PATIKIL Electric Motor Commutator 8 Gear Teeth 5mm ID 12.7mm OD for Motor Spare Parts
Asin: B0BNKQ59C2
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Copper Bar Number: 8; Total Size: 5 × 12.7 × 11.5Mm / 0.20 × 0.5 × 0.45'' (Od*Id*H); Copper Sheet Height: 11.8Mm / 0.46''..
The Gears Mounted On The Motor Cannot Be Removed..
Made Of Copper Material, It Has Good Wear Resistance And Can Run At High Speed..
Widely Used In Power Tools, Home Appliances, High-Speed Dc Motors, And Other Fields..
Features
- This is a motor accessory that is mainly used to change the direction of the rotor current to keep the motor rotating in the same direction.
- Widely used in power tools, home appliances, high-speed DC motors, and other fields.
- Copper Bar Number: 8; Total Size: 5 12.7 11.5mm / 0.20 0.5 0.45'' (OD*ID*H); Copper sheet height: 11.8mm / 0.46''.
- Made of copper material, it has good wear resistance and can run at high speed.
- The gears mounted on the motor cannot be removed.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon Similar To PATIKIL Electric Motor Commutator 8
#1
PATIKIL Electric Motor Commutator 10 Gear Teeth 10mm ID 22.5mm OD for Motor Spare Parts
Asin: B0BNK9P9ZS
Copper Bar Number: 10; Total Size: 10 × 22.5 × 17.7Mm / 0.39 × 0.89 × 0.70'' (Od*Id*H); Copper Sheet Height: 17.2Mm / 0.68''..
The Gears Mounted On The Motor Cannot Be Removed..
Made Of Copper Material, It Has Good Wear Resistance And Can Run At High Speed..
Widely Used In Power Tools, Home Appliances, High-Speed Dc Motors, And Other Fields..
Features
- This is a motor accessory that is mainly used to change the direction of the rotor current to keep the motor rotating in the same direction.
- Widely used in power tools, home appliances, high-speed DC motors, and other fields.
- Copper Bar Number: 10; Total Size: 10 22.5 17.7mm / 0.39 0.89 0.70'' (OD*ID*H); Copper sheet height: 17.2mm / 0.68''.
- Made of copper material, it has good wear resistance and can run at high speed.
- The gears mounted on the motor cannot be removed.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #2
PATIKIL Electric Motor Commutator 12 Gear Teeth 8mm ID 18.8mm OD for Motor Spare Parts
Asin: B0BNK9GXRT
Copper Bar Number: 12; Total Size: 8 × 18.8 × 13.5Mm / 0.31 × 0.74 × 0.53'' (Od*Id*H); Copper Sheet Height: 13Mm / 0.51''..
The Gears Mounted On The Motor Cannot Be Removed..
Made Of Copper Material, It Has Good Wear Resistance And Can Run At High Speed..
Widely Used In Power Tools, Home Appliances, High-Speed Dc Motors, And Other Fields..
Features
- This is a motor accessory that is mainly used to change the direction of the rotor current to keep the motor rotating in the same direction.
- Widely used in power tools, home appliances, high-speed DC motors, and other fields.
- Copper Bar Number: 12; Total Size: 8 18.8 13.5mm / 0.31 0.74 0.53'' (OD*ID*H); Copper sheet height: 13mm / 0.51''.
- Made of copper material, it has good wear resistance and can run at high speed.
- The gears mounted on the motor cannot be removed.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #3
PATIKIL Electric Motor Commutator 12 Gear Teeth 8mm ID 23mm OD Copper for Motor Spare Parts
Asin: B0BNK9VMB8
Copper Bar Number: 12; Total Size: 8 × 23 × 16Mm / 0.31 × 0.91 × 0.63'' (Od*Id*H); Copper Sheet Height: 15.5Mm / 0.61''..
The Gears Mounted On The Motor Cannot Be Removed..
Made Of Copper Material, It Has Good Wear Resistance And Can Run At High Speed..
Widely Used In Power Tools, Home Appliances, High-Speed Dc Motors, And Other Fields..
Features
- This is a motor accessory that is mainly used to change the direction of the rotor current to keep the motor rotating in the same direction.
- Widely used in power tools, home appliances, high-speed DC motors, and other fields.
- Copper Bar Number: 12; Total Size: 8 23 16mm / 0.31 0.91 0.63'' (OD*ID*H); Copper sheet height: 15.5mm / 0.61''.
- Made of copper material, it has good wear resistance and can run at high speed.
- The gears mounted on the motor cannot be removed.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #4
PATIKIL Carbon Brushes 0.51x0.31x0.2 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack
Asin: B0BRW428H7
The Carbon Brush Cuts Smoothly, And The Copper Wire Is Tight And Does Not Easy To Fall Off. It Has High Wear Resistance, Good Reversing Performance, Good Conductivity, Heat Conduction And Lubrication Performance, And Has Certain Mechanical Strength, Which Has Long Service Life..
Tip: If You Replace The Carbon Brush With A New One, It Is Found That The Carbon Brush Has Been Worn Or Half Worn Within A Few Minutes Or Hours Of Use, Indicating That Your Shaft Rotor Is In Off-Normal Working State, And You Need To Replace The Shaft Rotor In Time..
The Carbon Brush Is Used On The Commutator Or Slip Ring Of The Motor As A Sliding Contact To Lead In The Current. It Is Clamped On The Metal Bracket And Pressed Onto The Shaft By A Spring..
Package Content: 2Pcs Motor Carbon Brushes; Total Length: 31Mm/1.22 Inch; Carbon Brush Size(Lxwxh): 13X8x5mm/ 0.51X0.31X0.2 Inch.
Features
- The carbon brush is cut from hard carbon material with high wear resistance. The raw material is block graphite. It is an important component of electric motors and power tools, use in angle grinders, rotary hammer drill, cut-off saw, circular saw, generator and axle machine, etc.
- Package Content: 2pcs Motor Carbon Brushes; Total Length: 31mm/1.22 inch; Carbon Brush Size(LxWxH): 13x8x5mm/ 0.51x0.31x0.2 inch
- The carbon brush cuts smoothly, and the copper wire is tight and does not easy to fall off. It has high wear resistance, good reversing performance, good conductivity, heat conduction and lubrication performance, and has certain mechanical strength, which has long service life.
- The carbon brush is used on the commutator or slip ring of the motor as a sliding contact to lead in the current. It is clamped on the metal bracket and pressed onto the shaft by a spring.
- Tip: If you replace the carbon brush with a new one, it is found that the carbon brush has been worn or half worn within a few minutes or hours of use, indicating that your shaft rotor is in off-normal working state, and you need to replace the shaft rotor in time.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #5
PATIKIL Electric Motor Commutator 12 Gears Teeth 8mm ID 23mm OD for Motor Spare Parts
Asin: B0BNKXJXP8
Copper Bar Number: 12; Total Size: 8 × 23 × 20Mm / 0.31 × 0.91 × 0.79'' (Od*Id*H); Copper Sheet Height: 19.5Mm / 0.77''..
The Gears Mounted On The Motor Cannot Be Removed..
Made Of Copper Material, It Has Good Wear Resistance And Can Run At High Speed..
Widely Used In Power Tools, Home Appliances, High-Speed Dc Motors, And Other Fields..
Features
- This is a motor accessory that is mainly used to change the direction of the rotor current to keep the motor rotating in the same direction.
- Widely used in power tools, home appliances, high-speed DC motors, and other fields.
- Copper Bar Number: 12; Total Size: 8 23 20mm / 0.31 0.91 0.79'' (OD*ID*H); Copper sheet height: 19.5mm / 0.77''.
- Made of copper material, it has good wear resistance and can run at high speed.
- The gears mounted on the motor cannot be removed.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #6
PATIKIL Electric Motor Commutator 12 Gear Teeth 7.96mm ID 19.2mm OD for Motor Spare Parts
Asin: B0BNKBJVR6
Copper Bar Number: 12; Total Size: 7.96 × 19.2 × 16Mm / 0.31 × 0.76 × 0.63'' (Od*Id*H); Copper Sheet Height: 15.2Mm / 0.60''..
The Gears Mounted On The Motor Cannot Be Removed..
Made Of Copper Material, It Has Good Wear Resistance And Can Run At High Speed..
Widely Used In Power Tools, Home Appliances, High-Speed Dc Motors, And Other Fields..
Features
- This is a motor accessory that is mainly used to change the direction of the rotor current to keep the motor rotating in the same direction.
- Widely used in power tools, home appliances, high-speed DC motors, and other fields.
- Copper Bar Number: 12; Total Size: 7.96 19.2 16mm / 0.31 0.76 0.63'' (OD*ID*H); Copper sheet height: 15.2mm / 0.60''.
- Made of copper material, it has good wear resistance and can run at high speed.
- The gears mounted on the motor cannot be removed.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #7
PATIKIL Carbon Brushes 0.51x0.31x0.2 Inch Round Top for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 2 Pack
Asin: B0BRW2QC2H
The Carbon Brush Cuts Smoothly, And The Copper Wire Is Tight And Does Not Easy To Fall Off. It Has High Wear Resistance, Good Reversing Performance, Good Conductivity, Heat Conduction And Lubrication Performance, And Has Certain Mechanical Strength, Which Has Long Service Life..
Tip: If You Replace The Carbon Brush With A New One, It Is Found That The Carbon Brush Has Been Worn Or Half Worn Within A Few Minutes Or Hours Of Use, Indicating That Your Shaft Rotor Is In Off-Normal Working State, And You Need To Replace The Shaft Rotor In Time..
The Carbon Brush Is Used On The Commutator Or Slip Ring Of The Motor As A Sliding Contact To Lead In The Current. It Is Clamped On The Metal Bracket And Pressed Onto The Shaft By A Spring..
Package Content: 2Pcs Motor Carbon Brushes; Total Length: 34Mm/1.34 Inch; Carbon Brush Size(Lxwxh): 13X8x5mm/ 0.51X0.31X0.2 Inch.
Features
- The carbon brush is cut from hard carbon material with high wear resistance. The raw material is block graphite. It is an important component of electric motors and power tools, use in angle grinders, rotary hammer drill, cut-off saw, circular saw, generator and axle machine, etc.
- Package Content: 2pcs Motor Carbon Brushes; Total Length: 34mm/1.34 inch; Carbon Brush Size(LxWxH): 13x8x5mm/ 0.51x0.31x0.2 inch
- The carbon brush cuts smoothly, and the copper wire is tight and does not easy to fall off. It has high wear resistance, good reversing performance, good conductivity, heat conduction and lubrication performance, and has certain mechanical strength, which has long service life.
- The carbon brush is used on the commutator or slip ring of the motor as a sliding contact to lead in the current. It is clamped on the metal bracket and pressed onto the shaft by a spring.
- Tip: If you replace the carbon brush with a new one, it is found that the carbon brush has been worn or half worn within a few minutes or hours of use, indicating that your shaft rotor is in off-normal working state, and you need to replace the shaft rotor in time.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #8
PATIKIL Carbon Brushes 0.4x0.2x0.2 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 8 Pack
Asin: B0BRW4PJ2V
The Carbon Brush Cuts Smoothly, And The Copper Wire Is Tight And Does Not Easy To Fall Off. It Has High Wear Resistance, Good Reversing Performance, Good Conductivity, Heat Conduction And Lubrication Performance, And Has Certain Mechanical Strength, Which Has Long Service Life..
Tip: If You Replace The Carbon Brush With A New One, It Is Found That The Carbon Brush Has Been Worn Or Half Worn Within A Few Minutes Or Hours Of Use, Indicating That Your Shaft Rotor Is In Off-Normal Working State, And You Need To Replace The Shaft Rotor In Time..
The Carbon Brush Is Used On The Commutator Or Slip Ring Of The Motor As A Sliding Contact To Lead In The Current. It Is Clamped On The Metal Bracket And Pressed Onto The Shaft By A Spring..
Package Content: 8Pcs Motor Carbon Brushes; Total Length: 25Mm/ 1 Inch; Carbon Brush Size(Lxwxh): 10X5x5mm/ 0.4X0.2X0.2 Inch.
Features
- The carbon brush is cut from hard carbon material with high wear resistance. The raw material is block graphite. It is an important component of electric motors and power tools, use in angle grinders, rotary hammer drill, cut-off saw, circular saw, generator and axle machine, etc.
- Package Content: 8pcs Motor Carbon Brushes; Total Length: 25mm/ 1 inch; Carbon Brush Size(LxWxH): 10x5x5mm/ 0.4x0.2x0.2 inch
- The carbon brush cuts smoothly, and the copper wire is tight and does not easy to fall off. It has high wear resistance, good reversing performance, good conductivity, heat conduction and lubrication performance, and has certain mechanical strength, which has long service life.
- The carbon brush is used on the commutator or slip ring of the motor as a sliding contact to lead in the current. It is clamped on the metal bracket and pressed onto the shaft by a spring.
- Tip: If you replace the carbon brush with a new one, it is found that the carbon brush has been worn or half worn within a few minutes or hours of use, indicating that your shaft rotor is in off-normal working state, and you need to replace the shaft rotor in time.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #9
PATIKIL Carbon Brushes 0.6x0.31x2.95 Inch for Electric Motors Power Tool Angle Grinder Table Saw Spare Part Repair, 10 Pack
Asin: B0BRW4P21H
The Carbon Brush Cuts Smoothly, And The Copper Wire Is Tight And Does Not Easy To Fall Off. It Has High Wear Resistance, Good Reversing Performance, Good Conductivity, Heat Conduction And Lubrication Performance, And Has Certain Mechanical Strength, Which Has Long Service Life..
Tip: If You Replace The Carbon Brush With A New One, It Is Found That The Carbon Brush Has Been Worn Or Half Worn Within A Few Minutes Or Hours Of Use, Indicating That Your Shaft Rotor Is In Off-Normal Working State, And You Need To Replace The Shaft Rotor In Time..
The Carbon Brush Is Used On The Commutator Or Slip Ring Of The Motor As A Sliding Contact To Lead In The Current. It Is Clamped On The Metal Bracket And Pressed Onto The Shaft By A Spring..
Package Content: 10Pcs Motor Carbon Brushes; Total Length: 45Mm/ 1.77 Inch; Carbon Brush Size(Lxwxh): 15X8x5mm/ 0.6X0.31X2.95 Inch.
Features
- The carbon brush is cut from hard carbon material with high wear resistance. The raw material is block graphite. It is an important component of electric motors and power tools, use in angle grinders, rotary hammer drill, cut-off saw, circular saw, generator and axle machine, etc.
- Package Content: 10pcs Motor Carbon Brushes; Total Length: 45mm/ 1.77 inch; Carbon Brush Size(LxWxH): 15x8x5mm/ 0.6x0.31x2.95 inch
- The carbon brush cuts smoothly, and the copper wire is tight and does not easy to fall off. It has high wear resistance, good reversing performance, good conductivity, heat conduction and lubrication performance, and has certain mechanical strength, which has long service life.
- The carbon brush is used on the commutator or slip ring of the motor as a sliding contact to lead in the current. It is clamped on the metal bracket and pressed onto the shaft by a spring.
- Tip: If you replace the carbon brush with a new one, it is found that the carbon brush has been worn or half worn within a few minutes or hours of use, indicating that your shaft rotor is in off-normal working state, and you need to replace the shaft rotor in time.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #10
PATIKIL Electric Motor Commutator 7 Gear Teeth 6mm ID 15mm OD for Motor Spare Parts
Asin: B0BNKB8FLQ
Copper Bar Number: 7; Total Size: 6 × 15 × 13Mm / 0.24 × 0.59 × 0.51'' (Od*Id*H); Copper Sheet Height: 10.5Mm / 0.41''..
The Gears Mounted On The Motor Cannot Be Removed..
Made Of Copper Material, It Has Good Wear Resistance And Can Run At High Speed..
Widely Used In Power Tools, Home Appliances, High-Speed Dc Motors, And Other Fields..
Features
- This is a motor accessory that is mainly used to change the direction of the rotor current to keep the motor rotating in the same direction.
- Widely used in power tools, home appliances, high-speed DC motors, and other fields.
- Copper Bar Number: 7; Total Size: 6 15 13mm / 0.24 0.59 0.51'' (OD*ID*H); Copper sheet height: 10.5mm / 0.41''.
- Made of copper material, it has good wear resistance and can run at high speed.
- The gears mounted on the motor cannot be removed.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #11
PATIKIL Electric Motor Commutator 12 Gear Teeth 8mm ID 19.2mm OD for Motor Spare Parts
Asin: B0BNKD9JKC
Copper Bar Number: 12; Total Size: 8 × 19.2 × 16Mm / 0.31 × 0.76 × 0.63'' (Od*Id*H); Copper Sheet Height: 15.2Mm / 0.60''..
The Gears Mounted On The Motor Cannot Be Removed..
Made Of Copper Material, It Has Good Wear Resistance And Can Run At High Speed..
Widely Used In Power Tools, Home Appliances, High-Speed Dc Motors, And Other Fields..
Features
- This is a motor accessory that is mainly used to change the direction of the rotor current to keep the motor rotating in the same direction.
- Widely used in power tools, home appliances, high-speed DC motors, and other fields.
- Copper Bar Number: 12; Total Size: 8 19.2 16mm / 0.31 0.76 0.63'' (OD*ID*H); Copper sheet height: 15.2mm / 0.60''.
- Made of copper material, it has good wear resistance and can run at high speed.
- The gears mounted on the motor cannot be removed.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #12
PATIKIL Electric Motor Commutator 12 Gear Teeth 8mm ID 23mm OD Copper for Motor Spare Part
Asin: B0BNKC269X
Copper Bar Number: 12; Total Size: 8 × 23 × 22Mm / 0.31 × 0.91 × 0.87'' (Od*Id*H); Copper Sheet Height: 21Mm / 0.83''..
The Gears Mounted On The Motor Cannot Be Removed..
Made Of Copper Material, It Has Good Wear Resistance And Can Run At High Speed..
Widely Used In Power Tools, Home Appliances, High-Speed Dc Motors, And Other Fields..
Features
- This is a motor accessory that is mainly used to change the direction of the rotor current to keep the motor rotating in the same direction.
- Widely used in power tools, home appliances, high-speed DC motors, and other fields.
- Copper Bar Number: 12; Total Size: 8 23 22mm / 0.31 0.91 0.87'' (OD*ID*H); Copper sheet height: 21mm / 0.83''.
- Made of copper material, it has good wear resistance and can run at high speed.
- The gears mounted on the motor cannot be removed.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #13
PATIKIL Electric Motor Commutator 8 Gear Teeth 5mm ID 16mm OD for Motor Spare Parts
Asin: B0BNK9KMFZ
Copper Bar Number: 8; Total Size: 5 × 16 × 16Mm / 0.20 × 0.63 × 0.63'' (Od*Id*H); Copper Sheet Height: 15.7Mm / 0.62''..
The Gears Mounted On The Motor Cannot Be Removed..
Made Of Copper Material, It Has Good Wear Resistance And Can Run At High Speed..
Widely Used In Power Tools, Home Appliances, High-Speed Dc Motors, And Other Fields..
Features
- This is a motor accessory that is mainly used to change the direction of the rotor current to keep the motor rotating in the same direction.
- Widely used in power tools, home appliances, high-speed DC motors, and other fields.
- Copper Bar Number: 8; Total Size: 5 16 16mm / 0.20 0.63 0.63'' (OD*ID*H); Copper sheet height: 15.7mm / 0.62''.
- Made of copper material, it has good wear resistance and can run at high speed.
- The gears mounted on the motor cannot be removed.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #14
PATIKIL Electric Motor Commutator 8 Gear Teeth 3.17mm ID 10.5mm OD for Motor Spare Parts
Asin: B0BNK9BWPY
Copper Bar Number: 8; Total Size: 3.17 × 10.5 × 12.5Mm / 0.12 × 0.41 × 0.49'' (Od*Id*H); Copper Sheet Height: 12Mm / 0.47''..
The Gears Mounted On The Motor Cannot Be Removed..
Made Of Copper Material, It Has Good Wear Resistance And Can Run At High Speed..
Widely Used In Power Tools, Home Appliances, High-Speed Dc Motors, And Other Fields..
Features
- This is a motor accessory that is mainly used to change the direction of the rotor current to keep the motor rotating in the same direction.
- Widely used in power tools, home appliances, high-speed DC motors, and other fields.
- Copper Bar Number: 8; Total Size: 3.17 10.5 12.5mm / 0.12 0.41 0.49'' (OD*ID*H); Copper sheet height: 12mm / 0.47''.
- Made of copper material, it has good wear resistance and can run at high speed.
- The gears mounted on the motor cannot be removed.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #15
PATIKIL Electric Motor Commutator 12 Gear Teeth 8mm ID 23mm OD for Motor Spare Part
Asin: B0BNK7PG92
Copper Bar Number: 12; Total Size: 8 × 23 × 18Mm / 0.31 × 0.91 × 0.71'' (Od*Id*H); Copper Sheet Height: 17Mm / 0.67''..
The Gears Mounted On The Motor Cannot Be Removed..
Made Of Copper Material, It Has Good Wear Resistance And Can Run At High Speed..
Widely Used In Power Tools, Home Appliances, High-Speed Dc Motors, And Other Fields..
Features
- This is a motor accessory that is mainly used to change the direction of the rotor current to keep the motor rotating in the same direction.
- Widely used in power tools, home appliances, high-speed DC motors, and other fields.
- Copper Bar Number: 12; Total Size: 8 23 18mm / 0.31 0.91 0.71'' (OD*ID*H); Copper sheet height: 17mm / 0.67''.
- Made of copper material, it has good wear resistance and can run at high speed.
- The gears mounted on the motor cannot be removed.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon
Looking For Something Else?
Search