mm,Compatible With The Heatblocks With 3Mm Hole, Such As: Cr10 Plated Copper High Temperature Heating Block, V6 Volcano Pt100 Type Heated Block,Etc..
This 1.2M 3D Printer Ntc 100K 3950 Thermistor Sensor The Temperature Measurement: -50 °C ~ +300 °C, Can Replace The Original K-Type Thermocouple Temperature Sensor. Fit For Printing High-Temperature Filament..
Features
- 3-Pack HT-NTC100K Thermistor Sensor 1.2m, 3D Printer NTC 100K 3950 Thermistor Upgrade 3mmx15mm, connector: XH2.54 2PIN,
- This 1.2m 3D Printer NTC 100K 3950 Thermistor Sensor The temperature measurement: -50 C ~ +300 C, Can replace the original K-type thermocouple temperature sensor. Fit for printing high-temperature filament.
- This 1.2m 3D Printer NTC100K Thermistor Compatible with E3D V6 Volcano PT100 Ender 3/ Ender 3 V2/ Ender 5 /Ender 5 Pro/ CR10/ A8 Maker Pro Extruder Hotend etc.
- This 3D Printer Thermistor Metal head diameter: 3mm, head length: 15mm,Compatible with the heatblocks with 3mm hole, Such as: CR10 plated copper high temperature heating block, V6 Volcano PT100 type heated block,etc.
- Tips After the product has been opened and left in the air for a long time, the copper metal part may change color, which is normal.
- See more on Amazon...
Brand: Makerzone | Manufacturer: Makerzone
See On Amazon #18
24V 40W 620 Ceramic Cartridge Heater and NTC Thermistor 100K 3950 for 3D Printer Creality CR-10S Pro, CR-X,Ender 3,Ender 3 Pro, Ender 3 V2,Prusa Mendel (Pack of 10pcs)
Asin: B07QF1TVJ1 | Model: CR-Heater Kit-24V | PartNumber: CR-Heater Kit-24V | Ean: 0667797512057 | UPC: 667797512057
Temperature Sensor 100Kω Accuracy Of ± 1%.
Package Include: 5Pcs Heater And 5Pcs Thermistor.
Wire Length: 1M/39.4 Inches.
Heater Diameter: 6Mm; Length: 20Mm.
Features
- Heater Voltage: 24v, Power: 40w
- Heater Diameter: 6mm; Length: 20mm
- Temperature sensor 100K accuracy of 1%
- Wire length: 1m/39.4 inches
- Package include: 5Pcs heater and 5Pcs thermistor
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #19
HiLetgo 6pcs NTC Temperature Sensor 5K + 10K 1% NTC B3950 Waterproof Probe Thermistor Accuracy Temperature Sensor Precision Temperature Probe 1M
Asin: B00M1TEFTU | Model: 3-01-0550 | PartNumber: 3-01-0550 | Ean: 0702082657195 | UPC: 702082657195
High Sensitivity And Rapid Response..
Length Of Wire: 1 Meter.
Features
- 3pcs 5K+ 3pcs 10K NTC Temperature Sensor
- Length of wire: 1 meter
- High sensitivity and rapid response.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #20
Elves Sprite Extruder Pro Kit 300 Heater 24V 40W Thermistor High Temperature Sensor for Ender 3 S1/ CR10 Smart Pro 3D Printer (Heating Tube+Thermistor)
Asin: B0C1S8XT91 | Ean: 8686254966075
【Wide Compatible】: The Product Is Compatible With Lab X1 P1p 3D Printer, High Temperature Kit Is Widely Compatible With Various Printing Filament Materials, Such As Pla, Abs, Pteg, Tpu, Pp, Pc, Nylon, Pedk, Pei, And Other Materials..
【Product List】: 1 Set Of Hardened Steel Nozzle Full Metal Hotend Kit+ 2 Hotend Silicone Cover +1 Extra Hardened Steel Nozzle +1Extra Snap + 24V Ceramic Heater Thermistor.
【Design Upgrade】: This Kit Is Upgraded, The Heating Block Upgraded To Chromium-Zirconium Copper Nickel Plating Treatment, High Temperature Resistance Printing, Fast Heat Conduction. The Throat Structure Is Upgraded Also, And The Step Limit Is Added To Cooperate With The Heating Block, Which Perfectly Solves The Problems Of Leakage And Falling Off..
【Upgrade Nozzle】: The Nozzle Is Made Of Hardened Steel And Quenched And Hardened To Make It More Wear-Resistant And Extend Its Service Life; The Inner Wall Roughness Of The Throat And Nozzle Is 0.4Mm, Which Reduces The Phenomenon Of Blockage And Improves The Printing Quality; The Nozzle Structure Is Upgraded, Can Be Disassembled And Replaced, Reducing The Use Cost..
Features
- All Metal Design : The heater block is upgraded from brass to chromium-zirconium copper nickel-plated, which is small in size and light in weight, and can withstand high temperature up to 500 , with faster thermal conductivity.
- Upgrade Nozzle : The nozzle is made of hardened steel and quenched and hardened to make it more wear-resistant and extend its service life; the inner wall roughness of the throat and nozzle is 0.4MM, which reduces the phenomenon of blockage and improves the printing quality; the nozzle structure is upgraded, can be disassembled and replaced, reducing the use cost.
- Wide Compatible : The product is compatible with Lab X1 P1P 3D Printer, High Temperature kit is widely compatible with various printing filament materials, such as PLA, ABS, PTEG, TPU, PP, PC, Nylon, PEDK, PEI, and other materials.
- Design Upgrade : This Kit is Upgraded, the heating block upgraded to chromium-zirconium copper nickel plating treatment, high temperature resistance printing, fast heat conduction. The throat structure is upgraded also, and the step limit is added to cooperate with the heating block, which perfectly solves the problems of leakage and falling off.
- Product List : 1 set of hardened steel nozzle full metal hotend kit+ 2 Hotend Silicone Cover +1 Extra Hardened Steel Nozzle +1Extra Snap + 24V Ceramic Heater Thermistor
- See more on Amazon...
Brand: Generic | Manufacturer: Elves 3d
See On Amazon
Looking For Something Else?
Search