ElecGear Analog Joystick Replacement for Steam Deck, No-Drifting Left and Right Thumbstick Unit Module PCB Assembly for MEDA and MHDA Controllers, 4X Spare Potentiometers and Repair Tool Kit Included
Asin: B0BTGW7MZ1 | Model: EL-SDAL/R | PartNumber: EL-SDAL/R
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.[Spare Potentiometers Included] – The Trim Pot Resistors Do Get Wear After Long Hours Gaming. It Needs To Be Replaced When Too Much Wear And Tear Accumulated: A Blind Spot, A Dead Spot, A Dead Zone, Creeping, Stuttering. We Added This Fragile Part In The Box For Some Super Diyer. Serious Soldering Skill Needed For The Replacing Operation.
[What’S In Box] – 1. Replacement Joystick Modules (Analog Edition Left And Right). 2. Additional 4X 10K Alps Potentiometers. 3. Ph0 Screwdriver. 4. Tweezers. 5. Plastic Opening Tools. (🔺Soldering Tools And Materials Are Not Included).
[Reminder Of Diy] – 1. Safely Power Off Your Console. 2. Teardown Your Steam Deck And Take Out The Problem Lr Units. 3. Desolder The Wire Of Sensitive Cap Off The Pcb. 4. Solder The Cap’S Wire. 5. Install The New Stick And Connect The Flex Cable. 6. Calibrate The New Module In Desktop Mode. (🔺Moderate Soldering Tools And Skill Needed For The Replacing Operation.).
[What Elecgear Did For A Better Analog Stick] – 1. Works With Both Meda And Mhda Controllers. 2. Variable Resistors Added To Eliminate The Possible Drifting In Hardware Level. 3. New Batch Of Alps Joystick Units Used On Pcb. 4. Esd Diode Added To Protect The Modules From Static Electricity.
Features
- [Analog Edition of Joystick for Steam Deck] Analog stick gives smoother movement, it s more liner and accurate. We did a further study on stock analog sticks for a better replacement joystick kit for Steam Deck. The kit consists of left and right thumbstick PCB assembly for a direct replacement. Additional potentiometer sensors in the box for further DIY
- [What ElecGear did for a better Analog Stick] 1. Works with both MEDA and MHDA controllers. 2. Variable resistors added to eliminate the possible drifting in hardware level. 3. New batch of ALPS joystick units used on PCB. 4. ESD diode added to protect the modules from static electricity
- [Spare Potentiometers included] The trim pot resistors do get wear after long hours gaming. It needs to be replaced when too much wear and tear accumulated: A blind spot, a dead spot, a dead zone, creeping, stuttering. We added this fragile part in the box for some super DIYer. Serious soldering skill needed for the replacing operation
- [Reminder of DIY] 1. Safely power off your console. 2. Teardown your Steam Deck and take out the problem LR units. 3. Desolder the wire of sensitive cap off the PCB. 4. Solder the cap s wire. 5. Install the new stick and connect the flex cable. 6. Calibrate the new module in desktop mode. ( Moderate soldering tools and skill needed for the replacing operation.)
- [What s in Box] 1. Replacement Joystick Modules (Analog Edition Left and Right). 2. Additional 4x 10K ALPS Potentiometers. 3. PH0 Screwdriver. 4. Tweezers. 5. Plastic Opening Tools. ( Soldering tools and materials are NOT included)
- See more on Amazon...
Brand: ElecGear | Manufacturer: ElecGear
Warranty: 30 days of FBA service
See On Amazon Similar To ElecGear Analog Joystick Replacement for
#1
IKPEK 20pcs 2K3 Ohm Potentiometer Replacement for Dualsense PS5 Controller, Trim Pot Resistor Thumbstick Module Sensor for ALPS Analog Joystick
Asin: B0BWRNWJDC
Install -- This Product Will Require Moderate Soldering To Install..
Customer Service & Warranty -- We Provide 3 Months Warranty For Replacement Potentiometer. If You Have Any Problem About The Product, Please Feel Free To Contact Us, We Will Reply You With 24 Hours..
Package Included -- 20 X 2K3 Ohm Potentiometer, 1 X Cross Screwdriver, 1 X Tweezer, 1 X Pry Tools, 1 X Pry Bar..
Solve Most Joystick Problem -- Stick Drift, Stuttering, Dead Zones, Creeping, Blind Spots, Non Centered..
Features
- Compatibility -- 2K3 Ohm Potentiometer Compatible with PS5 Controller Only (NOT FIT for PS4 Xbox One Xbox One S/X Controller).
- Solve Most Joystick Problem -- Stick drift, stuttering, dead zones, creeping, blind spots, non centered.
- INSTALL -- This product will require moderate soldering to install.
- Package Included -- 20 x 2K3 Ohm Potentiometer, 1 x Cross Screwdriver, 1 x Tweezer, 1 x Pry tools, 1 x Pry bar.
- Customer Service & Warranty -- We provide 3 months warranty for replacement Potentiometer. If you have any problem about the product, please feel free to contact us, we will reply you with 24 hours.
- See more on Amazon...
Brand: IKPEK | Manufacturer: IKPEK
Weight: 0.07 Pounds
See On Amazon #2
ElecGear 8X ALPS 2.1K Replacement Potentiometer + 4X Drift Fix PCB for PS5 DualSense, PS4 DualShock 4 Wireless Controller, Trim Pot Resistor Thumbstick Module Sensor for ALPS Analog Joystick
Asin: B07SKX5K2S | Model: 3PIN-Sensor | PartNumber: 3PIN-Sensor | Ean: 0797550074284, 0797550074673 | UPC: 797550074673, 797550074284
[Additional Drift Fix Pcb] – Several Factors Cause Joystick Drifting A Common Issue. Even New Joysticks Can Drift. The Potentiometer Was Born Without Precision. Wear To The Carbon Film, Spring Fatigue And Material Stretching Made It Not Centered. Dust, Moisture And Drop Make It Worse. We Packed Pcb To Fix The Problem Of Drifting In One Direction. Simply Adjust The Variable Resistor To Eliminate The Drifting.
[Reminder Of Replacement] – Use A Pair Of Pliers To Separate The Problem Sensor Off The Joystick Module. Try To Replace The Wiper First, See If It Works. De-Solder The Sensor Off The Pcb. A Metal Pick Helps To Clear The Holes. Soldering The New Unit In Is A Breeze. Remember To Calibrate The New Control Sticks In Settings.
[For Most Joystick Problem] – The Potentiometer Sensor Needs To Be Replaced When The Controller Has The Problem Of Creeping, Stuttering, A Blind Spot, A Dead Spot, A Dead Zone, Or It Wouldn't Center After Years Of Wear And Tear. De-Soldering The Unit With Only 3Pins Will Be A Lot Easier Than Replacing The Entire Joystick With As Many As 14 Prongs.
[Compatibility] – Alps Sensors Come In Two Different Resistance Values. Make Sure The Value Is Around 2.1K Before Ordering. Never Judge Its Value By Its Color. (Be Noticed: Choose 10Kω Version For Most Ps3, Ps4, Xbox One, Elite Series 1 And 2, Xbox Series S|X And Switch Pro Controllers. Alps Version Is Not Interchangeable With The Orange Version Made By Fu.).
Features
- [ALPS 2.1K Potentiometer] The OEM trim pot resistor was made by ALPS. It fits ALPS analog joysticks. This trimmer potentiometer works with PS5 DualSense and some PlayStation 4 DualShock 4 wireless controllers with 2.1K ohm ALPS thumbstick module inside
- [Compatibility] ALPS sensors come in two different resistance values. Make sure the value is around 2.1K before ordering. Never judge its value by its color. (Be noticed: Choose 10K version for most PS3, PS4, Xbox One, Elite Series 1 and 2, Xbox Series S|X and Switch Pro controllers. ALPS version is not interchangeable with the orange version made by FU.)
- [Additional Drift Fix PCB] Several factors cause joystick drifting a common issue. Even new joysticks can drift. The potentiometer was born without precision. Wear to the carbon film, spring fatigue and material stretching made it not centered. Dust, moisture and drop make it worse. We packed PCB to fix the problem of drifting in one direction. Simply adjust the variable resistor to eliminate the drifting
- [For most joystick problem] The potentiometer sensor needs to be replaced when the controller has the problem of creeping, stuttering, a blind spot, a dead spot, a dead zone, or it wouldn't center after years of wear and tear. De-soldering the unit with only 3Pins will be a lot easier than replacing the entire joystick with as many as 14 prongs
- [Reminder of Replacement] Use a pair of pliers to separate the problem sensor off the joystick module. Try to replace the wiper first, see if it works. De-solder the sensor off the PCB. A metal pick helps to clear the holes. Soldering the new unit in is a breeze. Remember to calibrate the new control sticks in settings
- See more on Amazon...
Brand: ElecGear | Manufacturer: ElecGear
Weight: 0.13 pounds
See On Amazon #3
ElecGear 4X Replacement Joystick (EL7 FU 2.3K) + Drift Fix PCB for PS5 Wireless Controller, Analog Stick Controller Sensor Assembly Thumbstick Module Compatible with DualSense Playstation 5
Asin: B09KVGHP6N | Model: EL7-FU-2.3K | PartNumber: EL7-FU-2.3K
[Additional Resistor] – Complicated Moving Mechanism And Daily Wear And Tear Finally Caused Drifting. Even New Sensors Cannot Be 100% Balanced. Calibrating In Controller Settings Might Not Work. We Packed 10X Correction Resistors To Solve The Potential Problem In Hardware Level. Solder One Or Two Paralleled Tiny Resistors Onto The Potentiometer At The Opposite Direction Against Drifting. It Will Help Correct 3 To 5 Degrees Drifting.
[Reminder Of Diy] – With As Many As 14 Prongs, De-Soldering And Soldering The Whole Module Takes Serious Skills. We Suggest Replacing The Potentiometers First To Solve Most Of The Joystick Problems. To Desolder The Entire Joystick Module Off Pcb By A Normal Soldering Iron, Please Take A Look At The Desoldering Kit At Product Id: B0bk7169m8.
[When To Replace] – The Analog Joystick Needs To Be Replaced When Your Controller Has The Problem Of Drifting, Creeping, Stuttering, A Blind Spot, A Dead Spot, A Dead Zone, No Reaction When Clicking, Or It Wouldn't Center After Years Of Wear And Tear. The Oem Genuine Repair Parts Ensure Accuracy And Prolong Lifespan.
[Compatibility] – Ps5 Controllers Use Two Kinds Of Joysticks From Two Different Manufacturers. El7 Was Made By Favor Union (Fu), While El6 Was From Alps. The 14 Prongs Were Positioned As The Same. El7 And El6 Are Interchangeable With Each Other.
Features
- [EL7 FU 2.3K for PS5 Controller] 4x replacement analog joystick work with PlayStation 5 DualSense wireless controller. The thumbstick module was made by Favor Union (FU). The stick controller comes with 2.3K trimmer potentiometers in orange color
- [Compatibility] PS5 controllers use two kinds of joysticks from two different manufacturers. EL7 was made by Favor Union (FU), while EL6 was from ALPS. The 14 prongs were positioned as the same. EL7 and EL6 are interchangeable with each other
- [Additional Resistor] Complicated moving mechanism and daily wear and tear finally caused drifting. Even new sensors cannot be 100% balanced. Calibrating in controller settings might not work. We packed 10x correction resistors to solve the potential problem in hardware level. Solder one or two paralleled tiny resistors onto the potentiometer at the opposite direction against drifting. It will help correct 3 to 5 degrees drifting
- [When to replace] The analog joystick needs to be replaced when your controller has the problem of drifting, creeping, stuttering, a blind spot, a dead spot, a dead zone, no reaction when clicking, or it wouldn't center after years of wear and tear. The OEM genuine repair parts ensure accuracy and prolong lifespan
- [Reminder of DIY] With as many as 14 prongs, de-soldering and soldering the whole module takes serious skills. We suggest replacing the potentiometers first to solve most of the joystick problems. To desolder the entire joystick module off PCB by a normal soldering iron, please take a look at the desoldering kit at product ID: B0BK7169M8
- See more on Amazon...
Brand: ElecGear | Manufacturer: ElecGear
See On Amazon #4
ElecGear Joystick Replacement for Oculus Quest, 2X Left & Right Analog Thumb Stick Control Sensor Module for Quest VR Headset Touch Controller with Repair Tool Kit
Asin: B09TKSXTQ6 | Model: EL11-Quest | PartNumber: EL11-Quest
[Reminder Of Operation] – It Takes Serious Skills To Teardown The Vr Controller. Please Follow The Instructions We Included. Pay Attention To How The Spring Was Assembled. In Fact, It’S Not A Spring. Actually, It’S A Wire Connecting The Thumbstick To The Inner Pcb. Make Sure The Connector Of The Spring Base Is Aligned With The Golden Pin Of The Pcb.
The Analog Joystick Sensor Needs To Be Replaced When Your Controller Has The Problem Of Drifting, Creeping, Stuttering, A Blind Spot, A Dead Spot, A Dead Zone, No Reaction When Clicking, Or It Wouldn't Center After Years Of Wear And Tear. All The Necessary Repair Tools Included: 2X Torx Screwdrivers, Plastic Opening Pry Tool, Tweezer And A Diy Scalpel.
Features
- 2 packs of replacement joysticks for Oculus Quest 2 and 1 VR touch controller. This black version is interchangeable with the white version made by another manufacturer. Work with left and right remote control sold with Meta Quest virtual reality headset
- The analog joystick sensor needs to be replaced when your controller has the problem of drifting, creeping, stuttering, a blind spot, a dead spot, a dead zone, no reaction when clicking, or it wouldn't center after years of wear and tear. All the necessary repair tools included: 2x Torx screwdrivers, Plastic opening pry tool, Tweezer and a DIY scalpel
- [Reminder of Operation] It takes serious skills to teardown the VR controller. Please follow the instructions we included. Pay attention to how the spring was assembled. In fact, it s not a spring. Actually, it s a wire connecting the thumbstick to the inner PCB. Make sure the connector of the spring base is aligned with the golden pin of the PCB
- See more on Amazon...
Brand: ElecGear | Manufacturer: ElecGear
See On Amazon #5
ElecGear Joystick Replacement for Switch Joy-con Controller and Switch Lite, Left and Right Thumbsticks, Analog Stick Sensor USB Module with Repair Part Tool included (2x Black)
Asin: B0823Q8QNQ | Model: Joy-con-Stick | PartNumber: Joy-con-Stick | Ean: 0733424230073 | UPC: 733424230073
[Diy Operation] – Replacing Joy-Con Thumbsticks Is Relatively Easy. Dismantle The Usb Controller With Included Tri-Wing, Cross Screwdriver And Plastic Opening Tool. Swap The New Stick For The Problem Ones. Carefully Insert The Flexible Cable In And Close The Socket Cover. Please Remember To Calibrate The New Control Sticks In Settings.
[Determine The Problem] – The Analog Joystick Works With Switch Joycon With The Problem Of Drifting, Creeping, Stuttering, A Blind Spot, A Dead Spot, A Dead Zone, No Reaction When Clicking, Or It Wouldn't Center After Years Of Wear And Tear.
Features
- [Joystick for Switch Joy Con controller] The replacement analog stick works with Nintendo Switch Joy-con controller and Switch Lite console. Three different color options are for your left and right controllers. All the necessary repair tools are included.
- [Determine the problem] The analog joystick works with Switch Joycon with the problem of drifting, creeping, stuttering, a blind spot, a dead spot, a dead zone, no reaction when clicking, or it wouldn't center after years of wear and tear
- [DIY Operation] Replacing Joy-con thumbsticks is relatively easy. Dismantle the USB controller with included tri-wing, cross screwdriver and plastic opening tool. Swap the new stick for the problem ones. Carefully insert the flexible cable in and close the socket cover. Please remember to calibrate the new control sticks in settings
- See more on Amazon...
Brand: ElecGear | Manufacturer: ElecGear
Weight: 0.10 Pounds
See On Amazon #6
ElecGear 8X Joystick Drift Fix Repair Kit for Controller, Solve Thumbsticks Drifting Issue with Correction Variable Resistor for PS5, PS4, Steam Deck, Xbox, Switch Pro, Drone and VR Analog Sticks
Asin: B0BGPCCYH8 | Model: Drift-Kit | PartNumber: Drift-Kit
[4 Pack Of 10K Version] – Works With Analog Sticks With 10Kω Potentiometers Made By Alps, Fu And Other 3Rd Party. Fit Ps4, Ps4 Slim And Pro, Xbox Series S|X, Xbox One S|X, Xbox Elite, Steam Deck, Nintendo Switch Pro And Other Controllers: 8Bitdo, Scuf, Pdp And More. Works With Some Older Controllers: Gamecube, Wii U, Xbox 360 And Ps3 (3Pin). Also Work With Dji And Other Drone Remote Controllers. Make Sure The Problem Joystick Came With 3Pin Sensor And Is Around 10K Ohm.
[Kindly Reminder] – 1. Not All Joysticks Are Compatible With, Check The Compatibility List Before Buying. 2. You Have To Teardown The Controller And Basic Soldering Skills And Tools Needed. 3. The Special Slotted Screwdriver Is For Adjusting The Resistance. 4. Plastic Pry Tool And Cross-Headed Screwdriver Are For Most Controllers, While Special Tools Maybe Needed For Your Specific Controller (Not Included!). 5. Included 4Pcs Of 10Kω And 4Pcs Of 2Kω In The Box.
[Why Stick Drifts?] – Several Factors Cause Joystick Drifting A Common Issue. Even New Joysticks Can Drift Since The Renowned Makers Designed It This Way. 1. The Tiny Mechanical Structure Was Born Without Precision. Alps Reported Tolerance Of 20% On Their Rkjxv Series. 2. Wear To The Wiper And Trimmer Pot Shortens The Given Lifespan 2M Cycles. 3. Spring Fatigue And Material Stretching Made It Not Centered. 4. Not Aligned Soldering Atop Pcb. 5. Dust, Moisture And Drop Make It Worse.
[4 Pack Of 2K Version] – Works With Analog Sticks With 2.1 Or 2.3 Kω Potentiometers Made By Alps, Fu And Other 3Rd Party. Fit Ps5 Dualsense Controllers (Bdm-010, Bdm-020 & Bdm-030), And Some Latest Playstation 4 Pro Dualshock. Make Sure The Problem Joystick Came With 3Pin Sensor And Is Around 2K Ohm. The Left And Right Flex Circuit Board Can Be Cut Into 2 Parts To Avoid The Interference In Case There’Re Electronic Components In The Way.
Features
- [Fix Joystick Drift Issue] If the thumbstick constantly drifts in one direction, you need this add-on flex circuit board for gaming, VR and drone remote controller. The tiny PCB solves the drift in hardware level, simply adjust the variable resistor to eliminate the drifting. ( Not for problem of random drifting, stuck movement, stuttering, blind spot, dead zone or no reaction when clicking. Please turn to ElecGear replacement joysticks or potentiometers instead.)
- [4 pack of 2K Version] Works with analog sticks with 2.1 or 2.3 K potentiometers made by ALPS, FU and other 3rd party. Fit PS5 DualSense controllers (BDM-010, BDM-020 & BDM-030), and some latest PlayStation 4 Pro DualShock. Make sure the problem joystick came with 3Pin sensor and is around 2K ohm. The left and right flex circuit board can be cut into 2 parts to avoid the interference in case there re electronic components in the way
- [4 pack of 10K Version] Works with analog sticks with 10K potentiometers made by ALPS, FU and other 3rd party. Fit PS4, PS4 Slim and Pro, Xbox Series S|X, Xbox One S|X, Xbox Elite, Steam Deck, Nintendo Switch Pro and other controllers: 8Bitdo, Scuf, PDP and more. Works with some older controllers: GameCube, Wii U, Xbox 360 and PS3 (3pin). Also work with DJI and other drone remote controllers. Make sure the problem joystick came with 3Pin sensor and is around 10K ohm
- [Why Stick Drifts?] Several factors cause joystick drifting a common issue. Even new joysticks can drift since the renowned makers designed it this way. 1. The tiny mechanical structure was born without precision. ALPS reported tolerance of 20% on their RKJXV series. 2. Wear to the wiper and trimmer pot shortens the given lifespan 2M cycles. 3. Spring fatigue and material stretching made it not centered. 4. Not aligned soldering atop PCB. 5. Dust, moisture and drop make it worse
- [Kindly Reminder] 1. Not all joysticks are compatible with, check the compatibility list before buying. 2. You have to teardown the controller and basic soldering skills and tools needed. 3. The special slotted screwdriver is for adjusting the resistance. 4. Plastic pry tool and cross-headed screwdriver are for most controllers, while special tools maybe needed for your specific controller (Not included!). 5. Included 4PCs of 10K and 4PCs of 2K in the box
- See more on Amazon...
Brand: ElecGear | Manufacturer: ElecGear
Warranty: 30days of FBA service
See On Amazon #7
ElecGear Hall Joystick Kit Replacement for Xbox One & Series S|X Controller, 2x Hall Effect Control Stick + 2x Calibration PCB + Desoldering Repair Tools for Analog Stick Thumbsticks HL-XB
Asin: B0CYBWQWTB | Model: HL-Xbox | PartNumber: HL-Xbox
[Desoldering Tools Included] – A Copper Heating Plate Melts All The Solder Joints Simultaneously Simply With A Soldering Iron. Solder Wick, Holes Cleaner And Simple Pcb Holder Included. With As Many As 14 Prongs, Removing The Old Problem Stick Is The Most Difficult Task. It Might Is Not Suitable For Newbies, Though We Added These Helping Hand In The Kit.
[What’S In Box Model: Hl-Xb] – 2X Hall Joysticks, 2X Calibration Pcb, 1X Heating Plate, 1X Solder Wick, 1X Hole Cleaning Tubes. (🔺Teardown Screwdriver Tools, Usb Wired/Wireless Controllers, Other Soldering Tools And Materials Are Required, However Not Included.).
[Compatibility And Reminder] – 1. Please Carefully Study The Images For Compatible Controller. 2. The Soldering Iron Must Be More Than 60W. And The Operation Takes Serious Soldering Skill And Devices To Desolder The Old Stick Off The Pcb. 3. Seriously Follow The Steps We Presented On The Installation Guide For This Kit Is Novel And Tricky.
[2X Added-On Calibration Pcb] – The Tiny Pcb Was Designed To Stack On The Back Of Main Board. The Moving Signal Is Input To The High Speed Mcu. The Calibrated Signal Outputs To The Main Board Of Controller. Connect The Controller To A Pc With A Usb Cable. You Can Fine Reset The Center And Trim The Curve Via A Web Link. The Accurate Centering With No Drift Is Essential For Fps Aiming.
Features
- [2x Hall Joysticks Replacement for Xbox] Hall thumbsticks work with Xbox One, One S|X, Elite 1 and Series S|X controller. With the electromagnetic hall Effect sensors inside, the control stick delivers higher sensitivity and accuracy. No more wear of traditional carbon film resistor, say goodbye to drifting. Made from durable material with excellent rocking structure, it provides smoother movement and longer lifespan
- [2x Added-on Calibration PCB] The tiny PCB was designed to stack on the back of main board. The moving signal is input to the high speed MCU. The calibrated signal outputs to the main board of controller. Connect the controller to a PC with a USB cable. You can fine reset the center and trim the curve via a web link. The accurate centering with no drift is essential for FPS aiming
- [Desoldering Tools included] A copper heating plate melts all the solder joints simultaneously simply with a soldering iron. Solder Wick, Holes Cleaner and simple PCB holder included. With as many as 14 prongs, removing the old problem stick is the most difficult task. It might is not suitable for newbies, though we added these helping hand in the kit
- [Compatibility and Reminder] 1. Please carefully study the images for compatible controller. 2. The soldering iron must be more than 60W. And the operation takes serious soldering skill and devices to desolder the old stick off the PCB. 3. Seriously follow the steps we presented on the installation guide for this kit is novel and tricky
- [What s in box Model: HL-XB] 2x Hall Joysticks, 2x Calibration PCB, 1x Heating Plate, 1x Solder Wick, 1x Hole Cleaning Tubes. ( Teardown screwdriver tools, USB wired/wireless controllers, Other soldering tools and materials are required, however NOT included.)
- See more on Amazon...
Brand: ElecGear | Manufacturer: ElecGear
Warranty: 30days of Amazon FBA service
See On Amazon #8
Logitech G Extreme 3D Pro USB Joystick for Windows - Black/Silver
Asin: B00009OY9U | Model: 963290-0403 | PartNumber: 963290-0403
Ean: 5053086062733, 0791398266108, 0667562733038, 0704121322903, 0097855018113, 0861835582228, 0809185291933, 0808111635599, 0801940081438, 0795468605743, 0720053691641, 0999998484452, 0033584226610, 0041114200733, 5099206041912, 0809385141656, 5554442356294, 0805100127332, 0631058181511, 0012304286462, 7290105135629, 0080850219166, 0806293900030, 8856623446518, 0803982745088, 0804067292343, 0872182616276, 0806298680890, 0806300034765, 0710069193208, 0801940442697, 5554442448074, 0806298089570, 7887117161090, 7044447803063, 0999994106358, 0999993136257, 0071020242879, 0806299806473, 0734911297777, 0759309500543
UPC: 872182616276, 012304286462, 033584226610, 806293900030, 710069193208, 806298089570, 080850219166, 804067292343, 806300034765, 801940442697, 861835582228, 999993136257, 999994106358, 071020242879, 097855018113, 759309500543, 801940081438, 734911297777, 809385141656, 791398266108, 808111635599, 806299806473, 806298680890, 809185291933, 041114200733, 803982745088, 805100127332, 704121322903, 795468605743, 720053691641, 631058181511, 999998484452, 667562733038
8-Way Hat Switch: The Logitech Extreme 3D Pro Precision Fightstick Is Designed To Accurately Capture Specialised Input Specific To Flight Sims.
Comfortable Hand Grip: Sculpted Curves Support The Natural Shape And Position Of Your Palm And Fingers For Hours Of Comfortable Flying.
Compatible With Windows 8, Windows 7 Or Windows Vista Only. Not Compatible With Newer Versions Of Windows..
Rapid-Fire Trigger: Lock On And Let Loose. Pull The Trigger As Fast As You Want, Confident That Every Twitch Of Your Finger Will Be Captured Without Missing A Beat.
12 Programmable Buttons: Easily Configure Each Button Of This Controller To Execute Simple Single Commands Or Intricate Macros Involving Multiple Keystrokes, Mouse Events And More.
Features
- Logitech Exreme 3D Pro Joystick, Take Control: With advanced controls and a custom twist-handle rudder, this joystick is stable and precise whether you re dropping bombs or firing guns
- 12 Programmable Buttons: Easily configure each button of this controller to execute simple single commands or intricate macros involving multiple keystrokes, mouse events and more
- 8-way Hat Switch: The Logitech Extreme 3D Pro Precision Fightstick is designed to accurately capture specialised input specific to flight sims
- Rapid-fire Trigger: Lock on and let loose. Pull the trigger as fast as you want, confident that every twitch of your finger will be captured without missing a beat
- Comfortable Hand Grip: Sculpted curves support the natural shape and position of your palm and fingers for hours of comfortable flying
- Compatible with Windows 8, Windows 7 or Windows Vista only. Not compatible with newer versions of Windows.
- See more on Amazon...
Brand: Logitech G | Manufacturer: Logitech
Dimensions: 8.40 x 9.20 x 8.80 inches | Weight: 2.20 pounds
Warranty: 1 Year Limited Hardware Warranty
See On Amazon #9
2-Pack Replacement Joystick Analog Thumb Stick Repair Kit for Nintendo Switch/Switch OLED Model/Switch Lite Joy-Con Controller - Drift Fix Tools Y1.5 / +1.5 Screwdriver/Pry Tools
Asin: B07MRJ12HX | Ean: 6165438853865
Complete Tool Set To Finish The Repair, This Is The Perfect Solution To Make Your Controller Working Like New Again. No Need To Spend $80 For A Brand New Controller. Package Inlude The "Y1.5" Screwdriver And "+1.5" Cross Screwdriver Repair Tools, Tweezers, And Pry Tools..
We Back On Our Products! If You Are Not Satisfied With Your Purchase Within 90 Days, Please Feel Free To Contact Us. We Will Reply You Within 24 Hours..
Note: Please Calibrate The Joy-Con By Using Nintendo Switch Setting After Installation..
True Oem And High Quality Joystick Replacement Fixing The Joy-Con Drift, Stuttering, Blind Spots, Dead Zones, No Click, Non-Centered Issues, Bring Your Controller Back To Life..
Features
- The Joycon Replacement Joystick works for the Joycon controller of Nintendo Switch (2017 Release), Nintendo Switch lite (2019 Release) and Ninetndo Switch OLED Model (2021 Release)
- TRUE OEM and High Quality joystick replacement fixing the Joy-Con drift, stuttering, blind spots, dead zones, no click, non-centered issues, bring your controller back to life.
- Complete tool set to finish the repair, this is the perfect solution to make your controller working like new again. No need to spend $80 for a brand new controller. Package inlude the Y1.5 Screwdriver and +1.5 Cross Screwdriver repair tools, tweezers, and pry tools.
- NOTE: Please Calibrate the Joy-Con by Using Nintendo Switch Setting After Installation.
- We back on our products! If you are not satisfied with your purchase within 90 days, please feel free to contact us. We will reply you within 24 hours.
- See more on Amazon...
Brand: Veanic | Manufacturer: Veanic
See On Amazon
Looking For Something Else?
Search