Tool parts BT30 45 Degree Pull Stud Retention Knob 20CrMnTi for CNC Tool Holder Replace
Asin: B0BX3626CY | Ean: 6099312683685
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Package Included: 1Pcs/ 1 Set Or Depend On Your Selection..
Made Of High Quality Material, Durability And Reliability..
The Picture Can Tell More Than We Can, What You See Is What You Will Receive..
Every Side Also Should Be Compared. It Must Be Same. We Will Not Responsible If Our Item Does Not The Same With Your Need..
Features
- Always check and compare item appearance, color and size before you make a purchase.
- Every side also should be compared. It must be same. We will not responsible if our item does not the same with your need.
- Package included: 1Pcs/ 1 set or depend on your selection.
- The picture can tell more than we can, what you see is what you will receive.
- Made of high quality material, durability and reliability.
- See more on Amazon...
Brand: Generic | Manufacturer: mc-toolparts
See On Amazon Similar To Tool parts BT30 45 Degree
#1
HGC 10pcs BT30 45 Degree Pull Stud Retention Knob CNC Milling Tool Holder
Asin: B07RPB3Q8G | Model: AM-HGCBD7686 | PartNumber: AM-HGCBD7686 | Ean: 0746362375782 | UPC: 746362375782
Precision, Overall Anti-Rust. Have Sufficient Tensile Strength..
Head Diameter: 11 Mm, Neck Diameter: 7 Mm, Full Length: 43 Mm, Angle Degree: 45 Degrees.
Hard Wear-Resistant Surface. Mas Specification Pull-Head Screws With Bt Standard Shank..
Package Include:10 X Bt30 Pull Stud.
Features
- Suitable for machining center, CNC knife handle, connecting, fasteners
- Package Include:10 x BT30 pull stud
- Precision, overall anti-rust. Have sufficient tensile strength.
- Hard wear-resistant surface. MAS specification pull-head screws with BT standard shank.
- Head Diameter: 11 mm, Neck Diameter: 7 mm, Full Length: 43 mm, Angle Degree: 45 degrees
- See more on Amazon...
Brand: HGC | Manufacturer: Dazhong Machinery
See On Amazon #2
Shars BT30 Universal H/V CNC Tool Holder Tightening Fixture 202-2630 M
Asin: B081H5WSBQ | Model: 202-2610-parent | PartNumber: 202-2610-parent
Brand: Shars | Manufacturer: Shars
See On Amazon #3
BT30 ER32-45L Balance Collet Chuck G2.5 30000RPM CNC Tool Holder With Pull Stud Milling Lathe (1)
Asin: B0CCNWZXJ4 | Model: BT30 ER32 45L | PartNumber: BT30 ER32 45L | Ean: 0768399608268 | UPC: 768399608268
Dynamic Balance Treatment:Made Using German Dynamic Balancing Equipment, With A Rotational Speed Of Up To 30000 Rpm, Suitable For Use In Precision Cnc Centers.
Testing Before Shipment:All Tool Holders Are Tested Before Shipment, Guaranteed Quality.
Internal Control Precision Grinding:With The Chuck Tightly Fitting With The Tool Holder, Increases The Clamping Force And Rigidity Of The Tool, Resulting In Faster Cutting Speed And Improved Processing Efficiency.
High Precision:Deep Cooling Qualitative Treatment, Not Easy To Deform, Stable Accuracy, While Improving The Product's Wear Resistance, Corrosion Resistance, And Fatigue Strength. After Assembling The Up Chuck, The Tool Swing Accuracy Is ≤ 0.001Mm.
Features
- Preferred Materials:20CrMnTi steel is selected, carburized and hardened, with a carburized thickness >0.8mm. The surface is hard and the interior has toughness Makes it durable and long life.
- High Precision:Deep cooling qualitative treatment, not easy to deform, stable accuracy, while improving the product's wear resistance, corrosion resistance, and fatigue strength. After assembling the UP chuck, the tool swing accuracy is 0.001mm
- Dynamic Balance Treatment:Made using German dynamic balancing equipment, with a rotational speed of up to 30000 rpm, suitable for use in precision CNC centers
- Internal Control Precision Grinding:with the chuck tightly fitting with the tool holder, increases the clamping force and rigidity of the tool, resulting in faster cutting speed and improved processing efficiency
- Testing before shipment:All tool holders are tested before shipment, guaranteed quality
- See more on Amazon...
Brand: HOZLY | Manufacturer: HOZLY
Dimensions: 2.16 x 5.00 x 2.16 inches
See On Amazon #4
uxcell BT30 45 Degree Pull Stud Retention Knob 20CrMnTi High Precision Hardness for CNC Tool Holder Replace
Asin: B0B6PRXVLZ | Model: a22040400ux0170 | PartNumber: a22040400ux0170
Size - Taper: Bt30; Thread: M12 Head; Angle: 45 Degree.
Retention Knob - Please Check The Part To See If It Fits Your Model, Pick The Right Item You Need.
Application - Suitable For Machining Center, Cnc Knife Handle, Connecting, Fasteners.
Surface - Surface Black Oxide Treatment Offers Higher Wear Resistance And Corrosion Resistance.
Features
- Material - Made of good quality 20CrMnTi, with high hardness, good rust resistance long durability
- Surface - Surface black oxide treatment offers higher wear resistance and corrosion resistance
- Size - Taper: BT30; Thread: M12 Head; Angle: 45 degree
- Application - Suitable for machining center, CNC knife handle, connecting, fasteners
- Retention Knob - Please check the part to see if it fits your model, Pick the right item you need
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #5
N / A 5pcs BT30 45 Degree Pull Stud Retention Knob CNC Milling Tool Holder
Asin: B08C2W2T7V | Model: AMSYBD7857 | PartNumber: AMSYBD7857 | Ean: 0799132985209 | UPC: 799132985209
Package Include:5 X Bt30 Pull Stud.
Features
- 5pcs BT30 45 Degree Pull Stud Retention Knob CNC Milling Tool Holder
- Package Include:5 x BT30 pull stud
- See more on Amazon...
Brand: N / A | Manufacturer: Liu Machine
See On Amazon #6
5pcs BT30 45 Degree Pull Stud Retention Knob CNC Milling Tool Holder (BT30)
Asin: B09SKWPKYL | Model: BT30 | PartNumber: BT30 | Ean: 0730635452744 | UPC: 730635452744
Head Diameter: 11 Mm, Neck Diameter: 7 Mm, Full Length: 43 Mm, Angle Degree: 45 Degrees.
Service: 100% Satisfaction Guarantee And Reliable Customer Service Within A 24 Hour Time Support, 30 Day Back Money Guarantee - 12 Month Warranty.
Package Include:5 X Bt30 Pull Stud.
Precision, Have Sufficient Tensile Strength.Hard Wear-Resistant Surface. Mas Specification Pull-Head Screws With Bt Standard Shank..
Features
- Suitable: for machining center, CNC knife handle, connecting, fasteners
- Precision, Have sufficient tensile strength.Hard wear-resistant surface. MAS specification pull-head screws with BT standard shank.
- Head Diameter: 11 mm, Neck Diameter: 7 mm, Full Length: 43 mm, Angle Degree: 45 degrees
- Package Include:5 x BT30 pull stud
- Service: 100% Satisfaction guarantee and reliable customer service within a 24 hour time support, 30 day back money guarantee - 12 month warranty
- See more on Amazon...
Brand: N\B | Manufacturer: N\B
See On Amazon #7
Hilitand 2pcs BT30 45 Degree Wrench Pull Studs Male Thread Retention Knobs With Center Hole For CNC Milling Tool Holder
Asin: B07QS61659 | Ean: 0748018203791 | UPC: 748018203791
Applicationthe Tool Is Suitable For Cnc Machine.It Has Small Body And It Is Easy To Use..
Perfect Tools: Convenient To Carry And Use, Safe And For Long Term Use, Easy To Use With Simple Instructions..
Uniquethere Is A 45 Degree Pull Studs Hand Tool And Is Mas Specification Pull-Head Screws With Bt Standard Shank..
High-Gradethis 45 Degree Wrench Pull Studs Tool Is Made Of High-Grade Carbon Steel Material, Easy To Use,Heat Treated, Hrc50 Degree..
Features
- NOTE: 2pcs BT30 CNC Milling Tool is 45 .
- high-gradeThis 45 Degree Wrench Pull Studs Tool is made of high-grade carbon steel material, easy to use,heat treated, HRC50 degree.
- APPLICATIONThe Tool is suitable for CNC machine.It has small body and it is easy to use.
- UNIQUEThere is a 45 Degree pull studs hand tool and is MAS specification pull-head screws with BT standard shank.
- PERFECT TOOLS: Convenient to carry and use, safe and for long term use, easy to use with simple instructions.
- See more on Amazon...
Brand: Hilitand | Manufacturer: Hilitand
Dimensions: 0.39 x 1.97 x 0.39 inches | Weight: 0.13 pounds
See On Amazon #8
BT30 ER32 1"L TOOL HOLDER G2.5 30,000RPM HIGH PRECISION
Asin: B0BGJFL2JF | Model: bt30er3220 | PartNumber: bt30er3220 | Ean: 0676525280847 | UPC: 676525280847
Wood Cutting.
High Grade Carbon Steel, Precision Ground.
0.01Mm (0.0004") Run-Out Tolerance.
Holds All Er32 Collets.
Features
- BT30 ER32 COLLET CHUCK TOOL HOLDER
- Holds all ER32 collets
- WOOD CUTTING
- 0.01MM (0.0004) Run-Out Tolerance
- High Grade Carbon Steel, Precision Ground
- See more on Amazon...
Brand: iCarbide | Manufacturer: iCarbide
Dimensions: 3.00 x 6.00 x 3.00 inches
See On Amazon #9
2x BT30 45 Degree M12 Pull Stud Retention Knob CNC Milling Tool Holder
Asin: B07G22BVWT | Model: BT30 | PartNumber: BT30 | Ean: 0736900823356 | UPC: 736900823356
Angle Degree: 45 Degrees.
Package Include: 2 X Knob.
Thread: M12.
Brand: Yodaoke | Manufacturer: Yodaoke
Weight: 0.00 pounds
See On Amazon #10
BT30 Tool Holder Tightening Fixture fits All BT30 Tool Holds
Asin: B07VCXM63Y | Model: BT30/40/50 | PartNumber: BT30/40/50
Modern Design, Protect Conical Surface Of Tool Holder..
Adopt New Material, Detailed And Comprehensive Protection..
Sliding Block Positioning Design, Correct Orientation And Non-Skid..
Realize Double-End Mouting, Facilitate Mount And Dismount..
Features
- Fits BT30 CNC tool holder
- Realize Double-end Mouting, facilitate mount and dismount.
- Modern design, protect conical surface of tool holder.
- Sliding block positioning design, correct orientation and non-skid.
- Adopt new material, detailed and comprehensive protection.
- See more on Amazon...
Brand: SFX | Manufacturer: Luoyang SFX Industrial Technology Co.,Ltd
Weight: 7.05 pounds
See On Amazon #11
1pc BT30 Retention Knob Spanner and 1pc BT30 Tool Holder Tightening Fixture for BT30 Tool Holder
Asin: B07JK62DZW
Original Sliding Positioning Block Design, Accurate Positioning, Ensure Non-Slipping During Mount And Dismount Process; The Material Is Quench Hardening..
Package: 1 Pc Bt30 Double End Tightening Fixture + 1 Pc Bt30 Pull Stud Wrench.
Pull Stud Wrench Fits Bt30 Pull Stud Retention.
Tightening Fixture Fits Bt30 Tool Holder.
Features
- 1 Set BT30 Double-End Tightening Fixture and 1 PC BT30 Pull Stud Wrench
- Tightening Fixture Fits BT30 Tool Holder
- Original sliding positioning block design, accurate positioning, ensure non-slipping during mount and dismount process; The material is quench hardening.
- Pull Stud Wrench Fits BT30 Pull Stud Retention
- PACKAGE: 1 pc BT30 Double End Tightening Fixture + 1 pc BT30 pull stud wrench
- See more on Amazon...
Brand: SFX | Manufacturer: Luoyang Xincheng Precision Machinery Co.,Ltd
Dimensions: 5.91 x 7.92 x 4.81 inches | Weight: 7.21 Pounds
See On Amazon #12
uxcell BT50 45 Degree Pull Stud Retention Knob 20CrMnTi Hole Type for CNC Tool Holder Replace
Asin: B0B6PQ5VKR | Model: a22040400ux0176 | PartNumber: a22040400ux0176
Size - Taper: Bt50; Thread: M24 Head; Angle: 45 Degree.
Retention Knob - Please Check The Part To See If It Fits Your Model, Pick The Right Item You Need.
Application - Suitable For Machining Center, Cnc Knife Handle, Connecting, Fasteners.
Surface - Surface Black Oxide Treatment Offers Higher Wear Resistance And Corrosion Resistance.
Features
- Material - Made of good quality 20CrMnTi, with high hardness, good rust resistance long durability
- Surface - Surface black oxide treatment offers higher wear resistance and corrosion resistance
- Size - Taper: BT50; Thread: M24 Head; Angle: 45 degree
- Application - Suitable for machining center, CNC knife handle, connecting, fasteners
- Retention Knob - Please check the part to see if it fits your model, Pick the right item you need
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #13
uxcell BT50 45 Degree Pull Stud Retention Knob 20CrMnTi High Precision Hardness for CNC Tool Holder Replace
Asin: B0B6PPSTK5 | Model: a22040400ux0172 | PartNumber: a22040400ux0172
Size - Taper: Bt50; Thread: M24 Head; Angle: 45 Degree.
Retention Knob - Please Check The Part To See If It Fits Your Model, Pick The Right Item You Need.
Application - Suitable For Machining Center, Cnc Knife Handle, Connecting, Fasteners.
Surface - Surface Black Oxide Treatment Offers Higher Wear Resistance And Corrosion Resistance.
Features
- Material - Made of good quality 20CrMnTi, with high hardness, good rust resistance long durability
- Surface - Surface black oxide treatment offers higher wear resistance and corrosion resistance
- Size - Taper: BT50; Thread: M24 Head; Angle: 45 degree
- Application - Suitable for machining center, CNC knife handle, connecting, fasteners
- Retention Knob - Please check the part to see if it fits your model, Pick the right item you need
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #14
uxcell BT30 45 Pull Stud Retention Knob Water Cooling M12 Thread for CNC Tool Holder Replace
Asin: B0B4W2NW9D | Model: a22040300ux0127 | PartNumber: a22040300ux0127
Size - Taper: Bt30; Thread: M12 Head; Angle: 45 Degree.
Retention Knob - Please Check The Part To See If It Fits Your Model, Pick The Right Item You Need.
Application - Suitable For Machining Center, Cnc Knife Handle, Connecting, Fasteners.
Surface - Surface Black Oxide Treatment Offers Higher Wear Resistance And Corrosion Resistance.
Features
- Material - Made of good quality 40Cr, with high hardness, good rust resistance long durability.
- Surface - Surface black oxide treatment offers higher wear resistance and corrosion resistance
- Size - Taper: BT30; Thread: M12 Head; Angle: 45 degree
- Application - Suitable for machining center, CNC knife handle, connecting, fasteners
- Retention Knob - Please check the part to see if it fits your model, Pick the right item you need
- See more on Amazon...
Brand: uxcell | Manufacturer: uxcell
See On Amazon #15
Grimmstr 1 PCS 4 Flap Pull Claw External Thread 45 Degree Clamp Lathe Cutter Milling CNC Machining BT30
Asin: B0D2RHBK1P | Ean: 4861097547252
Stable Performance And High Reliability, Perfect Replacement For Your Old Products.
Please Check All Pictures And Compare With Your Used Parts To Make Sure It Will Fit.
Manufactured According To Quality Control Standards, Not Easily Damaged And Has A Long Service Life.
Features
- New quality, Replace directly to your device
- Manufactured according to quality control standards, not easily damaged and has a long service life
- Stable performance and high reliability, perfect replacement for your old products
- Please check all pictures and compare with your used parts to make sure it will fit
- See more on Amazon...
Brand: Grimmstr | Manufacturer: Grimmstr
Dimensions: 1.18 x 3.15 x 1.18 inches | Weight: 0.13 pounds
See On Amazon #16
Yctze 2pcs BT30 CNC 45 Degree Pull Stud Retention Knob for CNC Milling Tool Holder, Ideal for Machine Tools and Accessories
Asin: B0CTH4GMK6 | Model: Yctzedrzbe1250x | PartNumber: Yctzedrzbe1250x
High Qualitythis 45 Degree Wrench Pull Studs Tool Is Made Of Carbon Steel Material, Durable To Use,Heat Treated, Hrc50 Degree..
Scope Of Application: Cnc Machining Center.
Angle Degree: 45 Degrees.
Mas Specification Pullhead Screws With Bt Standard Shank..
Features
- Adopt imported steel, heat treated, HRC50 degree.
- Mas Specification PullHead Screws With Bt Standard Shank.
- HIGH QUALITYThis 45 Degree Wrench Pull Studs Tool is made of carbon steel material, durable to use,heat treated, HRC50 degree.
- Angle Degree: 45 degrees
- Scope of application: CNC machining center
- See more on Amazon...
Brand: Yctze | Manufacturer: Yctze
See On Amazon #17
Tool Part for BT30 BT40 BT50 High Precision Pull Stud Rivet 45 Degree Fixed Knob, CNC Machining Part Tool Holder for CNC Milling Cutter - (Hole Diameter: BT30)
Asin: B0CPQ61F59
Brand: Generic | Manufacturer: Midwod
See On Amazon #18
42CrMo Alloy Steel BT30 Pull Stud Wrench, 45 Degree Retention Knob Spanner for CNC Removal
Asin: B0CLJSYPGT | Model: Sanpylut38dq9o4v | PartNumber: Sanpylut38dq9o4v
[Precise Machined] The Slot Position Undergoes Precise Machining Treatment, Preventing Contact Wear And Minimizing Theof Damage..
[User Friendly Design] The Wrench Features A User Friendly Design That Prevents The Studs From Falling Off After Disassembly. This Design Ensures Convenience, Efficiency, And Saves Effort During Operation..
[Rust Prevention] Theof The Wrench Undergoes A Black Treatment To Resist Rust, While The Rubber Handle Provides A Comfortable And Ergonomic Grip, Ensuring Ease Of Use..
[Accurate Fixation] 45 Degree Opening Design, This Wrench Provides Precise And Secure Fixation Of Pull Studs, Preventing Slippage..
Features
- [42CrMo Material] This pull stud wrench is made of 42CrMo material, ensuring higher hardness and a tighter grip, while being resistant to deformation.
- [Accurate Fixation] 45 degree opening design, this wrench provides precise and secure fixation of pull studs, preventing slippage.
- [Precise Machined] The slot position undergoes precise machining treatment, preventing contact wear and minimizing theof damage.
- [Rust Prevention] Theof the wrench undergoes a black treatment to resist rust, while the rubber handle provides a comfortable and ergonomic grip, ensuring ease of use.
- [User Friendly Design] The wrench features a user friendly design that prevents the studs from falling off after disassembly. This design ensures convenience, efficiency, and saves effort during operation.
- See more on Amazon...
Brand: Sanpyl | Manufacturer: Sanpyl
See On Amazon #19
BT30 Machine Tool Handle, BT30 Aluminium Tightening Fixture Universal CNC Machine Tool Holder Integrated Vertical Horizontal Locking, Bench Vises
Asin: B0CKPL4XQP | Model: Hyuduogpgqtnmy5v | PartNumber: Hyuduogpgqtnmy5v
Good Protection: Designed To Provide Maximum Protection For The Tool Holder, The Tool Holder Has Exceptional Grip In Both Horizontal And Vertical Positions.
Durable Material: Aluminum Alloy Material, Durable, High Hardness, Light Weight, Possess Good Strength And Good Resistance.
Flexible And Efficient: Flexible And Versatile, Support Vertical Horizontal, Convenient And Fast, Saving Time And Effort.
Industrial Use: Bt30 Tightening Fixture Is Made With Investment Casting, Aluminum Seat Cover, Industrial Application.
Features
- LIGHT AND EASY TO INSTALL: The fastening fixture is light and compact, easy to install on the workbench or tool cart
- INDUSTRIAL USE: BT30 tightening fixture is made with investment casting, aluminum seat cover, industrial application
- GOOD PROTECTION: Designed to provide maximum protection for the tool holder, the tool holder has exceptional grip in both horizontal and vertical positions
- FLEXIBLE AND EFFICIENT: Flexible and versatile, support vertical horizontal, convenient and fast, saving time and effort
- DURABLE MATERIAL: Aluminum alloy material, durable, high hardness, light weight, possess good strength and good resistance
- See more on Amazon...
Brand: Hyuduo | Manufacturer: Hyuduo
See On Amazon #20
Akozon 2pcs BT30 CNC 45 Degree Pull Stud Retention Knob CNC Milling Tool Holder Square Nose
Asin: B0CJ9XN5CM | Model: Akozonhbs19a7uog | PartNumber: Akozonhbs19a7uog
Adopt Imported Steel, Heat Treated, Hrc50 Degree..
Material: Characteristic Carbon Steel.
Angle Degree: 45 Degrees.
Mas Specification Pull-Head Screws With Bt Standard Shank..
Features
- [Wide Range Of Applications]This CNC milling cutter has a wide range of applications and can be used for various tasks. For example, it is suitable for for Machining centers, CNC tool holders, connectors and fasteners
- MAS specification pull-head screws with BT standard shank.
- Adopt imported steel, heat treated, HRC50 degree.
- Angle Degree: 45 Degrees
- Material: Characteristic carbon steel
- See more on Amazon...
Brand: Akozon | Manufacturer: Akozon
See On Amazon
Looking For Something Else?
Search