1833C LCR Meter Hantek Handheld LCR Meter, 0.30% Accuracy,0.3/0.6 Vrms with 10 Typical Test Frequency
Asin: B0BWRWMF4Y
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Application: Measuring The Parameters Of The Component Such As Inductance, Capacitance, Resistance And So On..
Features
- 10 typical test frequency: 100Hz, 120Hz, 400Hz, 1kHz, 4kHz, 10kHz, 40kHz, 50kHz, 75kHz, 100kHz
- Application: Measuring the parameters of the component such as inductance, capacitance, resistance and so on.
- See more on Amazon...
Brand: Hantek | Manufacturer: Hantek
See On Amazon Similar To 1833C LCR Meter Hantek Handheld
#1
FNIRSI 2C23T 3 in 1 Handheld Oscilloscope Multimeter DDS Generator, 2 Channels, 10MHz Bandwidth, 50MSa/s Sampling Rate, 10000 Counts, Voltage, Current, Capacitor, Resistor, Diode Test
Asin: B0CMT5WMFY | Model: 2C23T | PartNumber: 2C23T
【Signal Generator】The Maximum Waveform Output Frequency Can Reach 2Mhz And A Step Of 1Hz, And Can Output Seven Waveforms Including Sine, Square, Triangle, Full, Half, Noise, And Dc..
【Save Function】One-Click Save, Screening Function. You Can Upload The Saved Image By Connecting To Pc Via Type-C. You Can Easily Compare The Waveforms By Displaying The Reference Waveform And The Measured Waveform On The Same Screen..
【Excellent Design】The Oscilloscope Adopts Fpga+Mcu+Adc Hardware Architecture, Built-In High-Voltage Protection Module, Adopts 2.8-Inch 320*240 Resolution Hd Lcd Display, Built-In 3000Mah Rechargeable Li-Ion Battery, Standby Time Up To 6H, Type-C Interface Supports 5V/1A Power Adapter Charging..
【Multimeter Mode】4-Digit 10000 Counts. Ac Voltage: 0-750V, Dc Voltage: 0-999.9V, Dc/Ac Current: 0-9.999A, Resistance: 0-99.99Mω, Capacitance: 0-99.99Mf, Temperature: -55°C-1300°C/-67~2372℉, Diode, Continuity Measurement. An Ideal Multi-Function Meter For Professionals, Factories, Schools, Hobbyists Or Home Use..
Features
- Oscilloscope Mode 2 channel handheld oscilloscope, 10MHz bandwidth, real-time sampling rate 50MSa/s, record depth 32kb, maximum measurement voltage 400V, automatic measurement function, trigger function auto/normal/single, 200mv/div-10v/div vertical sensitivity, support waveform image storage and export.
- Multimeter Mode 4-digit 10000 Counts. AC Voltage: 0-750V, DC Voltage: 0-999.9V, DC/AC Current: 0-9.999A, Resistance: 0-99.99M , Capacitance: 0-99.99mF, Temperature: -55 C-1300 C/-67~2372 , Diode, Continuity Measurement. An ideal multi-function meter for professionals, factories, schools, hobbyists or home use.
- Signal Generator The maximum waveform output frequency can reach 2MHz and a step of 1Hz, and can output seven waveforms including sine, square, triangle, full, half, noise, and DC.
- Excellent Design The Oscilloscope adopts FPGA+MCU+ADC hardware architecture, built-in high-voltage protection module, adopts 2.8-inch 320*240 resolution HD LCD display, built-in 3000mAh rechargeable Li-ion battery, standby time up to 6H, Type-C interface supports 5V/1A power adapter charging.
- Save function one-click save, screening function. You can upload the saved image by connecting to PC via Type-C. You can easily compare the waveforms by displaying the reference waveform and the measured waveform on the same screen.
- See more on Amazon...
Brand: FNIRSI | Manufacturer: FNIRSI
Dimensions: 1.40 x 6.60 x 3.40 inches | Weight: 0.65 Pounds
See On Amazon #2
Handheld Digital Oscilloscope Kit - AUKUYEE 2.4"TFT Mini Portable Oscilloscope, with Power Supply and BNC-Clip Cable Probe Q15001
Asin: B07QML4LJL | Model: no | PartNumber: no | Ean: 8414743678495
Rotary Encoder - It Has Been Added The Rotary Encoder, Makes Parameter Adjustment Quicker And Easier..
What You Get - You Will Get An Assembled Oscilloscope, Bnc-Clip Cable And A Power Pupply. Detailed Operation Instructions Troubleshooting Guide And Schematic Are Also Provided..
Assembled Finished - Q15001 Oscilloscope Is An Assembled Finished Machine. Not Diy Part, It Can Be Used Directly To Avoid Assembling Welding Process Problems And Greatly Saves The Assembly Time..
Designing To Your Needs - Display And Mcu Are Mounted On The Same Board (Mainboard) To Avoid Using Inter-Board Pin-Headers. Analog Channel Is Placed On A Separate Board That Contains Most User Install Parts, So The Analog And Digital Circuits Can Be Better Separated..
Features
- UPGRADED VERSION - Please Calibrate the Oscilloscope Before Use! The sensitivity of Q15001 has been extended in both directions and is higher and wider. It reaches 5mV/div - 20V/div. Also, this updated version can be handheld.
- DESIGNING TO YOUR NEEDS - Display and MCU are mounted on the same board (mainboard) to avoid using inter-board pin-headers. Analog channel is placed on a separate board that contains most user install parts, so the analog and digital circuits can be better separated.
- ROTARY ENCODER - It has been added the rotary encoder, makes parameter adjustment quicker and easier.
- ASSEMBLED FINISHED - Q15001 oscilloscope is an Assembled finished Machine. NOT DIY PART, it can be used directly to avoid assembling welding process problems and greatly saves the assembly time.
- WHAT YOU GET - You will get an assembled oscilloscope, BNC-clip cable and a power pupply. Detailed Operation instructions troubleshooting guide and schematic are also provided.
- See more on Amazon...
Brand: AUKUYEE | Manufacturer: AUKUYEE
See On Amazon #3
DE-5000 Handheld LCR Meter
Asin: B00S298KJO | Model: CECOMINOD066433 | PartNumber: CECOMINOD066433 | Ean: 0711463930413, 0633643394337 | UPC: 711463930413, 633643394337
Components Could Be Measured In Serial Or Parallel Mode According To The Dut (Device Under Test) Impedance Automatically.User Could Select The Desired Test Frequencies Of 100Hz/120Hz/1Khz/10Khz /100Khz..
Standard Accessories: English Pdf Manual, Dc9v Battery, Alligator Test Lead Case(Tl-21), Smd Tweezers Case(Tl-22), Guard Line(Tl-23),,,,, Option: Ir To Usb Cace *It Isn't Included..
The "Sorting"Mode Could Help The User To Make A Quick Sort For A Bunch Of Components..
This Lcr Meter Is Fully Auto Ranging Operation For Ac Impedance & Dc Resistance Measurement. The User Could Measure The L/C/R Components Directly In “Auto-Lcr “ Smart Mode Without Selecting The Function Key..
Features
- This LCR Meter is a 19999/ 9999 counts dual display, high accuracy LCR meter, which could measure Inductance/ Capacitance/ Resistance with secondary parameters including dissipation factor (D), quality factor (Q), phase angle , equivalent series/ parallel resistance (ESR or Rp).
- This LCR Meter is fully auto ranging operation for AC impedance & DC resistance measurement. The user could measure the L/C/R components directly in AUTO-LCR smart mode without selecting the function key.
- Components could be measured in serial or parallel mode according to the DUT (device under test) impedance automatically.User could select the desired test frequencies of 100Hz/120Hz/1kHz/10kHz /100kHz.
- The Sortingmode could help the user to make a quick sort for a bunch of components.
- Standard Accessories: English PDF manual, DC9V Battery, Alligator test lead case(TL-21), SMD Tweezers case(TL-22), Guard Line(TL-23),,,,, Option: IR to USB cace *It isn't included.
- See more on Amazon...
Brand: DER EE ELECTRICAL INSTRUMENT | Manufacturer: DER EE ELECTRICAL INSTRUMENT
Dimensions: 2.07 x 3.74 x 7.40 inches | Weight: 0.99 pounds
See On Amazon #4
Hantek CC-65 AC/DC Multimeter Current Clamp Meter with BNC Connector Up to 20 kHz 20mA to 65A DC
Asin: B06W2KFZLW | Model: CC-65 | PartNumber: CC-65
Ean: 0887662208278, 8011485072880, 0712383648341, 0600209500198, 0611550889856, 7707541466809, 0520583405455, 0519240055706, 7592223087485, 0519240055713, 7753661994913, 7688407674968, 4897014180110, 0603281794936, 0712383649287
UPC: 712383649287, 603281794936, 519240055713, 520583405455, 600209500198, 611550889856, 887662208278, 712383648341, 519240055706
Power Electronics Equipment Measurement.
Its Current Transducer Is Composed By Permalloy And Hall Element, Which Linearly Transform The Ac Or Dc Current To Ac Or Dc Current Voltage.
Allows Your Multimeter To Measure Current Data And Enable Your Oscilloscope To Measure The Current Waveforms.
Motor Drive Of Frequency Converter (Or Other Electronics) Measurement.
Features
- Power circuit measurement and malfunction analysis
- Motor drive of frequency converter (or other electronics) measurement
- Power electronics equipment measurement
- Allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms
- Its current transducer is composed by permalloy and hall element, which linearly transform the AC or DC current to AC or DC current voltage
- See more on Amazon...
Brand: Hantek | Manufacturer: HATTRICK
Dimensions: 2.76 x 7.68 x 1.30 inches | Weight: 0.41 Pounds
See On Amazon #5
Hantek 1008C PC USB 8CH Automotive Diagnostic Digital Oscilloscope/DAQ/Programmable Generator
Asin: B01EZX2NXO | Model: 1008C | PartNumber: 1008C | Ean: 0889743087741 | UPC: 889743087741
Cost-Effective 8 Channels Oscilloscope For Vehicle Testing;.
8 Channels Programmable Generator Which Can Analog Signals Of Crankshaft, Camshaft Etc..
Daq Card Function;.
Features
- 2.4MSa/s, 12bits;
- DAQ card function;
- Cost-effective 8 channels oscilloscope for vehicle testing;
- 8 channels programmable generator which can analog signals of crankshaft, camshaft etc.
- See more on Amazon...
Brand: Hantek | Manufacturer: Hantek
Dimensions: 7.50 x 8.80 x 1.70 inches
See On Amazon #6
2 in 1 Handheld Oscilloscope Multimeter Professional Oscilloscope Multimeter with 2.5 Msps High Sampling Automatic Waveform Capture Function DC AC Voltagem Current Test
Asin: B08832JX4H | Model: LM2020 | PartNumber: LM2020 | Ean: 0768477385357 | UPC: 768477385357
More Accuracy -Dedicated Chip, The Automatic Waveform Capture Function, Easy Operation. The Software Calibration Technology, Memory Calibration Coefficients. Measure More Accurately. To Enable Quiet Mode (Disable Keypress Beeps), Press And Hold The "F4" Button And Then Rotate The Rotary Knob To Turn On The Instrument..
Overload Protection & Multi-Purpose - Built-In 500Ma/10A Double Protective Tube, Dual Protection Of The Instrument. Can Choose To Automatically Shutdown Or Continuous Operation, Applicable To The Workplace Such As Family, School, And Factory. Distortion Detection Also Protect Safety..
Led Backlight & Storage / Readout - Analog Broadband Range Up To: D Ac ~ 1Mhz, Display Hold, Storage / Readout Up To 10 Waveforms And 100 Sets Of Measurement Values. 240X320 Color Screen With Led Backlighting. More Clear And Suitable For Working At Night..
More Powerful Detection Range -Dc Voltage 0 ~ 1000V, Ac Voltage 0 ~ 750V, Dc/Ac Current 0 ~ 10A, Resistance 0 ~ 40Mω, Capacitance 0 ~ 100Μf, Frequency 0 ~ 5Mhz, Diode / Continuity Open Circuit Voltage 1.5V, Judgement Resistance 50Ω. Transistor Amplification Test To Meet All Test Requirements..
Features
- FASTER SAMPLING SPEED - 2.5Msps high-speed A/D data collecting, high sampling rate and high bandwidth, one-key transform to waveform function furing measuring.3 waveform scanning modes: automatic/conventional/single. Improve work efficiency. You will receive ET828 or LM2020, they are same product, have same function, LM2020 is our updated name.
- MORE POWERFUL DETECTION RANGE -DC voltage 0 ~ 1000V, AC voltage 0 ~ 750V, DC/AC Current 0 ~ 10A, Resistance 0 ~ 40M , Capacitance 0 ~ 100 f, Frequency 0 ~ 5MHZ, Diode / Continuity open circuit voltage 1.5V, judgement resistance 50 . Transistor amplification test to meet all test requirements.
- MORE ACCURACY -Dedicated Chip, the automatic waveform capture function, easy operation. The software calibration technology, memory calibration coefficients. Measure more accurately. To enable Quiet Mode (disable keypress beeps), press and hold the F4 button and then rotate the rotary knob to turn on the instrument.
- LED BACKLIGHT & STORAGE / READOUT - Analog broadband range up to: D AC ~ 1MHz, Display hold, storage / readout up to 10 waveforms and 100 sets of measurement values. 240X320 color screen with LED backlighting. More clear and suitable for working at night.
- OVERLOAD PROTECTION & MULTI-PURPOSE - Built-in 500mA/10A double protective tube, dual protection of the instrument. Can choose to automatically shutdown or continuous operation, applicable to the workplace such as family, school, and factory. DISTORTION DETECTION ALSO Protect safety.
- See more on Amazon...
Brand: LIUMY | Manufacturer: LIUMYARTISTOREGO
Weight: 0.40 pounds
See On Amazon #7
Hantek CC-65 AC/DC Current Clamp Meter Transducer for Digital Multimeter Oscilloscope with BNC Type Connector
Asin: B08KZMS4Z2 | Ean: 0611550889924 | UPC: 611550889924
The Oscilloscope Current Probe Is With Accurate Circuit Measurement And Suitable For Dso;.
The Current Probe Is With Output: Bnc Connector;.
Hantek Cc-65 Amp Clamp Is Friendly In Use: Turn On, Clamp It Over A Conductor, And Get A Reading;.
Hantek Cc65 Effective Measurement Range: 20Ma To 65A Dc;.
Features
- Hantek amp clamp AC/DC frequency range: Up to 20 kHz;
- hantek cc65 Effective Measurement Range: 20mA to 65A DC;
- The oscilloscope current probe is with Accurate circuit measurement and suitable for DSO;
- Hantek CC-65 amp clamp is Friendly in use: turn on, clamp it over a conductor, and get a reading;
- The current probe is with Output: BNC connector;
- See more on Amazon...
Brand: Hantek | Manufacturer: Hantek
Dimensions: 1.97 x 3.94 x 8.27 Inches | Weight: 0.55 Pounds
See On Amazon #8
HT30A+ HT201 Hantek Oscilloscope Accessories Set BNC Connecter Auto Test Leads, Auto Ignition Probe and 10MHz 20:1 Attenuator for Assisting Automobile Measurement
Asin: B0BRV7DKR8 | Model: HT30A+HT201 | PartNumber: HT30A+HT201
Ht30a: A Special Line For Assisting Automobile Measurement Instruments To Test Various Types Of Signals. Which Also Can Cooperate With A 20:1 Attenuator..
This Oscilloscope Accessories Set Suitable For Auto Measurement, It Work Better When Used Together, It Meet Your Various Demand Of Your Oscilloscope Test..
Ht201: Ht201 Attenuator Designed For Assisting Automobile Measurement. Passive Attenuator With 20:1 Attenuation, If Input A 20V Signal, It Can Output A 1V Signal. Bandwidth: 10Mhz..
Ht30a: It Consists Of Wide Range Probes, Clips, Gators Can Be Plugged Into The 4 Mm Connectors At The End Of The Cable.Full Shield Can Effectively Reduce The Noise Interference..
Features
- HT30A: 3M BNC to banana adapter cable, heavy duty auto test lead. Allowing the oscilloscope away form the car being tested or repaired and placed on the bench
- HT30A: It consists of wide range probes, clips, gators can be plugged into the 4 mm connectors at the end of the cable.Full shield can effectively reduce the noise interference.
- HT30A: A special line for assisting automobile measurement instruments to test various types of signals. which also can cooperate with a 20:1 attenuator.
- HT201: HT201 Attenuator designed for assisting automobile measurement. Passive attenuator with 20:1 attenuation, if input a 20V signal, it can output a 1V signal. Bandwidth: 10MHz.
- This oscilloscope accessories set suitable for auto measurement, it work better when used together, it meet your various demand of your oscilloscope test.
- See more on Amazon...
Brand: Hantek | Manufacturer: Hantek
See On Amazon #9
EspoTek Labrador: Easy-to-Use, Open-Source, All-in-One USB Oscilloscope, Signal Generator, Power Supply, Logic Analyzer, Multimeter for Windows, Mac, Linux, Android, Raspberry Pi
Asin: B07CVB7ZJG | Model: ETL-001 | PartNumber: ETL-001
Power Supply (4.5 To 15V, 0.75W Max Output, With Closed-Loop Feedback).
Multimeter (V/I/R/C).
Logic Analyzer (2 Channel, 3Msps Per Channel, With Serial Decoding).
Arbitrary Waveform Generator (2 Channel, 1Msps Per Channel).
Features
- Oscilloscope (2 channel, 750ksps)
- Arbitrary Waveform Generator (2 channel, 1MSPS per channel)
- Power Supply (4.5 to 15V, 0.75W max output, with closed-loop feedback)
- Logic Analyzer (2 channel, 3MSPS per channel, with serial decoding)
- Multimeter (V/I/R/C)
- See more on Amazon...
Brand: EspoTek | Manufacturer: EspoTek
Weight: 0.04 pounds
See On Amazon #10
Hantek HT25 Auto Ignition Probe Oscilloscope Automotive Acdessory Inductive Capacitance Sensor 2.5 Meters Length 10,000:1 Decay Work with Oscilloscope
Asin: B0CJ8P1NWQ | Model: HT25 | PartNumber: HT25
The Loot Line Has Three Ends, A Joint Meet Oscilloscope For Bnc Use, A Clip For Use, A Clip Grounding To Pick High-Voltage Gleaned Clip With. Loot Clincher Over Is A Attenuator, Used For Loot High-Pressure Attenuation For Low Pressure, Thus Protecting Oscilloscope Not Electrify Impact..
Attention: Test Clips Shall Not Directly Clip In Spark Plug, Should Be Caught In The Connection Of The Spark Plugs Of Insulation Wire, In Order To Prevent The Breakdown And Causing A Shock..
Attention: To Distance Other High-Voltage At Least 2 Inches Apart, Lest Produce Interference..
Use To Test A Spark Ignition Secondary Overlapping Wave, Overlapping Wave Parameters, Thus Achieved The Detection, The Diagnosis Engine Ignition Position, Make Each Cylinder Ignition Voltage Changing With Time Directly From The Oscilloscope Display..
Ht25 Leading Line Length 2.5 Meters, The Decay Of Up To 10,000:1..
Features
- A inductive capacitance sensor (HT25 auto ignition probe) and working well with automotive oscilloscope.
- HT25 leading line length 2.5 meters, the decay of up to 10,000:1.
- The loot line has three ends, a joint meet oscilloscope for BNC use, a clip for use, a clip grounding to pick high-voltage gleaned clip with. Loot clincher over is a attenuator, used for loot high-pressure attenuation for low pressure, thus protecting oscilloscope not electrify impact.
- Use to test a spark ignition secondary overlapping wave, overlapping wave parameters, thus achieved the detection, the diagnosis engine ignition position, make each cylinder ignition voltage changing with time directly from the oscilloscope display.
- Attention: Test clips shall not directly clip in spark plug, should be caught in the connection of the spark plugs of insulation wire, in order to prevent the breakdown and causing a shock.
- Attention: To distance other high-voltage at least 2 inches apart, lest produce interference.
- See more on Amazon...
Brand: Hantek | Manufacturer: Hantek
See On Amazon #11
Hantek HT25 Auto Ignition Probe Automotive Oscilloscope Probe High Voltage Inductive Capacitance Ignition Probes Diagnostic-tool Accessories
Asin: B01B17VSH4 | Model: HT25 | PartNumber: HT25 | Ean: 0608641998429, 0743022301556, 0889743490954, 0603281792284 | UPC: 889743490954, 603281792284, 743022301556, 608641998429
Loot Clincher Over Is A Attenuator, Used For Loot High-Pressure Attenuation For Low Pressure, Thus Protecting Oscilloscope Not Electrify Impact.
Auto Ignition Probe Is A Kind Of Inductive Capacitance Sensor, It Matchs With An Oscilloscope.
Connect To Vehicle.
Features
- Connect the ground clip to a good ground on the vehicle
- Connect to vehicle
- Loot clincher over is a attenuator, used for loot high-pressure attenuation for low pressure, thus protecting oscilloscope not electrify impact
- Auto ignition probe is a kind of inductive capacitance sensor, it matchs with an oscilloscope
- See more on Amazon...
Brand: Hantek | Manufacturer: Qingdao Hantek Electronic Co., Ltd
Weight: 0.33 Pounds
See On Amazon #12
Hantek DSO2D15 Digital Storage Oscilloscope 150MHz 1GSa/s 8M,2 Channel,2CH+1CH with Signal Source
Asin: B08MDSG839 | Model: Hantek DSO2D15 | PartNumber: Hantek DSO2D15
Multi-Function - 32 Kinds Of Auto Measurements With Statistics, Real-Time Statistics Of Maximum, Minimum, Standard Deviation And Etc.，Can Save Multiple Data Formats, Such As Settings, Waveforms, Reference Waveforms, Csv, Pictures, Bus Decode And Protocol Analysis: Rs232/Uart, I2c, Spi, Can, Lin;Support Threshold Testing, Free Measurements Within The Screen;.
Excellent Fullfillment - The Stock For This Bench Oscilloscope Is In Amazon Usa Warehouse, And The Delievery Is Handled By Amazon Fullfillment Directly,Which Is Safe And Efficient; If You Have Any Questions About Our Product And Service, Please Feel Free To Contact Our After-Sales Customer Service At Any Time, We Will Solve It For You With Soonest..
Large Tft Lcd Display - 7-Inch 64K True Color Tft Lcd Display With A Resolution Of 800 * 480. Remote Control And U Disk Storage: This Oscilloscope Can Store More Than 1000 Waveforms Information, And Can Upgrade The System Through The Usb Port, Support Plug-And-Play Usb Storage Devices And Communicate With The Computer And Remote Control Through Usb..
Awg Supports - The Hantek Oscilloscope Built-In 1 Channel 25Mhz Waveform Generator,Support Arbitrary Waveform Burst Output, Support Modulation Waveform Output;.
Features
- Powerful Spec - The lab oscilloscope is with 150MHz bandwidth; 8M memory depth; 1 GSa/s real-time sampling rate and Vertical resolution: 8bit 2 channels which are respectively controlled by independent knobs;
- AWG Supports - The hantek oscilloscope Built-in 1 channel 25MHz waveform generator,support arbitrary waveform burst output, support modulation waveform output;
- Multi-function - 32 kinds of auto measurements with statistics, real-time statistics of maximum, minimum, standard deviation and etc. Can save multiple data formats, such as settings, waveforms, reference waveforms, CSV, pictures, BUS decode and protocol analysis: RS232/UART, I2C, SPI, CAN, LIN;Support threshold testing, free measurements within the screen;
- Large TFT LCD Display - 7-inch 64K true color TFT LCD display with a resolution of 800 * 480. Remote Control and U Disk Storage: This oscilloscope can store more than 1000 waveforms information, and can upgrade the system through the USB port, support plug-and-play USB storage devices and communicate with the computer and remote control through USB.
- Excellent Fullfillment - The stock for this bench oscilloscope is in Amazon USA warehouse, and the delievery is handled by Amazon fullfillment directly,which is safe and efficient; If you have any questions about our product and service, please feel free to contact our after-sales customer service at any time, we will solve it for you with soonest.
- See more on Amazon...
Brand: Hantek | Manufacturer: Hantek
Dimensions: 5.90 x 12.50 x 5.50 inches | Weight: 5.50 Pounds
See On Amazon #13
Hantek 1008C PC USB 8CH Automotive Diagnostic Digital Oscilloscope/DAQ/Programmable Generator
Asin: B00BSR98KW | Model: 01HAN1008C | PartNumber: 01HAN1008C | Ean: 0799418588438, 0700220341029, 7705764198439, 0519240055676 | UPC: 519240055676, 799418588438, 700220341029
Usb2.0 Power Supply + Communication Interface, Plug And Play, And Support Hot Plugging..
Hantek 1008C Provides Over 80 Types Of Automotive Diagnostic Function (Ignition/Sensor/Bus Detection/Performe/Starter And Charging Circuits Etc.);.
Easy To Use -- Installs The Pc Software And Start To Use Without Any Other Drivers;.
Features
- this auto diagnostic oscilloscope is with 8Channels, 2.4MSa/s Real-Time Sampling Rate
- EASY TO USE -- Installs the PC software and start to use without any other drivers;
- USB2.0 power supply + communication interface, plug and play, and support hot plugging.
- Hantek 1008C provides Over 80 types of automotive diagnostic function (Ignition/Sensor/Bus detection/Performe/Starter and charging circuits etc.) ;
- See more on Amazon...
Brand: Hantek | Manufacturer: Hantek
Dimensions: 1.38 x 7.48 x 6.57 inches | Weight: 0.77 Pounds
See On Amazon #14
WisTek DSO Shell Oscilloscope Full Assembled with BNC-Clip Cable Probe, 1MSa/s, 0-200KHz, 5mV/div Sensitivity and 2.4-inch Color TFT Display
Asin: B07SZPY9R9
Rising Or Falling Edge Trigger Are Available, Also The Trigger Level Position And Vertical Displacement Are Adjustable. Short-Circuit And Open-Circuit Detection To Find Out The Soldering Error.
Waveform Storage Function: Waveform Will Not Lose When Save/Tune Out The Waveform/Shutdown Waveform. Test Signal Source With 1Khz /3.3V Square Wave. Pls Contact Us If Have Any Quality Issue And Need Support, Will Reply Within 24Hours, Refund Or Replace With A New One.
Observable The Previous Waveform Before Trigger (Negative Delay). Freeze Waveform Display At Any Time (Hold Function). Come With Instructions, Easy To Install And Operate.
Waveform Parameter Digital Display Include: Frequency, Period, Pulse Width, Duty Ratio, Max./Min./Avg./Peak-Peak/Virtual Values And Effective Value; Adopts Arm Cortex-M3 Processor (Stm32f103c8).
Features
- DC Power adapter is included. With Automatic mode, conventional mode and single trigger mode. Convenient to capture the instantaneous waveform. With secondary development on the basis, can be changed to voltmeter, data loggers. 2.4-inch color TFT display
- Waveform parameter digital display include: Frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values and effective value; Adopts ARM Cortex-M3 processor (STM32F103C8)
- Rising or falling edge trigger are available, also the trigger level position and vertical displacement are adjustable. Short-circuit and open-circuit detection to find out the soldering error
- Observable the previous waveform before trigger (negative delay). Freeze waveform display at any time (HOLD function). Come with instructions, easy to install and operate
- Waveform storage function: Waveform will not lose when save/tune out the waveform/shutdown waveform. Test signal source with 1KHz /3.3V square wave. Pls contact us if have any quality issue and need support, will reply within 24hours, refund or replace with a new one
- See more on Amazon...
Brand: wisTeck | Manufacturer: wisTek
See On Amazon #15
Hantek 2D72 Handheld Oscilloscope 70MHz Waveform Generator Multimeter 3 in 1 Multifunction Tester 2CH+AFG+DMM
Asin: B07PWZTNJK | Model: 2D72 | PartNumber: 2D72
Multifunction Digital Multimeter Function, High Sensitivity And Accuracy, Showing Clear, Stronganti-Overload Capability, Easy To Carry. Digital Multimeter Which Can Be Used To Measure Ac/Dc Voltage/Current, Resistance, Diode,Capacitance, On-Off Test..
We Offer 1 Year Warranty With 30 Days Worry-Free Return, So 100% Satisfaction And Zero Hassle Returns Guaranteed. Please Don't Hesitate To Contact Us When You Use The Item..
Simplify Operation, Convenient To Use: 250M Sampling Rate, 70Mhz Bandwidth. 10Mv-10V Vertical Resolution; Auto Automatic Measuring Function; Key Tone Settings, Adjustable Backlight Brightness, Backlight, Duration And Auto Power Off Time. Digital Voltmeter Function, Cursor Measurement, Reference Waveform,Waveform Storage Function..
Features
- Function: Oscilloscope+Multimeter+Waveform Generator; 70 MHz Digital Oscilloscope with 2 channels -- Sample Rate Range 250MSa/s(Single-channel), 125MSa/s(Dual-channel).
- Simplify operation, convenient to use: 250M Sampling rate, 70MHZ Bandwidth. 10MV-10V Vertical resolution; Auto automatic measuring function; Key tone settings, Adjustable backlight brightness, Backlight, duration and auto power off time. Digital voltmeter function, Cursor measurement, reference waveform,waveform Storage function.
- Multifunction Digital Multimeter Function, High sensitivity and accuracy, showing clear, stronganti-overload capability, easy to carry. Digital multimeter which can be used to measure AC/DC voltage/current, resistance, diode,capacitance, on-off test.
- We offer 1 year warranty with 30 days worry-free return, so 100% satisfaction and zero hassle returns guaranteed. Please don't hesitate to contact us when you use the item.
- See more on Amazon...
Brand: Hantek | Manufacturer: Hantek
Weight: 1.00 Pounds
See On Amazon #16
2 in 1 Digital Oscilloscope Multimeter, Scope Meter with 2.5 Msps High Sampling, 2.4 Inch Color Screen, Automatic Waveform Capture Function, DC/AC Voltage/Current Frequency Resistance Diode Test
Asin: B0BGG95BF4 | Model: 82USZHCP2D0007FBA | PartNumber: 82USZHCP2D0007FBA
One-Button Oscilloscope: No Need Oscilloscope Probe, Measuring Waveform Directly. Fast And Accurate Measurement, Clear Waveform Display. 3 Waveform Scanning Modes: Automatic/Conventional/Single. Mass Storage, 100 Data/10 Waveforms..
Overload Protection -Built-In 500Ma/10A Double Protective Tube, Dual Protection Of The Instrument. Input Voltage Is Greater Than 24V, Beep Warning Once. Input Over Range, Beep Warning. And Automatically Shutdown In Case Of No Operations For 15 Minutes..
Considerate Service: And Leolov Provides A Lifetime Service And Technical Support. Please Feel Free To Contaut Us, You Will Get A Reply In 24 Hours..
Led Backlight & Storage / Readout -Analog Broadband Range Up To: Dc/Ac ~ 1Mhz, Display Hold, Storage / Readout Up To 10 Waveforms And 100 Sets Of Measurement Values. 240X320 Color Screen With Led Backlight Which Is Always On.More Clear And Suitable For Working At Night..
Additional Accessories: Come With Universal Compatible Kit--5 Pieces Alligator Clips, Constructed High Quality Of Flexible Pvc/Pa Materials,Ensures That The Test Leads Are Durable,Flexible As Well As Having Properties Like Freeze Resistance And Heat Tolerance. Will Meet Different Test Needs..
Support Multi Waveform Parameters: When Measuring Waveforms, You Can Set Parameters Independently, Such As: Time Base, Amplitude, Waveform Scanning Mode, Etc..
With Multimeter Function: This 2 In 1 Oscilloscope Multimeter Is Suitable For Diagnosing Automotive, Industrial And Household Electrical Problems. This Electrical Tester Is Auto-Ranging And 4000 Counts, Can Accurately Measure Ac/Dc Voltage, Resistance, Ac/Dc Current, Capacitance, Frequency, Diodes, Continuity..
Features
- More Accuracy & Efficient: Dedicated chip, high speeds sampling rate and high bandwidth, automatic waveform capture function, one-key transform to waveform function furing measuring, software calibration technology,memory calibration coefficients, to improve your work efficiency.
- With Multimeter Function: This 2 in 1 oscilloscope multimeter is suitable for diagnosing automotive, industrial and household electrical problems. This electrical tester is auto-ranging and 4000 counts, can accurately measure AC/DC voltage, resistance, AC/DC current, capacitance, frequency, diodes, continuity.
- One-button oscilloscope: no need oscilloscope probe, measuring waveform directly. Fast and accurate measurement, clear waveform display. 3 waveform scanning modes: automatic/conventional/single. Mass storage, 100 data/10 waveforms.
- Support Multi Waveform Parameters: When measuring waveforms, you can set parameters independently, such as: time base, amplitude, waveform scanning mode, etc.
- LED Backlight & Storage / Readout -Analog broadband range up to: DC/AC ~ 1MHz, Display hold, storage / readout up to 10 waveforms and 100 sets of measurement values. 240X320 color screen with LED backlight which is always on.More clear and suitable for working at night.
- Additional Accessories: Come with universal compatible kit--5 pieces alligator clips, constructed high quality of flexible PVC/PA materials,ensures that the test leads are durable,flexible as well as having properties like freeze resistance and heat tolerance. Will meet different test needs.
- Overload Protection -Built-in 500mA/10A double protective tube, dual protection of the instrument. Input voltage is greater than 24V, beep warning once. Input over range, beep warning. And automatically shutdown in case of no operations for 15 minutes.
- Considerate Service: And Leolov provides a lifetime service and technical support. Please feel free to contaut us, you will get a reply in 24 hours.
- See more on Amazon...
Brand: Leolov | Manufacturer: Leolov
Dimensions: 1.77 x 7.49 x 5.51 inches | Weight: 0.79 Pounds
See On Amazon #17
Hantek 6254BD 4-CH Oscilloscope with AWG 250Mhz 1GSa/s 8-pc Set
Asin: B0789DR8XD | Ean: 6763196252250, 0710877491626 | UPC: 710877491626
Heat-Resistant And Scratch-Proof Compact Case, Powered By Connecting To Computer Usb Ports.
Provides Development Library Dll With Labview/Vc/Vb/Qt Development Examples.
Compatible With Win 7/8/10, Android Via H-Scope/Openscope, Linux Via Openhantek, And Osx Through Virtual Box/Machine.
Over 20 Functions, Including Pass/Fail Test, Trigger, Dynamic Cursor Tracking, Waveform Record And Replay.
Features
- 4 analog channels, 1 arbitrary waveform generator, 1GSa/s sampling rate, 250MHz bandwidth
- Over 20 functions, including pass/fail test, trigger, dynamic cursor tracking, waveform record and replay
- Heat-resistant and scratch-proof compact case, powered by connecting to computer USB ports
- Compatible with Win 7/8/10, Android via H-scope/Openscope, Linux via Openhantek, and OSX through virtual box/machine
- Provides development library DLL with Labview/VC/VB/QT development examples
- See more on Amazon...
Brand: Hantek | Manufacturer: Hantek
Dimensions: 4.13 x 6.89 x 0.98 inches | Weight: 1.98 pounds
See On Amazon #18
Hantek 6022BE Laptop PC USB Digital Storage Virtual Oscilloscope 2 Channels 20Mhz Handheld Portable Oscilloscope
Asin: 0201336421 | Ean: 0611550889948 | UPC: 611550889948
2Channels 20Mhz Usb Oscilloscope With Usb2.0 Port - There Is No Need Extra Power Supply For The Portable Oscilloscope, It Can Be Connected To Pc Through The Usb Port For Power Directly, Similar Interface With Desktop Oscilloscope, Easy To Use;.
Powful Function With Small Size - The Usb Oscilloscope Owns Ore Than 20 Kinds Of Automatic Measurement Functions, Pass/Fail Check Function, Suitable For Technical Application,Supports Windows 10, Windows 8, Windows 7, Windows Nt, Windows Xp, Vista..
Hantek 6022Be Is With High Performance, 48Msa/S Real-Time Sampling, 20Mhz Bandwidth.Great Industrial Design, The High Quality Anodized Aluminum Case Is Extremely Durable And Heat-Resistant..
Features
- Any Win10 driver issue, please kindly contact us via Amazon, we will support you to download and install it;
- Hantek 6022BE is with High performance, 48MSa/s real-time sampling, 20MHz bandwidth.Great industrial design, the high quality anodized aluminum case is extremely durable and heat-resistant.
- 2channels 20MHz USB oscilloscope with USB2.0 PORT - there is no need extra power supply for the portable oscilloscope, it can be connected to pc through the USB port for power directly, similar interface with desktop oscilloscope, easy to use;
- POWFUL FUNCTION WITH SMALL SIZE - the usb oscilloscope owns ore than 20 kinds of automatic measurement functions, PASS/FAIL Check function, suitable for technical application,supports Windows 10, Windows 8, Windows 7, Windows NT, Windows XP, VISTA.
- See more on Amazon...
Brand: Hantek | Manufacturer: Hantek
Dimensions: 1.38 x 8.07 x 4.72 inches
See On Amazon #19
Hantek CC-800 AC/DC Current Clamp 5KH Oscilloscope Multimeter Bandwidth 1mV/10mV/A 500A/800A with BNC Connector
Asin: B0BM9CJKSC
Power Electronics Equipments Measurement..
Low Battery Indicator: Red Light On..
The Diameter Of The Measurable Conductor: Up To 30 Mm..
Motor Drive Of Frequency Converter (Or Other Electronics) Measurement..
Features
- Power circuit measurement and malfunction analysis.
- Motor drive of frequency converter (or other electronics) measurement.
- Power electronics equipments measurement.
- The diameter of the measurable conductor: up to 30 mm.
- Low battery indicator: red light on.
- See more on Amazon...
Brand: Hantek | Manufacturer: Hantek
See On Amazon #20
Hantek 6022BE Digital Oscilloscope Portable PC Based 2 Channels 20MHz USB Oscilloscopes
Asin: B0728HBNDV | Model: 6022BE | PartNumber: 6022BE | Ean: 7592223087713
High Performance, 250Ms/S Real-Time Sampling, 20Mhz-80Mhz Bandwidth..
Waveform Average, Persistence, Intensity, Invert, Addition, Subtraction, Multiplication, Division, X-Y Plot..
23 Measurement Functions, Pass/Fail Check, Be Suitable For Technical Application..
Be Suitable For Notebook Computer, Product Line Maintenance, Be Used Easily On Business..
Features
- Standard USBXITM interface, easily inserts into USBXITM housing to make up a combination instrument.
- Be suitable for notebook computer, product line maintenance, be used easily on business.
- High performance, 250MS/s real-time sampling, 20MHz-80MHz bandwidth.
- 23 measurement functions, PASS/FAIL Check, be suitable for technical application.
- Waveform average, persistence, intensity, invert, addition, subtraction, multiplication, division, X-Y plot.
- See more on Amazon...
Brand: Hantek | Manufacturer: Hantek
Dimensions: 6.69 x 9.06 x 2.95 inches | Weight: 1.60 Pounds
See On Amazon
Looking For Something Else?
Search