GCCSJ Power Feed X-Axis for Milling Machine 450 in-lb Torque 0-200RPM Table Milling Machine Power Feed 110V
Asin: B0BTDBZ3WM
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Flexible Speed Control: This Multifunctional Milling Machine Power Feed Can Work With Different Speed Control According To Your Needs..
After-Sales Secive: You Will Get Worry-Free 18-Month Warranty And Lifelong Technical Guidance. Any Shipping Damage,Using Problems Or Missing Accessories, Please Feel Free To Cantact Us, We Will Solve Them For You..
Wide Compatiable:This Milling Table Power Feed Fits Some Vertical Knee Type Mills With The Same Mounting Pattern And A 5/8" Diameter Shaft On The End..
Excellent Transmission Effect: This Power Feed Adopts Gleason Spiral Bevel Gear, Stable Transmission Ratio And High Transmission Efficiency. And When Fast Transmission, It Prevents Collisions With Workpieces And Protects Transmission Plastic Gears And Electronic Parts From Damage..
Features
- Main Parameters: Power: 90W, Voltage: 110V, 60Hz, Rotate Speed: 200 RPM, Maximum Torque: 450 in-lb, Max feed rate: 650mm/min; Max return speed: 850mm/min.
- Excellent Transmission Effect: This power feed adopts gleason spiral bevel gear, stable transmission ratio and high transmission efficiency. And when fast transmission, It prevents collisions with workpieces and protects transmission plastic gears and electronic parts from damage.
- Flexible Speed Control: This multifunctional milling machine power feed can work with different speed control according to your needs.
- Wide Compatiable:This milling table power feed fits some vertical knee type mills with the same mounting pattern and a 5/8 diameter shaft on the end.
- After-sales Secive: You will get worry-free 18-month warranty and lifelong technical guidance. Any shipping damage,using problems or missing accessories, please feel free to cantact us, we will solve them for you.
- See more on Amazon...
Brand: GCCSJ | Manufacturer: GCCSJ
See On Amazon Similar To GCCSJ Power Feed XAxis for
#1
GCCSJ Power Feed Z-Axis for Milling Machine 460 in-lb Torque, 0-200RPM Table Milling Machine Power Feed 110V, for Bridgeport and Some Knee Type Mills with a 5/8" Diameter Shaft on the End
Asin: B0BTDFBKDD
Flexible Speed Control: This Multifunctional Milling Machine Power Feed Can Work With Different Speed Control According To Your Needs..
After-Sales Secive: You Will Get Worry-Free 18-Month Warranty And Lifelong Technical Guidance. Any Shipping Damage,Using Problems Or Missing Accessories, Please Feel Free To Cantact Us, We Will Solve Them For You..
Wide Compatiable: This Milling Table Power Feed Fits Some Vertical Knee Type Mills With The Same Mounting Pattern And A 5/8" Diameter Shaft On The End..
Excellent Transmission Effect: This Power Feed Adopts Gleason Spiral Bevel Gear, Stable Transmission Ratio And High Transmission Efficiency. And When Fast Transmission, It Prevents Collisions With Workpieces And Protects Transmission Plastic Gears And Electronic Parts From Damage..
Features
- Main Parameters: Power: 90W, Voltage: 110V, 60Hz, Rotate Speed: 200 RPM, Maximum Torque: 460 in-lb, Max feed rate: 650mm/min; Max return speed: 850mm/min.
- Excellent Transmission Effect: This power feed adopts gleason spiral bevel gear, stable transmission ratio and high transmission efficiency. And when fast transmission, It prevents collisions with workpieces and protects transmission plastic gears and electronic parts from damage.
- Flexible Speed Control: This multifunctional milling machine power feed can work with different speed control according to your needs.
- Wide Compatiable: This milling table power feed fits some vertical knee type mills with the same mounting pattern and a 5/8 diameter shaft on the end.
- After-sales Secive: You will get worry-free 18-month warranty and lifelong technical guidance. Any shipping damage,using problems or missing accessories, please feel free to cantact us, we will solve them for you.
- See more on Amazon...
Brand: GCCSJ | Manufacturer: GCCSJ
Dimensions: 3.56 x 11.88 x 7.20 Inches
See On Amazon #2
X-axis Power Feed, Table Feed AL-310SX(110V) #PF-X
Asin: B01M28OGW4
Features
- X-axis power feed, table feed Smooth running; special electrical relay protects against damage caused by power running; strong design for long-life trouble-free life; easy maintenance. Input voltage: 110v, 50/60 Hz, 1 PH Variable speed driving 135 in/lbs Torque Model---------0-200RPM
- See more on Amazon...
Brand: CME Tools | Manufacturer: CME
Weight: 20.00 pounds
See On Amazon #3
Dollate Power Feed X-Axis 450 in-lb Torque, 0-200RPM Rotate Speed 110V Power Feed Milling Machine for Bridgeport Type Milling Machine
Asin: B0BTHGTK4S | Model: X-Axis | PartNumber: X-Axis
【High Efficiency Device】The Power Feed Milling Machine Is Equiped With Gleason Spiral Bevel Gear, There Has The Advantages Of Stable Transmission Ratio, Low Transmission Noise, High Transmission Efficiency And High Bearing Capacity. In Addition, When Fast Transmission..
【Simple Operation】With Small Volume And Easy Installation, It Is Very Easy To Operate. We Will Send You A Install Instruction, It Has The Detail Of This Power Feed Milling Machine..
【Free Speed Adjustment】Our Handle Buttons Support A Variety Of Options, Easy To Operate, And Can Freely Adjust The Speed According To Your Needs..
【Stable Performance:】When The Power Feeder Is Fast-Feeding, If The Tool Collides With The Workpiece Or Reverses Instantly, The Special Safety Device Will Prevent The Transmission Plastic Gear And Electronic Components From Being Damaged, Effectively Protecting Your Device Intact..
Features
- Compatible Model This milling table power feed fits some vertical knee type mills with the same mounting pattern and a 5/8" diameter shaft on the end, such as Bridgeport, Precision Matthews, Enco, Jet, Sharp, Acer, Webb, etc.
- Stable performance: When the power feeder is fast-feeding, if the tool collides with the workpiece or reverses instantly, the special safety device will prevent the transmission plastic gear and electronic components from being damaged, effectively protecting your device intact.
- High Efficiency Device The power feed milling machine is equiped with Gleason Spiral Bevel Gear, there has the advantages of stable transmission ratio, low transmission noise, high transmission efficiency and high bearing capacity. In addition, when fast transmission.
- Free speed adjustment Our handle buttons support a variety of options, easy to operate, and can freely adjust the speed according to your needs.
- Simple Operation With small volume and easy installation, it is very easy to operate. We will send you a install instruction, it has the detail of this power feed milling machine.
- See more on Amazon...
Brand: Dollate | Manufacturer: Dollate
Dimensions: 7.80 x 12.50 x 11.20 inches
See On Amazon #4
FAHKNS Z-Axis Power Feed for Milling Machine 450 in-lb Torque 0-200RPM Table Milling Machine Power Feeder 110V for Bridgeport and Similar Knee Type Milling Machines(5/8" Diameter Shaft)
Asin: B0BZP7TSVV | Model: 170332-LTMHE | PartNumber: 170332-LTMHE | Ean: 0840366402175 | UPC: 840366402175
【Convient To Install】This Power Feed For Milling Machine Has The Small Size, Size: 7*3.5*12.8 Inch, Weight: 3.75Kg/8.27Lbs. Easy To Install, It Can Provide Stable Power Improve Work Efficiency..
【Flexible Speed Adjustment】This Power Feeder Unit Has 2 Different Ways Of Adjusting The Speed: Manual And Automatic. You Can Not Only Adjust The Speed By Manually Adjusting The Control Button, But Also Set The Device To Automatic Constant Speed, Freeing Your Hands And Making It Easier For You..
【High Transmission Efficiency】This Power Feed Built In Gleason Spiral Bevel Gear With Advantages Of Stable Transmission Ratio, High Transmission Efficiency And Low Transmission Noise..
【Ergonomic Design】Our Z-Axis Power Feed Machine Adopt Ergonomic Design, When The Tool Collides With The Workpiece Or Reverses Instantaneously, The Special Safety Device Protects The Transmission Plastic Gear And Electronic Parts From Damage..
Features
- Suitable Models This power feed fits some vertical knee type mills with the same mounting pattern and a 5/8" diameter shaft on the end. model: AL-460, power: 90W, 110V; torque:450in-lb, input voltage: 50/60Hz, single phase; rotate Speed:0-200 RPM.
- Ergonomic Design Our Z-Axis power feed machine adopt ergonomic design, when the tool collides with the workpiece or reverses instantaneously, the special safety device protects the transmission plastic gear and electronic parts from damage.
- Convient to Install This power feed for milling machine has the small size, size: 7*3.5*12.8 inch, weight: 3.75kg/8.27lbs. Easy to install, it can provide stable power improve work efficiency.
- High Transmission Efficiency This power feed built in Gleason Spiral Bevel Gear with advantages of stable transmission ratio, high transmission efficiency and low transmission noise.
- Flexible speed adjustment This power feeder unit has 2 different ways of adjusting the speed: manual and automatic. You can not only adjust the speed by manually adjusting the control button, but also set the device to automatic constant speed, freeing your hands and making it easier for you.
- See more on Amazon...
Brand: FAHKNS | Manufacturer: FAHKNS
See On Amazon
Looking For Something Else?
Search