6.0 IPR Valve with ICP Control Sensor and Pigtail | Replacement for 2003-2010 F250 F350 F450 F550 E450 Super Duty Excursion, 04-10 E350 E450 | REPLACE# CM-5126, 1846057C1, 4C3Z-9F838-A, 1845428C91
Asin: B0BNPT7GGW
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【High Durability】Long Life-Span Matters, That Is Why Our 6.0 Powerstroke Ipr Valve Comes With Precision-Manufactured 6.0L Injection Control Pressure (Icp) Sensor And Pigtail To Provide Long Operating Life And Excellent Performance.
【Replace#】5C3z9c968ca, 5C3z-9C968-Ca, 1846057C1, Cm-5126, 4C3z-9F838-A, 4C3z9f838a, 1845428C91, 1845428C92. Robust Diaphragm Materials Design For Greater Resistance To Leakage, Improved Durability And Compatibility With A Wide Range Of Fuels.
【24-Month Warranty】If For Any Reason At All, You Are Not Fully Satisfied With The Fuel Injector Pressure Regulator Valve, Simply Contact Us Through Amazon Message To Apply The Service Of Carefree Replacement Or Refund.
【Fits】Ford Powerstroke 6.0L Vehicles, 2003-2010 Ford F-250 F-350 F-450 F-550 Super Duty Excursion, 2004-2010 Ford E-350 E-450. Since This 6.0L Powerstroke Ipr Valve Is A Direct Replacement For Your Factory 6.0L Ipr Valve, Operation Is Quiet And Without Noise Of Regulator.
【Premium Quality】Precisely Manufactured Internal Valves, Diaphragms And Springs Means You Will Get A Fairly Reliable Powerstroke Valve To Perform Excellently Under All Engine Operating Conditions, Properly Control The Pressure In The High-Pressure Oil System.
Features
- OEM FIT If you are experiencing no-start, erratically idling or jerking, then you may have a problem with your IPR valve. This valve sensor has undergone a rigorous testing to ensure proper operating parameters to factory specification, exactly OEM design to replace your defective IPR valve
- PREMIUM QUALITY Precisely manufactured internal valves, diaphragms and springs means you will get a fairly reliable powerstroke valve to perform excellently under all engine operating conditions, properly control the pressure in the high-pressure oil system
- HIGH DURABILITY Long life-span matters, that is why our 6.0 powerstroke ipr valve comes with precision-manufactured 6.0l injection control pressure (ICP) sensor and pigtail to provide long operating life and excellent performance
- FITS Ford Powerstroke 6.0L Vehicles, 2003-2010 Ford F-250 F-350 F-450 F-550 Super Duty Excursion, 2004-2010 Ford E-350 E-450. Since this 6.0l powerstroke ipr valve is a direct replacement for your factory 6.0l IPR valve, operation is quiet and without noise of regulator
- REPLACE# 5C3Z9C968CA, 5C3Z-9C968-CA, 1846057C1, CM-5126, 4C3Z-9F838-A, 4C3Z9F838A, 1845428C91, 1845428C92. Robust diaphragm materials design for greater resistance to leakage, improved durability and compatibility with a wide range of fuels
- 24-MONTH WARRANTY If for any reason at all, you are not fully satisfied with the fuel injector pressure regulator valve, simply contact us through amazon message to apply the service of carefree REPLACEMENT or REFUND
- See more on Amazon...
Brand: ATRACYPART | Manufacturer: ATRACYPART
See On Amazon Similar To 6.0 IPR Valve with ICP
#1
IPR Valve 6.0 Powerstroke Injector Pressure Regulator ICP Control Sensor for 2003-2010 Ford Super Duty F250 F350 F450 F550 E350 E450 Excursion 6.0L Diesel Turbocharged CM5126 AP63417 5C3Z9C968CA
Asin: B0BY413L56 | Model: 5C3Z9C968CA | PartNumber: 5C3Z9C968CA | Ean: 0747749037699 | UPC: 747749037699
【High Durability】Long Life-Span Matters, That Is Why Our 6.0 Powerstroke Ipr Valve And 6.0 Powerstroke Icp Sensor Come With Precision-Manufactured 6.0L Injection Control Pressure (Icp) Sensor And Pigtail To Provide Long Operating Life And Excellent Performance.
【24-Month Warranty】This 6.0L Powerstroke Ipr Valve Is A Direct Replacement For Your Factory 6.0L Ipr Valve, Operation Is Quiet And Without Noise Of Regulator, If For Any Reason At All, You Are Not Fully Satisfied With The Fuel Injector Pressure Regulator Valve, Simply Contact Us Through Amazon Message To Apply The Service Of Carefree Replacement Or Refund.
【Oem Fit】If You Are Experiencing No-Start, Erratically Idling Or Jerking, Then You May Have A Problem With Your Ipr Valve. This Valve Sensor Has Undergone A Rigorous Testing To Ensure Proper Operating Parameters To Factory Specification, Exactly Oem Design To Replace Your Defective Ipr Valve.
【Replace Part #】5C3z9c968ca, 5C3z-9C968-Ca, 1846057C1, Cm-5126, 4C3z-9F838-A, 4C3z9f838a, 1845428C91, 1845428C92, Ap63417, Htv102, W3250216, Replacement For Ford 6.0 Ipr Valve & Ford 6.0 Icp Sensor.
Features
- FITMENT For Ford Powerstroke 6.0L V8 Diesel Turbocharged Vehicles I Compatible with 2003-2010 Ford Super Duty F-250 F-350 F-450 F-550, 2004-2010 Ford E-350 E-450 Excursion.
- REPLACE PART # 5C3Z9C968CA, 5C3Z-9C968-CA, 1846057C1, CM-5126, 4C3Z-9F838-A, 4C3Z9F838A, 1845428C91, 1845428C92, AP63417, HTV102, W3250216, Replacement for Ford 6.0 IPR Valve & Ford 6.0 ICP Sensor
- HIGH DURABILITY Long life-span matters, that is why Our 6.0 powerstroke IPR valve and 6.0 powerstroke ICP sensor come with precision-manufactured 6.0l injection control pressure (ICP) sensor and pigtail to provide long operating life and excellent performance
- OEM FIT If you are experiencing no-start, erratically idling or jerking, then you may have a problem with your IPR valve. This valve sensor has undergone a rigorous testing to ensure proper operating parameters to factory specification, exactly OEM design to replace your defective IPR valve
- 24-MONTH WARRANTY This 6.0l powerstroke ipr valve is a direct replacement for your factory 6.0l IPR valve, operation is quiet and without noise of regulator, If for any reason at all, you are not fully satisfied with the fuel injector pressure regulator valve, simply contact us through amazon message to apply the service of carefree REPLACEMENT or REFUND
- See more on Amazon...
Brand: liriuda | Manufacturer: liriuda auto parts
Dimensions: 2.90 x 5.50 x 0.90 inches
See On Amazon #2
Mekar 6.0 IPR Valve Socket and Oil Rail Adapters Kits and 6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool with Seal Kit Compatible with 6.0L Powerstroke Diesel Engine
Asin: B09WMDH7KK | Ean: 0790885145506 | UPC: 790885145506
【6.0 Ipr Valve Air Test Accessory Tool】– Equipped With 1/4" Pipe Threads To Accommodate Standard Air Fittings. It Replaces The Ipr Valve And Keeps The System Completely Sealed To Avoid Any Possible Leakage..
【Satisfaction Guarantee】– Any Other Problem About The Product, Please Feel Free To Contact Us. If You Are Not Satisified With The Item, Please Feel Free To Return It Back And We Will Refund Full Back To You. If The Item Has Defect, Please Contact Us, We Take All The Responsibility And Reissue It For Free Without Hesitation..
【Oil Rail Adapters】– Essential Tools Connected To The Fuel Rail To Test For Leaks. It Allows To Observe The Injector Control Pressure (Icp) Of The High-Pressure Oil System Through Direct Instrument Connection, And Helps To Test The Leakage Of The High-Pressure Oil System Using Workshop Air..
【Premium Material】– Made Of Top Quality Solid Steel Or Brass, It Has Excellent Mechanical And Physical Properties, Smooth Surface, Durable Corrosion Resistance, And Has Been Repeatedly Tested And Gradually Optimized To Ensure Its Excellent Performance And Long Service Life..
Features
- Perfect Fitment Compatible with Excursion 6.0L V8 Diesel Turbocharged 2003-2010; Compatible with E-350/E-450 6.0L V8 Diesel Turbocharged 2004-2010; Compatible with F-250/F-350/F-450/F-550 Super Duty 6.0L V8 Diesel Turbocharged 2003-2010.
- Premium Material Made of top quality solid steel or brass, it has excellent mechanical and physical properties, smooth surface, durable corrosion resistance, and has been repeatedly tested and gradually optimized to ensure its excellent performance and long service life.
- 6.0 IPR Valve Air Test Accessory Tool Equipped with 1/4 pipe threads to accommodate standard air fittings. It replaces the IPR valve and keeps the system completely sealed to avoid any possible leakage.
- Oil Rail Adapters Essential tools connected to the fuel rail to test for leaks. It allows to observe the injector control pressure (ICP) of the high-pressure oil system through direct instrument connection, and helps to test the leakage of the high-pressure oil system using workshop air.
- Satisfaction Guarantee Any other problem about the product, please feel free to contact us. If you are not satisified with the item, please feel free to return it back and we will refund full back to you. If the item has defect, please contact us, we take all the responsibility and reissue it for free without hesitation.
- See more on Amazon...
Brand: Mekar | Manufacturer: Mekar
See On Amazon #3
Injector Pressure Regulator Valve Socket Removal Tool and Seal Kit 6.0 IPR Valve Socket with Seal Kit Compatible with 2003-2010 Ford 6.0L Powerstroke Excursion F250 F350 F450 F550 E350 E450
Asin: B074CSFQ2W | Model: ER39601+3 | PartNumber: ER39601+3 | Ean: 6113229397203
☸ The Ipr Valve In Your Powerstroke Is Responsible For Controlling The Pressure For The High-Pressure Oil System.The Ipr Commands The High Pressure Oil Pump That Fires The Injectors.
☸ After-Sales Service:We Are A Professional Team,If You Have Any Questions About Our Ipr Valve Socket With Seal Kit,Please Feel Free To Contact Us,We Are Very So Honored To Serve For You,And We Will Answer Your Doubts In The First Time.No Need To Worry About It..
☸ The Ipr (Injection Pressure Regulator) Is Located On The High Pressure Oil Pump.The Ipr Valve O-Rings Are A Common Failure Point.
☸ Compatible With 2003-2010 Ford International 6.0L Powerstroke Diesel Engines.Oem Number:3C3z9h529a , Ap0035.
Features
- High Quality: High quality machined from steel or rubber with excellent mechanical and physical properties, this Socket shows its high tightness, corrosion resistance and durability
- Compatible With 2003-2010 Ford International 6.0L Powerstroke Diesel Engines.OEM Number:3C3Z9H529A , AP0035
- The IPR Valve In Your Powerstroke Is Responsible For Controlling The Pressure For The High-Pressure Oil System.The IPR Commands The High Pressure Oil Pump That Fires The Injectors
- The IPR (Injection Pressure Regulator) Is Located On The High Pressure Oil Pump.The IPR Valve O-Rings Are A Common Failure Point
- After-Sales Service:We are a professional team,If you have any questions about our IPR Valve Socket with Seal Kit,please feel free to contact us,we are very so honored to serve for you,and we will answer your doubts in the first time.No need to worry about it.
- See more on Amazon...
Brand: BLACKHORSE-RACING | Manufacturer: blackhorseracing
See On Amazon #4
AUTOKAY Powerstroke 6.0 ICP Sensor 1845428C92 4C3Z-9F838 for 2004-2007 Ford
Asin: B014GX94KI | Ean: 0707242723604 | UPC: 707242723604
Brand: AUTOKAY
See On Amazon #5
Saihisday ICP EBP Repair Connector Harness Pigtail 3 Way 5C3Z12224A, 904-222 Replacement for Ford F250 F350 F450 F550 Super Duty 6.0L 7.3L Diesel Powerstroke
Asin: B07MZQW1XZ | Model: 5C3Z12224A, 904-222 | PartNumber: 5C3Z12224A, 904-222
√ Replacement For 1994 - 2003 7.3L Icp And Ebp Sensors All Models; Replacement For 2003 - 2007 6.0L Icp And Ebp Sensors F Series Trucks.
√ Built To Strict Quality Control Standards, 1 Year Warranty, Hassle-Free Return And Money Back Policy, Buy With Confidence!.
√ Replacement For 2003 - 2010 6.0L Icp And Ebp Sensors E Series; Replacement For 2007 - 2010 6.4L Ebp Sensor; Replacement For 2010 - 2015 6.7L Ebp Sensors.
√ Replace # S-619, 904-222, 5C3z12224a, Ap0021.
Features
- Condition: Brand new and high quality, well packed
- Replace # S-619, 904-222, 5C3Z12224A, AP0021
- Replacement for 1994 - 2003 7.3L ICP and EBP sensors all models; Replacement for 2003 - 2007 6.0L ICP and EBP sensors F series trucks
- Replacement for 2003 - 2010 6.0L ICP and EBP sensors E series; Replacement for 2007 - 2010 6.4L EBP sensor; Replacement for 2010 - 2015 6.7L EBP sensors
- Built to strict quality control standards, 1 year warranty, hassle-free return and money back policy, buy with confidence!
- See more on Amazon...
Brand: Saihisday | Manufacturer: Saihisday
See On Amazon #6
6.0 IPR Valve Socket with Seal Kit Compatible with Ford 6.0L Powerstroke-Excursion E-350, F-250 F-350 Super Duty-Replaces 904-415, 3C3Z9H529A, 3C3Z-9H529-A Injector Pressure Regulator Valve Socket
Asin: B0B1CVNSP2 | Ean: 0790885145681 | UPC: 790885145681
【Material】: Made Of High Quality Steel And Durable Rubber With Excellent Mechanical And Physical Properties Including, Corrosion Resistance, Durability, High Sealing..
【Package Include】: 1Pc Ipr Valve Socket Tool; 1Pc Screen Mesh Filter; 3Pcs O-Rings. ------ Enjoy One Year Free Warranty Service. Any Other Problem About The Product, Please Feel Free To Contact Us..
【Kindly Note】: The Ipr (Injection Pressure Regulator) Is At The High Pressure Oil Pump. O-Rings On Ipr Valves Are A Common Point Of Failure. If Your Car Difficult To Start, Which Might Mean That Your Ipr Valve Screen And Seal Need To Be Replaced..
【Replacement】: Replace Number Of 904-415, 3C3z-9H529-A, 3C3z9h529a, 904415 Commonly Used On 2004-2010 Popular Models Compatible With Diesel Powerstroke 6.0 Engine.
Features
- Fitment : Compatible for Ford Vehicles 2003 - 2005 Excursion; 2003 - 2007 F250 F350 F450 F550 Super Duty; 2004-2007 F650 F750; 2004 - 2005 E350 Club Wagon; 2004 - 2010 E350 E450 Super Duty
- Replacement : Replace Number of 904-415, 3C3Z-9H529-A, 3C3Z9H529A, 904415 Commonly used on 2004-2010 popular models compatible with Diesel Powerstroke 6.0 engine
- Material : Made of high quality steel and durable rubber with excellent mechanical and physical properties including, corrosion resistance, durability, high sealing.
- Kindly Note : The IPR (Injection Pressure Regulator) is at the high pressure oil pump. O-rings on IPR valves are a common point of failure. If your car difficult to start, which might mean that your IPR valve screen and seal need to be replaced.
- Package Include : 1pc IPR Valve Socket Tool; 1pc Screen Mesh Filter; 3pcs O-rings. ------ Enjoy one year free warranty service. Any other problem about the product, please feel free to contact us.
- See more on Amazon...
Brand: PEATOVIE | Manufacturer: Mekar
See On Amazon #7
E-cowlboy 6.0L for Powerstroke Fuel Pressure Test Fitting Adapter for 2003-2010 Ford Diesel Engine(with Schrader Valve)
Asin: B07ZVR9PVY | Model: JS600 | PartNumber: JS600 | Ean: 7427046750332
Excellent Function - Low Fuel Pressure Is One Cause Of Premature 6.0L Injector Failure. This Fitting Not Only Makes Checking Fuel Pressure Easily, But Also Boost Fuel Pressure And Increase Injector Life..
100% Satisfaction Guarantee - If You're Not 100% Satisfied With E-Cowlboy Fitting, Simply Return It For A Full Refund In 30 Days. Premium Support & 12-Month Warranty.
Superior Material - Cnc Machined From High Quality Brass Material Which Has Excellent Mechanical And Physical Properties, Ensure A Perfect Fit With Exact Tolerances For Problem-Free Performance And Long Term Service..
1/4" Schrader Connection - This Fitting Has An Oem 1/4 Inch Schrader Connection Which Is The Most Common Connection Size For Almost Any Fuel Pressure Test Kit..
Features
- FITMENT - Fit perfectly on 2003 2004 2005 2006 2007 2008 2009 2010 Ford 6.0L diesel engine.
- 1/4 SCHRADER CONNECTION - This fitting has an OEM 1/4 inch Schrader connection which is the most common connection size for almost any fuel pressure test kit.
- EXCELLENT FUNCTION - Low fuel pressure is one cause of premature 6.0L injector failure. This fitting not only makes checking fuel pressure easily, but also boost fuel pressure and increase injector life.
- SUPERIOR MATERIAL - CNC Machined from high quality Brass material which has excellent mechanical and physical properties, ensure a perfect fit with exact tolerances for problem-free performance and long term service.
- 100% SATISFACTION GUARANTEE - If you're not 100% satisfied with E-cowlboy Fitting, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty
- See more on Amazon...
Brand: E-cowlboy | Manufacturer: E-cowlboy
See On Amazon #8
2 Wire Pigtail Connector Turbo VGT Solenoid & IPR Pigtail valves for 6.0l Ford Powerstroke & Chevy GMC Duramax 6.6L
Asin: B082B2YRQL | Ean: 8414799943066
If You Receive A Substandard Or Damaged Product, Please Contact Us In Time, We Will Handle It For You Immediately..
Any Questions You Have, Please Don't Hesitate To Contact Us. We Will Get You Back Soon.
Package Comes With 1Pc Fuel Injector Connector Wiring Harness.
Fits For Ford Power Stroke, Navistar, And Gm Duramax Engines.
Features
- Fits For Variable Geometry Turbo (VGT) Solenoid, Injection Pressure Regulator (IPR) Valves, Heui A/B Injectors, Valve Cover Gasket Repair Harness
- Fits For Ford Power Stroke, Navistar, And GM Duramax Engines
- If you receive a substandard or damaged product, please contact us in time, we will handle it for you immediately.
- Package comes with 1pc Fuel Injector Connector Wiring Harness
- Any questions you have, please don't hesitate to contact us. We will get you back soon
- See more on Amazon...
Brand: U3store | Manufacturer: U3store
See On Amazon #9
Bonbo 6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool & Oil Rail Adapters Leak Test Kit, Fits for Ford 6.0L Powerstroke Diesel Engine (3 Pack)
Asin: B087TVC3LW | Ean: 7427046757508
【Oil Rail Adapters】 Used To Connect To The Oil Rail For Leakage Test. It Allows Observation Of The High Pressure Oil System's Injector Control Pressure (Icp) By Direct Gauge Connection, And Facilitates Testing Of The High Pressure Oil System For Leaks By Using Shop Air..
【Satisfaction Guarantee】 If You're Not Satisfied With The Product, Simply Return It For A Full Refund In 30 Days Or Get A Replacement During 1 Year Warranty Via Our Customer Service. If Your Item Is Defective, Incorrect, Arrived Damaged Or Any Other Problems, Please Contact Us (Include Pictures If Possible) And We Will Reply In 24 Hours..
【Expertly Made & Superior Quality】 Machined From Premium Steel Or Brass While Anodized With Slick Finish On Surface. Higher Strength, Better Corrosion Resistance And Impact Resistance. Provide You With Long-Lasting Reliable Service..
【6.0 Ipr Valve Air Test Fitting Tool】 This Tool Is Equipped With 1/4 Inch Pipe Threads To Accept Standard Air Fittings. It Takes Place Of The Ipr Valve And Keep The System Completely Sealed, Which Will Effectively Avoid Any Possible Leakage..
Features
- Great Compatibility Compatible with Ford E-350, E-450 6.0L V8 Diesel Turbocharged 2004-2010. Fits for Ford F-250, F-350, F-450, F-550 Super Duty 6.0L V8 Diesel Turbocharged 2003-2010. Also fits for Ford Excursion 6.0L V8 Diesel Turbocharged 2003-2010.
- 6.0 IPR Valve Air Test Fitting Tool This tool is equipped with 1/4 inch pipe threads to accept standard air fittings. It takes place of the IPR valve and keep the system completely sealed, which will effectively avoid any possible leakage.
- Oil Rail Adapters Used to connect to the oil rail for leakage test. It allows observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitates testing of the High Pressure Oil System for leaks by using shop air.
- Expertly Made & Superior Quality Machined from premium steel or brass while anodized with slick finish on surface. Higher strength, better corrosion resistance and impact resistance. Provide you with long-lasting reliable service.
- Satisfaction Guarantee If you're not satisfied with the product, simply return it for a full refund in 30 days or get a replacement during 1 year warranty via our customer service. If your item is defective, incorrect, arrived damaged or any other problems, please contact us (include pictures if possible) and we will reply in 24 hours.
- See more on Amazon...
Brand: Bonbo | Manufacturer: Bonbo
See On Amazon #10
7.3 IPR Valve Injector Pressure Regulator & ICP Sensor 7.3 Powerstroke with Pigtail Compatible for Ford F250 F350 F450 F550 / Super Duty E350 E450 E550 / Excursion F650 F750 NO# F81Z9C968AA 1841217C91
Asin: B09Q62J23Z | Model: F81Z9C968AA | PartNumber: F81Z9C968AA | Ean: 0761594412333 | UPC: 761594412333
Installation: Easy To Weld And Install, The Ipr (Injection Pressure Regulator) Is Located On The Back Of The High Pressure Oil Pump Which Is Located Under The Fuel Filter Assembly.
Service: Before Purchasing This Product, Verify The Model You Purchased. If You Have Any Questions, You Can Contact Us By Email To Ensure You A Truly Worry-Free Shopping Experience.
Packge Include: 7.3 Powerstroke Ipr Valve Fuel Injection Pressure Regulator + Icp Control Sensor + Pigtail Connector Kit, This Have Passed Undergoes Stringent Testing To Ensure High Quality, Durable And Reliable Under Extreme Conditions..
Fitment: For E-350 Econoline 1995-1998, E-350 Econoline Club Wagon 1995-2002, E-350 Super Duty 1999-2003, E-450 Econoline Super Duty 2000-2002, E-450 Super Duty 2003, Econoline Super Duty 1996-1999, Excursion 2000-2003, F Super Duty 1994-1997, F150 1996, Hd 1997, F-450/F-550 Super Duty 1999-2003..
Features
- Replace Part Number: ICP Sensor 7.3 Powerstroke Replace Part Number: F81A9C968AA, F81Z9C968AB, AP63402, F81Z9C968AA, F81Z9C968AB, F81Z-9C968-AB, F5TZ9C968A, 1841217C91, 1829856C91, 1836412C91, 1841086C91, CM5013, CM-5013, PR315, PR1315
- Fitment: For E-350 Econoline 1995-1998, E-350 Econoline Club Wagon 1995-2002, E-350 Super Duty 1999-2003, E-450 Econoline Super Duty 2000-2002, E-450 Super Duty 2003, Econoline Super Duty 1996-1999, Excursion 2000-2003, F Super Duty 1994-1997, F150 1996, HD 1997, F-450/F-550 Super Duty 1999-2003.
- Installation: Easy to Weld and Install, the IPR (Injection Pressure Regulator) is Located on the Back of the High Pressure Oil Pump which is Located Under the Fuel Filter Assembly
- Packge include: 7.3 powerstroke IPR valve fuel injection pressure regulator + ICP control sensor + pigtail connector kit, this have passed undergoes stringent testing to ensure high quality, durable and reliable under extreme conditions.
- Service: Before Purchasing this Product, Verify the Model You Purchased. If You have any Questions, You can Contact us by Email to Ensure You a Truly Worry-free Shopping Experience
- See more on Amazon...
Brand: XIAORENWU | Manufacturer: loreadaautoparts
See On Amazon #11
Sunluway 6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool, High Pressure Oil Rail Adapters Leak Test Kit and 6.0 IPR Valve Socket with Seal Kit Fit for Ford 6.0L Powerstroke Diesel Engine
Asin: B0827PL122 | Ean: 7427046755177
Oil Rail Adapters: Both Brass Adapters Use Standard 1/4" Npt Air Hose Connection, Which Allow Observation Of The High Pressure Oil System's Injector Control Pressure (Icp) By Direct Gauge Connection, And Facilitate Testing Of The High Pressure Oil System For Leaks Using Shop Air.
6.0 Ipr Valve Socket With Seal Kit: Use With 3/8" Square Drive, 12 Point Design Socket Can Tightly Locate Your Ipr Valve In A Very Tight Location, Also Built To Bottom Out On The Hex So It Does Not Put Torque On The Connector In Case It Can Be Reused (Include Ipr Valve Seal Kit Oe Number 3C3z9h529a, Ap0035).
Ipr Valve Air Test Fitting : This Tool Has 1/4 Inch Pipe Threads To Accept Standard Air Fittings; It Takes The Place Of The Ipr Valve Meaning That The System Can Be Completely Sealed So That Even The Smallest Leaks Can Be Detected.
High Quality: High Quality Machined From Brass Or Steel With Excellent Mechanical And Physical Properties, These Tool Kit Show Their High Tightness, Corrosion Resistance And Durability.
Features
- Fitment: IPR Valve Air Test Fitting and Oil Rail Adapters perfectly fit for Ford 6.0L powerstroke diesel high pressure oil system; 6.0 IPR Valve Socket compatible with Ford 6.0L and other diesel engines, and Seal Kit fits for 2003-2010 Ford 6.0L V8 Diesel Turbocharged Modles
- High Quality: High Quality Machined from Brass or Steel with excellent mechanical and physical properties, these tool kit show their high tightness, corrosion resistance and durability
- Oil Rail Adapters: Both brass adapters use standard 1/4 NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air
- IPR Valve Air Test Fitting : This tool has 1/4 inch pipe threads to accept standard air fittings; It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected
- 6.0 IPR Valve Socket with Seal Kit: Use with 3/8 square drive, 12 point design socket can tightly locate your IPR valve in a very tight location, also built to bottom out on the hex so it does not put torque on the connector in case it can be reused (Include IPR Valve Seal Kit OE Number 3C3Z9H529A, AP0035)
- See more on Amazon...
Brand: Sunluway | Manufacturer: Sunluway
See On Amazon #12
Big-Autoparts Injector Pressure Regulator Seal Kit Compatible With Ford 6.0L Powerstroke Diesel IPR Seal Screen Kit 2003-2010
Asin: B071FFB7TS | Model: DD-9H529-A DD9H529A | PartNumber: DD-9H529-A DD9H529A | Ean: 0682698035931 | UPC: 682698035931
Injector Seal Kit 6.0 Are Easy To Install,Please Press On With Some Strength And No Split Off After That,It Performs As Well As Ford Original Repair Kit..
Each Injector Pressure Regulator Kit Are 100% Brand New And Have Two Year Warranty.External Diameter Of Ipr Valve Size Is 17.40Mm,Inner Diameter Size Is 15.07Mm.Best For Replace The Stock Injector Seal..
Injector Seal Kit Package Includes With Backup Ring,Orifice O-Ring,O-Ring Seal&Ipr Valve Screen..
Injector Regulator Kit Compatible With Manufacturer Part Number Dd-9H529-A/Dd9h529a-Ipr Screen Kit,Interchange Part Number:Sk-107/Sk107/3C3z-9H529-A/3C3z9h529a,Alliant Power P/N-Ap0035..
Features
- Injector Pressure Seal Kit Compatible With 2003-2010 Ford & International 6.0L Powerstroke Diesel Engines DD-9H529-6.0.
- Injector regulator kit compatible with manufacturer part number DD-9H529-A/DD9H529A-IPR SCREEN KIT,Interchange Part Number:SK-107/SK107/3C3Z-9H529-A/3C3Z9H529A,ALLIANT POWER P/N-AP0035.
- Injector seal kit 6.0 are easy to install,please press on with some strength and no split off after that,it performs as well as ford original repair kit.
- Injector seal kit package includes with Backup Ring,Orifice O-Ring,O-Ring Seal&IPR Valve Screen.
- Each injector pressure regulator kit are 100% brand new and have two year warranty.External diameter of IPR valve size is 17.40mm,inner diameter size is 15.07mm.Best for replace the stock injector seal.
- See more on Amazon...
Brand: big-autoparts | Manufacturer: Big-Autoparts
See On Amazon #13
QISF 6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool + Oil Rail Adapters Leak Test Kit for 6.0L Powerstroke Diesel Engine (3Pcs/Set)
Asin: B08CDVVXKP | Ean: 0707112084200 | UPC: 707112084200
【Oil Rail Adapters】-- Essential For Connecting To The Oil Rail To Test For Leaks.Standard 1/4" Npt Air Hose Connection, Which Allow Observation Of The High Pressure Oil System's Injector Control Pressure (Icp) By Direct Gauge Connection, And Facilitate Testing Of The High Pressure Oil System For Leaks Using Shop Air..
【Package】-- 2Pcs Oil Rail Adapters + 1Pcs 6.0 Ipr Valve Air Test Fitting Tool.
【Material】-- Adpater Made Of Brass; 6.0 Ipr Valve Air Test Tool Made Of High Strength Steel And Zinc Plated For Rust Prevention..
【6.0 Ipr Valve Air Test Fitting Tool】-- Equipped With 1/4" Pipe Threads To Accept Standard Air Fittings.Simply Remove The Ipr Valve And You Can Completely Seal The High Pressure Oil System To Find All Of The Leaks..
Features
- Function -- Perfectly work on 6.0L powerstroke diesel high pressure oil system.
- 6.0 IPR Valve Air Test Fitting Tool -- Equipped with 1/4 pipe threads to accept standard air fittings.Simply remove the IPR valve and you can completely seal the high pressure oil system to find all of the leaks.
- Oil Rail Adapters -- Essential for connecting to the oil rail to test for leaks.Standard 1/4 NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air.
- Material -- Adpater made of brass; 6.0 IPR Valve air test tool made of high strength steel and zinc plated for rust prevention.
- Package -- 2Pcs Oil Rail Adapters + 1Pcs 6.0 IPR Valve Air Test Fitting Tool
- See more on Amazon...
Brand: QISF | Manufacturer: QISF
See On Amazon #14
6.0 IPR Valve with Socket, Injector Pressure Regulator for 2003-2010 Ford 6.0L V8 Powerstroke Diesel Turbocharged Excursion F250 F350 F450 Super Duty E350 E450
Asin: B07N8T9654 | Model: Injector Pressure Regulator IPR Valve | PartNumber: Injector Pressure Regulator IPR Valve | Ean: 0798542264379 | UPC: 798542264379
◭ [Function] : Precisely Manufactured Internal Valves High Quality Diaphragms And Springs To Perform Excellently Under All Engine Operating Conditions. Replaces Injector Pressure Regulator Valve And Regulates The Oil Bypass Circuit Of The High Pressure Oil Pump, That Opens And Closes To Allow High Pressure Oil Into The Injectors.This Enables The Pcm To Control Fuel Delivery By Increasing The Speed In Which The Ipr Valve Operates Thus Properly Control The Pressure In The High-Pressure Oil System..
◭ [Service] : 24 Month Warranty Service. If You Have Any Questions About Our Products, Please Contact Us By Email, We Will Reply You Within 24 Hours.Please Make Sure The Part Numbers Match The Part You Are Replacing.You Will Get: Ford 6.0L Injector Pressure Regulator (Ipr) Valve With Socket..
◭ [Material And Installation] : Ipr Injector Pressure Regulator Valve, Contructed Of Premium Material For Long Lasting Durability And Reliability. Robust Diaphragm Materials Design For Greater Resistance To Leakage, Improved Durability And Compatibility With A Wide Range Of Fuels. Direct Replace Fails Experiencing No-Start, Erratically Idling Or Jerking, Cracks, Stops Working Fuel Injector Pressure Regulator Valve..
◭ [Manufacturer Part Number] : Direct Replace Factory Part Ap63417 1846057C1 5C3z9c968ca 5C34-9C968-Ca W3250216 Cm5126 And Htv102 For A Proper Fit, Include Ipr Valve Seal Kit Oe Number 3C3z9h529a, Ap0035.
Features
- [Vehicle Application] : Injector Pressure Regulator Valve with Socket 6.0L Powerstroke Diesel Engines Fits for Ford 6.0L V8 Diesel Turbocharged Vehicles - for 2004-2010 Ford E-350 E-450, for 2003-2010 Ford Excursion, for 2003-2010 Ford F-250 F-350 F-450 F-550 Super Duty.
- [Manufacturer Part Number] : Direct replace factory part AP63417 1846057C1 5C3Z9C968CA 5C34-9C968-CA W3250216 CM5126 and HTV102 for a proper fit, Include IPR Valve Seal Kit OE Number 3C3Z9H529A, AP0035
- [Function] : Precisely manufactured internal valves high quality diaphragms and springs to perform excellently under all engine operating conditions. Replaces Injector Pressure Regulator Valve and regulates the oil bypass circuit of the high pressure oil pump, that opens and closes to allow high pressure oil into the injectors.This enables the PCM to control fuel delivery by increasing the speed in which the IPR valve operates thus properly control the pressure in the high-pressure oil system.
- [Material and Installation] : IPR Injector Pressure Regulator Valve, contructed of premium material for long lasting durability and reliability. Robust diaphragm materials design for greater resistance to leakage, improved durability and compatibility with a wide range of fuels. Direct Replace fails experiencing no-start, erratically idling or jerking, cracks, stops working fuel injector pressure regulator valve.
- [Service] : 24 month warranty service. If you have any questions about our products, please contact us by email, we will reply you within 24 hours.Please make sure the part numbers match the part you are replacing.You Will Get: Ford 6.0L Injector Pressure Regulator (IPR) Valve with Socket.
- See more on Amazon...
Brand: TIKSCIENCE | Manufacturer: Injector Pressure Regulator
See On Amazon #15
Hoypeyfiy 2 Wire Pigtail Connector Variable Geometry Turbo (VGT) Solenoid Injection Pressure Regulator (IPR) Valves For 6.0l Ford Powerstroke Chevy GMC Duramax 6.6L
Asin: B079TNCPPR | Model: Does Not Apply | PartNumber: Does Not Apply | Ean: 0667322958435 | UPC: 667322958435
New Aftermarket Item, Exactly Same Function As Your Original, No Modification Needed.
Condition:Brand New And Well Packaged.
Package Contains 1X Fuel Injector Connector Wiring Harness As Pictured.
2 Wire Fuel Injector Connector Plug Wire For Variable Geometry Turbo (Vgt) Solenoid, Injection Pressure Regulator (Ipr) Valves, Heui A/B Injectors, Valve Cover Gasket Repair Harness.
Features
- Two Wire Pigtail Connector Repair Harness Kit replacement For Ford Power Stroke, replacement For Navistar, And replacement For GM Duramax Engines
- 2 Wire Fuel Injector Connector Plug Wire for Variable Geometry Turbo (VGT) Solenoid, Injection Pressure Regulator (IPR) Valves, Heui A/B Injectors, Valve Cover Gasket Repair Harness
- New aftermarket item, exactly same function as your original, no modification needed
- Package contains 1x Fuel Injector Connector Wiring Harness as pictured
- Condition:brand new and well packaged
- See more on Amazon...
Brand: Hoypeyfiy | Manufacturer: Hoypeyfiy
See On Amazon #16
IPR Injector Pressure Regulato Valve Socket Removal Tool with Seal Kit 6.0 IPR Valve Socket Fit for 2003-2010 Ford 6.0L Powerstroke Excursion F250 F350 F450 F550 E350 E450
Asin: B0BPY2H44G
The Ipr Valve Fit For Your Powerstroke Is Responsible For Controlling The Pressure For The High-Pressure Oil System.The Ipr Commands The High Pressure Oil Pump That Fires The Injectors.
Used To Remove And Replace The Injector Pressure Regulator (Ipr) On Ford 6.0L And Other Diesel Engines..
The Ipr (Injection Pressure Regulator) Is Located On The High Pressure Oil Pump.The Ipr Valve O-Rings Are A Common Failure Point.
Fits For 2003 - 2010 Ford Super Duty F250 F350 F450 F550; 2003-2010 Ford Excursion, 2004-2010 Ford E-350 E-450 With 6.0L V8 Diesel Turbocharged Engines..
Features
- High Quality: High quality machined from steel or rubber with excellent mechanical and physical properties, this Socket shows its high tightness, corrosion resistance and durability
- Fits for 2003 - 2010 Ford Super Duty F250 F350 F450 F550; 2003-2010 Ford Excursion, 2004-2010 Ford E-350 E-450 with 6.0L V8 diesel turbocharged engines.
- The IPR Valve fit for Your Powerstroke Is Responsible For Controlling The Pressure For The High-Pressure Oil System.The IPR Commands The High Pressure Oil Pump That Fires The Injectors
- The IPR (Injection Pressure Regulator) Is Located On The High Pressure Oil Pump.The IPR Valve O-Rings Are A Common Failure Point
- Used to Remove and Replace the Injector Pressure Regulator (IPR) on Ford 6.0L and Other Diesel Engines.
- See more on Amazon...
Brand: VISVIC | Manufacturer: dihanfs
See On Amazon #17
7.3 IPR Valve Injector Pressure Regulator & ICP Control Sensor with Pigtail Compatible with Ford F250 F350 F450 F550 Super Duty E350 E450 E550 Excursion F650 F750 F81Z9C968AA 1829856C91 1841217C91
Asin: B09F9T1CBV | Model: F81Z9C968AA, 1829856C91, 1841217C91 | PartNumber: F81Z9C968AA, 1829856C91, 1841217C91 | Ean: 0752811018841 | UPC: 752811018841
【Premium Quality】Ipr Valve Injector Pressure Regulator Has Undergone A Rigorous Inspection To Ensure High Quality, Durable And Reliable Under Extreme Conditions.
【Notice】Please Check The Description And Compatibility Chart Before Your Purchasing.Please Contact Us If You Have Any Question Regarding Our This Product..
【Packge Include】7.3L Ipr Valve Fuel Injection Pressure Regulator + Icp Control Sensor + Pigtail Connector Kit, This Have Passed Undergoes Stringent Testing To Ensure High Quality, Durable And Reliable Under Extreme Conditions..
【Fitment】For E-350 Econoline 1995-1998, E-350 Econoline Club Wagon 1995-2002, E-350 Super Duty 1999-2003, E-450 Econoline Super Duty 2000-2002, E-450 Super Duty 2003, Econoline Super Duty 1996-1999, Excursion 2000-2003, F Super Duty 1994-1997, F150 1996, Hd 1997, F-350 1993-1997, F-350/F-450/F-550 Super Duty 1999-2003..
Features
- OEM Part Number 7.3 powerstroke IPR valve replaces part #: F81A9C968AA, F81Z9C968AB, AP63402, F81Z9C968AA, F81Z9C968AB, F81Z-9C968-AB, F5TZ9C968A, 1841217C91, 1829856C91, 1836412C91, 1841086C91, CM5013, CM-5013, PR315, PR1315
- Fitment For E-350 Econoline 1995-1998, E-350 Econoline Club Wagon 1995-2002, E-350 Super Duty 1999-2003, E-450 Econoline Super Duty 2000-2002, E-450 Super Duty 2003, Econoline Super Duty 1996-1999, Excursion 2000-2003, F Super Duty 1994-1997, F150 1996, HD 1997, F-350 1993-1997, F-350/F-450/F-550 Super Duty 1999-2003.
- Premium Quality IPR Valve Injector Pressure Regulator has Undergone A Rigorous Inspection To Ensure High Quality, Durable And Reliable Under Extreme Conditions
- Packge include 7.3L ipr valve fuel injection pressure regulator + ICP control sensor + pigtail connector kit, this have passed undergoes stringent testing to ensure high quality, durable and reliable under extreme conditions.
- Notice Please check the description and compatibility chart before your purchasing.Please contact us if you have any question regarding our this product.
- See more on Amazon...
Brand: liriuda | Manufacturer: liriuda auto parts
See On Amazon #18
IPR Socket Tool Screen Kit - Compatible with Ford Powerstroke 6.0L Vehicles - F-250, F-350 Super Duty, Excursion, E-350 - Replaces 3C3Z9H529A, 904-415, 3C3Z-9H529-A, Injection Pressure Regulator
Asin: B07QP1QXVW | Model: 3C3Z-9H529-A | PartNumber: 3C3Z-9H529-A
Replaces Part# 3C3z9h529a, 904-415, 3C3z-9H529-A, 904415 Commonly Found On Popular Models With The Diesel Powerstroke 6.0 Engine Including Year Models 04, 05, 06, 07, 08, 09, 10. If You Are Experiencing No Or Hard Starting When The Engine Is Hot Or After Stalling And Usually Starts When It Is Cold Or Your Vehicle Is Idling Erratically Or Jerking Then Your Ipr Valve Screen And Seals May Need Replacing.
Lifetime Warranty - This Replacement Ipr Tool And Screen Kit Manufactured By Aa Ignition Comes Complete With A Lifetime Warranty, If The Parts Fail Simply Contact Us For A Replacement. This Is A Complete Kit Which Includes All The O-Rings Needed For A Leak-Resistant Operation. Take Advantage Of Our Lifetime Warranty By Purchasing This Ipr Socket Tool And Seal Kit And Replacing It Yourself..
Oem Fit, Quality, Finish - While This Is Not A Genuine Oem Part, It Is A Direct Replacement Manufactured By Aa Ignition And Will Fit, Work And Look Exactly Like The Factory Screen And Seals Found On Your 6.0L Powerstroke Vehicle. This Kit Also Includes A Socket Tool Specially Made For Removal And Installation Of Your Ipr Valve Which Has A Protruding Electrical Connector..
Compatible Replacement For Ford Vehicles - 2004 - 2005 E350 Club Wagon | 2004 - 2010 E350 Super Duty | 2004 - 2010 E450 Super Duty | 2003 - 2005 Excursion | 2003 - 2007 F250 Super Duty | 2003 - 2007 F350 Super Duty | 2003 - 2007 F450 Super Duty | 2003 - 2007 F550 Super Duty | 2003, 2004, 2005, 2006, 2007 F650 | 2003 - 2007 F750 |. The Oil System Usually Gets Contaminated When The Oil Cooler Is Serviced Or Replaced And Has Not Been Cleaned Properly..
Features
- Replacement IPR Valve Seal Kit With Socket Tool - The injection pressure regulator valve regulates the oil bypass circuit of the high pressure oil pump. It is an electromagnetic valve that opens and closes to allow high pressure oil into the injectors. When the oil system gets contaminated by dirt or debris, the mesh filter of the IPR valve gets torned letting the debris get in and make the plunger mechanism inside to get stucked causing the vehicle to not build up pressure.
- Compatible Replacement for Ford Vehicles - 2004 - 2005 E350 Club Wagon | 2004 - 2010 E350 Super Duty | 2004 - 2010 E450 Super Duty | 2003 - 2005 Excursion | 2003 - 2007 F250 Super Duty | 2003 - 2007 F350 Super Duty | 2003 - 2007 F450 Super Duty | 2003 - 2007 F550 Super Duty | 2003, 2004, 2005, 2006, 2007 F650 | 2003 - 2007 F750 |. The oil system usually gets contaminated when the oil cooler is serviced or replaced and has not been cleaned properly.
- Replaces Part# 3C3Z9H529A, 904-415, 3C3Z-9H529-A, 904415 commonly found on popular models with the Diesel Powerstroke 6.0 engine including year models 04, 05, 06, 07, 08, 09, 10. If you are experiencing no or hard starting when the engine is hot or after stalling and usually starts when it is cold or your vehicle is idling erratically or jerking then your IPR valve screen and seals may need replacing
- OEM Fit, Quality, Finish - While this is not a genuine OEM part, it is a direct replacement manufactured by AA Ignition and will fit, work and look exactly like the factory screen and seals found on your 6.0L Powerstroke vehicle. This kit also includes a socket tool specially made for removal and installation of your IPR valve which has a protruding electrical connector.
- Lifetime Warranty - This replacement IPR tool and screen kit manufactured by AA Ignition comes complete with a lifetime warranty, if the parts fail simply contact us for a replacement. This is a complete kit which includes all the o-rings needed for a leak-resistant operation. Take advantage of our lifetime warranty by purchasing this ipr socket tool and seal kit and replacing it yourself.
- See more on Amazon...
Brand: AA Ignition | Manufacturer: AA Ignition
Warranty: Lifetime Warranty
See On Amazon #19
E-cowlboy Fits for Ford 6.0L-7.3LPowerstroke Diesel High Pressure Oil System IPR Air Test Tool Special KIT
Asin: B0BGC5MK45 | Model: 6.0L -7.3L High Pressure Oil Test Kit | PartNumber: 6.0L -7.3L High Pressure Oil Test Kit
Easy To Use：Each Tool Includes Three Extra O-Ring Sets For The Ipr Fitting.To Connect, Just Remove The Air Cleaner, Ficm, And Coolant Degas Bottle (Turbo Removal Is Not Required). Remove The Ipr Valve And Thread In The Tool, Hand Tightening Using The Hose Is Sufficient. Connect Shop Air And Listen For Leaks. To Locate The Smallest Leaks Close The Shutoff Valve On The Tool To Seal The System..
100% Satisfaction Guarantee -- If You're Not 100% Satisfied With This Tool, Simply Return It For A Full Refund In 30 Days. Premium Support & 12-Month Warranty..
Be Careful：If Desired A Scan Tool Can Be Used To Monitor Air Pressure In The System By Observing The Icp Sensor Reading. This Is Not A Required Step. To Prevent Costly Repairs We Recommend Air Checking Every 6.0L For High Pressure Oil Leaks After Any Part Of The System Has Been Disassembled..
Advantages With This Tool:No Scan Tool Or Ipr Driver Tool Is Required ,Leaks Of Any Size Can Be Detected ,Engine Builders Can Quickly Verify That An Engine Has No High Pressure Oil Leaks Before Installing The Engine Into The Vehicle Where Repairs Are Much More Difficult.Allows Systems With The Latest Updated Standpipes To Be Tested.This Tool Takes The Place Of The Ipr Valve Meaning That The System Can Be Completely Sealed So That Even The Smallest Leaks Can Be Detected.The Heavy-Duty Hydraulic Hose Is Rated Up To 5,300 Psi..
Features
- Scope of application: Fits for Ford 6.0L - 7.3LPowerstroke Engines,Includes 7.3L Powerstroke High Pressure Oil System IPR Air Test Fitting.
- Advantages With This Tool:NO Scan tool or IPR driver tool is required ,Leaks of ANY size can be detected ,engine builders can quickly verify that an engine has no high pressure oil leaks before installing the engine into the vehicle where repairs are much more difficult.Allows systems with the latest updated standpipes to be tested.This tool takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.The heavy-duty hydraulic hose is rated up to 5,300 PSI.
- Easy to use Each tool includes three extra o-ring sets for the IPR fitting.To connect, just remove the air cleaner, FICM, and coolant degas bottle (Turbo removal is NOT required). Remove the IPR valve and thread in the tool, hand tightening using the hose is sufficient. Connect shop air and listen for leaks. To locate the smallest leaks close the shutoff valve on the tool to seal the system.
- Be careful If desired a scan tool can be used to monitor air pressure in the system by observing the ICP sensor reading. This is not a required step. To prevent costly repairs we recommend air checking every 6.0L for high pressure oil leaks after any part of the system has been disassembled.
- 100% SATISFACTION GUARANTEE -- If you're not 100% satisfied with this tool, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty.
- See more on Amazon...
Brand: E-cowlboy | Manufacturer: E-cowlboy
Warranty: 1 year warranty
See On Amazon
Looking For Something Else?
Search