FYSETC 3D Printer Accessories Vorn 2.4 Upgraded Klicky PCB Probe Kit Z Auto Leveling Fastener Screws Nut Set Compatible with Vorn 2.4 Triden 3D Printers
Asin: B0BYCHZKXD
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Wide Compatibility: Suitable For All Kinds Of Volcan Series Hotend, Such As V6 Drago Hot End. Continue To Use The First Two Leveling Specifications, Withstand 5V, And The Rebound Force Of Pressing Slightly Larger Than Other Series, Which Is More Accurate. Sharing From Real Experience: Be Able To Gain In Precision With These Parts (Going From A Tolerance Of 0,0075Mm To A Tolerance Below 0,0020Mm)..
Package Listing: 3 * Pcb Boards,10 * 3X6mm Maglets, 10* M3 Brass Threaded Inserts And Screws(All That Shown In The Picture), Neatly Packed With A Customized Box..
High Quality: The Accessories Of Klicky Pcb Probe Kit Uses High Quality Raw Materials, High Hardness And Corrosion Resistance..
N.B.: The Kit Does Not Include The Printed Part. Need More Information And Support, Please Search It On Github Dot(.) Com: Tanaes/Whopping_Voron_Mods/Tree/Main/Pcb_Klicky..
Features
- Feature: Based on the two orignal legends: the Klicky Probe by JosAr and the EuclidProbe, this new PCB design attempts to replicate as closely as possible to try and achieve the aims: Reduce the problem of maglets working lose or seating poorly in printed parts; Increase the current being switched, which might possibly result in a longer switch lifetime; Add LEDs.
- N.B.: The kit does Not include the printed part. Need more information and support, please search it on github dot(.) com: tanaes/whopping_Voron_mods/tree/main/pcb_klicky.
- Wide compatibility: Suitable for all kinds of volcan series hotend, such as V6 Drago Hot End. Continue to use the first two leveling specifications, withstand 5V, and the rebound force of pressing slightly larger than other series, which is more accurate. Sharing from real experience: Be able to gain in precision with these parts (going from a tolerance of 0,0075mm to a tolerance below 0,0020mm).
- High Quality: The accessories of Klicky PCB Probe kit uses high quality raw materials, high hardness and corrosion resistance.
- Package listing: 3 * PCB boards,10 * 3x6mm maglets, 10* M3 brass threaded inserts and screws(all that shown in the picture), neatly packed with a customized box.
- See more on Amazon...
Brand: FYSETC | Manufacturer: fuyuansheng
See On Amazon Similar To FYSETC 3D Printer Accessories Vorn
#1
Comgrow 25PCS MK8 Ender 3 V2 Nozzles 0.4MM, 3D Printer Brass Hotend Nozzles with DIY Tools Storage Box for Creality Ender 3/Ender 3 Pro/Ender 3 Max/5 Pro/Ender 3 S1/Ender 3 Neo/CR 10 Series 3D Printer
Asin: B0B9LYZSKC
Strong Practicability - Storage Box For Easy Carrying And Storage Of Small Accessories.The Nozzle Cleaning Needle Is Made Of High-Quality Stainless Steel With Good Toughness And Is Not Easy To Break, And The Nozzle Can Be Cleaned From Multiple Angles.The Hexagon Wrench Makes The Adjustment Of The Nozzle Easier..
Wide Compatibility - Suitable For Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max/Ender 5 Pro/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo And Cr 10 Series 3D Printers.Compatible With All 1.75Mm Pla Abs Filament 3D Printers..
High Precision - Input Diameter 1.75Mm, Smooth Inner Wall, Extruder Nozzle Diameter Error Less Than 0.02 Mm.Greatly Reduces The Risk Of Print Head Leaks And Avoids Nozzle Clogging..
Package List - The 3D Printer Extruder Nozzles Come With 0.4 Mm Brass Nozzles*25, Nozzle Cleaning Needles*10, Hexagon Wrench*1, Stainless Steel Tweezers*1, And A Storage Box..
Features
- Premium Quality - 25 PCs high-quality brass nozzles, good abrasion resistance, heat resistance, and corrosion resistance.It is convenient for you to replace them in time to achieve high-quality printing.
- Package List - The 3D printer extruder nozzles come with 0.4 mm brass nozzles*25, nozzle cleaning needles*10, hexagon wrench*1, stainless steel tweezers*1, and a storage box.
- Strong Practicability - Storage box for easy carrying and storage of small accessories.The nozzle cleaning needle is made of high-quality stainless steel with good toughness and is not easy to break, and the nozzle can be cleaned from multiple angles.The hexagon wrench makes the adjustment of the nozzle easier.
- High Precision - Input diameter 1.75mm, smooth inner wall, extruder nozzle diameter error less than 0.02 mm.Greatly reduces the risk of print head leaks and avoids nozzle clogging.
- Wide Compatibility - Suitable for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max/Ender 5 Pro/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo and CR 10 Series 3D printers.Compatible with all 1.75mm PLA ABS filament 3D printers.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #2
FYSETC 3D Printer Belt 5 Meters/ 16.4 Ft Length 2GT 6mm Timing Belt 2mm Pitch 6mm Width Rubber Fiberglass Reinforced for Ender V2 3 Pro Ender 5 CR-10 10S Ane A8 CNC SV01 Other 3D Printers
Asin: B07BRKZGMS | Model: US-5M Open Belt | PartNumber: US-5M Open Belt | Ean: 0711102059789 | UPC: 711102059789
3.Wide Range Of Applications: Widely Used In Diy 3D Printers Rebuild, Such As Ender 3S 5 Plus Et5x K1c V3 Se Odin F3 Fl Sun Qqs Pro Deltaa Laser Engraver Master 2 Pro S2 Glowforg Cr-6 Se, Vorn 2.4 V0 Corexy Series, Prus Mk2 Mk3s Mk4 Xl P1p P1s X1 Neptune3 Pro 4 Kobra2 Neo, Sv06 Sv07 Milling Machines, Gear Forming Machines, Drilling Machines, Cnc Lathes, Hobbing Machines, Dishwashers, Packaging Machinery, Motorcycles, Robotic Projects, Dryer, Food Machinery And Other Mechanical Transmissions..
5. Long Service Life: Wear Resistant. Anti-Wear Nylon Tooth Surface For Better Protection Of The Tooth Joint And Extended Service Life..
4. Material: Rubber,Width:6Mm, Model: 2Gt, Length: 5Meters/16.4Ft/196.8Inch, More Than Enough For Many Repairs, And Can Be Easily Cut Into The Size You Want. This Replacement Was The Perfect Amount To Replace Both The X And Y Axis Belts..
2.6Mm Timing Belt - Upgrade Anti-Slip Version: The Tooth Surface Of The Belt Is Made Up Of Specially Treated Tooth Cloth. Arc Tooth Minimizes The Chance Of The Belt Slipping, Runs Quieter. Nice Smooth Movements. Easy To Install, Use Copper Buckles To Crimp On The Ends Of This Toothed Belt Or Use Small Zip Ties To Tighten It In 3D Printing Project..
Features
- 1. A must have spare accessories for stock or original replacement belt: Stable Transmission: 5M Rubber Opening Synchronize Timing belt, a good replacement. High precision. High-strength structural design, anti-extension, anti-jumping, make the transmission more stable.
- 2.6mm Timing Belt - Upgrade Anti-slip Version: The tooth surface of the belt is made up of specially treated tooth cloth. Arc tooth minimizes the chance of the belt slipping, runs quieter. Nice smooth movements. Easy to install, use copper buckles to crimp on the ends of this toothed belt or use small zip ties to tighten it in 3D Printing project.
- 3.Wide range of applications: Widely used in DIY 3D printers rebuild, such as ender 3s 5 plus ET5X k1c v3 se odin f3 FL Sun qqs pro Deltaa Laser engraver master 2 Pro S2 Glowforg CR-6 SE, Vorn 2.4 v0 CoreXY Series, Prus MK2 MK3S MK4 XL P1P P1S X1 Neptune3 Pro 4 kobra2 neo, SV06 SV07 milling machines, gear forming machines, drilling machines, CNC lathes, hobbing machines, dishwashers, packaging machinery, motorcycles, robotic projects, dryer, food machinery and other mechanical transmissions.
- 4. Material: Rubber,Width:6mm, Model: 2GT, Length: 5Meters/16.4Ft/196.8inch, More than enough for many repairs, and can be easily cut into the size you want. This replacement was the perfect amount to replace both the X and Y Axis belts.
- 5. Long Service Life: Wear resistant. Anti-wear nylon tooth surface for better protection of the tooth joint and extended service life.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
Dimensions: 0.08 x 1.97 x 0.24 inches
See On Amazon #3
FYSETC Prusa 3D Printer Accessory - MK4 Heater Block Silicone Sock: Easy Install Hotend Part Insulate Protect Hot End Nozzle Print Head Silicone Cover Compatible with Prusa MK3.9 XL - Black, Pack of 4
Asin: B0CT7GDT17
3. Package Contents: Nice Set Of Silicone Covers To Keep Your Blocks Clean. Easy Installation, Just Slip It On. It's A Must-Have To Keep A Few Extra Covers At Hand When You Don't Just Have A Single Nozzle/Block. It's Easier To Keep Your Mk4 Nozzles Paired With A Block, Thermistor, And Heater For Faster Changes. Of Course, That Includes These Silicone Covers. It Keeps Heat Block From Further Messes. Maintain The Hotend Temperature Stable And Provides Protection From Failed 3D Printing Projects..
5.High Temperature Resistance For 3D Printer Material: With This Sock You Can Safely Print More Exotic Materials Such As Petg At Higher Temperatures While Also Using The Cooling Fans At Full Speed. Actively Keeping The Hotend Very Hot And Cooling The Petg Much Quicker Before It Is Laid Onto The Hotbed Can Help With Success Rates On More Prints..
4.Upgraded Material:3D Printer Hotend Silicone Sock Is Made Of Heat-Resistant, Non-Stick Silicone Material, Injection Molded With Temperature Resistance Up To 280°C/536℉. Good For Keeping The Hot End Clean And Temperature Stable..
2. Easy To Install And Remove: Drop-In Replacement For The Original Sock. They Go On Just As Easily As The Oem Ones Do, Help Keep Your Heater Block Clean And Repel Plastic Of Burnt, Blackened, And Filament Build-Up, Reduce Your Repair Times, Then Extend The Life Of The Heat Block And Nozzle, Even The Whole Hot End. Make Sure To Enable The "Nextruder Silicone Sock" Option Under "Settings->Hardware", Otherwise You Might See Issues With It Not Retracting Enough To Prevent Crashing Into Your Print..
Features
- 1. Good Nozzle cover for MK4 Hot End: The Heater Block Silicone Sock is compatible with Prusa MK4 - MK3.9 - XL 3D Printer. These fit snugly, do not warp under heat and work well. Note: NOT for Prusa MK3S MK3 MK2.5S MK2.5 MK2S MMU2S CW1 SL1 MINI MK3S+ MINI+ SL1S CW1S MK2 MMU2 MMU1 MMU3 Hotend. A perfect diy 3d printer part for MK4 all-metal high-precision nozzle with an all-metal filament guide (no PTFE tubes anywhere).
- 2. Easy to install and remove: Drop-in Replacement for the original sock. They go on just as easily as the OEM ones do, Help keep your heater block clean and repel plastic of burnt, blackened, and filament build-up, reduce your repair times, then extend the life of the heat block and nozzle, even the whole hot end. Make sure to enable the Nextruder Silicone Sock option under Settings->Hardware, otherwise you might see issues with it not retracting enough to prevent crashing into your print.
- 3. Package Contents: Nice set of silicone covers to keep your blocks clean. Easy Installation, just slip it on. It's a must-have to keep a few extra covers at hand when you don't just have a single nozzle/block. It's easier to keep your MK4 nozzles paired with a block, thermistor, and heater for faster changes. Of course, that includes these silicone covers. It keeps heat block from further messes. Maintain the hotend temperature stable and provides protection from failed 3d printing projects.
- 4.Upgraded Material:3D Printer Hotend Silicone Sock is made of heat-resistant, non-stick silicone material, Injection molded with temperature resistance up to 280 C/536 . Good for keeping the hot end clean and temperature stable.
- 5.High temperature Resistance for 3d printer material: With this sock you can safely print more exotic materials such as PETG at higher temperatures while also using the cooling fans at full speed. Actively keeping the hotend very hot and cooling the PETG much quicker before it is laid onto the hotbed can help with success rates on more prints.
- See more on Amazon...
Brand: FYSETC | Manufacturer: fuyuansheng
Dimensions: 0.95 x 0.61 x 0.63 inches
See On Amazon #4
FYSETC 3D Printer Accessories - Prusa i3 MK4 Nextruder Heaterblock - Aluminium Block for The Hotend: High Temperature Heating Block Clone for MK4 MK3.9 XL Project Replacement Stock Extruder Part
Asin: B0CP1M55JB
Material: Aluminum, Not Copper. High Temperature, High Precision, Stable Performance..
Other Mk4 Clone Parts Will Be Back, Like Heater Cartridge Heatbed Thermistor Kit Nozzle Ir Sensor Etc, If Needed, Please Email Us..
Easy Of Use: The Clone Nextruder Heater Block Was Easily Completed With Heating Element, Temperature Sensor, Nozzle Adapter Heatbreak And Steel Nozzle 0.4, Can Directly Install..
Package Include: Only A Aluminum Heating Block And Enclosed M3 Stud Bolts, But Not Come With A Silicone Sock..
Features
- Spare must parts for DIY your FDM 3D printing project or MK4 Hot End Original repair Part: This is a clone alluminium block for the Hotend assembly dedicated for printers using Nextruder. The extruder heater block was easily completed with heating element, temperature sensor, nozzle adapter and steel nozzle 0.4. The enclosed M3 stud bolts have a Torx drive (TX6) not HEX, so you must use the right tool.
- Package include: only a aluminum heating block and Enclosed M3 Stud Bolts, but not come with a silicone sock.
- Material: Aluminum, not copper. High Temperature, high precision, stable performance.
- Easy of use: The clone nextruder heater block was easily completed with heating element, temperature sensor, nozzle adapter heatbreak and steel nozzle 0.4, can directly install.
- Other MK4 clone parts will be back, like heater cartridge heatbed thermistor kit nozzle ir sensor etc, if needed, please email us.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #5
FYSETC 3D Printer Part Prusa i3 MK3S+ Print Fan Hotend Replacement Fan 4010 5015 Fan DC 5V MK3S Blower Fan Extruder Cooling Radiator for 3D Printer MK3 Hot End DIY Accessory
Asin: B07NTKXVN8
Rated Voltage: 5015 Printing Fan Dc 5V, 0.35A 5800Rmp; 4010 Cooling Fan Dc 5V, 0.2A, 6800Rmp..
After Sales Guarantee: Each One Defective Item Can Have The Free Replace Or Refund, Need More Help Please Feel Free To Contact Us, We Will Try Our Best To Assist You..
Please Note: The Fan Has Two Sides,But The Side With Sticker Must Be Always Facing The Hotend (Not Visible When The Fan Is Mounted).Otherwise,The Cooling Won't Work Properly..
Size: About 50X50x15mm/ 1.9X1.9X0.59 Inch; 40X40x10mm/ 1.7X1.7X0.39 Inch; Cable Length: About 750Mm/ 29.5 Inch.
Features
- Brushless DC Blower Fan, best DIY replacement extruder hotend parts for Prus i3 MK3 MK3S MK3S+.
- Size: About 50x50x15mm/ 1.9x1.9x0.59 inch; 40x40x10mm/ 1.7x1.7x0.39 inch; Cable Length: about 750mm/ 29.5 inch
- Rated Voltage: 5015 Printing fan DC 5V, 0.35A 5800rmp; 4010 Cooling fan DC 5V, 0.2A, 6800rmp.
- Please Note: the fan has two sides,but the side with sticker must be always facing the hotend (not visible when the fan is mounted).Otherwise,the cooling won't work properly.
- After Sales Guarantee: each one defective item can have the free replace or refund, need more help please feel free to contact us, we will try our best to assist you.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #6
XIFOWE MK8 Nozzles 25 pcs 0.4mm 3D Printer Extruders Brass Nozzles CR-10 Nozzle with DIY Tools and A Ten-Grid Parts Box for CR-8 / CR-10 / Ender 3 / Ender 3S / 5/6 and so on
Asin: B0969LR9GY | Model: NZ-0.4 | PartNumber: NZ-0.4 | Ean: 0717288479168 | UPC: 717288479168
【Convenient】✔Easy To Install, Easy To Use, No Processing, High Precision, Low Cost Diy Engraving Machine, 3D Printer Preferred. Designed In Smooth Feeding Chamfer With A Perfect Round Aperture. It Significantly Reduces Frictional Resistance On The Feed And Makes The Feeding Process Smoother..
【Universal】✔Suitable For 3D Printer Mk8 A6 A8, Compatible With Cr-10, Cr-10Mini, Cr-6, Cr-10S, Mk8 I3, Ender 2, Ender 3, Ender 5 And Ender 6, Compatible With Most 1.75Mm 3D Printer..
【What You Receive】✔25Pcs (0.4Mm) Printer Nozzles. 10 Pcs Stainless Steel Needles. A Ten-Grid Parts Box. A 6Mm Inner Hexagon Wrench..
【Dimension】✔Input Diameter: 2.00Mm; Output Diameter: 0.4 Mm; Out Thread: M6; Thread Length: 5Mm; The Outer Surface Is Marked With A Size, You Can Easily Identify The Specifications Of The Nozzle..
Features
- Material High quality brass. It has good thermal conductivity and high wear resistance, reducing oxidation reactions at high temperatures and achieving excellent printing results.
- Dimension Input diameter: 2.00mm; Output diameter: 0.4 mm; Out thread: M6; Thread length: 5mm; The outer surface is marked with a size, You can easily identify the specifications of the nozzle.
- Convenient Easy to install, easy to use, no processing, high precision, low cost DIY engraving machine, 3D printer preferred. Designed in smooth feeding chamfer with a perfect round aperture. It significantly reduces frictional resistance on the feed and makes the feeding process smoother.
- What you receive 25pcs (0.4mm) Printer Nozzles. 10 pcs stainless steel needles. A Ten-Grid Parts Box. A 6MM inner hexagon wrench.
- Universal Suitable for 3D Printer MK8 A6 A8, Compatible with CR-10, CR-10mini, CR-6, CR-10S, MK8 I3, Ender 2, Ender 3, Ender 5 and Ender 6, Compatible with most 1.75mm 3D printer.
- See more on Amazon...
Brand: XIFOWE | Manufacturer: XIFOWE
Weight: 0.00 Pounds
See On Amazon #7
Anycubic 3D Printer Nozzle 0.4 mm/ 1.75 mm 3D Printer High Temperature Wear Resistant Compatible with Anycubic Kobra 2 Series (5 Pcs)
Asin: B0C4Y74KC2
Features
- Anycubic 3D Printer Nozzle 0.4 mm/ 1.75 mm 3D Printer High Temperature Wear Resistant Compatible with Anycubic Kobra 2
- See more on Amazon...
Brand: ANYCUBIC | Manufacturer: ANYCUBIC
Dimensions: 1.00 x 1.90 x 1.90 Inches | Weight: 0.25 Kilograms
See On Amazon #8
3D Printer Parts, FYSETC 10 Meters (33ft) 2GT Timing Belt 6mm Open Belt Pitch 2mm Width 6mm Rubber Fiberglass Fit for Ender 3 CR-10 Series RepRap Prus Mendel Rostock CNC Machine - Black
Asin: B07CDDPCM8 | Model: 10M Belt | PartNumber: 10M Belt | Ean: 0711102059802 | UPC: 711102059802
Wide Range Of Applications: Widely Used In 3D Printers, Such As Ender 5 Plus, Vorn Series, Prus Mk3s, Anycubi Vyperr, Milling Machines, Gear Forming Machines, Drilling Machines, Cnc Lathes, Hobbing Machines, Dishwashers, Packaging Machinery, Motorcycles, Automobile, Dryer, Food Machinery, Any Diode Laser, And Other Mechanical Transmissions..
Long Service Life: Wear Resistant. Anti-Wear Nylon Tooth Surface For Better Protection Of The Tooth Joint And Extended Service Life..
Length: About 10 Meters/33Ft (393.7 Inch), Pitch: 2Mm; Width: 6Mm. It Can Be Easily Cut Into The Size You Want, A Good Replacement..
Upgrade Anti-Slip Version: The Tooth Surface Of The Belt Is Made Up Of Specially Treated Tooth Cloth. Arc Tooth Minimizes The Chance Of The Belt Slipping, Runs Quieter. Nice Smooth Movements..
Features
- Model Number: 10M Rubber Opening Timing belt, 3d printer accessories.
- Upgrade Anti-slip Version: The tooth surface of the belt is made up of specially treated tooth cloth. Arc tooth minimizes the chance of the belt slipping, runs quieter. Nice smooth movements.
- Wide range of applications: Widely used in 3D printers, such as ender 5 plus, Vorn Series, Prus MK3S, Anycubi Vyperr, milling machines, gear forming machines, drilling machines, CNC lathes, hobbing machines, dishwashers, packaging machinery, motorcycles, automobile, dryer, food machinery, any diode laser, and other mechanical transmissions.
- Length: about 10 meters/33ft (393.7 inch), Pitch: 2mm; Width: 6mm. It can be easily cut into the size you want, a good replacement.
- Long Service Life: Wear resistant. Anti-wear nylon tooth surface for better protection of the tooth joint and extended service life.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
Dimensions: 0.08 x 5.12 x 0.24 inches
See On Amazon #9
FYSETC 3D Printer Voron0.2 Mini Stealthburne RGB Sequins: 4X Boards Nozzle Lighting Kit for Voron0.2 Mini SB Toolhead Extruder with 1M 26AWG PTFE Wire 3D Printer Accessory
Asin: B0CL76NDGF
【Easy To Use】Cut The Led Board Along The Dotted Line. Solder The Wires To The V/G. Thread The Led Board's Wires Through The Appropriate Slots And Tighten Them. Klipperr Config: Color_Order: Grb. For White Color You Just Need To Set At Max Values The Green Color, Red And Blue..
【Durable Cable】Use Upgraded Ptfe Cable Instead Of Conventional Cable. More Durable, More Reliable. Non-Flammable And Resistant To Acids, Alkalis, Solvents, Oil And Petrol..
【Exquisite Quality】10Mm X 4Mm Small Pcb Board, Ws2812 3535 Bright Rgb Led, 4 Leds In A Set..
【Application】Work With 3D Printer Voronv0 0.2 Mini Stealthburne Sb Toolhead And Other Printers That Use Mini Sb Extruder. This Led Lighting Kit Serves Two Primary Functions: Enhancing The Machine's Visual Appeal And Providing Better Visibility Of Print Quality During Nighttime..
Features
- Product Name New Vorn 0.2 Hotend Part - RGB Sequins, 4 LEDS in a set, comes with 1M / 39.3inch 26AWG PTFE Connecting Wire.
- Application Work with 3D Printer VoronV0 0.2 Mini Stealthburne SB Toolhead and other printers that use mini SB Extruder. This LED Lighting Kit serves two primary functions: enhancing the machine's visual appeal and providing better visibility of print quality during nighttime.
- Easy to Use Cut the LED board along the dotted line. Solder the wires to the V/G. Thread the LED board's wires through the appropriate slots and tighten them. Klipperr Config: color_order: GRB. For white color you just need to set at max values the green color, red and blue.
- Exquisite Quality 10mm x 4mm small pcb board, WS2812 3535 Bright RGB LED, 4 LEDS in a set.
- Durable Cable Use upgraded PTFE cable instead of conventional cable. More durable, more reliable. Non-flammable and resistant to acids, alkalis, solvents, oil and petrol.
- See more on Amazon...
Brand: FYSETC | Manufacturer: fuyuansheng
See On Amazon #10
FYSETC 3D Printer Heatbed Parts, Solid Bed Mounts, OD 0.63 in ID 0.16 in Stable Hotbed Tool Heat-Resistant Silicone Buffer for CR-10 Ender 3 Bottom Connect, 4 Pcs
Asin: B07MH4JQB8
These Silicone Buffers Serve To Replace On Your Heating Bed Original Springs And It Is No Longer Possible Movement, Your Set Levels Remain! Easy To Instal, Screw It With Aluminum Hand Twist Leveling Nuts To Keep The Glass Bed Or Build Plate Level..
New Upgraded 3D Printing Leveling Tool With Two Different Colors:Brown / Black(Asin: B07m66kjnx) To Choose. For Cr10 Max/ Cr10 V2/ S4/ S5/ Sv01, You Need To Choose This Style: 3*25Mm+1*23Mm (Asin : B087jkw7sf At Our Store)..
This Heat-Resistant And Pressure-Resistant Silicone Leveling Column With A 4Mm Inner Diameter Makes It Easier To Level Your 3D Printer..
Model Is 3 High And 1 Short, Brown(Don't Include Print Firmware). The Short One Is For The Rear Left Corner On The Ender 3'S. Please Note: Before Install, You Need To Print Two Firmware( Please Search "3742788" In Thingiverse To Have It), Automatic Leveling Sensor Is Need. Please Reference Picture.Print Firmware Install Position: The Side Has Power Cable. If For Ender 3 S1 Pro, Please Search 4*18Mm At Our Store ( Asin:B07mkqgqjw -Brown, Asin: B07mr7q986 -Black)..
Features
- These are solid bed mounts for the CR-10(NOT for CR10s), Ender 3/ Ender 3 Pro/ Ender 3 V2(not for Ender 3 S1 or Ender 3 S1 Pro which needs 4*18mm, Ender 6). They are intended to replace the springs under the heated bed. two firmware are needed. Ender 3 has contained the spacers, so you don't need to print the necessary parts, you just need to adjust the limit switch module's height, If your printer is CR-10, need to print the necessary parts, reference files in thingiverse, keywords: CR-10 Solid Bed Mount.
- Model is 3 high and 1 short, brown(don't include Print firmware). The short one is for the rear left corner on the ender 3's. Please Note: before install, you need to print two firmware( please search 3742788 in Thingiverse to have it), Automatic leveling sensor is need. Please reference Picture.Print firmware Install position: the side has power cable. If for Ender 3 S1 Pro, please search 4*18mm at our store ( Asin:B07MKQGQJW -Brown, Asin: B07MR7Q986 -Black).
- These silicone buffers serve to replace on your heating bed original springs and it is no longer possible movement, your set levels remain! Easy to instal, screw it with aluminum hand twist leveling nuts to keep the glass bed or build plate level.
- This heat-resistant and pressure-resistant silicone leveling column with a 4mm inner diameter makes it easier to level your 3D printer.
- New upgraded 3d printing leveling tool with two different colors:Brown / Black(Asin: B07M66KJNX) to choose. For CR10 MAX/ CR10 V2/ S4/ S5/ SV01, you need to choose this style: 3*25mm+1*23mm (ASIN : B087JKW7SF at our store).
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #11
FYSETC Prusa i3 MK3S+3D Printer Part Tool Kit Model Cleaning Scarper Modify Finishing: 8pcs Soldering Iron Tips + 1PC Connector Solder Welding Replacement Tip for T18 ST FX888D FX600 WLC100 Iron
Asin: B0CC91VL6M
Easy To Change: It Is Very Easy To Change The Tip Head, It Is No Need To Take Off The Whole Soldering Tip,Just Screw Off The Tip Head From The Connector And Srew On A New One..
High Quality: Made Of Pure Copper Core, Good Thermal Conductivity And Heat Resistance. Each One Is Electroplated For 72 Hour, Advanced Production Process, Not Easily Oxidized..
Wide Compatibility: Perfect Replacement Tips To Fit Fx-888D Fx-888 Fx-8801 Fx-600 Tools, Welle Wlc100 Wp25 Wp30 Wp35 Spg40 Sp40n,Sp40nus,Sp40nkus, 937 936 Soldering Irons.
Multiple-Use: Multi-Style Modify Deburring Tool, Meet Your Diverse Needs, A Good Helper To Delicately Trim Your 3D Filament Printing Part, Such As Pla, Petg, Abs, Tpu On 3D Printer Prusa I3 Mk52 Mk3 Mk3s Mk3s+ Mk4, Voron2.4 R2 Trident3d Voron0.2 Pro. Neptunpro Plus Kobra2max Pro Vyperr Qq-S Q5 Etc. Most Important, It Won't Ruin Or Contaminate Your Parts..
Features
- A must-have 3D Printing Tool Kit: 8pcs pack 1/6" ST tips consist of 2 Conical tips, 1 round tips, 1 Chisel tip, 1 Hook tip, 1 Spoon tip, 1 Shovel tip, 1 Star tip and 1pc 1/4" soldering iron adapter. It is for general soldering applications, spot, line and drag soldering,tinning work.
- Multiple-Use: multi-style modify deburring tool, meet your diverse needs, a good helper to delicately trim your 3d filament printing part, such as PLA, PETG, ABS, TPU on 3d printer Prusa i3 MK52 MK3 MK3S MK3S+ MK4, Voron2.4 R2 Trident3D Voron0.2 Pro. NeptunPro Plus Kobra2Max Pro Vyperr qq-s q5 etc. Most important, it won't ruin or contaminate your parts.
- Easy to Change: It is very easy to change the tip head, it is no need to take off the whole soldering tip,just screw off the tip head from the connector and srew on a new one.
- Wide Compatibility: Perfect Replacement tips to fit FX-888D FX-888 FX-8801 FX-600 tools, Welle wlc100 wp25 wp30 wp35 spg40 sp40n,sp40nus,sp40nkus, 937 936 soldering irons
- High Quality: Made of pure copper core, good thermal conductivity and heat resistance. Each one is electroplated for 72 hour, advanced production process, not easily oxidized.
- See more on Amazon...
Brand: FYSETC | Manufacturer: fuyuansheng
See On Amazon #12
FYSETC 3D Printer Vorn 2.4 Stepper Motor Extension Cables 2PCS : XH2.54-4P 2M/78.7inch Female 4P to Male 4P Motor Extension Wire White Terminal Connector Cable for Voro 2.4 3D Printer Accessories
Asin: B098J4MM3G
Cable Length:2M/78.7Inch, High Quality And Durable, Lightweight For Portable Installation..
After Sales Guarantee: Each One Desfective Item Can Have The Free Replace Or Refund, Need More Help Please Feel Free To Email Or Qa Us, We Will Try Our Best To Serve You..
Package Includes: 2 X 2M Stepper Cables, Female 4 Pin To Male 4 Pin,Xh2.54..
Specially Designed For Vorn 2.4 3D Printer Stepper Motor, Extended Motor Cables, Convenient. Not Suitable For Other Kind Printers..
Features
- PTFE XH2.54 4 Pin to 4Pin stepping motor cable, Length 2m. For the momnet it's compatible with Voron2.4 3D printers Only, printing quality improved, high working stability, long time printing without interruption. Please double check your stock cable before ordering to avoid wrong buy.
- Specially designed for Vorn 2.4 3D printer stepper motor, extended motor cables, convenient. Not suitable for other kind printers.
- Cable length:2M/78.7inch, high quality and durable, lightweight for portable installation.
- Package includes: 2 x 2M stepper cables, Female 4 Pin to Male 4 Pin,XH2.54.
- After Sales Guarantee: each one desfective item can have the free replace or refund, need more help please feel free to email or QA us, we will try our best to serve you.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #13
FYSETC CNC All Metal Sherpa Mini Extruder Light Weight Kit with 36 Moons Motor High Temperature Resistance Machined Part Compatible with Voron2.4 Ender-3 V2 CR-10 S Ender-2 Prusai3 FDM 3D Printers
Asin: B0C3QGKQY6
Kindly Note: Modify E-Axis Step Value Of The Extruder, For Example: The E-Axis Step Value Of Ender3 Is 870. (1) The Max Driving Current Is 1A, Recommend To Use At About 0.8A To Prevent Motor From Overheating. (2) For Marlinfirmware With 36 Motor(8 Teeth), Modify The Extruder Pulse==Method 1: Modify Pulse By Firmware: #Define Default_Axis_Steps_Per_Unit { 80, 80, 400, 870 }. Method 2: Send G Code (Sent By Slicing Software Command): M92 E870 M500. If Motor(10 Teeth), Change Pulse Value: 691..
Applicable Models: Voron2.4 Series, Cr-10, Cr10s, Cr-10 4S, Cr-10 5S, Cr-10 Mini, Cr-20, Ender-2, Ender-3, Ender-3 Pro, Ender-3 V2 , Gasherbrumk3, Prusai3 Mk3 Mk3s+ Etc. It Fits Almost All Fdm 3D Printers If You Can Design The Mounting Bracket..
Features: Moons 36 Motor With 8 Tooth Gear, Good Thermal Control Ability, Large Torque; High-Quality Harden Steel Helical Gears With Nano-Coating, Wear-Resistant, Good Precision And Long Life; Insert A Metal Joint For Telfo Tube, Which Can Be Adapted To More Models No Mater Short-Range Or Long-Range Distance..
Integrated Design For Filament 1.75Mm: If Can't Get The 3D Printing Material To Go Through Smoothly, Sharp The Tip Of Filament With A Cutter Plier And Appropriately Loosen The Arm Knob. Use Metal Joint To Replace The Original Pneumatic Connector Clip, Beautiful Appearance, Just Press The Joint To Pull Filament Out. About The Adapter Mount Stls Files, Please Search Thing:4807684 (For Ender 3, Cr10), Thing: 6055920 (For Vorn Stealthburner/Afterburner Extruder) On Thingivese And Print By Yourself..
Features
- Model Name: CNC All Metal SherpaMini Extruder with Brand 36mm Pancake motor. High-quality 3d printer accessories, good strength, not easy to deform, light weight design, less inertia compared with the oridinary plastic one. Higher precision and higher temperature resistance. Compact body, Powderful Output. All parts are in a package, a full complete kit. If any questions about our product, please feel free to send us messages via your order ID, thank you!
- Integrated Design for filament 1.75mm: If can't get the 3d printing material to go through smoothly, sharp the tip of filament with a cutter plier and appropriately loosen the arm knob. Use metal joint to replace the original pneumatic connector clip, beautiful appearance, just press the joint to pull filament out. About the adapter mount STLs files, please search Thing:4807684 (For Ender 3, CR10), Thing: 6055920 (For Vorn Stealthburner/Afterburner extruder) on thingivese and print by yourself.
- Kindly Note: Modify E-axis step value of the extruder, for example: the E-axis step value of Ender3 is 870. (1) The Max driving Current is 1A, recommend to use at about 0.8A to prevent motor from overheating. (2) For MarlinFirmware with 36 motor(8 teeth), modify the Extruder Pulse==Method 1: Modify pulse by firmware: #define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 870 }. Method 2: Send G code (sent by slicing software command): M92 E870 M500. If motor(10 teeth), change Pulse Value: 691.
- Features: Moons 36 motor with 8 tooth gear, good thermal control ability, large torque; High-quality harden steel helical gears with nano-coating, wear-resistant, good precision and long life; Insert a metal joint for telfo tube, which can be adapted to more models no mater Short-range or Long-range distance.
- Applicable models: VORON2.4 series, CR-10, CR10S, CR-10 4S, CR-10 5S, CR-10 MINI, CR-20, ENDER-2, ENDER-3, ENDER-3 PRO, ENDER-3 V2 , GasherbrumK3, Prusai3 MK3 MK3S+ etc. It fits almost all FDM 3D printers if you can design the mounting bracket.
- See more on Amazon...
Brand: FYSETC | Manufacturer: fuyuansheng
See On Amazon #14
FYSETC Upgrade 3D Printer Accessory - 2PCS TF Memory Card Extension Adapter - Only Micro SD Card Extender Module: Not Include TF Part Compatible Bambulab A1 Mini Ender 3 V2 Neo Ender 5 Pro Voron2.4
Asin: B0C3G7RND6
High Quality: Made Of High Quality Gold Plating. Smoothly Plug(Unplug). Gcode Data Transmission Is Stable And Durable..
Package Includes: 2Pcs Tf Card Extender Modules, Not Include The Tf Card..
Wide Application: Specially Designed To Extend The Lifecycle Of Tf Card, So It Can Be Compatible With Those Tf Card 3D Printers, Such As Ender 3 Ender 3 Pro Ender 3 V2 Neo Voxellab Aquilla Kobra Ender 5 Pro Neptune2 Ender 3 Max Cr-10S Pro Vorn 0 2.4 Switchwire Printers. Or Other Devices..
Easy To Use: Just Put The Mini Sd Card Into This Connector Housing, Then Insert It To Your Equipment. This Module Helps Reduce The Wear And Tear On Micro Sd Card And Increase The Card's Service Life. Also Prevent Sd Card From Losing While Among Many Subjects..
Features
- Model Name: Micro SD card adapter, a new upgrade 3D Printer part. NOT for Bambulab X1C, a bit short to insert into the machine's card slot, maybe Neither for X1P - P1P. But work on Bambulab A1 Mini.
- Easy to use: Just put the mini sd card into this connector housing, then insert it to your equipment. This module helps reduce the wear and tear on micro SD card and increase the card's service life. Also Prevent SD card from losing while among many subjects.
- High Quality: Made of high quality gold plating. Smoothly plug(unplug). Gcode Data transmission is stable and durable.
- Wide Application: Specially designed to extend the lifecycle of TF card, so it can be compatible with those TF card 3d printers, such as Ender 3 Ender 3 pro Ender 3 v2 Neo Voxellab Aquilla Kobra Ender 5 pro Neptune2 Ender 3 Max CR-10S PRO Vorn 0 2.4 Switchwire Printers. or other devices.
- Package includes: 2PCS tf card extender modules, not include the tf card.
- See more on Amazon...
Brand: FYSETC | Manufacturer: fuyuansheng
See On Amazon #15
FYSETC 3D Printer Parts VoronSteathburner Extruder Head SB CW2 Hotend Hardware Kit No Printed Parts with 36mm Motor Cooling Fan Compatible with Voron2.4 R2 Triden Switchwire Vorn 1.8
Asin: B0BCKL3JWM
!!!Note:The Led Light In Our Kit Is Customised (Red (+) Power, Yellow Signal, Black (-) Ground, With A Xhb2.54 3P), A Bit Different From The Officials. It Needs You To Print Our Led Carrier Block On Github:Fysetc/Fysetc-Voron-Stealthburne-Kit/Blob/Main/Stealthburne_Led_Carrier-Beta.Stl. More Support: The Official Vorn Tutorial Information: Vorndesign Dot Com/Vorn_Stealthburne. If For The Extension, Our Engineer Recommends To Use A Quality Wire With Low Resistance, Such As Ptfe Wire..
How To Modify The Gear Ratios By Firmware: Rotation_Distance: 22.0 #Bondtech 5Mm Drive Gears; Gear_Ratio: 50:10 #Stealthburne Gear Ratio. After Modifying The Gear Ratio, Then Calibrate The Rotation_Distance Value. If Any Questions About This Item, Please Feel Free To Contact Us Via Your Order Id. We're Here Ready To Assist You..
About The Printed Parts: Please Go To Search Stl Files On Github: Vorondesign/Vorn-Afterburne/Tree/Sb-Beta, Then You Can Print Whatever Color To Match With That Of Your Aluminum Profile..
Please Set The Current To About 0.3-0.35A For The 36Mm Pancake Motor, Not Exceed That, Or It Will Be Overheating. Package Listings: Comes With All The Necessary Hardware Screw Nuts, 2*Cooling Fan(5015+4010) And A 36Mm Pancake Stepper Motor, Are Shown In The Main Picture, Does Not Include The Printed Parts/ Hotend/ Heater Cartridge/ Thermistor, Etc..
Features
- Applicable models: VoronSteathburner Extruder Upgraded SB hot end kit is compatible with VORN 2.4/ Triden/Switchwire and VORN 1.8 3d printer.
- Please set the current to about 0.3-0.35A for the 36mm Pancake Motor, not exceed that, or it will be overheating. Package listings: Comes with all the necessary hardware screw nuts, 2*cooling fan(5015+4010) and a 36mm pancake stepper motor, are shown in the main picture, does not include the Printed Parts/ Hotend/ Heater Cartridge/ Thermistor, etc.
- !!!Note:the LED light in our kit is customised (Red (+) Power, Yellow Signal, Black (-) Ground, with a XHB2.54 3P), a bit different from the officials. It needs you to print our Led Carrier Block on github:FYSETC/FYSETC-VORON-Stealthburne-kit/blob/main/stealthburne_LED_carrier-beta.STL. More Support: The Official Vorn tutorial information: vorndesign dot com/vorn_stealthburne. If for the extension, our engineer recommends to use a quality wire with low resistance, such as PTFE wire.
- About the printed parts: Please go to search STL files on github: VoronDesign/Vorn-Afterburne/tree/sb-beta, then you can print whatever color to match with that of your aluminum profile.
- How to modify the gear ratios by firmware: rotation_distance: 22.0 #Bondtech 5mm Drive Gears; gear_ratio: 50:10 #Stealthburne Gear Ratio. After modifying the gear ratio, then calibrate the rotation_distance value. If any questions about this item, please feel free to contact us via your order ID. We're here ready to assist you.
- See more on Amazon...
Brand: FYSETC | Manufacturer: fuyuansheng
See On Amazon #16
FYSETC 3D Printer Ender 3 S1 Pro Ender 5 Plus Heat Bed Leveling Part Silicone Solid Mounts Column OD 0.63in ID 0.16in Stable Hot Bed Tool Heat-Resistant for Ender 5/ Pro A8 Wanhao D9 Meg- Pack of 4
Asin: B07MKQGQJW
This Heat-Resistant And Pressure-Resistant Silicone Leveling Column With A 4Mm Inner Diameter Makes It Better To Level Your 3D Printer..
After Sales Guarantee: Each One Desfective Item Can Have The Free Replace Or Refund, Need More Help Please Feel Free To Email Or Q&A Us, We Will Try Our Best To Service You..
The Silicone Buffers Are Simply Installed Instead Of The Original Spring And It Is No Longer Possible Movement, Your Set Levels Remain!.
New Upgraded 3D Printing Leveling Tool, Special Design For Ender 3 S1 Pro/Anet A8 Wanhao D9 Anycubic Mega I3 And Most Heated Bed.(Not Suitable For Ender 3 And Cr10, If You Need Ender 3 And Cr10, Please Search Asin:B07mh4jqb8).
Features
- For 3D Printer Hot Bed/ Platform, bottom connect, can replace original spring leveling.
- New upgraded 3d printing leveling tool, Special design for Ender 3 s1 pro/Anet A8 Wanhao D9 Anycubic Mega i3 and most heated bed.(Not suitable for ENDER 3 and CR10, if you need ENDER 3 and CR10, please search ASIN:B07MH4JQB8)
- This heat-resistant and pressure-resistant silicone leveling column with a 4mm inner diameter makes it better to level your 3D printer.
- The silicone buffers are simply installed instead of the original spring and it is no longer possible movement, your set levels remain!
- After Sales Guarantee: each one desfective item can have the free replace or refund, need more help please feel free to email or Q&A us, we will try our best to service you.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #17
FYSETC 4PCS 3D Printer Feet Vorn 2.4 Air Compressor Rubber Feet : Anti-Vibration Rubber Landing Mat with M6 Screws and Nuts Horn Pad Shock Absorption Rubber Cushion for Vacuum Pump Oil-Free
Asin: B09CDBX3NF
Function: Has A Protection Help For Printer To Be Weared Out When Directly Placed On The Desktop Or The Ground, Anti-Vibration, Shockproof..
Package Include:4Pcs Black Rubber Landing Mat Feet, 4Pcs Screws And Nuts..
Size: 49Mm/1.9Inch X 19Mm/0.7Inch X 28Mm/1.1Inch, Hold D:6Mm/0.2Inch..
Used: 4 Antivibration Feet With Extra M6 Screws Used For Voro 2.4, 3D Printer Hardware Parts. If For Old Model, You Need To Use The Stock M5x10 Bhcs And M5 Hex Nut. The Included M6 Screw Nut Just As A Spare Accessory..
Features
- Material: made of high quality rubber, solid and durable, long service life, easy to install.
- Used: 4 Antivibration Feet with extra M6 screws used for Voro 2.4, 3D printer hardware parts. If for old model, you need to use the stock M5x10 BHCS and M5 Hex Nut. The included M6 screw nut just as a Spare accessory.
- Function: Has a protection help for printer to be weared out when directly placed on the desktop or the ground, Anti-Vibration, shockproof.
- Size: 49mm/1.9inch x 19mm/0.7inch x 28mm/1.1inch, hold D:6mm/0.2inch.
- Package include:4pcs black rubber landing mat feet, 4pcs screws and nuts.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #18
FYSETC 3D Printer Vorn 2.4 Hotend Parts Portable Input Shape-r V1 with RP2040 USB Accelerometer Sensor Support Klippe-r for Voro 2.4 0.1 Triden-t Neptune3 4 Pro-Pack of 1
Asin: B0B8MMW2Z9
Compatibility: Compact Size And Easy To Dock On Print Head(Afterburner, Stealthburner Or Even Other Print Head) As We Designed Different Holes On It With Essential Fasteners For You To Install It On Print Head. Usb-C Port, Handy To Use Usb To Connect! Pleaase Note: Work For Most 3D Printer, Include Popular Vorn 2.4, 0.1 Triden Project, But We Don't Test For Every Printer Yet, So If You Want To Try, Contact Us When You Need Further..
Mothod: Set Up Input Shape-R By Attaching Your Adxl Directly To The Pi, Make Sure You Comment Out Or Delete The [Adxl345] And [Resonance_Tester] Sections In Printer.Cfg. They Have Been Moved To The New Config File: E.G. Adxl.Cfg. Failing To Do This Will Cause Klippe To Error Out..
Notes: In Order To Lower The Noise, We Recommend With Adxl Connect The Vcc Pin To Vbus Of Pi Pico ( Vbus Below 40), Connected To 3V3 Noises Was Above 100. Another, The First Measurement, After Freshly Connecting The Rpi Pico Or Restarting Klipper, Will Fail. This Is Due To Some Issues With The Spi Initialization. Subsequent Measurements Will Work; If It Fails A Second Time You May Have A Wiring Issue..
Portable: You Can Use It On Multiple Klipper Firmware Based 3D Printer With Same Configuration File. Allows You Just Plug In Via Usb And Avoid Setting Up Each Printers Rpi As A Secondary Mcu, Save Your Time..
Features
- Upgrades: A great solution for using an ADXL on multiple printers! Base on popular RP2040 chip. The biggest advantage comes in when you have Pi versions without the pins on some of your machines. Even if you have all full size Pi with header pins, you would have to make an extension for each to achieve the same convenience. We have more information on github dot com by searching: FYSETC / FYSETC-PortableInputShaper.
- Portable: You can use it on multiple Klipper firmware based 3D printer with same configuration file. allows you just plug in via usb and avoid setting up each printers RPi as a secondary MCU, Save your time.
- Compatibility: Compact size and easy to dock on print head(AfterBurner, StealthBurner or even other print head) as we designed different holes on it with essential fasteners for you to install it on print head. USB-C port, handy to use USB to connect! Pleaase note: Work for most 3d printer, include Popular vorn 2.4, 0.1 triden project, but we don't test for every printer yet, so if you want to try, contact us when you need further.
- Notes: In order to lower the noise, we recommend with ADXL connect the VCC pin to VBUS of PI PICO ( VBUS below 40), connected to 3V3 noises was above 100. Another, The first measurement, after freshly connecting the RPi Pico or restarting Klipper, will fail. This is due to some issues with the SPI initialization. Subsequent measurements will work; If it fails a second time you may have a wiring issue.
- Mothod: set up Input Shape-r by attaching your ADXL directly to the Pi, make sure you comment out or delete the [adxl345] and [resonance_tester] sections in printer.cfg. They have been moved to the new config file: e.g. ADXL.cfg. Failing to do this will cause Klippe to error out.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon #19
FYSETC 3D Printer Parts Prusa i3 Mini Heated Bed Thermistor Cartridge Replacement 104NT-4-R025H42G (104GT-2) with 550mm/21.6inch Cable Dupon Connector for Prusa Mini 3D Printer Accessories - Pack of 2
Asin: B0BGRQNSPK
3. Firmware Setting: 104Nt-4-R025h42g(104Gt-2) : 100K Thermistor - Atc Semite 104Gt-2/104Nt-4-R025h42g(Used In Parcan & J-Head) (4.7K Pullup) #Define Temp_Sensor_0 5.
5. Prusa Mini+ Heatbed Thermistor: 550Mm/21.6Inch Long Cable With Dupon Aircraft Connector, Easy To Assemble..
4. High Quality: Durable, Flexible And Long Lasting, Longer Life Span..
2. Made Of Imported Part: 104Nt-4-R025h42g Model Is The 104Gt-2 Thermistor's Upgrade, Newest Model, Which Can Be For 300℃ Long Hours Printing.
Features
- 1. 2pcs prusa mini heat bed thermistor: Prusa mini specific thermistor cartridge, to connect the hot bed, drop-in replacement. Model:104NT-4-R025H42G thermistor
- 2. Made of imported part: 104NT-4-R025H42G model is the 104GT-2 thermistor's upgrade, newest model, which can be for 300 long hours printing
- 3. Firmware setting: 104NT-4-R025H42G(104gt-2) : 100K thermistor - ATC Semite 104GT-2/104NT-4-R025H42G(Used in ParCan & J-Head) (4.7k pullup) #define TEMP_SENSOR_0 5
- 4. High quality: Durable, Flexible and Long Lasting, longer life span.
- 5. Prusa Mini+ heatbed thermistor: 550mm/21.6inch long cable with Dupon aircraft connector, easy to assemble.
- See more on Amazon...
Brand: FYSETC | Manufacturer: Fuyuansheng
See On Amazon
Looking For Something Else?
Search