SHILLEHTEK ADXL345 Pre-Soldered 3-axis Accelerometer Compatible with Klipper, Raspberry Pi & Arduino | High Resolution Tilt-Sensing Accelerometer | Resonance Frequencies Measurement & Klipper Autotune
Asin: B0BXWHTXWT
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.[Pre-Soldered]: Save Time And Effort With St Shillehtek Pre-Soldered Adxl345. No Need To Learn How To Solder Or Buy Soldering Equipment..
[Applications]: Well Suited For Mobile Device Applications. It Measures The Static Acceleration Of Gravity In Tilt-Sensing Applications, As Well As Dynamic Acceleration Resulting From Motion Or Shock..
[Interfacing]: Accessible Through Either A Spi Or I2c Interface..
[Flat Finish]: Newly Redesigned, With Special Pins Attached To Sit Flat On A Surface, Greatly Enhancing Your Measurements! Pins Placed For Optimal Performance With Klipper And Other Applications..
Features
- [KLIPPER]: Can be used with Klipper to provide additional sensor data to the firmware, which can help improve the accuracy and precision of the printer's movements.
- [FLAT FINISH]: Newly redesigned, with special pins attached to sit flat on a surface, greatly enhancing your measurements! Pins placed for optimal performance with Klipper and other applications.
- [PRE-SOLDERED]: Save time and effort with ST SHILLEHTEK Pre-Soldered ADXL345. No need to learn how to solder or buy soldering equipment.
- [INTERFACING]: Accessible through either a SPI or I2C interface.
- [APPLICATIONS]: Well suited for mobile device applications. It measures the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion or shock.
- See more on Amazon...
Brand: ST SHILLEHTEK | Manufacturer: Shenzhen Robotlinking
Dimensions: 3.94 x 3.94 x 3.94 inches | Weight: 0.02 Pounds
See On Amazon Similar To SHILLEHTEK ADXL345 PreSoldered 3axis Accelerometer
#1
AOICRIE 3PCS GY-291 ADXL345 3-Axis Digital Acceleration of Gravity Tilt Module with IIC SPI Transmission for Arduino (3PCS)
Asin: B09S633YTW | Ean: 0701715508200 | UPC: 701715508200
☀Communication: It Uses Both I2c And Spi (Supports 3-, 4-Wire Spi) Interface..
☀Ultra Low Power: As Low As 23 Μa In Measurement Mode And 0.1 Μa In Standby Mode At Vs = 2.5 V (Typical)..
☀Widely Applications: Handsets, Medical Instrumentation, Gaming And Pointing Devices, Industrial Instrumentation, Personal Navigation Devices, Hard Disk Drive (Hdd) Protection, Portable Gaming..
☀Multiple Sensing Detect: Activity And Inactivity Sensing Detect The Presence Or Lack Of Motion By Comparing The Acceleration On Any Axis With User-Set Thresholds. Tap Sensing Detects Single And Double Taps In Any Direction. Free Fall Sensing Detects If The Device Is Falling..
Features
- FULL RESOLUTION: where resolution increases with g range, up to 13-bit resolution at 16 g (maintaining 4 mg/LSB scale factor in all g ranges)
- MULTIPLE SENSING DETECT: Activity and inactivity sensing detect the presence or lack of motion by comparing the acceleration on any axis with user-set thresholds. Tap sensing detects single and double taps in any direction. Free fall sensing detects if the device is falling.
- COMMUNICATION: It uses both I2C and SPI (supports 3-, 4-wire SPI) interface.
- WIDELY APPLICATIONS: Handsets, Medical instrumentation, Gaming and pointing devices, Industrial instrumentation, Personal navigation devices, Hard disk drive (HDD) protection, Portable gaming.
- ULTRA LOW POWER: as low as 23 A in measurement mode and 0.1 A in standby mode at VS = 2.5 V (typical).
- See more on Amazon...
Brand: AOICRIE | Manufacturer: AOICRIE
Warranty: 30
See On Amazon #2
ACEIRMC 6pcs GY-291 ADXL345 3-Axis Digital Acceleration of Gravity Tilt Module for Arduino IIC/SPI Transmission
Asin: B08YNR7CVP | Ean: 0701715455214 | UPC: 701715455214
Low-Power Mode Supports Motion-Based Intelligent Power Management For Threshold Sensing And Motion Acceleration Measurement With Very Low Power Consumption..
The Adxl345 Is Perfect For Mobile Device Applications. It Measures Static Gravitational Acceleration In Tilt Detection Applications As Well As Dynamic Acceleration Due To Motion Or Impact..
Its High Resolution (3.9 Mg / Lsb) Enables Measurement Of Tilt Angle Changes Of Less Than 1.0 °.
The Digital Output Data Is In 16-Bit Twos Complement Format And Is Accessible Via Spi (3-Wire Or 4-Wire) Or I2c Digital Interface..
Features
- The ADXL345 is a small, thin, ultra-low power 3-axis accelerometer with high resolution (13 bits) and measurement range of 16g.
- The digital output data is in 16-bit twos complement format and is accessible via SPI (3-wire or 4-wire) or I2C digital interface.
- Low-power mode supports motion-based intelligent power management for threshold sensing and motion acceleration measurement with very low power consumption.
- Its high resolution (3.9 mg / LSB) enables measurement of tilt angle changes of less than 1.0
- The ADXL345 is perfect for mobile device applications. It measures static gravitational acceleration in tilt detection applications as well as dynamic acceleration due to motion or impact.
- See more on Amazon...
Brand: ACEIRMC | Manufacturer: ACEIRMC
See On Amazon #3
Teyleten Robot GY-291 ADXL345 Digital 3-Axis Acceleration of Gravity Tilt Module IIC SPI for Arduino 5pcs
Asin: B08HLP1MPY | Model: D21 | PartNumber: D21 | Ean: 8425529930317
Adxl345 Is Very Suitable For Mobile Device Applications. It Can Be Used For Tilt Sensing Applications While Measuring Static Acceleration Of Gravity, And It Can Also Measure The Speed Of Vibration Caused By Dynamic Added Motion Or Caused. With Its High Resolution (4Mg/Lsb), It Can Measure Changes In The Inclination Angle Of About 0.25°. Use Adxl345 Digital Output Timing Acceleration, Etc., No Timing.
Communication Method: Iic / Spi Communication Protocol.
Up To ±16 G Accelerometer With High Resolution (13) Measurement. Digital Output.
With High Resolution (13 Bits) Measurement Up To ±16G. The Digital Output Data Is In 16-Bit Two-Valued Complement Format, Which Can Be Passed Through The I2c Digital Interface Spi (3-Wire Or 4-Wire).
According To The 16-Bit Two's Complement Format, It Can Be Accessed Through The Digital Interface Spi (3-Wire Or 4-Wire) Or I2c.
Features
- Brand new original ADXL345 chip, quality assurance
- According to the 16-bit two's complement format, it can be accessed through the digital interface SPI (3-wire or 4-wire) or I2C
- ADXL345 is very suitable for mobile device applications. It can be used for tilt sensing applications while measuring static acceleration of gravity, and it can also measure the speed of vibration caused by dynamic added motion or caused. With its high resolution (4mg/LSB), it can measure changes in the inclination angle of about 0.25 . Use ADXL345 digital output timing acceleration, etc., no timing
- With high resolution (13 bits) measurement up to 16g. The digital output data is in 16-bit two-valued complement format, which can be passed through the I2C digital interface SPI (3-wire or 4-wire)
- Communication method: IIC / SPI communication protocol
- Up to 16 g accelerometer with high resolution (13) measurement. Digital output
- See more on Amazon...
Brand: Teyleten Robot | Manufacturer: Teyleten Robot
Dimensions: 0.20 x 0.71 x 0.91 inches
See On Amazon #4
4PCS GY-291 ADXL345 3-Axis Digital Acceleration of Gravity Tilt Sensor Module IIC/SPI Transmission Compatible with Raspberry Pi(Welded)
Asin: B0C7H1KK7K | Ean: 0687117709394 | UPC: 687117709394
Advantages: Save Time And Effort With Pre-Soldered Gy-291 Adxl345 Module. No Need To Learn How To Solder Or Buy Soldering Equipment..
Applications: The Adxl345 Module Is Perfect For Mobile Device Applications. It Measures Static Gravitational Acceleration In Tilt Detection Applications As Well As Dynamic Acceleration Due To Motion Or Impact..
Low-Power Mode Supports Motion-Based Intelligent Power Management For Threshold Sensing And Motion Acceleration Measurement With Very Low Power Consumption..
The Digital Output Data Is In 16-Bit Twos Complement Format And Is Accessible Via Spi (3-Wire Or 4-Wire) Or I2c Digital Interface.Its High Resolution (3.9 Mg / Lsb) Enables Measurement Of Tilt Angle Changes Of Less Than 1.0 °.
Features
- The ADXL345 is a small, thin, ultra-low power 3-axis accelerometer with high resolution (13 bits) and measurement range of 16g.
- The digital output data is in 16-bit twos complement format and is accessible via SPI (3-wire or 4-wire) or I2C digital interface.Its high resolution (3.9 mg / LSB) enables measurement of tilt angle changes of less than 1.0
- Advantages: Save time and effort with Pre-Soldered GY-291 ADXL345 module. No need to learn how to solder or buy soldering equipment.
- Low-power mode supports motion-based intelligent power management for threshold sensing and motion acceleration measurement with very low power consumption.
- Applications: The ADXL345 module is perfect for mobile device applications. It measures static gravitational acceleration in tilt detection applications as well as dynamic acceleration due to motion or impact.
- See more on Amazon...
Brand: AITIAO | Manufacturer: AITIAO
See On Amazon #5
2Pcs GY-291 ADXL345 3-Axis Digital Three-axis Acceleration of Gravity Tilt Inclination Module IIC/SPI Transmission
Asin: B09JK5DP6R | Ean: 0701715489448 | UPC: 701715489448
3-Axis Digital Acceleration High Resolution (4 Mg / Lsb), Capable Of Measuring About 1.0 ° Of Inclination Angle Change, Use Adxl345 Digital Output Acceleration Timing, Etc, Without The Need For Analog To Digital Conversion, Reducing System Cost And Board Space..
Low Power Modes Enable Intelligent Motion-Based Power Management To A Very Low Power Consumption Threshold Sensing And Active Acceleration Measurement..
The Gy-291 Adxl345 Device Offers A Variety Of Special Detection. Activity And Inactivity Sensing Through Comparing Any Axis Acceleration Threshold Set By The User To Detect The Presence Or Absence Of Transport Movable Occurs.Tap Any Direction Sensing Detects Single And Dual Vibration Vibration Make. Free-Fall Detection Can Detect Whether The Device Is Falling. These Ones Function Can Be Mapped To Two Interrupt Output Pins..
Adxl345 Is Well Suited For Mobile Device Applications. It Can Tilt Sensing Applications Measuring The Static Acceleration Of Gravity, It Can Also Measure The Dynamic Add Motion Or Shock Caused Speed..
Features
- ADXL345 is a small, thin, low-power three-axis accelerometer can be high. Up to 16 g accelerometer with high resolution (13) measurements. Digital outputs according to a 16-bit twos complement format, can be accessed through the digital interface SPI (3-wire or 4-wire) or I2C.
- ADXL345 is well suited for mobile device applications. It can tilt sensing applications measuring the static acceleration of gravity, it can also measure the dynamic add motion or shock caused speed.
- 3-Axis digital acceleration high resolution (4 mg / LSB), capable of measuring about 1.0 of inclination angle change, use ADXL345 digital output acceleration timing, etc, without the need for analog to digital conversion, reducing system cost and board space.
- The gy-291 ADXL345 device offers a variety of special detection. Activity and inactivity sensing through comparing any axis acceleration threshold set by the user to detect the presence or absence of transport movable occurs.Tap any direction sensing detects single and dual vibration vibration make. Free-fall detection can detect whether the device is falling. These ones function can be mapped to two interrupt output pins.
- Low power modes enable intelligent motion-based power management to a very low power consumption threshold sensing and active acceleration measurement.
- See more on Amazon...
Brand: DORHEA | Manufacturer: DORHEA
See On Amazon #6
SHILLEHTEK ADXL345 Pre-Soldered 3-axis Digital Angle Acceleration Sensor Module Compatible with Raspberry Pi (Raspberry Pi Pico and Other Models), Arduino | High Resolution Tilt-Sensing Accelerometer
Asin: B0BTN4DCFZ
[Interfacing]: Adxl345 Supports Both I2c And Spi Communication Protocols For Transferring Data To A Microcontroller..
[Efficient Sensor]: Adxl345 Features An Integrated Low-Pass Filter To Eliminate Noise And A Wake-Up Function To Minimize Power Consumption During Inactivity..
[Pre-Soldered]: Save Time And Effort With Pre-Soldered Adxl345. No Need To Learn How To Solder Or Buy Soldering Equipment..
Features
- [KLIPPER COMPATIBILITY]: Unlike other models of ADXL345, this version is not compatible with Klipper Input Shaper out of the box. So please be aware of this! You would need to remove the R4 pull-down resistor.
- [PRE-SOLDERED]: Save time and effort with Pre-Soldered ADXL345. No need to learn how to solder or buy soldering equipment.
- [INTERFACING]: ADXL345 supports both I2C and SPI communication protocols for transferring data to a microcontroller.
- [EFFICIENT SENSOR]: ADXL345 features an integrated low-pass filter to eliminate noise and a wake-up function to minimize power consumption during inactivity.
- See more on Amazon...
Brand: ST SHILLEHTEK | Manufacturer: Shenzhen Robotlinking
See On Amazon #7
AOICRIE 3pcs GY-291 ADXL345 Pre-Soldered 3-Axis Digital Acceleration of Gravity Tilt Sensor Module IIC/SPI Transmission Compatible with Klipper for Raspberry Pi
Asin: B0CH2SG11Q | Ean: 0701715468443 | UPC: 701715468443
【Low Power Consumption】Low-Power Mode Supports Motion-Based Intelligent Power Management For Threshold Sensing And Motion Acceleration Measurement With Very Low Power Consumption..
【Applications】The Adxl345 Is Perfect For Mobile Device Applications. It Measures Static Gravitational Acceleration In Tilt Detection Applications As Well As Dynamic Acceleration Due To Motion Or Impact..
【Pre-Soldered Adxl345 Accelerometer】Save Time And Effort With Pre-Soldered Adxl345. No Need To Learn How To Solder Or Buy Soldering Equipment..
【Adxl345 Interface】The Digital Output Data Is In 16-Bit Twos Complement Format And Is Accessible Via Spi (3-Wire Or 4-Wire) Or I2c Digital Interface.Its High Resolution (3.9 Mg / Lsb) Enables Measurement Of Tilt Angle Changes Of Less Than 1.0 °.
Features
- ADXL345 Sensor Module It's a small, thin, ultra-low power 3-axis accelerometer with high resolution (13 bits) and measurement range of 16g.
- ADXL345 Interface The digital output data is in 16-bit twos complement format and is accessible via SPI (3-wire or 4-wire) or I2C digital interface.Its high resolution (3.9 mg / LSB) enables measurement of tilt angle changes of less than 1.0
- Low Power Consumption Low-power mode supports motion-based intelligent power management for threshold sensing and motion acceleration measurement with very low power consumption.
- Pre-Soldered ADXL345 Accelerometer Save time and effort with Pre-Soldered ADXL345. No need to learn how to solder or buy soldering equipment.
- Applications The ADXL345 is perfect for mobile device applications. It measures static gravitational acceleration in tilt detection applications as well as dynamic acceleration due to motion or impact.
- See more on Amazon...
Brand: AOICRIE | Manufacturer: AOICRIE
See On Amazon #8
WWZMDiB GY-291 ADXL345 Digital 3-Axis Acceleration of Gravity Tilt Module IIC/SPI Transmission for Arduino
Asin: B09YD41VXR | Ean: 0825665533928 | UPC: 825665533928
Brand: Generic | Manufacturer: Generic
See On Amazon #9
5pcs GY-291 ADXL345 3-Axis Digital Acceleration of Gravity Tilt Module IIC/SPI Transmission
Asin: B09Y36QGHB | Ean: 0701715513143 | UPC: 701715513143
【Adxl345 3-Axis Accelerometer Module】This Module Is A Small, Thin, Ultra-Low Power 3-Axis Accelerometer With High Resolution (13-Bit), Measurement At Up To ± 16G.
【Gy-291 Adxl345 Applications】It Can Used In Handsets, Instrumentation, Gaming And Pointing Devices, Industrial Instrumentation, Personal Navigation Devices, Hard Disk Drive (Hdd) Protection, Portable Gaming.
【Exquisite Quality】The Gy-291 Adxl345 3-Axis Digital Acceleration Module Is Perfect For Mobile Device Applications. It Measures Static Gravitational Acceleration In Tilt Detection Applications As Well As Dynamic Acceleration Due To Motion Or Impact.Its High Resolution (3.9 Mg / Lsb) Enables Measurement Of Tilt Angle Changes Of Less Than 1.0 °.
【Adxl345 Power Supply】3-5V; Means Of Communication: The Iic / Spi Communication Protocol.
Features
- Module Model GY-291; Main Chip ADXL345
- ADXL345 Power Supply 3-5V; Means of communication: the iic / spi communication protocol
- ADXL345 3-Axis Accelerometer Module This module is a small, thin, ultra-low power 3-axis accelerometer with high resolution (13-bit), measurement at up to 16g
- Exquisite Quality The GY-291 ADXL345 3-Axis digital acceleration module is perfect for mobile device applications. It measures static gravitational acceleration in tilt detection applications as well as dynamic acceleration due to motion or impact.Its high resolution (3.9 mg / LSB) enables measurement of tilt angle changes of less than 1.0
- GY-291 ADXL345 Applications It can used in handsets, instrumentation, gaming and pointing devices, industrial instrumentation, personal navigation devices, hard disk drive (HDD) protection, portable gaming
- See more on Amazon...
Brand: Coliao | Manufacturer: Coliao
See On Amazon #10
LM YN ADXL345 Digital 3-Axis Acceleration Gravity Tilt Sensor Module IIC SPI 3V to 5V
Asin: B072C99YL5 | Model: ADXL345 | PartNumber: ADXL345 | Ean: 0612957707132 | UPC: 612957707132
Adxl345 Is A Small, Thin, Low-Power 3-Axis Accelerometer With High Resolution (13-Bit) Measurement At Up To 16G..
Size: 14Mm * 19Mm..
The Device Offers A Variety Of Special Detection. Activity And Inactivity Sensing Detect Whether The Motion Occurs, And The Acceleration On Any Axis Exceeds The Limits Set By The User. Tap Detection Function Can Detect And Double-Click Action. Free-Fall Detection Can Detect Whether The Device Is Falling. These Functions Can Be Mapped To Two Interrupt Output Pins A. 32 First In First Out (Fifo) Buffer Can Be Used To Store Data To Minimize Host Processor Intervention..
Digital Output Data Is 16-Bit Twos Complement Format, Via Spi (3-Wire Or 4-Wire) Or I2c Digital Access Interface..
Features
- ADXL345 is well suited for mobile device applications. Can measure the static acceleration of gravity in tilt-sensing applications, it can also measure both dynamic acceleration resulting from motion or shock. Its high resolution (4 mg / LSB), capable of measuring the angle of inclination changes less than 1.0 .
- Digital output data is 16-bit twos complement format, via SPI (3-wire or 4-wire) or I2C digital access interface.
- ADXL345 is a small, thin, low-power 3-axis accelerometer with high resolution (13-bit) measurement at up to 16g.
- The device offers a variety of special detection. Activity and inactivity sensing detect whether the motion occurs, and the acceleration on any axis exceeds the limits set by the user. Tap detection function can detect and double-click action. Free-fall detection can detect whether the device is falling. These functions can be mapped to two interrupt output pins a. 32 First In First Out (FIFO) buffer can be used to store data to minimize host processor intervention.
- Size: 14mm * 19mm.
- See more on Amazon...
Brand: LM YN | Manufacturer: LM YN
Dimensions: 0.04 x 0.20 x 0.16 inches | Weight: 0.04 Pounds
See On Amazon
Looking For Something Else?
Search