1/8'' - 2'' BSP Male Thread Square Raised Plug 316 Stainless Steel End Cap Water Pipe Fitting 316L Joint Connector (Color : 316L, Size : 1-1/2")
Asin: B0BP798SF3 | Ean: 8182434558257
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Temperature Resistance: -50~300.
Applicable Medium: Water, Gas, Oil, Etc..
Pressure Resistance: 150Lp.
Color: Primary Color.
Features
- Material: SS316
- Color: Primary Color
- Temperature Resistance: -50~300
- Pressure Resistance: 150LP
- Applicable Medium: Water, Gas, Oil, etc.
- See more on Amazon...
Brand: CUREOL | Manufacturer: CUREOL
Weight: 0.00 Pounds
See On Amazon Similar To 1 8'' 2'' BSP Male
#1
USSKYBOY Pressure Washer Chemical Soap Injector Kit for Briggs & Stratton, Homelite, Ryobi & Husky Replaces 190593GS 190635GS & 203640GS (2 Set)
Asin: B0BDM92ST6 | Model: 190593GS | PartNumber: 190593GS
【Function】 If Parts On Your High Pressure Washer Pump Are Worn, Rusted, Or Clogged With Hard Water Deposits, You Can Replace It With This Set. This Will Make Your High Pressure Washer Pump Smoother To Use..
【Satisfaction Guarantee】 Provides A 100% Satisfied After-Sales Service. If You Are Not Satisfied With It, Simply Return It Within 30 Days For A Full Refund. Premium Support 1 Year Warranty..
【Package Contains】 The 190593Gs Chemical Injector Kit Including 2 Brass Barbs, 2 Check Valve Balls, 2 Springs, 2 O-Rings (2 Set)..
【Replacement Method】 Remove The Old Fuel Injector With A Wrench. Remove Any Sticky Or Dry Soap From The Container. Make Sure The Rubber O-Ring Is On The Injector As Shown. Put The Ball Bearing In The Injector, And Then Use The Spring On The Small End Of The Spring Against The Ball Bearing. Insert The Injector Into The Socket And Use A 13Mm Wrench To Tighten The Injector. Do Not Overtighten Or It Will Damage The O-Rings Or Crack The White Metal On The Pump..
Features
- Compatible Pressure Washer Soap Syringe Kit is compatible with pumps 190593GS, 190635GS and 203640GS. (1/8'' -27 BSP male thread)
- Replacement method Remove the old fuel injector with a wrench. Remove any sticky or dry soap from the container. Make sure the rubber o-ring is on the injector as shown. Put the ball bearing in the injector, and then use the spring on the small end of the spring against the ball bearing. Insert the injector into the socket and use a 13mm wrench to tighten the injector. Do not overtighten or it will damage the o-rings or crack the white metal on the pump.
- Function If parts on your high pressure washer pump are worn, rusted, or clogged with hard water deposits, you can replace it with this set. This will make your high pressure washer pump smoother to use.
- Package contains The 190593GS chemical injector kit including 2 brass barbs, 2 check valve balls, 2 springs, 2 O-rings (2 set).
- Satisfaction Guarantee Provides a 100% satisfied after-sales service. If you are not satisfied with it, simply return it within 30 days for a full refund. Premium Support 1 year Warranty.
- See more on Amazon...
Brand: USSKYBOY | Manufacturer: USSKYBOY
Dimensions: 0.60 x 0.95 x 0.60 Inches
See On Amazon #2
5 Piece NPT Thread Forming Taps, Pipe Taps Set, High-speed Steel Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads, Size 1/8", 1/4", 3/8", 1/2", 3/4" in Storage Box
Asin: B085T4RP4C | Model: pipe-taps | PartNumber: pipe-taps | Ean: 0194999183353 | UPC: 194999183353
Versatile Set Suitable For Both Personal And Professional Use. Clean And Re-Thread Damaged Or Jam Pipe Threads With Ease - Ideal For Pipe Fittings, Diyers, Handymen, And Professionals Who Need To Repair Damaged Pipe Threads. Revive Damaged Pipe Threads With Precision Using Our 5-Piece High-Speed Steel Npt Pipe Taps Set..
Uncoated Tools For Versatile Use: Uncoated Tools Feature Just The Base Substrate Without Any Additional Treatment Or Coatings. Our Uncoated Pipe Taps Set Are Suitable For A Wide Range Of Applications, And The Straight Flute Design Allows Chips To Collect In The Flutes As They Cut..
Npt And Bsp Available - Perfect For Cuts Internal Threads In Pipes. Durable And Harder Than Carbon Steel - Our Gcr15 Material Makes All The Difference. With A Round Shank And Square End, Our Pipe Taps Are Well-Suited For Most Applications In Shallow Cuts. Upgrade Your Pipe Threading Game Today With Our Composite Steel Pipe Taps Set..
Tool Storage Box: The 5-Piece Set Includes All The Sizes You Need For Clean And Re-Threading Damaged Or Jam Pipe Threads, And The Storage Box Makes For Easy Organization And Transport. Includes Size Of: 1/8" - 27 Npt, 1/4" - 18 Npt, 3/8" - 18 Npt, 1/2" - 14 Npt, 3/4" - 14 Npt.
Features
- Durable materials: Upgrade Your Pipe Threading game with Our Composite Steel Pipe Taps Set. Ditch your old, carbon steel pipe taps and upgrade to our composite steel (GCR15) pipe taps set. With a higher hardness level than traditional carbon steel, our pipe taps are more durable and long-lasting.
- Tool Storage Box: The 5-piece set includes all the sizes you need for clean and re-threading damaged or jam pipe threads, and the Storage Box makes for easy organization and transport. Includes size of: 1/8 - 27 npt, 1/4 - 18 npt, 3/8 - 18 npt, 1/2 - 14 npt, 3/4 - 14 npt
- Versatile set suitable for both personal and professional use. Clean and Re-Thread Damaged or Jam Pipe Threads with Ease - Ideal for Pipe Fittings, DIYers, handymen, and professionals who need to repair damaged pipe threads. Revive Damaged Pipe Threads with Precision Using Our 5-Piece High-Speed Steel NPT Pipe Taps Set.
- NPT and BSP Available - Perfect for Cuts Internal Threads in Pipes. Durable and Harder Than Carbon Steel - Our GCR15 Material Makes All the Difference. With a round shank and square end, our pipe taps are well-suited for most applications in shallow cuts. Upgrade your pipe threading game today with our composite steel pipe taps set.
- Uncoated Tools for Versatile Use: Uncoated tools feature just the base substrate without any additional treatment or coatings. Our uncoated Pipe Taps Set are suitable for a wide range of applications, and the straight flute design allows chips to collect in the flutes as they cut.
- See more on Amazon...
Brand: WMAZtool | Manufacturer: WM077
Dimensions: 1.50 x 5.40 x 3.50 inches
See On Amazon #3
YELUN Solid brass Garden Hose Fittings Connectors Adapter Heavy Duty Brass Repair Male to Male faucet leader coupler dual water hose connector(3/4" GHT Male to 1/2" NPT Male) 2 Pcs
Asin: B092HSR1K8
Add Length To The Product，No Leaks,Durable..
If You Have Any Problem With This Product, You Can Just Take Advantage Of Our 90 Days Warranty. We Will Change Or Refund For Any Reason..
Quick And Easy Connect: Easy To Use And Reliable, Very Convenient To Install With Garden Hose Connector.
Please Note That Ght And Npt Are Different Types Of Threads. 3/4” Ght Male To 1/2” Npt Male Connector..
Features
- Heavy duty - Made of solid brass for maximum durability and strength ,Type: Standard 3/4 inch garden hose thread male to 1/2 inch national pipe thread male 2 pack Connectors and1 Pack Sealing Tape
- Please note that GHT and NPT are different types of threads. 3/4 GHT Male to 1/2 NPT Male Connector.
- Add length to the product No Leaks,Durable.
- Quick and Easy Connect: Easy to use and reliable, Very convenient to install with garden hose connector
- If you have any problem with this product, you can just take advantage of our 90 days warranty. We will change or refund for any reason.
- See more on Amazon...
Brand: YELUN | Manufacturer: YELUN
See On Amazon #4
HongBoW 2pcs 1/8 BSPT Male x 1/4 NPT Female Brass Pipe Fitting Adapter BSP NPT Adapter British to US Gauge Sensor Sender Adapter Reducer
Asin: B08G4T8X47 | Model: 0713001 | PartNumber: 0713001
Operating Temperatures Range From -53 To 121 Degrees C (-65 To 250 Degrees F).
These Fittings Contain Lead And Are Not Allowed By Federal Law To Be Installed For Potable (Drinking) Water Use In The U.S.A. And Its Territories..
Male Thread Dimension: 9.73Mm;Female Thread Dimension: 11.9Mm.
Brass For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability.
Features
- BSPT Male Thread , NPT Thread Female Thread
- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
- Male Thread Dimension: 9.73mm;Female Thread Dimension: 11.9mm
- These fittings contain lead and are not allowed by federal law to be installed for potable (drinking) water use in the U.S.A. and its territories.
- See more on Amazon...
Brand: HongBoW Hardware | Manufacturer: ITS
Weight: 0.00 pounds
See On Amazon #5
KOOTANS 1/4 NPT x 1/8 NPT Male Solid Brass Nipples, Heavy Brass Pipe Adapter Fittings Hex Reducing Nipples Connectors 4Pieces
Asin: B07PB7VGK3 | Model: 3325BA | PartNumber: 3325BA | Ean: 0681413584082 | UPC: 681413584082
Function - Used To Connect Female Pipes With Different Diameters, Or Extending The Pipe Length. Apply To Plumbing Connections, Compressed Air, Hydraulic, Refrigeration, Instrumentation, Gas. Hex Nipples For Easy Tightening And Loosening..
Npt Taper Thread - The Standard Npt Taper Threads Allow The Brass Fittings Better Mesh With The Object, Strengthen The Fixation To Prevent Leakage. The Threads Are Smoother, The Installation Is Easier And Faster..
Operating Pressure: 1200 Psi, Temperature Range Of -65°F To +250°F (-53°C To +121°C). It's Hard Connect Way And In Most Cases Do Not Require Sealant..
Material - Premium Solid Brass Nipple, Thicker And Stronger, Durable, Threads Are Deep And Accurate, High Corrosion Resistance, Low Magnetic Permeability And High Temperature Ductility. Quantity: 4Pieces Brass Hex Nipple Adapters..
Features
- SIZE - 1/4 NPT to 1/8 NPT male brass hex nipples. PLEASE NOTE, NPT Taper Thread Size is a nominal pipe size and it does not represent the actual diameter. Please look the size chart for the specific thread diameter. NPT thread has a 60 taper, so usually unable to screw the thread to the end.
- MATERIAL - Premium solid brass nipple, thicker and stronger, durable, threads are deep and accurate, high corrosion resistance, low magnetic permeability and high temperature ductility. Quantity: 4pieces brass hex nipple adapters.
- FUNCTION - Used to connect female pipes with different diameters, or extending the pipe length. Apply to plumbing connections, compressed air, hydraulic, refrigeration, instrumentation, gas. Hex nipples for easy tightening and loosening.
- Operating pressure: 1200 psi, Temperature range of -65 F to +250 F (-53 C to +121 C). It's hard connect way and in most cases do not require sealant.
- NPT TAPER THREAD - The standard NPT taper threads allow the brass fittings better mesh with the object, strengthen the fixation to prevent leakage. The threads are smoother, the installation is easier and faster.
- See more on Amazon...
Brand: KOOTANS | Manufacturer: KOOTANS
See On Amazon #6
2 pcs 1/8 Inch BSPT BSP Schrader Tank Valve 25mm Wheel Air Compressor 35 Bar 500 PSI
Asin: B0916VY9T1 | Model: AV-050 | PartNumber: AV-050 | Ean: 0762944431325 | UPC: 762944431325
Used In Air Compressor Tanks, Truck Wheels, Fire Extiguishers, Motorcycle Forks, Water Tanks, Pressure Testing Pipe Systems, Fuel Systems Etc..
Operation Pressure Up To 35 Bar 500 Psi..
Male 1/8" Bsp Threaded..
Suitable For 1/8" Bsp, Bspt, Pt Fitting Universal..
Features
- Good quality, 100% brand new.
- Suitable for 1/8 BSP, BSPT, PT fitting universal.
- Used in Air Compressor Tanks, Truck Wheels, Fire Extiguishers, Motorcycle Forks, Water Tanks, Pressure Testing Pipe Systems, Fuel Systems etc.
- Male 1/8 BSP threaded.
- Operation pressure up to 35 BAR 500 PSI.
- See more on Amazon...
Brand: Auto-plaza | Manufacturer: Auto-plaza
See On Amazon #7
HUBEST Mini Airbrush Air Filter in-Line Water Separator Water-trap Filter Oil Trap Separator Kit, Connects onto Airbrushes and Hoses with 1/8 Threads for Air compressor G1/8 Connector
Asin: B094CK3VN7 | Model: US-AB-F8 | PartNumber: US-AB-F8
3.The Addition Of Filter Cotton And Sintered Copper Filter Module Plays A Double Filtering Function To Improve The Filtering Effect,Supply Dry And Clean Air..
5.Filter Take Side Intake In The Interior, Which Can Refrain The Direct Gas Impact On Filter Components..
4.This Product Takes Separate Design For Upper And Lower Cabins, Which Not Use The Drainage Valve Design, Makes The Water Draining More Wasily, Solve The Problem Of Loss Due To Frequent Leakage Air Of Drain Valve..
2.Filter Has 1/8" Bsp Female Threads That Attach To The Airbrush And 1/8" Bsp Male Threads That Connect To The Hose..
Features
- 1.Perfect for protecting your airbrush and airbrush projects from getting moisture damage!
- 2.Filter has 1/8 BSP female threads that attach to the airbrush and 1/8 BSP male threads that connect to the hose.
- 3.The addition of filter cotton and sintered copper filter module plays a double filtering function to improve the filtering effect,supply dry and clean air.
- 4.This product takes separate design for upper and lower cabins, which not use the drainage valve design, makes the water draining more wasily, solve the problem of loss due to frequent leakage air of drain valve.
- 5.Filter take side intake in the interior, which can refrain the direct gas impact on filter components.
- See more on Amazon...
Brand: HUBEST | Manufacturer: HUBEST
Weight: 0.17 Pounds
See On Amazon #8
HUBEST 7 pcs of airbrush adaptor set airbrush fitting airbrush connector kit Airbrush Threaded Plug for Connecting Airbrush and air Compressor with Transparent plaxtic Box
Asin: B0774KJTS7 | Model: US-AB-A1234567 | PartNumber: US-AB-A1234567 | Ean: 6936474713822
3. Adapter Attachment Is Designed For Spray Gun, Air Hose And Compressor, When You Need To Use It For Multiple Spray Guns, There Is No Need To Release The Air Pressure, So You Can Quickly Replace The Spray Guns.
4. Connections Ability: No.A1: M5-0.5 Female To 1/8" Bsp Male No.A2: 1/8" Bsp Male To 1/8" Bsp Male No.A3: 1/8" Bsp Male To 1/4" Bsp Male No.A4: 1/8" Bsp Male To 1/4" Bsp Female No.A5: 1/8" Bsp Female To 1/4" Bsp Male No.A6: 1/4" Bsp Male To 1/4" Bsp Male No.A7: 1/4" Bsp Female To M5x0.5 Male.
2. Airbrush Adapter Kits Are Made Of Quality Metal Material, And The Sturdy Structure Makes Them Difficult To Break Or Deform, Durable And Rust-Proof, And Can Be Applied For A Long Time.
Features
- 1. You will get 7 pieces different types of 1/8 inch and 1/4 inch male and female connectors.
- 2. Airbrush adapter kits are made of quality metal material, and the sturdy structure makes them difficult to break or deform, durable and rust-proof, and can be applied for a long time
- 3. adapter attachment is designed for spray gun, air hose and compressor, when you need to use it for multiple spray guns, there is no need to release the air pressure, so you can quickly replace the spray guns
- 4. Connections Ability: No.A1: M5-0.5 Female to 1/8 BSP Male No.A2: 1/8 BSP Male to 1/8 BSP Male No.A3: 1/8 BSP Male to 1/4 BSP Male No.A4: 1/8 BSP Male to 1/4 BSP Female No.A5: 1/8 BSP Female to 1/4 BSP Male No.A6: 1/4 BSP Male to 1/4 BSP Male No.A7: 1/4 BSP Female to M5x0.5 Male
- See more on Amazon...
Brand: HUBEST | Manufacturer: HUBEST
Weight: 0.10 Pounds
See On Amazon #9
Stainless Steel 1/8 BSPT Oil Pressure Sensor Tee to 1/8 NPT adapter Adding for Turbo oil Supply Line/Oil Pressure Gauge
Asin: B0CHNR17M2 | Model: 1/8" BSPT | PartNumber: 1/8" BSPT
Versatile Use: This Adapter Serves Multiple Purposes, Making It Versatile For Various Applications. It Allows You To Install Additional Accessories Such As Oil Pressure Gauges, Turbo Supply Lines, Or Other Sensors While Maintaining The Functionality Of The Original Sensor..
Please Check Thread Size Before Ordering. Works With Most Honda, Subaru, Toyota, Hyundai, Mazda, Suzuki And Mitsubishi Oil Pressure Senders. 2 Years Warranty.
Adding An Oil Pressure Gauge Or Turbo Supply Line Using This Adapter Allows For Real-Time Monitoring Of Oil Pressure. This Is Particularly Beneficial For Performance Enthusiasts Who Want To Keep A Close Eye On Their Engine's Vital Signs..
Larlansz Precise Threads : The Adapter Is Designed To Be A Precise Fit For 1/8" Bspt Oil Pressure Sensors And Connections.This Ensures A Secure And Leak-Free Connection, Preventing Oil Leaks And Pressure Loss. 1/8 Bspt Female To 1/8 Bspt Male With 1/8 Npt Port.
Features
- Oil Pressure Sensor Tee Adapter is well-crafted from durable Stainless Steel materials. It is built to withstand the demands of the engine compartment and the high-pressure oil system, ensuring long-lasting performance.
- Larlansz Precise threads : The adapter is designed to be a precise fit for 1/8 BSPT oil pressure sensors and connections.This ensures a secure and leak-free connection, preventing oil leaks and pressure loss. 1/8 BSPT Female to 1/8 BSPT Male with 1/8 NPT Port
- Versatile Use: This adapter serves multiple purposes, making it versatile for various applications. It allows you to install additional accessories such as oil pressure gauges, turbo supply lines, or other sensors while maintaining the functionality of the original sensor.
- Adding an oil pressure gauge or turbo supply line using this adapter allows for real-time monitoring of oil pressure. This is particularly beneficial for performance enthusiasts who want to keep a close eye on their engine's vital signs.
- Please check thread size before ordering. Works with most Honda, Subaru, Toyota, Hyundai, Mazda, Suzuki and Mitsubishi oil pressure senders. 2 years warranty
- See more on Amazon...
Brand: Larlansz | Manufacturer: Larlan
Weight: 0.16 pounds
See On Amazon #10
HUBEST 6' FT Braided Airbrush Air Hose 1/8"-1/8"(1/4") Adaptor Fitting Hose 1/8 Size On Both End and Adapter 1/8 male - 1/4 female
Asin: B078T94D4F | Model: 6936474714041 | PartNumber: 6936474714041 | Ean: 6936474714041
Standard 1/8" Bsp Male And 1/8" Bsp Female Fitting. No More Leak Performance, 1/8" Bsp For Airbrush, 1/8" Bsp For Air Compressor..
The Rubber Nylon Airbrush Hose Is Not Affected By The Season, It Does Not Harden In Winter Or Summer..
Unique Braided Wall Construction Resists Kinking Or Twisting With Excellent Flex & Durability.
Premium-Grade Air Hose Engineered Specifically For Use With Airbrush Painting.
Features
- Airbrush hose is nylon braided outside and rubber inner with blue color, on both end is G/8 - G1/8 . The airbrush hose adapter is G1/8 male G1/4 female.
- Premium-grade air hose engineered specifically for use with airbrush painting
- Standard 1/8 BSP male and 1/8 BSP female fitting. No more leak performance, 1/8 BSP for airbrush, 1/8 BSP for air compressor.
- Unique braided wall construction resists kinking or twisting with excellent flex & durability
- The rubber nylon airbrush hose is not affected by the season, It does not harden in winter or summer.
- See more on Amazon...
Brand: ABEST | Manufacturer: Ediyworld
See On Amazon
Looking For Something Else?
Search