Kingroon PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool(2.2lbs), 1.75 mm, White
Asin: B0BR81QQRJ | Model: yyds1 | PartNumber: yyds1 | Ean: 0793127238363 | UPC: 793127238363
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.No Edge Warping, Fluidity And Smooth Discharge: High-Precision Printing, High Translucency, No Edge Warping, No Clogs, No Bubbles..
Petg Filament Setting Recommendations: Printing Temperature 210-230°C (230°C Recommended), Build Plate Temperature 65-80°C,Printing Speed 40-80Mm/S.
Strong Impact Resistance: With Outstanding Toughness And High Resistance, Petg Combines The Good Mechanical Properties Of Abs With High Toughness. At The Same Time, It Has Good Printing Performance That Pla Is Easy To Use And Not Easy To Warp..
Features
- Transparency and stability:The surface of the PETG filament has good gloss, the layer lines are seamless, and invisible, it is not easy to absorb moisture, the stability is good, and it is hard to produce cracks.
- Strong impact resistance: With outstanding toughness and high resistance, PETG combines the good mechanical properties of ABS with high toughness. At the same time, it has good printing performance that PLA is easy to use and not easy to warp.
- No edge warping, fluidity and smooth discharge: High-precision printing, high translucency, no edge warping, no clogs, no bubbles.
- PETG Filament Setting Recommendations: Printing temperature 210-230 C (230 C recommended), Build plate temperature 65-80 C,Printing speed 40-80mm/s
- See more on Amazon...
Brand: Kingroon | Manufacturer: Kingroon
Weight: 2.20 Pounds
Warranty: 1 year
See On Amazon Similar To Kingroon PETG 3D Printer Filament
#1
OVERTURE PETG Filament 1.75mm, 3D Printer Filament, 1kg Filament (2.2lbs), Dimensional Accuracy Probability +/- 0.02 mm, Fit Most FDM Printers (Black (1-Pack))
Asin: B07PGYHYV8 | Model: OVPETG175 | PartNumber: OVPETG175 | Ean: 0850006233403 | UPC: 850006233403
【Dimensional Accuracy & Consistency】Advanced Ccd Diameter Measuring And Self-Adaptive Control System In The Manufacturing Insure These Tough Pla Filaments To Be Strict Tolerances. Diameter 1.75Mm, Dimensional Accuracy (98%) + / - 0.02 Mm Without Any Exaggeration.
【Risk-Free & Lifetime Service】 Discover Worry-Free 3D Printing With Overture Filament—Backed By Our Lifetime Satisfaction Service. No Matter The Challenges, We're Here To Support You For A Seamless 3D Printing Experience. Trust Overture As Your Dependable Supplier Of 3D Printing Filaments And Accessories.
【Wide Compatibility And Color Selection】 Overture Filaments Seamlessly Integrates With Consumer And Industrial 3D Printers. Explore Your Creative Side With Our Extensive Selection Of Vibrant Colors, Ensuring A Spectrum Of Possibilities For Your Unique Creations.
【Clog-Free & Bubble-Free】 Designed And Manufactured With Our Patented Clog-Free Formula To Get A Smooth And Seamless Printing Experience. All Spools Undergo Thorough Drying For 24 Hours Before Packaging And Are Vacuum-Sealed In Resealable Foil Packaging. To Maintain Optimal Performance, Store Petg Filament In Sealed Storage With Desiccants (Silica Gel) Or Dry For >6 Hours At 65˚C.
Features
- High Performance & Compatibility Combines the advantages of both PLA and ABS with Overture PETG, featuring the ease of printing with PLA and improved mechanical properties of ABS, including enhanced impact resistance and superior layer adhesion
- Clog-Free & Bubble-Free Designed and manufactured with our patented clog-free formula to get a smooth and seamless printing experience. All spools undergo thorough drying for 24 hours before packaging and are vacuum-sealed in resealable foil packaging. To maintain optimal performance, store PETG filament in sealed storage with desiccants (silica gel) or dry for >6 hours at 65 C
- Dimensional Accuracy & Consistency Advanced CCD diameter measuring and self-adaptive control system in the manufacturing insure these tough PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy (98%) + / - 0.02 mm without any exaggeration
- Wide Compatibility and Color Selection Overture filaments seamlessly integrates with consumer and industrial 3D printers. Explore your creative side with our extensive selection of vibrant colors, ensuring a spectrum of possibilities for your unique creations
- Risk-Free & Lifetime Service Discover worry-free 3D printing with Overture filament backed by our lifetime satisfaction service. No matter the challenges, we're here to support you for a seamless 3D printing experience. Trust Overture as your dependable supplier of 3D printing filaments and accessories
- See more on Amazon...
Brand: OVERTURE | Manufacturer: OVERTURE
Weight: 2.20 pounds
See On Amazon #2
ELEGOO PLA Filament 1.75mm Yellow 1KG, 3D Printer Filament Dimensional Accuracy +/- 0.02mm, 1kg Cardboard Spool(2.2lbs) 3D Printing Filament Fits for Most FDM 3D Printers
Asin: B0BM72Z1X5
【Less-Tangle And Easy To Use】Full Mechanical Winding And Strict Manual Examination To Ensure That The Line Is Neatly Arranged And Less Tangled, And To Avoid Possible Snap And Line Breaking. A Larger Spool Inner Diameter Design For Easy Feeding.
【Wide Compatibility】Universal Compatibility With Most Of The Common 1.75Mm Fdm 3D Printers. Elegoo 3D Printer Filament Offers A Range Of Colors To Boost Your Creativity And Is Essential For Your Printing Projects.
【Clog-Free & Bubble-Free】Designed And Manufactured With Superb Layer Bonding And Great Fluidity For Smooth And Stable Extrusion. Complete Dried For Before Packaging And Vacuum Sealed Well To Protect The Filament From Moisture, No Clogging And Bubbling Problems.
【Dimensional Accuracy & Consistency】 Strict Tolerances Guarantee These Pla Filaments Of 1.75 Mm Diameter Much Smoother And More Stable Printing With The Dimensional Accuracy Of +/- 0.02 Mm, 1 Kg Spool (2.2Lbs).
Features
- High-Quality PLA Filaments Made of high-quality PLA, a commonly used thermoplastic material features lower melting temperature and ease of use, low warp and shrinkage, odorless during printing, and provides a glossy surface finish
- Dimensional Accuracy & Consistency Strict tolerances guarantee these PLA filaments of 1.75 mm diameter much smoother and more stable printing with the dimensional accuracy of +/- 0.02 mm, 1 kg spool (2.2lbs)
- Less-tangle and Easy to Use Full mechanical winding and strict manual examination to ensure that the line is neatly arranged and less tangled, and to avoid possible snap and line breaking. A larger spool inner diameter design for easy feeding
- Clog-Free & Bubble-Free Designed and manufactured with superb layer bonding and great fluidity for smooth and stable extrusion. Complete dried for before packaging and vacuum sealed well to protect the filament from moisture, no clogging and bubbling problems
- Wide Compatibility Universal compatibility with most of the common 1.75mm FDM 3D printers. ELEGOO 3d printer filament offers a range of colors to boost your creativity and is essential for your printing projects
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
Weight: 2.20 pounds
Warranty: 30 day guarantee for any quality reasons
See On Amazon #3
Comgrow 3D Printer Filament Dryer Box, Comgrow 3D Filament Storages, Keeping Filaments Dry During 3D Printing, Compatible with 1.75mm/2.85mm PLA PETG ABS Material, Filament Dehydrator, Spool Holder
Asin: B098D366R3 | Model: AK36WG-1200400J | PartNumber: AK36WG-1200400J
Filament Dryer And Remove Moisture - Comgrow 3D Printer Filament Dryer Box Is Designed To Keep Filament Dry And Remove Moisture From Kinds Of Filaments. Internal Heating During Printing Provides A Dry Storage Environment For 3D Printer Filaments And Keeps The Filament Dry. Avoid Entanglement, Clogging, Poor Adhesion, And Layer Migration Caused By The Dampness Of The Printing Wire. (Note: Only Used For The Drying Of 3D Printer Filament).
Great Sealed Filament Dry Box -The Outlet Structure Adopts A Silicone Cable Sheath And Teflon Tube, The Outlet Is Smooth And Can Be Covered With A Plug When Not In Use. The Upper Cover Has A Snap Button Structure, And The Sealing Performance Is Good..
How To Set The Filament - Place The Filament Into The Filament Outlet. Please Note That The Direction Is Placed Counterclockwise So That The Pulley At The Bottom Can Feed Better..
Real-Time Monitoring Of Temperature And Humidity - Adjustable Temperature Range 40°~ 50 °C, Setting Time From 6 Hours To 12 Hours. A 2-Inch Lcd Screen And Touch Buttons Make It Easy To Operate, It Is More Comprehensive And Clear Of The Information Display. Press The Power Button To Start, And Hold The Function Button(M) To Change The Dry Time And The Temperature Setting..
Setting Notes - Set The Temperature And Duration After Turning On The Filament Dehydrator. The Machine Will Work Only When The Work State Is Displayed On The Screen. If The Work Mode Is Not Displayed, The Motherboard Will Automatically Shut Down After 3 Minutes. If You Have Any Unsolvable Problems With The Comgrow Filament Dryer Box, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
Features
- Large Storage Volume -Filament Dry Box Inner Size: 9.29*6.49*9.13 inch. Comgrow dryer box can store 2 rolls of 1kg spools, compatible with PLA PETG ABS SILK filament. Works perfectly with all standard filament diameters 1.75mm/2.85mm.
- Setting Notes - Set the temperature and duration after turning on the filament dehydrator. The machine will work only when the work state is displayed on the screen. If the work mode is not displayed, the motherboard will automatically shut down after 3 minutes. If you have any unsolvable problems with the COMGROW filament dryer box, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- Filament Dryer and Remove Moisture - Comgrow 3d printer filament dryer box is designed to keep filament dry and remove moisture from kinds of filaments. Internal heating during printing provides a dry storage environment for 3D printer filaments and keeps the filament dry. Avoid entanglement, clogging, poor adhesion, and layer migration caused by the dampness of the printing wire. (Note: Only used for the drying of 3D printer Filament)
- Real-time Monitoring of Temperature and Humidity - Adjustable temperature range 40 ~ 50 C, setting time from 6 hours to 12 hours. A 2-inch LCD screen and touch buttons make it easy to operate, it is more comprehensive and clear of the information display. Press the power button to start, and hold the function button(M) to change the dry time and the temperature setting.
- Great Sealed Filament Dry Box -The outlet structure adopts a silicone cable sheath and Teflon tube, the outlet is smooth and can be covered with a plug when not in use. The upper cover has a snap button structure, and the sealing performance is good.
- How to set the filament - Place the filament into the filament outlet. Please note that the direction is placed counterclockwise so that the pulley at the bottom can feed better.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Dimensions: 9.00 x 9.20 x 6.40 inches | Weight: 3.31 Pounds
See On Amazon #4
ERYONE Silk Tri-Color Coextrusion PLA Filament,3D Printer 1.75mm,+/-0.03mm, Triple Color Filament 1KG(2.2lbs), Silk Red,Blue and Green
Asin: B0B59CH75T | Model: GUS-M4 | PartNumber: GUS-M4
3.【No Warping Multicolor Filament】Perfect Winded Silk Coextruded Color Pla Filament,Tangle-Free Before Unopened, No Stringing And Warping.Universal Compatibility With Most Fdm 3D Printers And 3D Pens..
5.【Exquisite Packaging】 Neatly Lined Up, Reusable Vacuum Sealed Packaging With Built-In Desiccant, So You Have No Worries Before And After Use..
4.【Strong Layer Adhesion】This Silk Pla Filament Has Perfect First Layer Adhesion To Reduce Warpage, Shrinkage, Curl And Print Failure.1.75Mm Tri-Color Silk 3D Printer Pla Filament Is No Bubble, Strong Layer Adhesion Make The Printing Parts Stronger..
2.【High Compatibility】 - 1.75Mm Filament Diameter Automation Control, Accuracy +/- 0.03Mm. Perfectly Compatible With 99% Of The Fdm 3D Printer And 3D Pen..
Features
- 1. Shiny Silk Coextruded PLA - Smooth and shiny finish like real silk, no extra polishing needed. 1/3 of each combination of magicPLA coextruded filaments, it creates a really unique look on your parts! Multicolor silk filaments can output with incredible pearlescent and gorgeous silk surface.
- 2. High Compatibility - 1.75mm filament diameter automation control, accuracy +/- 0.03mm. Perfectly compatible with 99% of the FDM 3D Printer and 3D Pen.
- 3. No Warping Multicolor Filament Perfect winded silk coextruded color pla filament,tangle-free before unopened, no stringing and warping.Universal compatibility with most FDM 3D printers and 3D Pens.
- 4. Strong Layer Adhesion This silk PLA filament has perfect first layer adhesion to reduce warpage, shrinkage, curl and print failure.1.75mm tri-color silk 3D printer PLA Filament is no bubble, strong layer adhesion make the printing parts stronger.
- 5. Exquisite Packaging Neatly lined up, reusable vacuum sealed packaging with built-in desiccant, so you have no worries before and after use.
- See more on Amazon...
Brand: ERYONE | Manufacturer: ERYONE
Dimensions: 2.87 x 8.66 x 8.27 inches | Weight: 2.20 Pounds
See On Amazon #5
Sovol Filament Dryer 2023, SH01 Filament Dehydrator 3D Printer Spool Holder with Upgraded Fan, Dry Box for Keeping Filament Dry, Compatible with 1.75mm, 2.85mm Filament & PLA PETG TPU ABS
Asin: B09686Z5R3 | Model: SV-SH01-1 | PartNumber: SV-SH01-1
【Excellent Power-Off Drying Mode】Silicone & Ptfe Seal Makes It Possible To Store Filaments For A Long Time Without Power And Protects Your Filaments From Moisture And Dirt. You Can Put 4 Bags Of Desiccants (Not Included In The Package) Inside The Dryer Box To Improve Drying Efficience & Quality..
【Heating More Evenly】 The Unique Design Of The Built-In Fan In The Box Is Based On The Principle Of Modynamics Of Air, Makes The Filament Heated More Evenly. Sh01 Makes Drying More Efficient. Any Questions About The Product Please Feel Free To Contact Us. Our Technical Support Team Will Provide Service As Soon As We Can..
【Large Capacity】 Sovol Dryer Box Can Store 2 Filament Rolls With A Width Of Less Than 70 Mm Or 1 Filament Roll With A Width Of Less Than 150 Mm. Please Open The Ptfe Seals On The Top Of The Box During Heating For Moisture Evaporation..
【Real-Time Monitoring Of Temp And Humidity Inside】Displays The Humidity And Temperature In The Dry Box In Real Time. Setting Temperature 40 °, 45 °, 50 ° C And Setting Time From 6 Hours To 12 Hours. If You Use Sh01 In A Room With Room Temperature Under 16℃, The Temperature In The Dryer Box Would Not Come Up To 50℃. But Do Not Worry, This Would Not Decrease Drying Effect..
Features
- Remove Excess Moisture 3D printer filaments are hygroscopic, moisture would cause printing failure. Sovol SH01, a great addition to 3d printer, can remove excess moisture, keep your filament dry and bring you better prints. The surface of prints will be smoother, the layer adhesion increased. No more brittle PLA, PETG, ABS filament.
- Real-time Monitoring of Temp and Humidity inside Displays the humidity and temperature in the dry box in real time. Setting temperature 40 , 45 , 50 C and setting time from 6 hours to 12 hours. If you use SH01 in a room with room temperature under 16 , the temperature in the dryer box would not come up to 50 . But do not worry, this would not decrease drying effect.
- Excellent Power-off Drying Mode Silicone & PTFE seal makes it possible to store filaments for a long time without power and protects your filaments from moisture and dirt. You can put 4 bags of desiccants (not included in the package) inside the dryer box to improve drying efficience & quality.
- Large Capacity Sovol dryer box can store 2 filament rolls with a width of less than 70 mm or 1 filament roll with a width of less than 150 mm. Please open the PTFE seals on the top of the box during heating for Moisture evaporation.
- Heating More Evenly The unique design of the built-in fan in the box is based on the principle of modynamics of air, makes the filament heated more evenly. SH01 makes drying more efficient. Any questions about the product please feel free to contact us. Our technical support team will provide service as soon as we can.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
Dimensions: 9.53 x 9.69 x 6.89 Inches | Weight: 3.66 Pounds
See On Amazon #6
SUNLU Official Elite PETG Filament 1.75mm - 1kg(2.2lbs) Strong PETG 3D Printer Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 320 Meters, PETG Black
Asin: B0CFLW4LCJ | Model: P-SUNLU-PETG-Black | PartNumber: P-SUNLU-PETG-Black | Ean: 0850055848092 | UPC: 850055848092
✅【No Tangle Trouble】The Petg Filament Product Line Is Equipped With Self-Developed Excellent Neat Winding Device, With 100% Neatness Rate, Avoiding Neat And Tangle-Free Lines, Thus Avoiding Possible Jamming And Thread Breakage; The Larger Spool Inner Diameter Design Makes The Feeding Of The Threads Smoother..
✅【Why Choose Official Sunlu Petg】Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". Dimensional Accuracy +/- 0.02Mm. Sunlu Filament Has Wide Compatibility Due To The Small Diameter Error, It's Suitable For Almost All 1.75Mm Fdm 3D Printers..
✅【Petg Filament Recommend Settings】We Recommend Print The Petg Filament At A Nozzle Temperature Of 220-250°C(428-482°F), Bed Temperature Of 75-85°C(167-185°F), Printing Speed Of 50-100Mm/S..
✅【Smooth Print】Patented Non-Clogging Design And Manufacturing Ensures A Smooth And Consistent Printing Experience With These Pla Refills. The Finished Product Has A Fine Surface And Exquisite Details. Toughness And Durability Of The Printed Model..
Features
- High-Quality PETG Filament 1.75mm It has the advantages of both PLA and ABS filaments. Eco-friendly, odorless, and non-toxic. No cracking and warping. With good toughness, the printed model is firm and sturdy. The filament can bend repeatedly with high elongation at break.
- Smooth Print Patented non-clogging design and manufacturing ensures a smooth and consistent printing experience with these PLA refills. The finished product has a fine surface and exquisite details. Toughness and durability of the printed model.
- No Tangle Trouble The PETG filament product line is equipped with self-developed excellent neat winding device, with 100% neatness rate, avoiding neat and tangle-free lines, thus avoiding possible jamming and thread breakage; the larger spool inner diameter design makes the feeding of the threads smoother.
- PETG Filament Recommend Settings We recommend print the PETG filament at a nozzle temperature of 220-250 C(428-482 F), bed temperature of 75-85 C(167-185 F), printing speed of 50-100mm/s.
- Why Choose Official SUNLU PETG Spool Diameter: 8.00, Spool Width: 2.50, Spool Hub Hole Diameter: 2.20. Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers.
- See more on Amazon...
First Available: 10/20/2023
Brand: YOOPAI | Manufacturer: SUNLU
Weight: 2.20 pounds
Warranty: 180
See On Amazon #7
AMOLEN PLA 3D Printing Filament, PLA Filament 1.75mm Silk Shiny Filament Red Gold Filament, 3D Printer Gradient Pla Filament 1KG/2.2lb Compatible with 3D Printer and 3D Pen
Asin: B08QN2PCG1
Premium Quality - High Quality Silk 3D Printer Pla Filament With High Purity, No Bubbles, No Jamming, No Warping, Melt Well, Feed Smoothly, Outstanding 3D Printing Appearance. 100% No Tangle, Machine Auto Wind, Fixed Hole Steady.
Hassle Free - Amolen Is Focus On Innovative And Better Quality Pla Filament. Defective Filament Can Be Reissued Or Refunded Fully. We Provide Professional 3D Printing Technical Guidance And Good 24/7 Customer Service, Note: After Use, Please Insert The Cable Into The Fixed Filament Hole And Store It Properly..
Vacuum & Reusable Bag - Vacuum Packaging With Desiccant To Keep The Dual Color Silk Pla Filament Dry And Keep Out Dust, Reusable Bag With Sealing Strip, Silk Pla Filament Can Be Put Back Into Bag After Used. Perfect Storage Condition.
Strong Compatibility - Perfectly Compatible With 99% Fdm 3D Printer & 3D Pen. Comgrow Creality Ender,Anycubic,Creality 3D,Sunlu,Eryone,Mynt3d,3Doodler,Ams Compatible, 1.75Mm Gradient Silk Pla Filament Consistent Diameter,Dimensional Accuracy +/-0.03Mm.
Features
- SILK PLA SHINY FILAMENT - AMOLEN gradient silk pla filament combine silk gold and shiny red, stunning multicolor filament, print finished will give you an amazing 3D printing object. Multicolor PLA Filament normally around 10-15 meters change color and is excellent for the larger prints to show all colors.
- STRONG COMPATIBILITY - Perfectly compatible with 99% FDM 3D Printer & 3D Pen. Comgrow Creality Ender,ANYCUBIC,Creality 3D,SUNLU,ERYONE,MYNT3D,3Doodler,AMS compatible, 1.75mm gradient silk pla filament consistent diameter,dimensional accuracy +/-0.03mm
- PREMIUM QUALITY - High quality silk 3d printer pla filament with high purity, no bubbles, no jamming, no warping, melt well, feed smoothly, outstanding 3D printing appearance. 100% no tangle, machine auto wind, fixed hole steady
- VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep the dual color silk pla filament dry and keep out dust, reusable bag with sealing strip, silk pla filament can be put back into bag after used. Perfect storage condition
- HASSLE FREE - AMOLEN is focus on innovative and better quality PLA filament. Defective filament can be reissued or refunded fully. We provide professional 3D printing technical guidance and good 24/7 customer service, Note: After use, please insert the cable into the fixed filament hole and store it properly.
- See more on Amazon...
Brand: AMOLEN | Manufacturer: AMOLEN
Weight: 2.20 pounds
See On Amazon #8
GIANTARM 3D Printer PLA Filament, Shiny Silk Rose Pink Magenta Toughness Enhanced Filament with 1.75mm Dimensional Accuracy +/-0.03mm, 1080 Feet per Roll, Vacuum Packaging, for Most 3D FDM Printer
Asin: B09JW8X1MY | Model: GIANTARM-1217 | PartNumber: GIANTARM-1217
【1.75Mm Pla Filament】--Giantarm Pla Burlywood Filaments To Be Strict Tolerances, 1.75Mm Diameter, Dimensional Accuracy + / - 0.03 Mm Without Any Exaggeration, 1 Kg Spool (2.2Lbs), Consistent Colors Without Traces Of Other Color..
【Professional Packaging】--Vacuum Packaging With Desiccant To Keep The 3D Printer Filament Dry And Keep Out Dust And Foreign Particles. Weight: 1Kg (2.2Ibs) Spool, Width: 2.5", Spool Diameter: 7.8", Spool Hub Hole Diameter: 2.30". Please Remember To Put It Back Into The Re-Sealable Bag Timely After Using To Maintain Excellent..
【Clog-Free, Bubble-Free & Easy-To-Use】---Complete Drying For 24 Hours Before Packaging And Vacuum Sealed With Desiccants In Nylon Re Bag, Enable Much Smoother And More Stable Printing. Recommended Pla Filament Extrusion/Nozzle Temperature 190℃ -215℃, Bed 40℃-60℃..
【Less-Tangle & Wide Compatibility】--Full Mechanical Winding And Strict Manual Examination, Which Guarantee The Giantarm Pla Filaments Tidy And Easy To Be Fed. Works Perfectly With Most Fdm 3D Printers And 3D Printer Pen On The Market..
Features
- Shiny Silk PLA Smooth and shiny finish like real silk, no extra polishing needed, printing at a high detail results in a beautiful finish. GIANTARM high quality silk PLA filament brings arts & crafts and 3D projects smooth shiny silk-like surface which definitely gives an eye-popping result!
- Less-tangle & Wide Compatibility --Full mechanical winding and strict manual examination, which guarantee the GIANTARM PLA filaments tidy and easy to be fed. Works perfectly with most FDM 3D Printers and 3D Printer Pen on the market.
- 1.75mm PLA Filament --GIANTARM PLA Burlywood filaments to be strict tolerances, 1.75mm Diameter, dimensional accuracy + / - 0.03 mm without any exaggeration, 1 kg spool (2.2lbs), consistent colors without traces of other color.
- Clog-Free, Bubble-Free & Easy-to-use ---Complete drying for 24 hours before packaging and vacuum sealed with desiccants in nylon re bag, enable much smoother and more stable printing. Recommended PLA Filament Extrusion/Nozzle Temperature 190 -215 , bed 40 -60 .
- Professional Packaging --Vacuum packaging with desiccant to keep the 3D Printer filament dry and keep out dust and foreign particles. Weight: 1KG (2.2Ibs) Spool, Width: 2.5, Spool Diameter: 7.8, Spool Hub Hole Diameter: 2.30. please remember to put it back into the re-sealable bag timely after using to maintain excellent.
- See more on Amazon...
Brand: GIANTARM | Manufacturer: GIANTARM
Weight: 2.20 pounds
Warranty: 1 year
See On Amazon #9
Kingroon PLA 3D Printer Filament, Triple Color Silk PLA Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool(2.2lbs), 1.75 mm, Red Blue Green
Asin: B0BQ39KF4X | Model: yyds1 | PartNumber: yyds1 | Ean: 0793127955499 | UPC: 793127955499
Wide Compatibility: Kingroon Silk Pla Filament Works Perfectly With All Common 1.75Mm Fdm 3D Printers, Thanks To The High Quality Standards In Terms Of Manufacturing Accuracy..
Excellent Service: Kingroon Is A Customer-Centric Company, We Have Been Committed To Providing Customers With Good Service, If You Have Any Questions, Please Do Not Hesitate To Contact Us At Any Time, We Will Try Our Best To Solve Your Problems..
Toughness Enhanced Silk Pla Filaments: Kingroon Pla Filaments Have The Advantages Of Incredible Ease Of Printing Optimized Printing Quality, High Purity With Low Shrinkage And Superb Layer Bonding, Meeting Your Demands For Printing Projects Of Functional Parts With Higher Toughness..
Smooth Surface, Delicate And Soft: Silk Pla Filament Is Made Of Polymer Composite Material, High Toughness, High Gloss, With Silk Texture..
Features
- TRI Color Appearance: Different colors at different angles,you can see red,green and blue ,Three colors are integrated in PLA filament, and multi-color printing can realize three colors of a model, so that printing is no longer boring.
- Smooth Surface, Delicate and Soft: Silk PLA filament is made of polymer composite material, high toughness, high gloss, with silk texture.
- Wide Compatibility: Kingroon Silk PLA Filament Works perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy.
- Toughness Enhanced Silk PLA Filaments: Kingroon PLA filaments have the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness.
- Excellent service: Kingroon is a customer-centric company, we have been committed to providing customers with good service, if you have any questions, please do not hesitate to contact us at any time, we will try our best to solve your problems.
- See more on Amazon...
Brand: Kingroon | Manufacturer: Kingron
Weight: 2.20 Pounds
Warranty: 1 Year
See On Amazon #10
SUNLU Official Filament Dryer S1 Plus, Built-in Circulation Fan, Filament Dryer Box Storage Box for 3D Printer Filament 1.75 2.85 3.00, S1 Plus White
Asin: B08C9RZPMN | Model: SUNLU Filament Dryer S1 Plus | PartNumber: SUNLU Filament Dryer S1 Plus | Ean: 0782950697805 | UPC: 782950697805
【Personalized Drying Time Setting】 The Default Continuous Drying Time Of The Drying Box Is 6 Hours, And You Can Also Manually Set The Drying Time. The Time Setting Range Is 0~24 Hours. Commonly Used 3D Filament On The Market Under Normal Circumstances Only Need 3-6 Hours Of Drying To Achieve A Good Printing Experience And Printing Effect..
【User-Friendly Design&1 Year Guaranteed After-Sales Service】 A: The Design Of Two Rollers Inside The Box Allows You To Print While Drying; B: 2 Inch Large Screen Lcd Monitor, Can Display Temperature And Time Clearly And Brightly; C: Ultra Quiet Design, Less Than 10Db While Operating, No Disturbing Of Your Life And Work; D: Exquisite Packaging Design- Best Gift: Come On To Buy One To Present To Your Friends Who Love 3D Printing.
【Importance Of Filament Dryer】Any Material Of Filaments Will Absorb Moisture From The Air, Filament Being Old Or In High Humidity Place May Absorb A Lot. Damp Filament Will Cause Many Printing Issues, Filament Dryer Can Remove Moisture From The Damp Filament..
【Compatible With 99% Of 3D Filament Spools】A: Maximum Capacity Of Sunlu Dry Box Is Φ210*85(H)Mm. B: Compatible With All The Mainstream 3D Filament Brands Sunlu, Geeetech, Eryone, Esun, Amazon Basic Etc.; C: Works Perfectly With All Standard Filament Diameters 1.75Mm/2.85Mm/3.00Mm..
【Personalized Temperature Setting】The User Can Adjust The Temperature Of The Drying Box According To Different 3D Filament Type, Ambient Temperature, Humidity And Other Factors. Adjustable Temperature Range 35℃~55℃. Suitable For More Than 20 Kinds Of 3D Printing Filament Commonly Used In The Market.
Features
- Say Goodbye to Poor 3D Printing by Wet Filament Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. SUNLU FDM 3D Filament Dryer Enclosure can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments.
- Personalized Temperature Setting The user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors. Adjustable temperature range 35 ~55 . Suitable for more than 20 kinds of 3d printing filament commonly used in the market
- Personalized Drying Time Setting The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time. The time setting range is 0~24 hours. Commonly used 3D filament on the market under normal circumstances only need 3-6 hours of drying to achieve a good printing experience and printing effect.
- Compatible with 99% of 3D Filament Spools A: Maximum capacity of SUNLU dry box is 210*85(H)mm. B: Compatible with all the mainstream 3D filament brands SUNLU, GEEETECH, ERYONE, ESUN, AMAZON BASIC etc.; C: Works perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm.
- User-friendly Design&1 Year Guaranteed After-Sales Service A: The design of two rollers inside the box allows you to print while drying; B: 2 inch large screen LCD monitor, can display temperature and time clearly and brightly; C: Ultra quiet design, less than 10db while operating, no disturbing of your life and work; D: Exquisite packaging design- best gift: Come on to buy one to present to your friends who love 3D printing
- Importance of Filament Dryer Any material of filaments will absorb moisture from the air, filament being old or in high humidity place may absorb a lot. Damp filament will cause many printing issues, filament dryer can remove moisture from the damp filament.
- See more on Amazon...
Brand: SUNLU | Manufacturer: SUNLU
Weight: 2.69 Pounds
See On Amazon #11
YOUSU 3D Printer Filament PLA Filament 1.75mm Multicolor Mixed Filament 250g*4 Sample Pack.
Asin: B0C9J9DCDP | Ean: 0710917169768 | UPC: 710917169768
【Good Layer Adhesion & Rigidity】 - No Warping, No Jamming, No Blobs Or Layer Delamination Issues.Yousu Glittery 1.75 Pla Filament Is A Worry-Free Product That Has Great Bed Adhesion, Very Consistent Color, And Dimensional Accuracy. It Is More Rigid Than Almost All The Competitive 3D Printing Filaments Such As Pla+ Filament 1.75Mm..
【Printing Settings】 - Nozzle: 180~220˚C, Bed: 40~60 ˚C, Speed: 40~100 Mm/S. Applicable To Almost All Fdm 3D Printers ..
【Lifetime Warranty】 - We Offer A Full Refund If The Product Is Not Performing As Expected. Let Us Help You Get Your Perfect Beautiful Prints And Contact Us Via Amazon Anytime You Need.
【No Tangling And Clogging】Completely Mechanical Winding, Meticulous Manual Inspection, Precise Winding And No Overlapping Or Tangling. Without Clogging The Nozzle Or Extruder, Feed Continuously And Smoothly During Printing. More Accurately And Smoothly Printing Can Be Achieved..
【Cost-Effective】This Mulicolor Sample Pack Filament Provide Different Color Choice With One Packaging..
Features
- 4 Spools Multicolor PLA Filament Bundle : This Bundle Pack Included Giltter Galaxy Black color,Chameleon Blue/Purple Color, Glow in the Dark Starry Sky,Glitter Gold galaxy black color, Each Spool Weight is 0.25kg, Total is 1Kg, Very Suitable to Print Multi-Colored 3d Print Objects, It's Great Sample and Gift Pack for 3D Printing,Use code"DYNTXYQ2 "to get extra discount.
- Cost-effective This Mulicolor sample pack filament Provide different color choice with one packaging.
- Good Layer Adhesion & Rigidity - No warping, no jamming, no blobs or layer delamination issues.Yousu glittery 1.75 PLA filament is a worry-free product that has great bed adhesion, very consistent color, and dimensional accuracy. It is more rigid than almost all the competitive 3D printing filaments such as PLA+ filament 1.75mm.
- No Tangling and Clogging Completely mechanical winding, meticulous manual inspection, precise winding and no overlapping or tangling. Without clogging the nozzle or extruder, feed continuously and smoothly during printing. More accurately and smoothly printing can be achieved.
- Printing Settings - Nozzle: 180~220 C, Bed: 40~60 C, Speed: 40~100 mm/s. Applicable to almost all FDM 3D printers .
- Lifetime Warranty - We offer a full refund if the product is not performing as expected. Let us help you get your perfect beautiful prints and contact us via Amazon anytime you need
- See more on Amazon...
Brand: Yousu | Manufacturer: YOUSU
Dimensions: 2.95 x 9.84 x 8.66 inches | Weight: 2.20 pounds
See On Amazon #12
Stronghero3D PETG 3D Printer Filament 1.75mm,Multicolor,Chrome Chameleon,1kg(2.2lbs) Accuracy +/-0.05mm for ender3 Cr10 Sovol
Asin: B09N8QV1ZD | Model: PETG_Chrome_Chameleon | PartNumber: PETG_Chrome_Chameleon | Ean: 0743450939321 | UPC: 743450939321
Please Closely Observe Whether The First Layer Of Printing Is Well Adhered. If There Is Any Abnormality, Please Restart Printing. When Printing The First Few Layers Of The Model, The Cooling Fan Must Be Turned Off..
100% Satisfy Warranty: Within 24 Hours Reply,100% Satisfaction Guarantee, If You're Not Completely Satisfied For Any Reason, Contact Us And We'll Help You.
Better Flow ,Premium 1.75Mm Petg Filament. It Has Consistent Diameter & Roundness, Less Stringing And Warping, Strong Layer Adhesion. No Impurities, No Clogged, Vacuum Package , Net Weight 1Kg/Spool.
Controlling The Moisture Content Of The Petg Material Is Critical For 3D Printing Because The Petg Molecular Structure Automatically Tends To Dehydrate Even When The Vacuum Package Is Not Opened. Drying Temperature 70, Lack Of Equipment Can Be Exposed To The Sun Exposure For 4 Hours..
Printing Tips: Recommend Heat Bed 70°C, Nozzle: 220-230°C, Speed 25-37Mm/S,Rectration Length 3-5Mm,Rectration Speed 40-50Mm/S.
Petg Absorbs Moisture More Easily Than Pla. Please Use It Within 24 Hours Of The Day After Opening The Package. Otherwise, Please Dry It At 70 Degrees For More Than 3 Hours..
Features
- Strong metal texture, with silky smooth surface and glitter starly sparkling
- PETG absorbs moisture more easily than PLA. Please use it within 24 hours of the day after opening the package. Otherwise, please dry it at 70 degrees for more than 3 hours.
- Please closely observe whether the first layer of printing is well adhered. If there is any abnormality, please restart printing. When printing the first few layers of the model, the cooling fan must be turned off.
- Printing tips: recommend heat bed 70 C, nozzle: 220-230 C, speed 25-37mm/s,rectration length 3-5mm,rectration speed 40-50mm/s
- Better flow ,premium 1.75mm PETG filament. It has consistent diameter & roundness, less stringing and warping, strong layer adhesion. No impurities, no clogged, vacuum package , net weight 1KG/Spool
- Controlling the moisture content of the PETG material is critical for 3D printing because the PETG molecular structure automatically tends to dehydrate even when the vacuum package is not opened. Drying temperature 70, lack of equipment can be exposed to the sun exposure for 4 hours.
- 100% satisfy warranty: within 24 hours reply,100% satisfaction guarantee, if you're not completely satisfied for any reason, contact us and we'll help you
- See more on Amazon...
Brand: Stronghero3D | Manufacturer: Stronghero3D
Dimensions: 7.87 x 7.87 x 2.36 inches | Weight: 2.20 Pounds
See On Amazon #13
eSUN Flexible TPE Filament 1.75mm, TPE-83A 3D Printer Filament, 1KG Spool 3D Printing Filament for 3D Printers, Black
Asin: B08RRWZRPQ | Model: eLastic175B1KG-US | PartNumber: eLastic175B1KG-US
【Tangle Free & No Plugging】Full 1Kg 3D Printer Filament Reel, Perfect Roundness And Very Tight Diameter Tolerance, Does Not Overlap Or Tangle, Less Stringing, Strong Layer Adhesion. Melt Well, Feed Smoothly And Constantly Without Clogging The Nozzle Or Extruder..
【Vacuumed Sealed Packaging】1Kg Spool Flexible Tpe-83A Filament Comes In A Sealed Vacuum Bag With A Desiccant Bag, Easily Keep Your 3D Printer Filaments At An Optimal Storage Condition And Free From Dust Or Dirt Before Opening The Vacuumed Sealed Packaging..
Any Problem Of Product, Please Feel Free To Contact Us..
【Wide Application】Flexible Tpe Filament Is Durable And Stretchable Material Which Prints Strong Parts That Are Also Flexible, It Resumes Its Initial Shape After Being Stretched. Great For A Variety Of Projects, Such As Shoe Insoles, Watch Bands, Phone Cases, Drone Parts And More!.
【Stable Dimensional Tolerance】Minimum Tolerance And Low Warping To Ensure Consistent Feeding And Stable Prints, No Clogging, No Bubbles, Extremely High Successful Rate, Resulting In An Outstanding Surface Finish And Are Highly Precise..
Features
- Flexible TPE 83A Hardness Shore 83A. Strong Flexibility. High Resilience. High Strength. High Mechanical Strength. Wear Resistance. Tear Resistance. Inflection Resistance. Water-, Cold-, Heat-, and UV Resistance. Good Aging Resistance.
- Stable Dimensional Tolerance Minimum tolerance and low warping to ensure consistent feeding and stable prints, no clogging, no bubbles, extremely high successful rate, resulting in an outstanding surface finish and are highly precise.
- Tangle Free & No Plugging Full 1KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, does not overlap or tangle, less stringing, strong layer adhesion. Melt well, feed smoothly and constantly without clogging the nozzle or extruder.
- Wide Application Flexible TPE filament is durable and stretchable material which prints strong parts that are also flexible, it resumes its initial shape after being stretched. Great for a variety of projects, such as shoe insoles, watch bands, phone cases, drone parts and more!
- Vacuumed Sealed Packaging 1KG Spool Flexible TPE-83A Filament comes in a sealed vacuum bag with a desiccant bag, easily keep your 3D printer filaments at an optimal storage condition and free from dust or dirt before opening the vacuumed sealed packaging.
- Any problem of product, please feel free to contact us.
- See more on Amazon...
Brand: eSUN | Manufacturer: eSUN
Weight: 2.20 pounds
See On Amazon #14
Comgrow Filament Dryer, Upgraded Filament Dry Box, Large-Capacity 3D Filament Dehydrator for 2KG Filament, Compatible with 1.75mm, 2.85mm Filament and PLA PETG TPU ABS Material
Asin: B09BBDG5MK | Model: AK36WG-1200400J | PartNumber: AK36WG-1200400J
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #15
CREALITY PETG Filament 1.75mm 3D Printer Filament, 1kg (2.2lb) Neatly Wound Spool, Dimensional Accuracy 0.03mm, 2024 Latest Batch, Fit for Ender, Bambu Lab, Anycubic,ELEGOO FDM Printers, Red
Asin: B0CRRHXKQC | Model: Creality Red PETG | PartNumber: Creality Red PETG | Ean: 0850060423062 | UPC: 850060423062
【Toughness-Enhanced Petg】 Creality Petg Choose Durable And Strong Material That Delivers Excellent Clarity, Light Transmission, And A Glossy Finish. It Is Recommended To Use A Printing Temperature Of 220-250°C And A Base Plate Temperature Of 70-80°C For Better Printing Results..
【High Precision】Creality Petg Filament Boasts A Diameter Of 1.75Mm, Ensuring Utmost Accuracy With A Tolerance Of Only +/- 0.02Mm. With Strict Quality Control And Impeccable Dimensional Precision, Ender Petg Filament Guarantees A Smooth And Steady Feeding During Printing..
【No Clogging & No Bubbles】Creality Filaments Are Thoroughly Dried And Carefully Vacuum Sealed To Protect Them From Moisture And Dust, Which Ensures That There Will Be No Issues With Clogging Or Bubbling During Printing..
【Tangle-Free, Neatly Spooled】Creality Guarantees That 99% Petg Filament Is Tightly And Neatly Spooled Using Fully Mechanical Winding, Which Effectively Reduces The Occurrence Of Tangles, Filament Breakage And Line Snapping..
Features
- High Performance Creality PETG filament combines the advantages of PLA and ABS. Eco-friendly, odorless and non-toxic.This PETG Filament is feature in good toughness to avoid cracking and warping, enbale excellent 3D printing.
- Tangle-Free, Neatly Spooled Creality guarantees that 99% PETG filament is tightly and neatly spooled using fully mechanical winding, which effectively reduces the occurrence of tangles, filament breakage and line snapping.
- Toughness-Enhanced PETG Creality PETG choose durable and strong material that delivers excellent clarity, light transmission, and a glossy finish. It is recommended to use a printing temperature of 220-250 C and a base plate temperature of 70-80 C for better printing results.
- No Clogging & No Bubbles Creality filaments are thoroughly dried and carefully vacuum sealed to protect them from moisture and dust, which ensures that there will be no issues with clogging or bubbling during printing.
- High Precision Creality PETG filament boasts a diameter of 1.75mm, ensuring utmost accuracy with a tolerance of only +/- 0.02mm. With strict quality control and impeccable dimensional precision, Ender PETG filament guarantees a smooth and steady feeding during printing.
- See more on Amazon...
First Available: 02/27/2024
Brand: Creality | Manufacturer: Creality
Dimensions: 7.68 x 7.68 x 2.36 inches | Weight: 2.20 Pounds
Warranty: One Month Free Return/Change
See On Amazon #16
OVV3D Silk PLA Filament, 3D Printer Filament Tri-Colors Coextrusion PLA Filament 1.75mm, Rainbow PLA Filament with Silk PLA Red-Blue-Green, 3D Printing Filament +/-0.02mm, 1kg/2.2lbs
Asin: B0B3JV15XH | Model: B01BEGNRD | PartNumber: B01BEGNRD
【Easy To Print】The Diameter Tolerance Of This 1.75 Pla Filament Is +/- 0.02Mm. More Stable Diameter Tolerance Of 3D Printer Filament Would Give You Smoother 3D Printing. High Toughness Pla Filament 1.75Mm Cause You Have Room For 3D Printing Imagination..
【Eco Packaging】Instead Of Plastic Spools, We Use Paper Spool And Paper Box To Package Pla Filament. Protecting The Environment Is The Responsibility Of Each Of Us. The Pla Filament Is Vacuum Packed With High Quality Desiccant To Keep Dry..
【Upgrade Pla Raw Material】The Raw Material Comes From Europe, And It Has Been Developed And Modulated To Show A Charming Gloss On The Pla. No Jamming, No Bubble, No Tangle, And No Layer Line, Just Silk Color Changing Pla Filament..
【Silk Pla Filament】We Specialize In Silk Pla Filament So That The Surface Of This Tri-Color 3D Printing Filament Is Very Smooth And Shiny. What You 3D Printing Out Will Be As Glossy As In The Pictures, No Exaggeration..
Features
- Tri-Colors Coextruded Filament Different from normal color change rainbow PLA filament, every inch of this magic 3d filament is made of three colors-Red, Blue, and Green. Therefore, you will easily get all colors, even for very small prints. Different prints will present different effects. Enjoy your 3d printing creations.
- Silk PLA Filament We specialize in silk PLA filament so that the surface of this tri-color 3d printing filament is very smooth and shiny. What you 3d printing out will be as glossy as in the pictures, no exaggeration.
- Easy to Print The diameter tolerance of this 1.75 PLA filament is +/- 0.02mm. More stable diameter tolerance of 3D printer filament would give you smoother 3D printing. High toughness PLA filament 1.75mm cause you have room for 3D printing imagination.
- Upgrade PLA Raw Material The raw material comes from Europe, and it has been developed and modulated to show a charming gloss on the PLA. No jamming, no bubble, no tangle, and no layer line, just silk color changing PLA filament.
- ECO Packaging Instead of plastic spools, we use paper spool and paper box to package PLA filament. Protecting the environment is the responsibility of each of us. The PLA filament is vacuum packed with high quality desiccant to keep dry.
- See more on Amazon...
Brand: OVVNYXE | Manufacturer: OVV3D
Weight: 2.20 pounds
See On Amazon #17
Polymaker Matte PLA Filament 1.75mm Lavender Purple, 1.75 PLA 3D Printer Filament 1kg - PolyTerra 1.75 PLA Filament Matte Light Purple 3D Printing Filament
Asin: B08QMR7HXP | Model: 70852 | PartNumber: 70852 | Ean: 6938936708520
🛠️ 【Advanced Properties】 - Polyterra Pla Features A Ductility Similar To Pla Plus (Less Brittle).
⚠️ 【Note】 - Please Use Pvp (Polyvinylpyrrolidine) Glue On The Print Bed If You Have Bed Adhesion Issue. It's Also Recommend Using Hardened Nozzles And Gear To Print Matte Pla.
♻️ 【Cardboard Spool】 - Polyterra Pla Comes In A Fully Recycled Cardboard Packaging And Has Been Liked By Hundreds Of Thousands Of Polymaker Customers.
⚙️ 【Printing Settings】 - Nozzle: 210˚C, Bed: 50˚C, Speed: 60 Mm/S. Selected Diameter: Polyterra Pla Filament 1.75Mm Lavender Purple ( Pla Filament Purple ).
✨ 【Easy Support Removal】 - Polyterra Pla 3D Printer Filament Purple Is Designed To Support Itself And Breakaway Easily, Saving Your Time And Hassle During Support Removal.
🧵 【Tangle Free & Moisture Free】 - Polyterra Pla Is Carefully Winded To Avoid Any Tangling Issues, Dried And Vacuum Sealed In A Resealable Ziplock Bag With Desiccant. Please Pass The Filament Through The Fixed Hole To Avoid Tangles After Use.
Features
- Matte Finish - PolyTerra PLA is a 3D printer PLA featuring an incredible matte surface finish which helps hide the layers of your print. PolyTerra PLA comes in more than 20 different colors. Selected color: Light Purple PLA filament 1.75mm ( PLA Purple Filament )
- Tangle Free & Moisture Free - PolyTerra PLA is carefully winded to avoid any tangling issues, dried and vacuum sealed in a resealable ziplock bag with desiccant. Please pass the filament through the fixed hole to avoid tangles after use
- Advanced Properties - PolyTerra PLA features a ductility similar to PLA plus (less brittle)
- Easy Support Removal - PolyTerra PLA 3D printer filament Purple is designed to support itself and breakaway easily, saving your time and hassle during support removal
- Cardboard Spool - PolyTerra PLA comes in a fully recycled cardboard packaging and has been liked by hundreds of thousands of Polymaker customers
- Printing Settings - Nozzle: 210 C, Bed: 50 C, Speed: 60 mm/s. Selected diameter: PolyTerra PLA filament 1.75mm Lavender Purple ( PLA filament Purple )
- NOTE - Please use PVP (PolyVinylPyrrolidine) glue on the print bed if you have bed adhesion issue. It's also recommend using hardened nozzles and gear to print matte PLA
- See more on Amazon...
Brand: Polymaker | Manufacturer: Polymaker
Dimensions: 7.09 x 3.15 x 8.27 Inches | Weight: 2.20 pounds
See On Amazon #18
HATCHBOX PETG 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Red
Asin: B014VM98DC | Model: 3D PETG-1KG1.75-RED | PartNumber: 3D PETG-1KG1.75-RED | Ean: 0849344042457 | UPC: 849344042457
Beginner & Expert Friendly: Hatchbox 3D Filaments Are Made With Quality And Consistency In Mind, Making It Easy For Novice Users To Get Started With Basic Settings. Seasoned Printers Can Push Their Designs To The Limit Without Worrying About Purity, Tolerance Or Printing Issues..
Why Hatchbox? We’Re Proud To Be Known In The 3D Printing Community For Producing The Highest Quality Pla On The Market, With The Largest Selection Of Filaments And Colors At An Unbeatable Price. From Art And Design, To Prototypes And Models, Hatchbox Is Trusted To Deliver The Best In 3D Printing Technology..
Durable & Easy To Use: Strong, Durable And Tangle-Free, Hatchbox Petg 3D Printer Filament Offers Minimal Warping And Bonds Easily To The Heat Bed. Enjoy Effortless Printing With Unmatched Clog And Bubble-Free Prints. Our Petg Is Vacuum Sealed With Desiccant To Prevent Moisture Absorption, Allowing For High-Detail Resolution..
Flexible & Impact Resistant: This Innovative Material Has Been Gaining Popularity Since Its Launch! Petg Combines The Printability Of Pla With The Strength Of Abs! Odorless, Lightweight, Heat Tolerant, Flexible, And Highly Impact Resistant, It’S Available In A Variety Of Colors And Even A Transparent Form. Easily Print Shatterproof Designs And Prototypes..
Features
- FILAMENT SPECS: SIZE: 1 kg (approximately 2.20 lbs) Spool, 1.75 mm Filament Diameter (Dimensional Accuracy +/- 0.03 mm), TEMPERATURE: Recommended Extrusion/Nozzle Temp 230 C - 260 C (446 F - 500 F)
- FLEXIBLE & IMPACT RESISTANT: This innovative material has been gaining popularity since its launch! PETG combines the printability of PLA with the strength of ABS! Odorless, lightweight, heat tolerant, flexible, and highly impact resistant, it s available in a variety of colors and even a transparent form. Easily print shatterproof designs and prototypes.
- BEGINNER & EXPERT FRIENDLY: Hatchbox 3D Filaments are made with quality and consistency in mind, making it easy for novice users to get started with basic settings. Seasoned printers can push their designs to the limit without worrying about purity, tolerance or printing issues.
- DURABLE & EASY TO USE: Strong, durable and tangle-free, Hatchbox PETG 3d printer filament offers minimal warping and bonds easily to the heat bed. Enjoy effortless printing with unmatched clog and bubble-free prints. Our PETG is vacuum sealed with desiccant to prevent moisture absorption, allowing for high-detail resolution.
- WHY HATCHBOX? We re proud to be known in the 3D printing community for producing the highest quality PLA on the market, with the largest selection of filaments and colors at an unbeatable price. From art and design, to prototypes and models, Hatchbox is trusted to deliver the best in 3D printing technology.
- See more on Amazon...
Brand: HATCHBOX | Manufacturer: HATCHBOX
Dimensions: 3.15 x 8.27 x 9.45 inches | Weight: 2.20 pounds
See On Amazon #19
SUNLU 4KG 3D Printer Filament Bundle PLA Matte 1.75mm, Neatly Wound Filament with Matte Finish, Print with 99% FDM 3D Printers, 1kg Spool (2.2lbs), 4 Packs, Black+Black+Black+Black
Asin: B0CJ2RTRNC | Model: SUNLU PLA Filament matte | PartNumber: SUNLU PLA Filament matte
🎄【Stable Dimensional Tolerance】- Sunlu Pla Matte Filament Dimensional Accuracy +/- 0.03Mm. Minimum Tolerance And Low Warping To Ensure Consistent Feeding And Stable Prints, Good Layer Bonding, Less Stringing, Easy Handling, Resulting In An Outstanding Surface Finish And Are Highly Precise..
🎄【No Odor & No Bubbles】- Sunlu 3D Printer Filament Are Mainly Made Of Corn Starch, Which Is Odorless When Printing. Vacuum Sealed, There Is Also A Desiccant Package, Vacuum Packaging To Avoid Dust And Keep The Filament Dry..
🎅【Strong Compatibility】- Sunlu 3D Filament Is Not Only Applicable To All Sunlu 3D Printing Products: Fdm 3D Printer, 3D Printer Accessories, Filament Dyer, But Also Applicable To Almost All Fdm 3D Printers Of Other Brands. For Example: Ender 3/Ender 3V2, Etc..
🎅【Recommend Settings & Easy To Operate】- We Recommend Printing The Pla Matte Filament At Nozzle Temperature Of 200-230°C, Bed Temperature Of 50-65°C, And Printing Speed Of 50-100Mm/S. The Length Of The Filament Can Reach About 330 Meters. The Operation Is Very Simple And Suitable For Novices..
🎅【Pla Features & Matte Color】- Sunlu's Newly Upgraded Matte Pla Filament Colors Retain The Original Sunlu Pla Advantages: Easy Printing, No Clogging, While Adding More Color Options. Matte Pla Can Print Prints With Non-Glossy Colors And Frosted Textures, Suitable For More Premium And Mysterious 3D Models..
Features
- SUNLU 100% Wound Neatly 3D Filament - SUNLU R&D team has mastered advanced technology and produced 100% Neatly Wound 3D Printer Filament, which is impossible for other brands. No knot, no winding, improve printing efficiency.
- PLA Features & Matte Color - SUNLU's newly upgraded Matte PLA Filament colors retain the original SUNLU PLA advantages: Easy Printing, No Clogging, while adding more color options. Matte PLA can print prints with non-glossy colors and frosted textures, suitable for more premium and mysterious 3D models.
- Stable Dimensional Tolerance - SUNLU PLA MATTE Filament Dimensional Accuracy +/- 0.03mm. Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing, easy handling, resulting in an outstanding surface finish and are highly precise.
- Recommend Settings & Easy to operate - We recommend printing the PLA Matte Filament at nozzle temperature of 200-230 C, bed temperature of 50-65 C, and printing speed of 50-100mm/s. The length of the filament can reach about 330 Meters. The operation is very simple and suitable for novices.
- No Odor & No Bubbles - SUNLU 3D Printer Filament are mainly made of corn starch, which is odorless when printing. Vacuum sealed, there is also a desiccant package, vacuum packaging to avoid dust and keep the filament dry.
- Strong compatibility - SUNLU 3D Filament is not only applicable to all SUNLU 3D printing products: FDM 3D Printer, 3D Printer Accessories, Filament Dyer, but also applicable to almost all FDM 3D printers of other brands. For example: Ender 3/Ender 3V2, etc.
- See more on Amazon...
Brand: SUNLU | Manufacturer: SUNLU
Weight: 8.82 Pounds
See On Amazon #20
ELEGOO Rapid PETG Filament 1.75mm Red 1KG, High Speed 30-600mm/s 3D Printer Filament Dimensional Accuracy +/- 0.02 mm, 1kg Cardboard Spool(2.2lbs) Fits for Most FDM 3D Printers
Asin: B0CMCBDY1V | Model: CA-EL-3D-PHE6 | PartNumber: CA-EL-3D-PHE6
【Good Toughness & Easy To Use】Petg Combines The Best Features Of Abs And Pla, It’S As Easy To Print As Pla, And Has Similar Strength Compared To Abs. Durable, Flexible, Highly Impact Resistant And Odorless, Ideal For Printing Daily Necessities.
【Fit For High Speed Printer】Fit For Both Regular Printers And High Speed Printers, Perfectly For Most 1.75Mm Printers Such As Neptune 4, Neptune 4 Pro/Plus/Max, K1 Series, Ender 3 V2, Kobra 2 Series, M5, M5c And More.
【Less-Tangle & Neatly Wound】Full Mechanical Winding And Strict Manual Inspection Ensures That All Rapid Petg Filaments Are Neatly Wound, Effectively Reduces Tangles And Snap Issues. Please Use It As Soon As Possible After Unpacking, Dry It Completely Before Using Again.
【Better Light Transmittance】Rapid Petg Has Good Light Transmittance, Less Warping And Low Shrinkage Compared To Pla. Any Parts That Involve Light Diffusion Is An Ideal Use Of Petg.
Features
- 30-600mm/s Printing Speed With enhanced fluidity, ELEGOO RAPID PETG filament melts rapidly and flows smoothly, allowing for up to 600mm/s fast printing speed. You can complete the projects quickly without compromising on quality
- Better Light Transmittance Rapid PETG has good light transmittance, less warping and low shrinkage compared to pla. Any parts that involve light diffusion is an ideal use of PETG
- Good Toughness & Easy to Use PETG combines the best features of ABS and PLA, it s as easy to print as pla, and has similar strength compared to ABS. Durable, flexible, highly impact resistant and odorless, ideal for printing daily necessities
- Less-tangle & Neatly Wound Full mechanical winding and strict manual inspection ensures that all rapid petg filaments are neatly wound, effectively reduces tangles and snap issues. Please use it as soon as possible after unpacking, dry it completely before using again
- Fit For High Speed Printer Fit for both regular printers and high speed printers, perfectly for most 1.75mm printers such as Neptune 4, Neptune 4 pro/plus/max, K1 series, Ender 3 V2, Kobra 2 series, M5, M5C and more
- See more on Amazon...
Brand: ELEGOO | Manufacturer: ELEGOO
Weight: 2.20 pounds
See On Amazon
Looking For Something Else?
Search