Tee pipe fittings joint 304 stainless steel high pressure inner wire internal thread NPT thickened (1/4" DN8 )
Asin: B0BWWMJY2H | Ean: 6988589865507
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Operating Temperatures Range From -100 To 220 Degrees C (-148 To 428 Degrees F).
304 Stainless Steel For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability.
Maximum Working Pressure Is 2000Psi..
Tee With Three Openings For Connecting And Branching Three Pipes.
Features
- Female National Pipe Taper (NPT) threads for connecting to male threaded pipes,NPT thread size does not actual diameter, it is only nominal pipe size.
- Tee with three openings for connecting and branching three pipes
- Operating temperatures range from -100 to 220 degrees C (-148 to 428 degrees F)
- Maximum working pressure is 2000PSI.
- 304 Stainless Steel for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- See more on Amazon...
Brand: ZULOW | Manufacturer: ZULOW
See On Amazon Similar To Tee pipe fittings joint 304
#1
Beduan 3/4" Tee Female NPT T Shaped 3 Way Cast Pipe Fitting - Stainless Steel 304 (Pack of 2)
Asin: B07YYVGJ5Z | Model: 1yf-00343-pfs | PartNumber: 1yf-00343-pfs | Ean: 0717049323747 | UPC: 717049323747
Suitable For Male Threaded Pipe..
Maximum Working Pressure: 150 Pounds Per Square Inch..
Operating Temperature: Range From -65 To 250 Degrees F..
Made Of Greater Strength Stainless Steel, Using Durably..
Features
- Tee shape with 3 ways to connect and branch three sections of pipe.
- Made of greater strength stainless steel, using durably.
- Suitable for Male threaded pipe.
- Operating temperature: range from -65 to 250 degrees F.
- Maximum working pressure: 150 pounds per square inch.
- See more on Amazon...
Brand: beduan | Manufacturer: Beduan
Weight: 1.00 Pounds
See On Amazon #2
Beduan Stainless Steel 1/2" G 3 Way Diverter, Movable Cap Flexible Tee Connector for Angled Valve, Bidet, Sprayer, Shower Arm (All 3 way is 1/2 G threaded!!, Thread ID/OD is 19.8MM/3/4")
Asin: B08111SFSP | Model: 1yf-06215-ftf | PartNumber: 1yf-06215-ftf | Ean: 0717049324188 | UPC: 717049324188
Flexible Design: Movable Hex Cap For Flexible Installation.Tips: The Hex Cap Needs To Be Used With The Gasket, Otherwise There May Be Leakage..
Easy Installation: Perfect For Connecting An Angle Valve, Hose Or Faucet Which Is Wall Mounted. Easy To Install For Water Diverting Even In Tight Spaces..
Function: Flexible Connector To Connect 2 Machines – For Those Cannot Whirl But Need To Be Combined..
Material: Made Of High Quality, Beautiful Shape Together With Great Strength Material To Ensure High Pressure And Burst Resistance, Corrosion Resistance..
Features
- All 3 Way is G!! Size: 1/2" G Female(ID:19.8mm), 1/2" G Male(OD:19.8mm), 1/2" G Male(OD:19.8mm). Please check the size before purchasing!!! Teflon tape is recommended for threaded joints.
- Material: Made of high quality, beautiful shape together with great strength material to ensure high pressure and burst resistance, corrosion resistance.
- Flexible Design: Movable Hex Cap for flexible installation.Tips: The hex cap needs to be used with the gasket, otherwise there may be leakage.
- Function: Flexible connector to connect 2 machines for those cannot whirl but need to be combined.
- Easy Installation: Perfect for connecting an angle valve, hose or faucet which is wall mounted. Easy to install for water diverting even in tight spaces.
- See more on Amazon...
Brand: beduan | Manufacturer: beduan
Weight: 0.00 Pounds
See On Amazon #3
Enenes Duct Splitter, 6 Inch 3 Way Duct Connector for Exhaust Fan Dryer Vent Hose Come with 3 PCS Hose Clamps (6 Inch)
Asin: B09LTV6C1V | Ean: 0785378150112, 0715968433196 | UPC: 785378150112, 715968433196
Product Features: Three-Hole Duct Connector Is Smooth, And Its Reasonable Curvature Greatly Reduces The Wind Resistance.This Allows For Smooth Ventilation Of The Ventilation System.Duct Clamps Make Installation Easier And Faster, And The Joints Are Seamless To Achieve A Good Leak-Proof Effect..
Package Included : 1Pack Y Shape Duct Connector +3Pack 6" Duct Clamp.
How To Use:Wipe The Tee First, Then Dock It To The Hose And Fix It With Aluminum Foil Tape. Finally, Use Clamps To Fasten The Secondary Fixing..
Connector Size:3 Way Connector Has A Diameter Of 146Mm (5.8 Inch) Per Interface, Suitable For Hoses Of 150 Mm (6 Inch). Duct Clamps Size: Thickness: 0.023"/0.6Mm,Width: 0.47"/12Mm,Adjustable Size Range From 3.58"-4.49"/91Mm-114Mm..
Features
- Duct Connector Material: Made of high quality ABS plastic, high strength, good toughness and easy processing. Duct Clamp Material: Made of high quality 304 stainless steel material,durable and sturdy.
- Connector Size:3 Way Connector has a diameter of 146mm (5.8 inch) per interface, suitable for hoses of 150 mm (6 Inch). Duct Clamps Size: Thickness: 0.023/0.6mm,width: 0.47/12mm,adjustable size range from 3.58-4.49/91mm-114mm.
- Product features: three-hole duct connector is smooth, and its reasonable curvature greatly reduces the wind resistance.This allows for smooth ventilation of the ventilation system.Duct Clamps make installation easier and faster, and the joints are seamless to achieve a good leak-proof effect.
- How to use:wipe the tee first, then dock it to the hose and fix it with aluminum foil tape. Finally, use clamps to fasten the secondary fixing.
- Package included : 1Pack Y shape duct connector +3Pack 6 Duct Clamp
- See more on Amazon...
Brand: Enenes | Manufacturer: Enenes direct
Dimensions: 0.39 x 0.39 x 0.39 inches | Weight: 0.10 Kilograms
See On Amazon #4
110V-120V 1.5Kw Instant Electric Hot Water Heater Under Kitchen Small Tank 2.5-3.0 Gallon Storage,Rv Trailer Instant Counter Compact Point-of-Use,2 PCs 16 Long 1/2 FIP Stainless Steel Water Hose 11L
Asin: B08B635F6C | Model: AGU-001 | PartNumber: AGU-001 | Ean: 0708257586918 | UPC: 708257586918
【Suitable Scenes】Suitable For Installation In Places Far Away From Hot Water Sources Where Hot Water Cannot Be Obtained In Time! This Small Water Heater Is An Ideal Choice For Kitchens, Bars, Under Sinks, Hair Salons, Rvs, Trailers!.
【Compact Design】It Can Be Shelf-Mounted, Wall-Mounted Or Floor-Standing (The Inlet And Outlet Are Upward); Dimensions: 14.4''L X11.8''W X11.8''H; 9.81 Pounds (4.45Kg); 1/2〃Npt-Npt. 1.5 Kilowatts, 110-120 Volts. 2 Years Warranty And 24H Customer Service Support, Please Feel Free To Contact Us..
【Our Service】If You Have Any Installation Or Product Quality Issues, Please Contact Us In Time, And We Will Be Online For 16 Hours To Help You! Our Water Heater Provides A 2-Year Warranty On Quality!.
【Easy Installation】This Is A Storage Electric Water Heater, With A Knob Temperature Adjustment Design, Easy To Operate And Convenient Temperature Control. The Accessories Such As Exhaust Valve, Tee Joint, Pipe, Etc. Are Complete, Making Installation Fast And Without Additional Costs Or Preparation Time For Accessories..
【Quick Recovery Of Hot Water】Get On-Demand Hot Water According To Your Every Need (Up To Two Sinks At A Time, Heating To The Desired Temperature In 8-15 Minutes)..
【Smart Energy-Saving Inverter】Digital Display Screen, Automatic Hot Water Preservation And Storage. The 3.0 Gallon Use Point Mini Tank Can Be Installed Under The Sink, Providing Hot Water Where You Need It. The Thermal Efficiency Is 98%, With A Maximum Temperature Of 167℉。It Has A Built-In Smart Chip That Heats Up To The Temperature You Set, And Automatically Insulates When It Reaches The Specified Temperature..
【Note】After The Water Heater Is Installed, Make Sure To Fill It With Water Before Turning On The Power. The Pressure Relief Valve Must Be Installed At The Water Inlet (Blue End). If The Pressure Relief Valve Has Water Droplets Flowing Out, Indicating That The Water Pressure Is Greater Than 0.75Mpa (108.7Psi)，Please Contact Us In Time, And We Will Replace It With A 1.0Mpa Pressure Relief Valve For Free!.
Features
- Accessories Includes 2PCs 16inch long 1/2 NPT water pipes, 1*0.75MPa (108.7PSi) pressure relief valve (safety valve), tee, instructions, drain pipe, and hook.
- Note After the water heater is installed, make sure to fill it with water before turning on the power. The pressure relief valve must be installed at the water inlet (blue end). If the pressure relief valve has water droplets flowing out, Indicating that the water pressure is greater than 0.75MPa (108.7PSi) please contact us in time, and we will replace it with a 1.0MPa pressure relief valve for free!
- Suitable Scenes Suitable for installation in places far away from hot water sources where hot water cannot be obtained in time! This small water heater is an ideal choice for kitchens, bars, under sinks, hair salons, RVs, trailers!
- Smart Energy-Saving Inverter Digital display screen, automatic hot water preservation and storage. The 3.0 gallon use point mini tank can be installed under the sink, providing hot water where you need it. The thermal efficiency is 98%, with a maximum temperature of 167 It has a built-in smart chip that heats up to the temperature you set, and automatically insulates when it reaches the specified temperature.
- Easy Installation This is a storage electric water heater, with a knob temperature adjustment design, easy to operate and convenient temperature control. The accessories such as exhaust valve, tee joint, pipe, etc. are complete, making installation fast and without additional costs or preparation time for accessories.
- Quick Recovery of Hot Water Get on-demand hot water according to your every need (up to two sinks at a time, heating to the desired temperature in 8-15 minutes).
- Compact Design It can be shelf-mounted, wall-mounted or floor-standing (the inlet and outlet are upward); Dimensions: 14.4''L x11.8''W x11.8''H; 9.81 pounds (4.45kg); 1/2 NPT-NPT. 1.5 kilowatts, 110-120 volts. 2 years warranty and 24H customer service support, please feel free to contact us.
- Our Service If you have any installation or product quality issues, please contact us in time, and we will be online for 16 hours to help you! Our water heater provides a 2-year warranty on quality!
- See more on Amazon...
Brand: Agust | Manufacturer: AGUST
Dimensions: 14.40 x 11.80 x 11.80 inches | Weight: 8.86 pounds
See On Amazon #5
25 PCS 3/4 inch Pipe PEX Clamps, MISPIRE PEX Cinch Clamps Stainless Steel 304 Pinch Clamps for PEX Pipe Tubing Fitting Connections
Asin: B0CJQXGJB2 | Model: MI-PC-034-25 | PartNumber: MI-PC-034-25
✅ [Leak-Proof & Easy To Use] -These Interlocking Rings Provide A Fast And Reliable Connection Of All Pex Pipes Fittings. Form A Complete 360-Degree Watertight Seal Protection. The Slide The Clamp Ring Onto The Pipe, Push The Pipe Onto The Fitting And Squeeze It With A Clamp Tool. Provide A Firm, Leak-Free And Reliable Crimp Joint Connection..
✅ [Customer Service] -Please Feel Free Contact Mispire Customer Service Team If Any Issues, We Will Do Our Best To Fix The Issue You Meet..
✅ [Widely Applications] -Widely Applications In All Plumbing System - Hydronic Heating System, Air Condition System, Water Heater, Telecommunications Electrical Plumbing, Food Pipeline System Etc. Providing A Strong And Reliable Crimp Fitting Application..
✅ [Premium Quality] -High Precision Pex Clamps Are Made Of 304 Stainless Steel, Has Good Corrosion Resistance, Heat Resistance, Low Temperature Strength And Mechanical Properties, A Good Choice For Long-Term Use. Pex Cinch Clamps Are Used To Seal Various Types Of Pipes..
Features
- [Package & Quantity] Pack of 25, 3/4 inch (23.3mm) PEX cinch clamp rings, fit for 3/4 inch PEX pipe.
- [Premium Quality] -High precision PEX clamps are made of 304 Stainless Steel, has good corrosion resistance, heat resistance, low temperature strength and mechanical properties, a good choice for long-term use. PEX cinch clamps are used to seal various types of pipes.
- [Leak-Proof & Easy to Use] -These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal protection. The slide the clamp ring onto the pipe, push the pipe onto the fitting and squeeze it with a clamp tool. Provide a firm, leak-free and reliable crimp joint connection.
- [Widely Applications] -Widely applications in all plumbing system - Hydronic heating system, air condition system, water heater, Telecommunications electrical plumbing, food pipeline system etc. Providing a strong and reliable crimp fitting application.
- [Customer Service] -Please feel free contact MISPIRE customer service team if any issues, we will do our best to fix the issue you meet.
- See more on Amazon...
Brand: MISPIRE | Manufacturer: MISPIRE
See On Amazon #6
eoere 20 Sets T Pipe Connector Tee Tubing Clamp Fittings Fit for 3/4"(OD 19.1 mm) Stainless Steel Pipe (Doesn't fit US 3/4" Electrical-Metallic Tubing)
Asin: B0CB5ZMYTK | Model: GD125-T20 | PartNumber: GD125-T20
Clamp Thickness: 1.7 Mm, Embedding Max.Length: 1"(25 Mm).
Package Content: 20 Sets Steel T Pipe Clamp Connector(Bolts/Nuts Included).
Pipe Clamps Material: Carbon Steel + Surface Electrogalvanized.
Features
- Fits Metal Pipe O.D.: 3/4"(19.1 mm)
- Pipe Clamps Material: Carbon Steel + Surface Electrogalvanized
- Clamp Thickness: 1.7 mm, Embedding Max.Length: 1(25 mm)
- Package Content: 20 Sets Steel T Pipe Clamp Connector(Bolts/Nuts Included)
- See more on Amazon...
Brand: eoere | Manufacturer: eoere
Dimensions: 0.94 x 2.76 x 0.79 Inches | Weight: 0.15 Pounds
See On Amazon #7
Metalwork 304 Stainless Steel Pipe Fitting, Street Tee, Male Run Tee, 1/8" NPT Male x 1/8" NPT Female x 1/8" NPT Female, 1 Pc
Asin: B07FG1K7XZ | Ean: 7453965851133
Made From Stainless Steel 304 For Strength.
Working Temperature Range: -50℃~+200℃/-58℉~+392℉.
Max Pressure: 16Mpa/2320Psi;.
1/8" Male National Pipe Taper (Npt) Threads On One Run And 1/8" Female Npt Threads On The Other Run And On The Branch.
Features
- Street tee pipe fitting for connecting and branching three pieces of pipe
- 1/8 Male National Pipe Taper (NPT) threads on one run and 1/8 female NPT threads on the other run and on the branch
- Made from stainless steel 304 for strength
- Max Pressure: 16MPa/2320psi;
- Working Temperature Range: -50 ~+200 /-58 ~+392
- See more on Amazon...
Brand: Yoebor | Manufacturer: Metalwork
Weight: 1.00 Pounds
See On Amazon #8
(Pack of 130) EFIELD 1/2" Pex Brass Crimp Fittings: 100 Pieces Pex Stainless Steel Clamps, Tee, Elbow and Coupling 10 Pieces each
Asin: B0846H76T1 | Model: B0846H76T1 | PartNumber: B0846H76T1 | Ean: 0651074171860 | UPC: 651074171860
Resistant To Corrosion Due To Dzr Brass. 304 Stainless Steel Clamps.
Certified By Astm F1807 Nsf/Ansi 61 Nsf 372 For Fitting; Astm F2098 For Cinch Clamps.
Compatible With Stainless Steel Clamp & Copper Crimp Ring Systems. Not Compatible With Expander Fitting System.
Certified Lead Free Pex Fitting Combo: 1/2 " Pex Fitting Tee, Elbow, Coupling 10 Pcs/Each; 100 Pcs 1/2" Stainless Steel Pex Cinch Clamps.
Features
- Directly Supplied by One of the Biggest Pex Manufacturers.
- Certified Lead Free Pex Fitting Combo: 1/2 Pex Fitting Tee, Elbow, Coupling 10 PCS/Each; 100 PCS 1/2 Stainless Steel Pex Cinch Clamps
- Resistant to Corrosion Due to DZR Brass. 304 Stainless Steel Clamps
- Compatible with Stainless Steel clamp & Copper Crimp Ring Systems. NOT Compatible with expander fitting system
- Certified by ASTM F1807 NSF/ANSI 61 NSF 372 for Fitting; ASTM F2098 for Cinch Clamps
- See more on Amazon...
Brand: EFIELD | Manufacturer: Efield
See On Amazon #9
Electric Hot Water Heater 110/120V Small Compact Tank,Rv Tr 2.5-3.0 Gallon Trailer 1.5KW Kitchen Instant Under Sink Counter Cupboard, Food Truck 2 PCs 16 Long 1/2 FIP Stainless Steel Water Hose 11L
Asin: B0BH53BZWQ | Model: FI-01 | PartNumber: FI-01 | Ean: 0755574700053 | UPC: 755574700053
【Safety And Durability】The Inner Tank Is Made Of 304 Stainless Steel, Which Never Rusts. It Uses Cfc-Free Foam Insulation Material, Which Can Maintain The Temperature For 10 Hours. The Inside Has Leakage Protection And Anti-Scald Settings, Improving The Safety Of The Water Heater!.
【Compact Design】It Can Be Shelf-Mounted, Wall-Mounted Or Floor-Standing (The Inlet And Outlet Are Upward); Dimensions: 14.4''L X11.8''W X11.8''H; 9.81 Pounds (4.45Kg); 1/2〃Npt-Npt. 1.5 Kilowatts, 110-120 Volts. 2 Years Warranty And 24H Customer Service Support, Please Feel Free To Contact Us..
【Our Service】If You Have Any Installation Or Product Quality Issues, Please Contact Us In Time, And We Will Be Online For 16 Hours To Help You!.
【Easy Installation】This Is A Storage Electric Water Heater, With A Knob Temperature Adjustment Design, Easy To Operate And Convenient Temperature Control. The Accessories Such As Exhaust Valve, Tee Joint, Pipe, Etc. Are Complete, Making Installation Fast And Without Additional Costs Or Preparation Time For Accessories..
【Quick Recovery Of Hot Water】Get On-Demand Hot Water According To Your Every Need (Up To Two Sinks At A Time, Heating To The Desired Temperature In 8-15 Minutes)..
【Smart Energy-Saving Inverter】Digital Display Screen, Automatic Hot Water Preservation And Storage. The 3.0 Gallon Use Point Mini Tank Can Be Installed Under The Sink, Providing Hot Water Where You Need It. The Thermal Efficiency Is 98%, With A Maximum Temperature Of 167℉。It Has A Built-In Smart Chip That Heats Up To The Temperature You Set, And Automatically Insulates When It Reaches The Specified Temperature..
【Suitable Scenarios】Suitable For Installation In Places Far Away From Hot Water Sources And Cannot Get Hot Water In Time! Under The Sink And Countertop Or Barbershop..
Features
- NOTE Fill the water first, then power on (otherwise it will damage the water heater).
- Suitable Scenarios Suitable for installation in places far away from hot water sources and cannot get hot water in time! Under the sink and countertop or barbershop.
- Safety and Durability The inner tank is made of 304 stainless steel, which never rusts. It uses CFC-Free foam insulation material, which can maintain the temperature for 10 hours. The inside has leakage protection and anti-scald settings, improving the safety of the water heater!
- Smart Energy-Saving Inverter Digital display screen, automatic hot water preservation and storage. The 3.0 gallon use point mini tank can be installed under the sink, providing hot water where you need it. The thermal efficiency is 98%, with a maximum temperature of 167 It has a built-in smart chip that heats up to the temperature you set, and automatically insulates when it reaches the specified temperature.
- Easy Installation This is a storage electric water heater, with a knob temperature adjustment design, easy to operate and convenient temperature control. The accessories such as exhaust valve, tee joint, pipe, etc. are complete, making installation fast and without additional costs or preparation time for accessories.
- Quick Recovery of Hot Water Get on-demand hot water according to your every need (up to two sinks at a time, heating to the desired temperature in 8-15 minutes).
- Compact Design It can be shelf-mounted, wall-mounted or floor-standing (the inlet and outlet are upward); Dimensions: 14.4''L x11.8''W x11.8''H; 9.81 pounds (4.45kg); 1/2 NPT-NPT. 1.5 kilowatts, 110-120 volts. 2 years warranty and 24H customer service support, please feel free to contact us.
- Our Service If you have any installation or product quality issues, please contact us in time, and we will be online for 16 hours to help you!
- See more on Amazon...
Brand: FIPEUN | Manufacturer: FIPEUN
Dimensions: 11.80 x 14.40 x 14.40 inches
See On Amazon #10
Aolemi Pipe Elbow 90 Degree NPT 1/2 Inch Female Plumbing Thread Pipe Fittings 304 Stainless Steel Silver Elbow Plumbing Thread Pipe Fittings 2 Pack
Asin: B07S9QZVKR | Model: B07S9QZVKR | PartNumber: B07S9QZVKR | Ean: 0761272940301 | UPC: 761272940301
【Reliable Design】: Npt 1/2" Female To Npt 1/2" Female 90 Degree,90-Degree Elbow Design Is For Connecting Two Pipes Or Fittings At An Angle.
【Package】: 2 Packs,Include Two Pieces.
【Function】: Pipe Elbows,90 Degree Elbow Pipe Metal Cast Pipe Fittings Best For Diy Furniture,Decor Or Bath Projects.
Features
- All Metal Construction :304 stainless steel,Makes our 1/2 Tee Pipe Adapter Resistant to Corrosion,high temperature,acids, salts, and other minerals
- Function : Pipe Elbows,90 degree elbow pipe metal cast pipe fittings best for DIY furniture,decor or bath projects
- Reliable Design : NPT 1/2 Female to NPT 1/2 Female 90 degree,90-degree elbow design is for connecting two pipes or fittings at an angle
- Package : 2 packs,include two pieces
- See more on Amazon...
Brand: Aolemi | Manufacturer: xing he
Weight: 0.20 pounds
See On Amazon #11
Hooshing 3/4" Tee NPT Female Thread Stainless Steel T Shaped 3 Way Cast Pipe Fitting
Asin: B09BC3ZSCF | Model: 2jq-00340-01st | PartNumber: 2jq-00340-01st
Connections: T Shape With 3 Ways To Connect And Branch Three Sections Of Pipe. 3/4" Npt Female Threaded, Great For Attaching Half Inch Male Thread Fittings And Pipes..
Applications: Used In Air Compressors, Automatic Manufacturing Operations, Aircraft Controls, And Tire Installation In Industries Including Agriculture, Mining, Road Construction, Firefighting, And Aviation..
Specification: Temperature Range From -65 To 250 Degrees ℉. Maximum Working Pressure Of 290 Psi..
Matertial: Made Of Stainless Steel 304 For Strength, Low Carbon Content For Greater Resistance To Corrosion..
Features
- Size: 3/4 x 3/4 x 3/4 Female NPT. It has National Pipe Taper (NPT) threads for creating tighter seals than straight threads.
- Matertial: Made of stainless steel 304 for strength, low carbon content for greater resistance to corrosion.
- Connections: T shape with 3 ways to connect and branch three sections of pipe. 3/4 NPT female threaded, great for attaching half inch male thread fittings and pipes.
- Specification: Temperature range from -65 to 250 degrees . Maximum working pressure of 290 PSI.
- Applications: Used in air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation.
- See more on Amazon...
Brand: Hooshing | Manufacturer: Hooshing
See On Amazon #12
ANPTGHT 5/16" Tee Hose Barb Fitting Stainless Steel Equal Barb 3 Way T shaped Splitter Joint Connector Adapter Union Fitting for Fuel Gas Liquid Air(Thickened version)
Asin: B08YJQWZN6 | Model: aww-123101180 | PartNumber: aww-123101180
【Compatible】Stainless Steel Barbed Fittings Can Be Used With Pvc, Pu, Rubber Hose Or Tubing.The Pipe Clamps Can Create A Tight Seal On Flexible Or Semi-Rigid Hose..
【Usage】 Suitable For Applications In Agriculture, Pharmaceutical, Beer Brewing And Food, Laboratory, Chemical Processing Etc..
【Applicability】 Temperature Range From -100 To +500 Degrees F, Maximum Working Pressure Of 350 Psi..
【Size】5/16"Barb X 5/16"Barb X 5/16"Barb.(This Product Is A Thickened Type, Thicker And Stronger, The Id May Be Slightly Smaller).
Features
- Material barb connector, made of stainless steel 304, last for long lifetime,resistant to corrosion,low magnetic permeability.
- Size 5/16Barb x 5/16Barb x 5/16Barb.(This product is a thickened type, thicker and stronger, the ID may be slightly smaller)
- Compatible stainless steel barbed fittings can be used with PVC, PU, Rubber hose or tubing.The pipe clamps can create a tight seal on flexible or semi-rigid hose.
- Applicability Temperature range from -100 to +500 degrees F, Maximum working pressure of 350 psi.
- Usage Suitable for applications in agriculture, pharmaceutical, beer brewing and food, laboratory, chemical processing etc.
- See more on Amazon...
Brand: ANPTGHT | Manufacturer: ANPTGHT
See On Amazon #13
Beduan Push to Connect Fitting 1/4" OD Nickel-Plated Copper Pneumatic Air Fitting Straight Union Tube Connector (Pack of 5)
Asin: B07R5DS8NR | Model: 1kl-07651-spc | PartNumber: 1kl-07651-spc | Ean: 0741722649220 | UPC: 741722649220
Working Pressure:0-2.0Mpa | 0-290Psi / Applicable Tube:Pu / Pa / Pe / Pvc.
Working Temperature:0-60°C | 32～140°F/Negative Pressure:-100Kpa | -29.5 In Hg.
Body:Nickel-Plated Copper/Lock Claw:304 Stainless Steel(Sus)Seal O-Ring:Nbr..
Fluid Admitted:Air Vacuum Water (No Freezing).
Features
- Type:Push in fitting/Push to connect / Size:1/4" Straight Union Connector
- Fluid Admitted:Air Vacuum Water (no freezing)
- Working Pressure:0-2.0MPa | 0-290psi / Applicable Tube:PU / PA / PE / PVC
- Body:Nickel-Plated Copper/Lock Claw:304 Stainless Steel(SUS)Seal O-ring:NBR.
- Working Temperature:0-60 C | 32 140 F/Negative Pressure:-100Kpa | -29.5 In Hg
- See more on Amazon...
Brand: beduan | Manufacturer: Beduan
Weight: 0.00 Pounds
See On Amazon #14
eoere 10 Sets Pivot Tee Pipe Fittings Connector, Tee Adjustable 2 Way Fence Clamp, Fit for 1"(OD 25.4 mm) Stainless Steel Pipe (Doesn't fit US 1" Electrical-Metallic Tubing)
Asin: B0CG8Y3NQK
Clamp Thickness: 2Mm, Embedding Max.Length: 1-1/8"(29Mm).
Package Content: 10 Sets Pivot Tee Joint Sets(Bolts/Nuts Included).
Pipe Clamps Material: Carbon Steel + Surface Electrogalvanized.
Features
- Fits Metal Pipe O.D.: 1"(25.4 mm)
- Pipe Clamps Material: Carbon Steel + Surface Electrogalvanized
- Clamp Thickness: 2mm, Embedding Max.Length: 1-1/8(29mm)
- Package Content: 10 Sets Pivot Tee Joint Sets(Bolts/Nuts Included)
- See more on Amazon...
Brand: eoere | Manufacturer: eoere
Dimensions: 0.98 x 3.15 x 2.60 inches
See On Amazon #15
TAISHER 2PCS Stainless Steel Tee Pipe Fittings, 1" x 1" x 1" NPT Female Pipe Fittings
Asin: B093NYCDFM
304 Stainless Steel For Corrosion Resistance, Ductility At High Temperatures, And Low Magnetic Permeability.
Maximum Working Pressure Is 300Psi..
Operating Temperatures Range From -53 To 121 Degrees C (-65 To 250 Degrees F).
Female National Pipe Taper (Npt) Threads For Connecting To Male Threaded Pipes,Npt Thread Size Does Not Actual Diameter, It Is Only Nominal Pipe Size..
Features
- Tee with three openings for connecting and branching three pipes
- Female National Pipe Taper (NPT) threads for connecting to male threaded pipes,NPT thread size does not actual diameter, it is only nominal pipe size.
- 304 Stainless Steel for corrosion resistance, ductility at high temperatures, and low magnetic permeability
- Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)
- Maximum working pressure is 300PSI.
- See more on Amazon...
Brand: TAISHER | Manufacturer: TAISHER
Warranty: 1 year Warranty
See On Amazon #16
DAN SPEED 1 Inch Male x Female NPT Ball Valve S304 Stainless Steel,Full Port Heavy Duty for Water, Oil, and Gas,1000WOG (1 inch)
Asin: B0B8CZNQV8 | Model: NPT | PartNumber: NPT
Temp Range:-60 F To 450 F.
Fluid Temp Range: -20°F To 410°F.
Nominal Working Pressure:1000 Wog:Max 1000 Psi For Water, Oil, Gas..
Made Of S304 Stainless Steel.
Features
- Product Size:1 Inch Male x Female NPT
- Made of S304 Stainless Steel
- Temp Range:-60 F to 450 F
- Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas.
- Fluid temp range: -20 f to 410 f
- See more on Amazon...
Brand: DAN SPEED | Manufacturer: DS
Dimensions: 3.00 x 5.00 x 2.00 inches
See On Amazon #17
GDFYMI Pipe Fittings, Casted Male Tee Fitting, 3 Way Stainless Steel 1/2" NPT Male Threaded, T Pipe Hose Fitting 3 Sided, Intersection Fitting for Fuel/Air/Water/Boat/Gas/Oil (2Pcs)
Asin: B0BFF2V447 | Model: Tee Fitting6120 | PartNumber: Tee Fitting6120
🎉【Working Limit】Operating Temperature Range From -20℃ To 200℃/ -4℉ To 392℉; Working Pressure Is 290 Psi. Suitable For Use In Automotive, Nautical, Industrial, And Commercial Applications..
🎉【Wide Applications】Quality Fitting With Solid Construction Can Be Used To Connect Hoses For Air, Inert Gases, Water, Fuel, Oil, Nature, Manufactured, Mixed, Liquefied Petroleum, Etc..
🎉【Premium Material】Made Of High Quality 304 Stainless Steel, Which Is Durable, Stable, Rust And Corrosive Resistance And Good For Long Time Using..
🎉【Dimension】Male Inner Diameter: 15.4Mm/ 0.60"; Size: 56Mm*39Mm/ 2.20" * 1.53"(L*W). Excellent Durabiliity For Truck, Car, Boat, Garden, Plumbing, Heater, Furnace Repair..
Features
- Package Content 2Pcs 1/2" NPT Male Threaded 3 Way Pipe Fitting. Designed with three openings for connecting and branching three pipes or tubes, suitable for different media.
- Dimension Male Inner Diameter: 15.4mm/ 0.60; Size: 56mm*39mm/ 2.20 * 1.53(L*W). Excellent durabiliity for truck, car, boat, garden, plumbing, heater, furnace repair.
- Working Limit Operating Temperature range from -20 to 200 / -4 to 392 ; Working Pressure is 290 PSI. Suitable for use in Automotive, Nautical, Industrial, and Commercial applications.
- Premium Material Made of high quality 304 stainless steel, which is durable, stable, rust and corrosive resistance and good for long time using.
- Wide Applications Quality fitting with solid construction can be used to connect hoses for air, inert gases, water, fuel, oil, nature, manufactured, mixed, liquefied petroleum, etc.
- See more on Amazon...
Brand: GDFYMI | Manufacturer: GDFYMI
Dimensions: 0.90 x 2.20 x 1.53 inches | Weight: 0.17 Pounds
See On Amazon #18
YuanTenhwy 2 PCS 3/8"(10mm) Brass Hose Barb Tee Fittings For 3/8" ID Hose with 7 PCS Pipe Clamps Barbed Hose Fitting Intersection Split Splicer Joint Union Adapter Hose Rapair Kit 3 Way
Asin: B0CB6L8W4S | Model: 3/8-T-2pcs | PartNumber: 3/8-T-2pcs | Ean: 0720490822608 | UPC: 720490822608
【Material】: The 3/8 Inch Air Tee Hose Barbed Fitting Is Made Of Brass, And The Hose Clamp Is Made Of 304 Stainless Steel;.
【Application Scenarios】：It Is Applicable To Pipeline Installation 、Maintenance、Rapair And Split, And Is Often Used To Assist In The Transportation Of Air、 Water、Gas、Oil And So On..
【Features】: Heavy T Shaped Brass Barbs And Thickened Wall, Higher Strength And Very Rugged.Corrosion Resistance, Dimensions In Line With Standards, And Overall Smooth Without Burrs; The Solid Barb And Hose Clamp Ensure That The Hose And The Hose Barb Fittings Are Well Sealed During Connection, And Are Not Easy To Leak;.
【Packing List】: 2 Pcs Of 3-Way(Type T) Hose Barbs Fittings With 7 Pcs Of Stainless Steel Hose Clamps;.
Features
- Size : The outer diameter of The Tee Hose barb fitting is 3/8 inch (10mm),suitable for connecting 3/8"(10mm) inner diameter hose;
- Packing list : 2 PCS of 3-way(Type T) Hose barbs fittings with 7 PCS of stainless steel hose clamps;
- Material : The 3/8 inch air tee hose barbed fitting is made of brass, and the hose clamp is made of 304 stainless steel;
- Features : Heavy T Shaped Brass Barbs and thickened wall, higher strength and very rugged.corrosion resistance, dimensions in line with standards, and overall smooth without burrs; The solid barb and hose clamp ensure that the hose and the Hose barb fittings are well sealed during connection, and are not easy to leak;
- Application Scenarios It is applicable to pipeline installation maintenance rapair and split, and is often used to assist in the transportation of air water gas oil and so on.
- See more on Amazon...
Brand: YuanTenhwy | Manufacturer: YuanTenhwy
Dimensions: 0.60 x 3.90 x 0.40 inches
See On Amazon #19
Beduan Push to Connect Tube Fitting Union Tee, Copper Nickle-Plated 1/4" Tube OD 3 Way Tee Shaped Union Adapter Fitting (Pack of 2)
Asin: B07RBMJW6B | Model: 1kl-08001-tqc | PartNumber: 1kl-08001-tqc
Working Pressure:0-5.88Mpa | 0-853.4Psi(Heavy Duty)/Applicable Tube:Pu / Pa / Pe / Pvc.
Working Temperature:0-60°C | 32～140°F. Worked Great With The Air Bags For Truck, Air Brake System, Hdraulic System, Industrial Pneumatic Tools And Other Applications..
Seal O-Ring:Nbr/ Lock Claw:304 Stainless Steel /Body: Nickle-Plated Durable Copper Material..
Fluid Admitted:Air Vacuum Water (No Freezing).
Features
- Type:Push in fitting/Push to connect /Size:1/4 " Tube Tee Connector
- Fluid Admitted:Air Vacuum Water (no freezing)
- Working Pressure:0-5.88MPa | 0-853.4psi(Heavy duty)/Applicable Tube:PU / PA / PE / PVC
- Seal O-ring:NBR/ Lock Claw:304 Stainless Steel /Body: Nickle-plated durable copper material.
- Working Temperature:0-60 C | 32 140 F. Worked great with the air bags for truck, air brake system, hdraulic system, industrial pneumatic tools and other applications.
- See more on Amazon...
Brand: beduan | Manufacturer: Beduan
See On Amazon #20
Nfomruyy 304 Stainless Steel Female Tee, 1" NPT Female Tee 3-Way Cast Fitting Fitting (1", 1)
Asin: B0CFZW5RK4 | Model: Nf-y3T-1201 | PartNumber: Nf-y3T-1201 | Ean: 0190949825038 | UPC: 190949825038
Standard Thread: American Standard Pipe Thread Npt Taper Thread (National Pipe Taper Thread Npt Is A Thread Code, Not A Unit Of Length). 1" Npt Female Thread Tee Joint..
The Pipe Fittings Are Widely Used In Oil And Gas Industry, Petrochemical Industry, Power Plant, Steel Industry, Chemical Industry, Etc..
Made Of High-Quality 304 Stainless Steel, It Has High Fastness And Durability. Its Surface Is Smooth And Round Without Burrs, And Can Be Used In Various Environments. It Is Anti-Corrosion And Will Not Cause Damage To Your Pipes. Excellent Workmanship, Deep Thread, Neat And Clear Lines, Uniform Force, Not Easy To Slip During Installation..
Working Temperature Range: -40°C~+400°C/-104°F~+752°F; Working Pressure: 227.52Psi ..
Features
- 304 stainless steel internal thread tee joint, easy to replace and install. Tee with three openings for connecting and branching three lengths of pipe.
- Working temperature range: -40 C~+400 C/-104 F~+752 F; working pressure: 227.52PSI .
- Standard thread: American standard pipe thread NPT taper thread (National pipe taper thread NPT is a thread code, not a unit of length). 1 NPT female thread tee joint.
- Made of high-quality 304 stainless steel, it has high fastness and durability. Its surface is smooth and round without burrs, and can be used in various environments. It is anti-corrosion and will not cause damage to your pipes. Excellent workmanship, deep thread, neat and clear lines, uniform force, not easy to slip during installation.
- The pipe fittings are widely used in oil and gas industry, petrochemical industry, power plant, steel industry, chemical industry, etc.
- See more on Amazon...
Brand: Nfomruyy | Manufacturer: Nfomruyy
Dimensions: 1.00 x 2.00 x 1.00 inches
See On Amazon
Looking For Something Else?
Search