B&P Lamp Glossy White Finish Steel Canopy Kit, 5-1/8 Inch Diameter
Asin: B0BNNVRFFK | Ean: 0848107063807 | UPC: 848107063807
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Hardware Kit Includes 4 Inch Offset Crossbar With Ground Screw, Matching 1/8M Loop, 2 Pieces Of 1.5 Inch Long 8-32 Screws, 2 Pieces Of 1 Inch Long 8-32 Screws, 2 Matching Acorn Cap Nuts, 1/8Ip Nut, 1/8Ip Lock Washer.
Crossbar Holes 2-3/4 Inch Center To Center 3/4 Inch Height.
Features
- 5-1/8 Inch diameter steel canopy with 1/8IP slip center hole
- Crossbar holes 2-3/4 Inch center to center 3/4 Inch height
- Hardware kit includes 4 Inch offset crossbar with ground screw, matching 1/8M loop, 2 pieces of 1.5 Inch long 8-32 screws, 2 pieces of 1 Inch long 8-32 screws, 2 matching acorn cap nuts, 1/8IP nut, 1/8IP lock washer
- See more on Amazon...
Brand: B&P Lamp
See On Amazon Similar To B P Lamp Glossy White
#1
B&P Lamp Heavy Turned Brass Socket with Brass Knob, Glossy White Finish, 3-Way Function, No Uno Thread
Asin: B0BKR6X6PT
These Sockets Have An E26 Base, Sometimes Referred To As Medium Or Edison Base, And Are Designed To Fit Your Typical Household-Sized Light Bulb..
These Sockets Have A 3-Way Interior That Are Designed For 3-Way Bulbs (Low, Medium, And High) And Are Rated 250 Watts - 250 Volts. They Are Also U.L. And Csa Listed..
The Bottom Cap Is Tapped 1/8 Ip, Which Measures 3/8" Diameter, And Also Comes With A Set Screw For A More Secure Fit..
Each Socket Comes With A Threaded Cap And Shell For Superior Strength And Beauty..
Features
- These high quality sockets, or lamp holders, are specially designed for use in the repair and restoration of fine portable lighting and the manufacture of custom lighting.
- Each socket comes with a threaded cap and shell for superior strength and beauty.
- These sockets have an E26 base, sometimes referred to as medium or Edison base, and are designed to fit your typical household-sized light bulb.
- The bottom cap is tapped 1/8 IP, which measures 3/8 diameter, and also comes with a set screw for a more secure fit.
- These sockets have a 3-Way interior that are designed for 3-Way bulbs (low, medium, and high) and are rated 250 watts - 250 volts. They are also U.L. and CSA listed.
- See more on Amazon...
Brand: B&P Lamp | Manufacturer: B&P Lamp
See On Amazon #2
Brady THTEL-161-483-1-WA 4" Width x 4" Height, B-483 Polyester, Orange with Black on White Warning Arc Flash Label (500 per Roll), Pack of 2
Asin: B0057K1QGA | Model: THTEL-161-483-1-WA | PartNumber: THTEL-161-483-1-WA | Ean: 0662820570875 | UPC: 662820570875
Material Is Designed For High Adhesion To Textured Metals And Low Surface Energy Plastics.
For Use With Bbp81 Label Printer, Brady Ip Series Label Printer, Bradyprinter I5100 Industrial Label Printer, Bradyprinter I7100 Industrial Label Printer, Tht 3" Core Printers.
Ul Approved;Csa Accepted.
Glossy White Polyester With Permanent Rubber Based Adhesive Is Thermal Transfer Printable.
Features
- Pre-printed headers result in multicolor header signs using a single, black print pass
- Glossy white polyester with permanent rubber based adhesive is thermal transfer printable
- Material is designed for high adhesion to textured metals and low surface energy plastics
- UL approved;CSA accepted
- For use with BBP81 Label Printer, Brady IP Series Label Printer, BradyPrinter i5100 Industrial Label Printer, BradyPrinter i7100 Industrial Label Printer, THT 3 Core Printers
- See more on Amazon...
Brand: Brady | Manufacturer: Brady Worldwide, Inc.
Weight: 5.56 pounds
See On Amazon #3
Brady THTEL-25-483-1-DA 6" Width x 4" Height, B-483 Ultra Aggressive Polyester, Red and Black on White Danger Arc Flash Label (1000 per Roll)
Asin: B0057K1QWO | Model: THTEL-25-483-1-DA | PartNumber: THTEL-25-483-1-DA | Ean: 0754473608804 | UPC: 754473608804
Customizable.
Ul Approved, Csa Accepted, Rohs Compliant.
Withstands Temperatures From -40 Degree C To 120 Degree.
Designed For High Adhesion To Textured Metals And Low Surface Energy Plastics.
Features
- Preprinted materials allow customers to print arc flash Labels with variable hazard and safety information, such as the incident energy, hazard category and required personal protection equipment
- Designed for high adhesion to textured metals and low surface energy plastics
- Customizable
- Withstands temperatures from -40 degree C to 120 degree
- UL Approved, CSA Accepted, RoHS Compliant
- See more on Amazon...
Brand: Brady | Manufacturer: Brady Worldwide, Inc.
Weight: 7.80 Pounds
See On Amazon #4
Brady THTEL-161-483-1-DA 4" Width x 4" Height, B-483 Ultra Aggressive Polyester, Red and Black on White Danger Arc Flash Label (1000 per Roll)
Asin: B0057K1Q7O | Model: THTEL-161-483-1-DA | PartNumber: THTEL-161-483-1-DA | Ean: 0662820570868 | UPC: 662820570868
Material Is Designed For High Adhesion To Textured Metals And Low Surface Energy Plastics.
A Ribbon Is Required To Print This Material. Use Part Number Ip-R6007 For The Bradyprinter I5100 Or Brady Ip Series Label Printer; Use R6007 For A Different Printer.
Ul Approved;Csa Accepted.
Glossy White Polyester With Permanent Rubber Based Adhesive Is Thermal Transfer Printable.
Features
- Pre-printed headers result in multicolor header signs using a single, black print pass
- Glossy white polyester with permanent rubber based adhesive is thermal transfer printable
- Material is designed for high adhesion to textured metals and low surface energy plastics
- UL approved;CSA accepted
- A ribbon is required to print this material. Use Part Number IP-R6007 for the BradyPrinter i5100 or BRADY IP Series Label Printer; use R6007 for a different printer
- See more on Amazon...
Brand: Brady | Manufacturer: Brady
Weight: 0.04 Pounds
See On Amazon #5
B&P Lamp Metal Strain Relief Bushing with Nylon Set Screw, 1/8IP, Glossy White
Asin: B0C125YB8G
Measures 11/16 Of An Inch Tall By 1/2 Of An Inch In Diameter.
Fits Twisted Pair Cord And Svt-2 Braided And Plastic Cord.
Cord Entrance Hole Measures .275 Of An Inch In Diameter.
Tapped 1/8Ip By 3/8 Of An Inch Deep.
Features
- Steel strain relief bushing with nylon set screw
- Tapped 1/8IP by 3/8 of an inch deep
- Measures 11/16 of an inch tall by 1/2 of an inch in diameter
- Cord entrance hole measures .275 of an inch in diameter
- Fits twisted pair cord and SVT-2 braided and plastic cord
- See more on Amazon...
Brand: B&P Lamp | Manufacturer: B&P Lamp
See On Amazon #6
B&P Lamp Solid Brass Flat Cap, Tapped 1/8IP, 3/8 Inch Height by 3/4 Inch Diameter, Glossy White
Asin: B0C2JLJ7YJ
Enhance The Look Of Your Lamp With This Modern And Minimalistic Finial Cap.
Minimalistic Glossy White Finish.
This Finial Can Be Used To Add A Touch Of Elegance To Your Lamp Or To Hide The Bare Lamp Pipe End.
Tapped 1/8Ip To Ensure A Nice Fit For Most Lamp Nipples Or Pipes.
Features
- 3/4 inch diameter, 3/8 inch tall solid brass modern cap finial
- Tapped 1/8IP to ensure a nice fit for most lamp nipples or pipes
- Enhance the look of your lamp with this modern and minimalistic finial cap
- This finial can be used to add a touch of elegance to your lamp or to hide the bare lamp pipe end
- Minimalistic glossy white finish
- See more on Amazon...
Brand: B&P Lamp | Manufacturer: B&P Lamp
See On Amazon #7
B&P Lamp 12 Inch Diameter Modern Industrial Dome Shade, Glossy Black
Asin: B0BPZMXRTJ
Has A White Enamel Inside Finish.
These Dome Shades Are A Perfect Compliment To Many Industrial Style Lamps, Pendants, And Fixtures.
Has A 2-1/4 Inch Lip Fitter, 12 Inch Diameter, And Is 5-3/8 Inches Tall.
Features
- Modern industrial style dome shape steel metal shade
- Has a 2-1/4 inch lip fitter, 12 inch diameter, and is 5-3/8 inches tall
- Has a white enamel inside finish
- These dome shades are a perfect compliment to many industrial style lamps, pendants, and fixtures
- See more on Amazon...
Brand: B&P Lamp | Manufacturer: B&P Lamp
See On Amazon #8
B&P Lamp Glossy White Finish Aluminum Lamp Socket Cover Shade Holder and Ring for Medium Base E26 Sockets
Asin: B0BMW9VLWK | Ean: 0848107056687 | UPC: 848107056687
Fits Slip Washer Mount Type Bulb Cages And Many Glass Shades With 1-11/16 (1.70) Inch Inner Diameter Holes.
Excellent Choice For Socket-Cord Type Pendant Fixtures.
End Of Cover Is Tapped 1/8Ip, Or 3/8 Inch Diameter.
Measures 2-11/16 Inches Tall, 1-15/16 (1.96) Inch Max Outside Diameter, 1-17/32 (1.53) Inch Inside Diameter, 1-5/8 (1.63) Inch Fitter Diameter.
Features
- Die cast aluminum socket cover shade holder with detachable screw collar designed for medium base E26 keyless socket interiors compatible with covers
- Measures 2-11/16 inches tall, 1-15/16 (1.96) inch max outside diameter, 1-17/32 (1.53) inch inside diameter, 1-5/8 (1.63) inch fitter diameter
- Fits slip washer mount type bulb cages and many glass shades with 1-11/16 (1.70) inch inner diameter holes
- End of cover is tapped 1/8IP, or 3/8 inch diameter
- Excellent choice for socket-cord type pendant fixtures
- See more on Amazon...
Brand: B&P Lamp | Manufacturer: B&P Lamp
See On Amazon #9
B&P Lamp Pendant Light with Slip Style Bulb Cage Shade, Socket, Cord, and Canopy, Glossy White Finish
Asin: B0CWPJ1K4R | Ean: 0848107093859 | UPC: 848107093859
The Canopy Measures 5-1/4 Inches In Diameter, 1/2 Of An Inch Height, And 2-3/4 Inch Center To Center Mounting Holes And Comes With All Necessary Hardware To Mount To Your Junction Box.
Transform The Look Of Any Room In Your House With This Modern And Trendy Pendant Light That Commands Attention And Offers A Touch Of Sophistication.
The Cord Is A 10 Feet Long (Can Be Cut Down To Any Length You Want) Black Rayon/Nylon Covered Twisted Lamp Cord That Is 18 Gauge And Rated 600 Volts And 105 Degree C.
The Socket Is A Medium Base E26 Keyless Phenolic Socket And Socket Cover With All Necessary Hardware To Assemble, Including A Cord Grip Bushing, Lock Washer, And Two Nipples For Your Choice Of Size.
Features
- The steel wire bulb cage shade measures 7.375 inches tall, 4.97 inches wide, has a wire diameter of 3.55 mm thick, and is secured to the socket cover with the provided shade ring
- The socket is a medium base E26 keyless phenolic socket and socket cover with all necessary hardware to assemble, including a cord grip bushing, lock washer, and two nipples for your choice of size
- The canopy measures 5-1/4 inches in diameter, 1/2 of an inch height, and 2-3/4 inch center to center mounting holes and comes with all necessary hardware to mount to your junction box
- The cord is a 10 feet long (can be cut down to any length you want) black rayon/nylon covered twisted lamp cord that is 18 gauge and rated 600 volts and 105 degree C
- Transform the look of any room in your house with this modern and trendy pendant light that commands attention and offers a touch of sophistication
- See more on Amazon...
Brand: B&P Lamp | Manufacturer: B&P Lamp
See On Amazon #10
B&P Lamp 3 Inch Cord Set Screw Bushing, Glossy White
Asin: B0C42F1763
1/8Ip Male Threads That Are 3/16 Of An Inch Long.
Cord Entrance Hole Measures .385 Of An Inch.
3 Inches Long By 1/2 Of An Inch Diameter.
For Twisted Pair, Svt-2, And Svt-3 Lamp Cord.
Features
- Solid brass cord grip bushing with a hard plastic set screw
- For twisted pair, SVT-2, and SVT-3 lamp cord
- 1/8IP male threads that are 3/16 of an inch long
- 3 inches long by 1/2 of an inch diameter
- Cord entrance hole measures .385 of an inch
- See more on Amazon...
Brand: B&P Lamp | Manufacturer: B&P Lamp
See On Amazon
Looking For Something Else?
Search