5pcs Solar Controller Board Battery Charging Controller Module Circuit Board for Solar Lamp
Asin: B0BRQSRJPL | Model: Marhynchusmyosudc3kg | PartNumber: Marhynchusmyosudc3kg
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Support Lithium Batteries, Lithium Iron Batteries And So On, Widely Applications..
Light Control Or Can Be Set As Non‑Light Control, The Default For Light Control, Charging During The Day, The Light Automatically On At Night..
Output With 1.1A Current, Automatic Recovery For Overcurrent Protection, Having Stable Performance..
Using No Photosensitive Resistor Light Control Technology, Suitable For Solar Lawn Lights, Solar Wall Lamp And So On..
Features
- Circuit board is controlled by single chip microcomputer to realize small volume and multi function.
- Using no photosensitive resistor light control technology, suitable for solar lawn lights, solar wall lamp and so on.
- Support lithium batteries, lithium iron batteries and so on, widely applications.
- Output with 1.1A current, automatic recovery for overcurrent protection, having stable performance.
- Light control or can be set as non light control, the default for light control, charging during the day, the light automatically on at night.
- See more on Amazon...
Brand: Marhynchus | Manufacturer: Marhynchus
See On Amazon Similar To 5pcs Solar Controller Board Battery
#1
DAOKI 5PCS 3S 10A 11.1V/12V/12.6V Lithium Battery Protection Board 18650 Charger Module BMS PCB Protection Board for Li-ion Lithium Battery Cell with Nickel Strip
Asin: B08SLQ9Y94 | Model: DR-US-507 | PartNumber: DR-US-507 | Ean: 0641841962777 | UPC: 641841962777
Protection: Over-Discharge Protection, Overcurrent Protection, Overcharge Protection, Short Circuit Protection..
Package Content:5 X 3S 10A 11.1V/12V/12.6V 18650 Lithium Battery Protection Board, 1 X 39.Inch/1M Nickel Strip.
Widely Used For Led Light Backup Power Supply, Solar Street Light Battery Pack, Monitor Standby Power Supply, Etc..
Maximum Working Current: 6-8A; High Efficiency And Low Consumption: You Can Easily Control The Battery Charge And Discharge Through The Mos Transistor.At The Same Time There Will Be Less Current Consumption.
Features
- Charging Voltage: 12.6 V~13 V; Charging Voltage Range: 4.25 0.05V to 4.35V; Discharge Voltage Range: 2.3 0.05V to 3.0V
- Maximum working current: 6-8A; High efficiency and low consumption: You can easily control the battery charge and discharge through the MOS transistor.At the same time there will be less current consumption
- Protection: Over-discharge Protection, Overcurrent Protection, Overcharge Protection, Short Circuit Protection.
- Widely used for LED light backup power supply, solar street light battery pack, monitor standby power supply, etc.
- Package Content:5 x 3S 10A 11.1V/12V/12.6V 18650 Lithium Battery Protection Board, 1 x 39.inch/1m Nickel Strip
- See more on Amazon...
Brand: DAOKI | Manufacturer: DAOKI
Weight: 0.22 Pounds
See On Amazon #2
ACEIRMC 2S 7.4V 8.4V 8A 18650 Charger PCB BMS Protection Board for Li-ion Lithium Battery Cell (5pcs)
Asin: B08HHY5YNY | Ean: 0701715445604 | UPC: 701715445604
Over-Discharge Protection, Overcurrent Protection, Overcharge Protection, Short Circuit Protection; A Combination Of 4 Safety Features That Work Together To Provide Ultimate Protection For Your Devices..
Attention: Strictly According To The Diagram Wiring: B+: Battery V+ Positive, B-: Battery V- Negative, P+: Output / Charging V+, P-: Output / Charging V-, Mb: The Connection Point Between The Batteries.Otherwise It Will Cause Damage To The Chip. Do Not Mix The Good Battery And Poor Battery To Use. The Internal Resistance Of 3 Battery Capacity Are Closer Will Be Better..
Mos Transistor Can Control The Battery Charge And Discharge, Low Standby Current Consumption..
Use For Variety Of Capacities And Various Shapes 3.7V Lithium Batteries,Massager Battery Pack, Led Light Backup Power Supply, Solar Street Light Battery Pack, Monitor Standby Power Supply, Etc..
Features
- HIGH-ACCURACY, HIGHLY DURABLE: High-accuracy voltage detection circuit, fine workmanship and durable, Effective life greater than 50000 hours.
- Use for variety of capacities and various shapes 3.7V lithium batteries,Massager battery pack, LED light backup power supply, solar street light battery pack, monitor standby power supply, etc.
- Over-discharge protection, overcurrent protection, overcharge protection, short circuit protection; A combination of 4 safety features that work together to provide ultimate protection for your devices.
- MOS transistor can control the battery charge and discharge, low standby current consumption.
- ATTENTION: Strictly according to the diagram wiring: B+: Battery V+ Positive, B-: Battery V- Negative, P+: Output / Charging V+, P-: Output / Charging V-, MB: The connection point between the batteries.Otherwise it will cause damage to the chip. Do not mix the good battery and poor battery to use. The internal resistance of 3 battery capacity are closer will be better.
- See more on Amazon...
Brand: ACEIRMC | Manufacturer: ACEIRMC
See On Amazon #3
Renogy 10 Amp 12V/24V PWM Negative Ground Solar Charge Controller Compact Design w/LCD Display for AGM, Gel, Flooded and Lithium Battery, Wanderer 10A
Asin: B07NPDWZJ7 | Model: Wanderer 10 Amp 12V/24V | PartNumber: Wanderer 10 Amp 12V/24V | Ean: 0816360029953 | UPC: 816360029953
【Multiple Types Of Charging Ports】 Integrated With 5V 2A Usb Ports, Allowing You To Conveniently Charge Your Phones, Tablets, And Other Usb-Powered Devices Directly From The Controller Without The Need For An Additional Power Source Or Adapter. With A Variety Of Charging Options, This Charge Controller Is Perfect For Those Who Need Flexibility In Their Charging Solutions..
【Extremely Low Self-Consumption】 Boasts An Extremely Low Self-Consumption Feature, Making It An Energy-Efficient And Practical Solution For Off-Grid Power Systems. With Its Low Self-Consumption Rate, The Charge Controller Consumes Minimal Power From The Battery, Allowing You To Maximize The Efficiency And Lifespan Of Your Power System..
【Real-Time Monitoring】 The Integrated Rs232 Port Works Perfectly With The Bt-1 Bluetooth Module To Deliver Real-Time Energy Data Across The Dc Home Smart Phone App & Renogy One M1, Your All-In-One Energy Monitoring And Off-Grid Smart Living Center..
【Diverse Load Control】 Multiple Load Control Modes Provide Unparalleled Flexibility And Maximum Efficiency When It Comes To Managing Your Energy Usage. Wanderer 10 Can Adapt To Your Specific Load Requirements By Set Up Parameters Directly From The Controller..
【Full System Protection】 Designed To Safeguard Your Solar System. It Provides A Comprehensive And Reliable Safeguard For Your Equipment And Devices Protection For Overcharging, Over-Discharging, Short-Circuit, Overload, Reverse Polarity, Reverse Current, And Temperature Compensation, Keeping Your Devices And Systems Running Smoothly And Safely..
Features
- 12V/24V Automatically Detect Automatically detects the voltage of the battery system (for non-lithium batteries) and adjusts the charging parameters accordingly, ensuring that the battery is charged safely and efficiently.
- Full System Protection Designed to safeguard your solar system. It provides a comprehensive and reliable safeguard for your equipment and devices protection for overcharging, over-discharging, short-circuit, overload, reverse polarity, reverse current, and temperature compensation, keeping your devices and systems running smoothly and safely.
- Multiple Types of Charging Ports Integrated with 5V 2A USB ports, allowing you to conveniently charge your phones, tablets, and other USB-powered devices directly from the controller without the need for an additional power source or adapter. With a variety of charging options, this charge controller is perfect for those who need flexibility in their charging solutions.
- Diverse Load Control Multiple load control modes provide unparalleled flexibility and maximum efficiency when it comes to managing your energy usage. Wanderer 10 can adapt to your specific load requirements by set up parameters directly from the controller.
- Extremely Low Self-Consumption Boasts an extremely low self-consumption feature, making it an energy-efficient and practical solution for off-grid power systems. With its low self-consumption rate, the charge controller consumes minimal power from the battery, allowing you to maximize the efficiency and lifespan of your power system.
- Real-time Monitoring The integrated RS232 port works perfectly with the BT-1 Bluetooth module to deliver real-time energy data across the DC Home smart phone app & Renogy ONE M1, your all-in-one energy monitoring and off-grid smart living center.
- See more on Amazon...
First Available: 04/30/2018
Brand: Renogy | Manufacturer: Renogy
Dimensions: 1.10 x 4.70 x 3.00 Inches | Weight: 0.27 pounds
Warranty: 1-year material warranty
See On Amazon #4
[Upgraded] 30A Solar Charge Controller, 12V/ 24V Solar Panel Regulator with Adjustable LCD Display Dual USB Port Timer Setting PWM Auto Parameter
Asin: B08NFSCZ4V | Model: H0911-2 | PartNumber: H0911-2 | Ean: 0713484981245 | UPC: 713484981245
【Safe To Use】With Intelligent Protection Against Overcurrent, Short-Circuit, Inverse, Low Voltage, And Overcharge, This 30A Solar Charge Controller Will Help You Improve The System Efficiency Safely And Prolong The Life Span Of The Battery..
【Buy With Confidence】12-Month Warranty And Lifetime Technique Support. If There Is Any Problem, Please Contact Us Through Amazon Email.
【Lcd Display】Let You Know The Status And Data With Lcd Display. You Can Also Switch Modes And Parameter Configuration Conveniently. You Can Aslo Use This Controller In A Different Places Like Home, Industrial, Commercial, Etc..
【Wide Compatibility】Compatible With 12V And 24V Systems. You Can Also Charge Your Mobile Phone, Tablet, Pcs Through Dual Usb Output 5V/2.5A (Max)..
Features
- UPGRADED SOLAR CONTROLLER This solar charge controller helps you manage the working of solar panels and batteries in solar systems automatically with the build-in industrial microcontroller. You don't need to reset it when the battery runs out cause it will memorize various parameters set by the user.
- WIDE COMPATIBILITY Compatible with 12V and 24V systems. You can also charge your mobile phone, tablet, PCs through Dual USB output 5V/2.5A (max).
- SAFE TO USE With Intelligent protection against overcurrent, short-circuit, inverse, low voltage, and overcharge, this 30A solar charge controller will help you improve the system efficiency safely and prolong the life span of the battery.
- LCD DISPLAY Let you know the status and data with LCD Display. You can also switch modes and parameter configuration conveniently. You can aslo use this controller in a different places like home, industrial, commercial, etc.
- BUY WITH CONFIDENCE 12-month warranty and lifetime technique support. If there is any problem, please contact us through amazon email
- See more on Amazon...
Brand: Depvko | Manufacturer: Depvko
See On Amazon #5
[Upgraded] 30A Solar Charge Controller, Black Solar Panel Battery Intelligent Regulator with Dual USB Port 12V/24V PWM Auto Paremeter Adjustable LCD Display (30a)
Asin: B08L8TBCK6 | Ean: 0713484981214 | UPC: 713484981214
Please Note: The Charge Regulator Is Only Suitable For Lead-Acid Batteries: Open, Agm, Gel. Do Not Support Any Other Batteries. The Solar Controller Will Turn Off Automatically To Protect The Lifespan Of Your Battery If The Voltage Of The Battery Drop Below 8V..
Warranty: 12-Month Warranty And Lifetime Technique Support. If There Is Any Problem, Please Contact Us Through Amazon Email, We Will Arrange A Refund Or A Replacement..
Lcd Display: Let You Know The Status And Data With Lcd Display. You Can Also Switch Modes And Parameter Configuration Conveniently And Can Use This Controller In A Different Place Like Home, Industrial, Commercial, Etc..
Safe To Use: Equipped With Overcurrent Protection, Short-Circuit Protection, Inverse Connection Protection, Low Voltage, And Overcharge Protection, And Have Fully 3-Stage Pwm Charge Management. This 30A Solar Charge Controller Will Help You Improve The System Efficiency Safely And Prolong The Life Span Of The Battery..
Features
- UPGRADED SOLAR PANEL CONTROLLER: Compatible with 12V 24V system.This solar charge controller helps you manage the working of solar panels and battery in solar systems automatically with the build-in industrial microcontroller. You don't need to reset it when the battery runs out cause it will memorize various parameters set by the user. You can also charge your mobile phone, tablet, PCs through Dual USB output 5V/2.5A (max).
- SAFE TO USE: Equipped with overcurrent protection, short-circuit protection, inverse connection protection, low voltage, and overcharge protection, and have fully 3-stage PWM charge management. This 30A solar charge controller will help you improve the system efficiency safely and prolong the life span of the battery.
- PLEASE NOTE: The charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL. Do not support any other batteries. The solar controller will turn off automatically to protect the lifespan of your battery if the voltage of the battery drop below 8V.
- LCD DISPLAY: Let you know the status and data with LCD Display. You can also switch modes and parameter configuration conveniently and can use this controller in a different place like home, industrial, commercial, etc.
- WARRANTY: 12-month warranty and lifetime technique support. If there is any problem, please contact us through amazon email, we will arrange a refund or a replacement.
- See more on Amazon...
Brand: Depvko | Manufacturer: Depvko
Dimensions: 1.30 x 5.28 x 2.80 inches
See On Amazon #6
Renogy Voyager 20A 12V/24V PWM Waterproof Solar Charge Controller w/ LCD Display for AGM, Gel, Flooded and Lithium Battery, Used in RVs, Trailers, Boats, Yachts, Voyager 20A
Asin: B07YXZMKD2 | Model: Voyager 20A PWM | PartNumber: Voyager 20A PWM | Ean: 0810009713517 | UPC: 810009713517
Multiple Protections: The Voyager Controller Has Multiple Intelligent Protections Against Reverse Polarity, Over Charge, Short-Circuit, Reverse Current, Overload, And Over Discharge, Keeping Your Battery Fully Protected..
Backlit Lcd Displaying System: The Voyager Comes With An Lcd Display Showing Accurate And Timely Information Including Charging Current, Generated Energy, Temperature, Battery Voltage, And Error Codes That Allows Users To Monitor And Control Charging..
Support Multiple Battery Types: The Voyager Controller Can Automatically Sense 12V Or 24V System Voltage When Paired With A Gel, Agm, Or Flooded Batteries. It Also Comes With A Lithium Activation Feature..
Ip67 Rated Waterproof: With An Ip67 Rated Waterproof Design, The Voyager Controller Is Suitable For Outdoor Use And Will Remain Fully Operational When Exposed To Water Spray, Rain, Or Condensation..
Features
- 4-STAGE PWM Technology: The Voyager controller is equipped with advanced smart PWM technology with high charging efficiency. It provides 4-stage charging (Bulk, Absorption, Float and Equalization) in order to protect the battery.
- IP67 Rated Waterproof: With an IP67 rated waterproof design, the Voyager controller is suitable for outdoor use and will remain fully operational when exposed to water spray, rain, or condensation.
- Multiple Protections: The Voyager controller has multiple intelligent protections against reverse polarity, over charge, short-circuit, reverse current, overload, and over discharge, keeping your battery fully protected.
- Support Multiple Battery Types: The Voyager controller can automatically sense 12V or 24V system voltage when paired with a Gel, AGM, or Flooded batteries. It also comes with a Lithium activation feature.
- Backlit LCD displaying system: The Voyager comes with an LCD display showing accurate and timely information including charging current, generated energy, temperature, battery voltage, and error codes that allows users to monitor and control charging.
- See more on Amazon...
First Available: 11/24/2020
Brand: Renogy | Manufacturer: Renogy
Dimensions: 1.40 x 6.08 x 3.83 inches | Weight: 0.55 Pounds
Warranty: 2-year material and workmanship warranty
See On Amazon #7
Renogy 30A 12V/24V PWM Solar Charge Controller with LCD Display Flush Mount Design Negative Ground, Compatible with Sealed, Gel, Flooded and Lithium Batteries, Adventurer 30A,black
Asin: B07BBKFTNV | Model: Adventurer 30A Li 12V/24V | PartNumber: Adventurer 30A Li 12V/24V | Ean: 0816360026396 | UPC: 816360026396
【Flush Mount Design】Designed To Cleanly Flush Mount On Walls, Providing A Sleek, Integrated Look. An Included Surface Mount Attachment Allows For Versatility In Mounting..
【Multiple Battery Adaptation】 Deep Cycle Sealed (Agm), Gel, Flooded And Lithium Battery Option Ready..
【Real-Time Monitoring】The Rs232 Port Can Work With The Bt-1 Bluetooth Module To Deliver Real-Time Energy Data Across The Dc Home Smart Phone App & Renogy One M1.
【Negative Ground】The Adventurer Is A Negative Ground Controller. This Ensure Compatibility With Any Negative Ground System, Which Is The Standard And Most Conventional Way Of Grounding. Any Negative Connection On The Solar Module, Battery And Load Can Be Safely Earth Grounded As Required..
【Smart 4-Stage Pwm Charging】Smart 4-Stage Pwm Charging (Bulk, Boost, Float, And Equalization) Increases Battery Life And Improves System Performance. Intelligent Protection Against Reverse Polarity, Overcharging, Short-Circuit, And Reverse Current..
Features
- 12V/24V Automatically Detect Automatically detects 12V or 24V DC system voltages (for non-lithium batteries). The LCD screen and multiple LED indicators display the solar charging and battery operation information, customizable parameters, and error codes.
- Smart 4-Stage PWM Charging Smart 4-Stage PWM charging (Bulk, Boost, Float, and Equalization) increases battery life and improves system performance. Intelligent protection against reverse polarity, overcharging, short-circuit, and reverse current.
- Flush Mount Design Designed to cleanly flush mount on walls, providing a sleek, integrated look. An included Surface Mount Attachment allows for versatility in mounting.
- Negative Ground The Adventurer is a negative ground controller. This ensure compatibility with any negative ground system, which is the standard and most conventional way of grounding. Any negative connection on the solar module, battery and load can be safely earth grounded as required.
- Multiple Battery Adaptation Deep Cycle Sealed (AGM), Gel, Flooded and Lithium battery option ready.
- Real-time Monitoring The RS232 port can work with the BT-1 Bluetooth module to deliver real-time energy data across the DC Home smart phone app & Renogy ONE M1
- See more on Amazon...
First Available: 02/22/2018
Brand: Renogy | Manufacturer: Renogy
Dimensions: 1.90 x 6.56 x 4.50 inches | Weight: 0.60 Pounds
Warranty: NEVER connect the solar panel array to the controller without a battery. Battery must be connected first. This may cause a dangerous occurrence where the controller would experience a high open circuit voltage at the terminals. • Ensure input voltage does not exceed 50 VDC to prevent permanent damage. Use the Open Circuit (Voc) to make sure the voltage does not exceed this value when connecting panels together in series. • The charge controller should be installed indoors in a well-ventilated, cool, and dry environment. • Do NOT allow water to enter the controller.
See On Amazon #8
Renogy Rover 40 Amp 12V/24V DC Input MPPT Solar Charge Controller Auto Parameter Adjustable LCD Display Solar Panel Regulator fit for Gel Sealed Flooded and Lithium Battery
Asin: B01MSYGZGI | Model: RNG-CTRL-RVR40 | PartNumber: RNG-CTRL-RVR40 | Ean: 0810009719328, 0816360024651 | UPC: 810009719328, 816360024651
【Full System Protection】Meant To Safeguard Your System, The Self-Diagnostic Capability Can Assess And Protect Against Reverse Polarity, Battery Overcharging, Battery Over-Discharging, Overload, Short-Circuiting, And Reverse Current.
【Diverse Load Control】 Connect Dc Appliances Directly To The Optional Load Terminals And Monitor Consumption Or Set Up Timer Controls Directly From The Controller.
【4-Stage Safely Charging】Features 4-Stage Charging (Bulk, Absorption, Float, And Equalization) Of Lead Acid Batteries And 2-Stage Charging (Bulk And Absorption) For Lithiuim Batteries As Well As Lithium Reactivation.
【12V/24V Automatically Detect】Automatically Detects 12V Or 24V Dc System Voltages (For Non-Lithium Battery Types), And The Lcd Screen And Multiple Led Indicators Display The Solar Charging And Battery Operation Information, Customizable Parameters, And Error Codes.
Features
- Innovative MPPT Design Die-cast aluminium design ensuring excellent heat dissipation and Renogy Maximum Power Point Tracking technology with a high tracking efficiency of up to 99% and peak conversion efficiency of 98% It is the best charging solution even in cloudy environments where the max power point of the solar panels will fluctuate all day
- 12V/24V Automatically Detect Automatically detects 12V or 24V DC system voltages (for Non-Lithium battery types), and the LCD screen and multiple LED indicators display the solar charging and battery operation information, customizable parameters, and error codes
- Full System Protection Meant to safeguard your system, the self-diagnostic capability can assess and protect against reverse polarity, battery overcharging, battery over-discharging, overload, short-circuiting, and reverse current
- 4-Stage Safely Charging Features 4-stage charging (Bulk, Absorption, Float, and Equalization) of Lead Acid Batteries and 2-stage charging (Bulk and Absorption) for Lithiuim batteries as well as Lithium Reactivation
- Diverse Load Control Connect DC appliances directly to the optional Load Terminals and monitor consumption or set up timer controls directly from the controller
- See more on Amazon...
First Available: 04/04/2016
Brand: Renogy | Manufacturer: Renogy
Dimensions: 2.85 x 6.81 x 9.37 inches | Weight: 2.43 pounds
Warranty: 2-year material warranty
See On Amazon #9
[Upgraded] 30A Solar Charge Controller 12V/ 24V Solar Panel Charge Controller Intelligent Regulator with Dual USB Port Auto Parameter LCD Display and Timer Setting ON/Off Hours
Asin: B09LLMK7PD | Model: R000079 | PartNumber: R000079 | Ean: 0761594900007 | UPC: 761594900007
3-Stage Pwm Control Charging: Fully 3-Stage Pwm Regulation Charging Using Direct Charge, Lifting Charge, Floating Charge Three-Stage Pwm Regulation Charging Mode. Using The Controller To Realize Efficient And Fast Intelligent Charging, And Effectively Prolong The Service Life Of The Battery..
Confidence Service: Our Brand Werchtay Team Has Complete After-Sales Service, And The Product Comes With An Instruction Manual. If You Encounter Problems, Please Contact Our Team. We Provide One-Year Warranty And Lifetime After-Sales Service..
Multiple Intelligent Protection: Built-In Overcurrent Protection, Short Circuit Protection, Reverse Connection Protection, Open Circuit Protection, All Automatic Recovery, No Damage To The Controller, A Reliable Protector For Your Devices. If The Battery Voltage Is Lower Than 8V, The Solar Controller Will Automatically Shut Down To Protect The Battery Life.
Functional Lcd Screen: Easy To Install And Operate, Intuitive Lcd Display That Can Clearly Indicate The Status And Data Is Able To Switch Modes And Parameter Configuration, The Level Of Complete Power-Off Is Adjustable, Which Can Perfectly Protect The Lithium Battery From Over-Discharge, Suitable For Home, Industrial, Commercial Etc..
Features
- SMART PWM TECHNOLOGY: The controller compatibility with 12V and 24V system, Discharge Current: 30A; dual USB output 5V / 2.5A, Build-in industrial microcontroller for automatical management, memorizing various parameters set by the user and the data won't be lost when the battery runs out, suitable for lead-acid batteries: OPEN, AGM, GEL. Controller mode: b1: lead-acid. b2: ternary lithium. b3: Lithium iron phosphate.
- FUNCTIONAL LCD SCREEN: Easy to install and operate, Intuitive LCD display that can clearly indicate the status and data is able to switch modes and parameter configuration, The level of complete power-off is adjustable, which can perfectly protect the lithium battery from over-discharge, suitable for home, industrial, commercial etc.
- 3-STAGE PWM CONTROL CHARGING: Fully 3-stage PWM regulation charging using direct charge, lifting charge, floating charge three-stage PWM regulation charging mode. Using the controller to realize efficient and fast intelligent charging, and effectively prolong the service life of the battery.
- MULTIPLE INTELLIGENT PROTECTION: Built-in overcurrent protection, short circuit protection, reverse connection protection, open circuit protection, all automatic recovery, no damage to the controller, a reliable protector for your devices. If the battery voltage is lower than 8V, the solar controller will automatically shut down to protect the battery life
- CONFIDENCE SERVICE: Our brand WERCHTAY team has complete after-sales service, and the product comes with an instruction manual. If you encounter problems, please contact our team. We provide one-year warranty and lifetime after-sales service.
- See more on Amazon...
Brand: WERCHTAY | Manufacturer: WERCHTAY
Dimensions: 1.50 x 5.30 x 2.75 inches
See On Amazon #10
Intelligent 10A MPPT Solar Charge Controller, Digital LCD Display + Temp Sensor, 10 Amp 12 Volt Solar Panel Regulator with MC4 Connector, Perfect for 12V AGM, Gel, Flooded, Lead-Acid, Lithium Battery
Asin: B09W61YHH9 | Model: MPPT Bare Wire Open End | PartNumber: MPPT Bare Wire Open End
【 Works With Multiple Batteries 】 Compatible With Variety Of 12 Volt Batteries Of Agm, Gel, Deep Cycle, Sealed, Lead-Acid, Flooded And Lifepo4 Lithium Battery. 3 Stages Smart Charging: Boost, Float, And Equalization To Get The Maximum Use Of Solar Energy. Great For Deep Cycle, Starter, Marine, Car, Powersport And More..
【 Bare Wire Open End Connector 】 Bare Wire Open End Plug And 2 Set Wire Quick Connector Included Makes It Easy To Connect With Most Of The Solar Panels And Batteries In The Market..
【 Visual Monitor & No Power Consumpation 】 Equipped With Digital Lcd Display To Visual Monitor The Working Conditions Of Solar Panels And Battery. Powered Directly By Sunlight, Not Drain From Your Battery ! Please Expose The Solar Panel To The Full Sun And Ensure There Is No Shadow Or Overcast To Get Sufficient Sunlight To Start The Charge Controller..
【 Temperature Compensation 】An Integrated Thermal Temp Sensor Eliminates Over-Charging In Hot Climates And Under-Charging In Cold Climates. Allowing High Efficient Charging To Your Batteries. Temp Compensation Specifications: -3Mv/℃/2V.
【 Full Protections To Ensure Safety 】 Built In Internal Protection System And Smart 3 Stages Charging To Safeguard Your Battery From Over-Charge, Over-Discharge, Over-Voltage, Over-Current, Over-Load, Short Circuit, Reverse Polarity And Over-Temperature, To Maximally Avoids The Damage Due To System Fault Or Installation Error And Ensure Your Battery To Efficiently And Safely Charged To 100%..
【 Compact & Portable 】Improved Over The Pwm Charge Controller, Allto Solar Mppt (Maximum Power Point Tracking) Charge Controller Bringing A New Generation To Maximizing Use Solar Power To Charge Your System, It Is 25% Smaller In Size But Captures As High As 15%-30% Performance To Charge The Battery With No Additional Self Power Consumption. High Tracking Efficiency Of Up To 95% While Pmw Charge Controller Is 65%-80%. Automatically Detect 12V Dc System Voltage..
Features
- MPPT CHARGE CONTROLLER + MC4 CONNECTOR This 10Amp MPPT solar charge controller has bare wire end and 2 set quick connectors enabling it to work with most of solar panels and batteries in the market.
- COMPACT & PORTABLE Improved over the PWM charge controller, Allto Solar MPPT (Maximum Power Point Tracking) charge controller bringing a new generation to maximizing use solar power to charge your system, it is 25% smaller in size but captures as high as 15%-30% performance to charge the battery with no additional self power consumption. High tracking efficiency of up to 95% while PMW charge controller is 65%-80%. Automatically detect 12V DC system voltage.
- WORKS WITH MULTIPLE BATTERIES Compatible with variety of 12 volt batteries of AGM, Gel, Deep Cycle, Sealed, Lead-acid, Flooded and LiFePO4 Lithium Battery. 3 stages smart charging: boost, float, and equalization to get the Maximum use of solar energy. Great for deep cycle, starter, marine, car, powersport and more.
- FULL PROTECTIONS TO ENSURE SAFETY Built in internal protection system and smart 3 stages charging to safeguard your battery from over-charge, over-discharge, over-voltage, over-current, over-load, short circuit, reverse polarity and over-temperature, to maximally avoids the damage due to system fault or installation error and ensure your battery to efficiently and safely charged to 100%.
- VISUAL MONITOR & NO POWER CONSUMPATION Equipped with digital LCD display to visual monitor the working conditions of solar panels and battery. Powered directly by sunlight, not drain from your battery ! Please expose the solar panel to the full sun and ensure there is no shadow or overcast to get sufficient sunlight to start the charge controller.
- TEMPERATURE COMPENSATION An integrated thermal temp sensor eliminates over-charging in hot climates and under-charging in cold climates. Allowing high efficient charging to your batteries. Temp compensation specifications: -3mV/ /2V
- BARE WIRE OPEN END CONNECTOR Bare wire open end plug and 2 set wire quick connector included makes it easy to connect with most of the solar panels and batteries in the market.
- See more on Amazon...
Brand: Allto Solar | Manufacturer: Allto Solar
Dimensions: 0.98 x 5.51 x 1.97 inches
See On Amazon #11
HUINE 20A 12V 24V Auto IP68 Waterproof PWM Solar Charge Controller Solar Panel Battery Intelligent Regulator for Solar System Caravan Boat(24 Hours Working Mode)
Asin: B07CK2PCC7 | Ean: 0661748132509 | UPC: 661748132509
Brand: HUINE | Manufacturer: HUINE
Dimensions: 0.83 x 3.23 x 1.77 inches | Weight: 0.26 pounds
See On Amazon #12
Bateria Power 10A 12V MPPT Solar Charge Controller, Intelligent Solar Panel Regulator with LED and LCD Display, Compatible with Sealed Flooded Gel AGM Lithium LiFePO4 Battery
Asin: B0C9LZ4GSF | Model: sunrock 10M | PartNumber: sunrock 10M
【100% Efficiently Mppt Charging】: The Mppt Solar Charge Controller Adopts A New Generation Mppt (Maximum Power Point Tracking) Charging Technology, Which Can Maximize The Receiving Efficiency And Can Be 30% Higher Than The Traditional Pmw Charging Performance..
【Compact & Portable】: Upgraded Design Brings A Smaller Size, Making The Solar Charger Controller More Compact And Portable. The Body Of The Controller Is 4.3X2 Inches With A Net Weight Of 137G. Compared With Other Controllers, This 10A Mppt Controller Will Save More Space When Install..
【Real-Time Monitoring】: Equipped With An Lcd Display And Led Indicator Light, Which Brings Convenience For You To Monitor The Working Status Of The Solar Panel And Battery. Lcd Display Menu Can Be Switched Quickly By One Button..
【Fast & Safe Charging】:The Solar Controller Utilizes A 3-Stage Charging (Equalize, Float, Boost) System To Optimize The Charging Performance And Protect The Battery. A Built-In Protection System Provides Multiple Protection(Over Charge Protection, Over Temperature Protection, Over Voltage Protection, Over Current Protection, Short Circuit Protection, Discharge Protection, Reserve Polarity Protection)..
【Plug & Play】: The Solar Charge Controller Owns Solar Panel Female And Male Connectors, Which Allow Quickly Connect To The Solar Panel. The Upgraded Quality Sae Connector Provides Tighter Connection. Note: When You Connect The Solar Controller, You Need To Connect The Battery First, Then Connect Pv Panel. Max Solar Input Power: 150W.
Features
- 12V Solar Charge Controller : The solar controller is specially designed for 12 Volt battery. With one button for selection, you can select battery type easily when charging. Compatible with various 12V batteries such as AGM, Gel, Deep Cycle, Sealed, Lead Acid, Flooded, and LiFePO4 lithium Battery.
- Plug & Play : The Solar Charge Controller owns solar panel female and male connectors, which allow quickly connect to the solar panel. The upgraded quality SAE connector provides tighter connection. Note: When you connect the solar controller, you need to connect the battery first, then connect PV panel. Max Solar Input Power: 150W
- 100% Efficiently MPPT Charging : The MPPT Solar Charge Controller adopts a new generation MPPT (Maximum Power Point Tracking) charging technology, which can maximize the receiving efficiency and can be 30% higher than the traditional PMW charging performance.
- Fast & Safe Charging :The solar controller utilizes a 3-stage charging (Equalize, Float, Boost) system to optimize the charging performance and protect the battery. A built-in protection system provides multiple protection(Over Charge Protection, Over Temperature Protection, Over Voltage Protection, Over Current Protection, Short Circuit Protection, Discharge Protection, Reserve Polarity Protection).
- Compact & Portable : Upgraded design brings a smaller size, making the solar charger controller more compact and portable. The body of the controller is 4.3x2 inches with a net weight of 137g. Compared with other controllers, this 10A MPPT controller will save more space when install.
- Real-time Monitoring : Equipped with an LCD display and LED indicator light, which brings convenience for you to monitor the working status of the solar panel and battery. LCD display menu can be switched quickly by one button.
- See more on Amazon...
Brand: Bateria Power | Manufacturer: Bateria Power
Dimensions: 1.00 x 4.30 x 2.00 inches
See On Amazon #13
VOLTSET Solar Charge Controller, 10A 12V Waterproof Solar Intelligent Regulator with LED Indicate Light for 12v Solar Battery Charger, Solar Battery Maintainer, and 12 Volt Battery Power Kit
Asin: B0CBBMTM5C | Model: 0023070700 | PartNumber: 0023070700
✅【Led Indicators Monitoring】The 12V Solar Controller Integrates 3 Clear Led Indicators To Help You Visualize The Working Status And Battery Condition Well At All Times. Red Light And Blue Light (Charging) - Blue Light (In Sunlight) - Green Light (Full Charge) - No Light (Short Circuit). When Solar Power Fails, You Can Check The Connection In Time. The Solar Charge Maintainer Is Only Powered By Solar Panels And Does Not Consume Battery Power..
✅【How To Connect】Please Recognize The Correctness Of The Positive And Negative Polarity Of The Solar Panel Controller Before Connecting. Our Controller Red Is The Positive Pole, And The Black Is The Negative Pole. Please Connect The Positive Pole To The Positive Pole And The Negative Pole To The Negative Pole. At The Same Time, We Have Attached A Polarity Converter..
✅【What You Get】1*Solar Charge Controller, 1*Manual And 2*Polarity Converter. Voltset Provides 12 Months Warranty And Our 7*24 Hours Technical Service Support. If You Have Any Questions, Please Contact Us Directly, We Will Solve The Problem For You In Time..
✅【Safety Use】12V Solar Charge Controller Has Multiple Protection Functions: Battery Undervoltage, Overvoltage, Output Overload, Short Circuit, Low Voltage, Damage Caused By Overcharging, And Solar Panel Anti-Reverse Connection Protection. This 10-Amp Solar Charge Controller Will Extend The Life Of Your Battery..
✅【Waterproof Charge Controller】Ip65 Waterproof, Suitable For Outdoor Use. 10A Charge Controller Solar Panel Is Only Suitable For 12V Solar Panels And 12V Batteries. The Maximum Power Of The Solar Panel Is 130W, And The Maximum Current Is 10A. Solar Controller Protects The Solar Battery From Excessive Electric Energy Damage..
Features
- Applicable to solar panels above 20W The 10A solar charge controller is suitable for solar panels above 20W, applicable to 12V batteries, and more efficient. Solar panels can convert light energy into electricity and store it in the battery, which will be protected by the solar controller.
- Waterproof Charge Controller IP65 waterproof, suitable for outdoor use. 10A charge controller solar panel is only suitable for 12V solar panels and 12V batteries. The maximum power of the solar panel is 130W, and the maximum current is 10a. Solar controller protects the solar battery from excessive electric energy damage.
- LED Indicators Monitoring The 12v solar controller integrates 3 clear LED indicators to help you visualize the working status and battery condition well at all times. Red light and Blue light (Charging) - Blue light (In Sunlight) - Green Light (Full Charge) - No Light (Short Circuit). When solar power fails, you can check the connection in time. The solar charge maintainer is only powered by solar panels and does not consume battery power.
- Safety Use 12v solar charge controller has multiple protection functions: battery undervoltage, overvoltage, output overload, short circuit, low voltage, damage caused by overcharging, and solar panel anti-reverse connection protection. This 10-amp solar charge controller will extend the life of your battery.
- How to Connect Please recognize the correctness of the positive and negative polarity of the solar panel controller before connecting. Our controller red is the positive pole, and the black is the negative pole. Please connect the positive pole to the positive pole and the negative pole to the negative pole. At the same time, we have attached a polarity converter.
- What You Get 1*solar charge controller, 1*manual and 2*polarity converter. Voltset provides 12 months warranty and our 7*24 hours technical service support. If you have any questions, please contact us directly, we will solve the problem for you in time.
- See more on Amazon...
Brand: Voltset | Manufacturer: Voltset
Dimensions: 1.30 x 4.70 x 3.90 inches
See On Amazon #14
EEEkit 30A Solar Charge Controller, Solar Panel Charger Controller 12V/24V, Multi-Function Adjustable LCD Display with Dual USB Port Timer Setting PWM Auto Parameter
Asin: B07R8TRJ8C | Model: H026100-E008135338FBA | PartNumber: H026100-E008135338FBA
Intelligent Design: Build-In Industrial Microcontroller For Automatical Management, Memorizing Various Parameters Set By The User And The Data Won't Be Lost When The Battery Runs Out. The Solar Controller Will Turn Off Automatically Once The Voltage Is Too Low..
Easy To Use: The Charge Controller Should Connect The Battery First, Then The Solar Panel, And Finally The Load! You Can Change The Settings By The Simple One-Button Operation. Don't Worry Of The Unsatisfied Product You Received. We Offer A 30-Days Money-Back Guarantee And 12-Month Warranty For Quality-Related Issues..
Functional Lcd Display: Intuitive Lcd Display That Can Clearly Indicate The Status And Data Is Able To Switch Modes And Parameter Configuration, Suitable For Home, Industrial, Commercial, Etc..
Reliable Protection: Eeekit Solar Charge Regulator Provides Over-Current Protection, Short-Circuit Protection, Inverse Connection Protection, Low Voltage And Overcharge Protection, A Reliable Protector For Your Devices..
Features
- WIDE COMPATIBILITY: The solar charger controller with 30A rated discharge current is compatible with 12V or 24V system automatically, suitable for lead-acid batteries: OPEN, AGM, GEL. Dual USB 5V/3A output ports support mobile phones, tablet PCs or other devices that require 5V voltage. Please read the manual carefully.
- RELIABLE PROTECTION: EEEKit solar charge regulator provides over-current protection, short-circuit protection, inverse connection protection, low voltage and overcharge protection, a reliable protector for your devices.
- INTELLIGENT DESIGN: Build-in industrial microcontroller for automatical management, memorizing various parameters set by the user and the data won't be lost when the battery runs out. The solar controller will turn off automatically once the voltage is too low.
- FUNCTIONAL LCD DISPLAY: Intuitive LCD display that can clearly indicate the status and data is able to switch modes and parameter configuration, suitable for home, industrial, commercial, etc.
- EASY TO USE: The charge controller should connect the battery first, then the solar panel, and finally the load! You can change the settings by the simple one-button operation. Don't worry of the unsatisfied product you received. We offer a 30-days money-back guarantee and 12-month warranty for quality-related issues.
- See more on Amazon...
Brand: EEEKit | Manufacturer: EEEKit
Dimensions: 2.50 x 7.00 x 13.50 inches
See On Amazon #15
LiTime 20Amp PWM 12V/24V Solar Charge Controller with LCD Display for LiFePO4 Lithium Battery ,AGM, Gel, FLD
Asin: B0CTJM9XBZ
[Abs High-Quality Material & Small Size] The Litime Pwm Solar Charge Controller Is Made Of High-Quality Abs Material, Which Is Sturdy And Durable. Small In Size Of 130 * 90 * 34.6Mm, With A Weight Of Only 0.21Kg..
[2 Year Warranty & Professional Service ] Litime Is Committed To Providing You With Satisfactory Service. Litime Provide 2 Years Warranty For Worry-Free Experience. We Also Provide Professional Technical Support And Online Customer Service With Quick Response Within 24 Hrs..
[Support Multiple Types Of Batteries] The Litime Solar Charge Controller Supports Batteries Such As Li/Fld/Gel/Sel, It Could Be Switched The Battery Types Freely According To Your Needs..
[Multiple Protection] Using Multiple Technologies To Provide You With Professional Protection. Battery Over-Discharge , Battery Over-Voltage, Short Circuit , Overload And Overheating Protection , Solar Over Voltage Protection..
Features
- [12V/24V Free Switching] The LiTime 20Amp solar charge Controller, supports 12V or 24V battery systems. Max Solar Input Power 340W/12V,680W/24V, DC load, 5V USB output, LCD screen. Multiple voltages and interfaces to choose, making it more convenient to use.
- [Multiple Protection] Using multiple technologies to provide you with professional protection. Battery over-discharge , Battery over-voltage, Short circuit , Overload and Overheating protection , Solar over voltage protection.
- [ABS High-quality Material & Small Size] The LiTime PWM solar charge controller is made of high-quality ABS material, which is sturdy and durable. Small in size of 130 * 90 * 34.6mm, with a weight of only 0.21kg.
- [Support Multiple Types of Batteries] The LiTime solar charge controller supports batteries such as LI/FLD/GEL/SEL, it could be switched the battery types freely according to your needs.
- [2 Year Warranty & Professional Service ] LiTime is committed to providing you with satisfactory service. LiTime provide 2 years warranty for worry-free experience. We also provide professional technical support and online customer service with quick response within 24 hrs.
- See more on Amazon...
Brand: Litime | Manufacturer: LiTime
Dimensions: 1.36 x 5.12 x 3.54 inches | Weight: 0.33 pounds
See On Amazon #16
GHB 20A 12V 24V Solar Charge Controller Auto Switch LCD Solar Panel Battery Regulator Charge Controller Overload Protection Temperature Compensation
Asin: B01LZZMDSQ | Model: CMG-2420 | PartNumber: CMG-2420 | Ean: 0611864444666 | UPC: 611864444666
Power-Efficient: Microcontroller Digital Accuracy, When Solar Panel Regulator Is Charging, The Arrow Between The Panel Icon And The Battery Icon Will Flash Fastly, When The Battery Was A Full Charge, It Will Be Slow Flashed, Will Stop Charging. The Function Of The Solar Charge Controller Is To Protect The Voltage Overshoot And Discharge. Available For Dc Lamp And Phone Charging (Please Correctly Connect The Positive And Negative Terminals, Makes Sure All Terminals Are Connected Tightly.).
Protection Functions: Overload And Short Circuit Protection, Lightning Protection, Under-Voltage Protection, Over-Charging Protection, Reverse Polarity Protection. Use Pwm And Wpc Mode, Improve System Efficiency And Prolong The Life Span Of The Battery.
Rated Discharge Current : 20A; Usb Output Voltage: 5V; Usb Output Current: 1.5A; Dc Output Voltage: 12V-24V, Dc Output Current: 20A. To Connect Your Load And The Cables With The Right Polarity And Then Connect With The Load Output Port Of The Controller. Pay Special Attention To + - Polarity To Avoid Reversed Connection.
Fully Automatic: This Solar Panel Regulator With Output Switch, Easy To Operate. The Battery Indicator Light On The Controller Will Be On If Successfully Connected.
Features
- LCD Screen Display: This solar panel charger controller with LCD digital screen which is with energy-saving backlight to display all parameters, display better, more clea and more power-efficient
- Fully Automatic: This solar panel regulator with output switch, easy to operate. The battery indicator light on the controller will be on if successfully connected
- Power-efficient: Microcontroller digital accuracy, when solar panel regulator is charging, the arrow between the panel icon and the battery icon will flash fastly, when the battery was a full charge, it will be slow flashed, will stop charging. The function of the solar charge controller is to protect the voltage overshoot and discharge. Available for DC lamp and phone charging (Please correctly connect the positive and negative terminals, makes sure all terminals are connected tightly.)
- Rated Discharge Current : 20A; USB Output Voltage: 5V; USB Output Current: 1.5A; DC Output Voltage: 12V-24V, DC Output Current: 20A. To connect your load and the cables with the right polarity and then connect with the load output port of the controller. Pay special attention to + - polarity to avoid reversed connection
- Protection Functions: Overload and Short circuit protection, Lightning protection, Under-voltage protection, Over-charging protection, Reverse Polarity protection. Use PWM and WPC mode, improve system efficiency and prolong the life span of the battery
- See more on Amazon...
Brand: GHB | Manufacturer: Smile&Satisfaction
Dimensions: 1.18 x 5.12 x 3.94 inches
See On Amazon #17
POWOXI Solar Panels Charge Controller, 8A Battery Regulator for 12V Solar Battery Charger, Solar Battery Maintainer and 12 Volt Batteries Power Kit
Asin: B07F85CDM6 | Model: Solar Panels Charge Controller 8A | PartNumber: Solar Panels Charge Controller 8A | Ean: 0674551458469 | UPC: 674551458469
【Easy To Monitor Led Indicator】: This Solar Controller Integrates Two Leds, Both Green And Red Indicator Lights Are On (Fully Charged) And Only The Red Indicator Light (Charging). It Also Provides Overcharge, Over-Discharge, And Overload Protection, As Well As Short Circuit And Reverses Connection Protection..
【Multiple Protection】: This Product Provides Overcharge, Over-Discharge, And Overload Protection, As Well As Short Circuit And Reverses Connection Protection..
【Note, The Controller Needs To Be Connected To The Battery To Work】 Advantage 1: It Will Automatically Turn Off At Night And Will Not Consume Battery Power. Advantage 2: If There Is A Connection Error, It Will Not Be Damaged..
【How To Connect】: Before Connecting, Please Recognize The Correctness Of Positive And Negative Polarity, Our Controller Red Is Positive, And Black Is Negative, Please Connect Positive To Positive, And Negative To Negative, We Have Attached A Polarity Converter, If The Product Does Not Work, Please Contact The After-Sales Email, We Will Reply You In Time..
【The Maximum Input Power Of Solar Energy Is 130W】: The Maximum Power Of Solar Panels Is 130W, The Maximum Voltage Is 22V, And The Maximum Current Is 8A. It Is Suitable For A 12V Rechargeable Battery. To Prolong Its Service Life, Please Do Not Overload It..
Features
- Applicable to solar panels above 20W : 8A solar controller is Applicable to solar panels above 20W and will be more efficient, applicable to 12V batteries. The solar panel can convert light energy into electricity stored in the battery, and the battery will be protected by the solar controller. The controller only rely on solar panels to power, and does not consume battery power.
- The maximum input power of solar energy is 130W : The maximum power of solar panels is 130W, the maximum voltage is 22V, and the maximum current is 8A. It is suitable for a 12V rechargeable battery. To prolong its service life, please do not overload it.
- Easy to Monitor LED Indicator : This solar controller integrates two LEDs, both green and red indicator lights are on (fully charged) and only the red indicator light (charging). It also provides overcharge, over-discharge, and overload protection, as well as short circuit and reverses connection protection.
- How to connect : Before connecting, please recognize the correctness of positive and negative polarity, our controller red is positive, and black is negative, please connect positive to positive, and negative to negative, we have attached a polarity converter, if the product does not work, please contact the after-sales email, we will reply you in time.
- Multiple protection : This product provides overcharge, over-discharge, and overload protection, as well as short circuit and reverses connection protection.
- Note, the controller needs to be connected to the battery to work Advantage 1: It will automatically turn off at night and will not consume battery power. Advantage 2: If there is a connection error, it will not be damaged.
- See more on Amazon...
Brand: POWOXI | Manufacturer: POWOXI
Dimensions: 3.90 x 4.70 x 1.50 inches | Weight: 5.90 ounces
See On Amazon #18
SOLPERK 8A 12V Waterproof Solar Charge Controller, Upgraded Solar Panel Controller, PWM Solar Battery Regulator with LED Display for 12V Batteries
Asin: B0CLRJWZ87 | Model: 8A Controller | PartNumber: 8A Controller | Ean: 3338138781520
[Led Display] This Controller Has Two Led Lights That Show You The Charging Status. You Can Easily See If The Battery Is Charging Or Fully Charged..
[Warranty And Support] We Offer A One-Year Warranty And Lifetime Technical Support For This Controller. We Also Have A 24/7 Customer Service Team That Can Answer Your Questions Within A Day..
[12V 8A Controller] This Controller Is Designed For 12V Solar Panels With A Maximum Current Of 8A, And 12V Rechargeable Batteries. It Works With 12V Batteries Such As Lifepo₄, Agm, Gel, And More..
[Easy To Use] This Controller Has A Handy Sae Connector That Plugs In Easily. Just Make Sure To Connect The Red Wire To The Positive Terminal And The Black Wire To The Negative Terminal Of Your Battery And Solar Panel..
[Zero Consumption From Battery] This Controller Uses Solar Power To Charge Your Battery, And It Doesn’T Drain Your Battery At Night. It Has Zero Power Consumption When There Is No Sunlight..
[Safe Controller] This Controller Has Six Safety Features To Protect Your Battery And Prevent Any Accidents. It Can Prevent Reverse Current, Overheating, Short Circuit, Overcharging, Over-Voltage, And Reverse Polarity. You Can Charge Your Battery With Peace Of Mind..
Features
- [Waterproof Controller] This controller is built to last in any weather. It has a waterproof seal that keeps it safe from rain, snow, and dust. It s perfect for outdoor use.
- [Safe Controller] This controller has six safety features to protect your battery and prevent any accidents. It can prevent reverse current, overheating, short circuit, overcharging, over-voltage, and reverse polarity. You can charge your battery with peace of mind.
- [LED Display] This controller has two LED lights that show you the charging status. You can easily see if the battery is charging or fully charged.
- [Zero Consumption from Battery] This controller uses solar power to charge your battery, and it doesn t drain your battery at night. It has zero power consumption when there is no sunlight.
- [12V 8A Controller] This controller is designed for 12V solar panels with a maximum current of 8A, and 12V rechargeable batteries. It works with 12V batteries such as LiFePO , AGM, GEL, and more.
- [Easy to Use] This controller has a handy SAE connector that plugs in easily. Just make sure to connect the red wire to the positive terminal and the black wire to the negative terminal of your battery and solar panel.
- [Warranty and Support] We offer a one-year warranty and lifetime technical support for this controller. We also have a 24/7 customer service team that can answer your questions within a day.
- See more on Amazon...
Brand: SOLPERK | Manufacturer: SOLPERK
See On Amazon #19
ECO-WORTHY Boost MPPT Solar Charge Controller 12A Solar Panel Regulator 24V/36V/48V/60V/72V Lead-Acid, LiFePO4, Gel, Flooded Battery in Golf Cart Electric Vehicles Solar System
Asin: B0B4SL5C2X
【95% Mppt Charging Efficiency】Using Innovative Mppt Technology, Charging Efficiency Up To 95% And Conversion Efficiency Up To 93%.
【Led Digital Display】Visual Display Of Charging Current And Voltage, Let You Easily Track The Battery Charging State.
【Warranty】1 Year With 24/7 Tech Support, If You Have Any Problems Or Questions About The Product, Please Feel Free To Contact Us Through Amazon Or Call Eco-Worhty Hotline, Eco-Worthy Team Will Actively Provide You With Professional Solutions.
【Multiple Protection Functions】Protection For Overcharge, Reverse Current, Overheat And Reverse Wiring.
【Applied To Multiple Types Of Battery】Max Capable Solar Panel Input Power: 216W/12V, 432W/24V; Charging 24V/36V/48V/60V/72V Lead-Acid Battery, Lithium Battery, Gel Battery, Flooded Batteries.
Features
- Boost Charging Boosts the voltage of 12V or 24V solar panels to charge 24V/36V/48V/60V/72V batteries in Golf Cart, Electric Vehicles, and Solar System Kit. No need to add additional solar panels or change the connection of solar panels
- Applied to multiple types of battery Max Capable Solar Panel Input Power: 216W/12V, 432W/24V; Charging 24V/36V/48V/60V/72V Lead-acid battery, Lithium battery, GEL battery, Flooded batteries
- 95% MPPT Charging Efficiency Using innovative MPPT technology, charging efficiency UP to 95% and conversion efficiency up to 93%
- Multiple Protection Functions Protection for overcharge, reverse current, overheat and reverse wiring
- LED digital display Visual display of charging current and voltage, let you easily track the battery charging state
- Warranty 1 year with 24/7 tech support, if you have any problems or questions about the product, please feel free to contact us through Amazon or call ECO-WORHTY hotline, ECO-WORTHY team will actively provide you with professional solutions
- See more on Amazon...
Brand: ECO-WORTHY | Manufacturer: ECO-WORTHY
Dimensions: 2.00 x 5.20 x 3.40 inches
See On Amazon #20
ECO-WORTHY 30A Solar Charger Controller Solar Panel Battery Intelligent Regulator with Dual USB Port Auto 12/24V PWM Positive Ground
Asin: B08JBLMC33
[Battery Type]: The Charge Regulator Is Suitable For Lead-Acid Batteries, Gel Batteries And Lithium Phosphate Batteries. For Protecting The Lifespan Of Your Battery, Once The Voltage Of The Battery Drop Below 8V, The Solar Controller Will Turn Off Automatically.
[Easy To Install And Operate]: The Charge Controller Should Connect The Battery First, Then The Solar Panel, And Finally The Load! The Disassembly Sequence Is Contrary To The Wiring Order.Dual Mosfet Reverse Current Protection, Low Heat Production. ( Note: The Charge Controller Will Heat Up When It Is Running. Please Be Careful To Install The Charger Controller On A Flat, Well-Ventilated Place).
[Lcd Display]: Comes With A Display That Can Clearly Indicate The Status And Data, It Can Be Conveniently Switched Modes And Parameter Configuration, Suitable For Home, Industrial, Commercial Etc..
[Multiple Protection Functions]: Eco-Worthy Solar Controller Has Short-Circuit Protection, Open-Circuit Protection,Reverse Protection, Over-Load Protection. Fully 3-Stage Pwm Charge Management, Improve System Efficiency And Prolong The Life Span Of The Battery.
Features
- [30A Solar Charge controller]: the solar charger controller compatibility with 12V 24V system. Discharge Current: 10A,build-in industrial micro controller, automatically manage the working of solar panel and battery in solar system. Dual USB output 5V/2.5A (max), to support mobile phone chargeing
- [Multiple Protection Functions]: ECO-WORTHY solar controller has short-circuit protection, open-circuit protection,reverse protection, over-load protection. Fully 3-stage PWM charge management, improve system efficiency and prolong the life span of the battery
- [Battery Type]: The charge regulator is suitable for lead-acid batteries, gel batteries and lithium phosphate batteries. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically
- [LCD Display]: Comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, suitable for home, industrial, commercial etc.
- [Easy to Install and Operate]: The charge controller should connect the battery first, then the solar panel, and finally the load! The disassembly sequence is contrary to the wiring order.Dual mosfet Reverse current protection, low heat production. ( Note: The charge controller will heat up when it is running. Please be careful to install the charger controller on a flat, well-ventilated place)
- See more on Amazon...
Brand: ECO-WORTHY | Manufacturer: ECO-WORTHY
See On Amazon
Looking For Something Else?
Search