JHEMCU GF16 F405 Flight Controller Stack with 2-4S 13A 4in1 ESC SpeedyFPV
Asin: B0BQ8JQTMY | Model: 647625489096 | PartNumber: 647625489096 | Ean: 0647625489096 | UPC: 647625489096
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Esc Specifications: Input Voltage: 2-4S Lipo/2-4S Hv Lipo, Bec Output: None, Continuous Working Current Of A Single Esc: 13A*4, External Esc Size: 24*25Mm (Including The Maximum Size Of Pads And Protruding Points), Screw Hole Pitch 16*16Mm, Aperture 3Mm, Firmware: Blheli_S G_H_30_16_7.Hex, Support Dshot600, Dshot300, Dshot150, Oneshot125, Multishot, Pwm Control Signals.
Package Contents: Gf16-F405 Flight Control *1 Gf16-Esc Four-In-One Esc *1 M2*20 Screw *4 M2*5 Shock Absorbing Ball *8 M2 Nut *4 18Awg Wire *2 220Uf/25V Capacitor *1 Xt30 *1.
Flight Controller Specifications: Cpu: Stm32f405, Gyroscope/Accelerometer: Mpu6000, Osd: At7456e, Barometer: Bmp280, Black Box: 16Mb, Iic: Support, Bec: 5V/3A, Number Of Motor Channels: 8 M1-M8, Uart: Uart1 (Rc), Uart2, Uart3, Uart4, Uart6, Usb: Micro Usb, Size: 16*16Mm M3, Receiver: Elrs (Crsf), Tbs (Crsf), Sbus, Ibus, Ds M2, Ds Mx Support Programmable Led Such As Ws2812 Support Buzzer, Built-In Voltage And Current Sensors,.
Features
- JHEMCU GF16 flying tower is a 2-4S F405 flight controller and esc stack, with 5 serial ports (UART1, UART2, UART3, UART4, UART6), 8 motor ports, one I2C port, and one SBUS interface (the serial port used by SBUS is RX1). Leave the WS2812 interface. Built-in black box 16MB and barometer, buzzer interface, camera interface.
- Flight Controller Specifications: CPU: STM32F405, Gyroscope/Accelerometer: MPU6000, OSD: AT7456E, Barometer: BMP280, Black box: 16MB, IIC: Support, BEC: 5V/3A, Number of motor channels: 8 M1-M8, UART: UART1 (RC), UART2, UART3, UART4, UART6, USB: micro usb, Size: 16*16MM M3, Receiver: ELRS (CRSF), TBS (CRSF), SBUS, IBUS, DS M2, DS MX Support programmable LED such as WS2812 Support buzzer, Built-in voltage and current sensors,
- ESC Specifications: Input voltage: 2-4S LiPo/2-4S HV LiPo, BEC output: none, Continuous working current of a single ESC: 13A*4, External ESC size: 24*25mm (including the maximum size of pads and protruding points), Screw hole pitch 16*16MM, aperture 3MM, Firmware: BLHELI_S G_H_30_16_7.HEX, Support Dshot600, Dshot300, Dshot150, Oneshot125, Multishot, PWM control signals
- Package Contents: GF16-F405 flight control *1 GF16-ESC Four-in-one ESC *1 M2*20 screw *4 M2*5 shock absorbing ball *8 M2 nut *4 18AWG wire *2 220UF/25V capacitor *1 XT30 *1
- See more on Amazon...
Brand: JHEMCU | Manufacturer: JHEMCU
See On Amazon Similar To JHEMCU GF16 F405 Flight Controller
#1
PXN Flight simulator controls 2113 pc flight joystick controls with Vibration Function and Throttle Controls Wired Flight Stick for PC Windows XP/VISTA/7/8/10/Computer/Laptop(PC only)
Asin: B0831DLQFW | Ean: 0611864775166 | UPC: 611864775166
3. 【Connection Question】Please Open The Computer First, Then Connect The Pxn-2113 Joystick, Plug And Play, No Need To Install The Driver. If The Device Does Not Work, Please Download The Pxn2113 Driver, Please Visit The E-Pxn Official Website: Home - Support - Tool -Pxn Joysitck Sofware, Download And Install Driver, After Connecting, Please Enter The Game To Make The Game Interface Settings And Mode Selection If You There Is Any "Connection Problem", Please Give C-Zone Mail, Thank You.
5. 【Enjoy It】 Pxn-2113 Flight Controller Manipulate Swing Chasing Military Machine, Successfully Blocking, Aiming, Pulling Trigger, Shooting Is As Simple, Download Pxn-2113 Driver, Controller Software Supports Keyboard Button Setting, Dead Zone Adjustment, Button Mapping, Axial Map, Etc., Etc., According To The Game Needs To Create Your Personal Customization, The Flight Controller Design Is Ergonomic, And It Will Not Feel Tired For A Long Time..
4.【Multifunctional Design】 You Can Quickly Control, Direct Bitter Direction, To Achieve The Left, Right Upper Four Directions And 45 Degrees, Convenient For The Conversion Angle Of The Game, The Battle Is A Look, Four Axes (X / Y / Rz Axis) + Accelerate Valve + 12 Programmable Buttons + Eight-Way Cover, Integrated Vibration Motor, Motivation Experience During The Game, These Functional Configuration Allows You To Enjoy The Happiness Of The Game..
2.【Compatibility】:Pxn 2113 Flight Simulation Rocker Compatible With Pc / Desktop Computer / Notebook, Compatible With Windows 7/8/10 System, Suitable For Suitable For "Microsoft Flight Simulator 2020", "X-Plane 11," World Of Warplanes, "Ace Air Force", "War Thunder", "Ace Combat", "Eagle Strike Sky 2", And "Battlefield 1942", And All Pc Flight Simulation Games, [Note]: (Do Not Support Mac / Apple Computers / Apple Device / Ps3 / Ps4 / Xbox One / Ps5 / Nintendo Switch..
Features
- 1. Vibration Function According to the game scene The full rated vibration engine can produce different vibration effects, The vibration switch is located at the bottom of the joystick, please switch to "ON". If the vibration intensity is less than 20% Please set the vibration strength in the driver to 50% or higher) Compatible with almost flight games:World of Tanks,World of Warplanes,War Thunder,Assault Horizon,Microsoft Flight Simulator,X Plane 10,etc.(Note:Minecraft,Asphalt 8 not supported).
- 2. compatibility :PXN 2113 Flight Simulation Rocker Compatible with PC / Desktop Computer / Notebook, compatible with Windows 7/8/10 system, suitable for Suitable for Microsoft Flight Simulator 2020, X-Plane 11, World of Warplanes, Ace Air Force, War Thunder, Ace Combat, Eagle Strike Sky 2, And Battlefield 1942, And All PC Flight Simulation Games, [NOTE]: (Do Not Support Mac / Apple Computers / Apple Device / PS3 / PS4 / Xbox One / PS5 / NINTENDO SWITCH.
- 3. Connection Question Please open the computer first, then connect the PXN-2113 joystick, plug and play, no need to install the driver. If the device does not work, please download the PXN2113 driver, please visit the E-PXN official website: Home - Support - Tool -PXN JOYSITCK SOFWARE, download and install driver, after connecting, please enter the game to make the game interface settings and mode selection if you There is any connection problem, please give c-zone mail, thank you
- 4. Multifunctional Design You can quickly control, direct bitter direction, to achieve the left, right upper four directions and 45 degrees, convenient for the conversion angle of the game, the battle is a look, four axes (X / Y / RZ axis) + accelerate Valve + 12 programmable buttons + eight-way cover, integrated vibration motor, motivation experience during the game, these functional configuration allows you to enjoy the happiness of the game.
- 5. Enjoy it PXN-2113 flight controller manipulate swing chasing military machine, successfully blocking, aiming, pulling trigger, shooting is as simple, download PXN-2113 driver, controller software supports keyboard button setting, dead zone Adjustment, button mapping, axial map, etc., etc., according to the game needs to create your personal customization, the flight controller design is ergonomic, and it will not feel tired for a long time.
- See more on Amazon...
Brand: PXN | Manufacturer: PXN
See On Amazon #2
Speedybee F405 Wing Flight Controller: Support INAV Ardupilot APP Wireless Configuration 11 PWM Solder-free Multilayer FC PDB Board for RC FPV Plane Airplane VTOL Fixed-wing Tiltrotor Drone
Asin: B0C2T6KJYN
【Stable Performance】 Multilayer Board Design Ensures Reliable And Stable Operation During Flight..
【Advanced On-Board Features】 4-Level Battery Life Indicators, Current Sensor, 3 Bec Outputs, And 90° Pin Headers For A Lower Installation Profile..
【Expert Support】 For Any Issues, Please Contact Speedybee Technical Support First. We're Here For Prompt Assistance And Solutions..
【Enhanced Telemetry & Lighting】 Crsf Telemetry Data Display Via Lua Script, And 4X Led Strip Plugs For Stylish Illumination..
【Comprehensive Pin Breakout】 F405 Offers An All-Pin Breakout Design For Seamless Integration With Various Components..
Features
- Wireless Configuration & Easy Setup Effortlessly configure your flight controller with plug-and-play installation.
- Comprehensive Pin Breakout F405 offers an all-pin breakout design for seamless integration with various components.
- Stable Performance Multilayer board design ensures reliable and stable operation during flight.
- Enhanced Telemetry & Lighting CRSF telemetry data display via Lua script, and 4x LED strip plugs for stylish illumination.
- Advanced On-board Features 4-level battery life indicators, current sensor, 3 BEC outputs, and 90 pin headers for a lower installation profile.
- Expert Support For any issues, please contact SpeedyBee technical support first. We're here for prompt assistance and solutions.
- See more on Amazon...
Brand: SPEEDY BEE | Manufacturer: Speedybee
Dimensions: 0.39 x 0.79 x 1.18 inches | Weight: 0.11 Pounds
See On Amazon #3
SoloGood F722 FPV Flight Controller Stack ICM42688P F722 Flight Controller with 60A 4in1 ESC 30X30mm 2-6S for FPV Freestyle Drones Parts
Asin: B0CQJVGK14 | Ean: 0766157606648 | UPC: 766157606648
Four Led Status Indicators Display The Working Status Under Different States.
The Use Of Large Pads Ensures That The Pads Are Kept Away From Components To Ensure Perfect Soldering For Beginners.
Although The Flight Control Is Small, It Has All Five Internal Components. The F722 Main Control Chip, Onboard Osd Chip, Barometer, And Onboard Black Box Chip.
Integrated 5V/10V Dual Bec Ensures Stable Operation.
Features
- F722 Flight Controller Stack: Support up to 8 motor outputs to easily build X8 drones
- Integrated 5V/10V dual BEC ensures stable operation
- Four LED status indicators display the working status under different states
- Although the flight control is small, it has all five internal components. The F722 main control chip, onboard OSD chip, barometer, and onboard black box chip
- The use of large pads ensures that the pads are kept away from components to ensure perfect soldering for beginners
- See more on Amazon...
Brand: SoloGood | Manufacturer: SoloGood
Dimensions: 0.01 x 0.01 x 0.01 inches
See On Amazon #4
GoolRC GF30F722-ICM F722 F7 HD Baro OSD 5V 10V Dual BEC Flight Controller 3-8S 30.5X30.5mm for Remote Control FPV Freestyle Drone Parts
Asin: B0C49V1YP6
Mos Adopts Imported 30V High Current Resistance Mos, Long Life And Strong Load Capacity..
Using High-Quality Japanese Murata Capacitors, Strong Filtering Performan..
Using Industrial Grade Ldo, High Temperature Resistance..
The Pcb Adopts High-End 8-Layer 2Oz Thick Copper Skin, Which Has Stronger Overcurrent Capability And Good Heat Dissipation..
Features
- GF30F722-ICM F722 F7 HD Baro OSD 5V 10V Dual BEC Flight Controller 3-8S 30.5X30.5mm for Remote Control FPV Freestyle Drone Parts
- The PCB adopts high-end 8-layer 2oZ thick copper skin, which has stronger overcurrent capability and good heat dissipation.
- MOS adopts imported 30V high current resistance mos, long life and strong load capacity.
- Using industrial grade LDO, high temperature resistance.
- Using high-quality Japanese Murata capacitors, strong filtering performan.
- See more on Amazon...
Brand: GoolRC | Manufacturer: GoolRC
See On Amazon #5
FS-SM001 New RC Flight Simulator Controller 8-CH RC Airplane Simulator Supports a Variety of Flight Simulation Software for Airplane Real Flight simulators
Asin: B0C4P9F4RP
Compatible Operating Systems: 32-Bit And 64-Bit Systems Such As Xp, Win7, Win8, Win10, Win11 (Desktop Or Laptop)..
Sm001 Supports Left And Right Hand Throttle Switching, Easy And Fast To Change To Get A Pleasant Playing Experience..
Suitable For Aircraft Types: Helicopters, Fixed-Wing Aircraft, Gliders, 3D Stunt Planes, And Cross-Country Aircraft, Etc..
Features
- Channels: 6~8-CH
- Suitable for aircraft types: helicopters, fixed-wing aircraft, gliders, 3D stunt planes, and cross-country aircraft, etc.
- Compatible operating systems: 32-bit and 64-bit systems such as XP, WIN7, WIN8, WIN10, WIN11 (desktop or laptop).
- SM001 supports left and right hand throttle switching, easy and fast to change to get a pleasant playing experience.
- See more on Amazon...
Brand: Fms
See On Amazon #6
SoloGood F405 Flight Controller 30.5 * 30.5MM for FPV Freestyle Drones DIY Quadcopter
Asin: B0CX8PMLB3 | Ean: 0766157605863 | UPC: 766157605863
Equipped With Onboard Barometer And Black Box To Record More Flight Data.
Can Be Widely Used For Fpv Four Axis Racing Or Long-Range Racks Such As 5-Inch, 7-Inch, 9-Inch, Etc.
Two Bec Outputs Of 5V/10V Can Provide Power To More Devices, Making Installation More Convenient.
Flight Control Supports Dji High-Definition Image Transmission Connection And Is Also Suitable For Analog Image Transmission Connection. The Compatibility Is Good.
Features
- Firmware Name:SOLOGOOD F405.Reliable performance and strong processing power
- Flight control supports DJI high-definition image transmission connection and is also suitable for analog image transmission connection. The compatibility is good
- Equipped with onboard barometer and black box to record more flight data
- Two BEC outputs of 5V/10V can provide power to more devices, making installation more convenient
- Can be widely used for FPV four axis racing or long-range racks such as 5-inch, 7-inch, 9-inch, etc
- See more on Amazon...
Brand: SoloGood | Manufacturer: SoloGood
Dimensions: 0.01 x 0.03 x 0.01 inches
See On Amazon #7
Axisflying Argus PRO F7 Flight Controller Stack 55A 30x30 FPV Drone FC Stack with 4in1 55A ESC BL32 for 3-6S FPV Drone Support BF INAV
Asin: B0C49QP693 | Ean: 0751501048564 | UPC: 751501048564
Integrated Dual Bec, Support Dji O3 Air Unit Air Unit Direct Connection.
The Argus 55A Pro 4In1 F7 Flight Controller Supports Inav ..
The Fc Supports Up To 8 Motor Outputs, Easily Build Your X8 Drone.
No Welding, More Peace Of Mind. With This Fc, Hd Air Unit, Analog Camera, Gps And Other Common Peripherals All Support Direct Plug-In.
Features
- CNC Full aluminum cover wrapped, enlarge the radiating surface, rapid heat dissipation, more stable work,High-quality and large-size MOSFETs are selected, with low internal resistance and low heat generation, which brings more stable power performance.
- No welding, more peace of mind. With this FC, HD Air unit, analog camera, GPS and other common peripherals all support direct plug-in
- Integrated dual BEC, support DJI O3 Air Unit air unit direct connection
- The FC supports up to 8 motor outputs, easily build your X8 drone
- The Argus 55A Pro 4IN1 F7 Flight Controller supports INAV .
- See more on Amazon...
Brand: SoloGood | Manufacturer: axisflying
Dimensions: 1.20 x 2.00 x 2.00 inches | Weight: 0.13 Pounds
See On Amazon #8
MicoAir405 Flight Controller with BMI088 SPL06 Support Ardupilot INAV For FPV drone
Asin: B0CLXJ8TLH
3. Rich And Convenient Interface Design: The Micoair405v2 Offers 6 Uarts, 10 Pwm Outputs, I2c, Swd, And Usb Type-C Interfaces, Supporting A Wide Range Of External Device Connections. All Interfaces Utilize Socket Connections, Greatly Simplifying The Installation Process And Avoiding The Complexity And Potential Issues Of Soldering..
7. Pwm Output And Battery Monitoring: Supports Up To 10 Pwm Outputs And Has Precise Battery Monitoring Capabilities Suitable For Up To 6S Lipo Batteries, Enhancing Flight Reliability And Safety..
8. Compact And Lightweight Design: Optimized Size And Weight Make The Micoair405 Suitable For A Wide Range Of Drones, From Small Racing Drones To Larger Uavs, Providing Outstanding Flight Performance Without Adding Unnecessary Burden..
5. Advanced Uart Mapping And Rc Input Configuration: Detailed Uart Mapping And Flexible Rc Input Configurations Offer Compatibility With A Variety Of Protocols And Devices, Making It Easy To Integrate The Flight Control System Into Custom Drone Builds..
6. Osd And Vtx Support: Integrated Osd Support And Vtx Support For The Dji O3 Air Unit Ensure An Optimized Fpv Flying Experience Without The Need For Additional Modules..
4. Dual Bec Outputs: Featuring 5V 3A And 9V 3A Bec Outputs, It Provides Flexible And Reliable Power Solutions For The Flight Control System And Other Electronic Devices..
2. Pioneer In Integrating The Bmi088 Imu: The Micoair405v2 Is The First Flight Controller Compatible With Inav Firmware That Incorporates The Bmi088 Imu, Renowned For Its Excellent Stability, High Measurement Accuracy, And Good Vibration Resistance. This Advanced Imu Significantly Enhances The Positioning Accuracy Of Drones In Position Mode, Making The Micoair405v2 An Ideal Choice For Users Seeking High-Performance Flight Experiences..
Features
- 1. Compatibility with Open-Source Flight Control Firmware: The MicoAir405v2 Flight Controller is compatible with two popular open-source flight control firmwares - INAV and Ardupilot, offering users a wide range of flight control options and customization capabilities. Firmware updates through Mission Planner are straightforward for Ardupilot, or firmware can be customized via the ArduPilot Custom Firmware Builder to meet professional flight requirements.
- 2. Pioneer in Integrating the BMI088 IMU: The MicoAir405v2 is the first flight controller compatible with INAV firmware that incorporates the BMI088 IMU, renowned for its excellent stability, high measurement accuracy, and good vibration resistance. This advanced IMU significantly enhances the positioning accuracy of drones in position mode, making the MicoAir405v2 an ideal choice for users seeking high-performance flight experiences.
- 3. Rich and Convenient Interface Design: The MicoAir405v2 offers 6 UARTs, 10 PWM outputs, I2C, SWD, and USB Type-C interfaces, supporting a wide range of external device connections. All interfaces utilize socket connections, greatly simplifying the installation process and avoiding the complexity and potential issues of soldering.
- 4. Dual BEC Outputs: Featuring 5V 3A and 9V 3A BEC outputs, it provides flexible and reliable power solutions for the flight control system and other electronic devices.
- 5. Advanced UART Mapping and RC Input Configuration: Detailed UART mapping and flexible RC input configurations offer compatibility with a variety of protocols and devices, making it easy to integrate the flight control system into custom drone builds.
- 6. OSD and VTX Support: Integrated OSD support and VTX support for the DJI O3 Air Unit ensure an optimized FPV flying experience without the need for additional modules.
- 7. PWM Output and Battery Monitoring: Supports up to 10 PWM outputs and has precise battery monitoring capabilities suitable for up to 6S LiPo batteries, enhancing flight reliability and safety.
- 8. Compact and Lightweight Design: Optimized size and weight make the MicoAir405 suitable for a wide range of drones, from small racing drones to larger UAVs, providing outstanding flight performance without adding unnecessary burden.
- See more on Amazon...
Brand: Generic | Manufacturer: ROBOFUSION
Dimensions: 0.31 x 1.41 x 1.41 inches | Weight: 0.02 pounds
See On Amazon #9
MicoAir F405 V2 Flight Controller Stack with 4in1 50A Bluejay 48K ESC FC&ESC Support Ardupilot/INAV for DJI O3 Air Unit FPV(Ardupilot)
Asin: B0CYV5RLFX | Model: F405V2 | PartNumber: F405V2
Brand: Generic | Manufacturer: ROBOFUSION
Dimensions: 0.60 x 1.18 x 1.18 inches | Weight: 0.11 Pounds
See On Amazon #10
F405 Flight Controller Stack 30x30 FC FPV Stack with 4 in one 3~6S ESC 60A BLHeli_S Brushless ESC for Freestyle Drone Quadcopter & Fixed-Wing
Asin: B0CCR3KMT3
The Continuous Current Of 60A 4 In 1 Esc Is 60A*4, The The Burst Current Is 65A For 10 Seconds. Support Dshot300, 600 Pwm Control Signal..
Built-In Type-C Socket, You Can Connect The Flight Controller Stack With Your Computer To Change The Data That You Want. The Firmware Is Betaflight Configurator And Inav..
The Mounting Size Is 30.5 X 30.5Mm And The Hole Diameter Is 4Mm, Which Is Suitable For Most Models In The Market. You Can According To It Choose Whether It Is Fit Your Models Or Not..
Equipped With Some Pads To Support Soldering Up The Led Strip And Gps. After You Solder Up Them, You Can Fly Your Model At Night And Check Where Is It, Which Is Very Convenience..
Features
- Built with the firm STM32F405 MCU, ICM42688 and large motor pads which makes you can solder up your motors easily and brings a smooth flight experience.
- Equipped with some pads to support soldering up the LED strip and GPS. After you solder up them, you can fly your model at night and check where is it, which is very convenience.
- The continuous current of 60A 4 in 1 ESC is 60A*4, the the burst current is 65A for 10 seconds. Support Dshot300, 600 PWM control signal.
- The mounting size is 30.5 x 30.5mm and the hole diameter is 4mm, which is suitable for most models in the market. You can according to it choose whether it is fit your models or not.
- Built-in type-c socket, you can connect the flight controller stack with your computer to change the data that you want. The firmware is Betaflight Configurator and INAV.
- See more on Amazon...
Brand: F FLASH HOBBY | Manufacturer: F FLASH HOBBY
Dimensions: 0.59 x 1.67 x 1.46 inches
See On Amazon #11
SpeedyBee F405 Wing Flight Controller Stack, APP Control, INAV Ardupilot Support, Plug and Play, Multilayer Wireless FC PDB Board for RC FPV Drone VTOL Fixed-Wing Tiltrotor Airplane Plane
Asin: B0D1Y9DXVM
3-Layer Circuit Board Design: The Multi-Layer Circuit Board Design Provides Different Layers Of Circuit Boards, Making It Easy To Assemble With A Three-In-One Design. This Avoids Multiple Circuit Connections Causing Circuit Board Shorts, Providing You With A Safer, More Reliable, And Stable Flight Experience..
Inav And Ardupilot Dual Firmware Support: The Board Supports Both Inav And Ardupilot Firmware, Allowing Wireless Adjustment Of Various Flight Parameters. It Supports Various Modes Of Play, Such As Wing Racing, Fpv Formation Flying, Autopilot And Long-Range Flights, Vertical Takeoff And Landing, Etc..
Multiple Wireless Remote-Control Methods: This Flight Control Board Supports Multiple Control Methods. You Can Remotely Control Your Aircraft Wirelessly, And Effortlessly Configure Various Flight Parameters, And It Supports Not Only App Control But Also Ble, Wi-Fi, And Bluetooth Connections, Providing You With A Multi-Scenario And Multi-Mode Remote Control Solution..
Features
- 2 EASY INSTALLATION MODES: The flight control board is designed with two installation modes. The front side features a full pin connection design, allowing easy connection to various external devices, just plug and play. The back side is equipped with clear soldering points, enabling precise soldering.
- MULTIPLE WIRELESS REMOTE-CONTROL METHODS: This flight control board supports multiple control methods. You can remotely control your aircraft wirelessly, and effortlessly configure various flight parameters, and it supports not only app control but also BLE, Wi-Fi, and Bluetooth connections, providing you with a multi-scenario and multi-mode remote control solution.
- 3-LAYER CIRCUIT BOARD DESIGN: The multi-layer circuit board design provides different layers of circuit boards, making it easy to assemble with a three-in-one design. This avoids multiple circuit connections causing circuit board shorts, providing you with a safer, more reliable, and stable flight experience.
- INAV AND ARDUPILOT DUAL FIRMWARE SUPPORT: The board supports both INAV and Ardupilot firmware, allowing wireless adjustment of various flight parameters. It supports various modes of play, such as wing racing, FPV formation flying, autopilot and long-range flights, vertical takeoff and landing, etc.
- See more on Amazon...
Brand: DashRC | Manufacturer: SpeedyBee
Dimensions: 0.75 x 2.05 x 1.26 inches
See On Amazon #12
SoloGood F722 Flight Controller HD Baro OSD 5V 10V Dual BEC for DJI Digital Image Transmission FPV Fancy Racing Flight
Asin: B0CX8Y4FQH | Model: F405-01 | PartNumber: F405-01 | Ean: 0766157605849 | UPC: 766157605849
Integrated Gyroscope, Barometer, Osd.
Package Includes: Installation Of M3 Shock Absorber Balls, Connecting Wires.
Firmware Name: Betaflight: Sologoodf722, Mounting Hole Spacing 30.5 * 30.5Mm.
Large Solder Pad Design, Convenient For Beginners To Weld.
Features
- Supports 8 motor outputs, integrated with 5V/10V dual BEC
- Large solder pad design, convenient for beginners to weld
- Integrated gyroscope, barometer, OSD
- Firmware name: BETAFLIGHT: SOLOGOODF722, mounting hole spacing 30.5 * 30.5mm
- Package includes: installation of M3 shock absorber balls, connecting wires
- See more on Amazon...
Brand: SoloGood | Manufacturer: SoloGood
Dimensions: 0.01 x 0.01 x 0.01 inches | Weight: 0.18 pounds
See On Amazon #13
SpeedyBee F405 Wing Flight Controller Stack: Support INAV Ardupilot APP Wireless Configuration 11 PWM Solder-Free Multilayer FC PDB Board
Asin: B0CZ3KQTMF
【Stable Performance】 Multilayer Board Design Ensures Reliable And Stable Operation During Flight..
【Advanced On-Board Features】 4-Level Battery Life Indicators, Current Sensor, 3 Bec Outputs, And 90° Pin Headers For A Lower Installation Profile..
【Expert Support】 For Any Issues, Please Contact Speedybee Technical Support First. We're Here For Prompt Assistance And Solutions..
【Enhanced Telemetry & Lighting】 Crsf Telemetry Data Display Via Lua Script, And 4X Led Strip Plugs For Stylish Illumination..
【Comprehensive Pin Breakout】 F405 Offers An All-Pin Breakout Design For Seamless Integration With Various Components..
Features
- Wireless Configuration & Easy Setup Effortlessly configure your flight controller with plug-and-play installation.
- Comprehensive Pin Breakout F405 offers an all-pin breakout design for seamless integration with various components.
- Stable Performance Multilayer board design ensures reliable and stable operation during flight.
- Enhanced Telemetry & Lighting CRSF telemetry data display via Lua script, and 4x LED strip plugs for stylish illumination.
- Advanced On-board Features 4-level battery life indicators, current sensor, 3 BEC outputs, and 90 pin headers for a lower installation profile.
- Expert Support For any issues, please contact SpeedyBee technical support first. We're here for prompt assistance and solutions.
- See more on Amazon...
Brand: SPEEDY BEE | Manufacturer: SpeedyBee
See On Amazon #14
Matek F405 WTE Flight Controller STM32F405RGT6 Built in OSD SD Slot DPS310 for RC FPV Racing Drone
Asin: B0B1PY5QRG | Ean: 0736961513401 | UPC: 736961513401
Esp Wifi Telemetry/Elrs 2.4G Receiver, 6Xuarts, 12X Pwm,1Xi2c.
Current Senor: 220A, 3.3V Adc (Scale 150 In Inav, 66.7 A/V In Ardupilot), Mounting: 25 X 25Mm, Φ2mm.
Mcu: Stm32f405rgt6, 168Mhz , 1Mb Flash, Imu: Icm42688-P,Baro: Spl06-001, Osd: At7456e, Blackbox: Microsd Card Slot.
Features
- Matek Flight Controller F405-WTE : Upgraded Flight Controller,it is designed specially for fixed wing
- MCU: STM32F405RGT6, 168MHz , 1MB Flash, IMU: ICM42688-P,Baro: SPL06-001, OSD: AT7456E, Blackbox: MicroSD card slot
- ESP WIFI telemetry/ELRS 2.4G receiver, 6xUARTs, 12x PWM,1xI2C
- Current Senor: 220A, 3.3V ADC (Scale 150 in INAV, 66.7 A/V in ArduPilot), Mounting: 25 x 25mm, 2mm
- See more on Amazon...
Brand: SoloGood | Manufacturer: matek
See On Amazon #15
SoloGood Matek Systems F411-WTE F4 Flight Controller 100MHz STM32F411CEU6 Built-in OSD 2-6S for RC FPV Plane Airplane VTOL Fixed-Wing DIY Accessories Parts
Asin: B09YXSZ246 | Model: Matek F411-WTE F4 Flight Controller | PartNumber: Matek F411-WTE F4 Flight Controller | Ean: 0736961513357 | UPC: 736961513357
2+4 Pwm,4X Adc, Current Sensor:132A, Pinio:2(Camera,Vbat Power).
Inav Target: Matekf411te ( Icm42688p Version Is Supported By Inav 6.0 Or Newer).
Regulators:5V 1.5A, Vx (5V/6V)5A, Usb:Vertical Type-C, Dimensions: 31 X 26 X 16.5 Mm,Weight: 10G.
Icm42688p, Barometer: Spl06-001, Uarts Softserial: 2X Uarts, 2X Full Softserial.
Features
- Product Name: Matek F411-WTE Flight Controller STM32F411CEU6 OSD 2-6S Lipo
- ICM42688P, Barometer: SPL06-001, UARTs Softserial: 2x UARTs, 2x Full Softserial
- 2+4 PWM,4x ADC, Current sensor:132A, PINIO:2(Camera,VBat Power)
- Regulators:5v 1.5A, Vx (5V/6V)5A, USB:Vertical Type-C, Dimensions: 31 x 26 x 16.5 mm,Weight: 10g
- INAV Target: MATEKF411TE ( ICM42688P version is supported by INAV 6.0 or newer)
- See more on Amazon...
Brand: SoloGood | Manufacturer: matek
Weight: 0.02 pounds
See On Amazon #16
MINGCHUAN JHEMCU GF16 2-4S Stack MPU6000 F405 Baro OSD BlackBox Flight Controller BLHELIS 13A 4in1 ESC for FPV Micro Drone (13A 4in1 ESC)
Asin: B09XDYG921
Receiver: Elrs (Crsf), Tbs (Crsf), Sbus, Ibus, Ds M2, Ds Mx. Support Programmable Led Such As Ws2812.
Support Dshot600, Dshot300, Dshot150, Oneshot125, Multishot, Pwm Control Signals.
We Added The Popular And Reliable Micro Usb And Therefore The Same Standard Than Your Module..
Leave The Ws2812 Interface. Built-In Black Box 16Mb And Barometer, Buzzer Interface, Camera Interface..
Features
- GF16 flying tower is a 2-4S F405 flying tower, with 5 serial ports (UART1, UART2, UART3, UART4, UART6), 8 motor ports, one I2C port, and one SBUS interface (the serial port used by SBUS is RX1).
- Leave the WS2812 interface. Built-in black box 16MB and barometer, buzzer interface, camera interface.
- Receiver: ELRS (CRSF), TBS (CRSF), SBUS, IBUS, DS M2, DS MX. Support programmable LED such as WS2812
- We added the popular and reliable Micro USB and therefore the same standard than your module.
- Support Dshot600, Dshot300, Dshot150, Oneshot125, Multishot, PWM control signals
- See more on Amazon...
Brand: MINGCHUAN | Manufacturer: MINGCHUAN
See On Amazon #17
Generic MicoAir F405 V2 Flight Controller Stack with 4-6S 50A 48K Electronic Speed Controller Support Ardupilot/INAV (INAV)
Asin: B0CYVDSJ6D | Model: F405V2 | PartNumber: F405V2
3. Simplified Installation Process: The Micoair F405v2 Offers 6 Uarts, 10 Pwm Outputs, I2c, Swd, And Usb Type-C Interfaces, Supporting A Wide Range Of External Device Connections. All Interfaces, Including The Electronic Speed Controller, Utilize Socket Connections, Greatly Simplifying The Installation Process And Avoiding The Complexity And Potential Issues Of Soldering..
7. Flexible Installation And Applicability: The Compact And Lightweight Design Of The Flight Controller And The Multi-Specification Fixed Mounting Hole Design Of The Electronic Speed Controller Provide Flexible Installation Options And Broad Applicability, Thus Fitting Different Sizes And Types Of Drone Frames..
5. Enhanced Fpv Flying Experience: The Flight Controller's Integrated Osd Support And Vtx Compatibility With The Dji O3 Air Unit, Along With The Electronic Speed Controller's Low-Noise Characteristics, Provide A Cleaner Power Supply For The Dji O3 Air Unit, Ensuring Good Eis Effects..
6. Advantages Of Bundle Purchasing: Integrating The Flight Controller With The Electronic Speed Controller Not Only Ensures Perfect Compatibility Between Systems But Also Simplifies The Installation Process. Additionally, Purchasing The Bundle Offers A More Favorable Price Than Buying Each Component Separately, Saving Costs..
4. High-Performance Mosfet Devices: The Electronic Speed Controller Uses 40V 165A Rds=1.1Mr Mosfet Devices, Key To Enhancing Electronic Speed Controller Performance. An Rds(On) As Low As 1.1Mr Means Minimal Internal Resistance During Current Flow, Reducing Energy Loss, Increasing Efficiency, And Resulting In Lower Heat Generation And Better Load Capacity. Especially During Long Periods Of High Load, This Significantly Lowers Failure Rates And Extends Lifespan..
2. Pioneering Integration Of The Bmi088 Imu: The Micoair F405v2 Is The First Flight Controller To Incorporate The Bmi088 Imu And Be Compatible With Inav Firmware. This Imu Is Renowned For Its Excellent Stability, High Measurement Accuracy, And Good Vibration Resistance. Combined With The Electronic Speed Controller's Bluejay 48K Firmware To Reduce Electrical Noise Interference, It Can Significantly Enhance The Positioning Accuracy Of Drones In Position Mode..
Features
- 1. Open-Source Flight Control Firmware Compatibility: The MicoAir F405v2 Flight Controller supports two popular open-source flight control firmwares - INAV and Ardupilot, offering users a wide range of flight control options and customization capabilities. Firmware updates are easily done through Mission Planner or INAV Configurator.
- 2. Pioneering Integration of the BMI088 IMU: The MicoAir F405v2 is the first flight controller to incorporate the BMI088 IMU and be compatible with INAV firmware. This IMU is renowned for its excellent stability, high measurement accuracy, and good vibration resistance. Combined with the Electronic Speed Controller's BlueJay 48K firmware to reduce electrical noise interference, it can significantly enhance the positioning accuracy of drones in position mode.
- 3. Simplified Installation Process: The MicoAir F405v2 offers 6 UARTs, 10 PWM outputs, I2C, SWD, and USB Type-C interfaces, supporting a wide range of external device connections. All interfaces, including the Electronic Speed Controller, utilize socket connections, greatly simplifying the installation process and avoiding the complexity and potential issues of soldering.
- 4. High-Performance MOSFET Devices: The Electronic Speed Controller uses 40V 165A RDS=1.1mR MOSFET devices, key to enhancing Electronic Speed Controller performance. An RDS(ON) as low as 1.1mR means minimal internal resistance during current flow, reducing energy loss, increasing efficiency, and resulting in lower heat generation and better load capacity. Especially during long periods of high load, this significantly lowers failure rates and extends lifespan.
- 5. Enhanced FPV Flying Experience: The flight controller's integrated OSD support and VTX compatibility with the DJI O3 Air Unit, along with the Electronic Speed Controller's low-noise characteristics, provide a cleaner power supply for the DJI O3 Air Unit, ensuring good EIS effects.
- 6. Advantages of Bundle Purchasing: Integrating the flight controller with the Electronic Speed Controller not only ensures perfect compatibility between systems but also simplifies the installation process. Additionally, purchasing the bundle offers a more favorable price than buying each component separately, saving costs.
- 7. Flexible Installation and Applicability: The compact and lightweight design of the flight controller and the multi-specification fixed mounting hole design of the Electronic Speed Controller provide flexible installation options and broad applicability, thus fitting different sizes and types of drone frames.
- See more on Amazon...
Brand: Generic | Manufacturer: ROBOFUSION
Dimensions: 0.60 x 1.18 x 1.18 inches | Weight: 0.11 Pounds
See On Amazon #18
Autopilot APE4100 Eclipse F60 Digital Environmental Controller, White
Asin: B07MCW9TRK | Model: APE4100 | PartNumber: APE4100 | Ean: 0638104021579 | UPC: 638104021579
Separate Day/Night Temperature And Humidity Set Points.
Cycle Timer Is Programmable Down To 1 Second.
Cycle Timer Outlet Modes: Day Only/Night Only/24 Hours.
Operates Temperature And Humidity Outlets Independently Or Synchronized.
Features
- 4 outlets control temperature (heating & cooling), humidity and a cycle timed device
- Operates temperature and humidity outlets independently or synchronized
- Separate day/night temperature and humidity set points
- Cycle timer outlet modes: day only/night only/24 hours
- Cycle timer is programmable down to 1 second
- See more on Amazon...
First Available: 09/25/2018
Brand: Autopilot | Manufacturer: Autopilot
Dimensions: 6.00 x 10.50 x 10.40 inches
Warranty: 1 year warranty
See On Amazon #19
QWinOut Newest PIKO BLX Betaflight Micro Flight Controller for DIY Indoor Mini Micro FPV Quadcopter Racing Drone F3 CleanFlight
Asin: B01MSK7Q4I | Ean: 0612677823563 | UPC: 612677823563
Ultra Light, Astonishingly Small And Packed With Massive Levels Of Performance Capability, The Piko Blx Is The One And Only Flight Controller That Is Ready & Waiting To Devastate The Micro Fpv Competition..
Unlike Any Other System Available Today, The Piko Blx Provides An All In One Solution That Brings Forth The Ultimate In Simplified Sophistication, Utilizing Industry Leading Technology That Has Never Been Seen In A System This Compact..
Designed Nothing Short Of Revolutionary, The Piko Blx Micro Flight Controller Changes Everything - The True Ultimate In The Insanity Fueled Micro Fpv Racing Scene..
Features
- PIKO BLX Micro Flight Controller FC for FPV Quad Race F3 CleanFlight
- Designed nothing short of revolutionary, the PIKO BLX Micro Flight Controller changes everything - the true ultimate in the insanity fueled micro FPV racing scene.
- Ultra light, astonishingly small and packed with massive levels of performance capability, the PIKO BLX is the one and only flight controller that is ready & waiting to devastate the micro FPV competition.
- Unlike any other system available today, the PIKO BLX provides an all in one solution that brings forth the ultimate in simplified sophistication, utilizing industry leading technology that has never been seen in a system this compact.
- See more on Amazon...
Brand: QWinOut | Manufacturer: QWinOut
See On Amazon
Looking For Something Else?
Search