ChillWaves 1/2" NPT Brass Pipe Fitting Kit, 6 1/2" NPT Male Hex Nipple 6 1/2" NPT Female Hex Coupling Thread Adapter 12-PACK
Asin: B0BW9MVMZ8
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Use - It Is Used To Connect Male And Female Threaded Pipe Fittings Of The Same Diameter Or To Extend The Length Of Pipes. It Is A Pipe Fitting Specially Used For Pipe Connection Engineering. It Is Suitable For Most Gases, Water, Oils And Corrosive Liquids..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These Brass Fittings Are Low In Lead But Not Suitable For Drinking Water..
Working Pressure & Temperature - 1200Psi Maximum Working Pressure, Temperature Range -65°F To +250°F (-53°C To +121°C).
Material - Made Of High-Quality Brass, With Strong Wear And Corrosion Resistance, High Compressive Strength, Durability, Low Magnetic Permeability And High Temperature Ductility..
Features
- SIZE - 1/2" NPT Male Hex Nipple&1/2" NPT Female Hex Coupling. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
- Use - It is used to connect male and female threaded pipe fittings of the same diameter or to extend the length of pipes. It is a pipe fitting specially used for pipe connection engineering. It is suitable for most gases, water, oils and corrosive liquids.
- WORKING PRESSURE & TEMPERATURE - 1200PSI maximum working pressure, temperature range -65 F to +250 F (-53 C to +121 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these brass fittings are low in lead but not suitable for drinking water.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon Similar To ChillWaves 1 2 NPT Brass
#1
ChillWaves Brass Air Hose Fittings, Hose Barb Fittings 1/2" Barb x 1/2" NPT Male Thread Adapter with Hose Clamp(6-PACK)
Asin: B0B752NYY1 | Model: CWJX041 | PartNumber: CWJX041
Use - The Barbed End Is Used To Connect Flexible Hose Or Tubing, The Npt End Is Used To Connect To Threaded Pipe Fittings, And Can Be Used With Pvc, Pu, Rubber Hose Or Tubing. It Is A Pipe Fitting Specially Used For Pipe Connection Engineering. It Is Suitable For Most Gases, Water, Oils And Corrosive Liquids..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These Brass Fittings Are Low In Lead But Not Suitable For Drinking Water..
Working Pressure & Temperature - 1200Psi Maximum Working Pressure, Temperature Range -65°F To +250°F (-53°C To +121°C).
Material - Made Of High-Quality Brass, With Strong Wear And Corrosion Resistance, High Compressive Strength, Durability, Low Magnetic Permeability And High Temperature Ductility..
Features
- SIZE - 1/2" Barb x 1/2" NPT Male Hose Barb Fitting. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
- Use - The barbed end is used to connect flexible hose or tubing, the NPT end is used to connect to threaded pipe fittings, and can be used with PVC, PU, rubber hose or tubing. It is a pipe fitting specially used for pipe connection engineering. It is suitable for most gases, water, oils and corrosive liquids.
- WORKING PRESSURE & TEMPERATURE - 1200PSI maximum working pressure, temperature range -65 F to +250 F (-53 C to +121 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these brass fittings are low in lead but not suitable for drinking water.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #2
ChillWaves Brass Pipe Fitting, Reducer Hex Bushing 1/2" NPT Male x 1/4" NPT Female Thread Adapter(12-PACK)
Asin: B0B758BX7F | Model: CWJX003 | PartNumber: CWJX003
Use - Used To Connect Female And Male Threaded Pipes Or Fittings Of Different Diameters. It Is A Fitting Specially Used In Pipeline Connection Engineering. It Is Suitable For Most Gases, Water, Oil And Corrosive Liquids..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These Brass Fittings Are Low In Lead But Not Suitable For Drinking Water..
Working Pressure & Temperature - 1200Psi Maximum Working Pressure, Temperature Range -65°F To +250°F (-53°C To +121°C).
Material - Made Of High-Quality Brass, With Strong Wear And Corrosion Resistance, High Compressive Strength, Durability, Low Magnetic Permeability And High Temperature Ductility..
Features
- SIZE - 1/2" NPT Male x 1/4" NPT Female Hex Bushing. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
- Use - Used to connect female and male threaded pipes or fittings of different diameters. It is a fitting specially used in pipeline connection engineering. It is suitable for most gases, water, oil and corrosive liquids.
- WORKING PRESSURE & TEMPERATURE - 1200PSI maximum working pressure, temperature range -65 F to +250 F (-53 C to +121 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these brass fittings are low in lead but not suitable for drinking water.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #3
ChillWaves Brass Compression Tube Fitting, 1/2" OD x 1/2" OD Compression Union Connector(5-PACK)
Asin: B0BDGMJCPH | Model: CWJX063 | PartNumber: CWJX063
Use - Suitable For Oil, Gas, Water And Other Non-Corrosive Or Corrosive Pipeline Systems, Temperature And Pressure Resistance, Good Sealing And Repeatability, No Need For Welding And Flaring Tools, Easy Disassembly, Installation And Maintenance, Etc..
Working Principle - Compression Tube Fitting Is To Compress The Ferrule By Thread Interlocking, And The Two Ends Of The Inner Diameter Of The Ferrule Tightly Wrap The Tube Due To Radial Shrinkage, Which Plays A Sealing Role And Realizes The Sealing And Tightening Effect Between The Joint And The Tube..
Working Pressure & Temperature - 1200Psi Maximum Working Pressure, Temperature Range -65°F To +250°F (-53°C To +121°C).
Material - Made Of High-Quality Brass, With Strong Wear And Corrosion Resistance, High Compressive Strength, Durability, Low Magnetic Permeability And High Temperature Ductility..
Features
- SIZE - 1/2" Tube OD x 1/2" Tube OD, Compression Tube Fitting mainly consists of a fitting body with a 24 degree tapered hole, a ferrule with a sharp inner edge, and a nut for compression.
- MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
- Use - Suitable for oil, gas, water and other non-corrosive or corrosive pipeline systems, temperature and pressure resistance, good sealing and repeatability, no need for welding and flaring tools, easy disassembly, installation and maintenance, etc.
- WORKING PRESSURE & TEMPERATURE - 1200PSI maximum working pressure, temperature range -65 F to +250 F (-53 C to +121 C)
- WORKING PRINCIPLE - Compression Tube Fitting is to compress the ferrule by thread interlocking, and the two ends of the inner diameter of the ferrule tightly wrap the tube due to radial shrinkage, which plays a sealing role and realizes the sealing and tightening effect between the joint and the tube.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #4
ChillWaves 304 Stainless Steel Pipe Fitting, Reducer Hex Bushing 1/2" NPT Male x 1/4" NPT Female Thread Adapter(6-PACK)
Asin: B0CDTB6DGD | Model: CWJX151D | PartNumber: CWJX151D
Use - Used To Connect Female And Male Threaded Pipes Or Fittings Of Different Diameters. It Is A Fitting Specially Used In Pipeline Connection Engineering. It Is Suitable For Most Gases, Water, Oil And Corrosive Liquids..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These 304 Stainless Steel Fittings Are Lead-Free..
Working Pressure & Temperature - 2800Psi Maximum Working Pressure, Temperature Range -328°F To +392°F (-200°C To +200°C).
Material - Made Of High Quality 304 Stainless Steel, It Has Excellent Oxidation And Corrosion Resistance, High Compressive Strength, Abrasion Resistance, Durability, Good Low Temperature Toughness, Heat Resistance And Mechanical Properties..
Features
- SIZE - 1/2" NPT Male x 1/4" NPT Female Hex Bushing. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high quality 304 stainless steel, it has excellent oxidation and corrosion resistance, high compressive strength, abrasion resistance, durability, good low temperature toughness, heat resistance and mechanical properties.
- USE - Used to connect female and male threaded pipes or fittings of different diameters. It is a fitting specially used in pipeline connection engineering. It is suitable for most gases, water, oil and corrosive liquids.
- WORKING PRESSURE & TEMPERATURE - 2800PSI maximum working pressure, temperature range -328 F to +392 F (-200 C to +200 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these 304 stainless steel fittings are lead-free.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #5
ChillWaves Brass Mini Ball Valve, Shut Off Switch Ball Valve 1/4" NPT Male x 1/4" NPT Female Thread Pipe Fitting(2-PACK)
Asin: B0BDGSZB7W | Model: CWJX082D | PartNumber: CWJX082D
Use - Brass Ball Valve Is Mainly Used For Cutting, Distributing And Changing The Flow Direction Of Medium, With Good Flow Regulation Function. It Is A Pipe Fitting Specially Used For Pipe Connection Engineering. It Is Suitable For Most Gases, Water, Oils And Corrosive Liquids..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper, Usually Cannot Be Screwed To The End, This Ball Valve Is Not Limited By The Mounting Orientation, The Flow Of The Medium Can Be Any Direction..
Features - For Manual On/Off Control.90-Degree Operable Handle, Opening And Closing Quickly And Lightly.Simple Structure, Relatively Small Size, Easy To Install In A Narrow Working Space, Light Weight And Easy Maintenance..
Material - Chrome Plated Brass, With Strong Wear And Corrosion Resistance, High Compressive Strength, Durability, Low Magnetic Permeability And High Temperature Ductility..
Features
- SIZE - 1/4" NPT Male x 1/4" NPT Ball Valve. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Chrome Plated Brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
- Use - Brass ball valve is mainly used for cutting, distributing and changing the flow direction of medium, with good flow regulation function. It is a pipe fitting specially used for pipe connection engineering. It is suitable for most gases, water, oils and corrosive liquids.
- FEATURES - For manual on/off control.90-degree operable handle, opening and closing quickly and lightly.Simple structure, relatively small size, easy to install in a narrow working space, light weight and easy maintenance.
- NOTICE - NPT is a tapered pipe thread with a 60 taper, usually cannot be screwed to the end, this ball valve is not limited by the mounting orientation, the flow of the medium can be any direction.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #6
ChillWaves Brass Pipe Fitting, Reducer Adapter 1/2" NPT Female x 1/4" NPT Male Thread Adapter(6-PACK)
Asin: B0B754YQGL | Model: CWJX032 | PartNumber: CWJX032
Use - Used To Connect Female And Male Threaded Pipes Or Fittings Of Different Diameters. Change The Pipe Diameter And Thread Type. It Is A Pipe Fitting Specially Used For Pipe Connection Engineering. It Is Suitable For Most Gases, Water, Oils And Corrosive Liquids..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These Brass Fittings Are Low In Lead But Not Suitable For Drinking Water..
Working Pressure & Temperature - 1200Psi Maximum Working Pressure, Temperature Range -65°F To +250°F (-53°C To +121°C).
Material - Made Of High-Quality Brass, With Strong Wear And Corrosion Resistance, High Compressive Strength, Durability, Low Magnetic Permeability And High Temperature Ductility..
Features
- SIZE - 1/2" NPT Female x 1/4" NPT Male Reducer Adapter. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
- Use - Used to connect female and male threaded pipes or fittings of different diameters. Change the pipe diameter and thread type. It is a pipe fitting specially used for pipe connection engineering. It is suitable for most gases, water, oils and corrosive liquids.
- WORKING PRESSURE & TEMPERATURE - 1200PSI maximum working pressure, temperature range -65 F to +250 F (-53 C to +121 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these brass fittings are low in lead but not suitable for drinking water.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #7
ChillWaves Brass In-Line Spring Check Valve DN20 3/4" Male Thread, One-Way Non-return Vertical Check Valve Prevent Water Back-flow(2-PACK)
Asin: B0CX1XPJ5N | Model: CWJX258 | PartNumber: CWJX258
Use - Used To Prevent Backflow Of The Medium In The Pipeline, Through The Medium Itself To Flow And Thus Automatically Open And Close The Valve Flap, Only Allows The Medium To Flow In One Direction, It Is Suitable For Most Gases, Water, Oil..
Product Design - Can Prevent Fluid Backflow, Good Sealing, Easy To Install And Disassemble, Thickened Valve Body, Inner Wall Polishing Treatment, Smooth And Not Easy To Scale, Copper Stem And Copper Core To Prevent Leakage..
Working Pressure & Temperature - 230Psi Maximum Working Pressure, Temperature Range -4°F To +250°F (-20°C To +121°C).
Material - Made Of High-Quality Brass, With Strong Wear And Corrosion Resistance, High Compressive Strength, Durability, Low Magnetic Permeability And High Temperature Ductility，With Stainless Steel Spring, Vertical And Horizontal Installation..
Features
- Size - 3/4" Male Thread Check Valve. Note This thread is not an NPT thread, please refer to the dimensional drawing for specific diameters.
- MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility with stainless steel spring, vertical and horizontal installation.
- Use - Used to prevent backflow of the medium in the pipeline, through the medium itself to flow and thus automatically open and close the valve flap, only allows the medium to flow in one direction, it is suitable for most gases, water, oil.
- WORKING PRESSURE & TEMPERATURE - 230PSI maximum working pressure, temperature range -4 F to +250 F (-20 C to +121 C)
- PRODUCT DESIGN - Can prevent fluid backflow, good sealing, easy to install and disassemble, thickened valve body, inner wall polishing treatment, smooth and not easy to scale, copper stem and copper core to prevent leakage.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #8
ChillWaves Brass Pipe Fitting, 90 Degree Barstock Street Elbow 1/2" NPT Female x 1/2" NPT Male Thread Adapter(2-PACK)
Asin: B0B754X36F | Model: CWJX021D | PartNumber: CWJX021D
Use - Connects Female And Male Threaded Fittings Of The Same Diameter At An Angle Of 90° To Change The Direction Of Flow Between Pipes. It Is A Pipe Fitting Specially Used For Pipe Connection Engineering. It Is Suitable For Most Gases, Water, Oil And Corrosive Liquids..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These Brass Fittings Are Low In Lead But Not Suitable For Drinking Water..
Working Pressure & Temperature - 1200Psi Maximum Working Pressure, Temperature Range -65°F To +250°F (-53°C To +121°C).
Material - Made Of High-Quality Brass, With Strong Wear And Corrosion Resistance, High Compressive Strength, Durability, Low Magnetic Permeability And High Temperature Ductility..
Features
- SIZE - 1/2" NPT Male x 1/2" NPT Male 90 Degree Elbow. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
- Use - Connects female and male threaded fittings of the same diameter at an angle of 90 to change the direction of flow between pipes. It is a pipe fitting specially used for pipe connection engineering. It is suitable for most gases, water, oil and corrosive liquids.
- WORKING PRESSURE & TEMPERATURE - 1200PSI maximum working pressure, temperature range -65 F to +250 F (-53 C to +121 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these brass fittings are low in lead but not suitable for drinking water.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #9
ChillWaves 1/4" NPT Brass Pipe Fitting Kit, 2 Ball Valve 2 Hex Bushing 2 Hex Nipple 2 Tee Air Hose Fiting Kit Thread Adapter(8-PACK)
Asin: B0BW9KHXW3 | Model: CWJX101 | PartNumber: CWJX101
Use - The Kit Is Mainly Used For Cutting, Distributing And Changing The Flow Direction Of The Medium, For Connecting A Pressure Gauge, For Measuring The Pressure Of The Fluid Passing Through The Two Main Pipes, And Has A Good Flow Regulation Function. It Is A Pipe Coupling Specially Designed For Pipe Connection Works. It Is Suitable For Most Gases, Water, Oil And Corrosive Liquids..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These Brass Fittings Are Low In Lead But Not Suitable For Drinking Water..
Features - The Lever Handle Is Covered With Red Plastic For Manual On/Off Control.180-Degree Operable Handle, Opening And Closing Quickly And Lightly.Simple Structure, Relatively Small Size, Easy To Install In A Narrow Working Space, Light Weight And Easy Maintenance..
Material - Made Of High-Quality Brass, With Strong Wear And Corrosion Resistance, High Compressive Strength, Durability, Low Magnetic Permeability And High Temperature Ductility..
Features
- SIZE - 1/4" NPT Ball Valve&Tee&Nipple,1/4" NPT x 1/8" NPT Hex Bushing. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
- Use - The kit is mainly used for cutting, distributing and changing the flow direction of the medium, for connecting a pressure gauge, for measuring the pressure of the fluid passing through the two main pipes, and has a good flow regulation function. It is a pipe coupling specially designed for pipe connection works. It is suitable for most gases, water, oil and corrosive liquids.
- FEATURES - The lever handle is covered with red plastic for manual on/off control.180-degree operable handle, opening and closing quickly and lightly.Simple structure, relatively small size, easy to install in a narrow working space, light weight and easy maintenance.
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these brass fittings are low in lead but not suitable for drinking water.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #10
ChillWaves Brass Pipe Fitting, Outer Hex Head Socket Pipe Plug Fitting 1/2" NPT Male Thread Adapter(12-PACK)
Asin: B0C4LLF36J | Model: CWJX105 | PartNumber: CWJX105
Use - Used To Close And Terminate The End Of A Pipe To Prevent Leakage Of Fluid Or Gas. Mainly Suitable For Sealing Water Pump Ports, Intake Manifold Ports, Engine Block Holes, Water Temperature Or Oil Sensor Holes, Etc..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These Brass Fittings Are Low In Lead But Not Suitable For Drinking Water..
Working Pressure & Temperature - 1200Psi Maximum Working Pressure, Temperature Range -65°F To +250°F (-53°C To +121°C).
Material - Made Of High-Quality Brass, With Strong Wear And Corrosion Resistance, High Compressive Strength, Durability, Low Magnetic Permeability And High Temperature Ductility..
Features
- SIZE - 1/2" NPT Male Outer Hex Head Socket Pipe Plug. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
- Use - Used to close and terminate the end of a pipe to prevent leakage of fluid or gas. Mainly suitable for sealing water pump ports, intake manifold ports, engine block holes, water temperature or oil sensor holes, etc.
- WORKING PRESSURE & TEMPERATURE - 1200PSI maximum working pressure, temperature range -65 F to +250 F (-53 C to +121 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these brass fittings are low in lead but not suitable for drinking water.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #11
ChillWaves Brass Pipe Fitting, Reducer Hex Nipple 3/4" NPT Male x 1/2" NPT Male Thread Adapter(3-PACK)
Asin: B0C4LL5KJY | Model: CWJX117D | PartNumber: CWJX117D
Use - It Is Used To Connect Female Threaded Pipe Fittings Of The Different Diameter Or To Extend The Length Of Pipes. It Is A Pipe Fitting Specially Used For Pipe Connection Engineering. It Is Suitable For Most Gases, Water, Oils And Corrosive Liquids..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These Brass Fittings Are Low In Lead But Not Suitable For Drinking Water..
Working Pressure & Temperature - 1200Psi Maximum Working Pressure, Temperature Range -65°F To +250°F (-53°C To +121°C).
Material - Made Of High-Quality Brass, With Strong Wear And Corrosion Resistance, High Compressive Strength, Durability, Low Magnetic Permeability And High Temperature Ductility..
Features
- SIZE - 3/4" NPT Male x 1/2" NPT Male Reducer Hex Nipple. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
- Use - It is used to connect female threaded pipe fittings of the different diameter or to extend the length of pipes. It is a pipe fitting specially used for pipe connection engineering. It is suitable for most gases, water, oils and corrosive liquids.
- WORKING PRESSURE & TEMPERATURE - 1200PSI maximum working pressure, temperature range -65 F to +250 F (-53 C to +121 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these brass fittings are low in lead but not suitable for drinking water.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #12
ChillWaves 304 Stainless Steel Pipe Fitting, Reducer Adapter 1/2" NPT Female x 3/8" NPT Male Thread Adapter(6-PACK)
Asin: B0CQ2QMRV6 | Model: CWJX207 | PartNumber: CWJX207
Use - Used To Connect Female And Male Threaded Pipes Or Fittings Of Different Diameters. It Is A Fitting Specially Used In Pipeline Connection Engineering. It Is Suitable For Most Gases, Water, Oil And Corrosive Liquids..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These 304 Stainless Steel Fittings Are Lead-Free..
Working Pressure & Temperature - 2800Psi Maximum Working Pressure, Temperature Range -328°F To +392°F (-200°C To +200°C).
Material - Made Of High Quality 304 Stainless Steel, It Has Excellent Oxidation And Corrosion Resistance, High Compressive Strength, Abrasion Resistance, Durability, Good Low Temperature Toughness, Heat Resistance And Mechanical Properties..
Features
- SIZE - 1/2" NPT Female x 3/8" NPT Male Reducer Adapter. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high quality 304 stainless steel, it has excellent oxidation and corrosion resistance, high compressive strength, abrasion resistance, durability, good low temperature toughness, heat resistance and mechanical properties.
- USE - Used to connect female and male threaded pipes or fittings of different diameters. It is a fitting specially used in pipeline connection engineering. It is suitable for most gases, water, oil and corrosive liquids.
- WORKING PRESSURE & TEMPERATURE - 2800PSI maximum working pressure, temperature range -328 F to +392 F (-200 C to +200 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these 304 stainless steel fittings are lead-free.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #13
ChillWaves Brass Pipe Fitting, Reducer Hex Coupling 1/2" NPT Female x 3/8" NPT Female Thread Adapter(3-PACK)
Asin: B0C4LLN62F | Model: CWJX123D | PartNumber: CWJX123D
Use - It Is Used To Connect Male Threaded Pipe Fittings Of The Different Diameter Or To Extend The Length Of Pipes. It Is A Pipe Fitting Specially Used For Pipe Connection Engineering. It Is Suitable For Most Gases, Water, Oils And Corrosive Liquids..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These Brass Fittings Are Low In Lead But Not Suitable For Drinking Water..
Working Pressure & Temperature - 1200Psi Maximum Working Pressure, Temperature Range -65°F To +250°F (-53°C To +121°C).
Material - Made Of High-Quality Brass, With Strong Wear And Corrosion Resistance, High Compressive Strength, Durability, Low Magnetic Permeability And High Temperature Ductility..
Features
- SIZE - 1/2" NPT Female x 3/8" NPT Female Reducer Hex Coupling. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
- Use - It is used to connect male threaded pipe fittings of the different diameter or to extend the length of pipes. It is a pipe fitting specially used for pipe connection engineering. It is suitable for most gases, water, oils and corrosive liquids.
- WORKING PRESSURE & TEMPERATURE - 1200PSI maximum working pressure, temperature range -65 F to +250 F (-53 C to +121 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these brass fittings are low in lead but not suitable for drinking water.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #14
ChillWaves Brass Pipe Fitting Kit, Hex Bushing 1/4" 1/8", 3/8" 1/8", 3/8" 1/4", 1/2" 1/4", 1/2" 3/8", 3/4" 1/2" NPT Thread Adapter(12-PACK)
Asin: B0BW9KJXTT | Model: CWJX092 | PartNumber: CWJX092
Use - Used To Connect Female And Male Threaded Pipes Or Fittings Of Different Diameters. It Is A Fitting Specially Used In Pipeline Connection Engineering. It Is Suitable For Most Gases, Water, Oil And Corrosive Liquids..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These Brass Fittings Are Low In Lead But Not Suitable For Drinking Water..
Working Pressure & Temperature - 1200Psi Maximum Working Pressure, Temperature Range -65°F To +250°F (-53°C To +121°C).
Material - Made Of High-Quality Brass, With Strong Wear And Corrosion Resistance, High Compressive Strength, Durability, Low Magnetic Permeability And High Temperature Ductility..
Features
- SIZE - 1/4" 1/8", 3/8" 1/8", 3/8" 1/4", 1/2" 1/4", 1/2" 3/8", 3/4" 1/2" NPT Thread Adapter Hex Bushing Kit. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
- Use - Used to connect female and male threaded pipes or fittings of different diameters. It is a fitting specially used in pipeline connection engineering. It is suitable for most gases, water, oil and corrosive liquids.
- WORKING PRESSURE & TEMPERATURE - 1200PSI maximum working pressure, temperature range -65 F to +250 F (-53 C to +121 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these brass fittings are low in lead but not suitable for drinking water.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #15
ChillWaves 304 Stainless Steel Cast Pipe Fitting, Coupling 1/2" NPT Female x 1/2" NPT Female Thread Adapter(6-PACK)
Asin: B0CG6BCHPP | Model: CWJX176D | PartNumber: CWJX176D
Use - It Is Used To Connect Male Threaded Pipe Fittings Of The Same Diameter Or To Extend The Length Of Pipes. It Is A Pipe Fitting Specially Used For Pipe Connection Engineering. It Is Suitable For Most Gases, Water, Oils And Corrosive Liquids..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These 304 Stainless Steel Fittings Are Lead-Free..
Working Pressure & Temperature - 225Psi Maximum Working Pressure, Temperature Range -65°F To +250°F (-53°C To +121°C).
Material - Made Of High Quality 304 Stainless Steel, It Has Excellent Oxidation And Corrosion Resistance, High Compressive Strength, Abrasion Resistance, Durability, Good Low Temperature Toughness, Heat Resistance And Mechanical Properties..
Features
- SIZE - 1/2" NPT Female x 1/2" NPT Female Coupling. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high quality 304 stainless steel, it has excellent oxidation and corrosion resistance, high compressive strength, abrasion resistance, durability, good low temperature toughness, heat resistance and mechanical properties.
- Use - It is used to connect male threaded pipe fittings of the same diameter or to extend the length of pipes. It is a pipe fitting specially used for pipe connection engineering. It is suitable for most gases, water, oils and corrosive liquids.
- WORKING PRESSURE & TEMPERATURE - 225PSI maximum working pressure, temperature range -65 F to +250 F (-53 C to +121 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these 304 stainless steel fittings are lead-free.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #16
ChillWaves 1/4" Portable Air Chuck Brass Closed Ball Inflator with 1/4" NPT Industrial Air Plug for Inflator Gauge Nozzle Compressor Accessories Air Compressor Tire Attachment(2-PACK)
Asin: B0CLM23Y4B
Use - When You Want To Work With A Closed Ball Air Chuck, Simply Turn The Screw Connection，Apply To Air Pumps And Compressor Accessories, Also Can Be Used For Trucks, Buses, Cars, Bicycles, Motorcycles And More..
Product Design - Pre-Coated Sealant Lines Reduce Thread Clearance And Prevent Air Leakage..
Working Pressure - 300Psi Maximum Working Pressure..
Material - Brass & Hardened Steel Structure For Longer Service Life, Strong Wear And Corrosion Resistance, High Compressive Strength And Durability..
Features
- SIZE - 1/4" NPT Closed Ball Air Chuck With 1/4'' NPT Air Plug. Compatible with industrial/M/D type Quick Connect Air Couplers, and it is interchangeable with most manufacturers, Suitable for commercial and industrial air filling applications.
- Material - Brass & hardened steel structure for longer service life, strong wear and corrosion resistance, high compressive strength and durability.
- Use - When you want to work with a closed ball air chuck, simply turn the screw connection Apply to air pumps and compressor accessories, also can be used for trucks, buses, cars, bicycles, motorcycles and more.
- WORKING PRESSURE - 300PSI maximum working pressure.
- PRODUCT DESIGN - Pre-coated sealant lines reduce thread clearance and prevent air leakage.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #17
ChillWaves Brass Air Hose Fittings, 90 Degree Elbow Hose Barb Fittings 5/8" Barb x 1/2" NPT Male Thread Adapter with Hose Clamps(3-PACK)
Asin: B0CQ2Q7GLC | Model: CWJX235D | PartNumber: CWJX235D
Use - The Barbed End Is Used To Connect Flexible Hose Or Tubing, The Npt End Is Used To Connect To Threaded Pipe Fittings, 90° Angle To Change Direction Of Flow Between Pipes, And Can Be Used With Pvc, Pu, Rubber Hose Or Tubing. It Is A Pipe Fitting Specially Used For Pipe Connection Engineering. It Is Suitable For Most Gases, Water, Oils And Corrosive Liquids..
Notice - Npt Is A Tapered Pipe Thread With A 60° Taper And Generally Cannot Be Screwed To The End, These Brass Fittings Are Low In Lead But Not Suitable For Drinking Water..
Working Pressure & Temperature - 1200Psi Maximum Working Pressure, Temperature Range -65°F To +250°F (-53°C To +121°C).
Material - Made Of High-Quality Brass, With Strong Wear And Corrosion Resistance, High Compressive Strength, Durability, Low Magnetic Permeability And High Temperature Ductility..
Features
- SIZE - 5/8" Barb x 1/2" NPT Male 90 Degree Elbow Hose Barb Fitting. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
- Use - The barbed end is used to connect flexible hose or tubing, the NPT end is used to connect to threaded pipe fittings, 90 angle to change direction of flow between pipes, and can be used with PVC, PU, rubber hose or tubing. It is a pipe fitting specially used for pipe connection engineering. It is suitable for most gases, water, oils and corrosive liquids.
- WORKING PRESSURE & TEMPERATURE - 1200PSI maximum working pressure, temperature range -65 F to +250 F (-53 C to +121 C)
- NOTICE - NPT is a tapered pipe thread with a 60 taper and generally cannot be screwed to the end, these brass fittings are low in lead but not suitable for drinking water.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #18
ChillWaves Brass Pneumatics Reusable Replacement Fitting Reusable Hose Splicer 1/4" ID Hose x 1/4" ID Hose 1/4" Barb Repair Fitting(10-PACK)
Asin: B0BFN5QDHS
Use - For Hose Extension And Repair, Temperature And Pressure Resistance, Good Sealing And Repeatability, No Need For Welding And Flaring Tools, Easy Disassembly, Installation And Maintenance, Etc.It Is Suitable For Most Gases, Water, Oils And Corrosive Liquids..
Notice - For Pvc, Pe And Other Plastic Hoses, These Brass Fittings Are Low In Lead But Not Suitable For Drinking Water..
Working Pressure & Temperature - 1200Psi Maximum Working Pressure, Temperature Range -65°F To +250°F (-53°C To +121°C).
Material - Made Of High-Quality Brass, With Strong Wear And Corrosion Resistance, High Compressive Strength, Durability, Low Magnetic Permeability And High Temperature Ductility..
Features
- SIZE - 1/4" ID x 1/4" ID Reusable Hose Splicer Repair Fitting. Note, if you want it to work on rubber and polyurethane hoses, please check the size before buying and you may need to thin the outer layer of the hose.
- MATERIAL - Made of high-quality brass, with strong wear and corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
- Use - for hose extension and repair, temperature and pressure resistance, good sealing and repeatability, no need for welding and flaring tools, easy disassembly, installation and maintenance, etc.It is suitable for most gases, water, oils and corrosive liquids.
- WORKING PRESSURE & TEMPERATURE - 1200PSI maximum working pressure, temperature range -65 F to +250 F (-53 C to +121 C)
- NOTICE - For PVC, PE and other plastic hoses, these brass fittings are low in lead but not suitable for drinking water.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon #19
ChillWaves Iron Air Hose Fitting, 1" NPT Male 2 Lug Universal Coupling, Chicago Fitting(2-PACK)
Asin: B0CLLYYWQQ | Model: CWJX199D | PartNumber: CWJX199D
Use - For Professional Workplaces, Auto Repair Shops Or Garages At Home, Air Hoses, Air Compressors, Air Tools, Quick Switching Between Many Different Pneumatic Tools And Accessories..
Product Design - Each Coupling Is Equipped With A Safety Lock And Spare Rubber Gasket, Which Is Inserted Into The Coupling's Locking Hole To Prevent The Coupling From Falling Off During A Certain Period Of Time At A Certain Pressure, Leading To Leaks And Other Problems..
Easy Installation - 2 Lug Chicago Series Of Products Using A Unified 42Mm Pitch Connection Without Other Couplings, The Whole Series Of Random Connection To Use, Reduce Construction Costs..
Material - Carbon Steel Structure, High Compressive Strength, Durable, Galvanized Surface, Longer Service Life, Corrosion Resistance, 150Psi Maximum Working Pressure..
Features
- SIZE - 1" NPT Male Universal Coupling. Note, NPT thread is the nominal pipe size and does not represent the actual diameter, please refer to the dimension drawing for specific diameter.
- Material - Carbon steel structure, high compressive strength, durable, galvanized surface, longer service life, corrosion resistance, 150PSI maximum working pressure.
- Use - For professional workplaces, auto repair shops or garages at home, air hoses, air compressors, air tools, quick switching between many different pneumatic tools and accessories.
- EASY INSTALLATION - 2 Lug Chicago series of products using a unified 42MM pitch connection without other couplings, the whole series of random connection to use, reduce construction costs.
- PRODUCT DESIGN - Each coupling is equipped with a safety lock and spare rubber gasket, which is inserted into the coupling's locking hole to prevent the coupling from falling off during a certain period of time at a certain pressure, leading to leaks and other problems.
- See more on Amazon...
Brand: ChillWaves | Manufacturer: ChillWaves
See On Amazon
Looking For Something Else?
Search