RANDPOW Motorcycle Phone Charger, 6.4A Dual USB Quick Charge 3.0 Type C PD Motorcycle USB Charger with ON/Off Switch, Waterproof Quick Disconnect SAE to USB Adapter for Phone - Blue
Asin: B0BYS7MTT2
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Smart Chip - The Motorcycl Usb Charger Is Equipped With An Advanced Smart Chip That Detects The Voltage Of The Battery, Automatically Adjusts The Power Output According To The Connected Devices Plugged In To Maximize Charging, And Provides Wiring Protection To Allow For A Safe Charging Environment..
Universal Compatibility - The Motorcycle Usb Charger Input Voltage Is (12V-24V). It Can Automatically Adjust The Voltage Output According To Your Device (Usb-A: 5V/3.4A, 9V/2.5A, 12V/1.5A Type-C:5V/3A 9V/3A 12V/2.5A).Widely Used In Cell Phones, Ipads, Usb Lights And Other Electronic Devices..
Package Included - 1 X Motorcycle Phone Charger (Including User Manual & Mounting Accessories). We Offer An 18- Month Worry-Free Warranty And 24/7 Friendly Customer Service..
Led Indicator And Switch - The Red Led Indicator Shows The Current Voltage Of The Vehicle, Below 12V, Is Low Voltage, Please Replace The Battery As Soon As Possible. The Switch Is Designed To Reduce Power Consumption And Can Be Turned Off Or On At Any Time To Charge Your Device..
Easy To Install - Equipped With Mounting Accessories For Different Environments, You Can Not Only Use The Round Handlebar Mount Bracket To Mount On The Handlebar Of Your Motorcycle Or Bicycle But Also Use The Mounting Tabs And Screws To Fix It To Any Position Of Your Vehicle.(Tips: Handlebar Installation For Handlebar Diameter Of 1.9 -2.2Cm / 0.75-0.87Inch).
Features
- QC & PD Motorcycle USB Charger - This motorcycle phone charger has upgraded PD 3.0 (20W) & QC 3.0 (24W) fast charging systems, distinguishing it from ordinary car chargers by bringing faster charging support up to 24W of charging power from a single USB-A port and 20W of charging power from a single USB-C port, significantly increasing the efficiency of charging.
- Easy To Install - Equipped with mounting accessories for different environments, you can not only use the round handlebar mount bracket to mount on the handlebar of your motorcycle or bicycle but also use the mounting tabs and screws to fix it to any position of your vehicle.(Tips: Handlebar installation for handlebar diameter of 1.9 -2.2cm / 0.75-0.87inch)
- Smart Chip - The motorcycl USB charger is equipped with an advanced smart chip that detects the voltage of the battery, automatically adjusts the power output according to the connected devices plugged in to maximize charging, and provides wiring protection to allow for a safe charging environment.
- LED Indicator And Switch - The red LED indicator shows the current voltage of the vehicle, below 12V, is low voltage, please replace the battery as soon as possible. The switch is designed to reduce power consumption and can be turned off or on at any time to charge your device.
- Universal Compatibility - The motorcycle USB charger input voltage is (12V-24V). It can automatically adjust the voltage output according to your device (USB-A: 5V/3.4A, 9V/2.5A, 12V/1.5A TYPE-C:5V/3A 9V/3A 12V/2.5A).Widely used in cell phones, ipads, USB lights and other electronic devices.
- Package Included - 1 x motorcycle phone charger (including user manual & mounting accessories). We offer an 18- month worry-free warranty and 24/7 friendly customer service.
- See more on Amazon...
Brand: RANDPOW | Manufacturer: RANDPOW
Warranty: 18 Months Warranty
See On Amazon Similar To RANDPOW Motorcycle Phone Charger 6.4A
#1
EXTRACTME Motorcycle USB Charger, 6.8A Quick Charge 3.0 Dual USB Motorcycle Phone Charger with Voltmeter & ON/Off Switch, Waterproof Quick Disconnect SAE to USB Adapter for Phone, Tablet, GPS
Asin: B093CY6887
Motorcycle Sae To Usb Charger - The Product Is Designed With One Sae Interface, Which Can Be Used Directly With The Original Sae Interface, Also Equipped With A 10A Fuse Sae To Ring Terminal Harness, Which Can Be Directly Connected To The Battery, Making The Installation More Convenient..
Package Included - One Set Motorcycle Phone Charger (Including User Manual)..
Led Voltmeter & On/Off Switch - The Motorcycle Charger Has An Independent Switch Button And An On/Off Switch, So You Will Know The Battery's Health While Driving. Monitories The Battery And Electrical System Automatically And Indicate The Voltage On The Screen, To Avoid Power Consumption, Easy To Use. (Tips: Please Replace The Battery As Soon As Possible If The Voltage Is Lower Than 12V).
Wide Compatibility - The Motorcycle Usb Charger Input Voltage Is (12V-24V). According To Your Devices, It Can Automatically Adjust The Voltage Output (5V/3.4A, 9V/2.5A, 12V/2A), It's Fully Compatible With All The Usb Interface Electronic Products..
Safe & Reliable - Built With High-Grade Abs Materials Against Scratching. Intelligent Ic Technology To Maximize The Charging Efficiency, 2 Port Usb A Motorcycle Phone Charger With Strict Control Tests Ensures Safe Charging. It Offers A Great Protection System Against Short-Circuiting, Over-Heating, Over-Current, And Over-Charging..
Quick Installation - Two Types Of Installation, Handlebar Mounting, And Screw Mounting, Can Meet Most Of The Models On The Market Installation Use. (Handlebar Installation For Handlebar Diameter Of 1.9-2.2Cm / 0.75-0.87Inch).
Features
- Dual Fast Charging Motorcycle USB Charger - The motorcycle phone charger is equipped with 24W USB-A (Quick Charge 3.0) dual port. You are charging a phone or up to 50% capacity in just 30 mins. You can charge two devices at the same time.
- Quick Installation - Two types of installation, handlebar mounting, and screw mounting, can meet most of the models on the market installation use. (Handlebar installation for handlebar diameter of 1.9-2.2cm / 0.75-0.87inch)
- Motorcycle SAE to USB charger - The product is designed with one SAE interface, which can be used directly with the original SAE interface, Also equipped with a 10A fuse SAE to ring terminal harness, which can be directly connected to the battery, making the installation more convenient.
- Safe & Reliable - Built with high-grade ABS materials against scratching. Intelligent IC technology to maximize the charging efficiency, 2 Port USB A motorcycle phone charger with strict control tests ensures safe charging. It offers a great protection system against short-circuiting, over-heating, over-current, and over-charging.
- LED Voltmeter & ON/OFF Switch - The motorcycle charger has an independent switch button and an on/off switch, so you will know the battery's health while driving. Monitories the battery and electrical system automatically and indicate the voltage on the screen, to avoid power consumption, easy to use. (TIPS: Please replace the battery as soon as possible if the voltage is lower than 12V)
- Wide Compatibility - The motorcycle USB charger Input Voltage is (12V-24V). According to your devices, it can automatically adjust the voltage output (5V/3.4A, 9V/2.5A, 12V/2A), It's fully compatible with all the USB interface electronic products.
- Package Included - One set motorcycle phone charger (including user manual).
- See more on Amazon...
Brand: EXTRACTME | Manufacturer: EXTRACTME
Warranty: 18 Months Warranty
See On Amazon #2
Battery Tender Quick Disconnect USB Charger Adapter - Charge Mobile Devices with 12V Vehicle Battery on The Go - 081-0158
Asin: B00DJ5KEF4 | Model: 081-0158 | PartNumber: 081-0158 | Ean: 0706084234446, 0734357815801, 7262318507920 | UPC: 706084234446, 734357815801
Designed For Use On Most 12 Volt Batteries - Motorcycles, Golf Carts, Atvs, And More.
Input: 12V, Output: 2.1 Amp Usb.
Suggested Compatibility With Battery Tender Ring Terminal Accessory Cable.
Leave Connected To Your Vehicle’S Battery Via The Quick Disconnect Cable For Charging On The Go.
Features
- Easily charge your USB-connected mobile devices with your 12V battery
- Leave connected to your vehicle s battery via the Quick Disconnect Cable for charging on the go
- Designed for use on most 12 volt batteries - motorcycles, golf carts, ATVs, and more
- Suggested compatibility with Battery Tender Ring Terminal Accessory Cable
- Input: 12V, Output: 2.1 AMP USB
- See more on Amazon...
First Available: 03/21/2014
Brand: Battery Tender | Manufacturer: Battery Tender
Dimensions: 5.00 x 5.50 x 1.00 inches | Weight: 0.00 pounds
Warranty: Manufacturer Warranty
See On Amazon #3
MOTOPOWER MP0609A 3.1Amp Motorcycle USB Port Kit SAE to USB Adapter On Motorcycle
Asin: B01DYE54LI | Model: MP0609A | PartNumber: MP0609A | Ean: 0711081272100, 0709046785130 | UPC: 711081272100, 709046785130
🔥【Multiple Mounting Options】- With Multiple Mounting Design, It Can Be Mounted To Amost Any Surface With Tape, Zip Ties Or Screws ( Hardware Not Included).
🔥【One Year Warranty & 100% Satisfaction Service & Hassle-Free Return Or Refund】- Extended One Year Warranty From The Purchase Date. To Activate The Warranty, Please *** Contact Seller Customer Service Team *** Directly For Any Product Issue.Our Professional Customer Service Team Will Provide Any Technical Assistance And Hassle-Free Return Or Refund Service. 100% Satisfaction Service For You..
🔥【Double-Layer Housing Crafts】- Inner Housing Made Of Durable And Fire-Resistant Polycarbonate Material For Safety And Ventilation.Outside Housing Made Of Soft Polyvinyl Chloride Material By Seamless Injection Outside Of The Inner Housing To Protect The Unit Against Dust And Water..
🔥【Waterproof Cap Protection】- Waterproof Cap Included To Protect Internal Circuit. Make Sure Keep The Cap On When Raining To Protect The Electrical System. Suggest Setting The Usb Port Downwards To Prevent Water Inside Of The Port..
Features
- Universal Application - Input Voltage: 12-24V; Output: 5V, 3.1Amp. It can charge just about any phone, Tablet, GPS, camera, etc. With the SAE quick release connection design, it can work directly with your exsiting SAE pigtails on your bikes. Also the 7.5Amp fused SAE to Ring Terminal cable included in the kit can work with your battery chargers or maintainers to charge the battery conveniently.
- Waterproof Cap Protection - Waterproof cap included to protect internal circuit. Make sure keep the cap on when raining to protect the electrical system. Suggest setting the USB port downwards to prevent water inside of the port.
- Multiple Mounting Options - With multiple mounting design, it can be mounted to amost any surface with tape, zip ties or screws ( hardware not included)
- Double-layer Housing Crafts - Inner housing made of durable and fire-resistant Polycarbonate material for safety and ventilation.Outside housing made of soft Polyvinyl chloride material by seamless injection outside of the inner housing to protect the unit against dust and water.
- One Year Warranty & 100% Satisfaction Service & Hassle-free Return or Refund - Extended one year warranty from the purchase date. To activate the warranty, please *** contact seller customer service team *** directly for any product issue.Our professional customer service team will provide any technical assistance and hassle-free return or refund service. 100% satisfaction service for you.
- See more on Amazon...
Brand: MOTOPOWER | Manufacturer: MOTOPOWER
Dimensions: 0.90 x 1.80 x 1.00 inches | Weight: 0.05 pounds
See On Amazon #4
MOTOPOWER MP0609C 3.1Amp Waterproof Motorcycle Dual USB Charger Kit SAE to USB Adapter Cable Phone Tablet GPS Charger (SAE to Dual USB Adapter)
Asin: B06XWW2TRT | Model: MP0609C | PartNumber: MP0609C | Ean: 0709046785024 | UPC: 709046785024
✅【Quick Installation】- Multiple Mounting Options - It Can Be Mounted To Amost Any Surface With Tape, Zip Ties Or Screws ( Hardware Not Included).
✅【Energy-Save】- With The Upgraded Sleep Mode, It Will Not Drain Any Power From The Battery If No Usb Devices In Charing. It Can Be Connected With The Power For Long Time Without Battery Drain. Keep The Cap On When Not In Use To Prevent Dust In..
✅【Multi-Level Safety Protection & Waterproof】- Safety Design Against Over-Current, Over-Voltage, Over-Temperature And Reverse Connection. Waterproof - Fully Gluded Pcba Without Any Worry Of Water Damage [ Ip68 ].
✅【Easy Operation】- Standard Sae Quick Release Connection Complying With Most Brands Of Sae Cables. ***The Fused Ring Terminal Harness Is Not Included.*** Use Your Existing Fused Sae Harness To Connect The Usb Charger With The Power Source For Safe Operation..
Features
- Universal Capability - Input Voltage: 12-24V; Output: 5V, 3.1Amp. It can charge just about any phone, Tablet, GPS, camera, etc.
- Easy Operation - Standard SAE quick release connection complying with most brands of SAE cables. ***The fused ring terminal harness is not included.*** Use your existing fused sae harness to connect the usb charger with the power source for safe operation.
- Quick Installation - Multiple Mounting Options - it can be mounted to amost any surface with tape, zip ties or screws ( hardware not included)
- Multi-level Safety Protection & Waterproof - Safety design against over-current, over-voltage, over-temperature and reverse connection. WATERPROOF - Fully gluded PCBA without any worry of water damage [ IP68 ]
- Energy-Save - With the upgraded sleep mode, it will not drain any power from the battery if no usb devices in charing. It can be connected with the power for long time without battery drain. Keep the cap on when not in use to prevent dust in.
- See more on Amazon...
Brand: MOTOPOWER | Manufacturer: MOTOPOWER
Dimensions: 1.16 x 2.05 x 0.87 Inches | Weight: 0.24 pounds
Warranty: 2 year manufacturer
See On Amazon #5
EXTRACTME Motorcycle Phone Charger, 6.4A Dual USB Type C PD & Quick Charge 3.0 Motorcycle USB Charger with Voltmeter & ON/Off Switch, Waterproof Motorcycle Accessories for Phone, Tablet, GPS, etc
Asin: B0BGGNYX1Y
Motorcycle Sae To Usb Charger - The Product Is Designed With One Sae Interface, Which Can Be Used Directly With The Original Sae Interface, Also Equipped With A 10A Fuse Sae To Ring Terminal Harness, Which Can Be Directly Connected To The Battery, Making The Installation More Convenient..
Package Included - One Set Motorcycle Phone Charger (Including User Manual)..
Safe & Reliable - Built With High-Grade Abs Materials Against Scratching. Intelligent Ic Technology To Maximize Charging Efficiency, 2 Port Usb C+A Motorcycle Phone Charger With Strict Control Tests Ensures Safe Charging And Offers A Great Protection System Against Short Circuiting, Over-Heating, Over-Current And Over-Charging..
Wide Compatibility - The Motorcycle Usb Charger Input Voltage Is (12V-24V). It Can Automatically Adjust The Voltage Output According To Your Device (Usb-A: 5V/3.4A, 9V/2.5A, 12V/1.5A Type-C:5V/3A 9V/3A 12V/2.5A), It's Fully Compatible With Ipad, Iphone, Ipod, Htc, Galaxy, Blackberry, Digital Cameras, Pdas, Mp3 Players, Mobile Phones, And Gps (Tips: Keep The Button On While Charging).
Led Voltmeter & On/Off Switch - The Motorcycle Charger Is Equipped With An Independent Switch Button And An On/Off Switch, You Will Know The Health Of The Battery While Driving. Monitories The Battery And Electrical System Automatically And Indicate The Voltage On The Screen, To Avoid Power Consumption, Easy To Use. (Tips: Please Replace The Battery As Soon As Possible If The Voltage Is Lower Than 12V).
Quick Installation - Two Types Of Installation, Handlebar Mounting, And Screw Mounting, Can Meet Most Of The Models On The Market Installation Use.(Handlebar Installation For Handlebar Diameter Of 1.9-2.2Cm / 0.75-0.87Inch).
Features
- Dual Fast Charging Motorcycle USB Charger - Upgraded motorcycle phone charger is equipped with a 30W USB-C (PD Power Delivery) and 18W USB-A (Quick Charge 3.0) dual port. You are charging a USB Type-C phone or up to 50% capacity in just 30 mins. You can charge two devices at the same time.
- Quick Installation - Two types of installation, handlebar mounting, and screw mounting, can meet most of the models on the market installation use.(Handlebar installation for handlebar diameter of 1.9-2.2cm / 0.75-0.87inch)
- Motorcycle SAE to USB charger - The product is designed with one SAE interface, which can be used directly with the original SAE interface, Also equipped with a 10A fuse SAE to ring terminal harness, which can be directly connected to the battery, making the installation more convenient.
- LED Voltmeter & ON/OFF Switch - The motorcycle charger is equipped with an independent switch button and an on/off switch, you will know the health of the battery while driving. Monitories the battery and electrical system automatically and indicate the voltage on the screen, to avoid power consumption, easy to use. (TIPS: Please replace the battery as soon as possible if the voltage is lower than 12V)
- Safe & Reliable - Built with high-grade ABS materials against scratching. Intelligent IC technology to maximize charging efficiency, 2 Port USB C+A motorcycle phone charger with strict control tests ensures safe charging and offers a great protection system against short circuiting, over-heating, over-current and over-charging.
- Wide Compatibility - The motorcycle USB charger input voltage is (12V-24V). It can automatically adjust the voltage output according to your device (USB-A: 5V/3.4A, 9V/2.5A, 12V/1.5A TYPE-C:5V/3A 9V/3A 12V/2.5A), It's fully compatible with iPad, iPhone, iPod, HTC, Galaxy, Blackberry, Digital Cameras, PDAs, MP3 Players, Mobile Phones, and GPS (TIPS: keep the button on while charging)
- Package Included - One set motorcycle phone charger (including user manual).
- See more on Amazon...
Brand: EXTRACTME | Manufacturer: EXTRACTME
Weight: 0.33 Pounds
Warranty: 18 Months Warranty
See On Amazon #6
YONHAN Motorcycle Phone Charger 4.8A, SAE to USB Adapter with Voltmeter & ON/Off Switch, Dual USB Quick Charge 3.0 USB Charger Waterproof Motorcycle Accessories for Phone, Tablet, GPS, etc
Asin: B072JM3NWG | Model: GSG2016P-4.2A | PartNumber: GSG2016P-4.2A | Ean: 0602191594858 | UPC: 602191594858
[Waterproof Design] Water And Dust Resistance By A Rubber Usb Cover, You Can Close The Cap To Keep Usb Port Away From Light Rain & Dust, Protects The Internal Circuit, And Effectively Enhances Its Lifespan. Note For Continuous Heavy Rain, Please Turn The Switch Off, And After Raining Make Sure Usb Port Was Dry Then Turn It On Again..
[Three Ways For Installation] The Motorcycle Usb Phone Charger's Innovative On/Off Switch And Equipped With An Sae Extension Cable ( 40Inch); Three Install Options(See Image 4), You Can Install The Sae To Usb Adapter On The Handlebar Or Anywhere Else On The Motorcycle By Fixed Module/Zip Ties/Screw, Meet Your Different Needs For Installation..
[Sae To Usb Adapter] Sae To Usb Adapter Motorcycle Usb Phone Charger, Input: 12Volt, Output: 5V3.4A For Both Usb Port. Smart Ic Adjust The Output Electricity For Your Device Automatic. Ce & Rohs Certified, Display The Current Detected By The Intelligent Circuitry While Charging. Intelligent Circuit Design Protects Against Excessive Current, Overheating, And Overcharging..
[Led Voltage Display] The Sae Adapter Has A Built-In Voltmeter. Monitories The Battery And Electrical System Automatically And Indicates The Voltage On The Screen, You Will Know The Health Of The Battery While Driving. Please Pay Attention When The Voltage Is Under 12V. The Upgraded Display, With Soft Led Blue Light Without Glare, Would Not Interfere With Your Sight..
Features
- [Dual USB Port Fast Charger] The motorcycle power outlet comes with dual USB plugs, output 5V/2.4A & 5V/2.4A, lets you charge any two smartphones or tablet devices simultaneously, at top speed, such as iPhone, GPS, Camera, digital cameras, or any Smartphone or device that may be charged via USB.
- [LED Voltage Display] The SAE adapter has a built-in voltmeter. Monitories the battery and electrical system automatically and indicates the voltage on the screen, you will know the health of the battery while driving. Please pay attention when the voltage is under 12V. The upgraded display, with soft LED blue light without glare, would not interfere with your sight.
- [Waterproof Design] Water and dust resistance by a rubber USB cover, you can close the Cap to keep USB Port Away From Light rain & DUST, protects the internal circuit, and effectively enhances its lifespan. NOTE for Continuous heavy rain, Please Turn the Switch Off, And After Raining Make Sure USB Port Was Dry then Turn it on Again.
- [SAE to USB Adapter] SAE to USB Adapter Motorcycle USB phone Charger, Input: 12volt, Output: 5V3.4A for Both USB Port. Smart IC Adjust the output Electricity for your Device Automatic. CE & ROHS certified, display the current detected by the intelligent circuitry while charging. Intelligent circuit design protects against excessive current, overheating, and overcharging.
- [Three Ways for Installation] The Motorcycle USB phone Charger's innovative ON/OFF switch and Equipped with an SAE Extension Cable ( 40inch); Three install options(see image 4), You Can Install the SAE to USB Adapter on the Handlebar or anywhere else on the motorcycle By Fixed module/Zip ties/Screw, meet your different needs for installation.
- See more on Amazon...
Brand: YONHAN | Manufacturer: YONHAN
Dimensions: 0.81 x 3.40 x 1.10 Inches | Weight: 2.40 ounces
See On Amazon #7
iMESTOU Motorcycle Wireless 15W Qi/USB Quick Charger 3.0 Phone Holder 2 in 1 Mount on 22-32mm Handlebar or Rear-View Mirror Fast Charging for 3.5-6.8 inch Cellphones
Asin: B082SQFV98 | Model: M11A | PartNumber: M11A | Ean: 0743829431562 | UPC: 743829431562
✈One-Handed Operation + Place/ Get Out Of Your Phone Just In One Second!--- As Soon As The Telescopic Modules On Two Sides Pushed In, The Motorbike Phone Holder Automatically Released; The Moment Your Phone Placed On The Bracket, The Sensing Point Pressed By It In The Center, Phone Tightly Locked In One Second!.
✈Wide Compatibility : Wireless Charging For Iphone X/8/8+/Xs/Xs Max/11/11 Pro/11 Pro Max/ Galaxy S9/S9+/S8+/S8/S7/S7 Edge/Huawei Mate Rs/P30 Pro/ Mate 30 Pro/Mate 30/ Xiaomi Etc. With Wireless Charging Function; Qc. Quick Charging Usb 3.0 For Phones With Qualcomm Quick Charge Protocol. Eg. Iphone Xs/Xs Max/Xr/8/8P/ Samsung S9/S9+/S8/S8+/ Huawei /More...; Normal Usb Charging Speed For All Android Mobile Phones..
✈Two Installing Ways + 360 Degree Freely Rotation + Waterproof Design --- Available For Installation Both On Motorcycle Handlebars And Rear-View Mirror Base; 360 Degree Rotating To Suit Any Angles As You Need; Overall Sealed Design With Switch And Usb Port With Waterproof Cap To Make Your Riding Easily Even In Rainy Days!.
✈ Never Dropping For Mechanical Locking--- The Moment Phone Placed On The Motorcycle Phone Holder, It Tightly Locked By The Clamp Arms Automatically To Make Phone Stably Charged On The Phone Mount; 4-Corner Entirely Wrapping Design Makes It Impossible To Shake Off From The Motorcycle Phone Bracket Even On Rocky Roads-- Never Dropped! 100% Safe And Reliable!.
Features
- Qi Wireless 15W +USB Quick Charger 2 in 1 Design---wireless charger 15W super power and QC.3.0 USB quick charger FREELY SWITCH MODE fast charges for most of 3.5-6.5 inch cellphones; built-in upgraded integrated big circuit to fasten the charging speed and lengthen the sensing distance --- 8mm wireless sensing distance makes mobiles even with phone cases to be charged normally; internal new intelligent power managing chip to make 0.1s super fast automatic identified charging for iPhone/Android;
- Never Dropping for Mechanical Locking--- the moment phone placed on the motorcycle phone holder, it tightly locked by the clamp arms automatically to make phone stably charged on the phone mount; 4-corner entirely wrapping design makes it impossible to shake off from the motorcycle phone bracket even on rocky roads-- Never Dropped! 100% Safe and Reliable!
- One-handed operation + Place/ Get Out of Your Phone Just in One Second!--- As soon as the telescopic modules on two sides pushed in, the motorbike phone holder automatically released; the moment your phone placed on the bracket, the sensing point pressed by it in the center, phone tightly locked in one second!
- Two Installing Ways + 360 Degree Freely Rotation + Waterproof Design --- Available for installation both on motorcycle handlebars and rear-view mirror base; 360 degree rotating to suit any angles as you need; overall sealed design with switch and USB port with waterproof cap to make your riding easily even in rainy days!
- Wide Compatibility : wireless charging for iPhone X/8/8+/XS/XS Max/11/11 Pro/11 Pro Max/ Galaxy S9/S9+/S8+/S8/S7/S7 edge/HUAWEI Mate RS/P30 Pro/ Mate 30 Pro/Mate 30/ XIAOMI etc. with wireless charging function; QC. quick charging USB 3.0 for phones with Qualcomm Quick Charge Protocol. eg. iPhone XS/XS Max/XR/8/8P/ Samsung S9/S9+/S8/S8+/ HUAWEI /more...; normal USB charging speed for all android mobile phones.
- See more on Amazon...
Brand: iMESTOU | Manufacturer: iMESTOU
Dimensions: 1.18 x 5.31 x 2.76 Inches | Weight: 0.80 pounds
See On Amazon #8
EXTRACTME 6.4A Motorcycle USB Charger, Total 44W Dual USB Type C PD & Quick Charge 3.0 Motorcycle Phone Charger with Voltmeter & ON/Off Switch, Waterproof Motorcycle Accessories SAE to USB Adapter
Asin: B09HH7NHQ4 | Ean: 0602262993542 | UPC: 602262993542
Motorcycle Sae To Usb Charger - The Product Come With One Sae Interface, Which Can Be Used Directly With The Original Sae Interface, Also Equipped With A 10A Fuse Sae To Ring Terminal Harness, Which Can Be Directly Connected To The Battery, Making The Installation More Convenient..
Quick Installation - Two Types Of Installation, Handlebar Mounting, And Screw Mounting, Can Meet Most Of The Models On The Market Installation Use.(Handlebar Installation For Handlebar Diameter Of 1.9-2.2Cm / 0.75-0.87Inch).
Led Voltmeter & On/Off Switch - The Motorcycle Usb Charger Adopts An Independent Switch Button And An On/Off Switch, Monitories The Battery And Electrical System Automatically And Indicate The Voltage On The Screen, To Avoid Power Consumption, Easy To Use. (Tips: Please Replace The Battery As Soon As Possible If The Voltage Is Lower Than 12V).
Superior Safety With Multi Protection - Certified By Multiple Safety Certifications And A Built-In Smart Chip, The Car Charger With An Intelligent Control Chip Offers Multiple Protection Against Overcurrent, Short-Circuit, Overvoltage, Under-Voltage, Over-Temperature, And Overpower Protection, Which Will Guard The Safety Of Your Devices.
Features
- PD 20W & QC 24W Dual Port Fast Charge - This motorcycle phone charger is equipped with PD 3.0 (20W) & QC 3.0 (24W) dual-port to maximize your device's high output. Fast charging all prevailing phones at the same time.
- Superior Safety with Multi Protection - Certified by multiple safety certifications and a built-in smart chip, the car charger with an intelligent control chip offers multiple protection against overcurrent, short-circuit, overvoltage, under-voltage, over-temperature, and overpower protection, which will guard the safety of your devices
- Motorcycle SAE to USB charger - The product come with one SAE interface, which can be used directly with the original SAE interface, Also equipped with a 10A fuse SAE to ring terminal harness, which can be directly connected to the battery, making the installation more convenient.
- LED Voltmeter & ON/OFF Switch - The motorcycle USB charger adopts an independent switch button and an on/off switch, Monitories the battery and electrical system automatically and indicate the voltage on the screen, to avoid power consumption, easy to use. (TIPS: Please replace the battery as soon as possible if the voltage is lower than 12V)
- Quick Installation - Two types of installation, handlebar mounting, and screw mounting, can meet most of the models on the market installation use.(Handlebar installation for handlebar diameter of 1.9-2.2cm / 0.75-0.87inch)
- See more on Amazon...
Brand: EXTRACTME | Manufacturer: EXTRACTME
Dimensions: 0.98 x 3.94 x 1.38 inches | Weight: 0.40 Pounds
See On Amazon #9
BRCOVAN Motorcycle Phone Mount with Qi 15W Wireless Charger & USB C 20W Fast Charging Port, Waterproof Motorcycle Cell Phone Holder Cradle with Aluminum Alloy Handlebar Mounting Base for 4"-8" Phone
Asin: B098B2PRZJ | Model: M9S | PartNumber: M9S | Ean: 0613965492034 | UPC: 613965492034
▶ Sturdy And Safe: This Motorcycle Cell Phone Mount Main Body Made Of Pa66+Gf30% Material. Equipped With 6061-T6 Aluminum Alloy Handlebar Mounting Base. Built-In With Shockproof Soft Silicone. Features A Mechanical Knob Locking Designed. For Durability And Reliability In The Most Demanding Environments..
▶ Wide Compatibility: The Motorcycle Handlebar Cell Phone Mount Compatible With 4'' - 8'' Cellphones. The Motorcycle Phone Holder Handlebar Mounting Base Fit For Handlebars 0.5''(12Mm) / 0.87''(22Mm) / 1.0''(25.4Mm) / 1.26'' (32Mm) In Diameter. Suitable For Installation On Bicycle, Motorcycle, Electric Scooter, Dirt Bike, Atv, Etc..
▶ Ip66 Waterproof: The Internal Circuit Of The Motorcycle Phone Charger Mount Features A Completely Enclosed Designed. Equipped With Waterproof On/Off Switch And Indicator Light. The Usb C Port Come With Protective Cover. Protect Your Phone Holder When Riding On Rainy Days..
▶ Flexible Design: Our Motorcycle Phone Holder Usb C Port Can Be Connect To Power Bank Or Usb Socket As Input. When Getting Power In This Way, You Can Charge Smartphones Through Wireless Charger Only. Usb C Port Input: 5V/9V/12V. Note That The Usb C Port Is Not Allowed To Connect To The Pd Type C Socket To Get Power..
Features
- When connect to motorcycle battery as power input: The Motorcycle phone mount Qi 15W wireless charger & USB C 20W fast charging port both work well. Support charging two compatible devices at the same time. Allows to connect to the vehicle battery of DC 12V-24V. Wireless charger compatible with Qi 15W/10W/7.5W/5W wireless charging modes on the market. USB C port output: 5V/3A, 9V/2A, 12V/1.5A.
- Flexible design: Our motorcycle phone holder USB C port can be connect to power bank or USB socket as input. When getting power in this way, you can charge smartphones through wireless charger only. USB C Port input: 5V/9V/12V. Note that the USB C port is not allowed to connect to the PD Type C socket to get power.
- Sturdy and safe: This motorcycle cell phone mount main body made of PA66+GF30% material. Equipped with 6061-T6 aluminum alloy handlebar mounting base. Built-in with shockproof soft silicone. Features a mechanical knob locking designed. For durability and reliability in the most demanding environments.
- IP66 waterproof: The internal circuit of the motorcycle phone charger mount Features a completely enclosed designed. Equipped with waterproof ON/OFF switch and indicator light. The USB C port come with protective cover. Protect your phone holder when riding on rainy days.
- Wide compatibility: The motorcycle handlebar cell phone mount Compatible with 4'' - 8'' cellphones. The motorcycle phone holder handlebar mounting base fit for handlebars 0.5''(12mm) / 0.87''(22mm) / 1.0''(25.4mm) / 1.26'' (32mm) in diameter. Suitable for installation on bicycle, motorcycle, electric scooter, dirt bike, ATV, etc.
- See more on Amazon...
Brand: BRCOVAN | Manufacturer: BRCOVAN
Weight: 0.68 pounds
See On Amazon #10
EXTRACTME Motorcycle USB Charger, Upgraded 6.4A Quick Charge 3.0 & Type C PD Dual Phone Charger with Voltmeter, Waterproof Motorcycle Accessories for Phone, Tablet, GPS, etc
Asin: B0BJCYCCG7
Quick Installation - Two Types Of Installation, Handlebar Mounting, And Screw Mounting, Can Meet Most Of The Models On The Market Installation Use.(Handlebar Installation For Handlebar Diameter Of 1.9-2.2Cm / 0.75-0.87Inch).
Motorcycle Sae To Usb Charger - The Product Come With One Sae Interface, Which Can Be Used Directly With The Original Sae Interface, Also Equipped With A 10A Fuse Sae To Ring Terminal Harness, Which Can Be Directly Connected To The Battery, Making The Installation More Convenient..
Universal Compatibility - The Motorcycle Usb Charger Input Voltage Is (12V-24V). It Can Automatically Adjust The Voltage Output According To Your Device (Usb-A: 5V/3.4A, 9V/2.5A, 12V/1.5A Type-C:5V/3A 9V/3A 12V/2.5A), It's Fully Compatible With Ipad, Iphone, Ipod, Htc, Galaxy, Blackberry, Digital Cameras, Pdas, Mp3 Players, Mobile Phones, And Gps (Tips: Keep The Button On While Charging).
Superior Safety With Multi Protection - Certified By Multiple Safety Certifications And A Built-In Smart Chip, The Extractme Car Charger With An Intelligent Control Chip Offers Multiple Protection Against Overcurrent, Short-Circuit, Overvoltage, Under-Voltage, Over-Temperature, And Overpower Protection, Which Will Guard The Safety Of Your Devices. Water And Dust Resistance Usb Cover, Protects Internal Circuit, Effectively Enhance Its Lifespan..
Blue Led Voltmeter & On/Off Switch - The Motorcycle Usb Charger Adopts An Independent Switch Button And An On/Off Switch, So You Will Know The Health Of The Battery While Driving. Monitories The Battery And Electrical System Automatically And Indicate The Voltage On The Screen, To Avoid Power Consumption, Easy To Use. (Tips: Please Replace The Battery As Soon As Possible If The Voltage Is Lower Than 12V).
Features
- PD 20W & QC 24W Dual Port Fast Charge - This motorcycle phone charger is equipped with PD 3.0 (20W) & QC 3.0 (24W) dual-port to maximize your device's high output. Fast charging all prevailing phones at the same time. The charging speed is 4 times faster than the original 5W Charger.
- Blue LED Voltmeter & ON/OFF Switch - The motorcycle USB charger adopts an independent switch button and an on/off switch, so you will know the health of the battery while driving. Monitories the battery and electrical system automatically and indicate the voltage on the screen, to avoid power consumption, easy to use. (TIPS: Please replace the battery as soon as possible if the voltage is lower than 12V)
- Quick Installation - Two types of installation, handlebar mounting, and screw mounting, can meet most of the models on the market installation use.(Handlebar installation for handlebar diameter of 1.9-2.2cm / 0.75-0.87inch)
- Superior Safety with Multi Protection - Certified by multiple safety certifications and a built-in smart chip, the Extractme car charger with an intelligent control chip offers multiple protection against overcurrent, short-circuit, overvoltage, under-voltage, over-temperature, and overpower protection, which will guard the safety of your devices. Water and dust resistance USB cover, protects internal circuit, effectively enhance its lifespan.
- Motorcycle SAE to USB charger - The product come with one SAE interface, which can be used directly with the original SAE interface, Also equipped with a 10A fuse SAE to ring terminal harness, which can be directly connected to the battery, making the installation more convenient.
- Universal Compatibility - The motorcycle USB charger input voltage is (12V-24V). It can automatically adjust the voltage output according to your device (USB-A: 5V/3.4A, 9V/2.5A, 12V/1.5A TYPE-C:5V/3A 9V/3A 12V/2.5A), It's fully compatible with iPad, iPhone, iPod, HTC, Galaxy, Blackberry, Digital Cameras, PDAs, MP3 Players, Mobile Phones, and GPS (TIPS: keep the button on while charging)
- See more on Amazon...
Brand: EXTRACTME | Manufacturer: EXTRACTME
Dimensions: 2.17 x 4.72 x 3.15 Inches | Weight: 0.40 pounds
Warranty: 18 Months Warranty
See On Amazon #11
BlueFire 5V/3A Dual USB Charger Socket Waterproof Motorcycle Handlebar & Rear View Mirror Clamp Power Adapter Charger with Cigarette Lighter Socket, Voltmeter for Phones/Tablets/GPS (Black 1)
Asin: B07GKR2F6Q | Model: 2699006696 | PartNumber: 2699006696
The Bottom Of Cigarette Lighter Socket Is Ceramic Heat Insulation Material, Cigarette Lighter Butt Is Free, Can Be Used For Cigarette Lighter..
Digital Voltage Display Helps To Monitor Vehicle's Electrical Safety And The 4.75 Feet Long (1.45 Meters) Cable With Built-In Fuse Ensure Great Safety And Reliability..
It Comes With A Waterproof & Dust-Proof Cover, Which Is Fully Competent For Outdoor Usage(Tip: Cover The Product Cover Can Play A Waterproof Role, Open The Cover Will Be A Problem Because Of Water Inside The Product)..
Including Dual Usb Charger, Cigarette Lighter Socket, Voltmeter, Clock, Charger Switch, Fuse, Save More Spaces, Easier To Use And More Functional..
Features
- This USB Charger Socket is made by ABS Environmental Protection Material, which is fire-retardant, high and low temperature resistant and anti-corrosive, charging faster and more secure.
- Including Dual USB charger, cigarette lighter socket, voltmeter, clock, Charger switch, fuse, save more spaces, easier to use and more functional.
- The bottom of cigarette lighter socket is ceramic heat insulation material, cigarette lighter butt is free, can be used for cigarette lighter.
- It comes with a waterproof & dust-proof cover, which is fully competent for Outdoor Usage(Tip: Cover the product cover can play a waterproof role, open the cover will be a problem because of water inside the product).
- Digital voltage display helps to monitor vehicle's electrical safety and the 4.75 feet long (1.45 meters) cable with built-in fuse ensure great safety and reliability.
- See more on Amazon...
Brand: BlueFire | Manufacturer: BlueFire
Weight: 0.50 pounds
Warranty: 1 Year
See On Amazon #12
Ankuee Motorcycle USB Phone Charger, Waterproof SAE to USB Adapter with Voltmeter & ON/Off Switch, Dual USB Quick Charge 3.0 Charger, Motorcycle Accessories for Phone, Tablet, GPS, etc (Blue)
Asin: B0C713PMB8 | Model: Motorcycle USB Phone Charger | PartNumber: Motorcycle USB Phone Charger
【Led Voltage Meter】: The Charger Is Equipped With An Independent On/Off Button Switch, Which Is Ready To Use And Easy To Use. Led Voltage Display, You Can Know The Health Of The Battery While Driving, Automatically Monitor The Battery And Electrical System, And Indicate The Voltage On The Screen To Avoid Power Consumption..
【Wide Compatibility】: Input Voltage Is 12V-24V. It Can Automatically Adjust The Voltage Output According To Your Device (Usb-A: 5V/3.4A, 9V/2.5A, 12V/1.5A Type-C: 5V/3A 9V/3A 12V/2.5A), Fully Compatible With Iphone, Htc, Galaxy, Digital Camera, Pda, Mp3 Players, Cell Phones And Gps (Hint: Keep The Button Open While Charging).
【Safe And Reliable】: The Motorcycle Charger Is Made Of Advanced Abs Material, Durable And Scratch-Resistant. Waterproof And Dustproof Cover To Effectively Protect The Internal Power Supply. Intelligent Ic Technology Maximizes Charging Efficiency And The Charger Has A Powerful Protection System To Prevent Short Circuit, Overheating, Overcurrent And Overcharging..
【Quick To Install】: Two Installation Methods, Handlebar Mounting And Screw Mounting. (Handlebar Mount For Handlebar Diameter Of 0.75-0.87 Inches) It Has An Sae Connector That Can Be Used Directly With The Original Sae Connector, And Is Also Equipped With A 10A Fuse Sae To Ring Terminal Harness For Direct Battery Connection, Very Convenient..
Features
- Dual Fast Charging : Our motorcycle USB charger is equipped with 30W USB-C (PD) and 18W USB-A (QC3.0). With dual ports, you can charge two devices at the same time. Can be installed and used on DC12-24V cars, motorcycles, beach bikes, SUVs, boats and other mobility devices.
- Quick to Install : Two installation methods, handlebar mounting and screw mounting. (handlebar mount for handlebar diameter of 0.75-0.87 inches) It has an SAE connector that can be used directly with the original SAE connector, and is also equipped with a 10A fuse SAE to ring terminal harness for direct battery connection, very convenient.
- LED Voltage Meter : The charger is equipped with an independent on/off button switch, which is ready to use and easy to use. LED voltage display, you can know the health of the battery while driving, automatically monitor the battery and electrical system, and indicate the voltage on the screen to avoid power consumption.
- Safe and Reliable : The motorcycle charger is made of advanced ABS material, durable and scratch-resistant. Waterproof and dustproof cover to effectively protect the internal power supply. Intelligent IC technology maximizes charging efficiency and the charger has a powerful protection system to prevent short circuit, overheating, overcurrent and overcharging.
- Wide Compatibility : Input voltage is 12V-24V. It can automatically adjust the voltage output according to your device (USB-A: 5V/3.4A, 9V/2.5A, 12V/1.5A TYPE-C: 5V/3A 9V/3A 12V/2.5A), fully compatible with iPhone, HTC, Galaxy, digital camera, PDA, MP3 players, cell phones and GPS (hint: keep the button open while charging)
- See more on Amazon...
Brand: Ankuee | Manufacturer: Ankuee
Dimensions: 6.00 x 5.50 x 1.30 inches
Warranty: 0.2
See On Amazon #13
iMESTOU Motorcycle Phone Mount USB Charger Handlebar/Rear-View Mirror Cellphone Holder Aluminum with 17mm Ball Works with 12/24V Motorcycles Quick Charge for 4.0-6.8 Inch Smartphones (USB Type)
Asin: B07MR7SDDG | Model: M8 | PartNumber: M8 | Ean: 0641055622412 | UPC: 641055622412
➣Universal: The Motorcycle Phone Mount Can Securely Fit For All Cellphones From 4.0 To 6.8 Inches Or Bigger With Width ≤0.43". Eg. For Iphone 5 / 5S / 6S / 6S Plus Iphone 7 / 7 Plus Iphone 8 / 8 Plus / X, Samsung Galaxy S9 / S9 Plus / S8 / S8 Plus / S7, Htc 10, Etc..
➣Premium Material And Waterproof: The Motorcycle Mobile Phone Mount Charger Made Of Auto-Grade Abs-- Strong And Durable! With Ip66 Waterproof Cover On Usb Port To Extend The Lifestyle Of Phone Holder Usb Charger..
➣With On/Off Switch And Fused: The Motorcycle Phone Mount Usb Charger Is With Power Indicator And Switch On/Off To Show The Charge State And Protect Power Drain From The Motorcycle Battery. 10A Fused To Provide Muti-Protection For This Motorcycle Usb Charge Phone Mount..
➣Two Easy Installation: It Fits Handlebar Diameter 7/8", 1", 1-1/4" For Your Motorcycle, Atv, Mopeds, Snowmobile. It Can Also Be Mounted Onto The Rear-View Mirror Base Via The Adapter In The Package..
➣100% Firm And Reliable: Made From Aluminum, The Motorcycle Phone Holder Usb Charger Can Be Mounted Most Stably On Handlebars. The Adjustable Clamping Arms Which Could Be Adjusted To Max. 90Mm Width Will Securely Hold Most 4.0"-6.8" Smartphones..
Features
- Quick Charge USB Charger: this motorcycle phone holder usb charger with fast USB charging port to keep your mobile or GPS devices charged anytime when you need. Never worry about your cell phone /GPS power off while riding! With your device mounted, you can easily access to your phone screen/ GPS and most of the functional keys. No need to unmount your smart phone! It's 100% safe to keep your hands on the handlebar!
- 100% Firm and Reliable: made from aluminum, the motorcycle phone holder USB charger can be mounted most stably on handlebars. The adjustable clamping arms which could be adjusted to max. 90mm width will securely hold most 4.0-6.8 smartphones.
- Universal: the motorcycle phone mount can securely fit for all cellphones from 4.0 to 6.8 inches or bigger with width 0.43. eg. for iPhone 5 / 5s / 6s / 6s Plus iPhone 7 / 7 Plus iPhone 8 / 8 Plus / X, Samsung Galaxy S9 / S9 Plus / S8 / S8 Plus / S7, HTC 10, etc.
- Two Easy Installation: it fits handlebar diameter 7/8, 1, 1-1/4 for your motorcycle, ATV, Mopeds, snowmobile. It can also be mounted onto the rear-view mirror base via the adapter in the package.
- Premium Material and Waterproof: the motorcycle mobile phone mount charger made of auto-grade ABS-- strong and durable! With IP66 waterproof cover on USB port to extend the lifestyle of phone holder USB charger.
- With ON/OFF Switch and Fused: the motorcycle phone mount usb charger is with power indicator and switch ON/OFF to show the charge state and protect power drain from the motorcycle battery. 10A fused to provide muti-protection for this motorcycle USB charge phone mount.
- See more on Amazon...
Brand: iMESTOU | Manufacturer: iMESTOU
Dimensions: 0.98 x 3.94 x 2.36 Inches | Weight: 0.56 pounds
See On Amazon #14
ANKBOY Motorcycle Phone Mount with Charger, Wireless Charging Qi 15W Fast Port Waterproof Mobile Holder with Switch Power Cord 360 Rotating Handlebar Mirror Mount Aluminum Alloy Phones Holder Charger
Asin: B0BN3F8Y7B | Model: Cell phone wireless charger | PartNumber: Cell phone wireless charger
360° Rotatable : Motorcycle Phone Holder Using Aluminum Alloy Handlebar Ball Holder, Tpu Covered Ball Holder With Non-Slip Performance, 2 Universal Connectors To Achieve 360 ° Free Rotation Of The Bracket, Can Have Only According To The Use Of Scenes Of Rotation Angle. Aluminum Alloy Bracket Is Strong And Corrosion-Resistant..
Packaging Details : Wireless Charging Phone Holder * 1, Phone Holder With 1.4 M Power Cord, 2 Replacement Silicone Heads, 1 * Handlebar Mounting Accessories, 1 * Rearview Mirror Mounting Accessories, 1 * Double-Headed Universal Connector, 1 * Rubber Safety Net..
Mounting Method? Motorcycle / Electric Car Phone Holder With Handlebar Mounting Accessories And Mirror Mounting Accessories, According To The Situation Can Choose To Install In The Handlebar Or Installed In The Mirror Screws. Motorcycle Phone Holder Handlebar Mounting Base Fit For Handlebars 0.87''(22Mm) / 1.0''(25.4Mm) / 1.26'' (32Mm) In Diameter. Can Be Installed On The Handlebar Or Motorcycle Mirror..
Four Jaw Mechanical Locking : The Cell Phone Holder Relies On Four Silicone Clip Arms To Lock Automatically, While Using The Safety Belt To Add A Second Level Of Security, So That The Phone Charges Steadily On The Phone Holder. 4 Corners Completely Wrapped Design Makes It Impossible To Shake Off The Motorcycle Phone Holder, Even On Bumpy Roads ---- Never Fall Off..
Features
- 2 IN 1 CHARGING DESIGN : Motorcycle phone holder with wireless charging and QI3.0 fast charging, Wireless charging automatically switch power 5W/ 7.5W/ 10W and 15W fast charging, output voltage 5V 3.4A; 9V 2.5A; Cell phone holder for 3-7 inch smartphone, internal new intelligent power managing chip to make 0.1s super fast automatic identified charging for iPhone/Android.
- FOUR JAW MECHANICAL LOCKING : The cell phone holder relies on four silicone clip arms to lock automatically, while using the safety belt to add a second level of security, so that the phone charges steadily on the phone holder. 4 corners completely wrapped design makes it impossible to shake off the motorcycle phone holder, even on bumpy roads ---- never fall off.
- 360 Rotatable : Motorcycle phone holder using aluminum alloy handlebar ball holder, TPU covered ball holder with non-slip performance, 2 universal connectors to achieve 360 free rotation of the bracket, can have only according to the use of scenes of rotation angle. Aluminum alloy bracket is strong and corrosion-resistant.
- Mounting Method? Motorcycle / electric car phone holder with handlebar mounting accessories and mirror mounting accessories, according to the situation can choose to install in the handlebar or installed in the mirror screws. motorcycle phone holder handlebar mounting base fit for handlebars 0.87''(22mm) / 1.0''(25.4mm) / 1.26'' (32mm) in diameter. Can be installed on the handlebar or motorcycle mirror.
- Packaging Details : Wireless charging phone holder * 1, phone holder with 1.4 m power cord, 2 replacement silicone heads, 1 * handlebar mounting accessories, 1 * rearview mirror mounting accessories, 1 * double-headed universal connector, 1 * rubber safety net.
- See more on Amazon...
Brand: ANKBOY | Manufacturer: ANKBOY
Weight: 1.14 pounds
See On Amazon #15
KEWIG Motorcycle Phone Mount with Qi 15W Wireless Charger & USB C 20W Fast Charging Port, One-Push Automatically Lock & Quick Release Waterproof Handlebar Phone Holder for 4.0-6.9" Phone
Asin: B09Y1J5P2Q | Model: M22-A1 | PartNumber: M22-A1
【1S Automatically Lock & Quick Release】The Motorcycle Handlebar Holder Adopts One-Push Automatically Lock And Quick Release. Just With One Hand In 1S Can Be Easy Put In Or Take Out Your Cell Phone. Let You Enjoy Your Riding..
【Easy To Install】Package Including With Handlebars Base And Rear-View Mirror Mounting Base, You Can Be According You Like To Make Phone Mount On Handlebar Or Rear-View. The Motorcycle Phone Holder Handlebar Mounting Base Fit For Handlebars 0.5''(12Mm) / 0.87''(22Mm) / 1.0''(25.4Mm) / 1.26'' (32Mm) In Diameter..
【Wide Compatibility】 With An Adjustable Design, The Body Size Of The Motorcycle Wireless Phone Holder Can Be Adjusted According To The Size Of Your Phone. The Adjustable Motorcycle Phone Mount Compatible With 4.7-6.9'' Cellphones. Suitable For Installation On Bike, Bicycle, Motorcycle, Stroller, Mountain Bike, Dirt Bike, Trek Bike, Road Bike, Golf Cart, Electric Scooter, Etc..
【Sturdy & Safe】Built-In Soft Silicone, Shockproof Protection. Adopts Aluminum Alloy Release Bar And Mounting Base, Super Sturdy. A Special Shape Design Of Motorcycle Cell Phone Holder Wrapping Four Corners Of Your Cellphones Tightly. It Ensures The Safety And Stably Charged Of Your Smart Phone Attached To The Motorcycle Handlebar Even On A Bumpy Road..
【Two Ways To Get Power】You Can Use The Sae Harness To Connect The Phone Holder To The Motorcycle Electric Door Lock Or Battery To Get Power. The Motorcycle Cell Phone Mount Can Also Be Connected To The Usb Port With Fast Charging Protocol To Obtain Power Through The Usb Harness..
Features
- Qi Wireless Charger & USB C Port Charging KEWIG motorcycle phone mount wireless charger output 15W max, compatible with Qi 15W / 10W / 7.5W / 5W wireless charging modes on the market. USB C port output 20W max. USB C port can be connect to power bank or USB socket as power input port. At this time, the power switch does not work, you can charge cellphones through wireless charger only.
- Two Ways to Get Power You can use the SAE harness to connect the phone holder to the motorcycle electric door lock or battery to get power. The motorcycle cell phone mount can also be connected to the USB port with fast charging protocol to obtain power through the USB harness.
- 1s Automatically Lock & Quick Release The motorcycle handlebar holder adopts one-push automatically lock and quick release. Just with one hand in 1s can be easy put in or take out your cell phone. Let you enjoy your riding.
- Sturdy & Safe Built-in soft silicone, shockproof protection. Adopts aluminum alloy release bar and mounting base, super sturdy. A special shape design of motorcycle cell phone holder wrapping four corners of your cellphones tightly. It ensures the safety and stably charged of your smart phone attached to the motorcycle handlebar even on a bumpy road.
- Easy To Install Package including with handlebars base and rear-view mirror mounting base, you can be according you like to make phone mount on handlebar or rear-view. The motorcycle phone holder handlebar mounting base fit for handlebars 0.5''(12mm) / 0.87''(22mm) / 1.0''(25.4mm) / 1.26'' (32mm) in diameter.
- Wide Compatibility With an adjustable design, the body size of the motorcycle wireless phone holder can be adjusted according to the size of your phone. The adjustable motorcycle phone mount compatible with 4.7-6.9'' cellphones. Suitable for installation on bike, bicycle, motorcycle, stroller, mountain bike, dirt bike, trek bike, road bike, golf cart, electric scooter, etc.
- See more on Amazon...
Brand: Kewig | Manufacturer: Kewig
Warranty: 1 year warranty
See On Amazon #16
Suuwer 4.8A Motorcycle USB Charger, Quick Disconnect SAE to Dual USB Adapter Motorcycle Phone Charger, with LED Voltmeter & ON/Off Switch
Asin: B07WXKPTS3 | Model: SUW048 | PartNumber: SUW048 | Ean: 0722892481278 | UPC: 722892481278
3】Motorcycle Usb Charger. Configure On/Off Switch Prevent The Battery From Being Drained..
7】Compact Design: Simple Installation And Small Footprint, Dismantlement Availability, Easy Assembly, And Convenient Carrying, Is Ideal For Motorcycle Travel..
8】Friendly Service: Quality Issues 2/Year Warranty From The Purchase Date. Please Contact Seller Customer Service Team Directly For Any Product Issue..
5】There Is An Attached Cover To Keep Water, Dust And Dirt Out Of The Plug..
6】Multiple Safety Protection: Input Overvoltage, Undervoltage Protection; Output Overcurrent, Overvoltage, Undervoltage, Short Circuit Protection, Reverse Connection Protection..
4】Sae To Usb Adapter. Has A Built-In Voltmeter. Measure Motorcycle Battery Voltage, Display Mobile Phone Charging Voltage And Current..
2】Compatible With All Iphone, Gps, Camera, Digital Cameras, Or Any Smartphone Or Device That May Be Charged Via Usb..
Features
- 1 24 watt dual-port usb motorcycle phone charger. will automatically detect and provide the fastest possible charging speed up to 2.4A one port
- 2 Compatible with all iPhone, GPS, Camera, digital cameras, or any Smartphone or device that may be charged via USB.
- 3 Motorcycle usb charger. Configure ON/OFF switch prevent the battery from being drained.
- 4 Sae to usb adapter. Has a built-in voltmeter. Measure motorcycle battery voltage, Display mobile phone charging voltage and current.
- 5 There is an attached cover to keep water, dust and dirt out of the plug.
- 6 Multiple safety protection: Input overvoltage, undervoltage protection; output overcurrent, overvoltage, undervoltage, short circuit protection, reverse connection protection.
- 7 Compact Design: Simple installation and small footprint, dismantlement availability, easy assembly, and convenient carrying, is ideal for motorcycle travel.
- 8 Friendly Service: Quality issues 2/Year warranty from the purchase date. please contact seller customer service team directly for any product issue.
- See more on Amazon...
Brand: Suuwer | Manufacturer: Suuwer
Dimensions: 0.87 x 3.30 x 1.14 Inches | Weight: 0.07 pounds
Warranty: 2 years
See On Amazon #17
iMESTOU Anti-Theft Motorcycle Wireless Phone Mount Charger 15W & USB C 3A Handlebar 1" Ball Stem Phone Holder Works with 12V/24V Vehicle/USB Socket 720 Rotation Quick Charge for 4.0-7.0" Cellphones
Asin: B096W6G9K2 | Model: M14A-1 | PartNumber: M14A-1
➣One-Hand Operation & Anti-Theft Lock: One-Click To Lock Your Phone Tightly Instantly, This Motorcycle Qi Phone Mount Make Sure The Mobile Secure Even On Bumpy Roads; The Special Anti-Theft Lock Design Dispels Your Worries About Leaving The Item Outside. This New Developed Handlebar Phone Mount Charger Makes Operation Simple And Easy During Ride, Prevents Being Stolen When Not In Using..
➣Universal Fits & Wide Compatibility: Coming With Two Different Thickness Sleeves For Handlebar Mount, This Phone Mount Can Universally Fit To 0.86"-1.26" Diameter Handlebars; The Extendable Feet Allows To Be Suitable For 4.0-7.0" Large Phones.(The Max. Thickness Of (Phone & Case) Should Be ≤0.63"..
➣Aluminium Handlebar Base For Super Sturdy: Made From Aluminium Alloy Handlebar Mount Base, Stainless Steel Clamping Arms, The Motorcycle Wireless Phone Holder Makes Sure The Phone Stable And The Mount Sturdy On The Motorcycles. Never Break Or Shake!.
➣More Free Rotation On Handlebar: With Double Socket 1" Ball Joints, This Motorcycle Wireless/Usb Charger Can Be Adjusted To Any Angles Or Proper Position To Suit Horizontal/ Vertical Screen Requirement; It's More Freely For Adjustment Than Ordinary Types..
➣Double Socket Arms With 1" Balls: The Unique Double Socket Arms Of Handlebar Mount Design Is With Two 1 Inch Balls Which Is Compatible With Ram Mounts Without Charging Function. It Provides Customers Free Choices And Combine What They Like..
➣Wiring To 12V Motorcycles/ Plugging To Usb A Socket: Except The Normal Way To Get Power From 12V/24V Motorcycles, The Motorcycle Wireless/Usb Charging Holder Supports To Be Connected By Usb C To Usb A Sockets. The Wireless And Usb C Works At The Same Time When Wired To Motorccyles; The Wireless Power Smartphone Alone When Plugging To Usb A Sockets..
Features
- Wireless /USB C Charge Simultaneously: this motorcycle wireless phone mount charger allows to power mobiles by wireless, and charge cameras/MP3/MP4 through USB C at the same time. 15W wide wireless circuit built in, this item quickly charges smartphone supporting qi charging; 20W USB C output port provides much fast charging speed than conventional USB A socket.
- Wiring to 12V Motorcycles/ Plugging to USB A Socket: except the normal way to get power from 12V/24V motorcycles, the motorcycle wireless/USB charging holder supports to be connected by USB C to USB A sockets. The wireless and USB C works at the same time when wired to motorccyles; the wireless power smartphone alone when plugging to USB A sockets.
- One-Hand Operation & Anti-Theft Lock: one-click to lock your phone tightly instantly, this motorcycle qi phone mount make sure the mobile secure even on bumpy roads; the special anti-theft lock design dispels your worries about leaving the item outside. This new developed handlebar phone mount charger makes operation simple and easy during ride, prevents being stolen when not in using.
- Double Socket Arms with 1 Balls: the unique double socket arms of handlebar mount design is with two 1 inch balls which is compatible with RAM MOUNTS without charging function. It provides customers free choices and combine what they like.
- Aluminium Handlebar Base for Super Sturdy: made from aluminium alloy handlebar mount base, stainless steel clamping arms, the motorcycle wireless phone holder makes sure the phone stable and the mount sturdy on the motorcycles. NEVER BREAK OR SHAKE!
- More Free Rotation on Handlebar: with double socket 1 ball joints, this motorcycle wireless/USB charger can be adjusted to any angles or proper position to suit horizontal/ vertical screen requirement; it's more freely for adjustment than ordinary types.
- Universal Fits & Wide Compatibility: coming with two different thickness sleeves for handlebar mount, this phone mount can universally fit to 0.86-1.26 diameter handlebars; the extendable feet allows to be suitable for 4.0-7.0 large phones.(the max. thickness of (phone & case) should be 0.63.
- See more on Amazon...
Brand: iMESTOU | Manufacturer: iMESTOU
Dimensions: 1.97 x 5.71 x 3.54 inches | Weight: 1.05 pounds
See On Amazon #18
Motorcycle USB Phone Charger Qidoe Dual USB PD & Quick Charge 3.0 Motorcycle USB Charger Waterproof Motorcycle Accessories for Phone, iPad, GPS, etc
Asin: B0CYC8LSF2
【Waterproof & Dust Proof Cap】There Is A Full-Coverage Dust Cover To Prevent Water And Dust From Messing Up The Usb Port. -Safety Design For Overcurrent, Overvoltage, Overtemperature And Reverse Connection. Waterproof - Fully Bonded Pcba, No Need To Worry About Damage [Ip68].
【Universal Capability】The Input Voltage Of The Motorcycle Usb Charger Is (12V-24V). It Can Automatically Adjust The Voltage Output According To Your Device (Usb-A: 5V/3.4A, 9V/2.5A, 12V/1.5A Type-C: 5V/3A 9V/3A 12V/2.5A), Fully Compatible With Ipad, Iphone , Ipod, Htc, Galaxy, Blackberry, Digital Cameras, Pdas, Mp3 Players, Cell Phones And Gps..
【0 Power Consumption】Non-Working Zero Loss Mode, If No Device Is Charging, It Will Not Consume Any Power From The Battery Even If The Charging Cable Is Connected. It Can Be Connected To The Power Supply For A Long Time Without Consuming The Battery..
【Easy To Install】Two Installation Methods, Handlebar Installation And Screw Installation, Can Meet The Installation And Use Of Most Models On The Market..
Features
- Motorcycle Dual USB Port Fast Charger This motorcycle USB charger features dual charging ports, including Type-C and Quick Charge 3.0, to easily charge two smartphone or tablet devices at the same time. Compatible including but not limited to iPhone, Samsung, Note, LG and Google etc
- Easy to install Two installation methods, handlebar installation and screw installation, can meet the installation and use of most models on the market.
- Waterproof & Dust Proof Cap There is a full-coverage dust cover to prevent water and dust from messing up the USB port. -Safety design for overcurrent, overvoltage, overtemperature and reverse connection. Waterproof - Fully bonded PCBA, no need to worry about damage [IP68]
- 0 power consumption Non-working zero loss mode, if no device is charging, it will not consume any power from the battery even if the charging cable is connected. It can be connected to the power supply for a long time without consuming the battery.
- Universal Capability The input voltage of the motorcycle USB charger is (12V-24V). It can automatically adjust the voltage output according to your device (USB-A: 5V/3.4A, 9V/2.5A, 12V/1.5A TYPE-C: 5V/3A 9V/3A 12V/2.5A), fully compatible with iPad, iPhone , iPod, HTC, Galaxy, Blackberry, digital cameras, PDAs, MP3 players, cell phones and GPS.
- See more on Amazon...
Brand: Qidoe | Manufacturer: Shenzhen GSG Technology Co.Ltd
Dimensions: 1.18 x 3.94 x 1.57 inches | Weight: 0.17 pounds
Warranty: six months
See On Amazon #19
OXWIND 6.8A Motorcycle USB Phone Charger, Dual Port QC+PD 3.0 Motorcycle Phone Charger with Voltmeter ON/Off Switch & Fuse, Waterproof Motorcycle Accessories SAE USB Adapter for Phone,Tablet, GPS
Asin: B0C5CC5J5C
[Led Voltmeter & On/Off Switch]: The Motorcycle Usb Charger Adopts An Independent Switch Button And A On/Off Switch, So You Will Know The Health Of The Battery While Driving. It Automatically Monitors The Battery And Electrical System And Displays The Voltage On The Screen To Avoid Power Consumption And Facilitate Use. (Tips: If The Voltage Is Below 12V, Please Replace The Battery As Soon As Possible.).
[Easy To Install & Perfect Length]：Two Types Of Installation, Handlebar Mounting And Screw Mounting. It Can Meet Most Of The Models On The Market Installation Use.(Handlebar Installation For Handlebar Diameter Of (0.74-0.86Inch). We Have Extended The Perfect Length (50.3Inch) And Sae To 2Pin Extension Cable (7.48Inch) . It’S Long Enough To Connect To The Battery..
[Waterproof & Dustproof Design]：Water And Dust Resistance Usb Cap Can Protect Internal Circuits And Effectively Enhance Its Lifespan. For Continuous Heavy Rain, Please Turn The Switch Off. After The Rain, Make Sure The Usb Port Is Dry Before Turning It On Again..
[Sae To Usb Adapter]: Sae To Usb Adapter Motorcycle Usb Phone Charger, Input: 12 Volt, Output: Usb:5V-3.4A 9V-2A 12V-1.5A；Type-C:5V-3A 9V-3A 12V-2.5A. Built-In Smart Chip Adjust The Output Electricity For Your Device Auto. (Nope:With Smart Ic Assistant, Your Device Does Not Support Fast Charging. It Will Not Hurt Your Battery & Charging Safely.).
Features
- [Dual USB Port Fast Charging Adapter]: Quick Charge 3.0 & Type C PD allow you to charge Two devices at the same time. If your device supports quick charge 3.0/Adaptive fast charging or SCP/FCP Charging Technology. Then this device would be a better choice rather than Traditional 2.4A/3.1A Motorcycle Phone Charger. This SAE to USB Phone Charge Can fast charging for Cell Phone.
- [SAE to USB Adapter]: SAE to USB Adapter Motorcycle USB phone charger, Input: 12 volt, Output: USB:5V-3.4A 9V-2A 12V-1.5A TYPE-C:5V-3A 9V-3A 12V-2.5A. Built-in smart chip adjust the output electricity for your device auto. (Nope:With Smart IC Assistant, your device does not support fast charging. It will not hurt your battery & charging safely.)
- [LED Voltmeter & ON/OFF Switch]: The motorcycle USB charger adopts an independent switch button and a on/off switch, so you will know the health of the battery while driving. It automatically monitors the battery and electrical system and displays the voltage on the screen to avoid power consumption and facilitate use. (TIPS: If the voltage is below 12V, please replace the battery as soon as possible.)
- [Waterproof & Dustproof Design] Water and dust resistance USB cap can protect internal circuits and effectively enhance its lifespan. For Continuous heavy rain, please turn the switch off. After the rain, make sure the USB port is dry before turning it on again.
- [Easy to Install & Perfect Length] Two types of installation, handlebar mounting and screw mounting. It can meet most of the models on the market installation use.(Handlebar installation for handlebar diameter of (0.74-0.86inch). We have extended the Perfect Length (50.3inch) and SAE to 2Pin Extension Cable (7.48inch) . It s Long Enough to Connect to the Battery.
- See more on Amazon...
Brand: OXWIND | Manufacturer: OXWIND
Weight: 0.32 pounds
Warranty: 1 year
See On Amazon
Looking For Something Else?
Search