6 Pcs Hot Dip Al-Zn Face-Mount Joist Hanger for 4x6 Post,2mm Thickness (14 Gauge) Heavy Duty Joist Hanger Structural-Connectors,Inner Width:89mm(3 inches)
Asin: B0BX6BFV89 | Model: MW104-T6 | PartNumber: MW104-T6
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.2Mm Thickness (14 Gauge) Heavy Duty Face Mount Joist Hanger..
Joist Hangers Are Designed To Provide Support Underneath The Joist, Rafter Or Beam To Provide A Strong A Connection..
Prepunched Hole Diameter (14 Pcs) ：Φ4mm ( Fastener Not Included )..
Material: Carbon Steel Dx51,Finish: Hot Dip Al-Zn..
Features
- U-Shaped Hanger Bracket Inner Size:89x125mm (3 x 5 inches) fit 4x6 Post.
- Material: Carbon steel DX51,Finish: hot dip Al-Zn.
- 2mm thickness (14 Gauge) heavy duty face mount joist hanger.
- Prepunched hole diameter (14 pcs) 4mm ( Fastener not Included ).
- Joist hangers are designed to provide support underneath the joist, rafter or beam to provide a strong a connection.
- See more on Amazon...
Brand: GBGS | Manufacturer: GBGS
Dimensions: 5.00 x 6.89 x 2.09 inches
See On Amazon Similar To 6 Pcs Hot Dip AlZn
#1
6 Pcs Tie Plate Bracket Flat Length 8 ", Carbon Steel Width 3" Metal Joint Thickness 2mm Flat Mending Repair Plate Corner Brace Heavy Duty Strap for Trusses Wood Timber , Light Gauge Steel Framing
Asin: B093GCKG76
Staggered Nail Pattern For A Secure Connection That Resists Splitting.
Heavy Duty Tie Plate Bracket For A Variety Of Connections And Splices Where Extra Strength Is Needed..
Anti-Corrosion, Wear Resistance, Anti-Rust. Smooth Surface And Edges Without Burrs.
Length: 8⅛" (208 Mm), Width: 3"(78 Mm), Thickness: 2Mm, 40 Nail Holes Diameter: Φ13/64"(5 Mm).
Features
- 6 Packs Flat Mending Repair Tie Plate Bracket. Carbon steel + Surface hot dip Al-Zn
- Length: 8 (208 mm), Width: 3(78 mm), Thickness: 2mm, 40 Nail Holes Diameter: 13/64(5 mm)
- Staggered nail pattern for a secure connection that resists splitting
- Anti-corrosion, wear resistance, anti-rust. Smooth surface and edges without burrs
- Heavy Duty Tie Plate Bracket for a variety of connections and splices where extra strength is needed.
- See more on Amazon...
Brand: GBGS | Manufacturer: GBGS
Dimensions: 0.08 x 8.19 x 3.07 inches | Weight: 3.00 Pounds
See On Amazon #2
10 PCS Heavy Duty Steel Z Brackets , Length 2" Double Angle Channel Profile Corner Brace for Wood Shelves Fixing Lumber Connector Pergola Brackets, Width 2 ", Thickness 1.5 mm
Asin: B09LQS6Y5M | Model: QG02-T10 | PartNumber: QG02-T10
Mounting Screws Size(6 Screw Holes): Φ4mm..
Anti-Corrosion, Wear Resistance, Anti-Rust. Smooth Surface And Edges Without Burrs.
Weight: 86 G-1 Piece, 866 G-10 Pieces.
Length: 2"(52 Mm), Height: 1¼"(32Mm),1⅞"(46 Mm), Width: 2⅜"(60Mm), Thickness: 1.5 Mm.
Features
- 10PCS Z Right Tie Plate Angle Bracket, Carbon Steel #51 + Surface Hot Dip Al-Zn Finished
- Length: 2(52 mm), Height: 1 (32mm),1 (46 mm), Width: 2 (60mm), Thickness: 1.5 mm
- Mounting Screws Size(6 Screw Holes): 4mm.
- Weight: 86 g-1 piece, 866 g-10 pieces
- Anti-corrosion, wear resistance, anti-rust. Smooth surface and edges without burrs
- See more on Amazon...
Brand: GBGS | Manufacturer: GBGS
Dimensions: 1.34 x 3.15 x 2.36 inches
See On Amazon #3
6 Pcs Flush Inside 45-Degree Plate Connector, 3 5 inches Steel Tie Plate Bracket , Mending Repair Plate Corner Brace ,Thickness 1.5 mm Heavy Duty for Roofing Trusses Wood Timber Connectors
Asin: B093GD6GXW
Length: 3½ (90 Mm), Width: 5"(125 Mm), Thickness:1.5 Mm, 28 Nail Holes Diameter: Φ13/64"(5 Mm).
Anti-Corrosion, Wear Resistance, Anti-Rust. Smooth Surface And Edges Without Burrs.
Staggered Nail Pattern For A Secure Connection That Resists Splitting.
Carbon Steel + Surface Hot Dip Al-Zn.
Features
- Connector plate for 45-degree inside joint
- Carbon steel + Surface hot dip Al-Zn
- Length: 3 (90 mm), Width: 5(125 mm), Thickness:1.5 mm, 28 Nail Holes Diameter: 13/64(5 mm)
- Staggered nail pattern for a secure connection that resists splitting
- Anti-corrosion, wear resistance, anti-rust. Smooth surface and edges without burrs
- See more on Amazon...
Brand: GBGS | Manufacturer: GBGS
Dimensions: 0.06 x 4.92 x 3.54 Inches | Weight: 224.00 Grams
See On Amazon #4
6 Pcs Hot Dip Al-Zn Hurricane Tie Stud for 2x4 Post,18 Gauge Light Girder Tiedown Thickness 1.2mm Fit 2x4 Truss to Rafter Connector
Asin: B0BZS3RWV9 | Model: MW112-T6 | PartNumber: MW112-T6
Inner Size: Wxh 38X89mm(1½ X 3½ Inches)Fit For 2X4,2X6 Post;Thickness: 18 Gauge(1.2Mm )..
Hot Dip Al-Zn Hurricane Tie Designed To Provide A Connection Between Trusses/Rafters And The Top Plate Of The Wall To Resist High-Wind/Seismic Forces Joist Hanger..
Multi-Hole Deign (2 Kinds):Φ4mm(37 Pcs);Φ8mm(2 Pcs)..
Carbon Steel Q235bmaterial, Surface Hot Dip Al-Zn, Good Impact Resistance, Wear Resistance And Corrosion Resistance..
Features
- 18 Gauge Hurricane Tie suitable for connecting 2x post deck joists on top of a perpendicular beam.
- Carbon steel Q235Bmaterial, surface hot dip Al-Zn, good impact resistance, wear resistance and corrosion resistance.
- Inner Size: WxH 38x89mm(1 x 3 inches)fit for 2x4,2x6 post;Thickness: 18 Gauge(1.2mm ).
- Multi-hole deign (2 kinds): 4mm(37 pcs); 8mm(2 pcs).
- Hot dip Al-Zn hurricane tie designed to provide a connection between trusses/rafters and the top plate of the wall to resist high-wind/seismic forces Joist hanger.
- See more on Amazon...
Brand: GBGS | Manufacturer: GBGS
Dimensions: 0.67 x 11.61 x 5.00 inches
See On Amazon #5
20 Pack Framing Angle Anchor Right Side, 4 x 2 x2 in. Steel Triple Grips, 18 Gauge Hurricane Tie 90 Degree L Bracket for Fixing Timber Joints, Roof Truss/Stud/Rafter to Wall Plate Connector
Asin: B0CTBLQF11 | Model: Z-QG16-T20-US-A | PartNumber: Z-QG16-T20-US-A
4Mm Prepunched Hole, Fit For #6 Nail/Screw..
Packing List: 20 Pcs Right Framing Angle Anchor.
90-Degree Right Joints, Available Used In Right Hand And Left Hand, Apply To Fix Many Light Steel Or Timer Joints, Such As Roof Truss To Wall Plate, Stud To Wall Plate, Rafter Or Ceiling Joist To Wall Plate, Corner Studs To Wall Plate, Joist To Supporting Beam, Purlin To Truss, Hanger To Ceiling Joist.
Size: 2X2x4 In. (50 X 50 X 100Mm), Thickness: 18 Gauge (1.2Mm)..
Features
- Carbon steel Q235B, hot dip Al-Zn finish.
- Size: 2x2x4 in. (50 x 50 x 100mm), Thickness: 18 Gauge (1.2mm).
- 4mm prepunched hole, fit for #6 nail/screw.
- 90-degree right joints, available used in right hand and left hand, apply to fix many light steel or timer joints, such as roof truss to wall plate, stud to wall plate, rafter or ceiling joist to wall plate, corner studs to wall plate, joist to supporting beam, purlin to truss, hanger to ceiling joist
- Packing list: 20 pcs right Framing Angle Anchor
- See more on Amazon...
Brand: MOUNTAIN_ARK | Manufacturer: MOUNTAIN_ARK
Dimensions: 1.97 x 3.94 x 1.97 inches
See On Amazon #6
6 Pcs 45 Degree Steel Rigid Tie Connector,2mm Thickness(14 Gauge) Hot Dip Al-Zn,Knee Plate Joint Metal Fixing Brace Leg Connector for Wood Roof Trusses Framing
Asin: B0BX63QG3N | Model: MW103-T6 | PartNumber: MW103-T6
Prepunched Hole Diameter (16 Pcs) ：Φ4mm ( Fastener Not Included )..
Widly Application, As 45 Degree Angle Flat Bracket For Frame And Trusses, Use In 45 Degree Structure Joint, Such As 45 Degree Steel Bracket, 45 Degree Knee Bracket, 45 Degree Support Plate..
Product Size:189X175x28mm;Thickness:2Mm (14 Gauge)..
Features
- Material: Carbon steel DX51,Finish: hot dip Al-Zn.
- Product Size:189x175x28mm;Thickness:2mm (14 Gauge).
- Prepunched hole diameter (16 pcs) 4mm ( Fastener not Included ).
- Widly application, as 45 degree angle flat bracket for frame and trusses, use in 45 degree structure joint, such as 45 degree steel bracket, 45 degree knee bracket, 45 degree support plate.
- See more on Amazon...
Brand: GBGS | Manufacturer: GBGS
Dimensions: 1.10 x 7.44 x 6.89 inches
See On Amazon #7
6 Pcs 45 Degree Rigid Face-Mount Tie Connector, Hot Dip Al-Zn Light Post to Beams Connector Rooftop Wood or Light Steel Connection, 14 Gauge (3 Right + 3 Left)
Asin: B0CJQXDHB4 | Model: QG14-T3 | PartNumber: QG14-T3
Size: 260X190x40mm , Thickness: 14 Gauge (2 Mm).
Prepunched Hole Size: 4.2 Mm, Fasteners Are Not Included..
Made Of Carbon Steel Dx51, Hot Dip Al-Zn Finish..
Features
- 6 Pcs 45 Degree Rigid Face-Mount Tie Connector (3 left + 3 right).
- Made of carbon steel DX51, hot dip Al-Zn finish.
- Size: 260x190x40mm , Thickness: 14 Gauge (2 mm)
- Prepunched hole size: 4.2 mm, fasteners are not Included.
- See more on Amazon...
Brand: OTTFF | Manufacturer: OTTFF
Dimensions: 1.57 x 10.24 x 7.48 inches
See On Amazon #8
20 Pack Framing Angle Anchor Left, 4 x 2 x2 in. Steel Triple Grips, 18 Gauge Hurricane Tie 90 Degree L Bracket for Fixing Light Steel / Timber Joints, Roof Truss/Stud/Rafter to Wall Plate Connector
Asin: B0CTC6477R | Model: QG17-T20 | PartNumber: QG17-T20
4Mm Prepunched Hole, Fit For #6 Nail/Screw..
Packing List: 20 Pcs Left Framing Angle Anchor.
90-Degree Left Joints, Available Used In Right Hand And Left Hand, Apply To Fix Many Light Steel Or Timer Joints, Such As Roof Truss To Wall Plate, Stud To Wall Plate, Rafter Or Ceiling Joist To Wall Plate, Corner Studs To Wall Plate, Joist To Supporting Beam, Purlin To Truss, Hanger To Ceiling Joist.
Size: 2X2x4 In. (50 X 50 X 100Mm), Thickness: 18 Gauge (1.2Mm)..
Features
- Carbon steel Q235B, hot dip Al-Zn finish.
- Size: 2x2x4 in. (50 x 50 x 100mm), Thickness: 18 Gauge (1.2mm).
- 4mm prepunched hole, fit for #6 nail/screw.
- 90-degree left joints, available used in right hand and left hand, apply to fix many light steel or timer joints, such as roof truss to wall plate, stud to wall plate, rafter or ceiling joist to wall plate, corner studs to wall plate, joist to supporting beam, purlin to truss, hanger to ceiling joist
- Packing list: 20 pcs Left Framing Angle Anchor
- See more on Amazon...
Brand: MOUNTAIN_ARK | Manufacturer: MOUNTAIN_ARK
Dimensions: 3.94 x 1.97 x 1.97 inches
See On Amazon
Looking For Something Else?
Search