Aicosineg Hex Rethreading Die, UNC 3-48 Carbon Steel Thread Die, Hex Rethreading Die Machine Thread Die, Hexagon Taper Pipe, 2 Pcs
Asin: B0BNPDQML5
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Application】- Threading Dies Are Commonly Used In Industrial Metal Working And For Repairing Threads In Stripped Holes Or Bolts. Rolled Threading Dies Have An Increased Advantage Of Strength, Longer Life, And Reduced Material Cost..
【Warm Prompt】- Different Sizes Can Be Chosen On This Listing. Please Check What You Need Before Purchasing..
【Function】- There Are A Variety Of Ways In Which Threading Dies Function.Threading Dies Cut A Male Thread And Are Used With Taps That Cut The Mating Female Threads..
【Advantage】- Threading Dies Are Used To Form Or Cut A Male Thread On The Outside Of Rods Or Bars. Threading Dies Provide Precision In Cutting And Extend The Life Of A Die By Reducing Wear..
Features
- Dimension - Thread Type: 3-48UNC; Hex Size: 15mm / 0.59-inch; Total Thickness: 6.3mm / 1/4-inch.
- Advantage - Threading dies are used to form or cut a male thread on the outside of rods or bars. Threading dies provide precision in cutting and extend the life of a die by reducing wear.
- Application - Threading dies are commonly used in industrial metal working and for repairing threads in stripped holes or bolts. Rolled threading dies have an increased advantage of strength, longer life, and reduced material cost.
- Function - There are a variety of ways in which threading dies function.Threading dies cut a male thread and are used with taps that cut the mating female threads.
- Warm Prompt - Different sizes can be chosen on this listing. Please check what you need before purchasing.
- See more on Amazon...
Brand: Aicosineg | Manufacturer: Aicosineg
See On Amazon Similar To Aicosineg Hex Rethreading Die UNC
#1
60-Pc Master Tap and Die Set - Include SAE Inch Size #4 to 1/2 and Metric Size M3 to M12, Coarse and Fine Threads | Essential Threading Rethreading Tool Kit with Complete Accessories and Storage Case
Asin: B07TYXR42R | Ean: 0858574007211 | UPC: 858574007211
▲ Versatility And Tapered Teeth Design - Perfect To Create New Threads Or Repair Damaged Threads On Most Metals Like Carbon Steel, Cast Iron, Aluminum, Brass, Copper And Stainless Steel; Taps (For Internal Threads) And Dies (For External Threads) Feature With Tapered Teeth That Start Threading More Easily.
▲ Comprehensive Accessories - Comes With (1) Adjustable Tap Handle; (1) T-Type Small Tap Handle; (1) Adjustable Die Handle; (2) Thread Pitch Gauges; (1) Slotted Screwdriver; (1) Storage And Carry Case.
▲ Most Popular Sizes - Set Includes (20) Metric Taps And Dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75; (20) Sae Fractional Taps And Dies For Coarse Thread (Unc): 4-40 Nc, 6-32 Nc, 8-32 Nc, 10-24 Nc, 12-24 Nc, 1/4-20 Nc, 5/16-18 Nc, 3/8-16 Nc, 7/16-14 Nc, 1/2-13 Nc; (12) Sae Fractional Taps And Dies For Fine Thread (Unf): 10-32 Nf, 1/4-28 Nf, 5/16-24 Nf, 3/8-24 Nf, 7/16-20 Nf, 1/2-20 Nf; (2) Npt Tap And Die: 1/8-27 Npt.
▲ Excellent Cutting Performance - All Cutting Teeth Are Precisely Cnc Machined And Accurately Heat Treated To Rockwell Hardness 60 Hrc For Best Threading Performance.
Features
- PREMIUM MATERIAL AND DURABILITY - Industrial grade GCr15 bearing steel construction ensures durability and tool longevity to withstand professional uses
- EXCELLENT CUTTING PERFORMANCE - All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance
- VERSATILITY AND TAPERED TEETH DESIGN - Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel; Taps (for internal threads) and Dies (for external threads) feature with tapered teeth that start threading more easily
- MOST POPULAR SIZES - Set includes (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75; (20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12-24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC; (12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF; (2) NPT tap and die: 1/8-27 NPT
- COMPREHENSIVE ACCESSORIES - Comes with (1) Adjustable Tap Handle; (1) T-type Small Tap Handle; (1) Adjustable Die Handle; (2) Thread Pitch Gauges; (1) Slotted Screwdriver; (1) Storage and Carry Case
- See more on Amazon...
Brand: EFFICERE | Manufacturer: UPHILL MERCHANDISE LLC
See On Amazon #2
Orion Motor Tech SAE Tap and Die Set Standard | #4, 6, 8, 10, 12, 1/4, 5/16, 3/8, 7/16, 1/2" Tap Set and Die Set | Thread Repair Kits for Threading and Rethreading Internal and External Threads
Asin: B082PXPW4Z | Model: TAD-0040_MAIN | PartNumber: TAD-0040_MAIN
Wide Application: These Tools Work Perfectly To Correct Or Create Internal And External Threading Through Wood, Copper, Aluminum, Iron, Carbon Steel, And More!.
Blow-Molded Case: The Blow-Molded Case Stores And Organizes The Tools, Providing Easy Portability Wherever You Need Them.
Chromium Steel: The Whole Tool Set Is Constructed With Gcr15 Bearing Steel Heat Treated For Durable And Corrosion-Free Performance With Satisfying Longevity.
User-Friendly Design: Our Sae Tap And Die Set Is Engineered To Tight Tolerances To Meet Professional Needs; The Tap Ends Are 1/5 To 2/5 In. Long To Allow Easier Use With The Provided Wrenches.
Features
- SAE TAP & DIE SET: These 34 Orion Motor Tech taps and dies cut and clean internal and external threads in common conventional sizes; the set also includes a long-handled tap wrench, 2 T-handle tap wrenches, an adjustable die wrench, a 1/8" flathead screwdriver, and a thread pitch gauge to cover all your needs
- USER-FRIENDLY DESIGN: Our SAE tap and die set is engineered to tight tolerances to meet professional needs; the tap ends are 1/5 to 2/5 in. long to allow easier use with the provided wrenches
- WIDE APPLICATION: These tools work perfectly to correct or create internal and external threading through wood, copper, aluminum, iron, carbon steel, and more!
- CHROMIUM STEEL: The whole tool set is constructed with GCr15 bearing steel heat treated for durable and corrosion-free performance with satisfying longevity
- BLOW-MOLDED CASE: The blow-molded case stores and organizes the tools, providing easy portability wherever you need them
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
See On Amazon #3
Orion Motor Tech 60 PCS Tap and Die Set Metric and Standard Sizes Included Tap Die Kit Metric and SAE for Threading and Rethreading Internal and External Threads
Asin: B082S89P7S
Wide Application: These Threading Tools Work Perfectly To Correct Or Create Internal And External Threading Through Wood, Copper, Aluminum, Iron, Carbon Steel, And More!.
Blow-Molded Case: The Blow-Molded Case Stores And Organizes The Tools, Providing Easy Portability Wherever You Need Them To Thread And Rethread Internal And External Threads.
Chromium Steel: The Thread Repair Set Is Constructed With Gcr15 Bearing Steel Heat Treated For Durable And Corrosion-Free Performance With Satisfying Longevity.
User-Friendly Design: Our Standard And Metric Tap Die Set Is Engineered To Tight Tolerances To Meet Professional Needs; The Tap Ends Are 5-10Mm Long To Allow Easier Use With The Provided Wrenches.
Features
- SAE & METRIC TAP & DIE SET: These 54 Orion Motor Tech taps and dies cut and clean internal and external threads in common conventional and metric sizes; the set also includes adjustable tap and die wrenches, a T-handle tap wrench, a 1/8" flathead screwdriver, and a thread pitch gauge to cover all your needs
- USER-FRIENDLY DESIGN: Our standard and metric tap die set is engineered to tight tolerances to meet professional needs; the tap ends are 5-10mm long to allow easier use with the provided wrenches
- WIDE APPLICATION: These threading tools work perfectly to correct or create internal and external threading through wood, copper, aluminum, iron, carbon steel, and more!
- CHROMIUM STEEL: The thread repair set is constructed with GCr15 bearing steel heat treated for durable and corrosion-free performance with satisfying longevity
- BLOW-MOLDED CASE: The blow-molded case stores and organizes the tools, providing easy portability wherever you need them to thread and rethread internal and external threads
- See more on Amazon...
Brand: Orion Motor Tech | Manufacturer: Orion Motor Tech
See On Amazon #4
WYNNsky Die and Tap Set in SAE and Metric, Hex Threading Dies for External Threads, Thread Tap for Internal Threads, Thread Wrench, Thread Pitch Gauge, 86 Pieces Gauge Kit for DIY Tapered
Asin: B09YLWBMWR | Model: TH1075A | PartNumber: TH1075A
Thread Pitch Gauge: Thread Pitch Gauges Are Used As A Reference Tool In Determining The Pitch Of A Thread That Is On A Screw Or In A Tapped Hole. This Tool Is Not Used As A Precision Measuring Instrument, Rather It Allows The User To Determine The Profile Of The Given Thread And Quickly Categorize The Thread By Shape And Pitch..
Material: Taps And Dies Are Used To Cut Metals And Are Typically Made Of High-Speed Steel Or Hardened Carbon Steel, With The Former Is Much More Robust And Used For A Broader Range Of Material. These Cutting Materials Are Suitable For Threading Steel, Cast Steel, Cast Iron, Non-Ferrous Metals, Plastics, Softwood, And Hardwood..
T Handle Tap Wrench: T Handles Hold The End Of A Tap To Provide Extra Leverage For Hand Tapping Making Them Very Useful For Confined Spaces Or Where Extra Reach Or Leverage Is Required. T Handle Tap Wrenches May Also Be Used With Screw Extractors, Drills, And Other Tools..
Application: Taps And Dies Are Metal Threading Tools Used To Cut And Restore Internal And External Threads Precisely. A Tap Is Used To Form The Female Component Of The Assembly, As In The Case Of A Nut Or Socket, A Die Is Used On The Male Component, As In A Screw Or Bolt. In Other Words, A Tap Is Used To Create The Internal Threads In A Hole For Use With A Threaded Fastener And A Die Is Used To Make Or Repair External Threading On A Round Rod, Screw, Or Bolt..
Features
- Threading Dies and Tap Size: Metric Size M3 0.5, M4 0.7, M5 0.8, M6 1.0, M7 1.0, M8 1.0, M8 1.25, M9 1.25, M10 1.25, M10 1.5, M11 1.25, M11 1.5, M12 1.5, M12 1.75, M14 1.5, M14 2.0, M16 1.5, M16 2.0; SAE Size #4-40 NC, #6-32 NC, #8-32 NC, #10-32 NC, #10-24 NC, #12-24NC, 1/4-28 NF, 1/4-20 NF, 1/8-27 NPT, 5/16-24 NF, 5/16-18 NF, 5/8-18 NF, 3/8-24 NF, 3/8-16 NF, 7/16-20 NF, 7/16-14 NF, 1/2-20 NF, 1/2-13 NF, 5/8-11 NF, 9/16-18 NF, 9/16-12 NF.
- Application: Taps and dies are metal threading tools used to cut and restore internal and external threads precisely. A tap is used to form the female component of the assembly, as in the case of a nut or socket, a die is used on the male component, as in a screw or bolt. In other words, a Tap is used to create the internal threads in a hole for use with a threaded fastener and a die is used to make or repair external threading on a round rod, screw, or bolt.
- Thread Pitch Gauge: Thread pitch gauges are used as a reference tool in determining the pitch of a thread that is on a screw or in a tapped hole. This tool is not used as a precision measuring instrument, rather it allows the user to determine the profile of the given thread and quickly categorize the thread by shape and pitch.
- T Handle Tap Wrench: T Handles hold the end of a tap to provide extra leverage for hand tapping making them very useful for confined spaces or where extra reach or leverage is required. T Handle Tap wrenches may also be used with screw extractors, drills, and other tools.
- Material: Taps and dies are used to cut metals and are typically made of high-speed steel or hardened carbon steel, with the former is much more robust and used for a broader range of material. These cutting materials are suitable for threading steel, cast steel, cast iron, non-ferrous metals, plastics, softwood, and hardwood.
- See more on Amazon...
Brand: WYNNsky | Manufacturer: WYNNsky
Dimensions: 2.00 x 15.00 x 10.00 Inches
See On Amazon #5
EilxMag 110PCS Tap and Die Set, Metric Tap and Die Rethreading Kit, Thread Chaser Set for Cutting External and Internal Threads,Metric Size M3 to M16 with Storage Case (Pakage)
Asin: B095K5PFQB | Model: E-Kit-110SZ | PartNumber: E-Kit-110SZ | Ean: 0789336832027 | UPC: 789336832027
【Tap And Die Set Size】: 𝟏𝟏𝟎 𝐏𝐂𝐒 Rethreading Kit:M2 X 0.4, M3 X 0.5, M4 X 0.7, M5 X 0.8, M6 X 0.75, M6 X 1, M7 X 0.75, M7 X 1, M8 X 0.75, M8 X 1, M8 X 1.25, M9 X 0.75, M9 X 1, M9 X 1.25, M10 X 0.75, M10 X 1, M10 X 1.25, M10 X 1.5, M11 X 0.75, M11 X 1, M11 X 1.25, M11 X 1.5, M12 X 0.75, M12 X 1, M12 X 1.25, M12 X 1.5, M12 X 1.75, M14 X 1, M14 X 1.25, M14 X 1.5, M14 X 2, M16 X 1, M16 X 1.5, M16 X 2, M18 X 1.5.
【Wide Applications & Quality Guarantee】: The Tap And Die Set Is Suitable For The Repair Of New Threads Or Damaged Threads On Most Metals Such As Carbon Steel, Cast Iron, Aluminum, Brass, Copper And Stainless Steel. We Promise One Year Warranty, If You Encounter Problems Can Contact Us At Any Time..
【Easy To Use】: Constructed From Hardened Alloy Steel For Maximum Strength, Durability And Longevity. Heavy-Duty Plastic Blow-Molded Carrying Case For Easy Transport, Safe Storage & Quick Organization. Tapered Teeth Design To Start Threading Easily And Smoothly And Prevent Overthreading..
【Package Includes】: 35 Taper Taps + 35 Plug Taps + 35 Dies + 2 Tap Wrench M3-M12,M6-M20 + 1 Die Holder 25Mm,38Mm O/D + 1 T-Type Tap Wrench M3-M6..
Features
- Construction Material : This set of metric tap and die set is made of steel material. Steel is the base metal used in the construction of these sets but not all steel is created equally! Look for steel alloy or, even better, Titanium tipped cutting surfaces. The better the metal the tougher the tap and die so they so they can cut into more materials and they will stay sharper for longer.
- Package Includes : 35 Taper Taps + 35 Plug Taps + 35 Dies + 2 Tap Wrench M3-M12,M6-M20 + 1 Die Holder 25mm,38mm O/D + 1 T-Type Tap Wrench M3-M6.
- Tap and die set size : Rethreading Kit:M2 x 0.4, M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 0.75, M6 x 1, M7 x 0.75, M7 x 1, M8 x 0.75, M8 x 1, M8 x 1.25, M9 x 0.75, M9 x 1, M9 x 1.25, M10 x 0.75, M10 x 1, M10 x 1.25, M10 x 1.5, M11 x 0.75, M11 x 1, M11 x 1.25, M11 x 1.5, M12 x 0.75, M12 x 1, M12 x 1.25, M12 x 1.5, M12 x 1.75, M14 x 1, M14 x 1.25, M14 x 1.5, M14 x 2, M16 x 1, M16 x 1.5, M16 x 2, M18 x 1.5
- Easy to USE : Constructed from hardened alloy steel for maximum strength, durability and longevity. Heavy-duty plastic blow-molded carrying case for easy transport, safe storage & quick organization. Tapered teeth design to start threading easily and smoothly and prevent overthreading.
- Wide applications & Quality guarantee : The tap and die set is suitable for the repair of new threads or damaged threads on most metals such as carbon steel, cast iron, aluminum, brass, copper and stainless steel. We promise one year warranty, if you encounter problems can contact us at any time.
- See more on Amazon...
Brand: EilxMag | Manufacturer: EilxMag
See On Amazon #6
KPKL 60 PC Tap and Die Set titanium layer - Include SAE Inch Size #4 to 1/2 and Metric Size M3 to M12, Coarse and Fine Threads | Essential Threading Rethreading Tool Kit
Asin: B0CCMT9QRB | Model: KPKLSX01 | PartNumber: KPKLSX01
☆More Features And Conical Tooth Design ： Perfect To Create New Threads Or Repair Damaged Threads On Most Metals Like Carbon Steel, Cast Iron, Aluminum, Brass, Copper And Stainless Steel; Taps (For Internal Threads) And Dies (For External Threads) Feature With Tapered Teeth That Start Threading More Easily..
☆Components Included In The 60Pc Tap Die Set - Comes With (1) Adjustable Tap Handle; (1) T-Type Small Tap Handle; (1) Adjustable Die Handle; (2) Thread Pitch Gauges; (1) Slotted Screwdriver; (1) Storage And Carry Case.
☆Wide Range Of Applications - Set Includes (20) Metric Taps And Dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75; (20) Sae Fractional Taps And Dies For Coarse Thread (Unc): 4-40 Nc, 6-32 Nc, 8-32 Nc, 10-24 Nc, 12-24 Nc, 1/4-20 Nc, 5/16-18 Nc, 3/8-16 Nc, 7/16-14 Nc, 1/2-13 Nc; (12) Sae Fractional Taps And Dies For Fine Thread (Unf): 10-32 Nf, 1/4-28 Nf, 5/16-24 Nf, 3/8-24 Nf, 7/16-20 Nf, 1/2-20 Nf; (2) Npt Tap And Die: 1/8-27 Npt..
☆ Excellent Cuttability ： All Cutting Teeth Are Precisely Cnc Machined And Accurately Heat Treated To Rockwell Hardness 60 Hrc For Best Threading Performance..
Features
- Better materials and quality :Industrial grade GCr15 bearing steel construction ensures durability and tool longevity to withstand professional uses Titanium coating on the surface protects against moisture and rust, ensuring a longer service life.
- Excellent cuttability All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance.
- More features and conical tooth design Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel; Taps (for internal threads) and Dies (for external threads) feature with tapered teeth that start threading more easily.
- Wide range of applications - Set includes (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75; (20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12-24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC; (12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF; (2) NPT tap and die: 1/8-27 NPT.
- Components included in the 60PC tap die set - Comes with (1) Adjustable Tap Handle; (1) T-type Small Tap Handle; (1) Adjustable Die Handle; (2) Thread Pitch Gauges; (1) Slotted Screwdriver; (1) Storage and Carry Case
- See more on Amazon...
Brand: KPKL | Manufacturer: KPKL
See On Amazon #7
DURATECH Large Size Tap and Die Set, 23 Piece, Standard, Rethreading Kit for Internal and External Threads & Screw Extractor for Spiral Screws, Organized in Storage Tray
Asin: B0B24TGRWM | Ean: 0820909692621 | UPC: 820909692621
Remove Broken Screws:This Rethreading Kit Comes With Carbon Steel Screw Extractor, Which Is Designed To Remove Broken Studs, Bolts, Socket Screws And Fittings..
Complete Set Include:1Tap Wrench,1 Die Wrench,7 Tap(9/16-12,5/8-11,3/4-10Nc；9/16-18,5/8-18,3/4-16Nf;1/4-18Npt),9 Die(1/2-13,9/16-12,5/8-11,3/4-10Nc;1/2-20,9/16-18,5/8-18,3/4-16Nf; 1/4-18Npt)，5 Screw Extractor(1#(5/64), 2#(7/64),3#(5/32),4#(1/4),5#(17/64))..
Storage Case: Comes With Blow Molded Case For Safe Keeping And Makes For Great Transport Between Job Locations..
Wide Application:Create New Threads Or Repair Damaged Threads On Most Metals Like Carbon Steel, Cast Iron, Aluminum, Brass, Copper, And Stainless Steel With This Tap And Die Kit.Tip:For Every Full Turn Forward, Make Sure Turn The Tap One Half Back To Prevent The Tap From Damaging. Add Proper Lubricant During Thread Cutting Operation..
Features
- Large Size Tap & Die Set: Industrial grade GCr15 bearing steel heat treated for corrosion-free performance with satisfying longevity.The thread repair set has coarse (NC) fine (NF) and national pipe (NPT) thread designations, ensuring usability in many hand threading applications.
- Wide Application:Create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper, and stainless steel with this tap and die kit.Tip:For every full turn forward, make sure turn the tap one half back to prevent the tap from damaging. Add proper lubricant during thread cutting operation.
- Remove Broken Screws:This rethreading kit comes with carbon steel screw extractor, which is designed to remove broken studs, bolts, socket screws and fittings.
- Storage Case: Comes with blow molded case for safe keeping and makes for great transport between job locations.
- Complete Set Include:1tap wrench,1 die wrench,7 tap(9/16-12,5/8-11,3/4-10NC 9/16-18,5/8-18,3/4-16NF;1/4-18NPT),9 die(1/2-13,9/16-12,5/8-11,3/4-10NC;1/2-20,9/16-18,5/8-18,3/4-16NF; 1/4-18NPT) 5 screw extractor(1#(5/64), 2#(7/64),3#(5/32),4#(1/4),5#(17/64)).
- See more on Amazon...
Brand: DURATECH | Manufacturer: Hangzhou Great Star Industrial Co.,LTD.
See On Amazon #8
Anfrere 60pcs SAE & Metric Tap and Die Set, Metric Standard Rethreading Tool Kit, Coarse and Fine Threads for Cutting External and Internal Threads, Essential Repair Tool Kit with Storage Case
Asin: B0C393CFLD | Model: TDK-IM60SL | PartNumber: TDK-IM60SL
Long-Lasting Material -- Constructed From Industrial Grade Hardened Gcr15 Bearing Steel For Maximum Strength And Longevity. Suitable For Cutting Steel, Copper, Aluminum, Cast Iron, And Other Materials..
All-In-One Set -- Comes With Thread Gauge, Tap Handle, Die Handle, Small Tap Chuck, And A Carrying Case For Your Convenience. Easy To Assemble And Operate..
Efficient And Precise -- All Cutting Teeth Are Precisely Cnc Machined And Accurately Heat Treated To Reach Hardness 60 Hrc For Best Threading Performance..
Features
- RETHREADING SET -- Professional standard and metric tap die rethread tool kit for cutting or updating of internal and external threads on fasteners or fastener holes. The taps can also be used to remove broken screws.
- EFFICIENT AND PRECISE -- All cutting teeth are precisely CNC machined and accurately heat treated to reach hardness 60 HRC for best threading performance.
- LONG-LASTING MATERIAL -- Constructed from industrial grade hardened GCr15 bearing steel for maximum strength and longevity. Suitable for cutting steel, copper, aluminum, cast iron, and other materials.
- ALL-IN-ONE SET -- Comes with thread gauge, tap handle, die handle, small tap chuck, and a carrying case for your convenience. Easy to assemble and operate.
- See more on Amazon...
Brand: Anfrere | Manufacturer: Anfrere
Dimensions: 1.57 x 16.54 x 9.06 inches | Weight: 4.30 pounds
See On Amazon #9
Muzerdo 115PCS Sae and Metric Bearing Steel Tap and Die Rethreading Kit with Metal Box
Asin: B08JKC85GK | Model: LS-003 | PartNumber: LS-003
Construction Material – Steel Is The Base Metal Used In The Construction Of These Sets – But Not All Steel Is Created Equally! Look For Steel Alloy Or, Even Better, Titanium Tipped Cutting Surfaces. The Better The Metal The Tougher The Tap And Die So They So They Can Cut Into More.
Metal Storage Case – More Than With Many Other Types Of Tools, The Storage Case Is An Important Part Of The Tap And Die Set. Frankly, Because These Sets Can Come With Multiple Parts, You Do Want A Case That Is Well Designed To Keep All The Little Pieces Well Organized And Safely Stored..
Metric/Sae – The Size Of The Tap And Die Is Also Important. Metric Is Of Course The European Measurement System, Sae Are Based On Us Sizes (So Use Inches Instead Of Millimeters). This Is Important As You May Struggle To Use A Sae Tap And Die Set On A Vehicle With Metric Measurements. If The Car Is Made In The Us, It Probably Uses Sae Measurements. If It Is A European Carmaker, It’S Probably The Opposite. If Can Look For A Set With Dual Metric And Sae Compatibility Of Course Then You Don’T Have T.
Wrenches – All Tap And Die Bits Need To Be Mounted In A Wrench. Broadly Speaking, They Are All Roughly The Same, With A Few Notable Exceptions. The Tap Wrench From Muzerdo, Is The Best On The Market..
Features
- Tap and Die Bit Diversity These tools are sold as a set for good reason. You really should look to get as much diversity in the sizes of the taps and dies as you can. That way you will be able to pull the right size out of the box when you need it.
- Wrenches All tap and die bits need to be mounted in a wrench. Broadly speaking, they are all roughly the same, with a few notable exceptions. The tap wrench from Muzerdo, is the best on the market.
- Construction Material Steel is the base metal used in the construction of these sets but not all steel is created equally! Look for steel alloy or, even better, Titanium tipped cutting surfaces. The better the metal the tougher the tap and die so they so they can cut into more
- Metric/SAE The size of the tap and die is also important. Metric is of course the European measurement system, SAE are based on US sizes (so use inches instead of millimeters). This is important as you may struggle to use a SAE tap and die set on a vehicle with metric measurements. If the car is made in the US, it probably uses SAE measurements. If it is a European carmaker, it s probably the opposite. If can look for a set with dual Metric and SAE compatibility of course then you don t have t
- Metal Storage Case More than with many other types of tools, the storage case is an important part of the tap and die set. Frankly, because these sets can come with multiple parts, you do want a case that is well designed to keep all the little pieces well organized and safely stored.
- See more on Amazon...
Brand: Muzerdo | Manufacturer: LS
See On Amazon #10
uxcell Round Die Stock Handle Wrench Set, 5/16-18 UNC Threading Die and 25mm Die Holder (Fits: 16mm-25mm OD Die / M7-M8 Thread Die) Adjustable for Bolt Thread Repair
Asin: B093FB5PMG
Features: The Die Holder Provides Good Wear Resistance For Long Service Life. With 4 Adjustable Screws, The Die Stock Can Securely Hold Round Dies And Is Easy To Operate. The Alloy Tool Steel Die Is Not Loose For Conical Locking Hole And Strong Locking, With Hardness, High Torque, Good Toughness And Wear-Resistance..
Tips: It Needs To Be Reversed Every 1/4~1/2 Turn To Facilitate The Chip Discharge From The Chip Hole. Suitable Lubricating Oil Should Be Added To The Cutting Edge Of The Die When Tapping The Thread. The Bar Diameter Should Be Smaller ( About 0.05Mm-0.15Mm) Than The Nominal Diameter Of The Required Thread..
Easy To Use: The Positioning Groove Of The Die Should Be Aligned With The Fastening Screw In The Middle Of The Die Wrench, And The Screw Should Be Inserted Into The Slot Of The Die And Tightened.The Die Surface Is Lubricated With Grease To Prevent Rust..
Application: The Die Handle Wrench Set Can Help To Process, Correct, Clean Male Threads, Or Repair Damaged Bolts And Threads, Or Just Remove Bolts And Threaded Rod. Great For Re-Threading Existing Threads In Hard Materials Like Metal, Or Making New Threads In Soft Material Like Plastic..
Features
- Die & Wrench Set: Die Wrench: 25mm x 9mm die stock fits 16mm-25mm outside diameter die / M7-M8 thread die, with 5 adjustable screws Round Die: 5/16-18 UNC threading die with 25mm outside diameter. Die stock, also called die handle or die wrench, are use in round dies only.
- Application: The die handle wrench set can help to process, correct, clean male threads, or repair damaged bolts and threads, or just remove bolts and threaded rod. Great for re-threading existing threads in hard materials like metal, or making new threads in soft material like plastic.
- Features: The die holder provides good wear resistance for long service life. With 4 adjustable screws, the die stock can securely hold round dies and is easy to operate. The alloy tool steel die is not loose for conical locking hole and strong locking, with hardness, high torque, good toughness and wear-resistance.
- Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened.The die surface is lubricated with grease to prevent rust.
- Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping the thread. The bar diameter should be smaller ( about 0.05mm-0.15mm) than the nominal diameter of the required thread.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Weight: 0.00 pounds
See On Amazon #11
11 Piece UNC Hex Die Set 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 3/4" 7/8" 1" Rethreading Carbon Steel Black Box with Handle
Asin: B09QL5T1LG | Model: szh-unc-set11 | PartNumber: szh-unc-set11 | Ean: 0784624637414 | UPC: 784624637414
1/4"-20 5/16"-18 3/8"-16 7/16"-14 1/2"-13 9/16"-12 5/8"-11 3/4"-10 7/8"-9 1"-8.
Include A Screw Gauge.
Features
- Made of Carton Steel
- Include a Screw Gauge
- 1/4-20 5/16-18 3/8-16 7/16-14 1/2-13 9/16-12 5/8-11 3/4-10 7/8-9 1-8
- See more on Amazon...
Brand: Kaimex | Manufacturer: Kaimex
See On Amazon #12
Thread Chaser Set Metric and Standard 49PCS Rethreading Tool Kit Automotive UNC UNF Metric Thread Repair Kit Bolt Thread Cleaner Tool Thread Chaser Kit SAE and Metric Thread Files Set Tap and Die Set
Asin: B0CJBZ6C4B | Model: AQ-27 | PartNumber: AQ-27
【22Pcs Rethreading Taps And 24Pcs Rethreading Dies】The Thread Repair Kits Include The Most Common Unc, Unf And Metric Sizes. Unc (Silver): 5/8”-11, 9/16”-12, 1/2”-13, 7/16”-14, 3/8”-16, 5/16”-18, 1/4 ”-20; Unf (Black): 5/8”-18, 9/16”-18, 1/2”-20, 7/16”-20, 3/8”-24, 5/16”-24 , 1/4”-28; Metric (Gold): M14x1.5, M12x1.75, M12x1.5, M12x1.25, M11x1.5, M10x1.5, M10x1.25, M10x1.0, M8x1.25, M6x1 .0..
【Thickened Case & 3-Year Warranty】Our Blow Molded Case Is Made Of Specially Thickened Material, Which Is Not Easy To Break And Helps You Keep All Your Thread Repair Tools Organized. We Provide A 36-Month Free Warranty And 24-Hour Friendly Customer Service To Ensure Your Shopping Experience. If You Have Any Questions About This Rethreading Tool Kit, Please Feel Free To Contact Us And We Will Provide You With A Satisfactory Solution As Soon As Possible..
【3Pcs Thread Files】Sae Thread File: 9 - 10 - 12 - 16 - 20 - 27 - 28 - 32; Sae Thread File: 11 - 12 - 13 - 14 - 16 - 18 - 20 - 24; Metric Thread File: 0.75Mm - 1.0Mm - 1.25Mm - 1.50Mm - 1.75Mm - 2.00Mm - 3.00Mm; The Thread Files Comes With Removable Plastic Caps To Cover The Cutting Edge When Held In The Hand To Prevent Stepping On Fingers..
【High Hardness & Wide Compatibility & Easy To Identify】(1) The Tool Is Made Of High-Quality Carbon Steel Material, Which Has High Hardness And Good Wear Resistance, And The Surface Is Oxidized So That It Is Not Easy To Rust. (2) Can Be Used With A Wrench Or Socket, Using A Long Extension With A Socket Allows You To Clear Threads In Tight Or Hard-To-Reach Locations. (3) The Chart On The Cover Provides A Quick Reference Guide To Dimensions, And Taps And Dies Are Color-Coded For Easy Identification..
Features
- Upgraded 49PCS Thread Chaser Set This thread chaser set is designed to clean worn, rusted and damaged threads, especially corroded threads on aluminum and steel parts, cleaning internal and external threads without destroying metal integrity. The 49pcs thread repair kit includes 24pcs dies, 12pcs taps and 3pcs thread files, perfect for DIY repairmen and machinists.
- High Hardness & Wide Compatibility & Easy To Identify (1) The tool is made of high-quality carbon steel material, which has high hardness and good wear resistance, and the surface is oxidized so that it is not easy to rust. (2) Can be used with a wrench or socket, using a long extension with a socket allows you to clear threads in tight or hard-to-reach locations. (3) The chart on the cover provides a quick reference guide to dimensions, and taps and dies are color-coded for easy identification.
- 22PCS Rethreading Taps and 24PCS Rethreading Dies The thread repair kits include the most common UNC, UNF and metric sizes. UNC (Silver): 5/8 -11, 9/16 -12, 1/2 -13, 7/16 -14, 3/8 -16, 5/16 -18, 1/4 -20; UNF (black): 5/8 -18, 9/16 -18, 1/2 -20, 7/16 -20, 3/8 -24, 5/16 -24 , 1/4 -28; Metric (gold): M14x1.5, M12x1.75, M12x1.5, M12x1.25, M11x1.5, M10x1.5, M10x1.25, M10x1.0, M8x1.25, M6x1 .0.
- 3PCS Thread Files SAE Thread File: 9 - 10 - 12 - 16 - 20 - 27 - 28 - 32; SAE Thread File: 11 - 12 - 13 - 14 - 16 - 18 - 20 - 24; Metric Thread File: 0.75mm - 1.0mm - 1.25mm - 1.50mm - 1.75mm - 2.00mm - 3.00mm; The thread files comes with removable plastic caps to cover the cutting edge when held in the hand to prevent stepping on fingers.
- Thickened Case & 3-Year Warranty Our blow molded case is made of specially thickened material, which is not easy to break and helps you keep all your thread repair tools organized. We provide a 36-month free warranty and 24-hour friendly customer service to ensure your shopping experience. If you have any questions about this rethreading tool kit, please feel free to contact us and we will provide you with a satisfactory solution as soon as possible.
- See more on Amazon...
Brand: CMTOOL | Manufacturer: CMTOOL
Warranty: 3 year
See On Amazon #13
VKALTUL 42PCS Thread Chaser Set, Rethreading Kit Includes 21 rethreading Dies 19 rethreading taps and 2 SAE Rethread Files, Thread Restorer Kit with Metric, UNF and UNC Sizes
Asin: B0B5854JY4 | Model: 49PCS | PartNumber: 49PCS
【Multi Size Thread Restorer Kit】The Dies Included Are Unc(Silver): 1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14, 1/2"-13, 9/16"-12, 5/8"-11；Unf (Black): 1/4"-28, 5/16"-24, 3/8"-24, 7/16"-20, 1/2"-20, 9/16"-18, 5/8"-18 And Metric (Gold): M6x1.00, M8x1.25, M10x1.25, M10x1.50, M12x1.25, M12x1.50, M12x1.75.The 19 Rethreading Taps Included Are Unc: 1/4"X20, 5/16"X18, 3/8"X16, 7/16"X14, 1/2"X13, 9/16"X12；Unf: 1/4"X28, 5/16"X24, 3/8"X24, 7/16"X20, 1/2"X20, 9/16"X18 And Metric: M6x1.00, M8x1.25, M10x1.25, M10x1.50, M12x1.25, M12x1.50, M12x1.75. The Thread Files Are Sae: 9,10,12,16,20,27,28,32 And 11,12,13,14,16,18,20,24..
【Easy To Use】The Dies And Taps Of This Metric Thread Chaser Kit Have Three Colors, Silver Corresponds To Unc Size, Black Corresponds To Unf Size, And Gold Corresponds To Metric Size, Each Of Them Is Marked With Corresponding Specifications, Which Is Easy To Find When Using. Besides, The Corresponding Model Is Marked Next To Each Groove On The Box, Which Can Be Put Back After Each Use To Facilitate The Next Use..
【Easy To Store Thread Restorer Kit】All Thread Repair Tools Are Safely And Orderly Stored In The Blow Molding Box, Which Can Withstand High-Strength Extrusion Without Deformation And Protect The Product From Damage. The Groove In The Box Can Prevent Thread Repair Tools From Moving Freely And Effectively Prevent Wear..
【High Quality】Made Of The Highest Quality Carbon Steel Materials, Individual Pieces Are Highly Tempered, With Strong Strength And Maximum Durability.This Rethreading Kit Includes 21 Rethreading Dies，19 Rethreading Taps And 2 Sae Rethreading Files.The Dies And Taps Pieces Are Hex Shaped To Use With A Wrench Or Socket.The Thread Files Come With A Removable Plastic Sleeve To Cover The Cutting Edges That Are Held In The Hand To Prevent Scratching The Fingers..
Features
- Professional Thread Repair Tool VKALTUL 42pcs thread chaser set has measurements in UNC (Unified National Coarse) UNF (Unified National Fine) and Metric. It is very suitable for creating new threads or repairing damaged threads on most metals such as cast iron, steel, aluminum and copper. It can easily help you repair damaged external and internal threads on nuts, bolts and studs.
- High Quality Made of the highest quality carbon steel materials, individual pieces are highly tempered, with strong strength and maximum durability.This rethreading kit includes 21 rethreading dies 19 rethreading taps and 2 SAE rethreading files.The dies and taps pieces are hex shaped to use with a wrench or socket.The thread files come with a removable plastic sleeve to cover the cutting edges that are held in the hand to prevent scratching the fingers.
- Multi Size Thread Restorer Kit The dies included are UNC(silver): 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13, 9/16-12, 5/8-11 UNF (black): 1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20, 9/16-18, 5/8-18 and metric (gold): M6x1.00, M8x1.25, M10x1.25, M10x1.50, M12x1.25, M12x1.50, M12x1.75.The 19 rethreading taps included are UNC: 1/4x20, 5/16x18, 3/8x16, 7/16x14, 1/2x13, 9/16x12 UNF: 1/4x28, 5/16x24, 3/8x24, 7/16x20, 1/2x20, 9/16x18 and metric: M6x1.00, M8x1.25, M10x1.25, M10x1.50, M12x1.25, M12x1.50, M12x1.75. The thread files are SAE: 9,10,12,16,20,27,28,32 and 11,12,13,14,16,18,20,24.
- Easy to Store Thread Restorer Kit All thread repair tools are safely and orderly stored in the blow molding box, which can withstand high-strength extrusion without deformation and protect the product from damage. The groove in the box can prevent thread repair tools from moving freely and effectively prevent wear.
- Easy to Use The dies and taps of this metric thread chaser kit have three colors, silver corresponds to UNC size, black corresponds to UNF size, and gold corresponds to metric size, each of them is marked with corresponding specifications, which is easy to find when using. Besides, the corresponding model is marked next to each groove on the box, which can be put back after each use to facilitate the next use.
- See more on Amazon...
Brand: VKALTUL | Manufacturer: VKALTUL
Dimensions: 2.36 x 11.81 x 9.45 inches
Warranty: 3 years warranty
See On Amazon #14
Thread Chaser Set 48Pcs Thread Repair Kit,UNC/UNF/Metric Thread Restoring Files Tap and Die Kit,with 24 Rethreading Dies,22 Rethreading Taps,2 SAE Thread Files Thread Restorer,for Most Metals
Asin: B0C54WPSHL | Model: NO | PartNumber: NO
【24Pcs Hexagonal Die】The 24Pcs Mold Is Designed In A Hexagonal Shape,Which Can Be Used With A Wrench Or Socket To Easily Repair Damaged Threads. Unc Sizes (7 Pieces): 1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14, 1/2"-13, 9/16"-12, 5 /8"-11; Unf Sizes (7 Pieces): 1/4"-28, 5/16"-24, 3/8"-24, 7/16"-20, 1/2"-20, 9/ 16"-18, 5/8"-18; Metric Sizes (10 Pieces): M6x1.0, M8x1.25, M10x1.0 M10x1.25, M10x1.5, M11x1.5, M12x1.25, M12x1.5, M12x1.75, M14x1.5..
【Equipped With Thickened Blow Molded Box & Easy To Store/Carry】Metric Thread Chaser Set Is Equipped With A High-Quality Heavy-Duty Plastic Suitcase, Which Can Be Neatly And Orderly Placed In The Box After Each Use To Prevent Loss And Extrusion. It Is Not Only Convenient To Store, But Also More Portable Convenient. In Addition, The Groove Design Is Adopted In The Box, Which Can Prevent The Wear And Tear Caused By The Mutual Collision Between The Tools And Prolong The Service Life Of The Tools..
【22Pcs Tap Set & 2Pcs Thread File】22Pcs Tap Set Made Of High-Quality Carbon Steel Material,Full Grinding Process,Good Wear Resistance,And Can Effectively Clean Threads. Unc Sizes: 1/4"X20, 5/16"X18, 3/8"X16, 7/16"X14, 1/2"X13,9/16"X12; Unf Sizes: 1/4"X28, 5/16"X24, 3/8"X24, 7/16"X20,1/2"X20,9/16"X18; Metric Size: M6x1.0, M8x1.25, M10x1.0, M10x1.25, M10x1.5, M11x1.5, M12x1.25, M12x1.5, M12x1.75, M14x1.5. 2Pcs Thread Files Are Sae Sizes: 11,12,13,14,16,18,20,24; Sae Sizes: 9,10,12,16,20,27,28,32..
【Colour Coded Identification & Superior Materials】The 48-Piece Thread Chaser Uses Three Colour Distinctions For Unc (Black),Unf (Silver) And Metric (Gold) Sizes To Provide You With Quick Visual Identification.And Each Notch Is Marked With The Corresponding Model Number Next To It To Help You Quickly Select The Correct Repair Tool.All Parts Of The Thread Restorer Are Made From High Quality Carbon Steel And Are Highly Tempered For Strength And Durability..
Features
- Thread Repair Kit For Professional Cleaning & Repair Of Internal/External Threads Thread chaser set contains UNC (Unified National Coarse), UNF (Unified National Fine) and metric sizes, professionally used to repair or renew damaged internal and external threads on nut bolts or studs, effectively cleaning rust and dirt from threads,repairing worn threads and restoring clear thread lines, suitable for most metals such as cast iron, steel, aluminium and copper.
- Colour Coded Identification & Superior Materials The 48-piece thread chaser uses three colour distinctions for UNC (black),UNF (silver) and metric (gold) sizes to provide you with quick visual identification.And each notch is marked with the corresponding model number next to it to help you quickly select the correct repair tool.All parts of the thread restorer are made from high quality carbon steel and are highly tempered for strength and durability.
- 24PCS Hexagonal Die The 24PCS mold is designed in a hexagonal shape,which can be used with a wrench or socket to easily repair damaged threads. UNC Sizes (7 pieces): 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13, 9/16-12, 5 /8-11; UNF sizes (7 pieces): 1/4-28, 5/16-24, 3/8-24, 7/16-20, 1/2-20, 9/ 16-18, 5/8-18; Metric sizes (10 pieces): M6x1.0, M8x1.25, M10x1.0 M10x1.25, M10x1.5, M11x1.5, M12x1.25, M12x1.5, M12x1.75, M14x1.5.
- 22pcs Tap Set & 2Pcs Thread File 22pcs tap set made of high-quality carbon steel material,full grinding process,good wear resistance,and can effectively clean threads. UNC Sizes: 1/4x20, 5/16x18, 3/8x16, 7/16x14, 1/2x13,9/16x12; UNF Sizes: 1/4x28, 5/16x24, 3/8x24, 7/16x20,1/2x20,9/16x18; Metric size: M6x1.0, M8x1.25, M10x1.0, M10x1.25, M10x1.5, M11x1.5, M12x1.25, M12x1.5, M12x1.75, M14x1.5. 2PCS thread files are SAE sizes: 11,12,13,14,16,18,20,24; SAE sizes: 9,10,12,16,20,27,28,32.
- Equipped With Thickened Blow Molded Box & Easy To Store/Carry Metric thread chaser set is equipped with a high-quality heavy-duty plastic suitcase, which can be neatly and orderly placed in the box after each use to prevent loss and extrusion. It is not only convenient to store, but also more portable convenient. In addition, the groove design is adopted in the box, which can prevent the wear and tear caused by the mutual collision between the tools and prolong the service life of the tools.
- See more on Amazon...
Brand: DUOYI | Manufacturer: DUOYI
See On Amazon #15
ATOPLEE 5pcs Metric Left Hand Thread Die Set M3X0.5mm M4X0.7mm M5X0.8mm M6X1.0mm M8X1.25mm
Asin: B017GR31W8 | Ean: 0601308130262 | UPC: 601308130262
{Specifications}M3*0.5/M4*0.7/M5*0.8/M6*1.0/M8*1.25..
{Usage}Suitable For Moldel Machining Steel, Cast Iron, Copper, Aluminum, Zinc, Etc.Die Can Be Installed In Die Wrench Using Manual Processing Threads Can Also Be Mounted On The Die Holder On The Machine To Use..
{Package Included} 5 X Metric Thread Die..
{Size}In Diameter * Inside Diameter:3Mmx0.5Mm,4Mmx0.7Mm,5Mmx0.8Mm,6Mmx1.0Mm,8Mmx1.25Mm..
Features
- {Material} Made of alloy tool steel,hardness and durable.
- {Size}In diameter * inside diameter:3mmX0.5mm,4mmX0.7mm,5mmX0.8mm,6mmX1.0mm,8mmX1.25mm.
- {Specifications}M3*0.5/M4*0.7/M5*0.8/M6*1.0/M8*1.25.
- {Package Included} 5 x Metric Thread Die.
- {Usage}Suitable for moldel machining steel, cast iron, copper, aluminum, zinc, etc.Die can be installed in die wrench using manual processing threads can also be mounted on the die holder on the machine to use.
- See more on Amazon...
Brand: ATOPLEE | Manufacturer: ATOPLEE
See On Amazon #16
ABN Metric and SAE Standard Tap and Die 60-Piece Rethread Set Rethreading Kit for Cutting External and Internal Threads
Asin: B076DMLX5J | Model: 8766 | PartNumber: 8766 | Ean: 0688295878766 | UPC: 688295878766
Built To Last: Constructed From Hardened Alloy Steel For Maximum Strength And Longevity; Can Cut Materials Such As Cast Iron, Steel, Aluminum, Copper.
Contents: Package Includes Coarse And Fine Threads Numbered Taps And Dies From #4-40 To #12-24 And Fractional Taps And Dies From 1/4"-28 To 1/2"-20, 1/8"-27 Npt Tap And Die, Metric Tap And Dies From M3x0.5 To M12x1.75, Thread Gauge, Tap Handle, Die Handle, Small Tap Chuck, And A Carrying Case For Your Convenience.
Easy Storage: Heavy-Duty Plastic Blow-Molded Carrying Case For Easy Transportation, Safe Storage, And Quick Organization.
Sizes: Metric Taps 3X0.5, 4X0.7, 5X0.8, 6X1.0, 7X1.0, 8X1.25, 9X1.25, 10X1.0, 10X1.5, 12X1.75; Unc Taps 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2; Unf Taps 10-32, 1/4, 5/16, 3/8, 7/16, 1/2; Metric Dies 3X0.5, 4X0.7, 5X0.8, 6X1.0, 7X1.0, 8X1.25, 9X1.25, 10X1.0, 10X1.5, 12X1.75; Unc Dies 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2; Unf Dies 10-32, 1/4, 5/16, 3/8, 7/16, 1/2; Npt Tap 1/8-27; Npt Die 1/8-27; Tap Wrench M4-M12 3/16-1/2”; T-Type Tap Wrench M3-M16 1/16-1/4”.
Features
- CUT AND RENEW THREADS: The ABN Metric and SAE Standard Tap and Die 60-Piece Rethread Set Rethreading Kit for Cutting External and Internal Threads is a comprehensive set for cutting and renewing external and internal threads to exact standards
- SIZES: Metric taps 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75; UNC taps 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2; UNF taps 10-32, 1/4, 5/16, 3/8, 7/16, 1/2; Metric dies 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75; UNC dies 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2; UNF dies 10-32, 1/4, 5/16, 3/8, 7/16, 1/2; NPT tap 1/8-27; NPT die 1/8-27; Tap wrench M4-M12 3/16-1/2 ; T-type tap wrench M3-M16 1/16-1/4
- BUILT TO LAST: Constructed from hardened alloy steel for maximum strength and longevity; Can cut materials such as cast iron, steel, aluminum, copper
- EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization
- CONTENTS: Package includes coarse and fine threads numbered taps and dies from #4-40 to #12-24 and fractional taps and dies from 1/4-28 to 1/2-20, 1/8-27 NPT tap and die, metric tap and dies from M3x0.5 to M12x1.75, thread gauge, tap handle, die handle, small tap chuck, and a carrying case for your convenience
- See more on Amazon...
Brand: ABN | Manufacturer: ABN
Dimensions: 1.80 x 16.50 x 9.00 inches | Weight: 4.34 Pounds
Warranty: This product has a manufacturer warranty against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase. See our Seller Return Policy for more details.
See On Amazon #17
Muzerdo 131PCS Sae and Metric Coated Bearing Steel Tap and Die Rethreading Kit
Asin: B08WRC71DT
Our Tap And Die Set Consists Of Taps, Dies, And Drill Bits Of Different Sizes For Various Applications. Included In The Set Are Handles For Turning. The Collection Also Consists Of Screw Extractors And Charts To Determine The Correct Drill And Taps To Match The Thread Size And Pitch. Some Sets May Contain Twist-Lock Guides, Coarse And Fine Taps, And Other Tools At A Higher Cost..
Known For Their Ability To Start Easily, These Taps And Dies Are The Most Commonly Used Style And Are Perfect For Most Hand Threading Applications.
Instead Of Other Kits Which Are Made Of Low Carbon Steel, Our Kit Are Made Of *** Bearing Steel*** Which Are More Stronger, Good Abrasion Performance. An Overall Chromium Coating Improves The Corrosion Resistance Of The Generally Used Through-Hardening Bearing Steel. These Cutting Materials Are Suitable For Threading Steel, Cast Steel, Cast Iron, Non-Ferrous Metals, Plastics, Softwood, And Hardwood..
A Tap Is A Threaded Tool That Cuts Or Forms Threads In The Female Portion Of A Mating Pair. Therefore, A Tap Will Create Threads In The Inside Of A Hole. On The Other Hand, A Die Is A Threaded Tool That Cuts Or Forms Threads In The Male Portion Of A Mating Pair. Therefore, A Die Will Create Threads On A Cylindrical Rod's Surface To Create A Screw Or Bolt. Both A Tap And A Die Create New Threads Or Repair Damaged Threads..
Features
- Muzerdo tap and die set is one of those toolboxes that are not immediately intuitive to have but become essential to your work once you have it. It does not matter if you are a mechanic, a craftsman, a metal or woodworker, or even a DIY enthusiast, a tap and die set would be remarkably useful to you. Taps and dies are cutting tools used to create threads on components such as screws, bolts, nuts and to create a threaded hole to screw components into.
- A tap is a threaded tool that cuts or forms threads in the female portion of a mating pair. Therefore, a tap will create threads in the inside of a hole. On the other hand, a die is a threaded tool that cuts or forms threads in the male portion of a mating pair. Therefore, a die will create threads on a cylindrical rod's surface to create a screw or bolt. Both a tap and a die create new threads or repair damaged threads.
- Our tap and die set consists of taps, dies, and drill bits of different sizes for various applications. Included in the set are handles for turning. The collection also consists of screw extractors and charts to determine the correct drill and taps to match the thread size and pitch. Some sets may contain twist-lock guides, coarse and fine taps, and other tools at a higher cost.
- Instead of other kits which are made of low carbon steel, our kit are made of *** bearing steel*** which are more stronger, good abrasion performance. An overall chromium coating improves the corrosion resistance of the generally used through-hardening bearing steel. These cutting materials are suitable for threading steel, cast steel, cast iron, non-ferrous metals, plastics, softwood, and hardwood.
- Known for their ability to start easily, these taps and dies are the most commonly used style and are perfect for most hand threading applications
- See more on Amazon...
Brand: Muzerdo | Manufacturer: LS
See On Amazon #18
60 Piece Metric and SAE Standard Tap and Die Rethread Set Coarse and Fine Threads Rethreading Kit for Cutting External and Internal Threads Amazing Tour
Asin: B07ZVHLSJQ | Ean: 0755320156615 | UPC: 755320156615
Brand: Amazing Tour | Manufacturer: Amazing Tour
See On Amazon #19
HHIP 1017-0016 16 Piece 1/4-3/4" Hexagon Rethreading Die Set
Asin: B0742N46MJ | Model: 1017-0016 | PartNumber: 1017-0016 | Ean: 0769053087238 | UPC: 769053087238
Supplied With Fitted Metal Case.
16 Piece Set Includes One Each Of A 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20, 9/16-12, 9/16-18, 5/8-11, 5/8-18, 3/4-10 And 3/4-16 Die.
Right Hand.
Features
- Made of carbon steel
- Right hand
- Supplied with fitted metal case
- 16 piece set includes one each of a 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20, 9/16-12, 9/16-18, 5/8-11, 5/8-18, 3/4-10 and 3/4-16 die
- See more on Amazon...
First Available: 07/19/2017
Brand: HHIP | Manufacturer: ABS Import Tools Inc.
Dimensions: 10.00 x 10.00 x 6.00 inches
See On Amazon #20
Alfa Tools MHD70755 5Mmx0-80 Rethreading Hex Die Carbon Steel
Asin: B00DYFO6S0 | Model: MHD70755 | PartNumber: MHD70755 | Ean: 0721511553457 | UPC: 721511553457
19/32-Inch Across Flats, 1/4-Inch Thickness.
Quantity: 1 Per Pack.
Carbon Steel, Right Hand.
6-Millimeter By 1.00 Thread Size.
Features
- Rethreading hexagon Die metric
- 6-millimeter by 1.00 thread size
- 19/32-inch across flats, 1/4-inch thickness
- Carbon steel, right hand
- Quantity: 1 per pack
- See more on Amazon...
Brand: Alfa Tools | Manufacturer: Alfa Tools
Dimensions: 0.25 x 0.59 x 0.59 inches
See On Amazon
Looking For Something Else?
Search