SharkBite 3/4 Inch x 100 Feet Blue PEX-A, PEX Pipe Flexible Water Tubing for Plumbing, UA70B100
Asin: B0BNWCC9JK | Model: UA70B100 | PartNumber: UA70B100 | Ean: 0697285058354 | UPC: 697285058354
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Compatibility: Pex-A Tube Is Approved For Use With Pex Expansion (F1960), Push To Connect (Asse 1061), Plastic Crimp (Astm F2159), And Brass Crimp (Astm F1807) Fittings; Approved For Water Service Lines And Burial Applications, Including Being Buried Under Concrete.
Specs: Expandable Pex Tubing Rolls Feature A Minimum Working Temperature Of 33 Degrees F At 160 Psi, And A Maximum Working Temperature 200 Degrees F At 80 Psi; Maximum Working Pressure Is 160 Psi At 33 Degrees F To 70 Degrees F.
Durable: Pex Type A Coil Is Composed Of Strong And Sturdy Polyethylene For Long-Lasting Reliability, Allows For Faster Installation When Compared To Rigid Pipe, Features A 3 Month Uv Resistance, And Is The Highest Rated For Chlorine Resistance.
Flexible And Freeze Resistant: Pex-A Water Line Piping Protects Against Kinking And Features The Highest Rated Flexibility So That It May Easily Bend Around Corners; Flexibility Allows For It To Be Fastened By Cold Expansion, Which Allows The End To Be Fluted Prior To Inserting The Fitting To Accommodate Expansion Style Fittings Which Provide Less Flow Restriction And Can Increase Water Pressure Where Needed.
Features
- PEX A TUBING: Designed for potable hot and cold plumbing applications, this durable and freeze-resistant water supply line piping features the highest rated flexibility, allowing for longer runs and fewer connections while reducing time, cost, and potential leak points
- FLEXIBLE AND FREEZE RESISTANT: PEX-A water line piping protects against kinking and features the highest rated flexibility so that it may easily bend around corners; flexibility allows for it to be fastened by cold expansion, which allows the end to be fluted prior to inserting the fitting to accommodate expansion style fittings which provide less flow restriction and can increase water pressure where needed
- COMPATIBILITY: PEX-A tube is approved for use with PEX expansion (F1960), push to connect (ASSE 1061), plastic crimp (ASTM F2159), and brass crimp (ASTM F1807) fittings; approved for water service lines and burial applications, including being buried under concrete
- DURABLE: PEX type A coil is composed of strong and sturdy polyethylene for long-lasting reliability, allows for faster installation when compared to rigid pipe, features a 3 month UV resistance, and is the highest rated for chlorine resistance
- SPECS: Expandable PEX tubing rolls feature a minimum working temperature of 33 degrees F at 160 PSI, and a maximum working temperature 200 degrees F at 80 PSI; maximum working pressure is 160 PSI at 33 degrees F to 70 degrees F
- See more on Amazon...
Brand: SharkBite | Manufacturer: Reliance Worldwide Corporation
Dimensions: 5.25 x 24.00 x 24.00 inches
See On Amazon Similar To SharkBite 3 4 Inch x
#1
SharkBite 1/2 Inch Disconnect Clip for Push to Connect Brass Plumbing Fittings, U710A
Asin: B00A8HUG1S | Model: U710A | PartNumber: U710A | Ean: 0697285910874 | UPC: 697285910874
Durable And High Quality: Fitting Remover Is Made Of Durable And Lightweight Plastic With Wide Grip Handles By A Name You Know And Trust; Sharkbite's Quality And Performance Are Field-Proven And Trusted In The Plumbing Industry.
Made In The Usa: All Sharkbite Valves, Clips, Joints, And Adapters Are Manufactured And Tested In The Usa.
Preferred By The Pro: Sharkbite Tools And Fittings Meet The Same High Standards For Commercial And Residential Plumbing Applications, Combining Durability And Ease Of Use Suitable For Commercial Repairs Or Home Improvement Projects.
Copper, Pex, Cpvc, Cts, Hdpe: Sharkbite Disconnect Clip Is Compatible With Copper Tubing, Cts, Cpvc, Hdpe, And Pex Fittings, And Connects All Three Types In Any Combination, Ideal For Working In Tight Work Spaces.
Features
- SHARKBITE DISCONNECT CLIP: 1/2 inch disconnect clips allow for universal brass push connect fittings to be disconnected from the pipe quickly and easily; can remove or adjust push to connect fittings with no tools, crimping, glue or soldering required
- COPPER, PEX, CPVC, CTS, HDPE: SharkBite disconnect clip is compatible with copper tubing, CTS, CPVC, HDPE, and PEX fittings, and connects all three types in any combination, ideal for working in tight work spaces
- DURABLE AND HIGH QUALITY: Fitting remover is made of durable and lightweight plastic with wide grip handles by a name you know and trust; SharkBite's quality and performance are field-proven and trusted in the plumbing industry
- PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects
- MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA
- See more on Amazon...
Brand: SharkBite | Manufacturer: Cash Acme
Dimensions: 4.35 x 0.45 x 6.30 inches | Weight: 0.01 Pounds
Warranty: 2 year manufacturer
See On Amazon #2
SharkBite Max 1/2 Inch Coupling, Pack of 4, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, UR008A4
Asin: B0C6BX7NB8 | Model: UR008 | PartNumber: UR008 | Ean: 0697285035294 | UPC: 697285035294
Strong And Durable: Straight Coupling Features A Reinforced Stainless Steel Collar Which Locks In The Cartridge And Provides Additional Strength For 50 Percent Reduction In Insertion Force.
Certified: Water Service Coupling Is Rated To 200 Degrees F And 250 Psi With 2K Maximum Burst.
Lead Free: Straight Coupler Is Made Of High-Quality Forged Dzr Brass With Reinforced Stainless Steel That Is Lead Free; All Sharkbite Pipe Fittings Meet The Same Standards For Commercial And Residential Plumbing Applications.
No Pex Tube Liner: With No Pex Pipe Tube Liner Required, Sharkbite Max Plumbing Fittings Eliminate Flow Restriction When Used On Copper/Cpvc.
Features
- FAST AND EASY INSTALL: SharkBite Max push-to-connect brass pipe connectors are perfect for making easy connections between two pieces of PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe in any combination. No need for soldering, glue, or additional tools; pipe connector can be installed in wet lines
- NO PEX TUBE LINER: With no PEX pipe tube liner required, SharkBite Max plumbing fittings eliminate flow restriction when used on Copper/CPVC
- STRONG AND DURABLE: Straight coupling features a reinforced stainless steel collar which locks in the cartridge and provides additional strength for 50 percent reduction in insertion force
- LEAD FREE: Straight coupler is made of high-quality forged DZR brass with reinforced stainless steel that is lead free; all SharkBite pipe fittings meet the same standards for commercial and residential plumbing applications
- CERTIFIED: Water service coupling is rated to 200 degrees F and 250 PSI with 2K maximum burst
- See more on Amazon...
Brand: SharkBite | Manufacturer: US - Reliance Worldwide Corporation
Dimensions: 1.01 x 2.07 x 1.01 inches | Weight: 0.37 pounds
Warranty: Warranty
See On Amazon #3
SharkBite Max 1/2 Inch 90 Degree Elbow, Pack of 4, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, UR248A4
Asin: B0C6R9JHYS | Model: UR248A4 | PartNumber: UR248A4 | Ean: 0697285056466 | UPC: 697285056466
Strong And Durable: 90 Degree Elbow Coupling Features A Reinforced Stainless Steel Collar Which Locks In The Cartridge And Provides Additional Strength For 50 Percent Reduction In Insertion Force.
Specs: 90 Degree Elbows Can Withstand 200 Degrees F And 250 Psi With 2K Maximum Burst.
Lead Free: 90 Degree Hose Elbow Is Made Of High-Quality Forged Dzr Brass With Reinforced Stainless Steel That Is Lead Free; All Sharkbite Pipe Fittings Meet The Same Standards For Commercial And Residential Plumbing Applications.
No Pex Tube Liner: With No Pex Pipe Tube Liner Required, Sharkbite Max Plumbing Fittings Eliminate Flow Restriction When Used On Copper/Cpvc.
Features
- FAST AND EASY INSTALL: SharkBite Max push to connect brass elbow pipe connectors are perfect for making easy connections between two pieces of PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe in any combination. No need for soldering, glue, or additional tools; elbow pipe connector can be installed in wet lines
- NO PEX TUBE LINER: With no PEX pipe tube liner required, SharkBite Max plumbing fittings eliminate flow restriction when used on Copper/CPVC
- STRONG AND DURABLE: 90 degree elbow coupling features a reinforced stainless steel collar which locks in the cartridge and provides additional strength for 50 percent reduction in insertion force
- LEAD FREE: 90 degree hose elbow is made of high-quality forged DZR brass with reinforced stainless steel that is lead free; all SharkBite pipe fittings meet the same standards for commercial and residential plumbing applications
- SPECS: 90 degree elbows can withstand 200 degrees F and 250 PSI with 2K maximum burst
- See more on Amazon...
Brand: SharkBite | Manufacturer: US Reliance - Worldwide Corporation
Dimensions: 1.01 x 1.95 x 1.95 inches | Weight: 0.10 pounds
See On Amazon #4
SharkBite 1/2 x 3/4 Inch MHT 90 Degree Hose Bibb, Multi Turn, Push To Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 24626LF
Asin: B076FX1M5Y | Model: 24626LF | PartNumber: 24626LF | Ean: 0697285246263 | UPC: 697285246263
Easy To Install: The Innovative Design Of The Sharkbite Brass Push Hose Bibb Allows For Quick And Easy Installation, With No Tools, Crimping, Glue, Or Soldering Required; Can Be Installed In Wet Lines; Remove Using A Disconnect Clip Or Disconnect Tongs.
Made In The Usa: All Sharkbite Valves, Clips, Joints, And Adapters Are Manufactured And Tested In The Usa.
Preferred By The Pro: Sharkbite Tools And Fittings Meet The Same High Standards For Commercial And Residential Plumbing Applications, Combining Durability And Ease Of Use; Ideal For Replacement And New Construction Installation.
Versatile: Brass Push Hose Bibbs Work Well With Pex, Cpvc, Pe-Rt, Sdr-9 Hdpe, And Copper Pipes; Bibb Features A Patented One-Piece 2.4-Inch Diameter Mounting Flange And Inlet Connection.
Features
- SHARKBITE 90-DEGREE HOSE BIBB: Multi-turn shut-off valve with mounting flange and inlet can be used for water flow regulation; ideal for working in tight spaces; combines a 3/4 inch garden hose outlet with a 1/2 inch or 3/4 inch push-to-connect inlet
- VERSATILE: Brass push hose bibbs work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; bibb features a patented one-piece 2.4-inch diameter mounting flange and inlet connection
- EASY TO INSTALL: The innovative design of the SharkBite brass push hose bibb allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines; remove using a disconnect clip or disconnect tongs
- PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use; ideal for replacement and new construction installation
- MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA
- See more on Amazon...
Brand: SharkBite | Manufacturer: Cash Acme
Dimensions: 3.39 x 3.78 x 2.44 inches | Weight: 0.10 pounds
Warranty: Warranty
See On Amazon #5
SharkBite 3/4 Inch x 3/4 Inch 90 Degree Male Adapter Elbow, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U286LFA.
Asin: B00O9K7FZK | Model: U286LFA | PartNumber: U286LFA | Ean: 0697285002623 | UPC: 697285002623
Easy To Install: Elbow Connectors Feature Innovative Push To Connect Technology To Allow For Easy Installation, And Do Not Require Any Additional Tools, Glue, Crimping, Or Soldering.
Certified: Sharkbite Elbow Coupling Is Certified To 200 Psi And 200 Degrees F (93 Degrees C).
Lead Free: 90 Degree Elbow Hose Connector Is Composed Of Durable Lead Free Dzr Brass.
Versatile: Sharkbite Elbow Joint Is Compatible With Pex, Copper, Cpvc, Pe-Rt And Sdr-9 Hdpe Pipe.
Features
- 90 DEGREE MNPT ELBOW: Elbow connector provides a quick and easy transition to an MNPT threaded connection
- VERSATILE: SharkBite elbow joint is compatible with PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe
- EASY TO INSTALL: Elbow connectors feature innovative push to connect technology to allow for easy installation, and do not require any additional tools, glue, crimping, or soldering
- LEAD FREE: 90 degree elbow hose connector is composed of durable lead free DZR brass
- CERTIFIED: SharkBite elbow coupling is certified to 200 PSI and 200 degrees F (93 degrees C)
- See more on Amazon...
Brand: SharkBite | Manufacturer: Reliance Worldwide Corporation
Dimensions: 2.04 x 1.27 x 2.19 inches | Weight: 0.20 pounds
Warranty: 25 year manufacturer
See On Amazon #6
SharkBite 1/2 Inch Stop Valve with Drain and Vent, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 24634LF
Asin: B075K69NYQ | Model: 24634LF | PartNumber: 24634LF | Ean: 0697285246348 | UPC: 697285246348
Easy To Install: The Innovative Sharkbite Brass Push Stop Valve With Drain Allows For Quick And Easy Installation, With No Tools, Crimping, Glue, Or Soldering Required; Can Be Installed In Wet Lines; Remove Using A Disconnect Clip Or Disconnect Tongs.
Made In The Usa: All Sharkbite Valves, Clips, Joints, And Adapters Are Manufactured And Tested In The Usa.
Preferred By The Pro: Sharkbite Tools And Fittings Meet The Same High Standards For Commercial And Residential Plumbing Applications, Combining Durability And Ease Of Use.
Versatile: Brass Push Stop Valves Work Well With Pex, Cpvc, Pe-Rt, Sdr-9 Hdpe, And Copper Pipes; Features A Durable Forged Body For Strength.
Features
- SHARKBITE BRASS PUSH STOP VALVE WITH DRAIN/VENT: Multi-turn valves can be used for water flow regulation; valves feature an integrated drain or vent for easy cold-weather maintenance and protection against freezing; ideal for working in tight spaces
- VERSATILE: Brass push stop valves work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; features a durable forged body for strength
- EASY TO INSTALL: The innovative SharkBite brass push stop valve with drain allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines; remove using a disconnect clip or disconnect tongs
- PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use
- MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA
- See more on Amazon...
Brand: SharkBite | Manufacturer: Cash Acme
Dimensions: 3.01 x 2.38 x 2.92 inches | Weight: 0.46 pounds
Warranty: Warranty
See On Amazon #7
SharkBite 3/4 Inch x 100 Feet Red PEX-B, PEX Pipe Flexible Water Tubing for Plumbing, U870R100
Asin: B003OANH6W | Model: U870R100 | PartNumber: U870R100 | Ean: 0784497435384, 0697285351004, 0754262119276 | UPC: 697285351004, 754262119276, 784497435384
Easy To Install: The Innovative Push-To-Connect Design Of The Sharkbite Brass Pex Water Tubing Offers Faster Installation Compared To Rigid Pipe, Six-Month Uv Resistance, And The Highest-Rated Chlorine Resistance.
Specs: Sharkbite Water Pipe Tubing Features A Minimum Working Temperature Of 33 Degrees F At 160 Psi, A Maximum Working Temperature Of 200 Degrees F At 80 Psi, And A Maximum Working Pressure Of 160 Psi At 33 To 70 Degrees F.
Preferred By The Pro: This Portable Pex Pipe Is Certified To Meet Astm F2023 Oxidative-Resistance Requirements For Continuous Hot Water Recirculation; Approved For Water Service Lines And Burial Applications Including Being Buried Under Concrete.
Freeze Resistant: This Flexible Pex Tubing Expands And Contracts As Water Freezes And Thaws Within The Pipe; Ideal For Hot And Cold Potable Water Distribution, Fire Protection, And Municipal Water Service Lines.
Features
- SHARKBITE RED PEX-B PIPE: This SharkBite red PEX-B pipe is available in coils up to 1,000 feet in length, allowing longer runs and fewer connections to save time, money, and potential leak points
- FREEZE RESISTANT: This flexible PEX tubing expands and contracts as water freezes and thaws within the pipe; ideal for hot and cold potable water distribution, fire protection, and municipal water service lines
- EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass PEX water tubing offers faster installation compared to rigid pipe, six-month UV resistance, and the highest-rated chlorine resistance
- PREFERRED BY THE PRO: This portable PEX pipe is certified to meet ASTM F2023 oxidative-resistance requirements for continuous hot water recirculation; approved for water service lines and burial applications including being buried under concrete
- SPECS: SharkBite water pipe tubing features a minimum working temperature of 33 degrees F at 160 PSI, a maximum working temperature of 200 degrees F at 80 PSI, and a maximum working pressure of 160 PSI at 33 to 70 degrees F
- See more on Amazon...
Brand: SharkBite | Manufacturer: Cash Acme
Dimensions: 30.00 x 5.00 x 30.00 Inches | Weight: 10.30 Pounds
Warranty: Limited 25 Year
See On Amazon #8
SharkBite Max 1/2 x 18 Inch Flexible Repair Coupling Hose, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, UR3008FX18
Asin: B0C51PSS7M | Model: UR3008FX18 | PartNumber: UR3008FX18 | Ean: 0697285082144 | UPC: 697285082144
Strong And Durable: The Reinforced Stainless Steel Collar Locks In The Cartridge And Provides Additional Strength For 50 Percent Reduction In Insertion Force.
Certified: Repair Coupling Hoses Are Rated To 200 Degrees F And 250 Psi With 2K Maximum Burst.
Lead Free: Flex Coupling Hose Is Made Of High-Quality Forged Dzr Brass With Reinforced Stainless Steel That Is Lead Free; All Sharkbite Pipe Fittings Meet The Same Standards For Commercial And Residential Plumbing Applications.
No Pex Tube Liner: With No Pex Pipe Tube Liner Required, Sharkbite Max Plumbing Fittings Eliminate Flow Restriction When Used On Copper/Cpvc.
Features
- FAST AND EASY INSTALL: SharkBite Max push-to-connect brass pipe connectors are perfect for making quick repairs and installation to existing water lines and connect between two pieces of PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe in any combination. No need for soldering, glue, or additional tools; pipe connector can be installed in wet lines
- NO PEX TUBE LINER: With no PEX pipe tube liner required, SharkBite Max plumbing fittings eliminate flow restriction when used on Copper/CPVC
- STRONG AND DURABLE: The reinforced stainless steel collar locks in the cartridge and provides additional strength for 50 percent reduction in insertion force
- LEAD FREE: Flex coupling hose is made of high-quality forged DZR brass with reinforced stainless steel that is lead free; all SharkBite pipe fittings meet the same standards for commercial and residential plumbing applications
- CERTIFIED: Repair coupling hoses are rated to 200 degrees F and 250 PSI with 2K maximum burst
- See more on Amazon...
Brand: SharkBite | Manufacturer: Reliance Worldwide Corporation
Dimensions: 1.03 x 17.82 x 1.03 inches | Weight: 0.52 pounds
See On Amazon #9
SharkBite Max 1/2 x 1/2 x 1/4 Inch Compression Tee Stop Valve, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, UR24983A
Asin: B0CNTJ7DG5 | Model: UR24983A | PartNumber: UR24983A | Ean: 0697285069787 | UPC: 697285069787
Easy To Install: This Innovative Stop Valve Features A Quarter-Turn Full-Port Brass Ball Valve That Allows For Easy On/Off Control Of The Supply Line; No Special Tools, Crimping, Glue, Or Soldering Needed; Can Be Installed In Wet Lines.
Certified: Service Stop Valves Are Rated To 160 Degrees F And 125 Psi.
Preferred By The Pro: Sharkbite Tools And Fittings Meet The Same High Standards For Commercial And Residential Plumbing Applications, Combining Durability And Ease Of Use; Feature A Sleek Chrome Finish For An Attractive Appearance.
Versatile: Brass Push Tee Stop Fittings Work Well With Pex, Cpvc, Pe-Rt, Sdr-9 Hdpe, And Copper Pipes; Can Be Rotated For Easier And Faster Installation.
Features
- BRASS PUSH TEE STOP VALVE: Brass push tee stop valves are used to add supply lines to fixtures and appliances such as dishwashers, humidifiers, and ice makers; ideal for working in tight spaces; remove using a disconnect clip or disconnect tongs
- VERSATILE: Brass push tee stop fittings work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; can be rotated for easier and faster installation
- EASY TO INSTALL: This innovative stop valve features a quarter-turn full-port brass ball valve that allows for easy on/off control of the supply line; no special tools, crimping, glue, or soldering needed; can be installed in wet lines
- PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use; feature a sleek chrome finish for an attractive appearance
- CERTIFIED: Service stop valves are rated to 160 degrees F and 125 PSI
- See more on Amazon...
Brand: SharkBite | Manufacturer: US Reliance - Worldwide Corporation
Dimensions: 0.10 x 2.87 x 1.56 inches
See On Amazon #10
SharkBite Max 3/4 Inch 90 Degree Elbow, Pack of 4, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U256LFA
Asin: B0CNTM7HDT | Model: UR256A4 | PartNumber: UR256A4 | Ean: 0697285057272 | UPC: 697285057272
Strong And Durable: The Reinforced Stainless Steel Collar Locks In The Cartridge And Provides Additional Strength For 50 Percent Reduction In Insertion Force.
Certified: Pushfit Elbows Are Rated To 200 Degrees F And 250 Psi With 2K Maximum Burst.
Lead Free: Flex 90-Degree Elbow Is Made Of High-Quality Forged Dzr Brass With Reinforced Stainless Steel That Is Lead Free; All Sharkbite Pipe Fittings Meet The Same Standards For Commercial And Residential Plumbing Applications.
No Pex Tube Liner: With No Pex Pipe Tube Liner Required, Sharkbite Max Plumbing Fittings Eliminate Flow Restriction When Used On Copper/Cpvc.
Features
- FAST AND EASY INSTALL: SharkBite Max push-to-connect brass push elbows are perfect for making easy 90-degree connections between two different-sized PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipes in any combination. No need for soldering, glue, or additional tools; pipe connector can be installed in wet lines
- NO PEX TUBE LINER: With no PEX pipe tube liner required, SharkBite Max plumbing fittings eliminate flow restriction when used on Copper/CPVC
- STRONG AND DURABLE: The reinforced stainless steel collar locks in the cartridge and provides additional strength for 50 percent reduction in insertion force
- LEAD FREE: Flex 90-degree elbow is made of high-quality forged DZR brass with reinforced stainless steel that is lead free; all SharkBite pipe fittings meet the same standards for commercial and residential plumbing applications
- CERTIFIED: Pushfit elbows are rated to 200 degrees F and 250 PSI with 2K maximum burst
- See more on Amazon...
Brand: SharkBite | Manufacturer: US Reliance - Worldwide Corporation
Dimensions: 0.10 x 1.50 x 4.87 inches
See On Amazon #11
SharkBite Max 1/2 Inch Ball Valve with Drain Vent and Mounting Bracket, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, UR24615A
Asin: B0C14XR6T2 | Model: UR24615A | PartNumber: UR24615A | Ean: 0697285069688 | UPC: 697285069688
Strong And Durable: The Reinforced Stainless Steel Collar Locks In The Cartridge And Provides Additional Strength For 50 Percent Reduction In Insertion Force.
Certified: Ball Valves With Drain And Mounting Tab Are Rated To 200 Degrees F And 250 Psi With 2K Maximum Burst.
Lead Free: This Ball Valve Is Made Of High-Quality Forged Dzr Brass With Reinforced Stainless Steel That Is Lead Free; All Sharkbite Pipe Fittings Meet The Same Standards For Commercial And Residential Plumbing Applications.
No Pex Tube Liner: With No Pex Pipe Tube Liner Required, Sharkbite Max Plumbing Fittings Eliminate Flow Restriction When Used On Copper/Cpvc.
Features
- FAST AND EASY INSTALL: SharkBite Max push-to-connect brass push ball valves are perfect for making quick transitions between a PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipes in any combination. No need for soldering, glue, or additional tools; pipe connector can be installed in wet lines
- NO PEX TUBE LINER: With no PEX pipe tube liner required, SharkBite Max plumbing fittings eliminate flow restriction when used on Copper/CPVC
- STRONG AND DURABLE: The reinforced stainless steel collar locks in the cartridge and provides additional strength for 50 percent reduction in insertion force
- LEAD FREE: This ball valve is made of high-quality forged DZR brass with reinforced stainless steel that is lead free; all SharkBite pipe fittings meet the same standards for commercial and residential plumbing applications
- CERTIFIED: Ball valves with drain and mounting tab are rated to 200 degrees F and 250 PSI with 2K maximum burst
- See more on Amazon...
First Available: 05/11/2023
Brand: SharkBite | Manufacturer: Reliance Worldwide Corporation
Dimensions: 1.91 x 5.46 x 2.34 Inches
See On Amazon #12
SharkBite 4 Inch Frost Free Sillcock, 1/2 x 3/4 Inch MHT, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, 25743LF
Asin: B085WS6FRP | Model: 25743LF | PartNumber: 25743LF | Ean: 0697285257436 | UPC: 697285257436
Easy To Install: This Intuitive Sharkbite Brass Push Frost-Free Sillcock Allows For Quick And Easy Installation, With No Tools, Crimping, Glue, Or Soldering Required; Can Be Installed In Wet Lines; Remove Using A Disconnect Clip Or Disconnect Tongs.
Secured: The Sharkbite Frost-Free Sillcock Features An Integrated Vacuum Breaker To Prevent Backflow And A Mounting Flange To Secure The Valve.
Preferred By The Pro: Sharkbite Tools And Fittings Meet The Same High Standards For Commercial And Residential Plumbing Applications; Approved For Behind-The-Wall Applications With No Access Panels.
Versatile: Push-To-Connect Sillcocks Work Well With Pex, Cpvc, Pe-Rt, Sdr-9 Hdpe, And Copper Pipes; Ideal For Working In Tight Spaces.
Features
- SHARKBITE FROST FREE SILLCOCK: Outside faucet valve features an integrated 1/2 inch push-fit inlet and 3/4 inch garden hose outlet; a shut-off can be found at the inlet of the sillcock to drain the water and provide protection for the valve when freezing
- VERSATILE: Push-to-connect sillcocks work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; ideal for working in tight spaces
- EASY TO INSTALL: This intuitive SharkBite brass push frost-free sillcock allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines; remove using a disconnect clip or disconnect tongs
- PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications; approved for behind-the-wall applications with no access panels
- SECURED: The SharkBite frost-free sillcock features an integrated vacuum breaker to prevent backflow and a mounting flange to secure the valve
- See more on Amazon...
Brand: SharkBite | Manufacturer: Cash Acme
Dimensions: 1.78 x 8.75 x 2.67 inches
See On Amazon #13
SharkBite Max 3/4 Inch MNPT Adapter, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, UR134A
Asin: B0CXJFMSWZ | Model: UR134A | PartNumber: UR134A | Ean: 0697285047921 | UPC: 697285047921
Strong And Durable: The Reinforced Stainless Steel Collar Locks In The Cartridge And Provides Additional Strength For 50 Percent Reduction In Insertion Force.
Certified: Pushfit Male Adapters Are Rated To 200 Degrees F And 250 Psi With 2K Maximum Burst.
Lead Free: Flex Male Adapter Is Made Of High-Quality Forged Dzr Brass With Reinforced Stainless Steel That Is Lead Free; All Sharkbite Pipe Fittings Meet The Same Standards For Commercial And Residential Plumbing Applications.
No Pex Tube Liner: With No Pex Pipe Tube Liner Required, Sharkbite Max Plumbing Fittings Eliminate Flow Restriction When Used On Copper/Cpvc.
Features
- FAST AND EASY INSTALL: SharkBite Max push-to-connect brass push male adapters are perfect for making easy transitions between CTS pipe to an FNPT threaded connections and quick connections to a PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe in any combination. No need for soldering, glue, or additional tools; pipe connector can be installed in wet lines
- NO PEX TUBE LINER: With no PEX pipe tube liner required, SharkBite Max plumbing fittings eliminate flow restriction when used on Copper/CPVC
- STRONG AND DURABLE: The reinforced stainless steel collar locks in the cartridge and provides additional strength for 50 percent reduction in insertion force
- LEAD FREE: Flex male adapter is made of high-quality forged DZR brass with reinforced stainless steel that is lead free; all SharkBite pipe fittings meet the same standards for commercial and residential plumbing applications
- CERTIFIED: Pushfit male adapters are rated to 200 degrees F and 250 PSI with 2K maximum burst
- See more on Amazon...
Brand: SharkBite | Manufacturer: Reliance Worldwide Corporation
Dimensions: 1.32 x 2.09 x 1.32 inches
See On Amazon #14
SharkBite 3/4 Inch Push-to-Connect x 1 Inch MNPT High Flow Water Filter Installation Kit, 24660LF
Asin: B09FFPRQ89 | Model: 24660LF | PartNumber: 24660LF | Ean: 0697285246607 | UPC: 697285246607
Compatible With Tight Spaces: Hard Water Filter Installation Kit Ideal For Use In Tight Work Spaces.
Durable: Hot Water Heater Filter Installation Kit Is Corrosion Resistant For Long Lasting Durability And Reliability.
Versatile: Hard Water Filter System Installation Kit Compatible With Any Combination Of Copper, Pe-Rt, Cpvc, And Pex Pipes.
Easy To Use: Water Heater Filter System Installation Kit Features An Innovative Push-To-Connect Design Which Allows For Quick And Easy Installation; No Tools, Glue, Crimping Or Soldering Required.
Features
- WATER FILTRATION SYSTEM INSTALLATION KIT: Water filter installation kit provides everything you need to install a high flow filtration system in your home; includes adapters and disconnect clip
- EASY TO USE: Water heater filter system installation kit features an innovative push-to-connect design which allows for quick and easy installation; no tools, glue, crimping or soldering required
- COMPATIBLE WITH TIGHT SPACES: Hard water filter installation kit ideal for use in tight work spaces
- VERSATILE: Hard water filter system installation kit compatible with any combination of copper, PE-RT, CPVC, and PEX Pipes
- DURABLE: Hot water heater filter installation kit is corrosion resistant for long lasting durability and reliability
- See more on Amazon...
Brand: SharkBite | Manufacturer: Reliance Worldwide Corporation
Dimensions: 1.67 x 8.00 x 4.87 inches | Weight: 0.26 pounds
See On Amazon #15
SharkBite 1/2 Inch Push Cap, Pack of 4, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U514LFA4
Asin: B01N0RL7KQ | Model: U514LFA4 | PartNumber: U514LFA4 | Ean: 0697285023987 | UPC: 697285023987
Easy To Install: The Innovative Push-To-Connect Design Of The Sharkbite Plug End Caps Allows For Quick And Easy Installation, With No Tools, Crimping, Glue, Or Soldering Required; Can Be Installed In Wet Lines.
Specs: Made With Dzr Forged Brass, This Push End Stop Can Withstand 200 Degrees F And 200 Psi.
Preferred By The Pro: Sharkbite Tools And Fittings Meet The Same High Standards For Commercial And Residential Plumbing Applications, Combining Durability And Ease Of Use Suitable For Commercial Repairs Or Home Improvement Projects; Approved For Underground And Behind-The-Wall Applications With No Access Panels.
Versatile: Pushfit End Caps Work Well With Pex, Cpvc, Pe-Rt, Sdr-9 Hdpe, And Copper Pipes; Large Diameter Fittings (1-1/4 In. To 2 In.) Require A Stiffener When Connecting To Pex Pipe.
Features
- SHARKBITE BRASS PUSH CAP: This push-to-connect fitting allows you to plug the end of a pipe quickly and easily; ideal for working in tight spaces **Remove using a disconnect clip or disconnect tongs**
- VERSATILE: Pushfit end caps work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; large diameter fittings (1-1/4 in. to 2 in.) require a Stiffener when connecting to PEX pipe
- EASY TO INSTALL: The innovative push-to-connect design of the SharkBite Plug End Caps allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines
- PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for commercial repairs or home improvement projects; approved for underground and behind-the-wall applications with no access panels
- SPECS: Made with DZR forged brass, this push end stop can withstand 200 degrees F and 200 PSI
- See more on Amazon...
Brand: SharkBite | Manufacturer: Reliance Worldwide Corporation
Dimensions: 0.50 x 0.50 x 1.10 inches | Weight: 0.07 Pounds
Warranty: Manufacturer
See On Amazon #16
SharkBite 1/2 x 1/2 Inch FNPT Adapter, Pack of 4, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U072LFA4
Asin: B01N0RL7H9 | Model: U072LFA4 | PartNumber: U072LFA4 | Ean: 0697285023963 | UPC: 697285023963
Easy To Install: The Innovative Push-To-Connect Design Of The Sharkbite Push Female Adapters Allows For Quick And Easy Installation, With No Tools, Crimping, Glue, Or Soldering Required; Can Be Installed In Wet Lines.
Specs: Made With Dzr Forged Brass, This Female Adapter Can Withstand 200 Degrees F And 200 Psi.
Preferred By The Pro: Sharkbite Tools And Fittings Meet The Same High Standards For Commercial And Residential Plumbing Applications, Combining Durability And Ease Of Use Suitable For Underground And Behind-The-Wall Applications With No Access Panels.
Versatile: Pushfit Female Connectors Work Well With Pex, Cpvc, Pe-Rt, Sdr-9 Hdpe, And Copper Pipes; Large Diameter Fittings (1-1/4 Inches To 2 Inches) Require A Stiffener When Connecting To Pex Pipe.
Features
- SHARKBITE BRASS PUSH FEMALE ADAPTER: This push-to-connect fitting allows you to make a transition between a pipe and an MNPT thread quickly and easily; ideal for working in tight spaces; remove using a disconnect clip or disconnect tongs
- VERSATILE: Pushfit female connectors work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes; large diameter fittings (1-1/4 inches to 2 inches) require a Stiffener when connecting to PEX pipe
- EASY TO INSTALL: The innovative push-to-connect design of the SharkBite push female adapters allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines
- PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for underground and behind-the-wall applications with no access panels
- SPECS: Made with DZR forged brass, this female adapter can withstand 200 degrees F and 200 PSI
- See more on Amazon...
Brand: SharkBite | Manufacturer: Reliance Worldwide Corporation
Dimensions: 0.50 x 0.50 x 1.60 Inches | Weight: 0.16 pounds
See On Amazon #17
SharkBite 1/4 Inch (3/8 Inch OD) x 1/2 Inch NPSM Faucet Connector, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U3525LFA
Asin: B0052LCQDQ | Model: U3525LFA | PartNumber: U3525LFA | Ean: 0697285008076, 0731840710674 | UPC: 697285008076, 731840710674
Easy To Install: The Innovative Push-To-Connect Design Of The Sharkbite Brass Push Faucet Coupler Allows For Quick And Easy Installation, With No Tools, Crimping, Glue, Or Soldering Required; Can Be Installed In Wet Lines.
Specs: Made With Dzr Forged Brass, This Brass Faucet Connector Can Withstand 200 Degrees F And 200 Psi.
Preferred By The Pro: Sharkbite Tools And Fittings Meet The Same High Standards For Commercial And Residential Plumbing Applications, Combining Durability And Ease Of Use; Suitable For Kitchen And Bath Faucet Installations.
Versatile: Pushfit Faucet Connectors Work Well With Pex, Cpvc, Pe-Rt, And Copper Pipes.
Features
- SHARKBITE BRASS PUSH FAUCET CONNECTOR: This SharkBite brass faucet connector features a 1/4 inch SharkBite push-to-connect end and a 1/2 inch female faucet connector on the other end; ideal for working in tight spaces; remove using a disconnect clip
- VERSATILE: Pushfit faucet connectors work well with PEX, CPVC, PE-RT, and copper pipes
- EASY TO INSTALL: The innovative push-to-connect design of the SharkBite brass push faucet coupler allows for quick and easy installation, with no tools, crimping, glue, or soldering required; can be installed in wet lines
- PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use; suitable for kitchen and bath faucet installations
- SPECS: Made with DZR forged brass, this brass faucet connector can withstand 200 degrees F and 200 PSI
- See more on Amazon...
Brand: SharkBite | Manufacturer: Cash Acme
Dimensions: 1.61 x 1.61 x 1.40 inches | Weight: 0.09 pounds
Warranty: Warranty
See On Amazon #18
SharkBite Max 1/2 Inch Tee, Pack of 4, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U362LFA
Asin: B0CNTKCG3W | Model: UR362A4 | PartNumber: UR362A4 | Ean: 0697285059641 | UPC: 697285059641
Strong And Durable: The Reinforced Stainless Steel Collar Locks In The Cartridge And Provides Additional Strength For 50 Percent Reduction In Insertion Force.
Certified: Pushfit Tee Couplers Are Rated To 200 Degrees F And 250 Psi With 2K Maximum Burst.
Lead Free: Tee Coupling Is Made Of High-Quality Forged Dzr Brass With Reinforced Stainless Steel That Is Lead Free; All Sharkbite Pipe Fittings Meet The Same Standards For Commercial And Residential Plumbing Applications.
No Pex Tube Liner: With No Pex Pipe Tube Liner Required, Sharkbite Max Plumbing Fittings Eliminate Flow Restriction When Used On Copper/Cpvc.
Features
- FAST AND EASY INSTALL: SharkBite Max push-to-connect brass push tee couplings are perfect for making easy connections between same-sized PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipes in any combination. No need for soldering, glue, or additional tools; pipe connector can be installed in wet lines
- NO PEX TUBE LINER: With no PEX pipe tube liner required, SharkBite Max plumbing fittings eliminate flow restriction when used on Copper/CPVC
- STRONG AND DURABLE: The reinforced stainless steel collar locks in the cartridge and provides additional strength for 50 percent reduction in insertion force
- LEAD FREE: Tee coupling is made of high-quality forged DZR brass with reinforced stainless steel that is lead free; all SharkBite pipe fittings meet the same standards for commercial and residential plumbing applications
- CERTIFIED: Pushfit tee couplers are rated to 200 degrees F and 250 PSI with 2K maximum burst
- See more on Amazon...
Brand: SharkBite | Manufacturer: US Reliance - Worldwide Corporation
Dimensions: 0.10 x 1.16 x 4.87 inches
See On Amazon #19
SharkBite 1/2 x 3/8 Inch Compression Dual Outlet Angle Stop Valve, Quarter Turn, Push to Connect Brass Plumbing Fitting, PEX Pipe, PE-RT, CPVC, Copper Pipe, 25558LF
Asin: B0764DV9ZS | Model: 25558LF | PartNumber: 25558LF | Ean: 0697285031647 | UPC: 697285031647
Easy To Install: This Innovative Stop Valve Features A 1/2-Inch Push-To-Connect Inlet And Two 3/8-Inch Compression Outlets For Quick Installation; Features A Quarter-Turn Full-Port Brass Ball Valve For Easy Operation; No Special Tools, Crimping, Glue, Or Soldering Needed; Can Be Installed In Wet Lines.
Made In The Usa: All Sharkbite Valves, Clips, Joints, And Adapters Are Manufactured And Tested In The Usa.
Preferred By The Pro: Sharkbite Tools And Fittings Meet The Same High Standards For Commercial And Residential Plumbing Applications, Combining Durability And Ease Of Use; Feature A Sleek Chrome Finish For An Attractive Appearance.
Versatile: Brass Push Angle Stop Fittings Work Well With Pex, Cpvc, Pe-Rt, Sdr-9 Hdpe, And Copper Pipes.
Features
- SHARKBITE BRASS PUSH DUAL OUTLET ANGLE STOP VALVE: Brass push angle stop valves are used to control and shut off water flow to fixtures or appliances for maintenance and repair; ideal for working in tight spaces; remove using a disconnect clip or disconnect tongs
- VERSATILE: Brass push angle stop fittings work well with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes
- EASY TO INSTALL: This innovative stop valve features a 1/2-inch push-to-connect inlet and two 3/8-inch compression outlets for quick installation; features a quarter-turn full-port brass ball valve for easy operation; no special tools, crimping, glue, or soldering needed; can be installed in wet lines
- PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use; feature a sleek chrome finish for an attractive appearance
- MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA
- See more on Amazon...
Brand: SharkBite | Manufacturer: Cash Acme
Dimensions: 7.00 x 5.00 x 1.50 inches | Weight: 0.32 Pounds
Warranty: Warranty
See On Amazon #20
SharkBite Max 3/4 Inch x 3/4 Inch FIP x 18 Inch Stainless Steel Braided Flexible Water Heater Connector, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, UR3088FX18
Asin: B0C51QFLTT | Model: UR3088FX18 | PartNumber: UR3088FX18 | Ean: 0697285082342 | UPC: 697285082342
Strong And Durable: The Reinforced Stainless Steel Collar Locks In The Cartridge And Provides Additional Strength For 50 Percent Reduction In Insertion Force.
Certified: Water Heater Hose Tubings Are Rated To 200 Degrees F And 250 Psi With 2K Maximum Burst.
Lead Free: Flex Water Heater Hose Is Made Of High-Quality Forged Dzr Brass With Reinforced Stainless Steel That Is Lead Free; All Sharkbite Pipe Fittings Meet The Same Standards For Commercial And Residential Plumbing Applications.
No Pex Tube Liner: With No Pex Pipe Tube Liner Required, Sharkbite Max Plumbing Fittings Eliminate Flow Restriction When Used On Copper/Cpvc.
Features
- FAST AND EASY INSTALL: SharkBite Max push-to-connect brass push water heater connectors are perfect for making quick connections between a water heater and an existing PEX, copper, CPVC, PE-RT and SDR-9 HDPE pipe in any combination. No need for soldering, glue, or additional tools; pipe connector can be installed in wet lines
- NO PEX TUBE LINER: With no PEX pipe tube liner required, SharkBite Max plumbing fittings eliminate flow restriction when used on Copper/CPVC
- STRONG AND DURABLE: The reinforced stainless steel collar locks in the cartridge and provides additional strength for 50 percent reduction in insertion force
- LEAD FREE: Flex water heater hose is made of high-quality forged DZR brass with reinforced stainless steel that is lead free; all SharkBite pipe fittings meet the same standards for commercial and residential plumbing applications
- CERTIFIED: Water heater hose tubings are rated to 200 degrees F and 250 PSI with 2K maximum burst
- See more on Amazon...
Brand: SharkBite | Manufacturer: Reliance Worldwide Corporation
Dimensions: 1.31 x 18.45 x 1.31 Inches | Weight: 0.60 pounds
Warranty: Warranty
See On Amazon
Looking For Something Else?
Search