Nilight Magnetic LED Trailer Towing Light Kit 24ft Cable with 7 Pin Plug Tail Stop Amber Turn Signal License Plate Light on 12V RV Pickup Trucks Marine Boats Trailers, 2 Year Warranty (5 Wire System)
Asin: B0BTBWBT5V | Model: TR-143 | PartNumber: TR-143 | Ean: 0840323902298 | UPC: 840323902298
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Excellent Brightness: Left Lamp Has 16 Diodes Including 6 Diodes For License Plate Light. Right Lamp Has 10 Diodes Including 5 Diodes For Right Turn Signal, 5 Diodes For Tail Light. Quality Leds Draw Less Amperage But Outputs Optimal Brightness, Improving Great Visibility And Extend Longer Lifetime Than The Incandescent Lamp. Dot Compliance To Ensure Your 100% Safety.
Easy To Install: Comes With 2 Strong Magnetic On The Lights For Quick And Easy Fitting And Removal Of The Light. Just Need To Insert And Secure The 7-Pin Socket Into Your Existing 7-Way Trailer Plug Of The Towing Vehicle And Then Well Route The Wire Along The Trailer And Place The Magnetic Lights At The Rear Position, They Handle Bumpy Roads Without Falling Off. 2 Years Warranty Honored By Nilight..
Ip68 Entirely Submersible: Inside Leds And Circuit Board Is Fully Waterproof Sealed To Work Under Water Perfectly Without Electric Short Risk, Excellent Tightness Makes It Be Definitely Waterproof And Submersible.
Multi-Functions: 24Ft Cable To Light With A Standard 7 Pin Plug, Fit For 5-7 Wire Flat Pin Adapter, Combined Full Functions Of Stop/Brake Light, Tail Light, Rear Position, Direction Indicator, Reflector, And License Plate Light(Right Light No License Plate Light), But Not Has The Back Up Lights; Fit Most Usa 5 Wire Systems Standard 12V Trailer, Rvs, Campers, Trucks, Utes, Utvs, Construction Vehicles, Loaders, Boats, Flatbeds, Caravans, Etc..
Features
- 5-wire tail light systems only: these light kits are suitable for vehicles with 5-wire tail light systems only (with turn signals and brake light separated). It will not work for pickup SUVs with 4 wire tail light system such as 2005 Nissan Frontier 4x4 nismo, 2001 Ford F550. If using them for 4-wire vehicles, the brake light will light up in the wrong amber color instead of red color. Please double-check your trailer wiring plug connector before installation.
- Multi-functions: 24ft cable to light with a Standard 7 Pin Plug, fit for 5-7 wire flat Pin Adapter, combined full functions of stop/brake light, tail light, rear Position, direction indicator, reflector, and license plate light(Right light no license plate light), but not has the back up lights; Fit most USA 5 wire systems standard 12V trailer, RVs, campers, trucks, UTEs, UTVs, construction vehicles, loaders, boats, flatbeds, caravans, etc.
- Excellent Brightness: Left lamp has 16 diodes including 6 diodes for license plate light. Right lamp has 10 diodes including 5 Diodes for right turn signal, 5 diodes for tail light. Quality LEDs draw less amperage but outputs optimal brightness, improving great visibility and extend longer lifetime than the incandescent lamp. DOT Compliance to ensure your 100% safety
- IP68 entirely submersible: inside leds and circuit board is fully waterproof sealed to work under water perfectly without electric short risk, excellent tightness makes it be definitely waterproof and submersible
- Easy to install: Comes with 2 strong magnetic on the lights for quick and easy fitting and removal of the light. Just need to insert and secure the 7-pin socket into your existing 7-way trailer plug of the towing vehicle and then well route the wire along the trailer and place the magnetic lights at the rear position, they handle bumpy roads without falling off. 2 Years Warranty Honored by Nilight.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Warranty: 2 Years Warranty
See On Amazon Similar To Nilight Magnetic LED Trailer Towing
#1
Nilight - TL-01 6" Oval Red LED Tail 2PCS w/Surface Mount Grommets Plugs IP65 Waterproof Stop Brake Turn Trailer Lights for RV Truck Jeep, 2 Years Warranty
Asin: B07PKBZGCR | Model: TL-01 | PartNumber: TL-01 | Ean: 0714035518798 | UPC: 714035518798
Upgraded Unique Design: Niligh's Tail Light Has Unique “Ears” On Its Two Sides, Upgrade Notches On The Inside Of Grommet, And A Tighter Attaching Ability Between 3-Prong Plug And It. These Help The Light Fit Perfectly And Firmly On The Grommet, And The 3-Prong Plug Attaches Tightly On The Light. Shake Proof, There Will Be No Worries Of Loosing Light Or Wires.
Universal Application: Work On 12V Dc System, Function As Turn/Brake Light, Tail Light For All Kinds Of Trucks, Trailers, Tractors, Semi-Trailer, Horse Trailer, Travel Trailer, Dump Truck, Special Vehicle, Etc. Just Make Sure The Hole Size Before Your Purchase. 2 Years Warranty Honored By Nilight..
Ready For The Weather: Be Highly Silicon Sealed, Ip67 Waterproof Rating, Always Be Ready For Different Kinds Of Weather Attack.
Easy Installation: The Taillight Comes With Grommets For Surface Mount, Also Added A 3-Prong Watertight Plug With Attached Wire. For Installation, You Just Need To Surface Mount The Grommets & Light Setup, And Then Connect The 3 Wires To The Corresponding Wires On Vehicles. Hole Size For Surface Mount Is: 6. 6” X2. 5” X 1. 75”.
Features
- Awesome Brightness: Each tail light has 10PCS high-quality SMD LEDs to output super bright red light, high brightness for Turn/Brake light, low brightness for Tail light, improving visibility and ensuring you a safer night.
- Easy Installation: The taillight comes with grommets for surface mount, also added a 3-prong watertight plug with attached wire. For installation, you just need to surface mount the grommets & light setup, and then connect the 3 wires to the corresponding wires on vehicles. Hole size for surface mount is: 6. 6 x2. 5 x 1. 75
- Upgraded Unique Design: Niligh's tail light has unique ears on its two sides, upgrade notches on the inside of grommet, and a tighter attaching ability between 3-prong plug and it. These help the light fit perfectly and firmly on the grommet, and the 3-prong plug attaches tightly on the light. Shake proof, there will be no worries of loosing light or wires
- Ready For The Weather: Be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack
- Universal Application: Work on 12V DC system, function as turn/Brake light, tail light for all kinds of trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump Truck, special vehicle, etc. Just make sure the hole size before your purchase. 2 Years Warranty Honored by Nilight.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Weight: 0.95 Pounds
Warranty: 2 Years Warranty
See On Amazon #2
Nilight 2 Pcs 4 Inch 60W Led Pods with 2 Inch Tow Hitch Mounting Brackets Backup Reverse Lights Rear Light Bar for Pickup ATV SUV Truck Trailer Boat
Asin: B08HV68RSJ | Model: ZH419 | PartNumber: ZH419 | Ean: 0781621093021 | UPC: 781621093021
High-Quality Aluminum Alloy Material And Advanced Production Process, The Tow Hitch Mounting Bracket Is Impact Resistant And Anti-Corrosion..
Package Includes: 2 Pcs 60W Led Pods + 1Pcs 2" Tow Hitch Mounting Bracket,2 Years Warranty Honored By Nilight.
Design For Most Trucks, Suvs, Trailers Or Rvs With 2" Towing Hitch, Create Extra Mounting Points For These Vehicles With 2" Towing Hitch On The Back To Easily Mount A Pair Of Led Cubic Pods..
Combo Beam: Appropriate Combination Of Spot Beam And Flood Beam For Wide Spread And Further Distance Illumination..
Features
- brightness: powerful 60w led light bar, high-quality led chips and clear pc lens, this led pod emits 6000k pure white light, effectively light up the dark road during night.
- combo beam: appropriate combination of spot beam and flood beam for wide spread and further distance illumination.
- high-quality aluminum alloy material and advanced production process, the tow hitch mounting bracket is impact resistant and anti-corrosion.
- design for most trucks, suvs, trailers or rvs with 2 towing hitch, create extra mounting points for these vehicles with 2 towing hitch on the back to easily mount a pair of led cubic pods.
- package includes: 2 pcs 60w led pods + 1pcs 2 tow hitch mounting bracket,2 Years Warranty Honored by Nilight
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Warranty: 2 Years Warranty
See On Amazon #3
Nilight TL-11 1PC Red 9 LED ID Bar Marker Tail Black Stainless Steel Bracket for Truck Trailer Boat Identification Light, 2 Years Warranty
Asin: B07WW7QQ2Y | Model: TL-11 | PartNumber: TL-11 | Ean: 0767912577357 | UPC: 767912577357
Ready For All Weather Abuse: Ip67 Waterproof Sonically Welded Light Housing, Durable Abs Cover And The Anti-Corrosion Black Base Bracket, Make The Lightly Well Protected To Withstand All Weather Abuse.
Universal For Any 12V Vehicles More Than 80” Wide Like Trucks, Pickups, Travel Trailer, Boat Trailer, Horse Trailer, Camper Trailer, Cargo Trailer, Rv, Suv Motorhome Etc. Package Include: 1X Trailer Light Bar, 1X Hardware Pack. 2 Years Warranty Honored By Nilight..
Considerate Design For You: Comes With 2 Wire Leads For Straight Forward Electrical Connection, Red Wire To Positive, Black Wire For Negative. Mounting Bracket Also Features Notches And Carefully Added Glue At The Back For Easy Wire Routing And Perfect Surface Mounting.
Top Led Quality: 9 Upgraded Piranha Led, Which Feature Wider Lighting Angle, Higher Intensity Light, And Better Heat Dissipation, Is Used On The Trailer Light To Make It Very Durable And Output Bright Light Without Glare.
Features
- Enhanced Visibility and Safety: For your trailer 80 or wider that requires identification light, the ID bar marker light mounted on the top or between the taillights draws extra visibility for the wide range, makes the light more eye-catching to warn the upcoming car. Enhance your on-road safety
- Top LED Quality: 9 upgraded Piranha LED, which feature wider lighting angle, higher intensity light, and better heat dissipation, is used on the trailer light to make it very durable and output bright light without glare
- Ready For All Weather Abuse: IP67 waterproof sonically welded light housing, durable ABS cover and the anti-corrosion black base bracket, make the lightly well protected to withstand all weather abuse
- Considerate Design for You: Comes with 2 wire leads for straight forward electrical connection, red wire to positive, black wire for negative. Mounting bracket also features notches and carefully added glue at the back for easy wire routing and perfect surface mounting
- Universal for any 12V vehicles more than 80 wide like trucks, pickups, travel trailer, boat trailer, horse trailer, camper trailer, cargo trailer, RV, SUV Motorhome etc. Package Include: 1x trailer light bar, 1x hardware pack. 2 Years Warranty Honored by Nilight.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 1.46 x 14.00 x 1.73 inches | Weight: 0.33 pounds
Warranty: 2 Years Warranty
See On Amazon #4
Nilight TL-20 2PCS Submersible Kit Low Profile Rectangular LED Stop Tail Turn Signal Side Marker Light on 12V RV Pickup Trucks Marine Boats Trailers, 2 Years Warranty,Red, White, Black
Asin: B07X6MD52J | Model: TL-20 | PartNumber: TL-20 | Ean: 0812227032364 | UPC: 812227032364
Entirely Submersible: The Inside Leds And Circuit Board Is Fully Waterproof Sealed To Work Under Water Perfectly Without Electric Short Risk. The Light Housing Also Features Water Drainage For Added Protection.
Easy Installation: For Light Mounting: Lamp With License Plate Light On The Left Side, The Other On The Right Side. For Wiring Routing: Please See Picture 5 For Instruction. For Wiring Connection: Just Color To Color, White To The Ground (Vehicle Frame). For Hardware You Might Need To Use, Please See Pic 8 For Instruction.
Fit Type: Universal. 2 Years Warranty Honored By Nilight..
All-In-One Kit: Comes With Everything For Your Straightforward Installation Of The Light, Include Lights, License Plate Bracket, 25Ft Length Trailer Wiring Harness And The Different Types Of Stainless Steel Mounting Hardware.
Excellent Brightness: Left Lamp Has 27 Diodes Including 9 Diodes For License Plate Light, Right Lamp Has 12 Diodes. Quality Leds Draw Less Amperage But Outputs Optimal Brightness, Improving Great Visibility And Extend Longer Lifetime Than The Incandescent Lamp. Dot Compliance To Ensure Your 100% Safety.
Features
- Multi-functions: Combined functions of tail, brake/turn signals, side marker, license plate light. Perfect for 12V DC vehicles with a maximum width of 80 inches. Such as most of trailers, boats, trucks, RV, Marine, Pickups, camper, tractors etc
- Excellent Brightness: Left lamp has 27 diodes including 9 diodes for license plate light, right lamp has 12 diodes. Quality LEDs draw less amperage but outputs optimal brightness, improving great visibility and extend longer lifetime than the incandescent lamp. DOT Compliance to ensure your 100% safety
- Entirely Submersible: The inside LEDs and circuit board is fully waterproof sealed to work under water perfectly without electric short risk. The light housing also features water drainage for added protection
- All-in-one Kit: Comes with everything for your straightforward installation of the light, include lights, license plate bracket, 25ft length trailer wiring harness and the different types of stainless steel mounting hardware
- Easy Installation: For light mounting: Lamp with license plate light on the left side, the other on the right side. For wiring routing: Please see Picture 5 for instruction. For wiring connection: Just color to color, white to the ground (vehicle frame). For hardware you might need to use, please see Pic 8 for instruction
- Fit Type: Universal. 2 Years Warranty Honored by Nilight.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Warranty: 2 Years Warranty
See On Amazon #5
Nilight 2PCS 16Inch 11 LED Red Trailer Light Bar for Park Stop Turn signals Tail Brake Light DOT Compliant IP65 Waterproof Truck Trailer Marker ID Bar, 2 Years Warranty
Asin: B07V7BF18S | Model: TL-10 | PartNumber: TL-10 | Ean: 0767912577203 | UPC: 767912577203
Easy Wire Connection For Wire Connection White Wire For Ground Black Wire For Low Brightness Tail Light And Red Wire For High Brightness Brake Light.
Wide Application Can Be Perfectly Used On Most 12V Heavy Duty Trucks, Semi Trailers, Cargo Trailers, Boat Trailers, Travel Trailers, Horse Trailers, Rv Camper Work Vehicles, Etc. Package Include 2Pcs Trailer Marker Id Bar With 2 Hardware Pack. 2 Years Warranty Honored By Nilight..
Light Bar Mounting To Flush-Mounting The Light One Option Is To Drill A Center Hole Or Use The Existing Hole To Go Through The Back Wire Lead And Then Fix The Two Ends By Drilling In The Two Screws Provided The Other Option Is To Add Some Washer When Fixing The Two Ends Or Use A Bracket To Mount The Light To Avoid Drilling Holes For The Back Wire Lead.
Highly Sealed & Durable The Front Polycarbonate Lens Is Sonically Welded To The Housing And The Back Wire Lead Is Add On Glue To Make Sure The Light Is Completely Sealed Waterproof Enough To Withstand All Weather Abuse.
Features
- Multi-functions Each light has 11 high quality LED outputs high brightness and low brightness Can functions perfectly as parking light stop light turn signal light tail light and brake light
- Highly Sealed & durable The front Polycarbonate lens is sonically welded to the housing and the back wire lead is add on glue to make sure the light is completely sealed Waterproof enough to withstand all weather abuse
- Easy Wire Connection For wire connection white wire for ground black wire for low brightness tail light and red wire for high brightness brake light
- Light Bar Mounting To flush-mounting the light one option is to drill a center hole or use the existing hole to go through the back wire lead and then fix the two ends by drilling in the two screws provided The other option is to add some washer when fixing the two ends or use a bracket to mount the light to avoid drilling holes for the back wire lead
- Wide Application Can be perfectly used on most 12V heavy duty trucks, semi trailers, cargo trailers, boat trailers, travel trailers, horse trailers, RV camper work vehicles, etc. Package Include 2PCS trailer marker ID bar with 2 hardware pack. 2 Years Warranty Honored by Nilight.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Weight: 0.57 Pounds
Warranty: 2 Years Warranty
See On Amazon #6
Nilight 6" Oval Red LED Trailer Tail Light Surface Mount 2PCS 10 LED Waterproof Stop Brake Turn Trailer Lights for Truck RV Boat Bus Lorry Camper Van Caravan, 2 Years Warranty
Asin: B0BS18HR3K | Model: TR-140 | PartNumber: TR-140 | Ean: 0840323901796 | UPC: 840323901796
【Free Of Cutting Holes】Surface Mount Design, Free Of Doing Measurement And Cutting Holes..
【Wide Applications】Can Be Used As Tail Light, Turn Signal, Stop Light, Side Marker Light, Clearance Light, Rear Light. Ideal For Most 12V Vehicles And Devices Such As Trucks, Trailers, Bus, Rv, Pickup, Tractors, Semi-Trailer, Boat Trailer, Horse Trailer, Travel Trailer, Dump Truck, Etc..
【Package Include】2 Pcs 6" Oval Tail Light, 8 Self-Tapping Screws. 2 Years Warranty Honored By Nilight..
【Easy To Install】White Wire - Ground, Red Wire - High Brightness For Brake Or Stop Light, Black Wire - Low Brightness For Tail Or Running Light. With 8 Self-Tapping Screws, Just Use A Gundrill, Screwdriver Or Other Tools To Mount To Metal. Note: This Is Not Plug And Play Type Wire Harness, Is Hard Wired..
【Ready For The Weather】Made Of High-Quality Abs And Pc Lens, Using Ultrasonic Welding Technology To Ensure Waterproof, Shock-Proof And Dust-Proof Sealing. Everything We Do Is To Make It Easier For You To Cope With The Complicated Climatic Environment..
Features
- Super Bright Each trailer tail light is equipped with 10PCS high-quality 3030 LED chips to output super bright red light, high brightness of Turn or Brake light, low brightness for Taillight, providing maximum visibility and safety. Compared with halogen bulb, LEDs have the characteristics of fast light emission, low energy consumption, and high brightness.
- Ready For The Weather Made of high-quality ABS and PC lens, using ultrasonic welding technology to ensure waterproof, shock-proof and dust-proof sealing. Everything we do is to make it easier for you to cope with the complicated climatic environment.
- Free of Cutting Holes Surface mount design, free of doing measurement and cutting holes.
- Easy to Install White Wire - ground, Red wire - high brightness for brake or stop light, Black wire - low brightness for tail or running light. With 8 self-tapping screws, just use a gundrill, screwdriver or other tools to mount to metal. Note: This is NOT plug and play type wire harness, is hard wired.
- Wide Applications Can be used as tail light, turn signal, stop light, side marker light, clearance light, rear light. Ideal for most 12V vehicles and devices such as trucks, trailers, bus, RV, pickup, tractors, semi-trailer, boat trailer, horse trailer, travel trailer, dump truck, etc.
- Package Include 2 pcs 6 oval tail light, 8 self-tapping screws. 2 Years Warranty Honored by Nilight.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Warranty: 2 Years Warranty
See On Amazon #7
Nilight - TL-34 2PCS Steel Trailer Light Boxes Housing Kit w/6Inch Oval Red LED Tail Lights 2 Inch Round Side Marker w/Grommet Plugs Wire connectors, Years Warranty
Asin: B08N4LXM7Y | Model: TL-34 | PartNumber: TL-34 | Ean: 0751433166763 | UPC: 751433166763
Awesome Brightness: Use High-Quality Smd Led, Lights Output Excellent High Brightness Red Light For Stop Turn Light, Low Brightness For Tail Side Marker Light, Greatly Improving Visibility And Ensuring You A Safer Night..
Simple Installation: All In A Set And Lights Are Mounted On The Box. Just Hardwire Each Pigtail Wire To The Corresponding Wire On Trailer. And Then Weld On Or Bolt On The Light Box To The Trailer Frame. 2 Years Warranty Honored By Nilight..
Color Coded Wires: White Wire With O Ring Terminal For Ground, Black Wire For Tail Side Marker Light, Red Wire For Stop Turn Light..
Solid Built : Made Of Heavy Duty Steel, Painted With Quality Black Powder-Coated Finish, And Pre-Cut Holes For 6” Oval Light, 2” Round Side Light & License Plate Mounting. Durable For All Weather Elements..
Features
- Main Purpose: Works as a complete trailer tail light guard box set for your new or existing trailer, has stop turn tail lighting modes. Can be directly welded on or bolted on to the rear, side, bottom or top frame of your trailer.
- Solid Built : Made of heavy duty steel, painted with quality black powder-coated finish, and pre-cut holes for 6 oval light, 2 round side light & license plate mounting. Durable for all weather elements.
- Awesome Brightness: Use high-quality SMD LED, lights output excellent high brightness red light for stop turn light, low brightness for tail side marker light, greatly improving visibility and ensuring you a safer night.
- Color Coded Wires: White wire with O ring terminal for ground, black wire for tail side marker light, red wire for stop turn light.
- Simple Installation: All in a set and lights are mounted on the box. Just hardwire each pigtail wire to the corresponding wire on trailer. And then weld on or bolt on the light box to the trailer frame. 2 Years Warranty Honored by Nilight.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Weight: 1.50 pounds
Warranty: 2 Years Warranty
See On Amazon #8
Nilight - TL-16 2PCS 3.9 Inch 3 LED Truck Trailer Amber Light Front Rear LED Side Marker Lights Clearance Indicator Lamp Perfect Sealed Waterproof Surface Mounted LED Marker Light, 2 Years Warranty
Asin: B07V7F1RQX | Model: TL-16 | PartNumber: TL-16 | Ean: 0812227032302 | UPC: 812227032302
Awesome Reflector Design: The Marker Light Employs A Micro-Reflex Faceted Reflector Design, Increasing The Light Output And Adding On An Exquisite Appearance.
Simple Installation: Black Wire For Ground, Red Wire For Positive. Just Fix The Black Base With The 2 Flat Head Screws Provided, And Then Snap The Light Into The Base. To Run Through The Back Wire Lead, You Can Either Drill A Center Hole, Or Use Some Washers When Fixing The Base, So You Can Get Space To Run The Wire Lead Without Drilling Center Hole. 2 Years Warranty Honored By Nilight..
Highly Sealed: Lens And Housing Are Sonically Welded As A Whole Unit, Inside Leds Are Also Surface-Sealed. Be Ready For All Weather Abuse.
Upgraded Leds: Use 3 Quality Piranha Led, Featuring Better Heat Dissipation, Wider Lighting Angel, Higher Light Intensity, And Longer Lifetime, Make The Light Super Durable And Outputs Excellent Amber Light.
Features
- Featured Functions: Used as led marker light in front, rear side roof top or led clearance light indicator light on any 12V pickups truck trailers SUV RV van caravan camper boat lorry bus etc.
- Upgraded LEDs: Use 3 quality Piranha LED, featuring better heat dissipation, wider lighting angel, higher light intensity, and longer lifetime, make the light super durable and outputs excellent amber light
- Awesome Reflector Design: The marker light employs a micro-reflex faceted reflector design, increasing the light output and adding on an exquisite appearance
- Highly sealed: Lens and housing are sonically welded as a whole unit, inside leds are also surface-sealed. Be ready for all weather abuse
- Simple Installation: Black wire for ground, red wire for positive. Just fix the black base with the 2 flat head screws provided, and then snap the light into the base. To run through the back wire lead, you can either drill a center hole, or use some washers when fixing the base, so you can get space to run the wire lead without drilling center hole. 2 Years Warranty Honored by Nilight.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Weight: 1.00 Pounds
Warranty: 2 Years Warranty
See On Amazon #9
Nilight - TL-18 2PCS 4" Round Red LED Trailer Tail Lights w/Surface Mount Grommet Plugs IP67 Stop Brake Turn Tail Lights for Truck Trailer RV Jeep, 2 Years Warranty
Asin: B07Z4NL3TV | Model: TL-18 | PartNumber: TL-18 | Ean: 0812227032326 | UPC: 812227032326
Easy Installation: Just Surface Mount The Grommets & Light Setup, Attach The 3-Prong Plug To Light, And Then Connect The 3 Wires Lead. Hole Size For Surface Mount Is: 4. 3” Diameter Hole, 2” Depth.
Universal Application: Work On 12V Dc System, Function As Turn/Brake Light, Tail Light For All Kinds Of Trucks, Trailers, Tractors, Semi-Trailer, Horse Trailer, Travel Trailer, Dump Truck, Special Vehicle, Etc. Just Make Sure The Hole Size Before Your Purchase. 2 Years Warranty Honored By Nilight..
Ready For The Weather: Be Highly Silicon Sealed, Ip67 Waterproof Rating, Always Be Ready For Different Kinds Of Weather Attack.
Stand Out Brightness: Output 3 Time Brighter Light Than Others. High Brightness For Turn/Brake Light, Low Brightness For Tail Light. Improve Visibility And Ensure You A Safer Night.
Features
- Top LED: Each light has 12PCS upgrade Piranha LEDs, feature better heat dissipation, wider lighting angle, higher intensity light and extend a longer lifetime, features excellent bright light and extend a longer lifetime
- Stand Out Brightness: Output 3 time brighter light than others. High brightness for Turn/Brake light, low brightness for Tail light. Improve visibility and ensure you a safer night
- Easy Installation: Just surface mount the grommets & light setup, attach the 3-prong plug to light, and then connect the 3 wires lead. Hole size for surface mount is: 4. 3 diameter hole, 2 depth
- Ready For The Weather: Be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack
- Universal Application: Work on 12V DC system, function as turn/Brake light, tail light for all kinds of trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump Truck, special vehicle, etc. Just make sure the hole size before your purchase. 2 Years Warranty Honored by Nilight.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Warranty: 2 Years Warranty
See On Amazon #10
Nilight 2PCS Square LED Trailer Light Kit Low Profile Submersible IP68 LED Stop Turn Tail Side Marker License Light for 12V Utility Trailer Boat Camper RV Trucks Marine Snowmobile,2 Years Warranty
Asin: B08C7XN4P8 | Model: TL-22 | PartNumber: TL-22 | Ean: 0781621092956 | UPC: 781621092956
Ip68 Entirely Submersible: Inside Leds And Circuit Board Is Fully Waterproof Sealed To Work Under Water Perfectly Without Electric Short Risk. The Light Housing Also Features Water Drainage For Added Protection.
Easy Installation: Light Mounting: Stud-Mounted On The Surface Design, Light With License Light On The Left, The Other On Right. Wiring Connection: Color Coded Wire, Just Color To Color White To The Ground (Vehicle Frame) And Then Follow Picture 6 For Wire Routing Instruction. 2 Years Warranty Honored By Nilight..
All-In-One Kit: Comes With Everything For Your Straightforward Installation, Include Square Lights, Amber Clearance Light, License Plate Bracket, 25Ft Length Trailer Wiring Harness, The Reflector And The Different Types Of Stainless Steel Mounting Hardware. (For Hardware Instruction, Please Picture 8).
Brighter And Safe: Employ Quality Led To Draw Less Amperage But Outputs Optimal Brightness, Improving Great Visibility And Extend Longer Lifetime Than The Incandescent Lamp. 100% Dot Compliance To Ensure Your Safety.
Features
- 7 Full Functions: Combined functions of stop, turn tail light, side marker, side reflector, rear reflector, license plate light. Perfect for 12V DC vehicles with max width of 80 inches. Fit most trailers, boats, trucks, RV, Marine, Pickups, camper, tractors, etc. bus, lorry, van, caravan, snowmobile utility trailers
- Brighter and Safe: Employ quality led to draw less amperage but outputs optimal brightness, improving great visibility and extend longer lifetime than the incandescent lamp. 100% DOT Compliance to ensure your safety
- IP68 Entirely Submersible: Inside LEDs and circuit board is fully waterproof sealed to work under water perfectly without electric short risk. The light housing also features water drainage for added protection
- All-in-one Kit: Comes with everything for your straightforward installation, include square lights, amber clearance light, license plate bracket, 25ft length trailer wiring harness, the reflector and the different types of stainless steel mounting hardware. (For hardware instruction, please picture 8)
- Easy Installation: Light mounting: stud-mounted on the surface design, light with license light on the left, the other on right. Wiring connection: color coded wire, just color to color white to the ground (vehicle frame) and then follow picture 6 for wire routing instruction. 2 Years Warranty Honored by Nilight.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Warranty: 2 Years Warranty
See On Amazon #11
Nilight - TL-33 4PCS 3.9 Inch 3 Led Truck Trailer Light Front Rear Side Clearance Indicator Lamp Waterproof Sealed Surface Mounted LED Marker Light
Asin: B08K8T53KT | Model: TL-33 | PartNumber: TL-33 | Ean: 0751433167142 | UPC: 751433167142
Awesome Reflector Design: The Marker Light Employs A Micro-Reflex Faceted Reflector Design, Increasing The Light Output And Adding On An Exquisite Appearance..
Simple Installation: Black Wire For Ground, Red Wire For Positive. Just Fix The Black Base With The Flat Head Screws Provided, And Then Snap The Light Into The Base. To Run Through The Back Wire Lead, You Can Either Drill A Center Hole, Or Use Some Washers When Fixing The Base, So You Can Get Space To Run The Wire Lead Without Drilling Center Hole..
Fit Type: Universal Fit. 2 Years Warranty Honored By Nilight..
Highly Sealed: Lens And Housing Are Sonically Welded As A Whole Unit, Inside Leds Are Also Surface-Sealed. Be Ready For All Weather Abuse..
Upgraded Leds: Use 3 Quality Piranha Led, Featuring Better Heat Dissipation, Wider Lighting Angel, Higher Light Intensity, And Longer Lifetime, Make The Light Super Durable And Outputs Excellent Amber Or Red Light..
Features
- featured functions: used as led marker light at front rear side roof top or led clearance light indicator light on any 12v pickups truck trailers suv rv van caravan camper boat lorry bus etc.
- upgraded leds: use 3 quality piranha led, featuring better heat dissipation, wider lighting angel, higher light intensity, and longer lifetime, make the light super durable and outputs excellent amber or red light.
- awesome reflector design: the marker light employs a micro-reflex faceted reflector design, increasing the light output and adding on an exquisite appearance.
- highly sealed: lens and housing are sonically welded as a whole unit, inside leds are also surface-sealed. be ready for all weather abuse.
- simple installation: black wire for ground, red wire for positive. just fix the black base with the flat head screws provided, and then snap the light into the base. to run through the back wire lead, you can either drill a center hole, or use some washers when fixing the base, so you can get space to run the wire lead without drilling center hole.
- Fit type: Universal Fit. 2 Years Warranty Honored by Nilight.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Weight: 0.56 Pounds
Warranty: 2 Years Warranty
See On Amazon #12
Nilight 2PCS Magnetic Base LED Light Bar Mounting Brackets, Powerful Sucker Holder for Bottom-Mounted Offroad LED Work Light Mounting on Hood, 2 Years Warranty
Asin: B0831MG3CM | Model: 90042B | PartNumber: 90042B | Ean: 0732694520372 | UPC: 732694520372
Multiple Mounting Functions: You Can Use A Single Magnetic Base Separately To Mount Small Led Work Light, Or Use Two Or Three Together To Mount A Longer Bottom-Mounted Led Light Bar..
Package Include: 2 X Magnetic Mounting Base, 2 Years Warranty Honored By Nilight.
Easier Mounting: No Drilling Needed, Just Do Flattest, Mount The Light On The Bracket, And Then Mount The Whole Kit On The Mounting Position. For Detailed Mounting Tips, Please The 7Th Picture On The Left..
Anti-Scratch: The Magnetic Bases Are Coated With Rubber Cover To Protect From Scratching The Hood And Add On A Secure Installation..
Features
- Strong Hold: Each magnetic base comes with 12 PCS magnets. Once matching well with the flat surface, it is strongly held even on emergency braking or driving on the rugged mountain road.
- Anti-scratch: The magnetic bases are coated with rubber cover to protect from scratching the hood and add on a secure installation.
- Multiple Mounting Functions: You can use a single magnetic base separately to mount small led work light, or use two or three together to mount a longer bottom-mounted LED light bar.
- Easier Mounting: No drilling needed, just do flattest, mount the light on the bracket, and then mount the whole kit on the mounting position. For detailed mounting tips, please the 7th picture on the left.
- Package Include: 2 x magnetic mounting base, 2 Years Warranty Honored by Nilight
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 1.14 x 4.53 x 4.06 inches | Weight: 0.09 Pounds
Warranty: 2 years warranty.
See On Amazon #13
Nilight Amber/Red LED Fender Marker Lights for Trailers and Trucks - 2 Year Warranty
Asin: B08W58X3CH | Model: TL-43 | PartNumber: TL-43 | Ean: 0727196414113 | UPC: 727196414113
Simple & Tidy Installation: Lights Are Pre-Wired With Connectors And Designed With Extended Bracket Housing, Offer You A Quick Wire Connection And Convenient And Tidy Wire Routing, Protecting It From Exposure And Damages.
Application: Can Be Widely Used On 12V Trailer Trucks, Freightliner, Emergency Vehicles And Service Vehicles Etc 2 Years Warranty Honored By Nilight..
Wires Connection: Comes With About 7” Wire Lead, Wire Gauge 22Awg, Black Wire With Ring Terminal To Ground,Red Wire To 12V Positive Tail Light Wire.
High Visibility Light: Both Left And Right Fend Light Use 14Pcs Led Diodes, 7Pcs For Amber Light At Front And 7Pcs For Red Lights At Rear, Output Highly Visible Marker Light For Your Enclosed Trailer.
Features
- Main Purpose: Designed in dual faces mounted on the top of fenders, work as both front and rear clearance marker lights, easily help you and other drivers behind identify the widest point of trailer, ensuring a safer drive & better protection
- High Visibility Light: Both left and right fend light use 14PCS led diodes, 7PCS for amber light at front and 7PCS for red lights at rear, output highly visible marker light for your enclosed trailer
- Simple & Tidy Installation: Lights are pre-wired with connectors and designed with extended bracket housing, offer you a quick wire connection and convenient and tidy wire routing, protecting it from exposure and damages
- Wires Connection: Comes with about 7 wire lead, wire gauge 22AWG, black wire with ring terminal to ground,red wire to 12V positive tail light wire
- Application: Can be widely used on 12V trailer trucks, freightliner, emergency vehicles and service vehicles etc 2 Years Warranty Honored by Nilight.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 1.00 x 1.00 x 1.00 inches | Weight: 1.00 pounds
Warranty: 2 Years Warranty
See On Amazon #14
Nilight TL-14 10PCS 3.8 6 Amber Indicator Rear Side Truck Trailer RV Cab Boat Bus Lorry LED Marker Clearance Light, 2 Years Warranty
Asin: B07V7FB4CB | Model: TL-14 | PartNumber: TL-14 | Ean: 0812227032289 | UPC: 812227032289
Simple Installation: 2 Wire Connection, Yellow For Positive, Black For Negative. 3 Steps Of Light Mounting: Mark And Drill Holes According To The Foam Tape Base Provided; Peel And Stick The Foam Tape To The Light; Run Through The Wire Lead To The Center Hole And Use Bolts And Nuts To Fix 2 Sides. Center Hole Might Not Be Necessary If Use Some Washer Under The Foam Tape Base When Fixing The Two Sides..
Package Include: 10 Pack Of Amber Side Marker Light, Include Hardware Pack And Foam Tape Base. 2 Years Warranty Honored By Nilight..
Widely Used: Ideal For Most 12V Trailer, Buses, Trucks, Trailers, Lorries, Rv, Boat As Led Marker Light Clearance Light Indicator Light..
Awesome Seal: Decently Sealed At Both Front Lens And Back Wire Lead. Compared With Other Brands, Our Back Wire Lead Is Added Proper Glue To Make It Completely Seal Without Affecting The Surface Mount..
Features
- Excellent Brightness: Each light comes with 6PCS high intensity 2835 SMD LEDs, outputs excellent bright 120LM light for perfect marker light.
- Awesome Seal: Decently sealed at both front lens and back wire lead. Compared with other brands, Our back wire lead is added proper glue to make it completely seal without affecting the surface mount.
- Simple Installation: 2 wire connection, yellow for positive, black for negative. 3 steps of light mounting: Mark and drill holes according to the foam tape base provided; Peel and stick the foam tape to the light; Run through the wire lead to the center hole and use bolts and nuts to fix 2 sides. Center hole might not be necessary if use some washer under the foam tape base when fixing the two sides.
- Widely Used: Ideal for most 12V trailer, buses, trucks, trailers, lorries, RV, boat as led marker light clearance light indicator Light.
- Package Include: 10 Pack of amber side marker light, include hardware pack and foam tape base. 2 Years Warranty Honored by Nilight.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Weight: 1.00 pounds
Warranty: 2 Years Warranty
See On Amazon #15
Nilight 7 Pin Round to 4 Pin 5 Pin Flat Blade Trailer Light Adapter 2 in 1 Trailer Plug 7 Way blade to 4 Way 5 Way Flat Trailer Connector Plug for Trailer Tow Hitch Car RV Boat Truck, 2 Years Warranty
Asin: B0BX6KFMJV | Model: 50302T | PartNumber: 50302T | Ean: 0840323903356 | UPC: 840323903356
Multiple Use: Combines 4 Way Plug With 5 Way Plug, And Can Be Used By Most Trailers, Allowing For Versatile Towing Options. Design Eliminates The Need For Cutting Or Splicing, Hassle Free Setup, Easy To Install And Remove. 7 Pin To 4/5 Pin Trailer Adapter Features Two Handles On Either Side Of The Plug For A Better Grip When Plugging In Or Unplugging Trailer Wiring..
Package Includes: 1X 7-Way Round To 4-Way 5 Way Flat Trailer Adapter, 1X User Manual, 2 Years Warranty By Nilight..
Application: The 7 Round To 4/5 Pin Trailer Adapter Easily Synchronizing The Trailer's Signal And Tail Lights Without Rewiring. Suitable For Towing Rv, Carts, Trailers, Pickups, Trucks, Ships, Motorcycles, Bicycle Frame, And Other Cars Which Come With American Sockets..
Reliable Connection: Sturdy, Heavy Duty, Solid And Ready To Go. Come With Dust Cover Protect Terminal From Dust And Water. Constructed With Dust-Free And High-Impact Glass-Filled Nylon Available For Used At Any Outdoor Conditions..
Features
- 7 Pin to 4/5 Pin Trailer Adapter:This 7 Pin Round to 4/5 Pin Trailer Adapter design to connect and transmit electrical signals between the tractor and the towed vehicle. It combines 4 way plug and 5 way plug, 2 in 1 design. Converts the 7-way trailer connector on the vehicle to a 4-way or 5-way connector to match the trailer, so you can use this for anything from your wiring harnesses on your towing vehicles or boat trailers.
- Reliable Connection: Sturdy, heavy duty, solid and ready to go. Come with dust cover protect terminal from dust and water. Constructed with dust-free and high-impact glass-filled nylon available for used at any outdoor conditions.
- Multiple Use: Combines 4 way plug with 5 way plug, and can be used by most trailers, allowing for versatile towing options. Design eliminates the need for cutting or splicing, hassle free setup, easy to install and remove. 7 pin to 4/5 pin trailer adapter features two handles on either side of the plug for a better grip when plugging in or unplugging trailer wiring.
- Application: The 7 round to 4/5 pin trailer adapter easily synchronizing the trailer's signal and tail lights without rewiring. Suitable for towing rv, carts, trailers, pickups, trucks, ships, motorcycles, bicycle frame, and other cars which come with American sockets.
- Package Includes: 1x 7-Way Round to 4-Way 5 Way Flat Trailer Adapter, 1x User Manual, 2 Years Warranty by Nilight.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 2.20 x 4.84 x 2.76 inches | Weight: 0.42 pounds
Warranty: 2 Year Warranty
See On Amazon #16
Nilight 2PCS Magnetic Base LED Light Bar Mounting Brackets, Powerful Sucker Holder for Straight Curved Side-Mounted Light Bar Mounting on Hood Roof, 2 Years Warranty, Black
Asin: B0831M38LR | Model: 90041B | PartNumber: 90041B | Ean: 0767912577777 | UPC: 767912577777
Dual Mounting Functions & Directions: Can Be Used As A Whole To Mount Side-Mounted Light, Or Remove “L” Shape Bracket, Just Use The Magnetic Base To Mount Bottom-Mounted Light. For The “L” Shape Bracket, You Can Also Choose To Mount Them Inward Or Outward..
Package Include: 2 X Magnetic Mounting Brackets With Sucker Base. 2 Years Warranty Honored By Nilight.
Easier Mounting: No Drilling Needed, Just Do Flattest, Mount The Light On The Bracket, And Then Mount The Whole Kit On The Mounting Position. For Detailed Mounting Tips, Please Check The 9Th Picture On The Left..
High Compatibility: Can Be Used On The Hood Or Roof To Mount Any Side-Mounted Light Bars, Straight Or Curved, Single Row, Double Row, Triple Row, Or Quad Row. All Works Well And Still Remain Ample Room To Adjust The Mounting Angle Of The Light..
Features
- Strong Hold: Each magnetic base comes with 12 PCS magnets. Once matching well with the flat surface, it is strongly held, no falls down even on emergency braking or driving on the rugged mountain road.
- High Compatibility: Can be used on the hood or roof to mount any side-mounted light bars, straight or curved, single row, double row, triple row, or quad row. All works well and still remain ample room to adjust the mounting angle of the light.
- Dual Mounting Functions & Directions: Can be used as a whole to mount side-mounted light, or remove L shape bracket, just use the magnetic base to mount bottom-mounted light. For the L shape bracket, you can also choose to mount them inward or outward.
- Easier Mounting: No drilling needed, just do flattest, mount the light on the bracket, and then mount the whole kit on the mounting position. For detailed mounting tips, please check the 9th picture on the left.
- Package Include: 2 x magnetic mounting brackets with sucker base. 2 Years Warranty Honored by Nilight
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 4.00 x 8.00 x 4.00 Inches
Warranty: 2 Years Warranty
See On Amazon #17
Nilight Led Light Bar Super Slim 2Pcs 7 Inch 30W Spot Driving Fog Light 3600LM Off Road Lights Light Pods for Trucks Pickup SUV ATV UTV Boat 4x4 Van Camper- 2 Style Mounting,2 Years Warranty
Asin: B0197ZQLBA | Model: NI04-30W | PartNumber: NI04-30W | Ean: 0600537019041 | UPC: 600537019041
Ip67 Waterproof Rate Great Performance Of Waterproof Up To 3 3 Feet Of Water For 30 Minutes And Effectively Dust Proof, Shock Proof And Anti-Corrosion In The Extreme Weather.
The Package Includes 2Pcs 7Inch Nilight 30W Single Row Light Bar High & Low Adjustable Mounting Brackets Mounting Screws’ Sets , 2 Years Warranty By Nilight.
Long Lifespan Special Designed Aluminum Alloy Cooling Fins Effectively Extends The Lifespan To Over 30 000 Hours.
Durable Design, High Quality Aluminum Housing With Black Painted Skill High/Low Adjustable Stainless Steel Mounting Bracket For Better View And Shatterproof Pc Lenses Durable To Withstand Any Harsh Condition.
Features
- Bright soft light 3D projectors and advanced LED chips more concentrated soft light beam and further irradiation distance 6 x 5 Watt high power LEDs at 6 000K color temperature with 3600 Lumens
- Durable design, high quality aluminum housing with black painted skill High/Low adjustable stainless steel mounting bracket for better view and shatterproof PC lenses durable to withstand any harsh condition
- IP67 Waterproof rate Great performance of waterproof up to 3 3 feet of water for 30 minutes and effectively dust proof, shock proof and anti-corrosion in the extreme weather
- Long Lifespan Special designed aluminum alloy cooling fins effectively extends the lifespan to over 30 000 hours
- The package includes 2pcs 7Inch Nilight 30w Single Row Light bar High & Low Adjustable Mounting brackets Mounting Screws Sets , 2 Years Warranty by Nilight
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Dimensions: 3.00 x 7.00 x 3.00 inches | Weight: 2.80 Pounds
Warranty: 2 years.
See On Amazon #18
Nilight 6Inch Oval Trailer Tail Light 6PCS Red White 10LED with Flush Mount Grommets Plugs IP67 Waterproof Brake Turn Signals Reverse Lights for RV Truck Trailer, 2 Years Warranty
Asin: B0CCV67XF1 | Model: TL-29 | PartNumber: TL-29 | Ean: 0840323906524 | UPC: 840323906524
Upgraded Unique Design: Light Has Unique “Ears” On Its Two Sides, Upgrade Notches On The Inside Of Grommet, And A Tighter Attaching Ability Between 3-Prong Plug And It. These Help The Light Fit Perfectly And Firmly On The Grommet, And The 3-Prong Plug Attaches Tightly On The Light. Shakeproof, There Will Be No Worries Of Loosing Light Or Wire.
Universal Application: Work On 12V Dc System, Function As Stop/Turn/Reverse Light, Tail Light For All Kinds Of Trucks, Trailers, Tractors, Semi-Trailer, Horse Trailer, Travel Trailer, Dump Truck, Special Vehicle, Etc. Just Make Sure The Hole Size Before Your Purchase. 2 Years Warranty Honored By Nilight.
Ready For The Weather: The Light Adopts A Fully Sealed Design, Achieving Ip67 Waterproof Rating, Waterproof And Dustproof, And Can Be Used In Any Weather. Extend The Lifespan Of The Lights.
Easy Installation: Comes With Grommets For Surface Mount, Also Added A 3-Prong Watertight Plug With Attached Wire. For Installation, Just Need To Surface Mount The Grommets & Light Setup, And Then Connect The 3 Wires To The Corresponding Wires On Vehicles. Hole Size For Surface Mount Is: 6. 6” X2. 5” X 1. 75”. If There Are No Reserved Holes, You Can Use Our Size Cardboard To Drill Holes.
Features
- Awesome Brightness: Each tail light has 10PCS high-quality 3030 SMD LEDs to output super bright red/white light. The upgraded aluminum substrate dissipates heat faster, helps stabilize the circuit, and effectively extends the lifespan of the lights
- Easy Installation: Comes with grommets for surface mount, also added a 3-prong watertight plug with attached wire. For installation, just need to surface mount the grommets & light setup, and then connect the 3 wires to the corresponding wires on vehicles. Hole size for surface mount is: 6. 6 x2. 5 x 1. 75 . If there are no reserved holes, you can use our size cardboard to drill holes
- Upgraded Unique Design: Light has unique ears on its two sides, upgrade notches on the inside of grommet, and a tighter attaching ability between 3-prong plug and it. These help the light fit perfectly and firmly on the grommet, and the 3-prong plug attaches tightly on the light. Shakeproof, there will be no worries of loosing light or wire
- Ready For The Weather: The light adopts a fully sealed design, achieving IP67 waterproof rating, waterproof and dustproof, and can be used in any weather. Extend the lifespan of the lights
- Universal Application: Work on 12V DC system, function as stop/turn/reverse light, tail light for all kinds of trucks, trailers, tractors, semi-trailer, horse trailer, travel trailer, dump Truck, special vehicle, etc. Just make sure the hole size before your purchase. 2 Years Warranty Honored by Nilight
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Warranty: 2 Years Warranty
See On Amazon #19
Nilight LED Brake Light Trailer Hitch Cover Square Red Lens Brake Light Vehicle Tow Hitch Driving Brake Lamp 12 LEDs Brake Tail Light with 2" Receiver for Towing Truck RV and SUV, 2 Years Warranty
Asin: B0CTY8LQNJ | Model: TL-198 | PartNumber: TL-198 | Ean: 0840323919326 | UPC: 840323919326
【Keep Hitch Reciever Clean】Open Trailer Hitches Are Exposed To The Elements That Cause Rust And Accumulate Debris That Can Clog The Tubes, This Hitch Cover Can Protects Your Receiver Hitch And Keeps Your Trailer Hitch Clean.
【Package Included】 This Trailer Hitch Brake Light Comes With A Wire About 20.8In Long, As Well As A 4.3" Trailer Hitch Pin & Clip With A Grooved Head. The Pin Ensures A Snug Fit For 2 Or 2-1/2-Inch Receivers, Providing Added Safety When Your Hitch Is Not In Use. 2 Years Warranty Honored By Nilight.
【Easy Installation】The Brake Light Comes With A Standard 4-Way Flat Plug, Just Plug And Play, Saving You Valuable Time And Energy. Standard 4-Way Flat Plug, Drop-In Replacement For Your Existing Setup.
【Versatile & Compatible】The Nilight 12 Led Brake Light Trailer Hitch Cover Perfectly Fits Vehicles Equipped With A 2" X 2" Hitch Receiver. This Includes A Variety Of Vehicles Such As Trucks, Trailers, Suvs, And Pickups. It Is Also Compatible With Engineering Vehicles, Excavators, Mud Trucks, Logging Trucks, Special Vehicles, Fire Engines, Police Cars, And Emergency Vehicles.
【High Quality & Waterproof】 Our 2" Led Brake Light Trailer Hitch Cover Is Made Of High-Quality Pc Material, Providing Dustproof Protection For The Hitch Receiver. It Is Also Waterproof, Ensuring It Can Work Normally Even In Rainy Days. Protect Your Trailer Receiver From Rust, Mud, And Corrosion.
Features
- Brighter & Safer This red cover 2" hitch light features 12 ultra-bright red lens LEDs that alert vehicles from behind, ensuring enhanced visibility and safety on the road. Its long-lasting LED bulb has a lifespan of over 50,000 hours. Widely used, it can be used as boat trailer tail light, submersible trailer light, rear trailer light, driving light, stop/brake light, turn signal light and reverse light
- High Quality & Waterproof Our 2 LED Brake Light Trailer Hitch Cover is made of high-quality PC material, providing dustproof protection for the hitch receiver. It is also waterproof, ensuring it can work normally even in rainy days. Protect your trailer receiver from rust, mud, and corrosion
- Keep Hitch Reciever Clean Open trailer hitches are exposed to the elements that cause rust and accumulate debris that can clog the tubes, this hitch cover can protects your receiver hitch and keeps your trailer hitch clean
- Versatile & Compatible The Nilight 12 LED Brake Light Trailer Hitch Cover perfectly fits vehicles equipped with a 2 x 2 hitch receiver. This includes a variety of vehicles such as trucks, trailers, SUVs, and pickups. It is also compatible with engineering vehicles, excavators, mud trucks, logging trucks, special vehicles, fire engines, police cars, and emergency vehicles
- Package Included This trailer hitch brake light comes with a wire about 20.8in long, as well as a 4.3 Trailer Hitch Pin & Clip with a Grooved Head. The pin ensures a snug fit for 2 or 2-1/2-Inch Receivers, providing added safety when your hitch is not in use. 2 Years Warranty Honored by Nilight
- Easy Installation The brake light comes with a standard 4-way flat plug, just plug and play, saving you valuable time and energy. Standard 4-way flat plug, drop-in replacement for your existing setup
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Warranty: 2 Years Warranty
See On Amazon #20
Nilight 5PCS Red Round Trailer LED Marker Clearance Light 4 LED Flush Mount with Plug Grommet Pigtail Hardwired for Trailer Truck RV, 2 Years Warranty (TL-19)
Asin: B08N4BDGNF | Model: TL-19 | PartNumber: TL-19 | Ean: 0812227032357 | UPC: 812227032357
Simple Installation: Just Mount The Grommet Firstly On The Pre-Cut Or Existing Holes, Pop In The Marker Lights, And Then Connect To Power To Make It Work..
Wide Applications: Can Be Widely Used On Any Heavy Duty Truck, Pickup Truck,Trailer,Tractor,Dump,Buses,Vans,Rv Etc.
Fit Type: Universal Fit. 2 Years Warranty Honored By Nilight..
2 Prong Plug Wire Lead: Wire Gauge 22Awg, White Wire To Ground, Black Wire To 12V Tail Light Wire..
Lighting Functions: Can Serve As Both Reflector Side Marker Light And Reflector Light Led Clearance Light For Safer Driving..
Features
- Brightness & Safety: Each light use 4PCS quality LEDs to output excellent bright light. Also adopt specially designed polycarbonate lens to reflect back direct light, ensure a better visibility and safety at night.
- Lighting Functions: Can serve as both reflector side marker light and reflector light led clearance light for safer driving.
- Simple Installation: Just mount the grommet firstly on the pre-cut or existing holes, pop in the marker lights, and then connect to power to make it work.
- 2 Prong plug wire lead: Wire gauge 22AWG, white wire to ground, black wire to 12V tail light wire.
- Wide Applications: Can be widely used on any heavy duty truck, pickup truck,trailer,Tractor,Dump,Buses,Vans,RV etc
- Fit type: Universal Fit. 2 Years Warranty Honored by Nilight.
- See more on Amazon...
Brand: Nilight | Manufacturer: Nilight
Weight: 0.50 pounds
Warranty: 2 Years Warranty
See On Amazon
Looking For Something Else?
Search