5PCS ESP32 Breakout Board GPIO 1 into 2 Compatible with 30 Pins ESP32S ESP32 Development Board 2.4 GHz Dual Core WLAN WiFi + Bluetooth 2-in-1 Microcontroller ESP-WROOM-32 Chip for Arduino
Asin: B0BNQ8V65G | Ean: 0687117708519 | UPC: 687117708519
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.The Expansion Board Is A Double-Layer Board. One Pin Is Wired On Both Sides. Therefore, The Circuit Is Stable And Highly Reliable, And There Will Be No Poor Circuit Contact And Unstable Signal Transmission..
Pin Header & Screw Terminal. You Can Select Them As You Asked.
Aitrip Breakout Board Can Expand One Gpio Pin Of Esp32 Development Board To Two, Which Is Very Nice For You To Reuse All Pins , It Is A Good Tool For Your Smart Home Projects. Nice Breadboard Alternative.
Compatible With Esp32 Board.These Boards Fit The 30 Pin Esp32（Esp32 As The Picture Show）.
30Pins Ref Asin:B0bk13hwbj ; B08d5zd528 ; B07wcg1plv ; B0b11n1x8r ; B0b19krprc ; B0b19dxfhx.
Features
- GPIO 1 INTO 2: The esp32 breakout board can expand one GPIO pin of esp32 development board to two.Convenient to reuse all pins in smart home DIY projects. Great breadboard alternative.
- 30Pins ref asin:B0BK13HWBJ ; B08D5ZD528 ; B07WCG1PLV ; B0B11N1X8R ; B0B19KRPRC ; B0B19DXFHX
- The expansion board is a double-layer board. One pin is wired on both sides. Therefore, the circuit is stable and highly reliable, and there will be no poor circuit contact and unstable signal transmission.
- Compatible with ESP32 board.These boards fit the 30 pin ESP32 ESP32 as the picture show
- Pin Header & Screw Terminal. you can select them as you asked
- AITRIP breakout board can expand one GPIO pin of ESP32 development board to two, which is very nice for you to reuse all pins , it is a good tool for your smart home projects. Nice breadboard alternative
- See more on Amazon...
Brand: AITRIP | Manufacturer: AITRIP
See On Amazon Similar To 5PCS ESP32 Breakout Board GPIO
#1
HiLetgo 3pcs ESP32 ESP-32D ESP-WROOM-32 CP2012 USB C 38 Pin WiFi+Bluetooth Dual Core Type-C Interface ESP32-DevKitC-32 Development Board Module STA/AP/STA+AP
Asin: B0CNYK7WT2 | Model: 3-01-1842 | PartNumber: 3-01-1842
Support Many Kinds Of Interfaces Such As Uart/Spi/I2c/Pwm/Dac/Adc..
With 2.4Ghz Wifi+Bluetooth Dual-Mode, Support Sta/Ap/Sta+Ap Mode, Universal At Command, Easy To Use..
Esp32 Integrates Antenna, Switches, Rf Balun, Power Amplifiers, Low Noise Amplifiers, Filters And Power Management Modules..
Features
- ESP32 CP2012 USB C (Type-C) core board, it has 38 pins and more features than a 30-pin module. Narrower width, can be connected to the breadboard very well.
- ESP32 integrates antenna, switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules.
- Support many kinds of interfaces such as UART/SPI/I2C/PWM/DAC/ADC.
- With 2.4GHz WiFi+Bluetooth Dual-mode, support STA/AP/STA+AP mode, universal AT command, easy to use.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #2
HiLetgo ESP-WROOM-32 ESP32 ESP-32D Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE
Asin: B0718T232Z | Model: 3-01-1287 | PartNumber: 3-01-1287
Support Lwip Protocol, Freertos.
Esp32 Is A Safe, Reliable, And Scalable To A Variety Of Applications.
Supportthree Modes: Ap, Sta, And Ap+Sta.
Ultra-Low Power Consumption, Works Perfectly With The Arduino Ide.
Features
- 2.4GHz Dual Mode WiFi + Bluetooth Development Board
- Ultra-Low power consumption, works perfectly with the Arduino IDE
- Support LWIP protocol, Freertos
- SupportThree Modes: AP, STA, and AP+STA
- ESP32 is a safe, reliable, and scalable to a variety of applications
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #3
Teyleten Robot ESP32S ESP32 ESP-WROOM-32 Development Board 2.4GHz Dual-Core WiFi +Bluetooth 2 Function Microcontroller for Arduino (ESP32 30P, 3PCS)
Asin: B08246MCL5 | Model: A9 | PartNumber: A9 | Ean: 8711393446796
2. The Best Power And Rf Characteristics Are Safe, Reliable And Scalable For Various Applications..
9. 38P And 30P Board Sizes And Circuit Layouts Are Different..
6.The Maximum Operating Voltage Of The Esp32 Is 3.3V. The Esp32 Has An On-Board Voltage Regulator That Can Withstand Voltages Up To 5V Using The Vin And Gnd Pins. Once A Voltage Is Input To The Esp32 Development Board's Vin Pin, That Voltage Is Passed Through The Esp32's On-Board Voltage Regulator (Ams1117), Which Outputs A Constant 3.3V, Which Is The Board's Operating Voltage. Note: The Maximum Operating Voltage Of The Esp32 Is 3.3V. The Maximum Voltage That Can Be Applied To The Esp32 Development Board From The Vin Pin Is 5V.Usb Power Supply Is 5V..
7.You Need To Driver The Cp2102 Before You Can Start Using It.
4. Compact And Portable: Being So Mini And Light-Weight, This Product Does Not Take Much Space And Can Be Easily Taken Away..
5.For Arduino Ide,Choose Esp32 Dev,Make Sure That Your Program Or Run A Program Smaller Than The Esp32 Configuration.
3. Meticulous Workmanship: The Meticulous Design, Perfect In Workmanship, Durable And Long Service Life..
8. Durable Material: This Product Is Made Of High-Quality Material, Durable, Long Service Time, Firm And Stable In Use..
1. The Complete Solution Takes Up The Least Printed Circuit Board Area. This Board Is Used With 2.4Ghz Dual-Mode Wifi And Wireless Chips Using 40Nm Tsmc Low-Power Technology..
Features
- If you think you have received the wrong product, please contact us and give us a chance to correct it,We also have tech support, just contact us on Amazon,thank you.
- 1. The complete solution takes up the least printed circuit board area. This board is used with 2.4GHz dual-mode WiFi and wireless chips using 40nm TSMC low-power technology.
- 2. The best power and RF characteristics are safe, reliable and scalable for various applications.
- 3. Meticulous workmanship: The meticulous design, perfect in workmanship, durable and long service life.
- 4. Compact and portable: being so mini and light-weight, this product does not take much space and can be easily taken away.
- 5.For Arduino IDE,choose ESP32 DEV,make sure that your program or run a program smaller than the ESP32 configuration
- 6.The maximum operating voltage of the ESP32 is 3.3V. The ESP32 has an on-board voltage regulator that can withstand voltages up to 5V using the VIN and GND pins. Once a voltage is input to the ESP32 development board's VIN pin, that voltage is passed through the ESP32's on-board voltage regulator (AMS1117), which outputs a constant 3.3V, which is the board's operating voltage. Note: The maximum operating voltage of the ESP32 is 3.3V. The maximum voltage that can be applied to the ESP32 Development Board from the VIN pin is 5V.USB power supply is 5V.
- 7.you need to driver the CP2102 before you can start using it
- 8. Durable material: This product is made of high-quality material, durable, long service time, firm and stable in use.
- 9. 38P and 30P board sizes and circuit layouts are different.
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.48 x 2.03 x 1.12 inches
See On Amazon #4
3 Pieces Development Board 2.4GHz WiFi Dual Cores Microcontroller Integrated with Antenna RF Filters Compatible with Arduino IDE(32)
Asin: B09GK74F7N
32 Development Board Is Safe, Reliable And Scalable To Various Applications, Bringing You A Lot Of Convenience.
Low Power Consumption: The Development Board Uses 2.4Ghz Dual-Mode Wi-Fi, Chip 32, And 40Nm Low Power Consumption Technology.
Small Size: 32 Dual-Mode Module Is Compact And Easy To Embed Into Your Device, Convenient To Use.
Multiple Functions: 32 Development Board Integrates Antenna Switches, Rf Balun, Power Amplifiers, Low Noise Amplifiers, Filters And Power Management Modules; And The Entire Solution Occupies The Smallest Printed Circuit Board Area.
Features
- Package contains: you will get 3 pieces of 32 2.4GHz dual-mode development boards, enough for your daily use and replacement
- Multiple functions: 32 development board integrates antenna switches, RF balun, power amplifiers, low noise amplifiers, filters and power management modules; And the entire solution occupies the smallest printed circuit board area
- 32 Development board is safe, reliable and scalable to various applications, bringing you a lot of convenience
- Small size: 32 dual-mode module is compact and easy to embed into your device, convenient to use
- Low power consumption: the development board uses 2.4GHz dual-mode Wi-Fi, chip 32, and 40nm low power consumption technology
- See more on Amazon...
Brand: Flutesan | Manufacturer: Flutesan
Dimensions: 0.51 x 1.96 x 1.04 inches
See On Amazon #5
ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA Compatible with Arduino IDE (1 PCS)
Asin: B07WCG1PLV | Model: 15363 | PartNumber: 15363 | Ean: 0701715430556 | UPC: 701715430556
Supportthree Modes: Ap, Sta, And Ap+Sta.
1Pcs 30Pin Esp32 Development Board 2.4Ghz Wifi Dual Cores Microcontroller Integrated With Antenna Rf Low Noise Amplifiers Filters.
Ultra-Low Power Consumption, Compatible With Arduino Ide.
Support Lwip Protocol, Freertos;Esp32 Is A Safe, Reliable, And Scalable To A Variety Of Applications.
Features
- 2.4GHz Dual Mode WiFi + Bluetooth Development Board
- Support LWIP protocol, Freertos;ESP32 is a safe, reliable, and scalable to a variety of applications
- SupportThree Modes: AP, STA, and AP+STA
- Ultra-Low power consumption, Compatible with Arduino IDE
- 1PCS 30Pin ESP32 Development Board 2.4GHz WiFi Dual Cores Microcontroller Integrated with Antenna RF Low Noise Amplifiers Filters
- See more on Amazon...
Brand: AITRIP | Manufacturer: AiTrip
See On Amazon #6
Freenove Breakout Board for ESP32 / ESP32-S3 WROVER WROOM, Terminal Block Shield with Pin Header, 5V 3.3V Power Outputs, GPIO Status LED
Asin: B0CD2512JV | Model: FNK0091 | PartNumber: FNK0091
Independent Led -> The Status Led Is Driven By The Chip Instead Of The Gpio So The Gpio Will Not Be Affected..
Terminal Block And Header -> Connect To All Gpio Headers Of Raspberry Pi Pico, 2.54Mm / 0.1In Pitch..
Power Circuit -> Provide Multiple 5V And 3.3V Power Outputs. (5V Output Up To 3A With External Power Supply.).
Gpio Status Led -> Led On If Gpio Outputs/Inputs High Level, Led Off If Gpio Outputs/Inputs Low Level..
Features
- Compatible models -> Freenove ESP32 / ESP32-S3 series. (Note: Boards from other brands are not compatible due to different pinout.)
- GPIO status LED -> LED on if GPIO outputs/inputs high level, LED off if GPIO outputs/inputs low level.
- Independent LED -> The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected.
- Power circuit -> Provide multiple 5V and 3.3V power outputs. (5V output up to 3A with external power supply.)
- Terminal block and header -> Connect to all GPIO headers of Raspberry Pi Pico, 2.54mm / 0.1in pitch.
- See more on Amazon...
Brand: FREENOVE | Manufacturer: Freenove
Warranty: 1 year
See On Amazon #7
ideaspark ESP32 Development Board Integrated 0.96 Inch OLED Display,CH340 Driver,WiFi+BLE Wireless Module,and Micro USB Works Great for Arduino/Micropython(Pin Header Soldered)
Asin: B0CN4F354N | Ean: 0727210185197 | UPC: 727210185197
This Board Uses I2c To Connect To An Oled Display Via The Sda (D21 / Gpio21) And Scl (D22 / Gpio22) Pins. With This Board,It's Easy To Display A Variety Of Information And Data.
This Board Is An Outstanding Option For Various Internet Of Things (Iot) Projects. It Can Be Used To Display Network Connection Status,Monitor Information, Power Levels, And Other Relevant Data. Additionally, It's Suitable For Building Internet Weather Stations, News Stations, Clocks, And Other Similar Applications.
To Install The New Version Driver For Ch340,Simply Search For The Keywords "Ch340 Driver" On Google.Com Or Bing.Com And Follow The Installation Instructions Provided.Recommended For Win10 Operating System.
The Board Is Based On Esp32-Wroom-32 Module Integrated With Antenna Switches, Rf Balun, Power Amplifiers, Low-Noise Amplifiers, Filters, And Management Modules, And The Entire Solution Occupies The Least Area Of Pcb. 2.4 Ghz Wi-Fi Plus Ble Dual-Mode Chip, With Tsmc Ultra-Low Power Consumption 40Nm Technology, Power Dissipation Performance And Rf Performance Is The Best, Safe And Reliable, Easy To Extend To A Variety Of Applications.
Features
- The ESP32 0.96'' OLED board has all the features of the traditional ESP32 Devkit V1 module,with the same exact peripheral ports,offers seamless integration with a 0.96-inch OLED display, eliminating the need for frustrating wires and breadboards.Display features a high-resolution 128x64 with SSD1306 driver and is compatible with I2C interfaces. Plus,It uses Micro usb cable to connect. Say goodbye to messy setups and hello to hassle-free electronics with the ESP32 board
- The Board is based on ESP32-WROOM-32 module integrated with Antenna switches, RF Balun, power amplifiers, low-noise amplifiers, filters, and management modules, and the entire solution occupies the least area of PCB. 2.4 GHz Wi-Fi plus BLE dual-mode chip, with TSMC Ultra-low power consumption 40nm technology, power dissipation performance and RF performance is the best, safe and reliable, easy to extend to a variety of applications
- This board uses I2C to connect to an OLED display via the SDA (D21 / GPIO21) and SCL (D22 / GPIO22) pins. With this board,it's easy to display a variety of information and data
- To install the new version driver for CH340,simply search for the keywords CH340 Driver on Google.com or Bing.com and follow the installation instructions provided.Recommended for Win10 Operating System
- This board is an outstanding option for various Internet of Things (IoT) projects. It can be used to display network connection status,monitor information, power levels, and other relevant data. Additionally, it's suitable for building Internet Weather Stations, News Stations, Clocks, and Other similar applications
- See more on Amazon...
Brand: ideaspark | Manufacturer: ideaspark
Dimensions: 0.63 x 2.83 x 2.05 inches
Warranty: No
See On Amazon #8
KeeYees ESP32S ESP32 Development Board 2.4 GHz Dual Core WLAN WiFi + Bluetooth 2-in-1 Microcontroller ESP-WROOM-32 Chip for Arduino (38PIN Narrow Version, 2PCS)
Asin: B07QCP2451 | Ean: 0713871269840 | UPC: 713871269840
Support Lua Program, Easy To Develop. Support Of Three Modes: Ap, Sta And Ap + Sta..
Technical Support: Our Pdf Tutorial Is Available On This Page. Please Pull Down This Page To Find The Tutorial: User Guide (Pdf).
This Board Is Used With 2.4 Ghz Dual-Mode Wi-Fi And Bluetooth Chips Esp-Wroom-32, As Well As The 40Nm Low-Power Technology..
The Module Has 38 Pins And Has More Features Than A 30-Pin Module. Narrower Width, Compatible With Breadboard.
Features
- This module is safe, reliable, and scalable to a variety of applications.
- The module has 38 pins and has more features than a 30-pin module. Narrower width, compatible with breadboard
- Support Lua program, easy to develop. Support of three modes: AP, STA and AP + STA.
- This board is used with 2.4 GHz dual-mode Wi-Fi and Bluetooth chips ESP-WROOM-32, as well as the 40nm low-power technology.
- Technical Support: Our PDF tutorial is available on this page. Please pull down this page to find the tutorial: User Guide (PDF)
- See more on Amazon...
Brand: KeeYees | Manufacturer: KeeYees
Dimensions: 0.47 x 1.90 x 1.00 inches
See On Amazon #9
naughtystarts for ESP32 Breakout Board 3.5mm / 0.14" Terminal GPIO Expansion Board for 0.9" / 1.0" Size ESP32 Module ESP-WROOM-32 ESP32-DevKitC (Pack of 2pcs)
Asin: B0BYS6THLF
Shrapnel Screw Terminal: 3.5Mm / 0.14" Pitch.
It's Fully Assembled, No Soldering Required..
It's Suitable For 18~24Awg Cable Connection, Easy To Use..
The Dual-Row Input Bus Allows You To Plug In 0.9 "Or 1.0" Esp32 Modules For Maximum Compatibility..
Features
- for ESP32 GPIO expansion board 38pin with terminal.
- The dual-row input bus allows you to plug in 0.9 or 1.0 ESP32 modules for maximum compatibility.
- Shrapnel Screw Terminal: 3.5mm / 0.14 Pitch
- It's suitable for 18~24AWG cable connection, easy to use.
- It's fully assembled, no soldering required.
- See more on Amazon...
Brand: naughtystarts | Manufacturer: naughtystarts
Dimensions: 0.59 x 3.94 x 3.15 inches
Warranty: 3 Years
See On Amazon #10
Ultra-Small RPi GPIO Terminal Block Breakout Board Module, for Raspberry Pi
Asin: B084C69VSQ | Model: MD-D1352-1 | PartNumber: MD-D1352-1 | Ean: 6937902390134
Fr-4 Fiber Glass Pcb, Dual Copper Layers..
Packing List: 1X Terminal Block Breakout Module, 4X M2.5X6mm Screws, 4X 10Mm Nylon Standoffs. 2X 11.5Mm Brass Standoffs, 1X Small Slotted Screwdriver (Note: The Item Not Include Raspberry Pi Board)..
2X20 Positions Header Connect To Raspberry Pi Board..
Terminal Block Pitch 2.54Mm/0.1", Wire Size Range 28Awg To 18Awg, Strip Length 4.5Mm, Screw M1.6 Steel, Pin Header And Cage Copper..
Features
- The item has been soldered and assembled. Support for Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, Pi Zero-W.
- Terminal block pitch 2.54mm/0.1, wire size range 28AWG to 18AWG, strip length 4.5mm, screw M1.6 steel, pin header and cage copper.
- FR-4 fiber glass PCB, dual copper layers.
- 2x20 positions header connect to Raspberry Pi board.
- Packing list: 1x terminal block breakout module, 4x M2.5x6mm screws, 4x 10mm nylon standoffs. 2x 11.5mm brass standoffs, 1x small slotted screwdriver (NOTE: the item not include Raspberry Pi Board).
- See more on Amazon...
Brand: OONO | Manufacturer: CZH-LABS
See On Amazon #11
Ultra-Small GPIO Terminal Block Breakout Board Module for Arduino UNO R3
Asin: B08XWCN43C | Model: MD-D1408-1 | PartNumber: MD-D1408-1 | Ean: 6954525591861
Fr-4 Fiber Glass Pcb, Dual Copper Layers..
Packing List: 2X(1 Set, A And B Each One) Terminal Block Breakout Modules, 4X 11Mm Nylon Standoffs. 4X 6Mm Nylon Standoffs. 4X Nylon Nuts, 1X Small Slotted Screwdriver (Note: The Item Not Include Arduino Uno Module)..
Pin Header Connect To Arduino Board. The Breakout Board Is Firmly Fixed To Arduino-Uno Through Standoffs And Nut, And Will Not Shake..
Terminal Block Pitch 2.54Mm/0.1", Wire Size Range 28Awg To 18Awg, Strip Length 4.5Mm, Screw M1.6 Steel, Pin Header And Cage Copper..
Features
- The item has been soldered and assembled. Support for Arduino Uno R3.
- Terminal block pitch 2.54mm/0.1, wire size range 28AWG to 18AWG, strip length 4.5mm, screw M1.6 steel, pin header and cage copper.
- FR-4 fiber glass PCB, dual copper layers.
- Pin header connect to Arduino board. The breakout board is firmly fixed to Arduino-Uno through standoffs and nut, and will not shake.
- Packing list: 2x(1 set, A and B each one) terminal block breakout modules, 4x 11mm nylon standoffs. 4x 6mm nylon standoffs. 4x nylon nuts, 1x small slotted screwdriver (NOTE: the item not include Arduino Uno module).
- See more on Amazon...
Brand: OONO | Manufacturer: CZH-LABS
See On Amazon #12
4PCS ESP32 Development Board ESP-32S NodeMCU Board ESP-WROOM-32 WiFi Microcontroller 2.4GHz 2 in 1 Dual-Core WiFi + Bluetooth Processor Integrated Chip CP2102 Low Power Consumption ESP-32S
Asin: B086MLNH7N | Model: 13051-1 | PartNumber: 13051-1 | Ean: 0701715433908 | UPC: 701715433908
Esp32 Development Board Support Lua Program, Easy To Develop, Support Lwip Protocol, Freertos, Three Modes : Ap, Sta And Ap + Sta..
Esp32 Is A Safe, Reliable, And Scalable To A Variety Of Applications,The User Can Cut Off The Power Of The Cpu And Use The Low-Power Coprocessor To Continuously Monitor The Status Of The Peripherals Or Whether Some Of The Analog Values Exceed The Threshold..
The Module Supports For Nodemcu And Other Development Environments, Which Expands The Range Of Its Resources Available And Greatly Improves The Ease Of Learning And Development. Of Course, It Can Also Be Widely Used In Internet Of Things Occasions, Such As Home Automation, Wireless Industrial Control, Wireless Positioning System Signal.
The Module Is Esp-Wroom-32 Module, The Peripheral Uses The Usb Serial Port Chip Cp2102 To Expand The Micro Usb Interface, Which Can Be Directly Debugged By A Usb Connected Computer, And The Data Transmission Is Fast And Stable..
Features
- Dual core ESP-32 development board, 2.4GHz dual mode development board.There are two touch buttons, one is reset, the other is enable module to enter the halberd program mode.
- The module is ESP-WROOM-32 module, the peripheral uses the USB serial port chip CP2102 to expand the micro USB interface, which can be directly debugged by a USB connected computer, and the data transmission is fast and stable.
- ESP32 development board support lua program, easy to develop, support LWIP protocol, Freertos, three modes : AP, STA and AP + STA.
- The module supports for NodeMCU and other development environments, which expands the range of its resources available and greatly improves the ease of learning and development. Of course, it can also be widely used in Internet of things occasions, such as home automation, wireless industrial control, wireless positioning system signal
- ESP32 is a safe, reliable, and scalable to a variety of applications,the user can cut off the power of the CPU and use the low-power coprocessor to continuously monitor the status of the peripherals or whether some of the analog values exceed the threshold.
- See more on Amazon...
Brand: DORHEA | Manufacturer: DORHEA
Dimensions: 0.59 x 1.96 x 1.10 Inches
See On Amazon #13
HiLetgo 3pcs ESP32 Mini ESP-WROOM-32 Development Board WLAN WiFi Bluetooth IoT Development Board
Asin: B07BK435ZW | Model: 8541612412 | PartNumber: 8541612412
Input/Output Voltage: Dc 3.3V.
Sram: 520Kb External Flash.
I/O Pins: 34.
Power Supply Voltage: Dc 5V (Usb).
Features
- ESP32 Mini development board, everything needed to program the ESP32 module, ESP32/32S WIFI Development Bluetooth ESP8266 Module CP2104 for Arduino IDE.
- Power supply voltage: DC 5V (USB)
- Input/Output voltage: DC 3.3V
- I/O Pins: 34
- SRAM: 520KB External Flash
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
Weight: 0.02 pounds
See On Amazon #14
LK COKOINO for Raspberry Pi GPIO Breakout, T-Type GPIO Expansion Board+830 Points Solderless Breadboard+65pcs Jumper Cables+40pin Rainbow Ribbon Cable
Asin: B08B4SHS18 | Model: CKK0007 | PartNumber: CKK0007 | Ean: 0746362084554 | UPC: 746362084554
This Kit Will Make Your Raspberry Pi More Flexible And Easy To Build With Other Sensors For Many Experiments..
Raspberry Pi Development Board Is Not Included In The Kit..
Great For Testing Circuits Before Committing Them To A More Permanent Board And Planning Out A Bigger Project..
The Rainbow Ribbon, Jumper Wires And T Connector Board Are Really Handy For Getting The Gpio Header To A Breadboard For Your Creations..
Features
- This is a raspberry pi gpio extender kit that provides a way to easily connect your Raspberry Pi 4B/3B+/3B/ 2B/ 1B+ to a breadboard.
- The rainbow ribbon, jumper wires and T connector board are really handy for getting the GPIO header to a breadboard for your creations.
- This kit will make your Raspberry Pi more flexible and easy to build with other sensors for many experiments.
- Great for testing circuits before committing them to a more permanent board and planning out a bigger project.
- Raspberry PI development board is not included in the kit.
- See more on Amazon...
Brand: LK COKOINO | Manufacturer: LK COKOINO
Weight: 0.43 pounds
See On Amazon #15
Freenove Breakout Board for Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W/Zero, Terminal Block HAT, GPIO Status LED
Asin: B0BFB618CJ | Model: FNK0080 | PartNumber: FNK0080
Independent Led -> The Status Led Is Driven By The Chip Instead Of The Gpio So The Gpio Will Not Be Affected..
Gpio Name -> The Bcm Numbering Name Of Each Gpio Is Printed Next To The Port..
Terminal Block And Header -> Connect To All Pins Of Raspberry Pi's 40-Pin Gpio Header, 2.54Mm / 0.1In Pitch..
Gpio Status Led -> Led On If Gpio Outputs / Inputs High Level, Led Off If Gpio Outputs / Inputs Low Level..
Features
- Compatible models -> Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero W / Zero. (Note: NOT compatible with Raspberry Pi 400.)
- GPIO status LED -> LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level.
- Independent LED -> The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected.
- Terminal block and header -> Connect to all pins of Raspberry Pi's 40-pin GPIO header, 2.54mm / 0.1in pitch.
- GPIO name -> The BCM numbering name of each GPIO is printed next to the port.
- See more on Amazon...
Brand: FREENOVE | Manufacturer: Freenove
Warranty: 1 year
See On Amazon #16
KeeYees 2pcs ESP32 Breakout Board Shield GPIO 1 into 2 for 30PIN ESP32 Development Board
Asin: B0B9MY5LY7
2 Type Connections: Pin Header & Screw Terminal. Just Select Them According To Your Purpose..
Updated Version: Compared With The Previous Version, The Board Of This Version Has Been Soldered Completely. No Need To Solder Parts By Yourself, Which Is Very Convenient To Use..
Double-Layer Pcb: The Expansion Board Is A Double-Layer Board. One Pin Is Wired On Both Sides. Therefore, The Circuit Is Stable And Highly Reliable, And There Will Be No Poor Circuit Contact And Unstable Signal Transmission..
Gpio 1 Into 2: This Breakout Board Can Expand One Gpio Pin Of Esp32 Development Board To Two, Which Is Convenient For Users To Reuse All Pins In Smart Home Projects. Nice Breadboard Alternative..
Features
- IMPORTANT: Only compatible with 30 pins ESP32 development board, ref asin: B0B9G74NNM. Not applicable to other versions.
- GPIO 1 INTO 2: This breakout board can expand one GPIO pin of esp32 development board to two, which is convenient for users to reuse all pins in smart home projects. Nice breadboard alternative.
- 2 TYPE CONNECTIONS: Pin Header & Screw Terminal. Just select them according to your purpose.
- DOUBLE-LAYER PCB: The expansion board is a double-layer board. One pin is wired on both sides. Therefore, the circuit is stable and highly reliable, and there will be no poor circuit contact and unstable signal transmission.
- UPDATED VERSION: Compared with the previous version, the board of this version has been soldered completely. No need to solder parts by yourself, which is very convenient to use.
- See more on Amazon...
Brand: KeeYees | Manufacturer: KeeYees
Dimensions: 0.39 x 2.60 x 2.48 inches
Warranty: 1 year
See On Amazon #17
KEYESTUDIO GPIO Breakout Kit for Raspberry Pi - Assembled Pi Breakout + Rainbow Ribbon Cable + 400 Tie Points Solderless Breadboard
Asin: B072XBX3XX | Model: 8541612268 | PartNumber: 8541612268 | Ean: 0606184533206 | UPC: 606184533206
High Quality Solderless Breadboard: 400 Tie-Points.
Technical Support Is Available At Any Time!.
22Cm Rainbow Ribbon Cable With Socket, Easy To Connect Gpio Breakout With Your Pi..
This Shield Is In A Fancy T-Shape, Coming With 40 Pins, Can Plug Into Any Solderless Breadboard.
Features
- Designed for Raspberry Pi A+/B+/3 B/4/4B
- This shield is in a fancy T-shape, coming with 40 pins, can plug into any solderless breadboard
- High quality Solderless Breadboard: 400 tie-points
- 22cm rainbow ribbon cable with socket, easy to connect GPIO breakout with your Pi.
- Technical support is available at any time!
- See more on Amazon...
Brand: KEYESTUDIO | Manufacturer: keyes
See On Amazon #18
Weewooday 10 Pieces Electret Microphone Amplifier Adjustable MAX4466 Module Microphone Preamplifier Blue Breakout Board Compatible with Arduino
Asin: B08TTM371D | Model: Weewooday-Size Name-P057 | PartNumber: Weewooday-Size Name-P057
20-20Khz Electret Microphone Soldered On: Comes With A 20-20Khz Electret Microphone Soldered On The Board For Audio-Reactive Projects; It Is Recommended To Use The Fft Driver Library, Which Can Take Audio Input And 'Translate' It Into Frequencies.
Power Supply Noise Rejection Function: The Amplifier Has Good Power Supply Noise Rejection.
Easy To Use: Connect Gnd To Ground, Vcc To 2.4-5Vdc; For The Good Performance, Use The 'Quietest' Supply Available (This Would Be The 3.3V Supply).
Parameters: Power Supply Voltage: +2.4V To +5.5V (Can Be Compatible With Stm, Raspberry Pi And Other Development Board Motherboards); Power Supply Rejection Ratio: 112Db; Common Mode Rejection Ratio: 126Db; Avol: 125Db (Rl = 100 Thousands Of Ohm Meter) Rail-To-Rail Output; Quiescent Power Supply Current: Less Than 24 Microamp; Gain Bandwidth: 600Khz.
Features
- Application: the MAX4466 microphone breakout is suitable for voice converters, audio recording and sampling, and audio response projects using FFT; On the back, there is a small trimmer pot to adjust the gain; You can set the gain from 25x to 125x
- Parameters: power supply voltage: +2.4V to +5.5V (can be compatible with STM, Raspberry Pi and other development board motherboards); Power supply rejection ratio: 112dB; Common mode rejection ratio: 126dB; AVOL: 125dB (RL = 100 thousands of ohm meter) rail-to-rail output; Quiescent power supply current: less than 24 microamp; Gain bandwidth: 600kHz
- 20-20KHz electret microphone soldered on: comes with a 20-20KHz electret microphone soldered on the board for audio-reactive projects; It is recommended to use the FFT driver library, which can take audio input and 'translate' it into frequencies
- Easy to use: connect GND to ground, VCC to 2.4-5VDC; For the good performance, use the 'quietest' supply available (this would be the 3.3V supply)
- Power supply noise rejection function: the amplifier has good power supply noise rejection
- See more on Amazon...
Brand: Weewooday | Manufacturer: Weewooday
See On Amazon #19
Electronics-Salon Pi Screw Terminal Block Breakout Module, for Raspberry Pi.
Asin: B01M27459S | Model: MD-D1144-1 | PartNumber: MD-D1144-1 | Ean: 6921407469648
Terminal Block Pitch 3.5Mm/0.138", Wire Size Range 26Awg To 16Awg, Strip Length 5Mm, Screw M2 Steel, Pin Header And Cage Copper..
Note: The Item Not Include Raspberry Pi..
Fr-4 Fiber Glass Pcb, Dual Copper Layers, Pads Grid Pitch 2.54Mm/0.1", Hole Diameter 0.8Mm..
The Item Has Been Soldered And Assembled, With Mounting Screws, Standoffs And Labels..
Features
- Pi Terminal Block Breakout Module - for Raspberry Pi.
- The item has been soldered and assembled, with mounting screws, standoffs and labels.
- Terminal block pitch 3.5mm/0.138, wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper.
- FR-4 fiber glass PCB, dual copper layers, pads grid pitch 2.54mm/0.1, hole diameter 0.8mm.
- NOTE: the item not include Raspberry Pi.
- See more on Amazon...
Brand: Electronics-Salon | Manufacturer: Electronics-Salon
See On Amazon
Looking For Something Else?
Search