ZahyoX Compression Spiral CNC Bit, Solid Carbide Straight Router Bit, 8 CD - 8 SD - 25 CL - 76 OL - 1/4 UCL, CNC Router Bits, CNC End Mill
Asin: B0BPQ9YQCW | Model: S0803-1 | PartNumber: S0803-1 | Ean: 0717577616144 | UPC: 717577616144
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Features
- ZahyoX Compression Spiral CNC Bit, Solid Carbide Straight Router Bit, 8 CD - 8 SD - 25 CL - 76 OL - 1/4 UCL, CNC Router Bits, CNC End Mill
- See more on Amazon...
Brand: Zahyox | Manufacturer: ZahyoX
Dimensions: 2.99 x 0.31 x 0.31 inches
See On Amazon Similar To ZahyoX Compression Spiral CNC Bit
#1
SpeTool Carbide Spiral Router Bits Up&Down Compression Bit 1/4 X 1 inch Cutting Size with 1/4 inch Shank for Woodwork CNC Router Bit Engraving Carving Mortise Groove Tools
Asin: B086L6MYJ4 | Model: SP-D1/4-1/4-U&D | PartNumber: SP-D1/4-1/4-U&D
Durable And Precise. This Up&Down Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
2 Flutes. Spiral Bit Design Allows For Efficient Chip Removal, Reducing Heat Buildup, Better Than Straight Bits.
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Compatibility. This 1/4 Compression Bit Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/4" Collet..
Compression Cut. The Compression Cutters Are Designed With Both Up And Down-Cut Flutes, Combatting Delamination On The Top And Bottom Of A Workpiece.
Features
- SPECIFICATION. Solid carbide up down router bits with 1/4inch shank and 1/4inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length , can be used on routers with 1/4" collect
- COMPRESSION CUT. The compression cutters are designed with both up and down-cut flutes, combatting delamination on the top and bottom of a workpiece
- DURABLE AND PRECISE. This up&down router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- COMPATIBILITY. This 1/4 compression bit is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/4 collet.
- 2 FLUTES. Spiral Bit Design allows for efficient chip removal, reducing heat buildup, better than straight bits
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #2
Whiteside Router Bits UD2102 Up/Down Cut Spiral Bit with Solid Carbide Compression and 1/4-Inch Cutting Diameter
Asin: B0012K5YDK | Model: UD2102 | PartNumber: UD2102 | Ean: 0785533329445, 0844278007022, 0735090616847 | UPC: 735090616847, 785533329445, 844278007022
Industrial Quality.
1-Inch Cutting Length 1/4-Inch Shank 1 Flute.
Up/Down Cut Spiral.
Features
- UD2102
- Up/Down Cut Spiral
- Industrial Quality
- 1-inch Cutting Length 1/4-inch shank 1 Flute
- See more on Amazon...
Brand: Whiteside | Manufacturer: Whiteside
Dimensions: 5.50 x 2.00 x 3.00 inches | Weight: 0.00 Pounds
See On Amazon #3
EANOSIC Compression Spiral Router Bits 1/4" Shank,1-1/4" Cutting Length, Extra Long 3 Inch, Carbide UP Down Cut CNC Router Bits End Mill for Wood Mortises Carving Engraving
Asin: B0BXSGFX68 | Model: E220 | PartNumber: E220
Cnc Spiral Bits Used For Side Milling, End Milling, Finish Machining, Etc. End Mill Bits Can Smoothly Upcut And Downcut Groove And Slots, Mortises, Cycles And Dados With Clean Edge And Bottom, Better Than Straight Bits..
The Router Bit Suit For Cnc Router And Any Plunge Routers With 1/4" Collet..
The Cnc End Mill Router Bits Apply To Various Wood: Such As Plywood, Oak, Mdf, And Any Hardwood Working And Long Service Life For Sharp. And Also For Carbon Steel, Soft Alloy Steel, Tool Steel, Cast Iron, Aluminum Alloy..
Solid Carbide And Nano Blue Coated: The Up And Down Cut Spiral Router Bit Is Made Of Solid Carbide. And Nano Blue Coating With High Hardness And Heat Resistance Enables The Tool's Cutting Edge To Retain Crucial Sharpness And Lubricity. This Provides Longevity And Produces Cutting Results Of The Highest Quality. Clean Surface, Neat, No Glitches..
Features
- UP & DOWN cut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length (Extra Long)
- SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches.
- CNC spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits.
- The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy.
- The router bit suit for CNC router and any plunge routers with 1/4 collet.
- See more on Amazon...
Brand: EANOSIC | Manufacturer: EANOSIC
See On Amazon #4
SpeTool Compression Router Bits 1/4 Inch Shank 1 Inch Cutting Length with Coated Carbide Spiral Up Down CNC Router Bit End Mills for Carving Wood Woodworking Tools
Asin: B09DTSXTRD | Model: SP-D1/4-1/4-U&D-TAC | PartNumber: SP-D1/4-1/4-U&D-TAC
Compression Cut. The Compression Cutters Are Designed With Both Up And Down-Cut Flutes, Combatting Delamination On The Top And Bottom Of A Workpiece..
Durable And Precise. This Cnc Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
Compatibility. This Cnc Router Bits 1/4 Shank Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/4" Collet..
Coating. The New Coating Provide Up To 2.5 Times Life Than The Uncoated, Make The Bit Sturdy Durable, Sharp Efficient, Smooth Stable..
Features
- SPECIFICATION. Compression cut router bits 1" cutting length; 1/4" cutting diameter; 1/4" shank; 2-1/2" overall length, can be used on routers with 1/4" collect.
- COATING. The new coating provide up to 2.5 times life than the uncoated, make the bit sturdy durable, sharp efficient, smooth stable.
- COMPRESSION CUT. The compression cutters are designed with both up and down-cut flutes, combatting delamination on the top and bottom of a workpiece.
- COMPATIBILITY. This cnc router bits 1/4 shank is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/4 collet.
- DURABLE AND PRECISE. This CNC Bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #5
EANOSIC Spiral Router Bits Up Down Compression Bit 1/4 inch Cutting Diameter with Nano Blue Coated, 1/4 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters
Asin: B09H33X98L | Model: E2106 | PartNumber: E2106
Spiral Bits Used For Side Milling, End Milling, Finish Machining, Etc. End Mill Bits Can Smoothly Upcut And Downcut Groove And Slots, Mortises, Cycles And Dados With Clean Edge And Bottom, Better Than Straight Bits..
The Router Bit Suit For Cnc Router And Any Plunge Routers With 1/4" Collet..
The Cnc End Mill Router Bits Apply To Various Wood: Such As Plywood, Oak, Mdf, And Any Hardwood Working And Long Service Life For Sharp. And Also For Carbon Steel, Soft Alloy Steel, Tool Steel, Cast Iron, Aluminum Alloy..
Solid Carbide And Nano Blue Coated: The Up And Down Cut Spiral Router Bit Is Made Of Solid Carbide. And Nano Blue Coating With High Hardness And Heat Resistance Enables The Tool's Cutting Edge To Retain Crucial Sharpness And Lubricity. This Provides Longevity And Produces Cutting Results Of The Highest Quality. Clean Surface, Neat, No Glitches..
Features
- UP & DOWN cut spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length
- SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches.
- Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits.
- The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy.
- The router bit suit for CNC router and any plunge routers with 1/4 collet.
- See more on Amazon...
Brand: EANOSIC | Manufacturer: EANOSIC
See On Amazon #6
SpeTool Spiral Router Bits Up&Down Compression Bit 1/8 inch Cutting Diameter, 1/4 inch Shank HRC55 Solid Carbide CNC End Mill for Wood Carving Engraving Grinding
Asin: B08R55969M | Model: W02004 | PartNumber: W02004
Durable And Precise. This Up&Down Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
2 Flutes. Spiral Bit Design Allows For Efficient Chip Removal, Reducing Heat Buildup, Better Than Straight Bits.
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Compatibility. This 1/8 Compression Bit Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/4" Collet..
Compression Cut. The Compression Cutters Are Designed With Both Up And Down-Cut Flutes, Combatting Delamination On The Top And Bottom Of A Workpiece.
Features
- SPECIFICATION. Solid carbide up down router bits with 1/4inch shank and 1/8inch cutting diameter, 3/4 inch cutting length, 2-1/2 inch for total length , can be used on routers with 1/4" collect
- COMPRESSION CUT. The compression cutters are designed with both up and down-cut flutes, combatting delamination on the top and bottom of a workpiece
- DURABLE AND PRECISE. This up&down router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- COMPATIBILITY. This 1/8 compression bit is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/4 collet.
- 2 FLUTES. Spiral Bit Design allows for efficient chip removal, reducing heat buildup, better than straight bits
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #7
HQMaster Up & Down Cut Bit 1/8" Shank Compression Bit Spiral CNC Router Bits End Mill Tungsten Carbide Milling Cutter Set 5 Pack
Asin: B0BFW9GTPD | Model: HQ-60081 | PartNumber: HQ-60081
Clean Cut & Excellent Edge-Grinding: Compression Bit Is The Combination Of Both Upcut And Downcut Spirals. The Bottom Of The Material Will Be Pulled Upwards While The Top Of The Material Is Pushed Downwards Thus Eliminating The Risk Of Damaging The Laminated Surfaces, Leaving A Sharp, Clean Edge On Both Sides Of Your Workpiece. Non-Stick Crumbs, Smokeless, And Silent During Processing, Smooth Cutting, And Fast Chip Removal..
Package Includes: 5Pcs Up & Down Cut Bit.
Widely Use: Compression Cnc Router Bit Specially Designed For Mortising Grooving And Dado In Plastic, Plywood, Oak, Mdf, And Any Hardwood Working With Machines Cnc Machines. Work For Table-Mounted And Small Or Handheld Cnc Routers..
Durable & Long-Lasting Tool Life: High-Quality Solid Carbide Router Bits With Nano Blue Coat Feature With High Hardness, Heat Resistance, And Long-Lasting Cutting-Edge Performance Ensure High Work Efficiency..
Features
- UP and DOWN SPIRAL ROUTER BIT: 1/8" shank, 1/8" cutting diameter, 7/8"=22mm cutting length, 1-31/32"=50mm total length.
- DURABLE & LONG-LASTING TOOL LIFE: high-quality solid carbide router bits with nano blue coat feature with high hardness, heat resistance, and long-lasting cutting-edge performance ensure high work efficiency.
- CLEAN CUT & EXCELLENT EDGE-GRINDING: Compression bit is the combination of both upcut and downcut spirals. The bottom of the material will be pulled upwards while the top of the material is pushed downwards thus eliminating the risk of damaging the laminated surfaces, leaving a sharp, clean edge on both sides of your workpiece. Non-stick crumbs, smokeless, and silent during processing, smooth cutting, and fast chip removal.
- WIDELY USE: Compression CNC router bit specially designed for mortising grooving and dado in plastic, plywood, oak, MDF, and any hardwood working with machines CNC machines. Work for table-mounted and Small or handheld CNC routers.
- Package Includes: 5pcs Up & Down Cut Bit
- See more on Amazon...
Brand: HQMaster | Manufacturer: HQMaster
See On Amazon #8
SpeTool 5Pcs Carbide Compression Router Bit Up&Down Cut 1/8 inch Cutting Dia for CNC Mill Machine Wookwork 3D Profile Detail Engraver Carving
Asin: B09R1PG9XF | Model: SP-D1/8-1/8-U&D-STaC | PartNumber: SP-D1/8-1/8-U&D-STaC
Compression Cut. The Compression Cutters Are Designed With Both Up And Down-Cut Flutes, Combatting Delamination On The Top And Bottom Of A Workpiece..
Durable And Precise. This Up&Down Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Compatibility. This Router Bits Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/4" Collet..
Coating. The New Coating Provide Up To 2.5 Times Life Than The Uncoated, Make The Bit Sturdy Durable, Sharp Efficient, Smooth Stable..
Features
- SPECIFICATION. Compression cut router bits 3/4" cutting length; 1/8" cutting diameter; 1/8" shank; 1-1/2" overall length, can be used on routers with 1/8" collect.
- COATING. The new coating provide up to 2.5 times life than the uncoated, make the bit sturdy durable, sharp efficient, smooth stable.
- COMPRESSION CUT. The compression cutters are designed with both up and down-cut flutes, combatting delamination on the top and bottom of a workpiece.
- COMPATIBILITY. This Router Bits is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/4 collet.
- DURABLE AND PRECISE. This up&down router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #9
Whiteside Router Bits UD4122 Up/Down Cut Spiral Bit with Solid Carbide Compression and 3/8-Inch Cutting Diameter
Asin: B000K2EH2K | Model: UD4122 | PartNumber: UD4122 | Ean: 0844278007046, 0732454845790 | UPC: 844278007046, 732454845790
Industrial Quality.
Precision Ground For Proper Balance At High Rpm.
Features
- Whiteside Router Bits are made with Premium Carbide
- Precision ground for proper balance at high RPM
- Industrial Quality
- See more on Amazon...
Brand: Whiteside | Manufacturer: Whiteside
Dimensions: 5.50 x 2.00 x 3.00 Inches
See On Amazon #10
ZahyoX 1/4 Inch Shank Up Down Compression Spiral Router Bit, Nano Coated Solid Carbide Straight CNC End Mill for Wood, 1/4 Dia x 1 CL x 2-1/2 OVL
Asin: B0BRV8J1QN | Ean: 0717577616229 | UPC: 717577616229
The Geometry Design Has Been Iterated Hundreds Of Times To Ensure A Perfect Balance Between Tool Life And Cutting Efficiency. We Run Our Bits Systematically On Various Machines And Materials To Test The Performance Of Each Iteration..
The Bit Is Made Of Wc-Co Alloy, And 100% Made By Our Own Factory To Ensure Consistency, You Can Expect That Every Bit We Produce Performs Exactly The Same..
X-Series Is One Of Our Signature Product Lineups And Bestselling For Wood Cutting, It Is Made By Our Own Pvd Process Of Nano Composite Titanium Aluminum Silicon Nitride Which Provides Highest Hardness Of 3800 Hv, Extremely Low Friction Of 0.25, At 900°F Max Working Temperature. The Coating Provides 3 Times Longer Tool Life For Wood Cutting Performance..
Zahyox Is Industrial Leading Manufacturer, Making Solid Carbide Material And Solid Carbide Router Bits Is Our Sole Business For Over Two Decades, We Make Our Products Like Treating Art..
Features
- Specs: 1/4" Cutting Diameter, 1/4" Shank, 1" Cutting Length, 2-1/2" Overall Length, 2 Flutes, Compression (Up and Down Cut) Spiral, Nano Coated.
- ZahyoX is industrial leading manufacturer, making solid carbide material and solid carbide router bits is our sole business for over two decades, we make our products like treating art.
- The geometry design has been iterated hundreds of times to ensure a perfect balance between tool life and cutting efficiency. We run our bits systematically on various machines and materials to test the performance of each iteration.
- X-Series is one of our signature product lineups and bestselling for wood cutting, it is made by our own PVD process of Nano Composite Titanium Aluminum Silicon Nitride which provides highest hardness of 3800 HV, extremely low friction of 0.25, at 900 F max working temperature. The coating provides 3 times longer tool life for wood cutting performance.
- The bit is made of WC-CO Alloy, and 100% made by our own factory to ensure consistency, you can expect that every bit we produce performs exactly the same.
- See more on Amazon...
Brand: Zahyox | Manufacturer: ZahyoX
Dimensions: 2.50 x 0.25 x 0.25 Inches
See On Amazon #11
SpeTool 5PCS Spiral Router Bits Up Down Compression Bit with 1/4" Shank 1" Cutting Length , Solid Carbide CNC Router Bit Set for Wood Slot Mortise Cut Carving Engraving
Asin: B0BJ27B21G | Model: WD-4 | PartNumber: WD-4
The Cnc End Mill For Plywood, Oak, Mdf, And Any Hardwood Working And Long Service Life For Sharp.
The 5Pcs Cnc Router Bit Set Include 2Pcs Upcut ,2Pcs Downcut, 1Pc Compression Bit.
The Route Bit Suit For Cnc Router And Makita, Bosch, And Any Brand Plunge Router With 1/4” Collet.
The Spiral Bit Used For Smoothly Downcut Upcut Groove And Slots, Mortises, Cycles And Dados , Plunge Cut Leave With Clean Edge, Better Than Straight Bits.
Features
- Solid carbide spiral router bit with 1/4 inch shank and 1/4 inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length
- The spiral bit used for smoothly downcut upcut groove and slots, Mortises, Cycles and dados , Plunge cut leave with clean edge, better than straight bits
- The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp
- The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4 collet
- The 5PCS CNC Router Bit Set Include 2PCS Upcut ,2PCS Downcut, 1PC Compression Bit
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
Dimensions: 0.25 x 2.50 x 0.25 inches
See On Amazon #12
EANOSIC Spiral Router Bits Up Down Compression Bit 1/2 inch Cutting Diameter with Nano Blue Coated, 1/2 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters (Extra Long 4 )
Asin: B0BGH26QVP | Model: E204 | PartNumber: E204
Spiral Bits Used For Side Milling, End Milling, Finish Machining, Etc. End Mill Bits Can Smoothly Upcut And Downcut Groove And Slots, Mortises, Cycles And Dados With Clean Edge And Bottom, Better Than Straight Bits..
The Compression Router Bit Suit For Cnc Router And Any Plunge Routers With 1/2" Collet..
The Cnc End Mill Router Bits Apply To Various Wood: Such As Plywood, Oak, Mdf, And Any Hardwood Working And Long Service Life For Sharp. And Also For Carbon Steel, Soft Alloy Steel, Tool Steel, Cast Iron, Aluminum Alloy..
Solid Carbide And Nano Blue Coated: The Up And Down Cut Spiral Router Bit Is Made Of Solid Carbide. And Nano Blue Coating With High Hardness And Heat Resistance Enables The Tool's Cutting Edge To Retain Crucial Sharpness And Lubricity. This Provides Longevity And Produces Cutting Results Of The Highest Quality. Clean Surface, Neat, No Glitches..
Features
- UP & DOWN cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 1-1/2 inch cutting length, 4 inch for total length
- SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches.
- Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles and dados with clean edge and bottom, better than straight bits.
- The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy.
- The compression router bit suit for CNC router and any plunge routers with 1/2 collet.
- See more on Amazon...
Brand: EANOSIC | Manufacturer: EANOSIC
See On Amazon #13
SpeTool Spiral Compression Router Bits 1/4" Shank,1-1/4Inch Cutting Length, Extra Long 3 Inch OVL,Carbide UP Down CNC Router Bits End Mill for Wood Mortises Carving Engraving
Asin: B0B3XDGY9M | Model: D1/4-1/4-U&D | PartNumber: D1/4-1/4-U&D
Durable And Precise. Spetool Up&Down Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Compatibility. This 1/4 Compression Bit Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/4" Collet..
Compression Cut. The Compression Cutters Are Designed With Both Up And Down-Cut Flutes, Combatting Delamination On The Top And Bottom Of A Workpiece.
Features
- SPECIFICATION. Solid carbide up down router bits with 1/4inch shank and 1/4inch cutting diameter, 1-1/4 inch cutting length,3 inch for overall length, can be used on routers with 1/4" collect
- COMPRESSION CUT. The compression cutters are designed with both up and down-cut flutes, combatting delamination on the top and bottom of a workpiece
- DURABLE AND PRECISE. SpeTool up&down router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- COMPATIBILITY. This 1/4 compression bit is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/4 collet.
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #14
ZahyoX 1/4 Inch Shank Upcut Spiral Router Bit Extra Long, Solid Carbide Straight CNC End Mill for Wood, 1/4 Dia x 1-1/2 CL x 3 OVL
Asin: B09YHF3ZX7 | Model: S1410 | PartNumber: S1410 | Ean: 0760646118919 | UPC: 760646118919
Perfect For Cnc Sizing, Cutting, Copying And Routing Plywood, Oak, Mdf, Other Hardwood Materials, Plastic, Laminates And Soft Metals..
Zahyox Provides Industrial Quality Cnc & Woodworking Tools At An Affordable Price, By Using Superior Materials, Cutting-Edge Machinery And Patented Technology. Fully Guaranteed With Online Customer Support Team..
Kickback-Reducing Design Prevents Overfeed And Tearout. Advanced Cutting Geometry For Superior Chip Evacuation And Finish Quality. Offering Better Cuts And Efficiency Than Other Bits On The Market..
Made Of Industrial Quality Solid Carbide, Reinforced With Tungsten Carbide Cutters. This 1/4 Inch Upcut Router Bit Is Specifically Designed To Provide High Quality Finish And Efficient Cuts..
Features
- Specs: 1/4" Cutting Diameter, 1/4" Shank, 1-1/2" Cutting Length, 3" Overall Length, 2 Flutes, Up Cut Spiral.
- Made of industrial quality Solid Carbide, reinforced with Tungsten Carbide cutters. This 1/4 inch upcut router bit is specifically designed to provide high quality finish and efficient cuts.
- Perfect for CNC sizing, cutting, copying and routing plywood, OAK, MDF, other hardwood materials, plastic, laminates and soft metals.
- Kickback-reducing design prevents overfeed and tearout. Advanced cutting geometry for superior chip evacuation and finish quality. Offering better cuts and efficiency than other bits on the market.
- ZahyoX provides industrial quality CNC & woodworking tools at an affordable price, by using superior materials, cutting-edge machinery and patented technology. Fully guaranteed with online customer support team.
- See more on Amazon...
Brand: ZahyoX | Manufacturer: ZahyoX
Dimensions: 3.00 x 0.25 x 0.25 inches
See On Amazon #15
ZahyoX Up Down Compression Spiral CNC Bit, Nano Coated Solid Carbide Straight Router Bit, 3/8" Cutting Dia, 3/8" Shank, 1-5/8" Cutting Length, 3-1/2" Overall Length, CNC Router Bits, CNC End Mill
Asin: B0B3XC2P3M | Ean: 0760646130027 | UPC: 760646130027
The Zahyox X-Series Blue Nano Coating Delivers Up To 3 Times More Cutting Life & Better Finish Quality, Making It More Wear And Heat Resistant, Better Corrosion Protection, And Extreme Durability..
Zahyox Provides Industrial Quality Cnc & Woodworking Tools At An Affordable Price, By Using Superior Materials, Cutting-Edge Machinery And Patented Technology. Fully Guaranteed With Online Customer Support Team..
Kickback-Reducing Design Prevents Overfeed And Tearout. Advanced Cutting Geometry For Superior Chip Evacuation And Finish Quality. Offering Better Cuts And Efficiency Than Other Bits On The Market..
Made Of Industrial Quality Solid Carbide, Reinforced With Tungsten Carbide Cutters. This 3/8 Inch Compression Router Bit Is Specifically Designed To Provide High Quality Finish And Efficient Cuts. Perfect For Cnc Sizing, Cutting, Copying And Routing Plywood, Oak, Mdf, Other Hardwood Materials, Plastic, Laminates And Soft Metals..
Features
- Specs: 3/8" Cutting Diameter, 3/8" Shank, 1-5/8" Cutting Length, 3-1/2" Overall Length, 2 Flutes, Compression (Up and Down Cut) Spiral, Nano Coated.
- Made of industrial quality Solid Carbide, reinforced with Tungsten Carbide cutters. This 3/8 inch compression router bit is specifically designed to provide high quality finish and efficient cuts. Perfect for CNC sizing, cutting, copying and routing plywood, OAK, MDF, other hardwood materials, plastic, laminates and soft metals.
- The ZahyoX X-Series Blue Nano Coating delivers up to 3 times more cutting life & better finish quality, making it more wear and heat resistant, better corrosion protection, and extreme durability.
- Kickback-reducing design prevents overfeed and tearout. Advanced cutting geometry for superior chip evacuation and finish quality. Offering better cuts and efficiency than other bits on the market.
- ZahyoX provides industrial quality CNC & woodworking tools at an affordable price, by using superior materials, cutting-edge machinery and patented technology. Fully guaranteed with online customer support team.
- See more on Amazon...
Brand: Zahyox | Manufacturer: ZahyoX
Dimensions: 3.50 x 0.38 x 0.38 inches
See On Amazon #16
SpeTool Spiral Compression Router Bit 3/16" Cutting Diamter 1/4" Shank, Solid Carbide Router Bit Up Douwn Spiral Router Bits End Mill for CNC Wood Carving
Asin: B0CQNZYX5J
Durable And Precise. This Up&Down Router Bits Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
2 Flutes. Spiral Bit Design Allows For Efficient Chip Removal, Reducing Heat Buildup, Better Than Straight Bits.
Compatibility. This 1/4 Compression Bit Is Perfect For Soft Woods, Hard Woods, Plywood, Laminate, Oak, Mdf And Any Hardwood Working. It Can Be Used With Cnc Router And Handheld Router With 1/4" Collet..
Compression Cut. The Compression Cutters Are Designed With Both Up And Down-Cut Flutes, Combatting Delamination On The Top And Bottom Of A Workpiece.
Features
- SPECIFICATION. Solid carbide up down router bits with 1/4inch shank and 3/16inch cutting diameter, 1 inch cutting length, 2-1/2 inch for total length , can be used on routers with 1/4" collet
- COMPRESSION CUT. The compression cutters are designed with both up and down-cut flutes, combatting delamination on the top and bottom of a workpiece
- DURABLE AND PRECISE. This up&down router bits are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- COMPATIBILITY. This 1/4 compression bit is perfect for soft woods, hard woods, Plywood, laminate, OAK, MDF and any hardwood working. It can be used with cnc router and handheld router with 1/4 collet.
- 2 FLUTES. Spiral Bit Design allows for efficient chip removal, reducing heat buildup, better than straight bits
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon #17
XUAN Spiral Router Bits Up Down Compression Bit 1/4 inch Cutting Diameter with Nano Blue Coated, 1/4 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters F2277
Asin: B0B8GMB4LC | Ean: 0759041650339 | UPC: 759041650339
Blue Based Color Dissipates Immediately Upon Use. Naco Coating Will Not Wear Off..
For Use On Cnc, Table Mount And Handheld Routers.
Premium C3 Micro-Grain Solid Tungsten Carbide For A High-Performance Industrial Quality Tool.
Shank Diameter: 1/4" Overall Length: 2-1/2" Flutes: 2.
Features
- Cutting Diameter: 1/4" Cutting Height: 1"
- Shank Diameter: 1/4 Overall Length: 2-1/2 Flutes: 2
- Blue based color dissipates immediately upon use. nACo coating will not wear off.
- Premium C3 micro-grain solid tungsten carbide for a high-performance industrial quality tool
- For use on CNC, table mount and handheld routers
- See more on Amazon...
Brand: XUAN | Manufacturer: CO-BETTER
Dimensions: 0.39 x 2.36 x 0.39 inches
See On Amazon #18
Align Carbide, UP Down (Compression) Router Bit, 1/4 Inch Cutting Diameter, 1/4 Inch Shank, Premium Solid Micro Grain Carbide, Spiral Plunge, 2 Flute, Flat Cutting Face, CNC Router Pro-Series.
Asin: B082S6C8WJ | Model: AC-142 | PartNumber: AC-142 | Ean: 0753387861664 | UPC: 753387861664
⭐ Up Down Compression Spiral Bits Shear From Bottom Up And Top Down, Combining The Best Of Up And Down Cut Bits..
⭐ Excellent Choice For Dado, Rabbet, Mortise, Pocket, Profile Cutting And Clearing Material..
⭐ Premium Case Provided With Each Bit, For Moisture Free. Safe Storage. Size Printed On Each Case..
⭐ Industrial Quality, Perfect For Cnc Router Tables, Hand-Held, Table-Mounted Portable Routers..
Features
- Align Carbide router bits are perfect for wood, plywood, MDF and other wood composites, plastics.
- Industrial quality, perfect for CNC router tables, hand-held, table-mounted portable routers.
- Up Down Compression spiral bits shear from bottom up and top down, combining the best of up and down cut bits.
- Premium case provided with each bit, for moisture free. safe storage. Size printed on each case.
- Excellent choice for dado, rabbet, mortise, pocket, profile cutting and clearing material.
- See more on Amazon...
Brand: ALIGN CARBIDE | Manufacturer: Align Carbide
See On Amazon #19
EANOSIC Spiral Router Bits Up Down Compression Bit 1/8 inch Cutting Diameter, 1/4 inch Shank Solid Carbide CNC End Mill with Nano Blue Coating for Wood Carving Engraving Grinding
Asin: B0BQJ7MN2W | Model: E211 | PartNumber: E211
Spiral Bits Used For Smoothly Downcut Groove And Slots, Mortises, Cycles And Dados, Plunge Cut Leave With Clean Edge And Top Surface, Better Than Straight Bits.
The Router Bit Suit For Cnc Router And Any Plunge Routers With 1/4" Collet..
The Cnc End Mill Router Bits Apply To Various Wood: Such As Plywood, Oak, Mdf, And Any Hardwood Working And Long Service Life For Sharp. And Also For Carbon Steel, Soft Alloy Steel, Tool Steel, Cast Iron, Aluminum Alloy..
Solid Carbide And Nano Blue Coated: The Compression Spiral Router Bit Is Made Of Solid Carbide. And Nano Blue Coating With High Hardness And Heat Resistance Enables The Tool's Cutting Edge To Retain Crucial Sharpness And Lubricity. This Provides Longevity And Produces Cutting Results Of The Highest Quality. Clean Surface, Neat, No Glitches..
Features
- UP and DOWN Solid Carbide spiral router bit with 1/4 inch shank and 1/8 inch cutting diameter, 3/4 inch cutting length, 2-1/2 inch extra long for total length
- SOLID CARBIDE AND NANO BLUE COATED: The compression spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality. Clean surface, neat, no glitches.
- Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados, Plunge cut leave with clean edge and top surface, better than straight bits
- The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy.
- The router bit suit for CNC router and any plunge routers with 1/4 collet.
- See more on Amazon...
Brand: EANOSIC | Manufacturer: EANOSIC
See On Amazon #20
SpeTool Compression Spiral Router Bits 1/2 Shank with TAC Extreme Tool Life Coateding, Extra Long 5 Inch Overall Length, 3 Inch Cutting Length, Carbide UP Down CNC Router Bit for Wood Carving Tools
Asin: B0CZKNLR85 | Model: SPXL-D1/2-1/2-TAC | PartNumber: SPXL-D1/2-1/2-TAC
Compression Cut. The Compression Cutters Are Designed With Both Up And Down-Cut Flutes, Combatting Delamination On The Top And Bottom Of A Workpiece..
Spetool Service. Good Quality, Cost-Effective, Efficient After-Sales Service, Etc..
Durable And Precise. This Extra Long Router Bit Are High-Quality Construction Ensures Durability And Precision, Allowing For Consistent And Accurate Cuts..
Coating. The New Coating Provide Up To 2.5 Times Life Than The Uncoated, Make The Bit Sturdy Durable, Sharp Efficient, Smooth Stable..
Features
- SPECIFICATION. Solid carbide up down router bits with 1/2 inch shank and 1/2 inch cutting diameter, 3 inch cutting length, 5 inch for overall length, can be used on routers with 1/2" collect
- COATING. The new coating provide up to 2.5 times life than the uncoated, make the bit sturdy durable, sharp efficient, smooth stable.
- COMPRESSION CUT. The compression cutters are designed with both up and down-cut flutes, combatting delamination on the top and bottom of a workpiece.
- DURABLE AND PRECISE. This extra long router bit are high-quality construction ensures durability and precision, allowing for consistent and accurate cuts.
- SPETOOL SERVICE. Good quality, cost-effective, efficient after-sales service, etc.
- See more on Amazon...
Brand: SpeTool | Manufacturer: SpeTool
See On Amazon
Looking For Something Else?
Search