FYSETC Ender 2 Pro Dual Size PEI Sheet Kit 165x165mm/6.5x6.5inch: Textured - Smooth PEI Surface+Sticker Bottom Removable Spring Steel Heated Bed Cover for Adventure 3/ LuzBot Mini 2 Desktop 3D Printer
Asin: B0BVHL3ND1
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Easy To Use: Simply Stick The Sticker Bottom Sheet Onto Your Heated Bed, Then Place The Steel Platform On The Top. Both Sides Can Be Used To Print, Convenient. The Smooth Pei Sheet Is Pre-Sticked By Machine, No Worry About The Bubbles, Please Peel Off The Profective Film On The Pei Surface Before Using. Recommend Printing Abs On The Textured Side..
Good Quality: Flexible, Removable, High Strength And Heat Resistance, Three-Layer Design, Thicker And More Durable. Easily Handle Temperatures Up To 130°C. And Perfect For Pla, Peek, Abs. Note: The Adaptation Temperature Of Different Materials Is Different, Please Adjust It Reasonably..
Proven Solution: No Glue, No Tap, When Hotbed Temperature Reaches 60℃ ,Materials Such As Pla Abs Will Stick Well, And After Printing, Prints Come Off The Surface Easily When The Temperature Of The Heated Bed Reaches Room Temperature..
Practical Features: Size:165 X 165Mm/6.5X6.5 Inch Is Compatible With Flashfoge Adventure 3(Monprice Voxel)/Ender 2 Pro/Luzbot Mini 2 Desktop 3D Printer Or The Same Size Other 3D Printers.Please Note: Don't Refer To Your Build Volume Which Is 5-10Mm Smaller Than That Of The Real Hotbed. It Would Be Better To Remeasure Your Hotbed Before Ordering!.
Features
- Special Design: An upgraded Replacement printing platform for glass plate --JanusBPS 165x165mm/6.5x6.5inch. This steel plate is Double-Side Coated, one side with Golden Powder, another with a Smooth PEI pre-sticked, comes with a sticker base. You can get 2 different experience on one steel plate just by flipping it over.
- Practical Features: Size:165 x 165mm/6.5x6.5 inch is compatible with FlashFoge Adventure 3(Monprice Voxel)/Ender 2 pro/LuzBot Mini 2 Desktop 3D Printer or the same size other 3D printers.Please note: DON'T refer to your build volume which is 5-10mm smaller than that of the real hotbed. It would be better to remeasure your hotbed before ordering!
- Easy to use: Simply stick the sticker bottom sheet onto your heated bed, then place the steel platform on the top. Both sides can be used to print, convenient. The smooth pei sheet is pre-sticked by machine, no worry about the bubbles, please peel off the profective film on the pei surface before using. Recommend printing ABS on the textured side.
- Proven Solution: No glue, No tap, when hotbed temperature reaches 60 ,materials such as PLA ABS will stick well, and after printing, prints come off the surface easily when the temperature of the heated bed reaches room temperature.
- Good Quality: Flexible, removable, high strength and heat resistance, Three-Layer design, thicker and more durable. Easily handle temperatures up to 130 C. And perfect for PLA, PEEK, ABS. Note: The adaptation temperature of different materials is different, please adjust it reasonably.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
Dimensions: 0.02 x 6.50 x 6.50 inches
See On Amazon Similar To FYSETC Ender 2 Pro Dual
#1
Creality Upgrade Ender 3 Extruder, Ender 3 V2 Upgrades Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Ender 3 Pro/Ender 5 Pro/Ender 5 Plus/CR-10 Series 3D Printer
Asin: B07WHYBVJ5 | Ean: 6973298330811
Work Better. It Makes Loading The Filament Easier And Smoother, No Worries About Filament Scraping Or Breaking..
Easy To Install. This Extruder Diy Kit Comes With An Instruction Of How To Put It Together, Which Makes It More Easy To Install..
Fits 1.75Mm Filament. 40 Teeth Drive Gear Compatible With Pla/Abs/Wood/Tpu/Pteg. Please Note: Some Printer Models Like Ender 3 And Edner 3 Pro, Their Original Extrusion Gears Cannot Be Removed, So These Model Printers Do Not Have To Change The Extrusion Screw. Ender 3V2，Its Extrusion Gear Can Be Replaced..
Last Over Years. Made By High Quality Aluminum, Last Much Longer Your Stock Plastic Or 3D Printed Extruder Feeder Drive..
Features
- Compatibility: This Upgraded 3d printer accessories is an original upgraded replacement part for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender 5, Ender 5 Plus, Ender 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR 10, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR-X, CR 20, CR 20 Pro. It is also compatible with other 3D printers except the printers using a direct drive setup. No need to change stepper motors or other mounting hardware.
- Last Over Years. Made by high quality aluminum, last much longer your stock plastic or 3D printed extruder feeder drive.
- Work Better. It makes loading the filament easier and smoother, no worries about filament scraping or breaking.
- Fits 1.75mm filament. 40 Teeth drive gear compatible with PLA/ABS/Wood/TPU/PTEG. Please Note: Some printer models like Ender 3 and Edner 3 Pro, their original extrusion gears cannot be removed, so these model printers do not have to change the extrusion screw. Ender 3V2 its extrusion gear can be replaced.
- Easy to Install. This extruder DIY kit comes with an instruction of how to put it together, which makes it more easy to install.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #2
Creality Ender 3 /Pro/V2 3D Printer Assembled Extruder MK8 HotEnd Kit 24V with 0.4mm Nozzle Upgrade with Low Friction Creality-Capricorn Tubing
Asin: B07WNQP916 | Model: ENO-Ender3-Hotend-Bluetube | PartNumber: ENO-Ender3-Hotend-Bluetube | Ean: 0705300791497, 0198549003108 | UPC: 705300791497, 198549003108
Hotend Replacement Parts Suitable For Ender 3, Ender-3X, Ender-3 Pro, Ender 3 V2 3D Printer..
Creality-Capricorn Tube Is Far Superior To The White Ptfe Tubing Supplied With Most 3D Printers. Its Much Smoother To Feed Filament Through. And When Printing It Reduces The Drag On The Extruder Giving A Much Smoother Travel And Print Quality..
High Lubricity Additives Make Our Xs Series Tubing The Lowest Friction Bowden Tubing On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills. Lower Retraction Means Time Saved Every Time The Extruder Retracts. Over The Course Of A Print, A Few Milliseconds Here And A Few There Add Up To A Lot Of Time Saved..
Upgrade With Low Friction Creality-Capricorn Original Teflon Tube 40Cm..
Features
- It's 100% Creality Original and Creality-Capricorn PTFE Tubing.
- Upgrade with Low Friction Creality-Capricorn Original Teflon Tube 40CM.
- Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro, Ender 3 V2 3d printer.
- High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills. Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved.
- Creality-Capricorn tube is far superior to the white PTFE tubing supplied with most 3D printers. Its much smoother to feed filament through. And when printing it reduces the drag on the extruder giving a much smoother travel and print quality.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #3
Creality Upgrade Ender 3 Hotend, Assembled Extruder with Capricorn Bowden PTFE Tubing for Creality Ender 3 Pro/Ender 3 V2 with Silicone Cover 3, 0.4mm Ender 3 Nozzle 3 and 2 Pair Pneumatic Couplers
Asin: B082PGCF2B | Model: ENDER3-PT | PartNumber: ENDER3-PT
Pluggable: The Heating Tube And Temperature Thermistor That From Control Box, Connect Them With Terminal Housing And Pin. Then You Could Plug The Hotend Kit, Easier To Replace Hotend Kit..
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Braided Wire Was Heating Tube 24V40w..
With More Terminal Housing And Pins As Spare Parts, In Case Fail Installation And Waste..
Original Capricorn Xs Serious Bowden Ptfe Tubing With Lowest Friction On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills..
Features
- It's 100% Creality Original Upgrade Assembled Extruder Hotend.
- Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
- Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
- With more terminal housing and pins as spare parts, in case fail installation and waste.
- MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Weight: 0.30 pounds
See On Amazon #4
Ender 3 Hotend, Authentic Creality Assembled Hotend Kit 3D Printer Parts with 5X 0.4mm Nozzles for Ender 3 Ender 3 V2 and Ender 3 Pro
Asin: B082XXRT78 | Model: Sprinkler Kit -01 | PartNumber: Sprinkler Kit -01 | Ean: 8711459631234
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Braided Wire Was Heating Tube 24V 40W. Tip Of The Nozzle, Aluminum Heating Block, Throat Pipe (Built-In Teflon)..
Silicone Cover Is Provided To Help Keep Temperatures On The Hotend Much More Stable And This Will Result In Higher Print Quality And Consistency..
Five 0.4Mm Brass Nozzle Are Included In This Hotend Kit. This Kit Can Work With Different Sizes Of Mk8 Nozzle: 0.2Mm/0.3Mm/0.4Mm/0.5Mm /0.6Mm/0.8Mm/1.0Mm..
Pluggable: The Heating Tube And Temperature Thermistor That From Control Box, Connect Them With Terminal Housing And Pin. Then You Could Plug The Hotend Kit, Easier To Replace Hotend Kit..
Features
- Compatibility: 100% Creality Original. This assembled hotend kit from Creality is a plug and play replacement for Ender 3/ Ender 3 V2 /Ender 3 Pro/ Ender 3S.
- Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
- MK8 extruder hot end kit, white wire was temperature thermistor, braided wire was heating tube 24V 40W. Tip of the nozzle, aluminum heating block, throat pipe (built-in teflon).
- Five 0.4mm brass nozzle are included in this hotend kit. This kit can work with different sizes of MK8 nozzle: 0.2mm/0.3mm/0.4mm/0.5mm /0.6mm/0.8mm/1.0mm.
- Silicone Cover is provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and consistency.
- See more on Amazon...
Brand: ORTHLAND | Manufacturer: Orthland
See On Amazon #5
Creality 3D Official Printer Ender 3 Dual Z-axis Upgrade Kit with Lead Screw, Metal Power Supply Holder and Stepper Motor, 3D Printer Ugrades Kit for Ender 3, Ender 3 Pro, Ender 3 V2
Asin: B09N8QQDSP | Model: CREALITYENDER3DUALZ | PartNumber: CREALITYENDER3DUALZ
【Smooth Running】 Upgrade Single Z-Axis Structure To A Dual Z-Axis Structure, Will Make The Printer More Easy To Leveling, Both Ends Of The X Axis Are Raised And Lowered Synchronously, Which Reduces Difficulty And Frequency Of Bed Leveling Obviously..
【After Sales Service】Creality 3D Pay Great Attention To The Buyer’S User Experience. If You Have Unsolvable Problems During Installation And Use, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
【High Comparable】The Dual Z Axis Upgrade Kit Is Compatible With Ender 3/ Ender 3 Pro/ Ender 3 V2/Ender 3 Neo/Ender 3 V2 Neo 3D Printer. Easily Improve 3D Printers With Low Cost Efficiency To Dual Z Axis Mode..
【Stable Performance】 Compared With Closed Timing Belt, This 3D Printer Parts Set Still Retains The Design Of Stepper Motor To Ensure Screw Rod Smooth Operation..
Features
- Increased Accuracy Compared with original structure, dual Z-axis kit reduces the layer ripple caused by Z-axis vibration, avoiding backlog of filament thoroughly, which improves stability of 3D printing and increases the printing performance of 3D printer.
- Stable Performance Compared with Closed Timing Belt, this 3D printer parts set still retains the design of stepper motor to ensure screw rod smooth operation.
- Smooth Running Upgrade Single Z-axis structure to a dual Z-axis structure, will make the printer more easy to Leveling, both ends of the X axis are raised and lowered synchronously, which reduces difficulty and frequency of bed leveling obviously.
- High Comparable The dual z axis upgrade kit is compatible with Ender 3/ Ender 3 Pro/ Ender 3 V2/Ender 3 Neo/Ender 3 V2 Neo 3D printer. Easily improve 3D printers with low cost efficiency to Dual Z axis mode.
- After Sales Service Creality 3D pay great attention to the buyer s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 2.56 x 3.94 x 15.55 inches | Weight: 2.01 pounds
See On Amazon #6
Redrex Dual Gear Ender 3 Extruder with Two Washers Metal Drive Feeder Upgrade Kit Compatible with Creality Ender 3 V2 Pro,Ender 3 Neo Series,CR10 3D Printer TPU Filament Supported(Motor Shaft>21.5mm)
Asin: B09H6T3NNT | Model: RDX3D032 | PartNumber: RDX3D032
【Spring Adjustable Extruder】The Extrusion Spring Tension Could Be Adjusted By Tighten The Screw,Which Greatly Improves The Printing Accuracy And Feeding Issue..
【Kindly Reminder】:Please Calibrate The E-Steps From 100 To 139; Please Lubricate The Gears Before First Use;For 3D Printers With Filament Detector,As The Height Of Our Dual Gear Extruder May Be Different From The Original One, Please Print The Model To Rise Up The Filament Detector To Make Them At The Same Height;For Vyper Users,Please Swap The Motor Wire Sequence To Make It Turn Forward Instead Of Reverse.
【Application】:This All Metal Dual Drive Extruder Is Compatible With Ender 3 V2,Ender 3 Pro,Ender 3,Ender 3 Neo,Ender 3 V2 Neo,Ender 3 Max Neo,Ender 5 Pro,Cr10 S Series 3D Printer.Only Suit For 3D Printers With Motor Shaft Over 20Mm,Please Measure The Shaft Length Before Placing The Order..
【Upgraded Idler Gear Design】This Idler Gear Is Upgraded With Two Washers On Both Sides, So The Sharp Gear Will Not Ride Against The Bottom Of The Arm Or Chew It Up..
Features
- Double Gear Extrusion Mechanism :The filament is gripped by the dual drive much more firmly with less deformation, so it doesn't jam as much in the tube, nozzle or hotend.
- Upgraded Idler Gear Design This idler gear is upgraded with two washers on both sides, so the sharp gear will NOT ride against the bottom of the arm or chew it up.
- Spring Adjustable Extruder The extrusion spring tension could be adjusted by tighten the screw,which greatly improves the printing accuracy and feeding issue.
- Application :This all metal dual drive extruder is compatible with Ender 3 V2,Ender 3 Pro,Ender 3,Ender 3 Neo,Ender 3 V2 Neo,Ender 3 Max Neo,Ender 5 Pro,CR10 S series 3D printer.ONLY suit for 3d printers with motor shaft over 20mm,please measure the shaft length before placing the order.
- Kindly Reminder :Please calibrate the E-steps from 100 to 139; Please lubricate the gears before first use;for 3d printers with filament detector,as the height of our dual gear extruder may be different from the original one, please print the model to rise up the filament detector to make them at the same height;for Vyper users,please swap the motor wire sequence to make it turn forward instead of reverse
- See more on Amazon...
Brand: REDREX | Manufacturer: Redrex
Dimensions: 1.96 x 0.98 x 2.20 inches | Weight: 0.13 pounds
See On Amazon #7
Official Creality Ender 3 Dual Z-axis Upgrade Kit with Lead Screw, Stepper Motor and Metal Power Supply Holder, Ender 3 pro upgrades for Ender 3/ Ender 3 Pro/Ender 3 V2
Asin: B07VJG4ZCG
Dustproof And Mute Design - Elaborate Craft, Good Sealing Performance, Good Dust-Proof Smooth Sliding, And Maximum Mute In High-Speed Operation..
After-Sales Service - If You Have Any Unsolvable Problems During Installation And Use The Ender 3 Pro Dual Z-Axis Upgrade Kit, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
Smooth Running - Upgrading The Single Z-Axis Structure To A Dual Z-Axis Structure Will Make The Printer Easier To Leveling, Both Ends Of The X-Axis Are Raised And Lowered Synchronously, Which Reduces The Difficulty And Frequency Of Bed Leveling Obviously..
Excellent Performance - With An Upgraded Structure, The Ender 3 Dual Z-Axis Upgrade Kit Reduces The Layer Ripple Caused By Z-Axis Vibration, Avoiding Backlog Of Filament Thoroughly, Which Improves The Stability And Increases The Printing Performance Of The 3D Printers. The Ender 3 Pro Upgrade Is Compatible With Ender 3/ Ender 3 Pro/ Ender 3 V2 3D Printer..
Features
- Precise and Smooth Screw - Well made motor is efficient and reliable with high speed and low noise. The guide rail precision is P3-P7. The repeated positioning accuracy reaches 0.01mm. High loading ability and high running speed meet the high-speed running requirement.
- Excellent Performance - With an upgraded structure, the ender 3 dual z-axis upgrade kit reduces the layer ripple caused by Z-axis vibration, avoiding backlog of filament thoroughly, which improves the stability and increases the printing performance of the 3D printers. The ender 3 pro upgrade is compatible with Ender 3/ Ender 3 Pro/ Ender 3 V2 3D printer.
- Dustproof and Mute Design - Elaborate craft, good sealing performance, good dust-proof smooth sliding, and maximum mute in high-speed operation.
- Smooth Running - Upgrading the Single Z-axis structure to a dual Z-axis structure will make the printer easier to Leveling, both ends of the X-axis are raised and lowered synchronously, which reduces the difficulty and frequency of bed leveling obviously.
- After-Sales Service - If you have any unsolvable problems during installation and use the ender 3 pro dual z-axis upgrade kit, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #8
Official Creality Original Ender 3 V2 Full Assembled Hotend Kit, All Assembled Nozzle Kit with Dual Fans and ABS Shell for Ender-3 V2
Asin: B09NKWJ35T | Model: Ender 3 V2 Fully Hotend Kit | PartNumber: Ender 3 V2 Fully Hotend Kit
【Effective Heating And Cooling System】: It Has Heating Block And Heat Sink And Dual Fan For Cooling. The Heating Block With Insulating Silicone Cover Keeps The Temperature Stable And Ensures Even Printing. The Design With Two Fans Makes Heat Dissipation More Even, Solidifies The Model Quickly And Ensures Precise Printing.
【After Sales Service】Creality Pays Great Attention To The Buyer’S User Experience. If You Have Unsolvable Problems During Installation And Use, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
【Easy Installation】The Kit Is Assembled Before Delivery, Which Means It's Quite Easy To Install Even If You Are A Beginner Of 3D Printing. You Can According The Video On The Product Page To Install It..
【Integrated Structure】: The Integrated Structure And Simple Wiring Are Convenient For Disassembly, Repair And Assembly. Abs+ Pc Injection Cover Anodised For Robust And More Portable..
Features
- Quality Assurance The fully assembled extruder kit is 100% original and high quality 3D printer accessory for Creality Ender-3 V2.
- Integrated Structure : The integrated structure and simple wiring are convenient for disassembly, repair and assembly. ABS+ PC injection cover anodised for robust and more portable.
- Effective heating and cooling system : It has heating block and heat sink and dual fan for cooling. The heating block with insulating silicone cover keeps the temperature stable and ensures even printing. The design with two fans makes heat dissipation more even, solidifies the model quickly and ensures precise printing
- Easy Installation The kit is assembled before delivery, which means it's quite easy to install even if you are a beginner of 3D printing. You can according the video on the product page to install it.
- After Sales Service Creality pays great attention to the buyer s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #9
Creality Original Ender 3 Full Assembled Hotend Set, Replacement Full Assemble Hotend Kit with Mental Shell and Dual Fan for Ender 3 / Ender 3S/ Ender 3 Pro
Asin: B0C85CPXS7
【Easy Installation】The Kit Is Assembled Before Delivery, Which Means It's Quite Easy To Install Even If You Are A Beginner Of 3D Printing. You Can According The Video On The Product Page To Install It..
【After Sales Service】Creality Pays Great Attention To The Buyer’S User Experience. If You Have Unsolvable Problems During Installation And Use, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
【High Quality Silicone Case】The Non-Stick Silicone Cover Keeps The Hotend Temperature Extremely Stable And What's More, The Extruder Looks Clean And Tidy..
【Effective Heating And Cooling System】 It Has Heating Block And Heat Sink And Dual Fan For Cooling. The Heating Block With Insulating Silicone Cover Keeps The Temperature Stable And Ensures Even Printing. The Design With Two Fans Makes Heat Dissipation More Even, Solidifies The Model Quickly And Ensures Precise Printing.
Features
- Quality Assurance The Ender 3 hotend extruder kit and accessories are all original and high quality from 100% quality assurance. Suitable for Creality Ender 3 / Ender 3S/ Ender 3 Pro
- Effective heating and cooling system It has heating block and heat sink and dual fan for cooling. The heating block with insulating silicone cover keeps the temperature stable and ensures even printing. The design with two fans makes heat dissipation more even, solidifies the model quickly and ensures precise printing
- Easy Installation The kit is assembled before delivery, which means it's quite easy to install even if you are a beginner of 3D printing. You can according the video on the product page to install it.
- High Quality Silicone Case The non-stick silicone cover keeps the hotend temperature extremely stable and what's more, the extruder looks clean and tidy.
- After Sales Service Creality pays great attention to the buyer s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality
See On Amazon #10
3D Printer Parts Ender 3 Hotend Assembled Ender 3 Pro Extruder Kit 24V 40W for Creality Ender 3 / Ender 3 Pro/Ender 3 V2 with Silicon Cover and 0.4mm Nozzles
Asin: B07H8TSM95 | Model: Ender 3-Extruder | PartNumber: Ender 3-Extruder | Ean: 0608410981676 | UPC: 608410981676
Ender 3 Extruder Hot End Can Work With Different Size Mk8 Nozzle: 0.2Mm 0.3Mm 0.4Mm 0.5Mm 0.6Mm 0.8Mm 1.0Mm Nozzle.
Tip Of Nozzle, Aluminum Heating Block, Throat Pipe (Built-In Teflon).
Mk8 Extruder Hot End Kits,White Wire Was Temperature Thermistor, Black Wire Was Heating Tube 24V 40W.
5 Pieces 0.4Mm 3D Printers Nozzles As Gift..
Features
- ENDER 3 EXTRUDER is 100% ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT.
- 5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT.
- ENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE
- MK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W
- TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON)
- See more on Amazon...
Brand: RICHOOSE | Manufacturer: Creality 3D
See On Amazon
Looking For Something Else?
Search