PATIKIL 4" Light Fixture Mounting Bracket, 2 Pack Light Crossbar Circle Mounting Bracket Universal Hook Lamp Fixture Ground Screw for Chandelier Lamp Light
Asin: B0BSBKQVWT
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Instruction: Connect The Light And Light Crossbar With Screws..
Note: Please Confirm The Size And The Number Of Light Crossbar And Screws Before You Order..
Application: The Light Crossbar Acts As A Connector To Support The Chandelier Hanging. It Is Widely Used In Crystal Lamps, Floor Lamps, Wall Lamps, Ceiling Lamps And More..
Advantages: The Package Comes With All The Needed Accessories For Quick And Easy Installation. Made Of Carbon Steel After The Zinc Plating Surface Processing, It Is Solid And Durable To Use, Not Easy To Deform, Rust And Break..
Features
- Specification: Color: Silver Tone; Material: Carbon Steel (Zinc-plated); Diameter: 102mm / 4"; Thickness: 1.5mm / 0.06"; Hook Open Width: 15mm / 0.6"; Package List: 2 x Light Crossbar, 2 x Screws
- Advantages: The package comes with all the needed accessories for quick and easy installation. Made of carbon steel after the zinc plating surface processing, it is solid and durable to use, not easy to deform, rust and break.
- Instruction: Connect the light and light crossbar with screws.
- Application: The light crossbar acts as a connector to support the chandelier hanging. It is widely used in crystal lamps, floor lamps, wall lamps, ceiling lamps and more.
- Note: Please confirm the size and the number of light crossbar and screws before you order.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon Similar To PATIKIL 4 Light Fixture Mounting
#1
PATIKIL 4" Ceiling Light Plate Kit, 3 Pack Light Crossbar Mounting Bracket Universal Lamp Fixture Hardware Set for Chandelier Wall Light, Silver
Asin: B0BSBJSXXM
Instruction: Connect The Light And Light Crossbar With The Hardware In The Package..
Note:Please Confirm The Hardware And Accessories In The Kit Before You Order..
Application: The Light Crossbar Kit Is Used To Install The Light, Which Is Widely Used In Crystal Lamps, Floor Lamps, Wall Lamps, Ceiling Lamps, Led Lamps, Pendant Lights, Bathroom Lamps, Diy Lighting And More..
Advantages: The Package Comes With All The Needed Accessories For Quick And Easy Installation. The Light Crossbar Is Made Of Carbon Steel After The Zinc Plating Surface Processing, It Is Solid And Durable To Use, Not Easy To Deform, Rust And Break, And Has A Long Service Life..
Features
- Specification: Material: Carbon Steel (Zinc-plated); Thickness: 1.2mm / 0.05"; Total Length: 100mm / 4"; Mounting Hole Distance: 94mm / 3.7"; Center Hole Diameter: 11mm / 0.43"; Lamp Pipe Size: M10x1mm, 40mm; Mounting Screw Length: 26mm / 1.02"; Package List: 3 x Light Crossbar, 3 x Lamp Pipes, 3 x Ground Screws, 6 Set x Mounting Screws Parts, 3 x Lock Nuts, 3 x Gaskets
- Advantages: The package comes with all the needed accessories for quick and easy installation. The light crossbar is made of carbon steel after the zinc plating surface processing, it is solid and durable to use, not easy to deform, rust and break, and has a long service life.
- Instruction: Connect the light and light crossbar with the hardware in the package.
- Application: The light crossbar kit is used to install the light, which is widely used in crystal lamps, floor lamps, wall lamps, ceiling lamps, LED lamps, pendant lights, bathroom lamps, DIY lighting and more.
- Note:Please confirm the hardware and accessories in the kit before you order.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #2
PATIKIL 115mm Round Ceiling Light Plate Kit, 1 Set Light Fixture Mounting Bracket Plate Steel Crossbar Hardware for Pendant Lamp Chandelier
Asin: B0BQLSQNH4
Instruction: Convenient To Install, Screw This Plate Into Your Round Ceiling Light Base..
Note: You Might Need To Check The Length Of This Plate If It Can Be Installed In Your Round Ceiling Light Base..
Application: This Ceiling Light Plate Usually Mounting On The Ceiling Floor And It Is Used For Hanging A Chandelier Or Pendant Light. Extremely Suitable To Use At Places Like Home, Office, Bookstore, Or Other Places..
Advantages: Carbon Steel Material With Zinc Plating On The Surface, The Zinc Coating Provides Good Rust Resistance, Durable To Use. There Are Screws And Nuts Included In The Package, Which Can Save You Time And Effort..
Features
- Color: Silver; Material: Galvanized Carbon Steel; Inner Dia.: 47mm / 1.85 inch; Overall Size: 115x15.5mm / 4.53x0.61 inch (D*H); Package Content: 1 x Ceiling Light Plate (Screws, Wiring Nuts, Ground Screws Included)
- Advantages: Carbon steel material with zinc plating on the surface, the zinc coating provides good rust resistance, durable to use. There are screws and nuts included in the package, which can save you time and effort.
- Instruction: Convenient to install, screw this plate into your round ceiling light base.
- Application: This ceiling light plate usually mounting on the ceiling floor and it is used for hanging a chandelier or pendant light. Extremely suitable to use at places like home, office, bookstore, or other places.
- NOTE: You might need to check the length of this plate if it can be installed in your round ceiling light base.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #3
PATIKIL 4" Ceiling Light Plate Kit, 4 Pack Light Crossbar Mounting Bracket Universal Lamp Fixture Hardware Set for Chandelier Wall Light, Zinc Plated
Asin: B0BVT8P67R
Advantages: The Package Comes With All The Needed Accessories For Quick And Easy Installation. The Light Crossbar Is Made Of Carbon Steel After The Zinc Plating Surface Processing, It Is Solid And Durable To Use, Not Easy To Deform, Rust And Break, And Has A Long Service Life..
Note:Please Confirm The Hardware And Accessories In The Kit Before You Order..
Instruction: Connect The Light And Light Crossbar With The Hardware In The Package..
Specification: Material: Carbon Steel (Zinc-Plated); Thickness: 1.2Mm / 0.05"; Total Length: 100Mm / 4"; Mounting Hole Distance: 94Mm / 3.7"; Center Hole Diameter: 11Mm / 0.43"; Lamp Pipe Size: M10x1mm, 40Mm; Mounting Screw Length: 26Mm / 1.02"; Package List: 4 X Light Crossbar, 4 X Lamp Pipes, 4 X Ground Screws, 8 Set X Mounting Screws Parts, 4 X Lock Nuts, 4 X Gaskets.
Features
- The light crossbar kit is used to install the light, which is widely used in crystal lamps, floor lamps, wall lamps, ceiling lamps, LED lamps, pendant lights, bathroom lamps, DIY lighting and more.
- Specification: Material: Carbon Steel (Zinc-plated); Thickness: 1.2mm / 0.05; Total Length: 100mm / 4; Mounting Hole Distance: 94mm / 3.7; Center Hole Diameter: 11mm / 0.43; Lamp Pipe Size: M10x1mm, 40mm; Mounting Screw Length: 26mm / 1.02; Package List: 4 x Light Crossbar, 4 x Lamp Pipes, 4 x Ground Screws, 8 Set x Mounting Screws Parts, 4 x Lock Nuts, 4 x Gaskets
- Advantages: The package comes with all the needed accessories for quick and easy installation. The light crossbar is made of carbon steel after the zinc plating surface processing, it is solid and durable to use, not easy to deform, rust and break, and has a long service life.
- Instruction: Connect the light and light crossbar with the hardware in the package.
- Note:Please confirm the hardware and accessories in the kit before you order.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #4
PATIKIL E27 to E14 Lamp Shade Reducing Ring, 10 Pack Lampshade Adapter Ring Converter Reducer Fitting Light Fixtures Replacement, 2 Styles
Asin: B0C6HZXGFZ
Instruction: Easy To Install, Just Screw And Install It On The Socket..
Note: Please Check Your Light Socket Before Buying.This Is A Converter For E27 To E14..
Application: The Lamp Shade Reducing Ring Is A Good Replacement. It Can Secure Your Lampshades For Your Table Lamps, Pendant Lights, Floor Lamps, And Chandeliers..
Advantage: You Can Replace Your Old Or Broken Lamp Holder Rings. A Convenient Converter For You To Use..
Features
- Buckle Style Size: 49mm x 29mm x 6.5mm / 1.93" x 1.14" x 0.26"(OD*ID*T); Buckle Style Overall Width: 60mm / 2.36"; Buckle Style Mounting Diameter: 38mm / 1.5"; C Shape Style Size: 44mm x 30mm x 4mm / 1.73" x 1.18" x 0.16"(OD*ID*T); Package Content: 10 Pcs x Ring
- Advantage: You can replace your old or broken lamp holder rings. A convenient converter for you to use.
- Instruction: Easy to install, just screw and install it on the socket.
- Application: The lamp shade reducing ring is a good replacement. It can secure your lampshades for your table lamps, pendant lights, floor lamps, and chandeliers.
- Note: Please check your light socket before buying.This is a converter for E27 to E14.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
Dimensions: 1.93 x 1.14 x 0.01 inches | Weight: 0.09 pounds
See On Amazon #5
PATIKIL Ceiling Hanging Wire Cable Kit, 4 Set Lights Panel Steel Hanging Chains Adjustable Rope Clamp for Pendant Light Aquarium Lights
Asin: B0CCP9D3G1
Application: Light Hanging Lamps Fastener Kit Widely Used In Chandeliers, Chandelier Coral Lights Billboards, Ceiling Lamps, Aquarium Lights, Table Lamps, Restaurant Lamps, Bar Lamps, Fancy Lamps, And A Variety Of Diy Hanging Lighting Fixtures Use..
Note: Please Check Whether This Product Is Suitable For Your Wire Before Placing An Order..
Instruction: 1. Insert The Wire Directly Into The Auto-Lock And Press The Tip Of The Cord Grip To Adjust The Length Freely. 2. Adjust The Length Of The Wire Freely. You Can Shorten The Lighting Hanging Chains By Rolling Up Or Trimming. It Is Better To Roll It Up When A Shorter Length Is Needed..
Advantage: The Adjustable Hanging Lanyard System Is Made Of Carbon Steel, Durable And Long-Lasting. Easy To Install, Suitable For Most Led Panel Lights Chandelier Coral Lights Billboards. The Length Of The Cable Is Adjustable Which Is Able To Meet Different Height Needs..
Features
- Color: Silver; Material: Carbon Steel; Surface Finish: Electroplating; Screw Thread: M10*1; Cord Grip Size: 15 x 17 mm/ 0.59 x 0.67 inch (Dia*L); Base Size: 10 x 37mm/0.39 x 1.46 inch(Dia*L); Rope Length: 1m/ 3ft; Range of Application: 1.2-2.0mm Steel Wire Rope; Packing List: 4 x Hanging Chains with Mounting Studs, Threaded Joints, and Connection Buckles; 4 x Wall Plugs; 4 x Self Tapping Screws
- Advantage: The adjustable hanging lanyard system is made of carbon steel, durable and long-lasting. Easy to install, suitable for most LED panel lights chandelier coral lights billboards. The length of the cable is adjustable which is able to meet different height needs.
- Application: Light hanging lamps fastener kit widely used in chandeliers, chandelier coral lights billboards, ceiling lamps, aquarium lights, table lamps, restaurant lamps, bar lamps, fancy lamps, and a variety of DIY hanging lighting fixtures use.
- Instruction: 1. Insert the wire directly into the auto-lock and press the tip of the cord grip to adjust the length freely. 2. Adjust the length of the wire freely. You can shorten the lighting hanging chains by rolling up or trimming. It is better to roll it up when a shorter length is needed.
- NOTE: Please check whether this product is suitable for your wire before placing an order.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #6
Awclub White Goof Trim Ring for 3 Inch Recessed Cans Downlights for Ceiling Light Fixtures, 4 Pack 3.2-Inch Inner Diameter, 4.5-Inch Outer Diameter, Steel Construction
Asin: B0CDV17KJ1 | Model: Roof Ring | PartNumber: Roof Ring
Application: This Trim Ring Is A Lamp Hole Replenish Ring，Primarily Used To Hide Mounting Hole Gaps In Downlights And Spotlights. By Using This Trim Ring, You Can Achieve A Seamless Appearance On Your Ceiling, Similar To Adding Spacers To Led Lights. It Effectively Covers Any Imperfections Such As Torn Drywall, Damaged Areas, Mis-Cuts, Or Oversized Holes, Giving Your Ceiling A Clean And Tidy Finish..
Note: Please Check The Mounting Hole Size Of Your Downlight/Spotlight And The Size Of The Ceiling Opening Before Purchasing The Trim Ring To Ensure Proper Fitment And Compatibility..
Installation: Place The Baffle Into The Trim Ring. The Trim Ring Is Held In Place By The Baffle. Once The Baffle Is Inside The Trim Ring, Position The Baffle Into The Recessed Lighting Housing And Clip It Into Place With Springs. No Additional Tools Are Required For Installation..
Material: The Roof Ring Is Made Of Steel, Ensuring Long-Lasting Use And Resistance To Wear And Tear. It Provides A Reliable Solution For Hiding Mounting Hole Gaps In Downlights And Spotlights..
Features
- Size: Outer Diameter: 4.5 inches. Inner Diameter: 3.2 inches. Thickness: 0.125 inches Color: White
- Material: The Roof Ring is made of steel, ensuring long-lasting use and resistance to wear and tear. It provides a reliable solution for hiding mounting hole gaps in downlights and spotlights.
- Application: This Trim Ring is a lamp hole replenish ring primarily used to hide mounting hole gaps in downlights and spotlights. By using this trim ring, you can achieve a seamless appearance on your ceiling, similar to adding spacers to LED lights. It effectively covers any imperfections such as torn drywall, damaged areas, mis-cuts, or oversized holes, giving your ceiling a clean and tidy finish.
- Installation: Place the baffle into the trim ring. The trim ring is held in place by the baffle. Once the baffle is inside the trim ring, position the baffle into the recessed lighting housing and clip it into place with springs. No additional tools are required for installation.
- Note: Please check the mounting hole size of your downlight/spotlight and the size of the ceiling opening before purchasing the Trim Ring to ensure proper fitment and compatibility.
- See more on Amazon...
Brand: Awclub | Manufacturer: Awclub
See On Amazon #7
PATIKIL Ceiling Hook Kit, Cross Design Metal Plate Mount Hanger Holder Ceiling Fan Light Fixture for Hanging Light Chandelier
Asin: B0BQYLGLMN | Model: pta220901tt0602 | PartNumber: pta220901tt0602
Instruction: Put The Plastic Expansion Tube Into The Mounting Hole, And Then Install The Hook, Finally Screw It With Screws..
Note: Need To Confirm The Max Load Of This Hook Before Buying..
Application: This Hook Is Very Suitable To Be Installed On The Ceiling Light Plate. Good For Hanging Chandeliers, Ceiling Fans, Pendant Lights, Lanterns, And Other Light Fixtures In Your Home..
Advantage: Carbon Steel Material With Zinc Plating, Good Hardness And Rust Resistance, Durable To Use. Cross Design, Strong Enough For Holding The Pendant Light.
Features
- Material:Carbon Steel; Finish: Zinc Plating; Max Load: 8 KG(17.64 lb); Hook Open Width: 12mm / 0.47"; Hook Total Size: 97x17x37mm / 3.82"x0.67"x1.46"; Mounting Hole Size: 15mmx6mm / 0.59"x0.24"(L*W), 6mm / 0.24"(Dia.)
- Advantage: Carbon steel material with zinc plating, good hardness and rust resistance, durable to use. Cross design, strong enough for holding the pendant light
- Instruction: Put the plastic expansion tube into the mounting hole, and then install the hook, finally screw it with screws.
- Application: This hook is very suitable to be installed on the ceiling light plate. Good for hanging chandeliers, ceiling fans, pendant lights, lanterns, and other light fixtures in your home.
- Note: Need to confirm the max load of this hook before buying.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #8
PATIKIL 3.5mm Lamp Shade Clips for Ceiling Flush Mount, 6 Pair Fixed Buckle Light Fixture Accessories ABS Plastic White
Asin: B0BNG8PH26
Instruction: 1. Find The Hole Position Of The Lampshade Base. 2. Insert The Clips Cap Into The Holes Of The Lampshade. 3. Insert The Rotary Buckle. 4. Finally Tighten The Screws To Fix It..
Note: 1. There Will Be A 1-2Mm Error In The Manual Measurement Size, But It Will Not Affect The Installation. 2. Please See The Hole Position Of The Lampshade Before Placing An Order..
Application: Suitable For Led Ceiling Lights, These Ceiling Light Fixing Buckles Can Firmly Fix The Led Light To The Ceiling, Protecting The Ceiling Light From Damage Such As Thermal Expansion..
Advantage: 1. Made Of Abs Plastic, Practical And Durable, Long-Lasting Use. 2. Light Color Does Not Affect Appearance. 3. The Ceiling Light Clips Are Easy To Install And As The Fixture For The Ceiling Light..
Features
- Color: White; Material: ABS Plastic; Overall Size: 47 x 11 x 15mm/1.85" x 0.43" x 0.59"(L*W*H), 25 x 13 x 15mm/0.98" x 0.51" x 0.59" (L*W*H); Mounting Hole Diameter: 3.5mm/0.14"; Screw Size: 3 x 10mm/0.12" x 0.39" (Dia*Length); Packing List: 6 Pair x Ceiling Light Buckles, 6 Pcs x Screws
- Advantage: 1. Made of ABS plastic, practical and durable, long-lasting use. 2. Light color does not affect appearance. 3. The ceiling light clips are easy to install and as the fixture for the ceiling light.
- Instruction: 1. Find the hole position of the lampshade base. 2. Insert the clips cap into the holes of the lampshade. 3. Insert the rotary buckle. 4. Finally tighten the screws to fix it.
- Application: Suitable for LED ceiling lights, these ceiling light fixing buckles can firmly fix the LED light to the ceiling, protecting the ceiling light from damage such as thermal expansion.
- NOTE: 1. There will be a 1-2mm error in the manual measurement size, but it will not affect the installation. 2. Please see the hole position of the lampshade before placing an order.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #9
PATIKIL 120mm (4.72") Universal Light Fixture Mounting Bracket Kit, 2set Light Crossbar Round Ceiling Plate for Wall Light, Close to Ceiling Light, Chandelier
Asin: B0CT2BWL9Q
Instruction: Convenient To Install, Screw This Plate Into Your Round Ceiling Light Base..
Note: You Might Need To Check The Length Of This Plate If It Can Be Installed In Your Round Ceiling Light Base..
Application: This Ceiling Light Plate Usually Mounted On The Ceiling Floor And It Is Used For Hanging A Chandelier Or Pendant Light. Extremely Suitable To Use At Places Like Home, Office, Bookstore, Or Other Places..
Advantages: Carbon Steel Material With Zinc Plating On The Surface, The Zinc Coating Provides Good Rust Resistance And Is Durable To Use. There Are Screws And Nuts Included In The Package, Which Can Save You Time And Effort..
Features
- Color: Silver; Material: Galvanized Carbon Steel; Inner Dia.: 47mm / 1.85 inch; Thickness: 1.5mm / 0.06 inch; Overall Size: 120x15mm / 4.72x0.59 inch (L*H); Packing List: 2 x Ceiling Light Plate (Screws, Wiring Nuts, Ground Screws Included)
- Advantages: Carbon steel material with zinc plating on the surface, the zinc coating provides good rust resistance and is durable to use. There are screws and nuts included in the package, which can save you time and effort.
- Instruction: Convenient to install, screw this plate into your round ceiling light base.
- Application: This ceiling light plate usually mounted on the ceiling floor and it is used for hanging a chandelier or pendant light. Extremely suitable to use at places like home, office, bookstore, or other places.
- NOTE: You might need to check the length of this plate if it can be installed in your round ceiling light base.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #10
PATIKIL Ceiling Hanging Wire Cable Kit, 4 Set Lights Panel Steel Hanging Chains Adjustable Rope Clamp for Pendant Light Fitting Aquarium Lights
Asin: B0CCP99LMH
Application: Light Hanging Lamps Fastener Kit Widely Used In Chandeliers, Chandelier Coral Lights Billboards, Ceiling Lamps, Aquarium Lights, Table Lamps, Restaurant Lamps, Bar Lamps, Fancy Lamps, And A Variety Of Diy Hanging Lighting Fixtures Use..
Note: Please Check Whether This Product Is Suitable For Your Wire Before Placing An Order..
Instruction: 1. Insert The Wire Directly Into The Auto-Lock And Press The Tip Of The Cord Grip To Adjust The Length Freely. 2. Adjust The Length Of The Wire Freely. You Can Shorten The Lighting Hanging Chains By Rolling Up Or Trimming. It Is Better To Roll It Up When A Shorter Length Is Needed..
Advantage: The Adjustable Hanging Lanyard System Is Made Of Carbon Steel, Durable And Long-Lasting. Easy To Install, Suitable For Most Led Panel Lights Chandelier Coral Lights Billboards. The Length Of The Cable Is Adjustable Which Is Able To Meet Different Height Needs..
Features
- Color: Silver; Material: Carbon Steel; Surface Finish: Electroplating; Screw Thread: M10*1; Cord Grip Size: 12 x 19 mm/ 0.47 x 0.75 inch (Dia*L); Base Size: 15 x 32mm/0.59 x 1.26inch(Dia*L); Rope Length: 1m/ 3ft; Range of Application: 1.2-2.0mm Steel Wire Rope; Packing List: 4 x Hanging Chains with Mounting Studs, Threaded Joints, and Connection Buckles; 4 x Wall Plugs; 4 x Self Tapping Screws
- Advantage: The adjustable hanging lanyard system is made of carbon steel, durable and long-lasting. Easy to install, suitable for most LED panel lights chandelier coral lights billboards. The length of the cable is adjustable which is able to meet different height needs.
- Application: Light hanging lamps fastener kit widely used in chandeliers, chandelier coral lights billboards, ceiling lamps, aquarium lights, table lamps, restaurant lamps, bar lamps, fancy lamps, and a variety of DIY hanging lighting fixtures use.
- Instruction: 1. Insert the wire directly into the auto-lock and press the tip of the cord grip to adjust the length freely. 2. Adjust the length of the wire freely. You can shorten the lighting hanging chains by rolling up or trimming. It is better to roll it up when a shorter length is needed.
- NOTE: Please check whether this product is suitable for your wire before placing an order.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #11
PATIKIL 4" ID 5.5" OD Light Trim Ring, White Goof Ring Matte Circular Light Cover Lighting Fixture for Ceiling Wall Recessed Can Downlights
Asin: B0B6PYPG3C
Instruction: Place The Baffle Into The Trim Ring, Trim Ring Is Held In Place By The Baffle. Once Baffle Is Inside Of Trim Ring Then Position The Baffle Into Recessed Lighting Housing And Clip Into Place With Springs.
Note: Please Note That The Dimensions Of The Ring Are *Not* Nominal, They Are Actual. Be Careful When Ordering..
Application: This Trim Ring Is A Lamp Hole Replenish Ring, Which Is Mainly Used To Hide The Mounting Hole Gaps Of Downlights And Spotlights. Using It Is Equivalent To Adding Spacers To The Led Light. Achieve A Seamless Ceiling Appearance With Our White Metal Trim Rings. Designed To Cover Any Wall Mounting Hole Imperfections Such As Torn Drywall, Damaged Areas, Mis-Cuts, Or Oversized Holes, These Trim Rings Hiding Flaws And Give Your Ceiling A Clean And Tidy Finish..
Advantage: This Trim Ring Thickness Is Only 0.03 Inches, Its Overlay Sits Flush Against The Ceiling In Between The Drywall And The Recessed Light. Also Works With Ceiling Fans And Pendant Lights. Steel Material, Durable To Use..
Features
- Size: Diameter: 140 101 0.8mm / 5.5 4 0.03 inch (Outer Diameter*Inner Diameter*Thickness); Color: White; Material: Steel
- Advantage: This trim ring thickness is only 0.03 inches, its overlay sits flush against the ceiling in between the drywall and the recessed light. Also works with ceiling fans and pendant lights. Steel material, durable to use.
- Instruction: Place the Baffle into the trim ring, trim ring is held in place by the baffle. Once Baffle is inside of trim ring then position the baffle into recessed lighting housing and clip into place with springs
- Application: This Trim Ring is a lamp hole replenish ring, which is mainly used to hide the mounting hole gaps of downlights and spotlights. Using it is equivalent to adding spacers to the LED light. Achieve a seamless ceiling appearance with our white metal trim rings. Designed to cover any wall mounting hole imperfections such as torn drywall, damaged areas, mis-cuts, or oversized holes, these trim rings hiding flaws and give your ceiling a clean and tidy finish.
- NOTE: Please note that the dimensions of the ring are *not* nominal, they are actual. Be careful when ordering.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
Dimensions: 0.03 x 5.50 x 5.50 inches | Weight: 0.16 pounds
Warranty: Not applicable.
See On Amazon #12
PATIKIL 125mm Ceiling Light Plate Kit, 1 Set Pendant Light Lighting Fixture Mounting Bracket Hardware for Home Office Chandelier
Asin: B0BQLCTY4R
Instruction: Convenient To Install, Screw This Plate Into Your Round Ceiling Light Base..
Note: You Might Need To Check The Length Of This Plate If It Can Be Installed In Your Round Ceiling Light Base..
Application: This Ceiling Light Plate Usually Mounting On The Ceiling Floor And It Is Used For Hanging A Chandelier Or Pendant Light. Extremely Suitable To Use At Places Like Home, Office, Bookstore, Or Other Places..
Advantages: Carbon Steel Material With Zinc Plating On The Surface, The Zinc Coating Provides Good Rust Resistance, Durable To Use. There Are Screws And Nuts Included In The Package, Which Can Save You Time And Effort..
Features
- Color: Silver; Material: Galvanized Carbon Steel; Screw Size: M4*12(0.7mm Pitch), M4*20(0.7mm Pitch); Thickness: 1.5mm / 0.06"; Overall Size: 125x18x16mm / 4.92"x0.71"x0.63"(L*W*H); Package Content: 1 x Ceiling Light Plate
- Advantages: Carbon steel material with zinc plating on the surface, the zinc coating provides good rust resistance, durable to use. There are screws and nuts included in the package, which can save you time and effort.
- Instruction: Convenient to install, screw this plate into your round ceiling light base.
- Application: This ceiling light plate usually mounting on the ceiling floor and it is used for hanging a chandelier or pendant light. Extremely suitable to use at places like home, office, bookstore, or other places.
- NOTE: You might need to check the length of this plate if it can be installed in your round ceiling light base.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #13
PATIKIL 4" Light Fixture Mounting Bracket, 2 Pack Light Crossbar Round Ceiling Fan Mount Plate Universal with Ground Screw for Home Chandelier Lamp, Silver
Asin: B0BSBL4C5Q
Instruction: Connect The Light And Light Crossbar With Screws..
Note: Please Confirm The Size And The Number Of Light Crossbar And Screws Before You Order..
Application: The Light Crossbar Acts As A Connector To Support The Chandelier Hanging. It Is Widely Used In Crystal Lamps, Floor Lamps, Wall Lamps, Ceiling Lamps And More..
Advantages: The Package Comes With All The Needed Accessories For Quick And Easy Installation. Made Of Carbon Steel After The Zinc Plating Surface Processing, It Is Solid And Durable To Use, Not Easy To Deform, Rust And Break..
Features
- Specification: Color: Silver Tone; Material: Carbon Steel (Zinc-plated); Diameter: 102mm / 4"; Thickness: 1.5mm / 0.06"; Center Hole Diameter: 47mm / 1.85 inch; Package List: 2 x Light Crossbar, 2 x Screws
- Advantages: The package comes with all the needed accessories for quick and easy installation. Made of carbon steel after the zinc plating surface processing, it is solid and durable to use, not easy to deform, rust and break.
- Instruction: Connect the light and light crossbar with screws.
- Application: The light crossbar acts as a connector to support the chandelier hanging. It is widely used in crystal lamps, floor lamps, wall lamps, ceiling lamps and more.
- Note: Please confirm the size and the number of light crossbar and screws before you order.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #14
PATIKIL Goof Rings for 4" Inch Recessed Can Lighting Down Light, 6 Pcs Metal Goof Trim Rings Cover, Outer Diameter 6.7-inch, Inner Diameter 4.25-inch, Matte Finish Black Flush Mount
Asin: B0D14WG956
Good Quality Material: The Recessed Light Trim Cover Is Made Of Carbon Steel Material Which Has High Strength And Rigidity, Can Withstand Greater Pressure And Load, And Its Surface Hardness Can Effectively Resist Friction And Wear For A Long Lifespan..
Application: This Trim Ring Is A Lamp Hole Replenishment Ring, Which Is Mainly Used To Hide The Mounting Hole Gaps Of Downlights And Spotlights. Using It Is Equivalent To Adding Spacers To The Led Light. Achieve A Seamless Ceiling Appearance With Our White Metal Trim Rings. Designed To Cover Any Wall Mounting Hole Imperfections Such As Torn Drywall, Damaged Areas, Mis-Cuts, Or Oversized Holes, These Trim Rings Hiding Flaws And Give Your Ceiling A Clean And Tidy Finish..
Easy To Install: Place The Baffle Into The Trim Ring, The Trim Ring Is Held In Place By The Baffle. Once Baffle Is Inside Of Trim Ring Then Position The Baffle Into The Recessed Lighting Housing And Put It Into Place With Springs.
Goof Rings For Recessed Lights: This Trim Ring Thickness Is Only 0.04 Inches, Its Overlay Sits Flush Against The Ceiling In Between The Drywall And The Recessed Light. Also Works With Ceiling Fans And Pendant Lights. Steel Material, Durable To Use..
Features
- Size: The goof rings for recessed lights come in 6 packs, Color: Matte Finish Black; Material: Steel, which measure 6.7 x 4.25 x 0.04inches/170 x 108 x 1mm(Outer Diameter*Inner Diameter*Thickness). NOTE: The dimensions of the ring are not Nominal Size, they are Actual Size. Please kindly check the mounting hole size of the downlight/spotlight and the size of the ceiling opening before purchasing.
- Goof Rings For Recessed Lights: This trim ring thickness is only 0.04 inches, its overlay sits flush against the ceiling in between the drywall and the recessed light. Also works with ceiling fans and pendant lights. Steel material, durable to use.
- Good Quality Material: The recessed light trim cover is made of carbon steel material which has high strength and rigidity, can withstand greater pressure and load, and its surface hardness can effectively resist friction and wear for a long lifespan.
- Easy To Install: Place the Baffle into the trim ring, the trim ring is held in place by the baffle. Once Baffle is inside of trim ring then position the baffle into the recessed lighting housing and put it into place with springs
- Application: This Trim Ring is a lamp hole replenishment ring, which is mainly used to hide the mounting hole gaps of downlights and spotlights. Using it is equivalent to adding spacers to the LED light. Achieve a seamless ceiling appearance with our white metal trim rings. Designed to cover any wall mounting hole imperfections such as torn drywall, damaged areas, mis-cuts, or oversized holes, these trim rings hiding flaws and give your ceiling a clean and tidy finish.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #15
PATIKIL 3mm Lamp Shade Clips for Ceiling Flush Mount, 15 Pair Fixed Buckle Light Fixture Accessories Plastic White
Asin: B0BNG8CX1B
Instruction: 1. Find The Hole Position Of The Lampshade Base. 2. Insert The Clips Cap Into The Holes Of The Lampshade. 3. Insert The Rotary Buckle. 4. Finally Tighten The Screws To Fix It..
Note: 1. There Will Be A 1-2Mm Error In The Manual Measurement Size, But It Will Not Affect The Installation. 2. Please See The Hole Position Of The Lampshade Before Placing An Order..
Application: Suitable For Led Ceiling Lights, These Ceiling Light Fixing Buckles Can Firmly Fix The Led Light To The Ceiling, Protecting The Ceiling Light From Damage Such As Thermal Expansion..
Advantage: 1. Made Of Durable Plastic, It Is Practical And Has Long-Lasting Use. 2. Light Color Does Not Affect Appearance. 3. The Ceiling Light Clips Are Easy To Install And As The Fixture For The Ceiling Light..
Features
- Color: White; Material: Plastic; Overall Size: 44 x 11 x 14mm/1.73" x 0.43" x 0.55"(L*W*H), 23 x 11 x 13mm/0.91" x 0.43" x 0.51" (L*W*H); Mounting Hole Diameter: 3mm/0.12"; Screw Size: 3 x 10mm/0.12" x 0.39" (Dia*Length); Packing List: 15 Pair x Ceiling Light Buckles, 15 Pcs x Screws
- Advantage: 1. Made of durable plastic, it is practical and has long-lasting use. 2. Light color does not affect appearance. 3. The ceiling light clips are easy to install and as the fixture for the ceiling light.
- Instruction: 1. Find the hole position of the lampshade base. 2. Insert the clips cap into the holes of the lampshade. 3. Insert the rotary buckle. 4. Finally tighten the screws to fix it.
- Application: Suitable for LED ceiling lights, these ceiling light fixing buckles can firmly fix the LED light to the ceiling, protecting the ceiling light from damage such as thermal expansion.
- NOTE: 1. There will be a 1-2mm error in the manual measurement size, but it will not affect the installation. 2. Please see the hole position of the lampshade before placing an order.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #16
PATIKIL 4" Ceiling Light Plate Kit, 6 Pack Light Crossbar Mounting Bracket Universal Lamp Fixture Hardware Set for Chandelier Wall Light, Zinc Plated
Asin: B0BVTGSHWP
Advantages: The Package Comes With All The Needed Accessories For Quick And Easy Installation. The Light Crossbar Is Made Of Carbon Steel After The Zinc Plating Surface Processing, It Is Solid And Durable To Use, Not Easy To Deform, Rust And Break, And Has A Long Service Life..
Note:Please Confirm The Hardware And Accessories In The Kit Before You Order..
Instruction: Connect The Light And Light Crossbar With The Hardware In The Package..
Specification: Material: Carbon Steel (Zinc-Plated); Thickness: 1.2Mm / 0.05"; Total Length: 100Mm / 4"; Mounting Hole Distance: 94Mm / 3.7"; Center Hole Diameter: 11Mm / 0.43"; Lamp Pipe Size: M10x1mm, 40Mm; Mounting Screw Length: 26Mm / 1.02"; Package List: 6 X Light Crossbar, 6 X Lamp Pipes, 6 X Ground Screws, 12 Set X Mounting Screws Parts, 6 X Lock Nuts, 6 X Gaskets.
Features
- The light crossbar kit is used to install the light, which is widely used in crystal lamps, floor lamps, wall lamps, ceiling lamps, LED lamps, pendant lights, bathroom lamps, DIY lighting and more.
- Specification: Material: Carbon Steel (Zinc-plated); Thickness: 1.2mm / 0.05; Total Length: 100mm / 4; Mounting Hole Distance: 94mm / 3.7; Center Hole Diameter: 11mm / 0.43; Lamp Pipe Size: M10x1mm, 40mm; Mounting Screw Length: 26mm / 1.02; Package List: 6 x Light Crossbar, 6 x Lamp Pipes, 6 x Ground Screws, 12 Set x Mounting Screws Parts, 6 x Lock Nuts, 6 x Gaskets
- Advantages: The package comes with all the needed accessories for quick and easy installation. The light crossbar is made of carbon steel after the zinc plating surface processing, it is solid and durable to use, not easy to deform, rust and break, and has a long service life.
- Instruction: Connect the light and light crossbar with the hardware in the package.
- Note:Please confirm the hardware and accessories in the kit before you order.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #17
PATIKIL 4.5mm Lamp Shade Clips for Ceiling Flush Mount, 6 Pair Fixed Buckle Light Fixture Accessories ABS Plastic White
Asin: B0BNF3Z389
Instruction: 1. Find The Hole Position Of The Lampshade Base. 2. Insert The Clips Cap Into The Holes Of The Lampshade. 3. Insert The Rotary Buckle. 4. Finally Tighten The Screws To Fix It..
Note: 1. There Will Be A 1-2Mm Error In The Manual Measurement Size, But It Will Not Affect The Installation. 2. Please See The Hole Position Of The Lampshade Before Placing An Order..
Application: Suitable For Led Ceiling Lights, These Ceiling Light Fixing Buckles Can Firmly Fix The Led Light To The Ceiling, Protecting The Ceiling Light From Damage Such As Thermal Expansion..
Advantage: 1. Made Of Abs Plastic, Practical And Durable, Long-Lasting Use. 2. Light Color Does Not Affect Appearance. 3. The Ceiling Light Clips Are Easy To Install And As The Fixture For The Ceiling Light..
Features
- Color: White; Material: ABS Plastic; Overall Size: 48 x 17 x 16mm/1.89" x 0.67" x 0.63"(L*W*H), 34 x 16 x 15mm/1.34" x 0.63" x 0.59" (L*W*H); Mounting Hole Diameter: 4.5mm/0.18"; Screw Size: 4 x 10mm/0.16" x 0.39" (Dia*Length); Packing List: 6 Pair x Ceiling Light Buckles, 6 Pcs x Screws
- Advantage: 1. Made of ABS plastic, practical and durable, long-lasting use. 2. Light color does not affect appearance. 3. The ceiling light clips are easy to install and as the fixture for the ceiling light.
- Instruction: 1. Find the hole position of the lampshade base. 2. Insert the clips cap into the holes of the lampshade. 3. Insert the rotary buckle. 4. Finally tighten the screws to fix it.
- Application: Suitable for LED ceiling lights, these ceiling light fixing buckles can firmly fix the LED light to the ceiling, protecting the ceiling light from damage such as thermal expansion.
- NOTE: 1. There will be a 1-2mm error in the manual measurement size, but it will not affect the installation. 2. Please see the hole position of the lampshade before placing an order.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #18
PATIKIL 125mm (4.92") Universal Light Fixture Mounting Bracket Kit, 4set Light Crossbar Round Ceiling Plate for Wall Light, Close to Ceiling Light, Chandelier
Asin: B0CT2JWNPS
Instruction: Convenient To Install, Screw This Plate Into Your Round Ceiling Light Base..
Note: You Might Need To Check The Length Of This Plate If It Can Be Installed In Your Round Ceiling Light Base..
Application: This Ceiling Light Plate Usually Mounted On The Ceiling Floor And It Is Used For Hanging A Chandelier Or Pendant Light. Extremely Suitable To Use At Places Like Home, Office, Bookstore, Or Other Places..
Advantages: Carbon Steel Material With Zinc Plating On The Surface, The Zinc Coating Provides Good Rust Resistance And Is Durable To Use. There Are Screws And Nuts Included In The Package, Which Can Save You Time And Effort..
Features
- Color: Silver; Material: Galvanized Carbon Steel; Inner Dia.: 47mm / 1.85 inch; Thickness: 1.5mm / 0.06 inch; Overall Size: 125x16mm / 4.92x0.63 inch (L*H); Packing List: 4 x Ceiling Light Plate (Screws, Wiring Nuts, Ground Screws Included)
- Advantages: Carbon steel material with zinc plating on the surface, the zinc coating provides good rust resistance and is durable to use. There are screws and nuts included in the package, which can save you time and effort.
- Instruction: Convenient to install, screw this plate into your round ceiling light base.
- Application: This ceiling light plate usually mounted on the ceiling floor and it is used for hanging a chandelier or pendant light. Extremely suitable to use at places like home, office, bookstore, or other places.
- NOTE: You might need to check the length of this plate if it can be installed in your round ceiling light base.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon #19
PATIKIL Goof Rings for 6-8" Inch Recessed Can Lighting Down Light, 4 Pcs Metal Goof Trim Rings Cover, Outer Diameter 8.62-inch, Inner Diameter 6.25-inch, Matte Finish White Flush Mount
Asin: B0CF9YFKB1
Good Quality Material: The Recessed Light Trim Cover Is Made Of Carbon Steel Material Which Has High Strength And Rigidity, Can Withstand Greater Pressure And Load, And Its Surface Hardness Can Effectively Resist Friction And Wear For A Long Lifespan..
Application: This Trim Ring Is A Lamp Hole Replenishment Ring, Which Is Mainly Used To Hide The Mounting Hole Gaps Of Downlights And Spotlights. Using It Is Equivalent To Adding Spacers To The Led Light. Achieve A Seamless Ceiling Appearance With Our White Metal Trim Rings. Designed To Cover Any Wall Mounting Hole Imperfections Such As Torn Drywall, Damaged Areas, Mis-Cuts, Or Oversized Holes, These Trim Rings Hiding Flaws And Give Your Ceiling A Clean And Tidy Finish..
Easy To Install: Place The Baffle Into The Trim Ring, The Trim Ring Is Held In Place By The Baffle. Once Baffle Is Inside Of Trim Ring Then Position The Baffle Into The Recessed Lighting Housing And Put It Into Place With Springs.
Goof Rings For Recessed Lights: This Trim Ring Thickness Is Only 0.04 Inches, Its Overlay Sits Flush Against The Ceiling In Between The Drywall And The Recessed Light. Also Works With Ceiling Fans And Pendant Lights. Steel Material, Durable To Use..
Features
- Size: The goof rings for recessed lights come in 4 packs, Color: Matte Finish White; Material: Steel, which measure 8.62 x 6.25 x 0.04inches/218 x 160 x 1mm(Outer Diameter*Inner Diameter*Thickness). NOTE: The dimensions of the ring are not Nominal Size, they are Actual Size. Please kindly check the mounting hole size of the downlight/spotlight and the size of the ceiling opening before purchasing.
- Goof Rings For Recessed Lights: This trim ring thickness is only 0.04 inches, its overlay sits flush against the ceiling in between the drywall and the recessed light. Also works with ceiling fans and pendant lights. Steel material, durable to use.
- Good Quality Material: The recessed light trim cover is made of carbon steel material which has high strength and rigidity, can withstand greater pressure and load, and its surface hardness can effectively resist friction and wear for a long lifespan.
- Easy To Install: Place the Baffle into the trim ring, the trim ring is held in place by the baffle. Once Baffle is inside of trim ring then position the baffle into the recessed lighting housing and put it into place with springs
- Application: This Trim Ring is a lamp hole replenishment ring, which is mainly used to hide the mounting hole gaps of downlights and spotlights. Using it is equivalent to adding spacers to the LED light. Achieve a seamless ceiling appearance with our white metal trim rings. Designed to cover any wall mounting hole imperfections such as torn drywall, damaged areas, mis-cuts, or oversized holes, these trim rings hiding flaws and give your ceiling a clean and tidy finish.
- See more on Amazon...
Brand: PATIKIL | Manufacturer: PATIKIL
See On Amazon
Looking For Something Else?
Search