AB Tools Diesel Injector Seat Cutter Cleaner Universal Injector Re-face Reamer 7pc
Asin: B0BXLZCC52 | Ean: 5056663611973
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Suitable For Use On A Wide Variety Of Diesel Vehicles.
Helps To Avoid Blow Back Due To Poorly Seated Injectors.
Re Face The Diesel Injector Seat.
Used To Clean And Decarbonise Injector Seats.
Features
- 7pc diesel injector seat cutter
- Used to clean and decarbonise injector seats
- Suitable for use on a wide variety of diesel vehicles
- Re face the diesel injector seat
- Helps to avoid blow back due to poorly seated injectors
- See more on Amazon...
Brand: AB Tools | Manufacturer: AB Tools
Dimensions: 2.36 x 11.81 x 8.66 inches | Weight: 3.00 Pounds
See On Amazon Similar To AB Tools Diesel Injector Seat
#1
ABN Diesel Injector Puller Tool with Slide Hammer, Common Rail Injector Remover w/ M8, M12, M14 Thread Adapter
Asin: B07FDLYD42 | Model: ABN-3124 | PartNumber: ABN-3124 | Ean: 0811498033124 | UPC: 811498033124
Great For Bosch And Lucas Injectors: This Kit Includes A 7-Inch (178 Mm) Bar And A 1.3 Lb. (.6 Kg) Slap Hammer Weight Along With M8, M12, M14 Thread Adapters; This Injector Puller Tool Assists In Removing Stubborn Bosch And Lucas Diesel Injectors; Adaptors And Slide Hammer Are Stored In A Convenient Plastic Box For Storage And Travel.
Easy To Use: To Use, First Attach The Tool To The Injector You Wish To Remove, Then Yank The Weight Towards The Handle To Give An Extra Snap Of Weight To The Stuck Part; The Force Transfers To The Shaft, Pulling The Attached End And Injector In The Desired Direction; Repeat Action Until The Part Is Removed; Always Work With A Cold Engine To Avoid Damage And Remember To Replace All Injectors As A Set To Keep Engine Balanced.
Durable Construction: Made Of A Strong, Durable Steel, This Automotive Hammer Puller Tool Is Sure To Pull Even The Toughest Fuel Injectors From Tight Positions; This Remover Kit Has A Steel Rod With Two Threaded Ends; The Durable Metal Helps To Increase Pulling Strength And Force While Also Providing Longevity For The Tool.
Replacing Old Injectors: Fuel Injectors Are Important As They Are What Injects Fuel Directly Into The Cylinder, But Because Of Their Continuous Use, They Are Prone To Cracks, Breaks, And Minor Physical Wear; Symptoms Of This Issue Can Range From Rough Engine Idle, Slow Acceleration, Misfire, Bad Gas Mileage, To Gas Leaks; This Fuel Injector Tool Helps To Easily Remove Injectors For Testing And Cleaning As Well As Replacement.
Features
- INJECTOR REMOVAL TOOL: The ABN Diesel Fuel Injector Slide Puller is designed for removing stuck common-rail diesel injectors quickly and safely without dismantling the cylinder head for injector nozzle cars; The injector remover kit contains a 1.3-pound (.6 kg) shop hammer weight and M8, M12, M14 adapters
- REPLACING OLD INJECTORS: Fuel injectors are important as they are what injects fuel directly into the cylinder, but because of their continuous use, they are prone to cracks, breaks, and minor physical wear; Symptoms of this issue can range from rough engine idle, slow acceleration, misfire, bad gas mileage, to gas leaks; This fuel injector tool helps to easily remove injectors for testing and cleaning as well as replacement
- GREAT FOR BOSCH AND LUCAS INJECTORS: This kit includes a 7-inch (178 mm) bar and a 1.3 lb. (.6 kg) slap hammer weight along with M8, M12, M14 thread adapters; This injector puller tool assists in removing stubborn Bosch and Lucas diesel injectors; Adaptors and slide hammer are stored in a convenient plastic box for storage and travel
- DURABLE CONSTRUCTION: Made of a strong, durable steel, this automotive hammer puller tool is sure to pull even the toughest fuel injectors from tight positions; This remover kit has a steel rod with two threaded ends; The durable metal helps to increase pulling strength and force while also providing longevity for the tool
- EASY TO USE: To use, first attach the tool to the injector you wish to remove, then yank the weight towards the handle to give an extra snap of weight to the stuck part; The force transfers to the shaft, pulling the attached end and injector in the desired direction; Repeat action until the part is removed; Always work with a cold engine to avoid damage and remember to replace all injectors as a set to keep engine balanced
- See more on Amazon...
Brand: ABN | Manufacturer: ABN
Dimensions: 2.50 x 12.00 x 3.00 inches
See On Amazon #2
DAYUAN Diesel Injector Puller Tool with Slide Hammer, Fuel Injector Remover with M8 M12 M14 Thread Adapters
Asin: B09Z1QDYV6 | Model: 99674 | PartNumber: 99674 | Ean: 0754008750220 | UPC: 754008750220
Constraction: The Automotive Hammer Puller Tool Has A Steel Rod With Two Threads Helps To Increase Pulling Strength To Pull The Toughest Injectors From Tight Positions..
Durable: This Diesel Injector Remover Is Made Of High Quality Steel Which Is Strong And Durable, Rust Resistant, Corrosion Resistant And Long Lasting..
Easy To Use: Install The Tool On The Injector While The Engine Not Working Cool, The Stuck Part Will Get An Extra Weight, Then Transfer This Weight To The Shaft, Pull The Connected End And The Injector In The Desired Direction, Keep Repeating This Action Until The Injector Is Removed..
Fitment: This Diesel Injector Puller Tool Assists In Removing Stubborn Bosch And Lucas Diesel Injectors, Is A Great Replacement For Bosch And Lucas..
Features
- Function: Fuel Injectors inject fuel directly into the cylinder, if used continuously for a long time, they are prone to crack and minor physical wear, which may lead to engine instability, misfire, high fuel consumption or oil leaks. This diesel injector puller easily and safely removes injectors for testing, cleaning and replacement without removing the cylinder head.
- Fitment: This diesel injector puller tool assists in removing stubborn Bosch and Lucas diesel injectors, is a great replacement for Bosch and Lucas.
- Constraction: The automotive hammer puller tool has a steel rod with two threads helps to increase pulling strength to pull the toughest injectors from tight positions.
- Easy to use: Install the tool on the injector while the engine not working cool, the stuck part will get an extra weight, then transfer this weight to the shaft, pull the connected end and the injector in the desired direction, keep repeating this action until the injector is removed.
- Durable: This diesel injector remover is made of high quality steel which is strong and durable, rust resistant, corrosion resistant and long lasting.
- See more on Amazon...
Brand: DAYUAN | Manufacturer: Yinyuan Tools
Dimensions: 2.95 x 12.01 x 3.74 inches
See On Amazon #3
maXpeedingrods 40 Pcs Diesel Fuel Injector Puller Auto Truck Diesel Injector Extractor Removal Tool Slide Hammer Bearing Puller for Diesel Engines
Asin: B078NT4SLX
Diesel Injector Extractor Master Set - 3 Different Slide Hammers: 1.6 Kg, 160 Mm; 2.7 Kg, 460 Mm; 5.1 Kg, 600 Mm; 2 Pulling Claws With Fork Opening: 13.7 X 18 Mm, 105 Mm;12.7 X 19 Mm, 130 Mm; 5 Slotted 6-Pt 1/2" Sockets, 100 Mm Length; Sizes 25 - 27 - 28 - 29 - 30 Mm; Injector Extractor, Sleeve Design, With Shells: Outer Diameter 35 Mm; Internal Diameter 29 Mm, M17 X 1.0 Spindle; Pulling Adapter With External Thread.
Perfect Kit For You - Maxpeedingrods Diesel Injector Puller Kit Is Very Suitable For Professional Machinist Or Diy Enthusiast.
High Quality Carbon Steel - The Diesel Injector Extractor Set Are Composed Of High-Quality Carbon Steel, Which Is Treated At High Temperature Throughout The Whole Process And Has A Long Service Life. It Is Suitable For Quickly And Safely Disassembling The Fuel Nozzles.
6 Adaptors - M14 X 1.5 For Dalphi-Adaptor; M17 X 1 For Bosc-H Adaptor; M20 X 1 For Den-So Adapters; M25 X 1 For Siemen-S Adapter; M27 X 1 For Siemen-S Adapter; M27 X 1 For Bosc-H Injector Nozzle Adaptor.
Features
- UNIVERSAL APPLICATION - Various adaptor make the set suitable for most diesel injectors. Make your work easier for removal of diesel injectors quickly and great for pulling jobs, against the bearing for pulling out evenly without damage the parts
- 6 ADAPTORS - M14 x 1.5 for dalphi-adaptor; M17 x 1 for bosc-h adaptor; M20 x 1 for den-so adapters; M25 x 1 for siemen-s adapter; M27 x 1 for siemen-s adapter; M27 x 1 for bosc-h injector nozzle adaptor
- DIESEL INJECTOR EXTRACTOR MASTER SET - 3 Different slide hammers: 1.6 kg, 160 mm; 2.7 kg, 460 mm; 5.1 kg, 600 mm; 2 Pulling claws with fork opening: 13.7 x 18 mm, 105 mm;12.7 x 19 mm, 130 mm; 5 Slotted 6-pt 1/2 sockets, 100 mm length; sizes 25 - 27 - 28 - 29 - 30 mm; Injector extractor, sleeve design, with shells: outer diameter 35 mm; internal diameter 29 mm, M17 x 1.0 spindle; pulling adapter with external thread
- HIGH QUALITY CARBON STEEL - The diesel injector extractor set are composed of high-quality carbon steel, which is treated at high temperature throughout the whole process and has a long service life. It is suitable for quickly and safely disassembling the fuel nozzles
- PERFECT KIT FOR YOU - maXpeedingrods diesel injector puller kit is very suitable for professional machinist or DIY enthusiast
- See more on Amazon...
Brand: maXpeedingrods | Manufacturer: maXpeedingrods
Dimensions: 5.51 x 25.20 x 16.93 Inches | Weight: 47.18 pounds
See On Amazon #4
E-cowlboy 9U-6891 Injector Sleeve Cup Remover&Installer Set for CAT Caterpillar 3406E C10 C12 C15 C16 C-18 Engine Heavy Duty Steel (6 PCS)
Asin: B07SGPX2ZB | Model: HG-1547 | PartNumber: HG-1547 | Ean: 7426999800040
Benefits — Used To Install And Remove Injector Sleeves. Works In A Easier Way To Save Your Time And Money..
100% Satisfaction Guarantee — If You're Not 100% Satisfied With Our Tools, Simply Return It For A Full Refund In 30 Days. Support 12 Months’ Warranty. Professional & Sincere Service Allows You To Take No Risks To Purchase In E-Cowlboy!.
Includes 6 Tools — 9U6877 Thrust Bearing / 9U7258 Driver Cap / 221-9778 Puller Stud / 4K-0367 Nut - Full / 5P-8247 Hard Washer /128-7889 Puller Bridge..
Superior Quality — Advanced Heavy Duty Steel Process, Durability, Anti-Corrosion, High Precision And Hardness To Provide A Much Longer Service Life..
Features
- Great Compatibility Works on Caterpillar (CAT) C-10,C-12,C-15,C-16,C-18 and 3406E Engines. (The new puller bridge can be used on all three engines)
- Superior Quality Advanced heavy duty steel process, durability, anti-corrosion, high precision and hardness to provide a much longer service life.
- Benefits Used to install and remove injector sleeves. Works in a easier way to save your time and money.
- Includes 6 Tools 9U6877 Thrust Bearing / 9U7258 Driver Cap / 221-9778 Puller Stud / 4K-0367 Nut - Full / 5P-8247 Hard Washer /128-7889 Puller Bridge.
- 100% Satisfaction Guarantee If you're not 100% satisfied with our tools, simply return it for a full refund in 30 days. Support 12 months Warranty. Professional & Sincere Service allows you to take no risks to purchase in E-cowlboy!
- See more on Amazon...
Brand: E-cowlboy | Manufacturer: E-cowlboy
See On Amazon #5
8MILELAKE Diesel Injector Puller Extractor Tool Slide Hammer Puller Set
Asin: B088FBTG11
Pro Kit: Made By Professionals For Professionals, Ideal For The Professional Mechanic Or Enthusiastic Diyer..
Complete Set: Includes 3 Different Slide Hammers 1.6 Kg; 160 Mm Length 2.7 Kg; 460 Mm Length 5.1 Kg; 600 Mm Length; 2 Pulling Claws With Fork Opening 13.7 X 18 Mm; 105 Mm Length 12.7 X 19 Mm; 130 Mm Length..
Easy Storage: Come With A Heavy Duty Molded Storage Case For Easy Transport And Storage..
Universal Fit: Various Adaptors Make The Kit Suitable For Most Diesel Injectors..
Features
- SIMPLE USE: Designed for the fast and safe removal of Bosch, Delphi, Denso and Siemens diesel injectors.
- UNIVERSAL FIT: Various adaptors make the kit suitable for most diesel injectors.
- PRO KIT: Made by professionals for professionals, ideal for the professional mechanic or enthusiastic DIYer.
- EASY STORAGE: Come with a heavy duty molded storage case for easy transport and storage.
- COMPLETE SET: Includes 3 different Slide Hammers 1.6 Kg; 160 mm Length 2.7 Kg; 460 mm Length 5.1 Kg; 600 mm Length; 2 Pulling Claws With Fork Opening 13.7 X 18 mm; 105 Mm Length 12.7 X 19 mm; 130 mm Length.
- See more on Amazon...
Brand: 8MILELAKE | Manufacturer: freebirdtrading
Dimensions: 2.32 x 18.11 x 1.77 inches
See On Amazon #6
KPALAG Common Rail Injector Tube Removal Tool Compatible with Dodge Ram 2500 3500 4000 4500 5500 with Cummins 5.9L 6.7L Engines Replace #: 933-3401
Asin: B0CBJW788W | Model: KP933-3401 | PartNumber: KP933-3401 | Ean: 0799149666634 | UPC: 799149666634
【Fit For】This Injector Tool Is Compatible With 2007- 2010 Dodge Ram 2500 6.7L; 2003- 2008 Dodge Ram 2500 5.9L; 2007- 2010 Dodge Ram 3500 6.7L; 2003- 2007 Dodge Ram 3500 5.9L; 2005- 2006 Dodge Ram 4000 5.9L; 2008- 2010 Dodge Ram 4500 6.7L; 2008- 2010 Dodge Ram 5500 6.7L; 2003-2018 Dodge Cummins 5.9L 6.7L..
【Package Included】: 1X Common Rail Injector Tube Removal Tool As Shown On The Picture..
【Easy To Use】: This Common Rail Injector Tube Removal Tool Helps With The Remove The Injector Tube Without Damaging The Cup In The Process.It Is Easy To Use , No Special Skills Are Required..
【Replace Part Number】: 933-3401.
Features
- Reliable Quality :This common rail injector tube removal tool is made of high-quality carbon steel with good durability. The black coating on the surface has good anti - rust and corrosion resistance, which can withstand the test of long-term and repeated use.
- Replace Part Number : 933-3401
- Fit for This injector tool is compatible with 2007- 2010 Dodge Ram 2500 6.7L; 2003- 2008 Dodge Ram 2500 5.9L; 2007- 2010 Dodge Ram 3500 6.7L; 2003- 2007 Dodge Ram 3500 5.9L; 2005- 2006 Dodge Ram 4000 5.9L; 2008- 2010 Dodge Ram 4500 6.7L; 2008- 2010 Dodge Ram 5500 6.7L; 2003-2018 Dodge Cummins 5.9L 6.7L.
- Easy to use : This common rail injector tube removal tool helps with the remove the injector tube without damaging the cup in the process.It is easy to use , no special skills are required.
- Package Included : 1x Common rail injector tube removal tool as shown on the picture.
- See more on Amazon...
Brand: KPALAG | Manufacturer: KPALAG
Warranty: Yes
See On Amazon #7
Injection Pump Gear Puller & Cummins Engine Barring/Rotating Tool & 13mm Injection Pump and Idle Nut Wrench Tool for 1989-2002 Dodge Ram Cummins Diesel Engines Bosch VE P7100 VP44 4BT 6BT IP
Asin: B07ZYM6445 | Model: PD03 | PartNumber: PD03 | Ean: 7427046750424
13Mm Nut Wrench -- Works On Cummins B Series 5.9L Diesel Engines Dodge Trucks. Designed To Remove And Install The 13Mm Injection Pump Mounting Bolts And Idle Lock Nuts..
100% Satisfaction Guarantee-- If You're Not 100% Satisfied With The Tool, Simply Return It For A Full Refund In 30 Days, Premium Support & 12 Months’ Warranty..
Function-- Will Effortlessly Pull Any 1989-2002 Dodge Ram Cummins Injection Pump Gear..
Engine Barring Tool-- Works On Dodge Pickups 3.9L, 5.9L, 6.7L & 8.3L Diesels Engines And Cummins B/C Series Diesels Engines..
Features
- Injection Pump Gear Puller-- Works on all VE, P7100, and VP44 Pumps, fits Cummins Both 4BT and 6BT.
- Engine Barring Tool-- Works on Dodge Pickups 3.9L, 5.9L, 6.7L & 8.3L diesels engines and Cummins B/C Series diesels engines.
- 13mm Nut Wrench -- Works on Cummins B series 5.9L diesel engines Dodge trucks. Designed to remove and install the 13mm injection pump mounting bolts and idle lock nuts.
- Function-- Will effortlessly pull any 1989-2002 Dodge Ram Cummins injection pump gear.
- 100% Satisfaction Guarantee-- If you're not 100% satisfied with the tool, simply return it for a full refund in 30 days, Premium Support & 12 Months Warranty.
- See more on Amazon...
Brand: E-cowlboy | Manufacturer: Bird's wings
See On Amazon #8
E-cowlboy 9U-6891 Injector Sleeve Remover Installer Set+9U-7227 Injector Height Tool+J-38587-a Engine Barring Socket for CAT Caterpillar 3406E C-15 C-16 Engines (8 PCS)
Asin: B081RBCZYS | Model: HG - 3406 | PartNumber: HG - 3406 | Ean: 7427046756273
Benefits — Used To Install And Remove Injector Sleeves. Easily & Precisely Adjust The Injector Height Of The Engine And Easy To Rotate The Engine..
100% Satisfaction Guarantee — If You're Not 100% Satisfied With Our Tools, Simply Return It For A Full Refund In 30 Days. Support 12 Months’ Warranty. Professional & Sincere Service Allows You To Take No Risks To Purchase In E-Cowlboy!.
Include 8 Tools — 9U6877 Thrust Bearing / 9U7258 Driver Cap / 221-9778 Puller Stud / 4K-0367 Nut - Full / 5P-8247 Hard Washer /128-7889 Puller Bridge / 9U-7227 Injector Height Tool / J-38587-A Engine Barring Socket..
Superior Quality — Advanced Precision Machined Out Of Aircraft Grade Billet Aluminum And Heavy Duty Steel Process, Durability, Anti-Corrosion And Anti-Rust. High Precision And Hardness To Provide A Much Longer Service Life..
Features
- Great Compatibility Works on Caterpillar (CAT) 3406E / C-15 / C-16. Essential tool kit for engine operation to save your time and money!
- Superior Quality Advanced precision machined out of aircraft grade billet aluminum and heavy duty steel process, durability, anti-corrosion and anti-rust. High precision and hardness to provide a much longer service life.
- Benefits Used to install and remove injector sleeves. Easily & Precisely adjust the Injector Height of the engine and easy to rotate the engine.
- Include 8 Tools 9U6877 Thrust Bearing / 9U7258 Driver Cap / 221-9778 Puller Stud / 4K-0367 Nut - Full / 5P-8247 Hard Washer /128-7889 Puller Bridge / 9U-7227 Injector Height Tool / J-38587-A Engine Barring Socket.
- 100% Satisfaction Guarantee If you're not 100% satisfied with our tools, simply return it for a full refund in 30 days. Support 12 months Warranty. Professional & Sincere Service allows you to take no risks to purchase in E-cowlboy!
- See more on Amazon...
Brand: E-cowlboy | Manufacturer: E-cowlboy
See On Amazon #9
Injector Sleeve Cup Bore Seat Cleaning Brush Kit Fits for 1994-2018 Ford Powerstroke 6.0/6.4/6.7/7.3 Engine Caterpillar 3126 C7 C9 Replace AP0084 AP0085 3252
Asin: B0BMT84Y2N | Model: Brush | PartNumber: Brush | Ean: 0768679397301 | UPC: 768679397301
✔Clean Your Engine: Cleaning Carbon Deposits , Rust , Dirt Out Of Injector Seats, Bores, And Cups Without Damage..
✔Customer Service: All Products Are Sold After Strict Inspection. We Provide With Professional Consulting All The Time. Contact With Us If You Have Anything With Question, We'll Reply Within 16 Hours To Offer Help..
✔Easy To Use: No Skills Required, Just A Clean Tool, You Can Finish Them In Minutes..
✔High Quality: Made Of High Standard Steel Wire And Pvc Coated Handle, Practical And Durable In Use, A+ Performance In Both Function And Life Time..
Features
- Fits for: Ford 4.5L LCF 6.0L 6.4L 6.7L and 7.3L Powerstroke, Caterpillar(CAT) 3126 C7 C9 , Navistar T444E DT466 VT365 VT275 , MaxxForce 5/7/DT/9/10/N9/N10 ,GM , Chevy 6.6L , Dodge Cummins 5.9L 6.7L , 4.5L 6.8L 8.1L 9.0L HPCR , Isuzu 4HK1 6HK1 HPCR.
- High Quality: Made of high standard Steel Wire and PVC coated handle, practical and durable in use, A+ performance in both function and life time.
- Clean your Engine: Cleaning carbon deposits , rust , dirt out of injector seats, bores, and cups without damage.
- Easy to Use: No skills required, just a clean tool, you can finish them in minutes.
- Customer Service: All products are sold after strict inspection. We provide with professional consulting all the time. Contact with us if you have anything with question, we'll reply within 16 hours to offer help.
- See more on Amazon...
Brand: CULMKARI | Manufacturer: CULMKARI
Warranty: 1 year.
See On Amazon #10
TradeINArt 5pcs Diesel Injector Seat Cutter Cleaner Diesel Injector Set with Flat Reamer Angled Reamer Hex Key Fit for Mercedes-Benz PSA Renault Bosch
Asin: B0B86CYRC3 | Model: XT9-001 | PartNumber: XT9-001
17X17mm Flat Reamer For Delphi/Bosch Injector(Bmw, Ranult, Ford).
17X21mm Angle Reamer For Fiat, Iveco.
Coming With Carrying Case, You Can Easily Organize Every Piece Of This Set In An Orderly Manner, Ready For Your Next Job. The Kit Can Also Be Protected During Storage To Avoid Damage Or Loss..
17X19mm Flat Reamer For Bosch Injector(Benz).
15X19mm Flat Reamer For Universal Injector.
Features
- Special designed for cleaning and re-cutting injector seats on common rail diesel engines.
- 15X19mm flat reamer for universal injector
- 17X17mm flat reamer for Delphi/Bosch injector(BMW, Ranult, Ford)
- 17X19mm flat reamer for Bosch injector(BENZ)
- 17X21mm angle reamer for FIAT, Iveco
- Coming with carrying case, you can easily organize every piece of this set in an orderly manner, ready for your next job. The kit can also be protected during storage to avoid damage or loss.
- See more on Amazon...
Brand: TradeINArt | Manufacturer: XIAOTONG
Warranty: 1 year
See On Amazon #11
Prokomon 17 pcs Diesel Injector Seat Cutter Cleaner Tool Flat Reamer Repair Removal Tool Compatible for BMW Mercedes-Benz Renault Ford
Asin: B086W1WV4C | Model: PT1364M | PartNumber: PT1364M | Ean: 0741663699322 | UPC: 741663699322
◇ High Performance --- Double-Headed Hammer, Made Of High-Grade Carbon Steel Combined With Engineering Plastic, Strong And Durable..
◇ Range Of Use --- Diesel Injector Seat Cutter Is Compatible For Bmw, Ford, Peugeot, Citroen, Renault, Bosch And Fiat..
◇ Contents --- Includes 9 Flat Blades, 4 Angled Blades, 1 Pilot Hex, 1 T-Handle, 1 Cutter, 1 Allen Wrench, And 1 Carrying Case..
◇ Essential Safety Tools --- One End Is A Seat Belt Cutter For Cutting Seat Belts And The Other End Is A Window Breaker Tool With Two Hardened, Sharp, Heavy Carbon Steel Points..
Features
- Function --- Diesel injector seat cutter cleaning tool is suitable for cleaning and repairing the sealing surfaces of injectors and cylinder heads.
- Essential Safety Tools --- One end is a seat belt cutter for cutting seat belts and the other end is a window breaker tool with two hardened, sharp, heavy carbon steel points.
- High Performance --- Double-headed hammer, made of high-grade carbon steel combined with engineering plastic, strong and durable.
- Contents --- Includes 9 flat blades, 4 angled blades, 1 pilot hex, 1 T-handle, 1 cutter, 1 allen wrench, and 1 carrying case.
- Range Of Use --- Diesel injector seat cutter is compatible for BMW, Ford, Peugeot, Citroen, Renault, Bosch and Fiat.
- See more on Amazon...
Brand: Prokomon | Manufacturer: Prokomon
See On Amazon #12
SCITOO 10pcs Seat Cutter Diesel Injector Set with Flat Reamer T-Handle Angled Reamer Hex Key Fit for Mercedes-Benz PSA Renault Bosch
Asin: B07HHVLWW4 | Model: 105435-5206-1338491681 | PartNumber: 105435-5206-1338491681 | Ean: 1907492018133
Features - High Performance And Durable. Double-Tipped Hammers Which Are Made Of High Grade Carbon Steel Combined With Engineering Plastics. More Convenient And Durable..
1 Year Warranty - We Provide 1 Year Warranty For You. Make Sure The Car Information Before Purchasing It,Feel Free To Contact Us If You Have Any Question..
What You Get - 10Pc Diesel Injector Seat Cutter Set Cleaner Carbon Cutting Tool: 5Pcs Flat Reamer, 2Pcs Angled Reamer,1 X Pilot Post,1 X T Handle,1Pc 15.5 X 225Mm Cutter ,1Pc 2.5Mm Hex Key,1Pc Blow Case.
Fitment - The Tool Set Fit For Bmw ,Mercedes-Benz Psa, Renault ,Ford..
Features
- FUNCTION - Brand New Diesel Injector Seat Cutter Set Cleaner Carbon Tool Kit, used to clean and decarbonise injector seats when changing injectors.
- FITMENT - The Tool Set fit for BMW ,Mercedes-Benz PSA, Renault ,Ford.
- FEATURES - High performance and durable. Double-tipped hammers which are made of high grade carbon steel combined with engineering plastics. More convenient and durable.
- WHAT YOU GET - 10PC Diesel Injector Seat Cutter Set Cleaner Carbon Cutting Tool: 5PCS flat reamer, 2PCS angled reamer,1 x pilot post,1 x T handle,1PC 15.5 X 225mm Cutter ,1PC 2.5mm Hex Key,1PC Blow Case
- 1 YEAR WARRANTY - We provide 1 year warranty for you. Make sure the car information before purchasing it,feel free to Contact us if you have any question.
- See more on Amazon...
Brand: SCITOO | Manufacturer: SCITOO
Dimensions: 2.36 x 11.61 x 8.46 inches | Weight: 4.00 Pounds
Warranty: 1 Year
See On Amazon #13
Fuel Control Actuator for Dodge Cummins Diesel 5.9L 2003-2007
Asin: B0792V3V28 | Ean: 7500652701933
Replaces Part # - For Bosch 0 928 400 666, For Cummins 4932457..
You'll Gett - 1 X Diesel Fuel Regulator.
Other Names Of This Part - For Mprop Fca, Injection Pressure Regulator, Fuel Pressure Regulator, Fuel Control Actuator, Measuring Unit..
Replaces Part # - For Bosch 0 928 400 666, For Cummins 4932457..
Features
- FITS VEHICLES - for 2003-2007 Dodge Ram Cummins 2500 3500 5.9L Diesel.
- REPLACES PART # - for Bosch 0 928 400 666, for Cummins 4932457.
- REPLACES PART # - for Bosch 0 928 400 666, for Cummins 4932457.
- OTHER NAMES OF THIS PART - for MPROP FCA, Injection Pressure Regulator, Fuel Pressure Regulator, Fuel Control Actuator, Measuring Unit.
- YOU'LL GETT - 1 x Diesel Fuel Regulator
- See more on Amazon...
Brand: USonline911
Weight: 0.11 Pounds
See On Amazon #14
8MILELAKE Diesel Injector Flow Diagnostic Cylinder Common Rail Adaptor Test Tool Kit
Asin: B0186OY51Q | Model: Tester | PartNumber: Tester | Ean: 0700425112349 | UPC: 700425112349
Possibility Of Simultaneous Measurement Of Up To 6 Injectors.
Blow Mold Case For Storage.
24Pcs Injector Adaptors For Bosch-01, Siemens-02, Denso-03 And Delphi Injectors.
Measurement Of Return Flow Using External Flow Meter.
Features
- Direct measurement of return flow of the injector
- Measurement of return flow using external flow meter
- Possibility of simultaneous measurement of up to 6 injectors
- 24pcs injector adaptors for BOSCH-01, SIEMENS-02, DENSO-03 and DELPHI injectors
- Blow mold case for storage
- See more on Amazon...
Brand: 8MILELAKE | Manufacturer: freebirdtrading
Dimensions: 2.36 x 5.91 x 4.72 Inches | Weight: 2.20 Pounds
See On Amazon #15
AB Tools-US Pro 3pc Diesel Injector Extractor Puller Mercedes CDI Sprinter C & E Class AT977
Asin: B01MRFNIUM | Ean: 5056133311853
17Mm X 1.0 P.
Supplied In Blow Moulded Case.
This Type Is Fitted To C-Class, E-Class & Sprinters.
Includes Injector Cap Removal Socket.
Features
- Specially Designed for Mercedes CDI engines
- Includes injector cap removal socket
- 17mm x 1.0 P
- This type is fitted to C-Class, E-Class & Sprinters
- Supplied in blow moulded case
- See more on Amazon...
Brand: AB Tools-US Pro | Manufacturer: AB Tools-US Pro
Dimensions: 3.15 x 11.81 x 9.45 inches | Weight: 3.57 pounds
See On Amazon #16
9U-7227 Injector Height Tool + J-38587-A Engine Barring Socket Turning Tool + 9U-6891 Injector Tube Sleeve Cup Removal & installer Tools Set Fits for CAT Caterpillar 3406E C15 C16 Engines (8 PCs)
Asin: B08P1TLKRB | Model: B-6891 | PartNumber: B-6891
【9U-7227 Diesel Engine Injector Timing Fixture】Used For Quickly And Correctly Adjusting Fuel Injectors To Obtain A Dimension Of 78.0 ± 0.2 Mm (3.07 ± 0.01 Inch). The Dimension Is Measured From The Top Of The Unit Injector To The Machined Ledge Of The Fuel Injector Body..
【100% Satisfaction Guarantee】If You're Not Satisfied With This Kit, Simply Return It For A Full Refund In 30 Days. While You Have Any Questions About Our Products, Please Feel Free To Contact Us And We Will Provide The Best Service. Always Buy Confidently In Bonbo!.
【9U-6891 Injector Sleeve Remover & Installer Tools Set】Designed To Remove And Install The Injector Sleeves Quickly And Easily. Works In An Easier Way To Save Your Time And Money..
【J-38587-A Engine Barring Socket Tool】Direct Replacement For 6749 Enl80-0054 & 9S9082. Used To Manually Turn Over Engine While Servicing, Was Able To Pin Flywheel Without The Help Of Another Person. Allows Adjust Injectors And Valve Lash Much Easier With This Tool..
Features
- Great Compatibility Perfectly fits for CAT Caterpillar 3406E C-15 C-16 engines. These essential handy tools set for service the engines to save your time and money.
- J-38587-A Engine Barring Socket Tool Direct replacement for 6749 ENL80-0054 & 9S9082. Used to manually turn over engine while servicing, was able to pin flywheel without the help of another person. Allows adjust injectors and valve lash much easier with this tool.
- 9U-7227 Diesel Engine Injector Timing Fixture Used for quickly and correctly adjusting fuel injectors to obtain a dimension of 78.0 0.2 mm (3.07 0.01 inch). The dimension is measured from the top of the unit injector to the machined ledge of the fuel injector body.
- 9U-6891 Injector Sleeve Remover & installer Tools Set Designed to remove and install the injector sleeves quickly and easily. Works in an easier way to save your time and money.
- 100% Satisfaction Guarantee If you're not satisfied with this kit, simply return it for a full refund in 30 days. While you have any questions about our products, please feel free to contact us and we will provide the best service. Always buy confidently in Bonbo!
- See more on Amazon...
Brand: Bonbo | Manufacturer: Bonbo
See On Amazon #17
DKwoeshg 21x Diesel Injector Puller Professional Pneumatic Injector Extractor Puller Kit
Asin: B0CPY18QXJ | Model: D100171 | PartNumber: D100171
Wide Compatibility Range: Accommodates A Variety Of Connection Types Such As Solenoid Coil And Screw Connections, Ensuring Universal Applicability For Cr Injectors With An Inclusive Set Of Adaptors: M20×1.0, M18×0.75, M17×1.0, M8×1.25, M8×1.0, M8×1.5, M14×1.5, M12×1.5, M16×1.5, M18×1.5, M20×1.5, M22×1.5, M25×0.5, M25×1.0, M26×0.75, M29×1.0, M31×0.75, M27×0.75, M27×1.0..
Robust Construction And Design: Engineered For Durability And Precision, This Tool Set Is Built To Facilitate The Effortless Disassembly Of Tight Fuel Injectors, Reducing Labour Time And Enhancing The Efficiency Of Vehicle Servicing Tasks..
Extensive Brand Support: The Tool Set Supports Numerous Injector Systems Such As By/Denso/Cy/Crin2/Crin, Cat320, Cummins, Xf, Bosch110, Bosch120, Denso/A, Guaranteeing Its Utility Across Diverse Engine Models..
Comprehensive 19-Piece Adapter Set: Includes Versatile Adapters Tailored For A Wide Array Of Fuel Injectors, Including Popular Brands Like Bosch, Delphi, Denso, And Siemens, Making It A Must-Have For Professional Mechanics And Automotive Enthusiasts..
Features
- High-Efficiency Air Pressure System: Operates effectively within a range of 5 - 8bar, utilizing impact force to remove even the most stubborn fuel injectors, ensuring a seamless maintenance experience.
- Comprehensive 19-Piece Adapter Set: Includes versatile adapters tailored for a wide array of fuel injectors, including popular brands like Bosch, Delphi, Denso, and Siemens, making it a must-have for professional mechanics and automotive enthusiasts.
- Wide Compatibility Range: Accommodates a variety of connection types such as solenoid coil and screw connections, ensuring universal applicability for CR injectors with an inclusive set of adaptors: M20 1.0, M18 0.75, M17 1.0, M8 1.25, M8 1.0, M8 1.5, M14 1.5, M12 1.5, M16 1.5, M18 1.5, M20 1.5, M22 1.5, M25 0.5, M25 1.0, M26 0.75, M29 1.0, M31 0.75, M27 0.75, M27 1.0.
- Extensive Brand Support: The tool set supports numerous injector systems such as BY/DENSO/CY/CRIN2/CRIN, CAT320, CUMMINS, XF, BOSCH110, BOSCH120, DENSO/A, guaranteeing its utility across diverse engine models.
- Robust Construction and Design: Engineered for durability and precision, this tool set is built to facilitate the effortless disassembly of tight fuel injectors, reducing labour time and enhancing the efficiency of vehicle servicing tasks.
- See more on Amazon...
Brand: DKwoeshg | Manufacturer: NINGBO ZHENHAI TOPTOOL CO.,LTD.
Warranty: 2 years manufacturer
See On Amazon #18
9U-6891 Injector Sleeve Cup Remover & Installer Tool 6pcs Kit Compatible with CAT Caterpillar 3406E C10 C12 C15 C16 C18 Engine Heavy Duty Steel Tools
Asin: B09VBWG2Y8
Material:Made Of Sturdy Steel, Super Corrosion And Rust Resistant..
100% Satisfaction Guarantee: Don't Hesitate To Contact Us If Any Questions,We Will Offer Professional And Satisfactory Service..
Function:Designed To Install And Remove Injector Sleeves..
Features
- Compatible with Caterpillar (CAT) C-10,C-12,C-15,C-16,C-18 and 3406E Engines.
- Function:Designed to Install and Remove Injector Sleeves.
- Material:Made of sturdy steel, super corrosion and rust resistant.
- 100% Satisfaction guarantee: Don't hesitate to contact us if any questions,we will offer Professional and satisfactory service.
- See more on Amazon...
Brand: Winsgor | Manufacturer: Winsgor
See On Amazon #19
Diesel Fuel Injector Remover Injectors Puller Tool Replacement for Bosch, Lucas Injectors with M8/M12/M14 Thread Adapter, 1.3-pound Shop Hammer Weight and A Red Box
Asin: B0C4HCW3Q9
Material: This Diesel Fuel Injector Remover Is Made Of High Quality Steel That Is Strong And Durable, Rust Resistant, Corrosion Resistant And Long Lasting; The Automotive Hammer Pulling Tool Has A Steel Rod With Two Threads That Help Increase Pulling Strength To Pull The Toughest Injectors..
Reliable Service: One Year After-Sales. All Of Our Products Are Rigorously Inspected And Tested To Ensure That Our Customers Receive Satisfactory Goods..
Easy To Use:This Diesel Injector Remover Is Also Very Easy To Use, With The Engine Not Working Cool, Install The Tool On The Injector, The Stuck Part Will Get An Extra Weight, Then Transfer This Weight To The Shaft, Pull The Connected End And The Injector In The Desired Direction, Keep Repeating This Action Until The Injector Is Removed.
Function: Injectors Are An Important Part Of The Car And If Used Continuously For A Long Time, They Are Prone To Cracking And Minor Physical Wear, Which May Lead To Engine Instability, Misfire, High Fuel Consumption Or Oil Leaks, So This Diesel Injector Remover Quickly And Safely Removes Stuck Common Rail Diesel Injectors For Testing, Cleaning And Replacement Without Removing The Cylinder Head..
Features
- Fitment: This diesel fuel injector remover is replacement for Bosch, Lucas injectors,and the package included 1 x 1.3-pound (6 kg) shop hammer weight, 3 x adapters( M8, M12, M14 ),1 x red box
- Function: Injectors are an important part of the car and if used continuously for a long time, they are prone to cracking and minor physical wear, which may lead to engine instability, misfire, high fuel consumption or oil leaks, so this diesel injector remover quickly and safely removes stuck common rail diesel injectors for testing, cleaning and replacement without removing the cylinder head.
- Material: This diesel fuel injector remover is made of high quality steel that is strong and durable, rust resistant, corrosion resistant and long lasting; the automotive hammer pulling tool has a steel rod with two threads that help increase pulling strength to pull the toughest injectors.
- Easy to use:This diesel injector remover is also very easy to use, with the engine not working cool, install the tool on the injector, the stuck part will get an extra weight, then transfer this weight to the shaft, pull the connected end and the injector in the desired direction, keep repeating this action until the injector is removed
- Reliable Service: One year after-sales. All of our products are rigorously inspected and tested to ensure that our customers receive satisfactory goods.
- See more on Amazon...
Brand: NIKUJUGA | Manufacturer: NIKUJUGA
See On Amazon #20
Tuningsworld 7.3 Injectors Sleeve Cup Removal Installation Tool for Ford 7.3L Powerstroke 1994-2003 with O-Ring Seal Kit, OE Part Number 1833564C92 1814376C1 1833564C92, 1833564C91, 1823492C97
Asin: B08BZKP9F8 | Ean: 6941477725499
【Replace For Injector O-Rings Number】Xc3z-9229-Ab, Xc3z9229aa, Cm-5010, 1833564C92, 1833564C91, 1823492C97.
【Package Contents】1X Fuel Injector Sleeve Installer, 1X Fuel Injector Sleeve Remover In-Vehicle Alternative, 8 X F4tz-9F538-A Sleeve, 48X Injector O-Ring And Seal.
【Replace For Injector Cup Number】 F4tz-9F538-A, F4tz9f538a, 1814376C1.
【A Must Have】For Any Shop Working On Powerstroke 7.3L Engines. This Fuel Injector Sleeve Tool Helps With The Removal And Installation Of The Injector Cups Without Damaging The Cup In The Process..
Features
- Fitment for Ford 7.3L Powerstroke 1994-2003; for Navistar T444E, DT466E Diesel Engines; for Caterpillar 3126,3126B,3126E Diesel Engines
- A Must Have for any shop working on Powerstroke 7.3L Engines. This Fuel Injector Sleeve Tool helps with the removal and installation of the injector cups without damaging the cup in the process.
- Replace for Injector O-rings Number XC3Z-9229-AB, XC3Z9229AA, CM-5010, 1833564C92, 1833564C91, 1823492C97
- Replace for Injector Cup Number F4TZ-9F538-A, F4TZ9F538A, 1814376C1
- Package Contents 1x Fuel Injector Sleeve Installer, 1x Fuel Injector Sleeve Remover In-Vehicle Alternative, 8 x F4TZ-9F538-A Sleeve, 48x Injector O-Ring and Seal
- See more on Amazon...
Brand: Tuningsworld | Manufacturer: Tuningsworld
Dimensions: 5.12 x 11.02 x 5.12 inches | Weight: 3.20 Pounds
See On Amazon
Looking For Something Else?
Search