Sovol SV06 Plus 3D Printer with 300 High Temp 250mm/s High Speed All Metal Hotend, Planetary Dual Gear Direct Drive Touch Screen Auto Leveling 32-bit Silent Board, Printing Size 11.8x11.8x13.4 inch
Asin: B0BXKK765N | Model: SV06 Plus | PartNumber: SV06 Plus
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【300℃ High Temp Printing】All Metal Hotend Setup Makes It Possible To Print Up To 300℃. No Need To Deal With Ptfe Replacement Anymore, And Even No Need To Flash The Firmware, You Can Print With Different Materials Better And More Easily. ( Enclosure Is Still Needed If You Want To Print Over 260℃.).
【Pei Build Plate】The Flexible Pei-Coated Build Plate With Mesh Surface Design Makes The Prints Can Be Removed Easily Without Any Tools..
【Self-Developed 32-Bit Silent Board】Tmc2209 Driver Makes Sv06 Plus Work Stably And Quietly. Uart Mode Is Available, So That More Modifications Can Be Done Easily For Advanced Users..
【Upgraded 4.3 Inch Touch Screen】Day & Night Modes Can Be Switched Casually. The Unique Sovol Ui And Sensitive Response Bring You Better Experience Than Knob Display..
【25-Point Auto Leveling】With Inductive Sensor, Sv06 Plus Detects The Metal Print Bed Through 25 Points Automatically And Compensate The Unevenness Of The Heated Bed. The Fast, Smart, Precise Detection And Compensation Help You To Get The Bed Leveled Perfectly And Get An Fantastic First Layer. Note: Set The Height Of Initial Layer To 0.3Mm When You Slice That Would Help You To Printer Better Initial Layer And Make The Filament Stick To The Plate Better..
【Planetary Dual Gear Direct Drive】Sovol Self-Developed All Metal Direct Drive Extruder With Planetary Dual Gear Set, Provide Sv06 Plus With Higher Drive Ratio And A Lighter Motor, Helps To Achieve More Accurate Extrusion. Add Large External Knob For Easy Feeding..
【Customer Service】Sovol 3D Printers Come With One-Year Warranty And Lifetime Technical Support. Any Question About Sovol Sv06 Plus 3D Printer, Just Click "Ask A Question" Through Our Storefront's Page, Report An Issue Through The "Your Orders" Page. We Will Fast Respond Within 24 Hours And Try Our Best To Resolve Your Every Issue..
【250Mm/S High Speed High Flow All Metal Hotend】All Metal Hotend With Larger Melt Zone Enables You To Print Faster. High Flow Up To 20Mm³/S To Achieve 250Mm/S Printing Speed That Greatly Reduces The Probability Of Clogging (180Mm/S Recommended For Better Printing Quality). Working With Sv06 Plus Klipper Screen (Does Not Come With The Printer, Need To Purchase Additionally), Sv06 Plus Can Reach A Fast And Upgraded Printing Speed Of 350Mm/S..
Features
- Classic I3 Structure with Larger Volume Different from most 3D printers run by wheels in the market, SV06 Plus has a classic I3 structure which avoids wear and tear of wheels and multiple replacements. 300x300x340mm printing size makes SV06 Plus unique among I3 structure 3d printers. Modular design allows you to assemble SV06 plus within 5 steps easily, more applicable for household use.
- 250mm/s High Speed High Flow All Metal Hotend All Metal Hotend with larger melt zone enables you to print faster. High Flow up to 20mm /s to achieve 250mm/s printing speed that greatly reduces the probability of clogging (180mm/s recommended for better printing quality). Working with SV06 Plus Klipper screen (does not come with the printer, need to purchase additionally), SV06 Plus can reach a fast and upgraded printing speed of 350mm/s.
- 300 High Temp Printing All metal Hotend Setup makes it possible to print up to 300 . No need to deal with PTFE replacement anymore, and even no need to flash the firmware, you can print with different materials better and more easily. ( Enclosure is still needed if you want to print over 260 .)
- Planetary Dual Gear Direct Drive Sovol self-developed All Metal Direct Drive Extruder with planetary dual gear set, provide SV06 plus with higher drive ratio and a lighter motor, helps to achieve more accurate extrusion. Add large external knob for easy feeding.
- Upgraded 4.3 inch Touch Screen Day & Night Modes can be switched casually. The unique Sovol UI and sensitive response bring you better experience than knob display.
- 25-point Auto Leveling With inductive sensor, SV06 Plus detects the metal print bed through 25 points automatically and compensate the unevenness of the heated bed. The fast, smart, precise detection and compensation help you to get the bed leveled perfectly and get an fantastic first layer. Note: Set the height of initial layer to 0.3mm when you slice that would help you to printer better initial layer and make the filament stick to the plate better.
- PEI Build Plate The flexible PEI-coated build plate with mesh surface design makes the prints can be removed easily without any tools.
- Self-developed 32-Bit Silent Board TMC2209 driver makes SV06 Plus work stably and quietly. UART mode is available, so that more modifications can be done easily for advanced users.
- Customer Service Sovol 3d printers come with one-year warranty and lifetime technical support. Any question about Sovol SV06 Plus 3d printer, just click Ask a question through our storefront's page, report an issue through the Your Orders page. We will fast respond within 24 hours and try our best to resolve your every issue.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
Dimensions: 13.40 x 11.80 x 11.80 inches | Weight: 30.86 pounds
See On Amazon Similar To Sovol SV06 Plus 3D Printer
#1
Sovol SV06 3D Printer Open Source with All Metal Hotend Planetary Dual Gear Direct Drive Extruder 25-Point Auto Leveling PEI Build Plate 32 Bit Silent Board Printing Size 8.66x8.66x9.84 inch
Asin: B0BJV3WB2J | Model: SV06 | PartNumber: SV06
【300℃ High Temp Printing】All Metal Hotend Setup Makes It Possible To Print Up To 300℃. No Need To Deal With Ptfe Replacement Anymore, And Even No Need To Flash The Firmware, You Can Print With Different Materials Better And More Easily. ( Enclosure Is Still Needed If You Want To Print Over 260℃.).
【Customer Service】Sovol 3D Printers Come With One-Year Warranty And Lifetime Technical Support. Any Question On Sovol Sv06 3D Printer, Just Click "Ask A Question" Through Our Storefront's Page, Report An Issue Through The "Your Orders" Page. We Will Fast Respond Within 24 Hours And Try Our Best To Resolve Your Every Issue..
【Pei Build Plate】The Flexible Pei-Coated Build Plate With Mesh Surface Design Makes The Prints Can Be Removed Easily Without Any Tools. 220*220*250Mm Print Size, Enough For Daily Use And Household Use..
【Self-Developed 32-Bit Silent Board】With Tmc2209 Drivers, Makes The Printer Works Stably And Quietly. Uart Mode Is Available, So That More Modifications Can Be Done Easily For Advanced Users..
【25-Point Auto Leveling】With Inductive Sensor, Detect The Metal Print Bed Through 25 Points Automatically And Compensate The Unevenness Of The Heated Bed. The Fast, Smart, Precise Detection And Compensation Help You To Get The Bed Leveled Perfectly And Get An Fantastic First Layer. Note: Set The Height Of Initial Layer To 0.3Mm When You Slice That Would Help You To Printer Better Initial Layer And Make The Filament Stick To The Plate Better..
【Planetary Dual Gear Direct Drive】Sovol Self-Developed All Metal Direct Drive Extruder With Planetary Dual Gear Set, Provide Sv06 With Higher Drive Ratio And A Lighter Motor, Helps To Achieve More Accurate Extrusion. Add Large External Knob For Easy Feeding..
Features
- Classic I3 Structure Combines with Sovol New Design Different from most 3D printers run by wheels in the market, SV06 has a classic I3 structure which avoids wear and tear of wheels and multiple replacements and it is widely applied into industry. We did something new to make it more applicable for household use. Modular design allows you to assemble SV06 within 5 steps easily. Working with SV06 Klipper screen (does not come with the printer, need to purchase additionally), SV06 can reach a fast and upgraded printing speed of 250mm/s.
- Planetary Dual Gear Direct Drive Sovol self-developed All Metal Direct Drive Extruder with planetary dual gear set, provide SV06 with higher drive ratio and a lighter motor, helps to achieve more accurate extrusion. Add large external knob for easy feeding.
- 300 High Temp Printing All metal Hotend Setup makes it possible to print up to 300 . No need to deal with PTFE replacement anymore, and even no need to flash the firmware, you can print with different materials better and more easily. ( Enclosure is still needed if you want to print over 260 .)
- 25-point Auto Leveling With inductive sensor, detect the metal print bed through 25 points automatically and compensate the unevenness of the heated bed. The fast, smart, precise detection and compensation help you to get the bed leveled perfectly and get an fantastic first layer. Note: Set the height of initial layer to 0.3mm when you slice that would help you to printer better initial layer and make the filament stick to the plate better.
- PEI Build Plate The flexible PEI-coated build plate with mesh surface design makes the prints can be removed easily without any tools. 220*220*250mm print size, enough for daily use and household use.
- Self-developed 32-Bit Silent Board With TMC2209 drivers, makes the printer works stably and quietly. UART mode is available, so that more modifications can be done easily for advanced users.
- Customer Service Sovol 3d printers come with one-year warranty and lifetime technical support. Any question on Sovol SV06 3d printer, just click Ask a question through our storefront's page, report an issue through the Your Orders page. We will fast respond within 24 hours and try our best to resolve your every issue.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
Dimensions: 14.96 x 24.02 x 19.29 inches
See On Amazon #2
Sovol SV06 Plus/SV07/SV07 Plus Hardened Steel High Flow Nozzles 0.4mm*2pcs/0.6mm*2pcs/0.8mm*1pc/1mm*1pc 6pcs in Total
Asin: B0CCT84VR4
This Kit Is Only Compatible With Sovol Sv06 Plus, Sv07 And Sv07 Plus..
Filament Diameter: 1.75 Mm Size: 13Mm*7Mm.
Package Contains 0.4Mm*2Pcs/0.6Mm*2Pcs/0.8Mm*1Pc/1Mm*1Pc, 6Pcs In Total..
Tungsten Nozzles Have Good Performance And Are Compatible With Most Filaments That Require High Temperatures..
Features
- The tungsten nozzles are made of high-quality hardened tool steel, which has the advantages of good wear resistance, heat resistance, corrosion resistance, and long service life.
- Tungsten nozzles have good performance and are compatible with most filaments that require high temperatures.
- This kit is Only compatible with Sovol SV06 Plus, SV07 and SV07 Plus.
- Package contains 0.4mm*2pcs/0.6mm*2pcs/0.8mm*1pc/1mm*1pc, 6pcs in Total.
- Filament diameter: 1.75 mm Size: 13mm*7mm
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
See On Amazon #3
Sovol SV06 Plus Hotend Kit Coming with Brass Nozzle Heating Block Thermistor Heating Wire, Metal Throat and Silicone Cover for SV06 Plus SV07 SV07 Plus
Asin: B0C2YX4V7R
More Sv06 Plus Accessories Will Be Listed For Sale On Amazon. If You Want To Order Any Accessories We Have Not Sell On Amazon Temporarily Please Let Us Know Through Amazon Message. All Accessories Of Sv06 Plus Can Be Ordered From Us..
This Hotend Kit Also Fits For Sovol Sv07/Sv07 Plus..
This Sv06 Plus Hotend Kit Comes With The Heatblock, Brass Nozzle. Thermistor, Heating Tube, Metal Heatbreak And Silicone Cover..
Features
- 100% Sovol Original.
- This SV06 plus Hotend kit comes with the heatblock, brass nozzle. thermistor, heating tube, metal heatbreak and silicone cover.
- More SV06 Plus accessories will be listed for sale on Amazon. If you want to order any accessories we have not sell on Amazon temporarily please let us know through Amazon message. All accessories of SV06 Plus can be ordered from us.
- This hotend kit also fits for Sovol SV07/SV07 Plus.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
See On Amazon #4
Sovol Silk PLA Filament Tri Color Co-Extrusion 1.75mm, 3D Printer Filament 1kg/ 2.2lbs, Shiny Silk Copper Purple Green 3 in 1 Coextrusion PLA Material +/-0.03mm
Asin: B0CC1DDF5G
【Easy To Print】The Diameter Tolerance Of This 1.75 Pla Filament Is +/- 0.03Mm. More Stable Diameter Tolerance Of 3D Printer Filament Would Bring You Smoother 3D Printing Experience. Universal Compatibility With Most Fdm 3D Printers And 3D Pens..
【Life-Time Guarantee】 Sovol Offers Refund If The Silk Pla Is Not Performing As Expected. Any Questions We Will Be Here To Help!.
【Eco Packaging】Instead Of Plastic Spools, We Use Paper Spool And Paper Box To Package Pla Filament. The Pla Filament Is Vacuum Packed With High Quality Desiccant To Keep Dry..
【Imported Pla Raw Material】The Raw Material Comes From The Us, And It Has Been Developed And Modulated To Show A Charming Gloss On The Pla. No Jam, No Bubbles, No Tangle, And No Layer Line. With Perfect First Layer Adhesion To Reduce Warpage, Shrinkage, Curl And Print Failure..
Features
- Tri-Color Co-extruded Filament Different from normal color change rainbow PLA filament, every inch of Sovol magic 3d filament is made of three colors-Copper, Purple, and Green. Therefore, you will easily get all 3 colors, even for very small prints. You can change the visible color by rotating the color-blending filament to different orientations. Multicolor silk filaments can output with incredible pearlescent and gorgeous shiny surface.
- Imported PLA Raw Material The raw material comes from the US, and it has been developed and modulated to show a charming gloss on the PLA. No jam, no bubbles, no tangle, and no layer line. With perfect first layer adhesion to reduce warpage, shrinkage, curl and print failure.
- Easy to Print The diameter tolerance of this 1.75 PLA filament is +/- 0.03mm. More stable diameter tolerance of 3D printer filament would bring you smoother 3D printing experience. Universal compatibility with most FDM 3D printers and 3D Pens.
- ECO Packaging Instead of plastic spools, we use paper spool and paper box to package PLA filament. The PLA filament is vacuum packed with high quality desiccant to keep dry.
- Life-time Guarantee Sovol offers refund if the silk PLA is not performing as expected. Any questions we will be here to help!
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
Weight: 2.20 pounds
Warranty: 1 year manufacturer
See On Amazon #5
Sovol 5" IPS Touch Screen with Klipper Firmware Pre-Installed for Sovol SV06 Plus 3D Printer, Assist SV06 Plus Speed up to 350mm/s
Asin: B0CLCPM8PZ | Model: SV06 Plus | PartNumber: SV06 Plus
Clip Design Makes Installation Easier..
Any Questions About The Product Please Feel Free To Contact With Us..
Only Fits For Sovol Sv06 Plus. We Do Not Recommend You To Install It For Sovol Sv06. You Can Order The Specific Klipper Screen For Sovol Sv06..
5 Inch Ips Capatitive Touch Screen With A Resolution Of 480X800 Provides High Definition And Rich Colors. The Klipper Touchscreen Has Great Function Options Like Height Map, Input Shaper And Slicing Prints Preview. It Is Customizable To Suit Your Other Printing Needs. Multiple Languages Are Also Supported On This Touch Screen..
Features
- Pre-installed Klipper firmware makes SV06 Plus print at 350mm/s, 2 times as before. Print quality can be kept while speeding up.
- 5 inch IPS capatitive touch screen with a resolution of 480x800 provides high definition and rich colors. The Klipper touchscreen has great function options like height map, input shaper and slicing prints preview. It is customizable to suit your other printing needs. Multiple languages are also supported on this touch screen.
- Clip Design makes installation easier.
- Only fits for Sovol SV06 Plus. We do not recommend you to install it for Sovol SV06. You can order the specific Klipper screen for Sovol SV06.
- Any questions about the product please feel free to contact with us.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
Dimensions: 3.35 x 11.42 x 7.48 inches | Weight: 0.52 pounds
Warranty: 1 Year Manufacturer
See On Amazon #6
Sovol SV06 Hotend Kit Coming with Brass Nozzle Heating Block Thermistor Heating Wire, Metal Throat and Silicone Cover
Asin: B0BQC82P3D | Model: SV06 Hotend Kit | PartNumber: SV06 Hotend Kit
We Also Sell The Extruder, Silent Board And Pei Build Plate Of Sv06 On Amazon Now. If You Have Spare Needs You Can Order Them..
More Sv06 Accessories Will Be Listed For Sale On Amazon. If You Want To Order Any Accessories We Have Not Sell On Amazon Temporarily Please Let Us Know Through Amazon Message. All Accessories Of Sv06 Can Be Ordered From Us..
This Sv06 Hotend Kit Comes With The Heatblock, Brass Nozzle. Thermistor, Heating Tube, Metal Heatbreak And Silicone Cover..
Features
- 100% Sovol Original.
- This SV06 Hotend kit comes with the heatblock, brass nozzle. thermistor, heating tube, metal heatbreak and silicone cover.
- We also sell the extruder, silent board and PEI build plate of SV06 on Amazon now. If you have spare needs you can order them.
- More SV06 accessories will be listed for sale on Amazon. If you want to order any accessories we have not sell on Amazon temporarily please let us know through Amazon message. All accessories of SV06 can be ordered from us.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
See On Amazon #7
Sovol SV06 Plus SV04 Flexible Steel Platform with PEI Surface & Magnetic Bottom Sheet with Adhesive for Creality Ender 3 Max Ender 3 Max NEO CR-10 V2 CR-10 V3 CR-10S PRO V2 CR-X 310 x 320mm
Asin: B0C9917Z5L
Sovol Pei Sheet Is Very Easy To Use, Simply Stick The Magnetic Bottom Sheet Onto Your Heated Bed, Then Place The Steel Platform With Pei Surface On The Top. The Maximum Temperature For Printing Is 130℃ On The Bed..
Prints Come Off The Surface Easily When The Temperature Of The Heated Bed Reaches Room Temperature. If The Print Is Hard To Remove, Gently Flex The Plate And Removing Would Be Easier.Any Issues With The Product Please Contact Us At Any Time. We Will Provide Solutions For You..
Excellent Adhesion Can Be Achieved When The Temperature Of The Heated Bed Is About 60℃, You Can Print Directly On Sovol Pei Sheet Without Using Any Glue Or Other Tools To Help The Model To Stick Onto The Sheet. You Do Not Need To Worry About The Prints Curling With A 60℃ Bed Temperature. It Also Can Print Petg Very Well, But The Temperature Of The Hot Bed Needs To Be About 80-85℃..
The Size Of Sovol Pei Platform Is 310*320Mm, It Is Applicable With Sovol Sv06 Plus, Sv04, Creality Ender-3 Max, Ender-3 Max Neo, Cr-10 V2, Cr-10S Pro, Cr-10S Pro V2 And Cr-X..
Features
- Sovol PEI sheet is combined with 2 parts, a flexible steel platform coated with PEI surface and a magnetic bottom sheet with adhesive on the back.
- The size of Sovol PEI Platform is 310*320mm, it is applicable with Sovol SV06 Plus, SV04, Creality Ender-3 Max, Ender-3 Max NEO, CR-10 V2, CR-10S Pro, CR-10S Pro V2 and CR-X.
- Sovol PEI sheet is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130 on the bed.
- Excellent adhesion can be achieved when the temperature of the heated bed is about 60 , you can print directly on Sovol PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60 bed temperature. It also can print PETG very well, but the temperature of the hot bed needs to be about 80-85 .
- Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is hard to remove, gently flex the plate and removing would be easier.Any issues with the product please contact us at any time. We will provide solutions for you.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
Weight: 2.31 pounds
See On Amazon #8
Sovol SV06 All Metal Planetary Direct Drive Extruder Coming with Stepper Motor Without Fans and Auto Leveling Fits for SV06 SV06 Plus
Asin: B0BQC5FYKJ | Model: SV06 Extruder Kit | PartNumber: SV06 Extruder Kit
We Also Sell The Hotend And Pei Build Plate Of Sv06 On Amazon Now. If You Have Spare Needs You Can Order Them..
More Sv06 Accessories Will Be Listed For Sale On Amazon. If You Want To Order Any Accessories We Have Not Sell On Amazon Temporarily Please Let Us Know Through Amazon Message. All Accessories Of Sv06 Can Be Ordered From Us..
This Half Kit Of Extruder Comes Without Hotend, Fans And Auto Leveling..
Features
- 100% Sovol original!
- This half kit of extruder comes without hotend, fans and auto leveling.
- We also sell the hotend and PEI build plate of SV06 on Amazon now. If you have spare needs you can order them.
- More SV06 accessories will be listed for sale on Amazon. If you want to order any accessories we have not sell on Amazon temporarily please let us know through Amazon message. All accessories of SV06 can be ordered from us.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
See On Amazon #9
Sovol SV06 Plus 3D Printer Coming with 1 Spool 1kg Blue PLA Filament, 300 High Temp 150mm/s High Speed All Metal Hotend, Dual Gear Direct Drive Touch Screen Auto Leveling 11.8x11.8x13.4 inch
Asin: B0CCRYTL57
【300℃ High Temp Printing】All Metal Hotend Setup Makes It Possible To Print Up To 300℃. No Need To Deal With Ptfe Replacement Anymore, And Even No Need To Flash The Firmware, You Can Print With Different Materials Better And More Easily. ( Enclosure Is Still Needed If You Want To Print Over 260℃.).
【Pei Build Plate】The Flexible Pei-Coated Build Plate With Mesh Surface Design Makes The Prints Can Be Removed Easily Without Any Tools..
【Self-Developed 32-Bit Silent Board】Tmc2209 Driver Makes Sv06 Plus Work Stably And Quietly. Uart Mode Is Available, So That More Modifications Can Be Done Easily For Advanced Users..
【Upgraded 4.3 Inch Touch Screen】Day & Night Modes Can Be Switched Casually. The Unique Sovol Ui And Sensitive Response Bring You Better Experience Than Knob Display..
【25-Point Auto Leveling】With Inductive Sensor, Sv06 Plus Detects The Metal Print Bed Through 25 Points Automatically And Compensate The Unevenness Of The Heated Bed. The Fast, Smart, Precise Detection And Compensation Help You To Get The Bed Leveled Perfectly And Get An Fantastic First Layer. Note: Set The Height Of Initial Layer To 0.3Mm When You Slice That Would Help You To Printer Better Initial Layer And Make The Filament Stick To The Plate Better..
【Planetary Dual Gear Direct Drive】Sovol Self-Developed All Metal Direct Drive Extruder With Planetary Dual Gear Set, Provide Sv06 Plus With Higher Drive Ratio And A Lighter Motor, Helps To Achieve More Accurate Extrusion. Add Large External Knob For Easy Feeding..
【Customer Service】Sovol 3D Printers Come With One-Year Warranty And Lifetime Technical Support. Any Question About Sovol Sv06 Plus 3D Printer, Just Click "Ask A Question" Through Our Storefront's Page, Report An Issue Through The "Your Orders" Page. We Will Fast Respond Within 24 Hours And Try Our Best To Resolve Your Every Issue..
【150Mm/S High Speed High Flow All Metal Hotend】All Metal Hotend With Larger Melt Zone Enables You To Print Faster. High Flow Up To 20Mm³/S To Achieve 150Mm/S Printing Speed That Greatly Reduces The Probability Of Clogging..
Features
- Classic I3 Structure with Larger Volume Different from most 3D printers run by wheels in the market, SV06 Plus has a classic I3 structure which avoids wear and tear of wheels and multiple replacements. 300x300x340mm printing size makes SV06 Plus unique among I3 structure 3d printers. Modular design allows you to assemble SV06 plus within 5 steps easily, more applicable for household use.
- 150mm/s High Speed High Flow All Metal Hotend All Metal Hotend with larger melt zone enables you to print faster. High Flow up to 20mm /s to achieve 150mm/s printing speed that greatly reduces the probability of clogging.
- 300 High Temp Printing All metal Hotend Setup makes it possible to print up to 300 . No need to deal with PTFE replacement anymore, and even no need to flash the firmware, you can print with different materials better and more easily. ( Enclosure is still needed if you want to print over 260 .)
- Planetary Dual Gear Direct Drive Sovol self-developed All Metal Direct Drive Extruder with planetary dual gear set, provide SV06 plus with higher drive ratio and a lighter motor, helps to achieve more accurate extrusion. Add large external knob for easy feeding.
- Upgraded 4.3 inch Touch Screen Day & Night Modes can be switched casually. The unique Sovol UI and sensitive response bring you better experience than knob display.
- 25-point Auto Leveling With inductive sensor, SV06 Plus detects the metal print bed through 25 points automatically and compensate the unevenness of the heated bed. The fast, smart, precise detection and compensation help you to get the bed leveled perfectly and get an fantastic first layer. Note: Set the height of initial layer to 0.3mm when you slice that would help you to printer better initial layer and make the filament stick to the plate better.
- PEI Build Plate The flexible PEI-coated build plate with mesh surface design makes the prints can be removed easily without any tools.
- Self-developed 32-Bit Silent Board TMC2209 driver makes SV06 Plus work stably and quietly. UART mode is available, so that more modifications can be done easily for advanced users.
- Customer Service Sovol 3d printers come with one-year warranty and lifetime technical support. Any question about Sovol SV06 Plus 3d printer, just click Ask a question through our storefront's page, report an issue through the Your Orders page. We will fast respond within 24 hours and try our best to resolve your every issue.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
Dimensions: 10.00 x 23.00 x 25.00 inches | Weight: 2.20 Pounds
See On Amazon #10
Sovol 32-bit Silent Motherboard, Silent Mainboard with TMC2209 Driver for Creality Ender 3 Ender 3 Pro Sovol SV06 SV06 Plus 3D Printer
Asin: B0BTRZN3H7 | Model: 32-bit Silent Board | PartNumber: 32-bit Silent Board
All-Round Heat Dissipation Design, Each Tmc2209 Chip Have Heat Sinks, Let The Cooling System Easily Cope With More Situations..
If You Have Any Other Questions, Please Let Us Know. We Will Reply And Provide Professional Technical Support Within 24 Hours..
Perfect Fit For Creality Ender 3, Ender 3 Pro 3D Printer. The Firmware Presinsalled For Ender 3, Plug And Play. If Your Printer Is Other Models Except Ender 3 Please Flash Firmware At First. P.S. Please Come To Creality Official Website To Download Firmware. Select The Firmware With The 'Gd' Character. Do Not Flash Other Versions Such As The Firmware With 'Stm' Character..
This Board Is Also Compatible With Sovol Sv06 And Sv06 Plus, Only Need To Flash Firmware At First..
Support Auto Leveling, Filament Sensor And Resume Printing After A Power Failure..
High Quality Mos Tube, High Imput Impedance, Low Noise Below 50 Decibels, Good Thermal Stability..
Features
- Sovol new self-developed upgraded motherboard is equiped with 32-bit MCU and 24V power input, which makes the caculation speed faster, operation control system more sensitive, printing accuracy higher and improve stability.
- High quality MOS tube, high imput impedance, low noise below 50 decibels, good thermal stability.
- All-round heat dissipation design, each TMC2209 chip have heat sinks, let the cooling system easily cope with more situations.
- Support auto leveling, filament sensor and resume printing after a power failure.
- Perfect fit for Creality Ender 3, Ender 3 Pro 3D Printer. The firmware presinsalled for Ender 3, Plug and Play. If your printer is other models except Ender 3 please flash firmware at first. P.S. Please come to Creality official website to download firmware. Select the firmware with the 'GD' character. Do not flash other versions such as the firmware with 'STM' character.
- This board is also compatible with Sovol SV06 and SV06 Plus, only need to flash firmware at first.
- If you have any other questions, please let us know. We will reply and provide professional technical support within 24 hours.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
Dimensions: 1.85 x 6.30 x 4.53 inches
See On Amazon #11
Sovol SV06 Filament Sensor & Filament Bracket Roller
Asin: B0CFV7CTLN
Scrollable Filament Bracket Reduces The Pulling Friction Of The Filaments That Makes Printing Effect Of Tpu Better..
You Can Download The Firmware From Sovol Official Website. Any Questions About The Product Please Feel Free To Contact With Us..
This Kits Including 1 Filament Sensor And 1 Filament Bracket Roller And Their Installation Parts..
The Filament Run-Out Sensor Would Pause The Printing Automatically If You Run Out The Filament Or In Case Of The Broken Filament..
Features
- Only Fits for Sovol SV06.
- The filament run-out sensor would pause the printing automatically if you run out the filament or in case of the broken filament.
- Scrollable filament bracket reduces the pulling friction of the filaments that makes printing effect of TPU better.
- This kits including 1 filament sensor and 1 filament bracket roller and their installation parts.
- You can download the firmware from Sovol official website. Any questions about the product please feel free to contact with us.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
See On Amazon #12
Sovol SV07 Plus 3D Printer with Klipper Firmware, Max Print Speed 500mm/s, 300 High Temp, 600W Power Supply 420W Hotbed 5" Touch Screen Planetary Direct Drive Auto Leveling 11.8x11.8x13.8in
Asin: B0CC8XTCBH | Model: SV07 Plus | PartNumber: SV07 Plus
【Larger Print Volume & Heating Faster】Equipped With 600W Power Supply, Sv07 Plus Brings Super Excellent And Stable Heating Performance. Upgraded 420W Heated Bed Can Be Heated To 60℃ In 90 Seconds, Which Is 30 Seconds Faster At Least Than Most Printers In The Market ( All Sizes ). If You Own A Sv07 Plus, Not Only You Own A 300X300x350mm Larger Print Volume Printer, But Also You Get Super Faster Heating Speed And Printing Speed..
【25-Point Bed Leveling】Sv07 Plus Features 25-Point Auto Leveling With An Inductive Sensor To Detect And Compensate For Unevenness In The Heated Bed. This Precise And Smart Technology Makes It Possible To Get A Fantastic First Layer. Note: Set Initial Layer Height To 0.3Mm When Slicing Will Help You Get Optimal Results. If You Have Any Adhension Issue We Recommend You To Wipe The Pei Surface With Alcohol Before The Next Printing..
【Planetary Dual Gear Direct Drive Extruder】 With Sovol's Self-Developed Direct Drive Extruder That Comes With Planetary Dual Gear Set, Sv07 Plus Offers A Higher Drive Ratio And Lighter Motor For Precise Extrusion. We Also Have Added A Large External Knob To Make Feeding Easier, So You Can Focus On Your Printing Project With Minimal Interruptions..
【High Flow Hotend Achieves 300℃ Printing】All-Metal Hotend Comes With A Larger Melt Zone, Which Offers High Flow Up To 20-30Mm³/S That Greatly Reduces The Possibility Of Clogging. An Extra Large Fan At The Rear Of The Extruder Offers Triple Airflows To Quickly Cool Prints And Ensures Good Layering For Better Results. It Makes The High Speed And High Temperature Possible At The Same Time. No More Ptfe Replacements Or Firmware Flashes Needed To Print With Different Materials Easily, Like Abs, Nylon..
Features
- Max Print Speed 500mm/s Klipper firmware allows SV07 Plus to speed up to 500mm/s at Maximum. SV07 Plus is equipped with 480x800 high resolution 5 inch touch screen which brings you totally different experience from knob screen and normal 4.3inch touch screen in the market. Klipper also offers a range of function options, including the height map and input shaper, while you could DIY based on your specific needs.
- High Flow Hotend Achieves 300 Printing All-metal hotend comes with a larger melt zone, which offers high flow up to 20-30mm /s that greatly reduces the possibility of clogging. An extra large fan at the rear of the extruder offers triple airflows to quickly cool prints and ensures good layering for better results. It makes the high speed and high temperature possible at the same time. No more PTFE replacements or firmware flashes needed to print with different materials easily, like ABS, Nylon.
- Larger Print Volume & Heating Faster Equipped with 600W Power supply, SV07 Plus brings super excellent and stable heating performance. Upgraded 420W heated bed can be heated to 60 in 90 seconds, which is 30 seconds faster at least than most printers in the market ( All sizes ). If you own a SV07 Plus, not only you own a 300x300x350mm larger print volume printer, but also you get super faster heating speed and printing speed.
- Planetary Dual Gear Direct Drive Extruder With Sovol's self-developed Direct Drive Extruder that comes with planetary dual gear set, SV07 Plus offers a higher drive ratio and lighter motor for precise extrusion. We also have added a large external knob to make feeding easier, so you can focus on your printing project with minimal interruptions.
- 25-point Bed Leveling SV07 Plus features 25-point auto leveling with an inductive sensor to detect and compensate for unevenness in the heated bed. This precise and smart technology makes it possible to get a fantastic first layer. Note: Set initial layer height to 0.3mm when slicing will help you get optimal results. If you have any adhension issue we recommend you to wipe the PEI surface with alcohol before the next printing.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
Dimensions: 10.43 x 25.00 x 23.43 inches | Weight: 32.06 pounds
See On Amazon #13
YOOPAI 3D Printer Enclosure for Ender- Fireproof & Dust Proof Constant Temperature Protective Cover for 3D Printers(Compitable with Most FDM Printers) 25.6 21.6 29.5
Asin: B0B67XCD4C | Model: EC-5 | PartNumber: EC-5 | Ean: 0749355988297 | UPC: 749355988297
[Noise Reduce] Enclosed Build Chamber Would Effectively Block The Noise During Printing. Get A Slight Reduction In The Already Low Noise Out Put The Printer..
[Easy Installation]5 Minutes Quick Installation. No Extra Tools Required. With Glass Fiber Cube And Stainless Steel Corner That Features Light And Strong..
[Flame Retardant] This 3D Printer Used Aluminum Foil Inside That Resist 600°C ~800 °C To Isolate Accidentally Fire. Aluminum Material For More Heat Retention..
[Constant Temprature] Keep A Constant Temperature Printing Enviroment. Reducing The Bad Impact To 3D Prints. Improve The Prints Stability At Warm Status. Help Regulate The Temperature And Reduce Drafts For Improved Print Quality And Keep Curious Fingers (Or Paws) Off Your Print..
Features
- [Multifunction Structure] hinged doors on the front of Enclosure. 25.6 21.6 29.5 Size Compitable with 99% FDM printers,Ender 3, Ender 3 Pro, Ender 3 V2,Ender 3 S1 PRO,Ender 3 S1,Ender 5,Ender 7,Anycubic Kobra, Anycubic Mega Pro.ELEGOO Naptune 3. No glue is required for assembly and can easily disassembled for moving or replacing.
- [Constant Temprature] Keep a constant temperature Printing Enviroment. Reducing the Bad impact to 3D prints. improve the prints stability at warm status. Help Regulate the temperature and reduce drafts for improved print quality and keep curious fingers (or paws) off your print.
- [Noise Reduce] Enclosed build chamber would Effectively Block the noise during printing. Get a slight reduction in the already low noise out put the printer.
- [Flame Retardant] This 3D Printer used aluminum foil inside that resist 600 C ~800 C to Isolate accidentally fire. aluminum material for more heat retention.
- [Easy Installation]5 minutes quick installation. No extra tools required. With Glass fiber Cube and stainless steel corner that features light and strong.
- See more on Amazon...
First Available: 08/10/2022
Brand: YOOPAI | Manufacturer: YOOPAI
Dimensions: 29.50 x 21.60 x 25.60 inches
Warranty: 180-days
See On Amazon #14
Sovol Dual Color PLA Filament 1.75mm, Silk PLA 3D Printing Material, Dual Color Filament Rose Blue 2 in 1 Coextrusion PLA Filament +/-0.02mm, 1kg/2.2lbs
Asin: B0C37HB5R5 | Model: Silk PLA - Rose Blue | PartNumber: Silk PLA - Rose Blue
【Easy To Print】The Diameter Tolerance Of This 1.75 Pla Filament Is +/- 0.03Mm. More Stable Diameter Tolerance Of 3D Printer Filament Would Bring You Smoother 3D Printing Experience. Universal Compatibility With Most Fdm 3D Printers And 3D Pens..
【Life-Time Guarantee】 Sovol Offers Refund If The Silk Pla Is Not Performing As Expected. Any Questions We Will Be Here To Help!.
【Eco Packaging】Instead Of Plastic Spools, We Use Paper Spool And Paper Box To Package Pla Filament. The Pla Filament Is Vacuum Packed With High Quality Desiccant To Keep Dry..
【Imported Pla Raw Material】The Raw Material Comes From The Us, And It Has Been Developed And Modulated To Show A Charming Gloss On The Pla. No Jam, No Bubbles, No Tangle, And No Layer Line. With Perfect First Layer Adhesion To Reduce Warpage, Shrinkage, Curl And Print Failure..
Features
- Dual Colors Co-extruded Filament Different from normal color change rainbow PLA filament, every inch of Sovol magic 3d filament is made of two colors-Rose and Blue. You will easily get both 2 colors, even for very small prints. You can change the visible color by rotating the color-blending filament to different orientations. Multicolor silk filaments can output with incredible pearlescent and gorgeous shiny surface.
- Imported PLA Raw Material The raw material comes from the US, and it has been developed and modulated to show a charming gloss on the PLA. No jam, no bubbles, no tangle, and no layer line. With perfect first layer adhesion to reduce warpage, shrinkage, curl and print failure.
- Easy to Print The diameter tolerance of this 1.75 PLA filament is +/- 0.03mm. More stable diameter tolerance of 3D printer filament would bring you smoother 3D printing experience. Universal compatibility with most FDM 3D printers and 3D Pens.
- ECO Packaging Instead of plastic spools, we use paper spool and paper box to package PLA filament. The PLA filament is vacuum packed with high quality desiccant to keep dry.
- Life-time Guarantee Sovol offers refund if the silk PLA is not performing as expected. Any questions we will be here to help!
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
Weight: 2.20 pounds
Warranty: 1 year manufacturer
See On Amazon #15
Sovol SV07 3D Printer with Klipper 5 inch Touch Screen, Max Print Speed 500mm/s, 300 High Temp All Metal Hotend Planetary Direct Drive Auto Leveling Meanwell Power Supply Print Size 8.66x8.66x9.84in
Asin: B0C6T85FY7 | Model: SV07 | PartNumber: SV07
【Planetary Dual Gear Direct Drive】 With Sovol's Self-Developed All Metal Direct Drive Extruder That Comes With Planetary Dual Gear Set, Sv07 Offers A Higher Drive Ratio And Lighter Motor For Precise Extrusion. We Also Have Added A Large External Knob To Make Feeding Easier, So You Can Focus On Your Printing Project With Minimal Interruptions..
【Double Sided Black Pei Plate】The Flexible Plate Of Sv07 Is Not Only A Magnetic Print Bed Which Offers Excellent Adhesion But Also A Durable Part. You Could Remove Prints Easily Without Any Tools. And Its Double Sided Design Ensures That It Will Serve Sv07 For Longer Time. If You Have Any Adhension Issue We Recommend You To Wipe The Pei Surface With Alcohol Before The Next Printing..
【25-Point Bed Leveling】Sv07 Uses 25-Point Auto Leveling With An Inductive Sensor To Detect And Compensate For Unevenness In The Heated Bed. This Precise And Smart Technology Makes It Possible To Get A Fantastic First Layer. Note: Set Initial Layer Height To 0.3Mm When Slicing Will Help You Get Optimal Results..
【300℃ High Temp Printing】All-Metal Hotend Comes With A Larger Melt Zone, Which Makes Sv07 Print At 300℃. An Extra Large Fan At The Rear Of The Extruder Offers Triple Airflows To Quickly Cool Prints And Achieves Good Layering For Better Results. It Makes The High Speed And High Temperature Possible. No More Ptfe Replacements Or Firmware Flashes Needed To Print With Different Materials Easily, Like Abs, Nylon, Carbon Fiber, Pc, Petg, Wood, Etc. (Enclosure Still Required For Printing Above 260℃).
Features
- Klipper Makes Print Speed up to 500mm/s SV07 is equipped with 480x800 high resolution 5 inch touch screen which brings you totally different experience from knob screen and normal 4.3inch touch screen in the market. Klipper firmware allows the high-speed printing of SV07 up to 500mm/s. We recommend you to choose 250mm/s for optimal results. Klipper also offers a range of function options, including the height map and input shaper, while you could DIY based on your specific needs.
- 300 High Temp Printing All-metal hotend comes with a larger melt zone, which makes SV07 print at 300 . An extra large fan at the rear of the extruder offers triple airflows to quickly cool prints and achieves good layering for better results. It makes the high speed and high temperature possible. No more PTFE replacements or firmware flashes needed to print with different materials easily, like ABS, Nylon, carbon Fiber, PC, PETG, Wood, etc. (Enclosure still required for printing above 260 )
- Planetary Dual Gear Direct Drive With Sovol's self-developed all Metal Direct Drive Extruder that comes with planetary dual gear set, SV07 offers a higher drive ratio and lighter motor for precise extrusion. We also have added a large external knob to make feeding easier, so you can focus on your printing project with minimal interruptions.
- 25-point Bed Leveling SV07 uses 25-point auto leveling with an inductive sensor to detect and compensate for unevenness in the heated bed. This precise and smart technology makes it possible to get a fantastic first layer. Note: Set initial layer height to 0.3mm when slicing will help you get optimal results.
- Double Sided Black PEI Plate The flexible plate of SV07 is not only a magnetic print bed which offers excellent adhesion but also a durable part. You could remove prints easily without any tools. And its double sided design ensures that it will serve SV07 for longer time. If you have any adhension issue we recommend you to wipe the PEI surface with alcohol before the next printing.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
Dimensions: 24.60 x 17.99 x 18.11 inches | Weight: 29.65 Pounds
See On Amazon #16
Sovol 3D Printer PLA Filament 2kg (4.4 lbs) Spool Printing Materials, Wiring Tightness, Dimensional Accuracy +/- 0.03 mm, 1.75 mm, Gray 2 Rolls
Asin: B0C332F86F
[Clog-Free & Bubble-Free] - Designed And Manufactured With Clog-Free Patent To Guarantee A Smooth And Stable Printing Experience With These Pla Refills. Pla Is Vacuum Sealed With Desiccant To Protect The Filament From Moisture To Achieve High-Precision Printing..
[Life-Time Guarantee] - Sovol Offers Refund If The Matte Pla Is Not Performing As Expected. Any Questions We Will Be Here To Help!.
[Less-Tangle And Easy To Use] - Automatic Winding Makes Less Tangle Happens. Please Make Sure To Never Let Go The Tip Of The Filament As It May Create Nodes. Holes On The Side Of The Spool Can Be Used To Prevent This Issue..
[Recycled Pla & Packaging] - Recycled Materials & Cardboard Spools Contribute To Sustainability..
Features
- [Raw Materials from the US] - Raw Materials are from well-known material manufacturer in the United States. It has higher soft point than regular PLA to keep filaments hard in hotends. Stronger toughness with low shrinkage and better layer adhesion. Various vividly matte colors provide you more choices.
- [Recycled PLA & Packaging] - Recycled materials & cardboard spools contribute to sustainability.
- [Clog-Free & Bubble-Free] - Designed and manufactured with clog-free patent to guarantee a smooth and stable printing experience with these PLA refills. PLA is vacuum sealed with desiccant to protect the filament from moisture to achieve high-precision printing.
- [Less-tangle and Easy to Use] - Automatic winding makes less tangle happens. Please make sure to NEVER let go the tip of the filament as it may create nodes. Holes on the side of the spool can be used to prevent this issue.
- [Life-time Guarantee] - Sovol offers refund if the Matte PLA is not performing as expected. Any questions we will be here to help!
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
Weight: 4.41 pounds
Warranty: 1 year manufacturer
See On Amazon #17
Sovol 32 Bit Silent Motherboard, Silent Mainboard with TMC2209 Driver for Sovol SV06 SV06 Plus 3D Printer
Asin: B07WVSJWP5 | Model: Creality Ender 5 Silent Motherboard | PartNumber: Creality Ender 5 Silent Motherboard
All-Round Heat Dissipation Design, Each Tmc2209 Chip Have Heat Sinks, Let The Cooling System Easily Cope With More Situations..
Perfect Fit For Sv06 And Sv06 Plus 3D Printer. The Firmware Presinsalled For Sv06, Plug And Play. If Your Printer Is Other Models Except Sv06 Please Flash Firmware At First..
If You Have Any Other Questions, Please Let Us Know. We Will Reply And Provide Professional Technical Support Within 24 Hours..
Support Auto Leveling, Filament Sensor And Resume Printing After A Power Failure..
High Quality Mos Tube, High Imput Impedance, Low Noise Below 50 Decibels, Good Thermal Stability..
Features
- Sovol new self-developed upgraded motherboard is equiped with 32-bit MCU and 24V power input, which makes the caculation speed faster, operation control system more sensitive, printing accuracy higher and improve stability.
- High quality MOS tube, high imput impedance, low noise below 50 decibels, good thermal stability.
- All-round heat dissipation design, each TMC2209 chip have heat sinks, let the cooling system easily cope with more situations.
- Support auto leveling, filament sensor and resume printing after a power failure.
- Perfect fit for SV06 and SV06 Plus 3D Printer. The firmware presinsalled for SV06, Plug and Play. If your printer is other models except SV06 please flash firmware at first.
- If you have any other questions, please let us know. We will reply and provide professional technical support within 24 hours.
- See more on Amazon...
Brand: Sovol | Manufacturer: Sovol
See On Amazon #18
Original Prusa i3 MK3S+ 3D Printer, Ready-to-use FDM 3D Printer, Assembled and Tested, Removable Print Sheets, Filament sample Included, Print Size 9.84 8.3 8.3 in.
Asin: B07FTMTVWG | Model: MK3S+ assembled | PartNumber: MK3S+ assembled | Ean: 8594173670051
Fully Automatic Mesh Bed Leveling Process, Ir Filament Sensor Built-In, Supports Filament Auto-Loading; Print Pauses When Filament Runs Out.
The Printer Includes A Free Sample Of Prusament Pla ~ 2X25 G; Prusa Research Offers Lifetime Technical Assistance And 24 Hours Professional Customer Service..
Genuine Gates Belts, Bondtech Drive Gears, Einsy Rambo Motherboard, And Many Other Features Are The Reason Why The Mk3s+ Is The Perfect 3D Printing Workhorse.
This Is An Assembled And Tested Printer, So To Start Your First Print, Simply Plug It In, Run The Initial Calibration, And You Are Good To Go.
Features
- The Original Prusa i3 MK3S+ is the latest version of our award-winning 3D printers, equipped with US Power Supply and 8GB SD card
- This is an assembled and tested printer, so to start your first print, simply plug it in, run the initial calibration, and you are good to go
- Fully automatic Mesh Bed Leveling process, IR filament sensor built-in, supports filament auto-loading; Print pauses when filament runs out
- Genuine Gates belts, Bondtech drive gears, EINSY RAMBo motherboard, and many other features are the reason why the MK3S+ is the perfect 3D printing workhorse
- The printer includes a Free sample of Prusament PLA ~ 2x25 g; Prusa Research offers lifetime technical assistance and 24 hours professional customer service.
- See more on Amazon...
First Available: 12/19/2021
Brand: Original PRUSA | Manufacturer: Prusa Research
Dimensions: 15.70 x 19.60 x 21.60 Inches | Weight: 24.03 pounds
Warranty: 1 year manufacturer
See On Amazon #19
Sovol Dual Color Rose Blue Silk PLA Filament 1kg & Sovol SV06 3D Printer
Asin: B0C7ZF8Y8N
【Easy To Print】The Diameter Tolerance Of This 1.75 Pla Filament Is +/- 0.03Mm. More Stable Diameter Tolerance Of 3D Printer Filament Would Bring You Smoother 3D Printing Experience. Universal Compatibility With Most Fdm 3D Printers And 3D Pens..
【Life-Time Guarantee】 Sovol Offers Refund If The Silk Pla Is Not Performing As Expected. Any Questions We Will Be Here To Help!.
【Eco Packaging】Instead Of Plastic Spools, We Use Paper Spool And Paper Box To Package Pla Filament. The Pla Filament Is Vacuum Packed With High Quality Desiccant To Keep Dry..
【Imported Pla Raw Material】The Raw Material Comes From The Us, And It Has Been Developed And Modulated To Show A Charming Gloss On The Pla. No Jam, No Bubbles, No Tangle, And No Layer Line. With Perfect First Layer Adhesion To Reduce Warpage, Shrinkage, Curl And Print Failure..
Features
- Dual Colors Co-extruded Filament Different from normal color change rainbow PLA filament, every inch of Sovol magic 3d filament is made of two colors-Rose and Blue. You will easily get both 2 colors, even for very small prints. You can change the visible color by rotating the color-blending filament to different orientations. Multicolor silk filaments can output with incredible pearlescent and gorgeous shiny surface.
- Imported PLA Raw Material The raw material comes from the US, and it has been developed and modulated to show a charming gloss on the PLA. No jam, no bubbles, no tangle, and no layer line. With perfect first layer adhesion to reduce warpage, shrinkage, curl and print failure.
- Easy to Print The diameter tolerance of this 1.75 PLA filament is +/- 0.03mm. More stable diameter tolerance of 3D printer filament would bring you smoother 3D printing experience. Universal compatibility with most FDM 3D printers and 3D Pens.
- ECO Packaging Instead of plastic spools, we use paper spool and paper box to package PLA filament. The PLA filament is vacuum packed with high quality desiccant to keep dry.
- Life-time Guarantee Sovol offers refund if the silk PLA is not performing as expected. Any questions we will be here to help!
- See more on Amazon...
Brand: Sovol
Weight: 2.20 pounds
See On Amazon
Looking For Something Else?
Search