BETAFPV VR02 5.8GHz 48CH FPV Goggles 4.3inch 3.7V RaceBand Auto-Searching Beginner with HD LCD Screen for RC FPV Racing Drone
Asin: B0BYF22MZ9
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Tool Supplies: Assembly Category.
Remote Control Peripherals/Devices: Remote Controller.
Four-Wheel Drive Attributes: Assemblage.
For Vehicle Type: Helicopters.
Features
- Model number: VR02 FPV Goggles
- For vehicle type: Helicopters
- Tool supplies: Assembly Category
- Four-wheel drive attributes: Assemblage
- Remote control peripherals/devices: Remote Controller
- See more on Amazon...
Brand: Generic | Manufacturer: Generic
See On Amazon Similar To BETAFPV VR02 5.8GHz 48CH FPV
#1
BETAFPV Meteor65 Pro 1S Micro FPV Whoop Drone Quadcopter for FPV Racing Flight Indoor Outdoor with F4 1S 5A Flight Controller 0802SE 19500KV Motor 35mm 3-Blade Propellers C03 Camera - ELRS
Asin: B0BMVGQLX4 | Model: 01010022_1 | PartNumber: 01010022_1
🎄【Frame&Propeller】Meteor65 Pro Frame Has The Same Perfect Performance As The Popular Meteor65 Frame. The Lightest Lower Profile 65Mm Frame To Fit 35Mm Propellers. The Battery Slot Is Closer To The Center Of Gravity For A Smoother Flying Experience, And You Will Land On The Motor Screws Instead Of The Battery..
🎄【Bt2.0 Connector】Bt2.0 Connector Has Decreased Internal Resistance Of Connector Effectively Allowing More Current To Be Transferred, Which Means It Supports 9A Continuous Current (15A Burst). Pilots Can Enjoy More Flight Time Without Disturbing Low Voltage Warning Due To Reducing Voltage Sag. Get Stronger Power And Longer Flight Time On 1S Brushless Drones..
🎄【Camera&Canopy】Built-In 1.52G Ultralight Weight C03 Camera, Offer A High-Quality, Clear And Sharper Images To Pilots. Adopted With A Injection Molding Canopy Which Only 1.60G, More Durable, Anti-Ruin, And Heat-Resitant, Gives Your Whoop Drone A Good Protection..
🎄【Power System】By Using The Latest 0802Se 19500Kv Motors And 35Mm 3-Blade Props, This Equipment Ensures Excellent Performance Of Power And Thrust. Makes The Perfect Dynamic Balance, Which Gives The Drone More Flexibility And Longer Flying Time..
Features
- F4 1S 5A FC The flight controller of Meteor65 Pro has been upgraded to F4 1S 5A Serial ELRS V3.0, which can be updated via Wi-Fi or Betaflight serial passthrough. Pilots can flash any version of ELRS RX firmware without updating FC firmware. With a high-quality BMI270 gyro and BB51 ESC hardware. In addition, this new board supports the Betaflight Blackbox function.
- Power System By using the latest 0802SE 19500KV motors and 35mm 3-blade props, this equipment ensures excellent performance of power and thrust. Makes the perfect dynamic balance, which gives the drone more flexibility and longer flying time.
- Frame&Propeller Meteor65 Pro frame has the same perfect performance as the popular Meteor65 frame. The lightest lower profile 65mm frame to fit 35mm propellers. The battery slot is closer to the center of gravity for a smoother flying experience, and you will land on the motor screws instead of the battery.
- Camera&Canopy Built-in 1.52g ultralight weight C03 camera, offer a high-quality, clear and sharper images to pilots. Adopted with a injection molding canopy which only 1.60g, more durable, anti-ruin, and heat-resitant, gives your whoop drone a good protection.
- BT2.0 Connector BT2.0 connector has decreased internal resistance of connector effectively allowing more current to be transferred, which means it supports 9A continuous current (15A burst). Pilots can enjoy more flight time without disturbing low voltage warning due to reducing voltage sag. Get stronger power and longer flight time on 1S brushless drones.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 2.76 x 4.72 x 4.72 inches | Weight: 0.50 pounds
See On Amazon #2
BETAFPV Meteor75 Pro 1S Brushless Whoop Drone Quadcopter with 45mm 3-Blade Propellers for FPV Freestyle Racing Indoor Outdoor, Fly Time Up to 6min with BT2.0 550mAh 1S Lipo Battery-ELRS
Asin: B0BZVS49TJ | Model: 01010026_1 | PartNumber: 01010026_1
🎄【Motors&Battery】Meteor75 Pro Features Updated Powerful 22000Kv 1102 Motors And Bt2.0 550Mah 1S Battery, Which Provides A Larger Capacity And Higher Discharge Rate, Bringing More Flight Time And Robust Flight Performance To The Quadcopter..
🎄【Camera&Canopy】Built-In 1.45G Ultralight And Upgraded C03 Fpv Camera. This New Camera Has Optimal Performance For Indoor Whoop Drones. Adopted With An Injection Molding Technique, This Canopy Is 1.60G Ultralight Weight And Is More Durable, Anti-Ruin, And Heat-Resistant, Providing Good Protection For The Whoop Drone..
🎄【Fc&Esc】Equipped With F4 1S 5A Flight Controller(Serial Elrs). The Elrs Rx Version Comes With The Default Elrs V3.0 Firmware. The Esc On The Board Is Powered By Bb51 Hardware In Place Of Bb21, And The Gyro To Bosh Bmi270 For Better Performance And Stability..
🎄【Frame&Propellers】Meteor75 Pro Brushless Whoop Frame Is Built For The Largest 1S Brushless Drone Quadcopter. Featuring Motor Holders For Convenient Installation, And It Is Perfect For 45Mm Propellers. This Combo Performs Very Precisely, Agile, And Fantastic Flying. It Greatly Enhances The Thrust For 1S Whoop..
Features
- Ultra-Powerful Meteor75 Pro 1S brushless whoop quadcopter is the largest available 1S whoop on the current market. It can offer pilots a faster, more responsive flight experience, and longer flight time, which would be ideal for FPV racing or acrobatic flying indoors or outdoors.
- Frame&Propellers Meteor75 Pro brushless whoop frame is built for the largest 1S brushless drone quadcopter. Featuring motor holders for convenient installation, and it is perfect for 45mm propellers. This combo performs very precisely, agile, and fantastic flying. It greatly enhances the thrust for 1S whoop.
- Motors&Battery Meteor75 Pro features updated powerful 22000KV 1102 motors and BT2.0 550mAh 1S battery, which provides a larger capacity and higher discharge rate, bringing more flight time and robust flight performance to the quadcopter.
- FC&ESC Equipped with F4 1S 5A flight controller(Serial ELRS). The ELRS RX version comes with the default ELRS V3.0 firmware. The ESC on the board is powered by BB51 hardware in place of BB21, and the gyro to BOSH BMI270 for better performance and stability.
- Camera&Canopy Built-in 1.45g ultralight and upgraded C03 FPV camera. This new camera has optimal performance for indoor whoop drones. Adopted with an injection molding technique, this canopy is 1.60g ultralight weight and is more durable, anti-ruin, and heat-resistant, providing good protection for the whoop drone.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 1.00 x 4.00 x 4.00 inches
See On Amazon #3
BETAFPV C04 Camera and VTX Module for Cetus X Quadcopter Betaflight Version Flgiht Controller with M04 5.8G VTX, 160 FOV, 1/3" CMOS 1200TVL 25-400mW VTX for FPV Racing Drone
Asin: B0CZ6RLFVZ
【Application】M04 Vtx Is Perfectly Suitable For The Cetus X Brushless Drone For Longer Range Flying. We Highly Recommend Using It With F4 2S 15A V1.0 Flight Controller..
【Package】You Will Receive A C04 Camera With M04 Vtx For Cetus X Brushless Drone, Just Plug And Play; Any Technical Support Is Needed Just Feel Free To Find Us Via Amazon..
【Version】This Camera Can Only Work With The Cetus X Quadcopter Which Is A Betaflight Version Flight Controller. It Can't Work With The Cetus Fc..
【Easy To Install】M04 Vtx Features A Jst0.8 Connector, Which Is More Easier To Replace With The Cetus X Betaflight Version Flight Controller, Plug And Play Makes It Easy To Install Without Soldering..
Features
- High Output Power The switchable power of M04 5.8G VTX includes 25mW, 100mW, 200mW and 350mW, 400mW, achieves long-range flying, provides a stable image and strong transmission for tiny drones to explore more possibilities and funny.
- Easy to Install M04 VTX features a JST0.8 connector, which is more easier to replace with the Cetus X Betaflight version flight controller, plug and play makes it easy to install without soldering.
- Application M04 VTX is perfectly suitable for the Cetus X brushless drone for longer range flying. We highly recommend using it with F4 2S 15A V1.0 flight controller.
- Version This camera can only work with the Cetus X quadcopter which is a Betaflight Version flight controller. It can't work with the Cetus FC.
- Package You will receive a C04 camera with M04 VTX for Cetus X brushless drone, just plug and play; Any technical support is needed just feel free to find us via Amazon.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 1.40 x 2.20 x 2.20 inches | Weight: 0.02 Pounds
See On Amazon #4
BETAFPV Literadio 2 SE Frsky D16 Transmitter Left Throttle RC Remote Controller Built-in 2000mAh Battery with FPV Simulator Function for FPV Racing Drone
Asin: B08PV3QRTG | Model: 00313686 | PartNumber: 00313686
【Built-In Battery】 The Literadio 2 Se Continued Working Time For A Fully Charged Battery Is About 8 Hours, Bringing An Excellent Endurance Performance And Enjoy Control..
【System Upgrade】Updates With Betafpv Self-Developed Literadio System. Player Can Directly Operate The Joystick Calibration And Upgrade Firmware On The Radio Transmitter，Which Is More Convenient For The Beginner Racer To Operate..
【Joystick Calibration】 Manually Calibrate The Joystick. The Literadio 2 Se Joystick Data May Offset And Can Calibrate After It Has Been Used For A Period Of Time (If Joysticks Are Hit By Physical)..
【Fpv Simulator】Compared With Other Remote Controllers, Literadios 2Se Has The Function Of Fpv Simulator Which Can Acts As A Usb Joystick When Connected To A Personal Computer. So You Could Use It To Play Fpv Simulators Like Ereadrone..
Features
- BETAFPV Firmware D16 protocol does not support the Frsky receivers with ACCST 2.0 firmware or higher, and it can only bind with ACCST 1.X firmware version XM+ receivers.
- FPV Simulator Compared with other remote controllers, LiteRadios 2SE has the function of FPV simulator which can acts as a USB Joystick when connected to a personal computer. So you could use it to play FPV simulators like EREADRONE.
- Built-in Battery The LiteRadio 2 SE continued working time for a fully charged battery is about 8 hours, bringing an excellent endurance performance and enjoy control.
- Joystick Calibration Manually calibrate the joystick. The LiteRadio 2 SE joystick data may offset and can calibrate after it has been used for a period of time (if joysticks are hit by physical).
- System Upgrade Updates with BETAFPV self-developed LiteRadio System. Player can directly operate the Joystick Calibration and Upgrade Firmware on the radio transmitter which is more convenient for the beginner racer to operate.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 0.20 x 0.39 x 0.31 inches | Weight: 0.22 Pounds
See On Amazon #5
BETAFPV Cetus Lite FPV Drone Kit for Kids, with Altitude Hold Self Protection Function 2 Speed Modes Support Simulator Ready to Fly Kit for Children Gifts FPV Beginners to Start Flying Indoor
Asin: B0BL6S25LX
🎄【Fpv Simulator Supported】You Can Learn And Practice Flying A Quadcopter Through An Fpv Simulator Before Real Flying. Literadio 1 Supports Playing Fpv Simulators Like Drl/Dcl/Uncrashed/Liftoff. Literadio 1 Is Capable Of Practicing And Charging At The Same Time..
🎄【Ready To Fly】User Manual Is Included, You Will Get The Drone, Transmitter, Goggles, Batteries, And Necessary Accessories At The Same Time. Ready To Fly. Cetus Lite Fpv Drone Kit Is An Excellent Choice For New Fpv Beginners To Start Flying, And Also A Safe Miniature Toy For Children To Play With..
🎄【Vr02 Fpv Goggles】Cetus Lite Fpv Kit Includes Vr02 Fpv Goggles And The Quadcopter Has A Built-In Vtx And Camera, Allowing Users To Fly Quadcopter With A First-Person View And Have An Immersive Flying Experience. Users Also Can Check The Quadcopter Flying Status From The Osd Information Shown On The Goggles..
🎄【Effective Protection Frame Design】Safety Is Important, Especially For Children. The Cetus Lite Features A Propeller Guard Design, Protecting From Users Getting Hurt. The Frame Is Made Of Pa12, A High-Quality And Durable Material, Allowing It To Stay Strong And Detached Even During Flight Crashes. Users Can Fly It Confidently And Has No Concern About Crashing. This Reliable Design Ensures Safe Indoor And Outdoor Flying..
Features
- Altitude Hold, Emergency Auto Locking Altitude hold keeps the drone hovering at a certain height, combining with the LiteRadio 1 that has two centering gimbals, new beginners can easily control the height of the quadcopter. Integrated with a 6-axis IMU (Inertial Measurement Unit) sensor, which enables the quadcopter to ensure flight safeness. The Cetus Lite quadcopter will automatically disarm the motors when a collision is detected. Guarantees pilots' and property safeness.
- Effective Protection Frame Design Safety is important, especially for children. The Cetus Lite features a propeller guard design, protecting from users getting hurt. The frame is made of PA12, a high-quality and durable material, allowing it to stay strong and detached even during flight crashes. Users can fly it confidently and has no concern about crashing. This reliable design ensures safe indoor and outdoor flying.
- FPV Simulator Supported You can learn and practice flying a quadcopter through an FPV simulator before real flying. LiteRadio 1 supports playing FPV simulators like DRL/DCL/Uncrashed/Liftoff. LiteRadio 1 is capable of practicing and charging at the same time.
- VR02 FPV Goggles Cetus Lite FPV Kit includes VR02 FPV goggles and the quadcopter has a built-in VTX and camera, allowing users to fly quadcopter with a First-person view and have an immersive flying experience. Users also can check the quadcopter flying status from the OSD information shown on the goggles.
- Ready to Fly User manual is included, you will get the drone, transmitter, goggles, batteries, and necessary accessories at the same time. Ready to Fly. Cetus Lite FPV drone kit is an excellent choice for new FPV beginners to start flying, and also a safe miniature toy for children to play with.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 4.13 x 9.53 x 6.69 inches | Weight: 1.76 Pounds
See On Amazon #6
BETAFPV Serial ELRS F4 2-3S 20A AIO V1 Brsushless Flight Controller with O3 6Pin PMU, BB51 Bluejay 48K ESC, STM32F405 Chip, 9V@2A BEC for 2-3S HD Digital Quadcopter like Pavo Pico Pavo20
Asin: B0CKT5ZR3P
【20A Esc】The Power Range Of 2-3S Provides Increased Thrust And Improved Control With A 20A Esc Featuring A Single Nmos For Continuous Current Capability..
【External Edvice】It Features An Stm32f405rgt6 Chip, Integrate Serial Elrs 2.4G Receiver, 16M Black Box, Barometer, Current Meter, Reserve 3 Complete Serial Ports And A Standard Sbus, Support Gps, Hd Vtx, External Receiver, And Other Equipment..
【Cutoff Power】The Upgraded Onboard Receiver Allows Selective Power Cutoff For Saving Power And Offers Additional Uart Tx3 And Rx3 Ports For Connecting The External Device..
【Dji O3 6-Pin Pmu】It Includes A New Dji O3 6-Pin Pmu For Easy Installation Without Soldering, Reducing Assembly Complexity. And Redesigned Solder Pad Layout Ensures Larger, More Secure Pads For Easy And Reliable Soldering, While The Relocated Usb Port At The Rear Facilitates Computer Tuning. Newbie Friendly..
Features
- Designed for HD VTX F4 2-3S 20A AIO V1 Brushless Flight Controller is designed for HD VTX, which features a dual 9V@2A for DJI O3 and 5V@3A for external device BEC solution to prevent screen blackout on the DJI O3 due to low voltage during throttle increase.
- DJI O3 6-pin PMU It includes a new DJI O3 6-pin PMU for easy installation without soldering, reducing assembly complexity. And redesigned solder pad layout ensures larger, more secure pads for easy and reliable soldering, while the relocated USB port at the rear facilitates computer tuning. Newbie friendly.
- 20A ESC The power range of 2-3S provides increased thrust and improved control with a 20A ESC featuring a single NMOS for continuous current capability.
- Cutoff Power The upgraded onboard receiver allows selective power cutoff for saving power and offers additional UART TX3 and RX3 ports for connecting the external device.
- External Edvice It features an STM32F405RGT6 chip, Integrate Serial ELRS 2.4G receiver, 16M black box, barometer, current meter, reserve 3 complete serial ports and a standard SBUS, support GPS, HD VTX, external receiver, and other equipment.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 0.80 x 2.20 x 2.20 Inches
See On Amazon #7
BETAFPV SuperD ExpressLRS 2.4GHz V3.0 Diversity Receiver with Two Antennas TXCO Tech Long Range Performance Support CRSF Protocol Compatible with FPV Drone Freestyle and Fixed-Wing Aircraft
Asin: B0BMLP81S8 | Model: 01070006_1 | PartNumber: 01070006_1
【Two Dipole T Antennas】Superd Elrs 2.4G Diversity Receiver Comes With Two Dipole T Antennas, It Will Create An Omnidirectional Signal For Good Signal Transmission. Placing The Antenna Separately And Vertically As Far Part As Possible To Get A Better Signal Is Recommended..
【Ultralight Weight】 Ultralight Weight Only 1.1G Without The Antenna. The Receiver Board Features A Reasonable Layout And Is Impeccably Clean. Very Easy To Solder..
【Compatible Products】Not Only It Is Used For Fpv Drones But Also For Fpv Fixed-Wing, Or Other Fpv Aircraft. It Has Superb Performance In Long Range Flying. It Greatly Fulfills The Requirements Of Reliability For Long Range Flying, Aerial Photography, Or Fpv Freestyle Tricks..
【Dual Rf Receiver Chains】Superd Elrs 2.4G Diversity Receiver With Two Complete Rf Receiver Chains (Referring To Pa+Lna+Sx1280), Ensuring Longer And More Stable Flying For Fpv Drones And Rc Airplanes. Based On The Latest Official Exprsslrs. It Comes With Expresslrs V3.0.0 Firmware..
Features
- TXCO Tech SuperD ELRS 2.4G Diversity Receiver is built-in a TCXO (temperature compensated crystal oscillator), which is shared by two RF chips for a super accurate clock source. The true diversity receiver including two RF chips and PA+LNA will generate a large amount of heat when working. With the high-quality TCXO, it can withstand extreme temperatures with no fear of heat and cold, continuously outputting accurate frequency for long range flight.
- Dual RF Receiver Chains SuperD ELRS 2.4G Diversity Receiver with two complete RF receiver chains (referring to PA+LNA+SX1280), ensuring longer and more stable flying for FPV drones and RC airplanes. Based on the latest official ExprssLRS. It comes with ExpressLRS V3.0.0 firmware.
- Two Dipole T Antennas SuperD ELRS 2.4G Diversity Receiver comes with Two Dipole T antennas, it will create an omnidirectional signal for good signal transmission. Placing the antenna separately and vertically as far part as possible to get a better signal is recommended.
- Compatible Products Not only it is used for FPV drones but also for FPV fixed-wing, or other FPV aircraft. It has superb performance in long range flying. It greatly fulfills the requirements of reliability for long range flying, aerial photography, or FPV freestyle tricks.
- Ultralight Weight Ultralight weight only 1.1g without the antenna. The receiver board features a reasonable layout and is impeccably clean. Very easy to solder.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 0.39 x 3.94 x 2.76 inches
See On Amazon #8
BETAFPV C02 FPV Micro Camera 1/4 CMOS Sensor 1200TVL 2.1mm Lens NTSC FOV 160 Degree with Global WDR for Micro Whoop Drone Like Meteor Cetus Series Drones
Asin: B087RFSP9Q | Model: 00313-C01 | PartNumber: 00313-C01
【Plug-N-Play】Feature A Jst-0.8 Connector. Very Easy To Install With The Plug-And-Play Design, It's A Great Choice For Betafpv F4 1S Aio Fc, And Nbd Beebrain Flight Controllers.
【Ultra-Light Combo】You Will Receive An Injection Molding Micro Canopy, More Durable And Not Easy To Break, Which Is The Perfect Combo With C02 Fpv Micro Camera.
【Suitable Drones】Best Match With M01, A01 And M03 Vtx, Suitable For All Brushed And 1S Brushless Micro Drone Like Beta65s, Meteor65, Meteor75, Cetus Series. Pilots Can Enjoy Good Image Quality While Reducing The Weight Of The Whoop Drone.
【Ultralight Weight】2.1Mm Lens, Fov 160° Beyond The Wide-Angle For Recording More Wide And Beautiful Scenes While Minimizing The Weight To 1.45G.
Features
- Application BETAFPV C02 FPV micro camera comes with 1200TVL resolution and 1/4" CMOS sensor, it ensures a high-quality and clear image. Global WDR, 16:9 aspect ratio, you can shoot clear dynamic image even in low light conditions
- Ultralight Weight 2.1mm lens, FOV 160 beyond the wide-angle for recording more wide and beautiful scenes while minimizing the weight to 1.45g
- Plug-N-Play Feature a JST-0.8 connector. Very easy to install with the plug-and-play design, it's a great choice for BETAFPV F4 1S AIO FC, and NBD BeeBrain flight controllers
- Suitable Drones Best match with M01, A01 and M03 VTX, suitable for all brushed and 1S brushless micro drone like Beta65S, Meteor65, Meteor75, Cetus Series. Pilots can enjoy good image quality while reducing the weight of the whoop drone
- Ultra-light Combo You will receive an injection molding micro canopy, more durable and not easy to break, which is the perfect combo with C02 FPV micro camera
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
See On Amazon #9
BETAFPV Meteor85 2S Brushless Whoop Drone Quadcopter for FPV Freestyle Flight Indoor Outdoor Fly Up to 7 Minutes with F4 1S 12A AIO Flight Controller 1103 11000KV Motor 2015 2-Blade Propeller-Frsky
Asin: B0BR7VPJ7N | Model: 01010024_2 | PartNumber: 01010024_2
【New Frame】Meteor85 Frame Is Designed With A Low Profile Of Battery Slot Height, Perfectly Suitable For A 450Mah 2S Lipo Battery, No Battery Strap Is Needed, More Convenient. The Drone's Gravity Center Is Reduced And It Improved The Sense Of Compactness..
【450Mah 2S Battery】Meteor85 Comes With Alava 2S 450Mah 75C Battery, This Battery Is Perfectly Suitable For The Battery Slot Of Meteor85 Frame. You Can Get Up To 7 Minutes Of Flight Time On Meteor85 2S Brushless Whoop Drone When Your Flight Is Stable..
【Camera&Canopy】Built-In A 2G Ultralight Weight Ant Fpv Micro Camera, Camera Tilt Angle Is Adjustable From 0-40 Degrees To Further Fulfill Different Flight Requirements. Adopted With An Injection Molding Technique Hd Canopy, Is Durable, Anti-Ruin, And Heat-Resistant, Offering Good Protection For Whoop Drones..
【Propulsion System】Fetures An Upgraded Propulsion System, Meteor85 Equips Gemfan 2015 2-Blade Propellers With 11000Kv 1103 Motors, It Provides Pilots With A High-Efficiency Flight Experience And Is Super Suitable For Fpv Freestyle Flight..
Features
- Updated Meteor85 Meteor85, a new era of 2S whoop drone comes back with a completely new look and equipment. Perfect balance between performance, weight, durability, and premium build design. Provides pilots with superior performance on freestyle tricks.
- Propulsion System Fetures an upgraded propulsion system, Meteor85 equips Gemfan 2015 2-blade propellers with 11000KV 1103 motors, it provides pilots with a high-efficiency flight experience and is super suitable for FPV freestyle flight.
- New Frame Meteor85 frame is designed with a low profile of battery slot height, perfectly suitable for a 450mAh 2S lipo battery, no battery strap is needed, more convenient. The drone's gravity center is reduced and it improved the sense of compactness.
- Camera&Canopy Built-in a 2g ultralight weight Ant FPV micro camera, camera tilt angle is adjustable from 0-40 degrees to further fulfill different flight requirements. Adopted with an injection molding technique HD canopy, is durable, anti-ruin, and heat-resistant, offering good protection for whoop drones.
- 450mAh 2S Battery Meteor85 comes with aLAVA 2S 450mAh 75C Battery, this battery is perfectly suitable for the battery slot of Meteor85 frame. You can get up to 7 minutes of flight time on Meteor85 2S brushless whoop drone when your flight is stable.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 2.56 x 5.12 x 5.12 Inches | Weight: 0.50 Pounds
See On Amazon #10
BETAFPV Meteor75 1S Micro FPV Whoop Drone Quadcopter for FPV Racing Freestyle Flight Indoor Outdoor Fly Up to 6 Minutes with F4 1S 5A Flight Controller 0802SE 19500KV Motor C03 Camera - ELRS
Asin: B0BMVG1J1T | Model: 01010023_1 | PartNumber: 01010023_1
【Power System】By Using The Latest 0802Se 19500Kv Motors And 40Mm 2-Blade Props, Which Provides Pilots With Stronger Experience Of Powerful Indoor And Outdoor Flight. The Newest Motor Makes The Perfect Dynamic Balance, Which Gives The Drone More Flexibility And Longer Flying Time, Which Is Perfect For The Weight-Sensitive 75Mm Brushless Whoop Drone..
【Meteor75 Frame】Meteor75 Frame Weighs Only 5.68G And Is Durable Enough. The Battery Slot Is Closer To The Center Of Gravity For A Smoother Flying Experience, And You Will Land On The Motor Screws Instead Of The Battery..
【Camera&Canopy】Built-In 1.52G Ultralight Weight C03 Camera, Offer A High-Quality, Clear And Sharper Images To Pilots. Adopted With A Injection Molding Canopy Which Only 1.60G, More Durable, Anti-Ruin, And Heat-Resitant, Gives Your Whoop Drone A Good Protection..
【F4 1S 5A Fc】The Flight Controller Of Meteor75 Has Been Upgraded To F4 1S 5A Serial Elrs V3.0, Which Can Be Updated Via Wi-Fi Or Betaflight Serial Passthrough. Pilots Can Flash Any Version Of Elrs Rx Firmware Without Updating Fc Firmware. With A High-Quality Bmi270 Gyro And Bb51 Esc Hardware. In Addition, This New Board Supports The Betaflight Blackbox Function..
Features
- Upgraded Meteor75 Meteor75, 1S lightweight whoop drone comes back with a completely new look. Equipped with the BT2.0 connector, the lightest F4 1S 5A FC, new 0802SE 19500KV motors, and a C03 FPV camera. With the combination of those electronics and parts, it reaches the best balance between performance, weight, durability, and premium build design.
- F4 1S 5A FC The flight controller of Meteor75 has been upgraded to F4 1S 5A Serial ELRS V3.0, which can be updated via Wi-Fi or Betaflight serial passthrough. Pilots can flash any version of ELRS RX firmware without updating FC firmware. With a high-quality BMI270 gyro and BB51 ESC hardware. In addition, this new board supports the Betaflight Blackbox function.
- Power System By using the latest 0802SE 19500KV motors and 40mm 2-blade props, which provides pilots with stronger experience of powerful indoor and outdoor flight. The newest motor makes the perfect dynamic balance, which gives the drone more flexibility and longer flying time, which is perfect for the weight-sensitive 75mm brushless whoop drone.
- Camera&Canopy Built-in 1.52g ultralight weight C03 camera, offer a high-quality, clear and sharper images to pilots. Adopted with a injection molding canopy which only 1.60g, more durable, anti-ruin, and heat-resitant, gives your whoop drone a good protection.
- Meteor75 Frame Meteor75 frame weighs only 5.68g and is durable enough. The battery slot is closer to the center of gravity for a smoother flying experience, and you will land on the motor screws instead of the battery.
- See more on Amazon...
Brand: BETAFPV | Manufacturer: BETAFPV
Dimensions: 2.56 x 5.12 x 5.12 inches
See On Amazon
Looking For Something Else?
Search