HARFINGTON 20pcs Wire Threaded Inserts 5/16-24 UNF 1.5D 11.85mm 304 Stainless Steel Helical Coiled Wire Thread Sleeve
Asin: B0BSC26DMK | Model: hta221114hh0732 | PartNumber: hta221114hh0732
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Features - Designed With A Certain Of Elastic, And Provides An Even Load. Wire Thread Inserts Have Self-Tapping Capability Without Pre-Tapping The Base Metal. Large Contact Surface With Finished Products, Strong Tensile Force. Strong Resistance To Vibration, No Deformation..
Note - When The Installation Amount Is Small, Take The Corresponding Bolts + Nuts, Fix The Thread Insert On The Screw And Fix It With The Same Type Of Nut To Make The Three In One. Use A Wrench To Screw The Threaded Insert Into The Bottom Hole And Remove The Screw..
Applications - Mainly Used For Various Low-Strength Metal And Non-Metal Materials, Such As Aluminum, Magnesium, Cast Iron, Plastic, Rubber, Mdf, Ceramics, Fiberglass, Wood. Improve The Strength And Wear Resistance Of Threaded Connections, Prevent Thread Loosening And Slippage.
Material - 304 Stainless Steel Has Good Corrosion Resistance, Rust Prevention, High Hardness, And Excellent Oxidation Resistance. It Is Austenitic Stainless Steel, Which Is Non-Magnetic Or Slightly Magnetic..
Features
- Size - Thread size: 5/16-24 UNF; effective length (after Installation): 1.5D = 11.85mm / 0.47"; free state length: 9mm / 0.35"; free state outer diameter: 9.5mm / 0.37"; type: helical; surface treatment: white washing.
- Material - 304 stainless steel has good corrosion resistance, rust prevention, high hardness, and excellent oxidation resistance. It is austenitic stainless steel, which is non-magnetic or slightly magnetic.
- Features - Designed with a certain of elastic, and provides an even load. Wire thread inserts have self-tapping capability without pre-tapping the base metal. Large contact surface with finished products, strong tensile force. Strong resistance to vibration, no deformation.
- Applications - Mainly used for various low-strength metal and non-metal materials, such as aluminum, magnesium, cast iron, plastic, rubber, MDF, ceramics, fiberglass, wood. Improve the strength and wear resistance of threaded connections, prevent thread loosening and slippage
- Note - When the installation amount is small, take the corresponding bolts + nuts, fix the thread insert on the screw and fix it with the same type of nut to make the three in one. Use a wrench to screw the threaded insert into the bottom hole and remove the screw.
- See more on Amazon...
Brand: HARFINGTON | Manufacturer: HARFINGTON
See On Amazon Similar To HARFINGTON 20pcs Wire Threaded Inserts
#1
E-Z LOK Knife Threaded Insert for Hard-Wood, Stainless Steel Thread Inserts 1/4-20 Internal Threads, 0.625" Length(Pack of 10)
Asin: B002WC8TSE | Model: 400-4-CR | PartNumber: 400-4-CR | Ean: 0839137005127 | UPC: 839137005127
Brass Or Steel Options – Brass Threaded Inserts Or Stainless Steel Threaded Inserts Available. Stainless Steel Is Recommended For Particularly Hard Wood And Anywhere Corrosion Resistance Is Needed..
Strong Threads Made Easy – Easily Installs With A Screwdriver, Bolt/Jam Nut, Or An Optional E-Z Lok Drive Tool..
For Use With Applications – The E-Z Knife Threaded Inserts For Wood Are Designed For Use In Hard Woods Such As Oak, Cherry, And Maple..
Proprietary Knife Thread – E-Z Knife Thread Inserts Provide Superior Holding Power Using A Proprietary External “Knife” Thread To Slice Into The Wood..
Features
- THREADED INSERTS FOR WOOD E-Z LOK Thread Inserts for hard-wood are ideal for applications where stripping or thread erosion is possible. Perfect for furniture, cabinets, displays, and more.
- PROPRIETARY KNIFE THREAD E-Z Knife thread inserts provide superior holding power using a proprietary external knife thread to slice into the wood.
- BRASS OR STEEL OPTIONS Brass threaded inserts or stainless steel threaded inserts available. Stainless steel is recommended for particularly hard wood and anywhere corrosion resistance is needed.
- FOR USE WITH APPLICATIONS The E-Z Knife threaded inserts for wood are designed for use in hard woods such as oak, cherry, and maple.
- STRONG THREADS MADE EASY Easily installs with a screwdriver, bolt/jam nut, or an optional E-Z LOK drive tool.
- See more on Amazon...
Brand: E-Z LOK | Manufacturer: E-Z LOK
Dimensions: 0.00 x 0.63 x 0.00 Inches | Weight: 0.01 Pounds
See On Amazon #2
E-Z LOK Threaded Insert for Plastic Tapered Single Vane Brass Thread Inserts 1/4-20 Pack of 50
Asin: B08PVQX853 | Model: TH-420-SV | PartNumber: TH-420-SV | Ean: 0839137005738 | UPC: 839137005738
For Use With Applications – The Threaded Inserts For Plastic Are Designed For Putting Standard Machine Threads In 3D Printed And Thermoplastic Parts..
Strong Threads Made Easy – High-Quality Brass Threaded Inserts Are Available With Both Inch And Metric Threads..
Available Styles – Tapered E-Z Sonic Inserts Are Available In Single Or Double Vane Configurations To Meet Your Material Thickness Requirements..
Easy Installation – Install These Metal Threaded Inserts Ultrasonically Or With A Heat Driver. The Tapered Design Simplifies Installation..
Features
- THREADED INSERTS FOR PLASTIC E-Z Sonic ultrasonic thread inserts for plastic are designed for post-molding installation in thermoplastic materials.
- EASY INSTALLATION Install these metal threaded inserts ultrasonically or with a heat driver. The tapered design simplifies installation.
- FOR USE WITH APPLICATIONS The threaded inserts for plastic are designed for putting standard machine threads in 3D printed and thermoplastic parts.
- AVAILABLE STYLES Tapered E-Z Sonic inserts are available in single or double vane configurations to meet your material thickness requirements.
- STRONG THREADS MADE EASY High-quality brass threaded inserts are available with both inch and metric threads.
- See more on Amazon...
Brand: E-Z LOK | Manufacturer: E-Z LOK
Dimensions: 1.00 x 4.00 x 4.00 Inches | Weight: 0.26 pounds
See On Amazon #3
QWORK Stainless Steel Threaded Insert for Hard-Wood, 1/4-20 Internal Threads 20 Pack 5/8" Long Nut Inserts for Hardwoods, Softwoods, Plywood and Composites
Asin: B0B6J1YQRV | Model: WD8336 | PartNumber: WD8336 | Ean: 0795973807601 | UPC: 795973807601
Easy To Use: Easy Installation Using A Screwdriver, Bolt/Lock Nut Or Dedicated Drive Insertion Tool. For Added Pullout Strength, Install The Insert 1/4" Below The Surface, Making Strong Threads Simple..
Package Includes: Contains 20 Pcs American Standard Thread Inserts, Id 1/4-20..
Widely Used: Designed To Be Installed In Hardwood Or Softwood, Plywood Or Composite And Will Receive Machine Screws Or Attachment Bolts. They Are Ideal For Modular Furniture..
Knife Thread: Cuts Into Wood With A Proprietary External Knife Thread That Provides Superior Retention, More Accurate And Professional..
Features
- Durable: Made of stainless steel high-quality material, strong, durable, corrosion-resistant and can be used for a long time.
- Knife Thread: Cuts into wood with a proprietary external knife thread that provides superior retention, more accurate and professional.
- Easy to use: Easy installation using a screwdriver, bolt/lock nut or dedicated drive insertion tool. For added pullout strength, install the insert 1/4 below the surface, making strong threads simple.
- Widely used: Designed to be installed in hardwood or softwood, plywood or composite and will receive machine screws or attachment bolts. They are ideal for modular furniture.
- Package includes: Contains 20 Pcs American Standard thread inserts, ID 1/4-20.
- See more on Amazon...
Brand: QWORK | Manufacturer: QWORK
See On Amazon #4
1/4-20 Threaded Inserts, Wood Inserts, Steel Threaded Inserts for Wood Furniture Screw, HELIFOUNER 145 Pieces 1/4"-20 x 10mm/15mm/20mm/25mm Threaded Inserts Kit with Hex Wrench
Asin: B0BGXP61KH | Model: HELIFOUNER-Nut-Inserts | PartNumber: HELIFOUNER-Nut-Inserts | Ean: 0749355454532 | UPC: 749355454532
【Easy To Install】You Can Drill A Hole By Using A 3/8" Drill Bit, Ensure A Precise 90 Degree Angle For Inserting The Threaded Inserts, Then You Need To Screw The Inserts Into The 3/8" Holes By Using Our Hex Wrench. Make Sure You Countersink The Hole To Head Size Before You Insert The Threaded Sleeve, Fit Standard 1/4 20 Screws Bolts Perfectly..
【Wide Applications】You Can Use Our Threaded Inserts To Repair File Cabinets And Chair Leg, You Can Also Use Them On Head Board And Foot Board Of Wood Furniture. Widely Used For Soft Woods Of Pine, Plywood, Fiberboard, Etc, Work Perfectly On The Furniture Combination, You Just Need To Drill A Hole That The Size Of The Body Into The Wood For The Threaded Inserts..
【Threaded Inserts Assortment Kit】Total 145 Pieces 4 Sizes 1/4-20 Threaded Inserts Are Packed In A Durable Transparent Box With Label For You. It Is Easy To Distinguish The Size Of The Product, You Can Choose The Suitable One To Use In Your Wood Furniture. Our Threaded Inserts Have Standard Internal Hex Socket, Without Burr, Smooth, Non-Slip..
【Blue Zinc Plated Steel】Made Of High Quality Carbon Steel, Blue Zinc Plated On The Surface Which Have Good Corrosion Resistance In Bad Environment Like High Temperature, High Hardness And Perfect Wear Resistance, Standard Internal Hex Socket, Without Burr, Smooth, Non-Slip, Which Can Ensure Long Time Using..
Features
- Detailed Dimensions 1/4"-20 x 10mm/15mm/20mm/25mm, 4 sizes commonly used threaded inserts in a plastic case, different sizes can satisfy your different needs. Internal thread insert type: 1/4"-20, thread type: 20 threads per inch, coarse thread, fit standard 1/4 20 screws bolts perfectly.
- Blue Zinc Plated Steel Made of high quality carbon steel, blue zinc plated on the surface which have good corrosion resistance in bad environment like high temperature, high hardness and perfect wear resistance, standard internal hex socket, without burr, smooth, non-slip, which can ensure long time using.
- Easy To Install You can drill a hole by using a 3/8 drill bit, ensure a precise 90 degree angle for inserting the threaded inserts, then you need to screw the inserts into the 3/8 holes by using our hex wrench. Make sure you countersink the hole to head size before you insert the threaded sleeve, fit standard 1/4 20 screws bolts perfectly.
- Threaded Inserts Assortment Kit Total 145 pieces 4 sizes 1/4-20 threaded inserts are packed in a durable transparent box with label for you. It is easy to distinguish the size of the product, you can choose the suitable one to use in your wood furniture. Our threaded inserts have standard internal hex socket, without burr, smooth, non-slip.
- Wide Applications You can use our threaded inserts to repair file cabinets and chair leg, you can also use them on head board and foot board of wood furniture. Widely used for soft woods of pine, plywood, fiberboard, etc, work perfectly on the furniture combination, you just need to drill a hole that the size of the body into the wood for the threaded inserts.
- See more on Amazon...
Brand: HELIFOUNER | Manufacturer: HELIFOUNER
See On Amazon #5
E-Z LOK Threaded Insert for Plastic Flush Brass Thread Inserts 1/4-20 Pack of 25
Asin: B08QJHCMYF | Model: 240-4-BR | PartNumber: 240-4-BR | Ean: 0839137005301 | UPC: 839137005301
For Use With Applications – The Threaded Inserts For Plastic Are Designed For Post-Molding Installation In Either Thermoset Plastics, Thermoplastics, Or 3D Printed Parts..
Strong Threads Made Easy – All Three Types Of Thread Inserts Press Into Place For Fast, Easy Installation..
Available In 3 Styles – Available In Flush Threaded Inserts, Flanged Threaded Inserts, And Reverse Slot Threaded Inserts..
Easy Installation – A Slotted Design Allows For Cold Installation Of These Metal Threaded Inserts With No Heating Required, Eliminating The Need To Chase Threads After Molding..
Features
- THREADED INSERTS FOR PLASTIC E-Z LOK Thread Inserts for plastic. Available in brass threaded inserts and stainless steel threaded inserts. Install cold.
- EASY INSTALLATION A slotted design allows for cold installation of these metal threaded inserts with no heating required, eliminating the need to chase threads after molding.
- FOR USE WITH APPLICATIONS The threaded inserts for plastic are designed for post-molding installation in either thermoset plastics, thermoplastics, or 3D printed parts.
- AVAILABLE IN 3 STYLES Available in flush threaded inserts, flanged threaded inserts, and reverse slot threaded inserts.
- STRONG THREADS MADE EASY All three types of thread inserts press into place for fast, easy installation.
- See more on Amazon...
Brand: E-Z LOK | Manufacturer: E-Z LOK
Dimensions: 0.32 x 0.50 x 0.32 inches | Weight: 0.01 pounds
See On Amazon #6
cSeao 20pcs 1/4-20" x6 x 8mm Brass Knurled Threaded Nuts, Heat Set Nutserts, Female Thread Brass Embedment Nuts for Plastic 3D Printers
Asin: B094H2269W | Model: CS285 | PartNumber: CS285 | Ean: 0733424954856 | UPC: 733424954856
【🌂】Coarse Thread: 1/4; - Color: Bronze Tone; - Material: Brass;.
【🌂】Used For: Laptop Plastic Case, Desktop Computer Plastic Case, Gps Plastic Case, Router Plastic Case, Cell Phone Plastic Case, Unlimited Communication Facilities Plastic Case, Home Appliance Plastic Case, Automobile, Electrical, Medical, Electronic And Other Plastic Case..
【🌂】Product Name: 1/4-20 Threaded Laptop 3D Printer Inserts Nuts;.
Features
- Package: 20pcs 1/4-20 Brass Threaded Heat Set Inserts for Plastic;
- Product name: 1/4-20 Threaded Laptop 3D Printer Inserts Nuts;
- Coarse Thread: 1/4; - Color: Bronze Tone; - Material: Brass;
- Used for: Laptop plastic case, desktop computer plastic case, GPS plastic case, router plastic case, cell phone plastic case, unlimited communication facilities plastic case, home appliance plastic case, automobile, electrical, medical, electronic and other plastic case.
- See more on Amazon...
Brand: cSeao | Manufacturer: cSeao
Warranty: Refund or return if defect.
See On Amazon #7
HARFINGTON 20pcs Wire Threaded Inserts 7/16-14 UNC 2D 22.2mm 304 Stainless Steel Helical Coiled Wire Thread Sleeve
Asin: B0BSC4QKVC | Model: hta221114hh0719 | PartNumber: hta221114hh0719
Features - Designed With A Certain Of Elastic, And Provides An Even Load. Wire Thread Inserts Have Self-Tapping Capability Without Pre-Tapping The Base Metal. Large Contact Surface With Finished Products, Strong Tensile Force. Strong Resistance To Vibration, No Deformation..
Note - When The Installation Amount Is Small, Take The Corresponding Bolts + Nuts, Fix The Thread Insert On The Screw And Fix It With The Same Type Of Nut To Make The Three In One. Use A Wrench To Screw The Threaded Insert Into The Bottom Hole And Remove The Screw..
Applications - Mainly Used For Various Low-Strength Metal And Non-Metal Materials, Such As Aluminum, Magnesium, Cast Iron, Plastic, Rubber, Mdf, Ceramics, Fiberglass, Wood. Improve The Strength And Wear Resistance Of Threaded Connections, Prevent Thread Loosening And Slippage.
Material - 304 Stainless Steel Has Good Corrosion Resistance, Rust Prevention, High Hardness, And Excellent Oxidation Resistance. It Is Austenitic Stainless Steel, Which Is Non-Magnetic Or Slightly Magnetic..
Features
- Size - Thread size: 7/16-14 UNC; effective length (after Installation): 2D = 22.2mm / 0.87"; free state length: 19mm / 0.75"; free state outer diameter: 13.6mm / 0.54"; type: helical; surface treatment: white washing.
- Material - 304 stainless steel has good corrosion resistance, rust prevention, high hardness, and excellent oxidation resistance. It is austenitic stainless steel, which is non-magnetic or slightly magnetic.
- Features - Designed with a certain of elastic, and provides an even load. Wire thread inserts have self-tapping capability without pre-tapping the base metal. Large contact surface with finished products, strong tensile force. Strong resistance to vibration, no deformation.
- Applications - Mainly used for various low-strength metal and non-metal materials, such as aluminum, magnesium, cast iron, plastic, rubber, MDF, ceramics, fiberglass, wood. Improve the strength and wear resistance of threaded connections, prevent thread loosening and slippage
- Note - When the installation amount is small, take the corresponding bolts + nuts, fix the thread insert on the screw and fix it with the same type of nut to make the three in one. Use a wrench to screw the threaded insert into the bottom hole and remove the screw.
- See more on Amazon...
Brand: HARFINGTON | Manufacturer: HARFINGTON
See On Amazon #8
HARFINGTON 20pcs Wire Thread Inserts M4 x 0.7 2D 304 Stainless Steel Helical Coiled Wire Threaded Sleeve
Asin: B0BFR8YJF8 | Model: hta220809hh0160 | PartNumber: hta220809hh0160
Features - Designed With A Certain Of Elastic, And Provides An Even Load. Wire Thread Inserts Have Self-Tapping Capability Without Pre-Tapping The Base Metal. Large Contact Surface With Finished Products, Strong Tensile Force. Strong Resistance To Vibration, No Deformation..
Note - When The Installation Amount Is Small, Take The Corresponding Bolts + Nuts, Fix The Thread Insert On The Screw And Fix It With The Same Type Of Nut To Make The Three In One. Use A Wrench To Screw The Threaded Insert Into The Bottom Hole And Remove The Screw..
Applications - Mainly Used For Various Low-Strength Metal And Non-Metal Materials, Such As Aluminum, Magnesium, Cast Iron, Plastic, Rubber, Mdf, Ceramics, Fiberglass, Wood. Improve The Strength And Wear Resistance Of Threaded Connections, Prevent Thread Loosening And Slippage.
Material - 304 Stainless Steel Has Good Corrosion Resistance, Rust Prevention, High Hardness, And Excellent Oxidation Resistance. It Is Austenitic Stainless Steel, Which Is Non-Magnetic Or Slightly Magnetic..
Features
- Size - Thread Size: M4 x 0.7; Effective Length (after Installation): 2D=8mm; Type: Helical
- Material - 304 stainless steel has good corrosion resistance, rust prevention, high hardness, and excellent oxidation resistance. It is austenitic stainless steel, which is non-magnetic or slightly magnetic.
- Features - Designed with a certain of elastic, and provides an even load. Wire thread inserts have self-tapping capability without pre-tapping the base metal. Large contact surface with finished products, strong tensile force. Strong resistance to vibration, no deformation.
- Applications - Mainly used for various low-strength metal and non-metal materials, such as aluminum, magnesium, cast iron, plastic, rubber, MDF, ceramics, fiberglass, wood. Improve the strength and wear resistance of threaded connections, prevent thread loosening and slippage
- Note - When the installation amount is small, take the corresponding bolts + nuts, fix the thread insert on the screw and fix it with the same type of nut to make the three in one. Use a wrench to screw the threaded insert into the bottom hole and remove the screw.
- See more on Amazon...
Brand: HARFINGTON | Manufacturer: HARFINGTON
See On Amazon #9
HARFINGTON 20pcs Wire Thread Inserts M14 x 2 1D 304 Stainless Steel Helical Coiled Wire Threaded Sleeve
Asin: B0BFR9NGZ7 | Model: hta220809hh0216 | PartNumber: hta220809hh0216
Features - Designed With A Certain Of Elastic, And Provides An Even Load. Wire Thread Inserts Have Self-Tapping Capability Without Pre-Tapping The Base Metal. Large Contact Surface With Finished Products, Strong Tensile Force. Strong Resistance To Vibration, No Deformation..
Note - When The Installation Amount Is Small, Take The Corresponding Bolts + Nuts, Fix The Thread Insert On The Screw And Fix It With The Same Type Of Nut To Make The Three In One. Use A Wrench To Screw The Threaded Insert Into The Bottom Hole And Remove The Screw..
Applications - Mainly Used For Various Low-Strength Metal And Non-Metal Materials, Such As Aluminum, Magnesium, Cast Iron, Plastic, Rubber, Mdf, Ceramics, Fiberglass, Wood. Improve The Strength And Wear Resistance Of Threaded Connections, Prevent Thread Loosening And Slippage.
Material - 304 Stainless Steel Has Good Corrosion Resistance, Rust Prevention, High Hardness, And Excellent Oxidation Resistance. It Is Austenitic Stainless Steel, Which Is Non-Magnetic Or Slightly Magnetic..
Features
- Size - Thread Size: M14 x 2; Effective Length (after Installation): 1D=14mm; Type: Helical
- Material - 304 stainless steel has good corrosion resistance, rust prevention, high hardness, and excellent oxidation resistance. It is austenitic stainless steel, which is non-magnetic or slightly magnetic.
- Features - Designed with a certain of elastic, and provides an even load. Wire thread inserts have self-tapping capability without pre-tapping the base metal. Large contact surface with finished products, strong tensile force. Strong resistance to vibration, no deformation.
- Applications - Mainly used for various low-strength metal and non-metal materials, such as aluminum, magnesium, cast iron, plastic, rubber, MDF, ceramics, fiberglass, wood. Improve the strength and wear resistance of threaded connections, prevent thread loosening and slippage
- Note - When the installation amount is small, take the corresponding bolts + nuts, fix the thread insert on the screw and fix it with the same type of nut to make the three in one. Use a wrench to screw the threaded insert into the bottom hole and remove the screw.
- See more on Amazon...
Brand: HARFINGTON | Manufacturer: HARFINGTON
See On Amazon #10
1/4 Inch Knurled Insert Nut DGZZI 15PCS 1/4-20 6mm (H) x 8mm (OD) Brass Female Knurled Thru-Threaded Insert Embedment Nuts for Printing 3D Printer and More Projects, Thread Brass Knurled Nuts
Asin: B0C8NBCL5J
Size: 1/4-20;H: 6Mm/0.23Inch; Outer Diameter: 8Mm/0.31Inch.
Package Includes: 15Pcs Knurled Threaded Insert Nuts..
Wide Range Of Applications: The Product Can Be Widely Used In Injection Molding For Tight Fixation. It Can Be Installed Into A Threaded Cone Hole By Ultrasonic Or Heating, Or Molded During Injection. It Is Also Suitable For Circuit Board Assembly And Electronics. The Plastic Forms Around The Brass Insert. It Is Better To Put Something In The Thread To Prevent The Plastic From Melting To The Center..
These Internal Brass Knurled Thread Inserts Are Embedded In The Nut Thread Deep, Neat And Clean, Not Easy To Peel Off When Rotating, Stable And Reliable. Easy To Operate And Good Texture, Can Greatly Improve Your Work Efficiency.
Features
- Product material: brass, well-made, high strength, wear and corrosion resistance, beautiful and practical
- These internal brass knurled thread inserts are embedded in the nut thread deep, neat and clean, not easy to peel off when rotating, stable and reliable. Easy to operate and good texture, can greatly improve your work efficiency
- Size: 1/4-20;H: 6mm/0.23inch; Outer diameter: 8mm/0.31inch
- Wide range of applications: The product can be widely used in injection molding for tight fixation. It can be installed into a threaded cone hole by ultrasonic or heating, or molded during injection. It is also suitable for circuit board assembly and electronics. The plastic forms around the brass insert. It is better to put something in the thread to prevent the plastic from melting to the center.
- Package includes: 15PCS knurled threaded insert nuts.
- See more on Amazon...
Brand: DGZZI | Manufacturer: DGZZI
See On Amazon #11
HARFINGTON 30pcs Wire Threaded Inserts 1/4-20 UNC 1D 6.35mm 304 Stainless Steel Helical Coiled Wire Thread Sleeve
Asin: B0BSC3QWRX | Model: hta221114hh0759 | PartNumber: hta221114hh0759
Features - Designed With A Certain Of Elastic, And Provides An Even Load. Wire Thread Inserts Have Self-Tapping Capability Without Pre-Tapping The Base Metal. Large Contact Surface With Finished Products, Strong Tensile Force. Strong Resistance To Vibration, No Deformation..
Note - When The Installation Amount Is Small, Take The Corresponding Bolts + Nuts, Fix The Thread Insert On The Screw And Fix It With The Same Type Of Nut To Make The Three In One. Use A Wrench To Screw The Threaded Insert Into The Bottom Hole And Remove The Screw..
Applications - Mainly Used For Various Low-Strength Metal And Non-Metal Materials, Such As Aluminum, Magnesium, Cast Iron, Plastic, Rubber, Mdf, Ceramics, Fiberglass, Wood. Improve The Strength And Wear Resistance Of Threaded Connections, Prevent Thread Loosening And Slippage.
Material - 304 Stainless Steel Has Good Corrosion Resistance, Rust Prevention, High Hardness, And Excellent Oxidation Resistance. It Is Austenitic Stainless Steel, Which Is Non-Magnetic Or Slightly Magnetic..
Features
- Size - Thread size: 1/4-20 UNC; effective length (after Installation): 1D = 6.35mm / 0.25"; free state length: 6mm / 0.24"; free state outer diameter: 7.9mm / 0.31"; type: helical; surface treatment: white washing.
- Material - 304 stainless steel has good corrosion resistance, rust prevention, high hardness, and excellent oxidation resistance. It is austenitic stainless steel, which is non-magnetic or slightly magnetic.
- Features - Designed with a certain of elastic, and provides an even load. Wire thread inserts have self-tapping capability without pre-tapping the base metal. Large contact surface with finished products, strong tensile force. Strong resistance to vibration, no deformation.
- Applications - Mainly used for various low-strength metal and non-metal materials, such as aluminum, magnesium, cast iron, plastic, rubber, MDF, ceramics, fiberglass, wood. Improve the strength and wear resistance of threaded connections, prevent thread loosening and slippage
- Note - When the installation amount is small, take the corresponding bolts + nuts, fix the thread insert on the screw and fix it with the same type of nut to make the three in one. Use a wrench to screw the threaded insert into the bottom hole and remove the screw.
- See more on Amazon...
Brand: HARFINGTON | Manufacturer: HARFINGTON
See On Amazon #12
HHIP 1011-0251 1/4-20 Wire Thread Inserts
Asin: B08BXN94WH | Model: 1011-0251 | PartNumber: 1011-0251 | Ean: 0769053104270 | UPC: 769053104270
Insert Length Is 1.5" X Diameter.
Helical Inserts Have A Wired Coil Design.
Thread Repair Inserts Are Used To Fix A Stripped Bolt Or Screw Thread Or To Install A Strong, Permanent Threaded Hole In Metals, Composites, Wood Or Other Materials.
Perfect For Renewing Threads.
Features
- Made of stainless steel
- Perfect for renewing threads
- Insert length is 1.5 X diameter
- Thread repair inserts are used to fix a stripped bolt or screw thread or to install a strong, permanent threaded hole in metals, composites, wood or other materials
- Helical inserts have a wired coil design
- See more on Amazon...
Brand: HHIP | Manufacturer: HHIP
Dimensions: 1.00 x 3.00 x 3.00 Inches
See On Amazon #13
HARFINGTON 30pcs Wire Threaded Inserts 1/4-20 UNC 3D 19.05mm 304 Stainless Steel Helical Coiled Wire Thread Sleeve
Asin: B0BSC2BWWF | Model: hta221114hh0761 | PartNumber: hta221114hh0761
Features - Designed With A Certain Of Elastic, And Provides An Even Load. Wire Thread Inserts Have Self-Tapping Capability Without Pre-Tapping The Base Metal. Large Contact Surface With Finished Products, Strong Tensile Force. Strong Resistance To Vibration, No Deformation..
Note - When The Installation Amount Is Small, Take The Corresponding Bolts + Nuts, Fix The Thread Insert On The Screw And Fix It With The Same Type Of Nut To Make The Three In One. Use A Wrench To Screw The Threaded Insert Into The Bottom Hole And Remove The Screw..
Applications - Mainly Used For Various Low-Strength Metal And Non-Metal Materials, Such As Aluminum, Magnesium, Cast Iron, Plastic, Rubber, Mdf, Ceramics, Fiberglass, Wood. Improve The Strength And Wear Resistance Of Threaded Connections, Prevent Thread Loosening And Slippage.
Material - 304 Stainless Steel Has Good Corrosion Resistance, Rust Prevention, High Hardness, And Excellent Oxidation Resistance. It Is Austenitic Stainless Steel, Which Is Non-Magnetic Or Slightly Magnetic..
Features
- Size - Thread size: 1/4-20 UNC; effective length (after Installation): 3D = 19.05mm / 0.75"; free state length: 16mm / 0.63"; free state outer diameter: 7.9mm / 0.31"; type: helical; surface treatment: white washing.
- Material - 304 stainless steel has good corrosion resistance, rust prevention, high hardness, and excellent oxidation resistance. It is austenitic stainless steel, which is non-magnetic or slightly magnetic.
- Features - Designed with a certain of elastic, and provides an even load. Wire thread inserts have self-tapping capability without pre-tapping the base metal. Large contact surface with finished products, strong tensile force. Strong resistance to vibration, no deformation.
- Applications - Mainly used for various low-strength metal and non-metal materials, such as aluminum, magnesium, cast iron, plastic, rubber, MDF, ceramics, fiberglass, wood. Improve the strength and wear resistance of threaded connections, prevent thread loosening and slippage
- Note - When the installation amount is small, take the corresponding bolts + nuts, fix the thread insert on the screw and fix it with the same type of nut to make the three in one. Use a wrench to screw the threaded insert into the bottom hole and remove the screw.
- See more on Amazon...
Brand: HARFINGTON | Manufacturer: HARFINGTON
See On Amazon #14
uxcell knurled Insert Nuts - 10Pcs 1/4"-20 Female Thread Brass Threaded Insert Embedment Nut for 3D Printer
Asin: B07LBR4J6B | Model: a18110700ux0577 | PartNumber: a18110700ux0577
[Feature] - It Can Be Installed Into A Plastic Matrix By Ultrasound Or Heat During The Injection Molding Process..
[Application] - Can Be Widely Used In 3D Printing Injection Molding To Achieve Tight Fixation..
[Easy To Install] - The Knurled Insert Nut Has A Guide, So No Countersink Is Required. The Surface Is Smooth, Firm And Even, And Easy To Install..
[Material] - Made Of Brass Material, High Hardness And Durable. Provides Good Mechanical Properties With Increased Corrosion And Heat Resistance.
Features
- [Thread Size] - Thread Diameter: 1/4"-20; Outer Dia: 8mm; Length: 6mm.
- [Material] - Made of brass material, high hardness and durable. Provides good mechanical properties with increased corrosion and heat resistance
- [Feature] - It can be installed into a plastic matrix by ultrasound or heat during the injection molding process.
- [Easy to Install] - The knurled insert nut has a guide, so no countersink is required. The surface is smooth, firm and even, and easy to install.
- [Application] - Can be widely used in 3D printing injection molding to achieve tight fixation.
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
Dimensions: 0.79 x 1.97 x 1.57 Inches
See On Amazon #15
HARFINGTON 30pcs Wire Threaded Inserts 1/4-20 UNC 2D 12.7mm 304 Stainless Steel Helical Coiled Wire Thread Sleeve
Asin: B0BSC3415D
Features - Designed With A Certain Of Elastic, And Provides An Even Load. Wire Thread Inserts Have Self-Tapping Capability Without Pre-Tapping The Base Metal. Large Contact Surface With Finished Products, Strong Tensile Force. Strong Resistance To Vibration, No Deformation..
Note - When The Installation Amount Is Small, Take The Corresponding Bolts + Nuts, Fix The Thread Insert On The Screw And Fix It With The Same Type Of Nut To Make The Three In One. Use A Wrench To Screw The Threaded Insert Into The Bottom Hole And Remove The Screw..
Applications - Mainly Used For Various Low-Strength Metal And Non-Metal Materials, Such As Aluminum, Magnesium, Cast Iron, Plastic, Rubber, Mdf, Ceramics, Fiberglass, Wood. Improve The Strength And Wear Resistance Of Threaded Connections, Prevent Thread Loosening And Slippage.
Material - 304 Stainless Steel Has Good Corrosion Resistance, Rust Prevention, High Hardness, And Excellent Oxidation Resistance. It Is Austenitic Stainless Steel, Which Is Non-Magnetic Or Slightly Magnetic..
Features
- Size - Thread size: 1/4-20 UNC; effective length (after Installation): 2D = 12.7mm / 0.5"; free state length: 11mm / 0.43"; free state outer diameter: 7.9mm / 0.31"; type: helical; surface treatment: white washing.
- Material - 304 stainless steel has good corrosion resistance, rust prevention, high hardness, and excellent oxidation resistance. It is austenitic stainless steel, which is non-magnetic or slightly magnetic.
- Features - Designed with a certain of elastic, and provides an even load. Wire thread inserts have self-tapping capability without pre-tapping the base metal. Large contact surface with finished products, strong tensile force. Strong resistance to vibration, no deformation.
- Applications - Mainly used for various low-strength metal and non-metal materials, such as aluminum, magnesium, cast iron, plastic, rubber, MDF, ceramics, fiberglass, wood. Improve the strength and wear resistance of threaded connections, prevent thread loosening and slippage
- Note - When the installation amount is small, take the corresponding bolts + nuts, fix the thread insert on the screw and fix it with the same type of nut to make the three in one. Use a wrench to screw the threaded insert into the bottom hole and remove the screw.
- See more on Amazon...
Brand: HARFINGTON | Manufacturer: HARFINGTON
See On Amazon #16
50pcs Wire Thread Insert Kit, 304 Stainless Steel NPT UNC 1/4in 20 x 1-3D Screws Sleeve Assortment Helical Type Coiled for Automotive Repairs(1.5D)
Asin: B0BXT5632P
Enhanced Thread Durability - By Securely Fastening Into The Threaded Hole Of Connected Parts, Our Inserts Create A Standard Internal Thread, Reducing Uneven Forces On Thread Teeth. This Resilience Against Shock And Vibration Enhances Thread Fatigue Strength, Extending Thread Life For Prolonged Reliability..
Product Details - Each Package Includes 50Pcs Of Steel Wire Screws, Model Npt Unc 1/4In-20 X 1.5D, Offering Ample Quantity And Quality To Meet Your Work Needs Effectively..
Stainless Steel Construction - Crafted From High-Strength Sus304 Stainless Steel, The Thread Repair Socket And Screw Bushing Inserts Offer Durability And Resilience, Maintaining Thread Integrity Even Under Heavy Loads..
Versatile Protection Solution - Designed To Safeguard Inserts Of Non-Ferrous Metal Threaded Holes, These Inserts Find Applications Across Various Industries Including Transportation, Manufacturing, And Textiles. Ideal For Use In Ships, Automobiles, Lathes, Clicks, Textiles, And Instrument Manufacturing..
Features
- Stainless Steel Construction - Crafted from durable 304 stainless steel, our threaded sleeve inserts boast high hardness and exceptional wear resistance, ensuring long-lasting and reliable performance, rigorously tested for quality assurance.
- Versatile Protection Solution - Designed to safeguard inserts of non-ferrous metal threaded holes, these inserts find applications across various industries including transportation, manufacturing, and textiles. Ideal for use in ships, automobiles, lathes, clicks, textiles, and instrument manufacturing.
- Enhanced Thread Durability - By securely fastening into the threaded hole of connected parts, our inserts create a standard internal thread, reducing uneven forces on thread teeth. This resilience against shock and vibration enhances thread fatigue strength, extending thread life for prolonged reliability.
- Stainless Steel Construction - Crafted from high-strength SUS304 stainless steel, the thread repair socket and screw bushing inserts offer durability and resilience, maintaining thread integrity even under heavy loads.
- Product Details - Each package includes 50pcs of steel wire screws, model NPT UNC 1/4in-20 x 1.5D, offering ample quantity and quality to meet your work needs effectively.
- See more on Amazon...
Brand: BORDSTRACT | Manufacturer: BORDSTRACT
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.07 pounds
See On Amazon #17
HARFINGTON 20pcs Wire Threaded Inserts 7/16-14 UNC 3D 33.3mm 304 Stainless Steel Helical Coiled Wire Thread Sleeve
Asin: B0BSC3T8Z8 | Model: hta221114hh0720 | PartNumber: hta221114hh0720
Features - Designed With A Certain Of Elastic, And Provides An Even Load. Wire Thread Inserts Have Self-Tapping Capability Without Pre-Tapping The Base Metal. Large Contact Surface With Finished Products, Strong Tensile Force. Strong Resistance To Vibration, No Deformation..
Note - When The Installation Amount Is Small, Take The Corresponding Bolts + Nuts, Fix The Thread Insert On The Screw And Fix It With The Same Type Of Nut To Make The Three In One. Use A Wrench To Screw The Threaded Insert Into The Bottom Hole And Remove The Screw..
Applications - Mainly Used For Various Low-Strength Metal And Non-Metal Materials, Such As Aluminum, Magnesium, Cast Iron, Plastic, Rubber, Mdf, Ceramics, Fiberglass, Wood. Improve The Strength And Wear Resistance Of Threaded Connections, Prevent Thread Loosening And Slippage.
Material - 304 Stainless Steel Has Good Corrosion Resistance, Rust Prevention, High Hardness, And Excellent Oxidation Resistance. It Is Austenitic Stainless Steel, Which Is Non-Magnetic Or Slightly Magnetic..
Features
- Size - Thread size: 7/16-14 UNC; effective length (after Installation): 3D = 33.3mm / 1.31"; free state length: 27mm / 1.06"; free state outer diameter: 13.6mm / 0.54"; type: helical; surface treatment: white washing.
- Material - 304 stainless steel has good corrosion resistance, rust prevention, high hardness, and excellent oxidation resistance. It is austenitic stainless steel, which is non-magnetic or slightly magnetic.
- Features - Designed with a certain of elastic, and provides an even load. Wire thread inserts have self-tapping capability without pre-tapping the base metal. Large contact surface with finished products, strong tensile force. Strong resistance to vibration, no deformation.
- Applications - Mainly used for various low-strength metal and non-metal materials, such as aluminum, magnesium, cast iron, plastic, rubber, MDF, ceramics, fiberglass, wood. Improve the strength and wear resistance of threaded connections, prevent thread loosening and slippage
- Note - When the installation amount is small, take the corresponding bolts + nuts, fix the thread insert on the screw and fix it with the same type of nut to make the three in one. Use a wrench to screw the threaded insert into the bottom hole and remove the screw.
- See more on Amazon...
Brand: HARFINGTON | Manufacturer: HARFINGTON
See On Amazon #18
HARFINGTON 20pcs Wire Thread Inserts M10 x 1.5 3D 304 Stainless Steel Helical Coiled Wire Threaded Sleeve
Asin: B0BFR9DB4X | Model: hta220809hh0204 | PartNumber: hta220809hh0204
Features - Designed With A Certain Of Elastic, And Provides An Even Load. Wire Thread Inserts Have Self-Tapping Capability Without Pre-Tapping The Base Metal. Large Contact Surface With Finished Products, Strong Tensile Force. Strong Resistance To Vibration, No Deformation..
Note - When The Installation Amount Is Small, Take The Corresponding Bolts + Nuts, Fix The Thread Insert On The Screw And Fix It With The Same Type Of Nut To Make The Three In One. Use A Wrench To Screw The Threaded Insert Into The Bottom Hole And Remove The Screw..
Applications - Mainly Used For Various Low-Strength Metal And Non-Metal Materials, Such As Aluminum, Magnesium, Cast Iron, Plastic, Rubber, Mdf, Ceramics, Fiberglass, Wood. Improve The Strength And Wear Resistance Of Threaded Connections, Prevent Thread Loosening And Slippage.
Material - 304 Stainless Steel Has Good Corrosion Resistance, Rust Prevention, High Hardness, And Excellent Oxidation Resistance. It Is Austenitic Stainless Steel, Which Is Non-Magnetic Or Slightly Magnetic..
Features
- Size - Thread Size: M10 x 1.5; Effective Length (after Installation): 3D=30mm; Type: Helical
- Material - 304 stainless steel has good corrosion resistance, rust prevention, high hardness, and excellent oxidation resistance. It is austenitic stainless steel, which is non-magnetic or slightly magnetic.
- Features - Designed with a certain of elastic, and provides an even load. Wire thread inserts have self-tapping capability without pre-tapping the base metal. Large contact surface with finished products, strong tensile force. Strong resistance to vibration, no deformation.
- Applications - Mainly used for various low-strength metal and non-metal materials, such as aluminum, magnesium, cast iron, plastic, rubber, MDF, ceramics, fiberglass, wood. Improve the strength and wear resistance of threaded connections, prevent thread loosening and slippage
- Note - When the installation amount is small, take the corresponding bolts + nuts, fix the thread insert on the screw and fix it with the same type of nut to make the three in one. Use a wrench to screw the threaded insert into the bottom hole and remove the screw.
- See more on Amazon...
Brand: HARFINGTON | Manufacturer: HARFINGTON
See On Amazon #19
HARFINGTON 20pcs Wire Thread Inserts M12 x 1.75 2.5D 304 Stainless Steel Helical Coiled Wire Threaded Sleeve
Asin: B0BFRBJTXX | Model: hta220809hh0212 | PartNumber: hta220809hh0212
Features - Designed With A Certain Of Elastic, And Provides An Even Load. Wire Thread Inserts Have Self-Tapping Capability Without Pre-Tapping The Base Metal. Large Contact Surface With Finished Products, Strong Tensile Force. Strong Resistance To Vibration, No Deformation..
Note - When The Installation Amount Is Small, Take The Corresponding Bolts + Nuts, Fix The Thread Insert On The Screw And Fix It With The Same Type Of Nut To Make The Three In One. Use A Wrench To Screw The Threaded Insert Into The Bottom Hole And Remove The Screw..
Applications - Mainly Used For Various Low-Strength Metal And Non-Metal Materials, Such As Aluminum, Magnesium, Cast Iron, Plastic, Rubber, Mdf, Ceramics, Fiberglass, Wood. Improve The Strength And Wear Resistance Of Threaded Connections, Prevent Thread Loosening And Slippage.
Material - 304 Stainless Steel Has Good Corrosion Resistance, Rust Prevention, High Hardness, And Excellent Oxidation Resistance. It Is Austenitic Stainless Steel, Which Is Non-Magnetic Or Slightly Magnetic..
Features
- Size - Thread Size: M12 x 1.75; Effective Length (after Installation): 2.5D=30mm; Type: Helical
- Material - 304 stainless steel has good corrosion resistance, rust prevention, high hardness, and excellent oxidation resistance. It is austenitic stainless steel, which is non-magnetic or slightly magnetic.
- Features - Designed with a certain of elastic, and provides an even load. Wire thread inserts have self-tapping capability without pre-tapping the base metal. Large contact surface with finished products, strong tensile force. Strong resistance to vibration, no deformation.
- Applications - Mainly used for various low-strength metal and non-metal materials, such as aluminum, magnesium, cast iron, plastic, rubber, MDF, ceramics, fiberglass, wood. Improve the strength and wear resistance of threaded connections, prevent thread loosening and slippage
- Note - When the installation amount is small, take the corresponding bolts + nuts, fix the thread insert on the screw and fix it with the same type of nut to make the three in one. Use a wrench to screw the threaded insert into the bottom hole and remove the screw.
- See more on Amazon...
Brand: HARFINGTON | Manufacturer: HARFINGTON
See On Amazon
Looking For Something Else?
Search