Edulnke Lifting Jack Pads Compatible with Tesla Model 3/S/X/Y, Upgrade Sturdy Rubber Lift Jack Pucks, 2016-2023 Jack Pad with Protective Ring, Floor Jack Adapters Protects Battery & Chassis
Asin: B0BYZ7V9MP | Model: tesla model y lift pucks | PartNumber: tesla model y lift pucks
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Upgrade Hard Vulcanized Rubber: One-Piece Molded Rubber Is Sturdy And Durable. The Hard Rubber Are Strong Enough To Provide Sufficient Support Force. So You Can Use Your Lifting Jack With Ease. A Good Assistant For Tesla Owners Or The Auto Repair Shop..
Must Accessories For Tesla Owners: Storage Bag Keeps Jack Lift Pads Organized. With These Pads You Can Take Your Car To Any Garage, In Case Of Emergency..
Easy To Use: Insert 4 Pack Floor Jack Pucks Into The Center Of The Jack Hole On The Vehicle And Position The Jack Directly Beneath It. The O-Ring Keeps Them From Falling Out While You Line Up The Jack. Fit Perfectly Without Gap, Easily Pop In And Out..
Battery&Chassis &Paint Protection: When Using A Jack, Too Much Gravity Or Too Small A Fulcrum Will Cause Certain Damage To The Car. Edulnke Lift Rubber Jack Pads For Floor Jack Has A 1 Inch Diameter Post That Can Fixed Position And Then Allows You To Avoid Accidental Jacking To Other Location Of Original Car, Protect Battery, Chassis And Paint From Damage..
Features
- A MUST HAVE FOR TESLA: Specifically designed for 2016 2017 2018 2019 2020 2021 2022 2023 Tesla model 3/Y/S/X. Due to the battery, the car should not be lifted without these pucks. One slip off the jack and there could be some costly damages. These will help you avoid that.
- BATTERY&CHASSIS &PAINT PROTECTION: When using a jack, too much gravity or too small a fulcrum will cause certain damage to the car. Edulnke lift rubber jack pads for floor jack has a 1 inch diameter post that can fixed position and then allows you to avoid accidental jacking to other location of original car, protect battery, chassis and paint from damage.
- UPGRADE HARD VULCANIZED RUBBER: One-piece molded rubber is sturdy and durable. The hard rubber are strong enough to provide sufficient support force. So you can use your lifting jack with ease. A good assistant for tesla owners or the auto repair shop.
- EASY TO USE: Insert 4 pack floor jack pucks into the center of the jack hole on the vehicle and position the jack directly beneath it. The o-ring keeps them from falling out while you line up the jack. Fit perfectly without gap, easily pop in and out.
- MUST ACCESSORIES FOR TESLA OWNERS: Storage bag keeps jack lift pads organized. With these pads you can take your car to any garage, in case of emergency.
- See more on Amazon...
Brand: Edulnke | Manufacturer: Edulnke
Dimensions: 1.90 x 3.10 x 3.10 Inches | Weight: 0.36 pounds
Warranty: 1 year
See On Amazon Similar To Edulnke Lifting Jack Pads Compatible
#1
TONDA Floor Jack Rubber Pad, Universal Jack Pad Adapter, Pinch Weld Side Frame Rail Protector, 1 Pack
Asin: B0BWDPGH1J | Model: floorjack1 | PartNumber: floorjack1
[Universal]: The Jack Pad Adapter Is Suitable For Cars Up To 3 Ton. It Can Work Perfectly With A Wide Range Of Vehicles And Floor Jacks.
[Product Parameters]: Diameter: 4.92Inch/125Mm. Thickness: 26Mm/1.02Inch; Net Weight: 0.11Lbs/245G ; Capacity: 2-3 Ton ; Set Includes 1 Pack.
[Durable Rubber]: Pads Are Made From Highly Durable Rubber That Is Specifically Designed For Durability And Longevity To Hold Up To The Rigorous Needs Of Mechanics And Diy Enthusiasts.
[Anti-Slip Design]: The Waffle Surface Grip At The Top Of The Jack Pads Can Effectively Enhance The Friction, Play A Good Anti-Slip Effect, Providing You With Better Protection.
Features
- [SLOTTED DESIGN]: The cross grooove design of floor jack pads is a great protector to align with the side welding seam, prevent your frame rail, specifically pinch welds from bending or scratching. And it also provides more cushioning and crush resistance to protect painted or coated chassis components
- [ANTI-SLIP DESIGN]: The waffle surface grip at the top of the jack pads can effectively enhance the friction, play a good anti-slip effect, providing you with better protection
- [UNIVERSAL]: The jack pad adapter is suitable for cars up to 3 ton. It can work perfectly with a wide range of vehicles and floor jacks
- [DURABLE RUBBER]: Pads are made from highly durable rubber that is specifically designed for durability and longevity to hold up to the rigorous needs of mechanics and DIY enthusiasts
- [PRODUCT PARAMETERS]: Diameter: 4.92inch/125mm. Thickness: 26mm/1.02inch; Net weight: 0.11lbs/245g ; Capacity: 2-3 ton ; Set includes 1 pack
- See more on Amazon...
Brand: TONDA | Manufacturer: TONDA
Dimensions: 0.98 x 4.92 x 4.92 inches | Weight: 0.62 pounds
Warranty: No
See On Amazon #2
Universal Floor Jack Rubber Pad Jack Pad Adapter Pinch Weld Side Frame Rail Protector Puck/Pad (1 Pack)
Asin: B07V32536W | Model: JACKPAD-1 | PartNumber: JACKPAD-1 | Ean: 0768894212588 | UPC: 768894212588
【Size】Diameter: 125Mm/4.92Inch. Thickness: 26Mm/1.02Inch. This Product Is Used To Protect The Car Undercarriage Metal Jack Point Railing That Is On Most Vehicles..
【Package Includes】1 X Jack Pad; By The Way,Satisfaction Warranty: Any Dissatisfaction Please Contact Us For Help/Support. Small Tips: Because It Is Newly Factory Production And Heavy Duty Rubber Material, So It Will Have A Little Bit Rubber Smell, Please Put It In The Ventilation Room For Some While !.
【Jack Support Cushioning Pressure Pad】Prevent Your Frame Rails From Bending When Using A Jack To Lift Your Car. Soft Rubber Surface, Do Not Scratch Painted Or Coated Chassis Parts..
【Fits Most Floor Jacks And Vehicles】Fits Most Jacks And Vehicles, Please Verify Dimensions And Ensure Fitment To Your Vehicle..
Features
- High Quality Heavy duty construction rubber material MAXIMUM Load Bearing: 2 Ton; Made of Durable rubber construction and cross slotted design, provides more cushion and crush resistance.
- Fits most Floor Jacks and vehicles Fits most Jacks and vehicles, please verify dimensions and ensure fitment to your vehicle.
- Size Diameter: 125mm/4.92inch. Thickness: 26mm/1.02inch. This product is used to protect the car undercarriage metal jack point railing that is on most vehicles.
- Jack Support Cushioning Pressure Pad Prevent your frame rails from bending when using a Jack to lift your car. Soft rubber surface, do not scratch painted or coated chassis parts.
- Package includes 1 x jack pad; By the way,Satisfaction Warranty: any dissatisfaction please contact us for help/support. Small tips: because it is newly factory production and heavy duty rubber material, so it will have a little bit rubber smell, please put it in the ventilation room for some while !
- See more on Amazon...
Brand: GeeWatom | Manufacturer: GeeWatom
Warranty: 90 days
See On Amazon #3
JACK BOSS Jack Pad Universal Large Floor Jack Rubber Pads Adapter Pinch,Weld Side Frame Rail Protector Puck/Pad (1 Pack)
Asin: B095S3MCJ7 | Model: 3A PAD | PartNumber: 3A PAD
Size&Note: Jack Pads Diameter：4.17 Inch.Thickness:1 Inch.Groove Width:0.7Inch.Groove Depth:0.23 Inch.Each Maximum Load Bearing:3 Ton. Please Measure Floor Jack's Saddle Size Before Purchase.
Notes: If You Have Any Question You Can Contact Us，We Will Be The First Time To Solve For You.Our Floor Jack Pads Are Tested For Strict Quality.
Universal Floor Jack Rubber Pad: Protector Puck/Pad Fit Most Standard Hydraulic Floor Jacks And Vehicles.Easy To Install And Change.
Unique Groove Design: Center Down Groove Design Of Floor Jack Adapter Provide More Cushion And Crush Resistance.The Wider And Deeper Groove Contact Area Than Other Rubber Pads ，Making Groove Aligns Nicely Insert Weld.Fits Snug At The Base And Sits Very Sturdy On The Jack.Have Greater Security.
Features
- Material&Function: Sturdy rubber jack pad is durable and non-deformable with long service life.Soft enough pad surface is to prevent frame rails and pinch welds from bending,and protect painted or coated chassis parts when using floor jack to lift the car
- Unique Groove Design: Center down groove design of floor jack adapter provide more cushion and crush resistance.The wider and deeper groove contact area than other rubber pads making groove aligns nicely insert weld.Fits snug at the base and sits very sturdy on the jack.Have greater security
- Size&Note: Jack pads diameter 4.17 inch.Thickness:1 inch.Groove width:0.7inch.Groove depth:0.23 inch.Each maximum load bearing:3 Ton. Please measure floor jack's saddle size before purchase
- Universal Floor Jack Rubber Pad: Protector Puck/Pad fit most standard hydraulic floor jacks and vehicles.Easy to install and change
- Notes: If you have any question you can contact us we will be the first time to solve for you.Our floor jack pads are tested for strict quality
- See more on Amazon...
Brand: Nextuyere | Manufacturer: Torin
Weight: 0.60 Pounds
Warranty: 1 Year
See On Amazon #4
TONDA Jack Stand Pads, Universal Rubber Jack Pad Adapter, Rail Pinch welds Protector, 4 Pack
Asin: B0BG1WL3S2 | Model: PAD-4 | PartNumber: PAD-4
[Universal]: The Jack Pad Adapter Is Suitable For Cars Up To 3 Ton. It Can Work Perfectly With A Wide Range Of Vehicles And Jack Stands.
[Product Parameters]: Size: 2.45“ X 1.96" X 1.73"; Net Weight: 0.26Lbs ; Capacity: 2-3 Ton ; Set Includes 4 Packs.
[Durable Rubber]: Pads Are Made From Highly Durable Rubber That Is Specifically Designed For Durability And Longevity To Hold Up To The Rigorous Needs Of Mechanics And Diy Enthusiasts.
[Anti-Slip Design]: The Waffle Surface Grip At The Top Of The Jack Pads Can Effectively Enhance The Friction, Play A Good Anti-Slip Effect, Providing You With Better Protection.
Features
- [SLOTTED DESIGN]: The middle grooove design of jack stand pads is a great protector to prevent your frame rail, specifically pinch welds from bending or scratching while using with a car jack stand. And it also provides more cushioning and crush resistance to protect painted or coated chassis components
- [ANTI-SLIP DESIGN]: The waffle surface grip at the top of the jack pads can effectively enhance the friction, play a good anti-slip effect, providing you with better protection
- [UNIVERSAL]: The jack pad adapter is suitable for cars up to 3 ton. It can work perfectly with a wide range of vehicles and jack stands
- [DURABLE RUBBER]: Pads are made from highly durable rubber that is specifically designed for durability and longevity to hold up to the rigorous needs of mechanics and DIY enthusiasts
- [PRODUCT PARAMETERS]: Size: 2.45 x 1.96 x 1.73; Net weight: 0.26lbs ; Capacity: 2-3 ton ; Set includes 4 packs
- See more on Amazon...
Brand: TONDA | Manufacturer: TONDA
Dimensions: 1.96 x 2.45 x 1.73 Inches | Weight: 1.10 Pounds
Warranty: 1 Year Warranty
See On Amazon #5
PLANGER - Power PAD Flat - Premium Rubber Jack Pad for Trolley Jack, Vehicle Lift and Axle Stand - Universal Usage - Protects Your Car, SUV and Vehicles with Pinch Weld Sill - Perfect for car Tuning
Asin: B06XG2Q91R | Model: P-SP1 | PartNumber: P-SP1 | Ean: 4260542210244
Product Properties - Material: Very Robust Nr/Sbr Rubber (80 Shore A) // Dimensions: Diameter Top = 65Mm , Diameter Bottom (Attachment For Jack) = 38Mm, // Suitable For Cars Up To 3.5T. // Important: Before Buying, Check The Dimensions Of Your Car And Jack And Compare Them With The Dimensions In Picture 4..
10 Years Warranty - We Are 100% Convinced Of Our Product! That Is Why We Offer You A Ten-Year Guarantee. Our Customer Service Will Also Be Happy To Advise You. Convince Yourself!.
Protection & Safety - No Compromise In The Protection Of Your Car! Your Car Is Protected Against Slipping. The Indentation On The Underside Of The Rubber Buffer Ensures A Stable Hold On The Jack Plate..
Real Quality - Due To Our Special Rubber Compound, You Will Enjoy Our Product For Years. Choose Premium Protection..
Features
- EASY TO USE - The Power Pad flat is perfectly suitable for various car bodies and jacks (e.g. Unitec, Michelin etc.) The application is quick, uncomplicated, slip-proof and accurate!
- REAL QUALITY - Due to our special rubber compound, you will enjoy our product for years. Choose premium protection.
- PRODUCT PROPERTIES - Material: Very robust NR/SBR rubber (80 Shore A) // Dimensions: Diameter top = 65mm , Diameter bottom (attachment for jack) = 38mm, // Suitable for cars up to 3.5T. // IMPORTANT: Before buying, check the dimensions of your car and jack and compare them with the dimensions in picture 4.
- PROTECTION & SAFETY - No compromise in the protection of your car! Your car is protected against slipping. The indentation on the underside of the rubber buffer ensures a stable hold on the jack plate.
- 10 YEARS WARRANTY - We are 100% convinced of our product! That is why we offer you a ten-year guarantee. Our customer service will also be happy to advise you. Convince yourself!
- See more on Amazon...
Brand: PLANGER | Manufacturer: PLANGER-Autoteile
Dimensions: 1.06 x 2.56 x 2.56 Inches | Weight: 0.24 Pounds
See On Amazon #6
Seven Sparta Off-Road Base Compatible with Hi Lift Jack PP Pad to Alleviate Jack Hoisting Sinkage (Red)
Asin: B07HCF5H38 | Model: Seven Sparta-091401 | PartNumber: Seven Sparta-091401 | Ean: 0602822981521 | UPC: 602822981521
Heavy Duty And Easy To Carry: Made Of A Tough Pp Synthetic Material, Better More Than A Chunk Of Wood Will Not Rot Or Break. A Drilled Hole In Center Of Base Attached To Your Jack Bar, Store It Easy.
No-Risk Purchase! Unconditional 30-Day Money-Back Guarantee. If You’Re Unsatisfied With This Item For Any Reason, We’Ll Immediately Refund Your Purchase Price.
One Side With Serrated Teeth: Helps To Scrape At Hard Dirt Or Gravel, To Create A Clean, Flat Surface For The Base To Sit On While In Use.
Alleviate Jack Sinkage On Soft Ground: Used On Soft Ground Like Sand, Mud, Grass. Give The Off-Road Base Better Footing And Greater Stability During The Lifting Process.
Features
- COMPATIBLE WITH MOST HI-LIFT JACKS:Designed and Used for most of Hi-Lift jacks, Includes model All-Cast Jack, Cast/Steel Jack, X-TREME Jack, UTV Jack, Patriot Edition Jack, Equipment/Agriculture Jack(EJ-550). Do not fit for POST POPPER Jack
- ALLEVIATE JACK SINKAGE ON SOFT GROUND: Used on soft ground like sand, mud, grass. Give the Off-Road Base better footing and greater stability during the lifting process
- HEAVY DUTY AND EASY TO CARRY: Made of a tough PP synthetic material, better more than a chunk of wood will not rot or break. A drilled hole in center of base attached to your jack bar, store it easy
- ONE SIDE WITH SERRATED TEETH: Helps to scrape at hard dirt or gravel, to create a clean, flat surface for the base to sit on while in use
- NO-RISK PURCHASE! UNCONDITIONAL 30-DAY MONEY-BACK GUARANTEE. If you re unsatisfied with this item for any reason, we ll immediately refund your purchase price
- See more on Amazon...
Brand: SEVEN SPARTA | Manufacturer: Seven Sparta
Dimensions: 3.00 x 12.00 x 12.00 Inches
See On Amazon #7
Amylove 8 Pcs 2 Types Jack Stand Pads Adapter Universal Slotted Frame Rail Pinch Welds Protector Rubber Jack Pad for Jack Stand Accessories
Asin: B0BMPWWL4B
Strong And Stable: Floor Jack Pad Increases Extra Grip And Reduces Skidding When Lifting The Car, Made Of Quality Rubber, Adopting Slotted Design, To Provide More Cushioning And Pressure Resistance.
Reliable And Serviceable: Our Pinch Weld Jack Pad Is Soft Enough To Resist The Pressure Of Floor Jack And Avoid Hurting Your Car Parts, While Strong Enough To Support Your Jack, Reliable Enough For Long Term Service.
Adequate To Meet Your Needs: You Will Receive 8 Pieces Of Jack Stand Rubber Pads In 2 Different Types, 4 Pieces For Each Type, Sufficient In Quantity To Meet Your Various Using And Replacing Needs, And You Can Share Them With People Around You.
Available In 2 Types: The Package Contains 2 Types Of Jack Pads For Floor Jack, Including Round And V Groove Shape, The Round Measures About 2.95 Inches/ 75 Mm In Diameter And 1.38 Inches/ 35 Mm In Height, The V Groove Shaped Measures About 2.48 X 1.97 X 1.73 Inches/ 63 X 50 X 44 Mm, Universal For Different Types Of Car Body And Jack.
Features
- Provide Protection for the Car: when the car is lifted by a jack, jack stand pads can avoid the frame longitudinal beam and the clamp weld bending, and can also protect the painted or coated suspension components to avoid the chassis guide rail from being scratched, bent or broken
- Available in 2 Types: the package contains 2 types of jack pads for floor jack, including round and V groove shape, the round measures about 2.95 inches/ 75 mm in diameter and 1.38 inches/ 35 mm in height, the V groove shaped measures about 2.48 x 1.97 x 1.73 inches/ 63 x 50 x 44 mm, universal for different types of car body and jack
- Strong and Stable: floor jack pad increases extra grip and reduces skidding when lifting the car, made of quality rubber, adopting slotted design, to provide more cushioning and pressure resistance
- Adequate to Meet Your Needs: you will receive 8 pieces of jack stand rubber pads in 2 different types, 4 pieces for each type, sufficient in quantity to meet your various using and replacing needs, and you can share them with people around you
- Reliable and Serviceable: our pinch weld jack pad is soft enough to resist the pressure of floor jack and avoid hurting your car parts, while strong enough to support your jack, reliable enough for long term service
- See more on Amazon...
Brand: Amylove | Manufacturer: Amylove
See On Amazon #8
TONDA Floor Jack Rubber Pad, Universal Jack Pad Adapter, Pinch Weld Side Frame Rail Protector (2 Pack)
Asin: B0CDB1R7SS | Model: FLOOR JACK PAD | PartNumber: FLOOR JACK PAD
[Durable Rubber]: Made From High-Quality, Durable Rubber, Our Pads Are Designed To Withstand The Rigorous Needs Of Diy Mechanics And Professional Repair Technicians. They Offer Long-Lasting Protection For Your Vehicle..
[Note]: Before Making A Purchase, Please Verify The Dimensions Of Your Vehicle And Jacks To Ensure Proper Fitment. If You Have Any Issues, Please Reach Out To Our Customer Support Team For Assistance.
[Product Parameters]: With A Diameter Of 2.83 Inches And Thickness Of 1.29 Inches, Our Pads Have A Net Weight Of 0.36Lbs And A Capacity Of 2-3 Ton. Each Set Includes 2 Packs Of Pads..
[Universal]: The Jack Pad Adapter Is Suitable For Cars Up To 3 Ton. Fits Most Types Of Floor Jacks And Can Be Easily Installed Within Seconds.
Features
- [SLOTTED DESIGN]: The slotted design of floor jack pads is a great protector to align with the side welding seam, prevent your frame rail, specifically pinch welds from bending or scratching. And it also provides more cushioning and crush resistance to protect painted or coated chassis components
- [UNIVERSAL]: The jack pad adapter is suitable for cars up to 3 ton. Fits most types of floor jacks and can be easily installed within seconds
- [DURABLE RUBBER]: Made from high-quality, durable rubber, our pads are designed to withstand the rigorous needs of DIY mechanics and professional repair technicians. They offer long-lasting protection for your vehicle.
- [PRODUCT PARAMETERS]: With a diameter of 2.83 inches and thickness of 1.29 inches, our pads have a net weight of 0.36lbs and a capacity of 2-3 ton. Each set includes 2 packs of pads.
- [NOTE]: Before making a purchase, please verify the dimensions of your vehicle and jacks to ensure proper fitment. If you have any issues, please reach out to our customer support team for assistance
- See more on Amazon...
Brand: TONDA | Manufacturer: TONDA
Dimensions: 1.29 x 2.83 x 2.83 Inches | Weight: 0.72 Pounds
See On Amazon #9
A ABIGAIL Universal Floor Jack Rubber Pad Jack Adapter Pinch Weld Side Frame Rail Protector Puck/Pad
Asin: B083TP6WCL | Model: SUVELAM | PartNumber: SUVELAM
Pad Dimensions: Diameter: 125Mm. Thickness: 26Mm. Jack Pading/Puck/Caps: This Product Is Used To Protect The Car Undercarriage Metal Jack Point Railing That Is On Most Vehicles..
Service: 100% Satisfaction Guarantee, If You Have Any Issues With The Jack Pad, Simply Contact Customer Service For Troubleshooting Help, Parts, Replacement, Or Refund. Our Aim Is To Make You Satisfy The Parts And The Service We Provide For You..
Maximum Load Bearing: 3 Ton, Fits Most Jacks And Vehicles, Please Verify Dimensions And Ensure Fitment To Your Vehicle, Please Verify Dimensions And Ensure Fitment To Your Vehicle..
Function: A Abigail Jack Pad Is Designed To Be Sturdy Enough To Support Your Lift Point While Soft Enough To Preventing Pinch Weld Seams And Frame Rails From Bending Or Breaking When Jacking Up Your Car..
Features
- High Quality: Made from highly durable rubber and cross slotted design which will provide more cushion and crush resistance. This rubber jack pad may smell a little bit stinks when it's new. Please do not mind it.
- Function: A ABIGAIL Jack Pad is designed to be sturdy enough to support your lift point while soft enough to preventing pinch Weld Seams and Frame Rails from bending or breaking when jacking up your car.
- Pad Dimensions: Diameter: 125mm. Thickness: 26mm. Jack pading/puck/caps: This product is used to protect the car undercarriage metal jack point railing that is on most vehicles.
- Maximum Load Bearing: 3 Ton, Fits most Jacks and vehicles, please verify dimensions and ensure fitment to your vehicle, please verify dimensions and ensure fitment to your vehicle.
- Service: 100% satisfaction guarantee, If you have any issues with the Jack Pad, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.
- See more on Amazon...
Brand: A ABIGAIL | Manufacturer: A ABIGAIL
Dimensions: 1.00 x 5.00 x 7.00 Inches
See On Amazon #10
HOXWELL Rubber Jack Pad Pinch Weld Adapter, Universal Slotted Frame Rail Protector for Floor Jack Stands, Jack Pads Extension and Protection, 4 Packs
Asin: B0BC16RZFW | Model: NBRJP7563 | PartNumber: NBRJP7563
[Anti-Slip Design]:Rubber-Textured Surfaces And Slotted Design Can Increase Friction, Better Secure The Jack And Car..
[Sincerely Service]：If Any Questions, Please Feel Free To Contact Us, We Will Glad To Help You..
[Widely Used]：The Jack Pad Fits Most Jacks And Cars, And The Included 2 Types Give You More Wider Use. The Round Type Jack Pad's Slot Dimensions: Groove Width-10Mm, Groove Depth-15Mm.V-Type Jack Pad's Slot Dimensions: Groove Width-8 Mm, Groove Depth-17Mm.Tips: According To The Groove Size Confirm Whether It Is Suitable For Your Jack And Car..
[Durable Material]:Made Of Highly Durable Rubber，Has Stronger Cushioning And Bearing, Maximum Load Bearing: 2-4 Tons. Soft Rubber Surface Better Protects Car And Jack From Scratches.Tips: The Rubber Material Has A Little Rubber Smell, Can Be Left In The Air For A While..
Features
- [PROTECT CAR AND JACK]:The jad pad prevents slippage when the jack lifts the car, Protect car's primer and jack clip welds.
- [DURABLE MATERIAL]:Made of highly durable rubber has stronger cushioning and bearing, maximum load bearing: 2-4 tons. Soft rubber surface better protects car and jack from scratches.Tips: The rubber material has a little rubber smell, can be left in the air for a while.
- [ANTI-SLIP DESIGN]:Rubber-textured surfaces and slotted design can increase friction, better secure the jack and car.
- [WIDELY USED] The jack pad fits most jacks and cars, and the included 2 types give you more wider use. The round type jack pad's slot dimensions: groove width-10mm, groove depth-15mm.V-Type jack pad's slot dimensions: groove width-8 mm, groove depth-17mm.Tips: According to the groove size confirm whether it is suitable for your jack and car.
- [SINCERELY SERVICE] If any questions, please feel free to contact us, we will glad to help you.
- See more on Amazon...
Brand: HOXWELL | Manufacturer: HOXWELL
Warranty: 2 months
See On Amazon #11
HXXF Floor Jack Pad Adapter 4 Ton Universal Rubber Slotted Frame Rail Pinch welds Protector for Floor Jack (4 Pack)
Asin: B07X7MYGYF | Ean: 0653445948316 | UPC: 653445948316
【Heavy Duty】 Made Of Durable Rubber Material, Maximum Load Bearing Is 4 Tons.Jack Stand Rubber Pad Adapter Is Designed To Be Sturdy Enough To Support Your Car While Soft Enough To Resist Pressure For Your Jack Stand..
【Promise】We Stand By And Believe In Our Products, Hxxf Provide You Friendly Customer Service.If You Are Not 100% Satisfied,Please Feel Free To Contact With Us,We Will Find A Solution Together And Make It A Great Shopping Experience..
【Niversal】We Have Specified Jack Pads' Dimension On The Picture, Please Check Your Jack's Size/Dimension Before Your Purchase. The Jack Pad Adapter Fits Most Floor Jacks And Vehicles And Hold Up To The Rigorous Needs Of Mechanics And Diy Enthusiasts, Alike..
【Best Protection】This Floor Jack Pad Adapter Is A Great Protector To Prevent Your Frame Rail, Specifically Pinch Welds From Bending Or Scratching While Using With A Car Jack Stand..
Features
- PAD DIMENSIONS Diameter-3inch, Hight-1.3inch, Groove depth-0.6inch,Groove Width-0.4inch
- BEST PROTECTION This floor jack pad adapter is a great protector to prevent your frame rail, specifically pinch welds from bending or scratching while using with a car jack stand.
- HEAVY DUTY Made of durable rubber material, Maximum Load Bearing is 4 Tons.Jack stand rubber pad adapter is designed to be sturdy enough to support your car while soft enough to resist pressure for your jack stand.
- NIVERSAL We have specified jack pads' dimension on the picture, Please check your jack's size/dimension before your purchase. The jack pad adapter fits most floor jacks and vehicles and hold up to the rigorous needs of mechanics and DIY enthusiasts, alike.
- PROMISE We stand by and believe in our products, HXXF provide you friendly customer service.If you are not 100% satisfied,please feel free to contact with us,we will find a solution together and make it a great shopping experience.
- See more on Amazon...
Brand: HXXF | Manufacturer: LOVIT
Dimensions: 0.75 x 5.00 x 3.00 inches | Weight: 0.75 pounds
See On Amazon #12
DIY Car Universal X-Slot Jack Pad Rubber Frame Rail Adapter Protector Pinch Weld Side Car Lifting Anti Slip Design Floor Support 10x4.7cm Trolley
Asin: B09245RGQQ | Model: 108P2416EBUS | PartNumber: 108P2416EBUS | Ean: 0786468585685 | UPC: 786468585685
Fits Most Jacks And Vehicles, Please Verify Dimensions And Ensure Fitment To Your Vehicle..
Maximum Load: 3 Tons, Diameter:10Cm/3.93In.Thickness:4.7Cm/1.85In..
There Is A Slotted Crossline On The Top Of The Car Jack Pad, Which Can Align With The Side Clip Weld And Protect The Side, So As To Prevent The Frame Longitudinal Beam From Bending When Lifting The Vehicle With The Jack..
Jack Pad Is Strong Enough To Support Your Lifting Point And Soft Enough To Prevent Bending Or Fracture Of Clamping Weld And Frame Longitudinal Beam When Jacking Up Your Car..
Features
- Made of Durable rubber construction and cross slotted design, provides more cushion and crush resistance.
- Jack pad is strong enough to support your lifting point and soft enough to prevent bending or fracture of clamping weld and frame longitudinal beam when jacking up your car.
- Fits most Jacks and vehicles, please verify dimensions and ensure fitment to your vehicle.
- There is a slotted crossline on the top of the car jack pad, which can align with the side clip weld and protect the side, so as to prevent the frame longitudinal beam from bending when lifting the vehicle with the jack.
- Maximum load: 3 tons, Diameter:10cm/3.93in.Thickness:4.7cm/1.85in.
- See more on Amazon...
Brand: AUTOXBERT | Manufacturer: AUTOXBERT
Dimensions: 2.36 x 6.30 x 5.91 Inches | Weight: 0.79 Pounds
See On Amazon #13
Yesland 6 Pack Universal Floor Jack Rubber Pad - Square Slotted Frame Jack Pad Adapter Black Anti-Slip Rail Pinch Weld Adapter for Car Lift, 3 Inch
Asin: B09YD6KCYZ | Model: Y-JackRubberPad-3In-6p | PartNumber: Y-JackRubberPad-3In-6p
Fits Most Floor Jacks And Vehicles. Yesland's Jack Pad Adapter Fits Most Jacks And Vehicles And Can Work Great With A Jack Stand. The Jack Puck Is Soft Enough To Absorb The Car Weight While Strong Enough To Support The Car..
Anti-Slip. The Rubber Pad Adds Extra Grip When Raising The Car And Reduce Slipping, It Is Stable..
Groove Design. The Grooves Of Car Lift Jack Pad Work Nice To Protect Your Car And The Body Seam Goes In And Sits Nice On The Jack. The Pinch Weld Slots On The Pad Are Really Nice As They Are Deep And Hug The Pinch Welds..
Universal Size. Dimension Of Each Pinch Weld Jack Adapter: 3"(L) X 3"(W) X1"(H). Groove Depth: 3/8" X 3/8". Weight Of Each Floor Jack Pad: 150G. Set Of 6..
Features
- Well made rubber jack pad. These jack stand pads are made of hard rubber. Solid construction of rubber. Very heavy duty would say tougher than a hockey puck.
- Universal Size. Dimension of each pinch weld jack adapter: 3(L) x 3(W) x1(H). Groove depth: 3/8 x 3/8. Weight of each floor jack pad: 150g. Set of 6.
- Fits most Floor Jacks and vehicles. Yesland's jack pad adapter fits most jacks and vehicles and can work great with a jack stand. The jack puck is soft enough to absorb the car weight while strong enough to support the car.
- Groove design. The grooves of car lift jack pad work nice to protect your car and the body seam goes in and sits nice on the jack. The pinch weld slots on the pad are really nice as they are deep and hug the pinch welds.
- Anti-slip. The rubber pad adds extra grip when raising the car and reduce slipping, it is stable.
- See more on Amazon...
Brand: Yesland | Manufacturer: Yesland
Dimensions: 1.00 x 3.00 x 3.00 Inches | Weight: 0.33 Pounds
See On Amazon #14
BELOMI Jack Stand Pads, 2 Pcs 3 Ton Jack Pad Adapter, Universal Rubber Slotted Frame Rail Pinch Welds Protector Pad for Jack Stand Support Lift, Car Accessories for Sedan, SUV and More
Asin: B0C5QRJSRT | Model: Jack Stand Pad | PartNumber: Jack Stand Pad
【Car Chassis Protection】: Our Jack Stand Pads Can Provide A Good Protective Cushion Between Your Car Frame Rails And Jack, A Very Practical Protection Device That Can Effectively Prevent The Frame Rails (Especially The Pinch Welds) From Bending Or Scratching When Using Car Jack Stands..
【Easy To Use】: Place It In The Gap Between The Jack's Lift Arm And The Vehicle Skirt, And Just Align Its Upper And Lower Slots With The Jack And The Car Frame Rail. It Is Very Strong Bearing Capacity, Do Not Worry About The Strong Pressure Will Be Deformed And Broken. Removal Is Also Simple And Quick, Soft Material, Will Not Hurt The Car Or Leave Marks..
【Widely Used】: The Size Of The Jack Bow Rubber Cushion Is 2.5 * 1.7 * 2(L * W * H) Inches. The Top Narrow Slot Is 0.7 Inches Deep And 0.3 Inches Wide At The Narrowest Point. The Bottom Wide Slot Is 1.1 Inches Wide And 1.1 Inches Deep At Its Deepest Point. Can Be Widely Applied To Most Jacks And Vehicles, Can Be Used For Household Car Equipment Shock Absorption, Such As Sedan, Suv And More Light Vehicles..
【Shock Absorption And Noise Reduction】: Good Elasticity, Strong Load Capacity, Maximum Load Capacity Of 3 Tons, Play A Good Cushioning And Shock Absorption. Tough And Strong Enough To Support Your Car, While Soft Enough To Resist The Pressure Of Jack Stands. In Addition To Reducing The Vibration Between The Metal Car Tracks And The Jack, It Also Protects Painted Or Coated Suspension Parts..
Features
- Soft Rubber : Jack stand pad is made of rubber material, smooth surface, use does not hurt the car does not hurt your hands. Firm structure, strong elasticity, easy to return to shape, resistant to wear and tear, can be used for a long time. It will be used with jack stands to provide soft and strong support and protection for the car frame track.
- Shock Absorption and Noise Reduction : Good elasticity, strong load capacity, maximum load capacity of 3 tons, play a good cushioning and shock absorption. Tough and strong enough to support your car, while soft enough to resist the pressure of jack stands. In addition to reducing the vibration between the metal car tracks and the jack, it also protects painted or coated suspension parts.
- Car Chassis Protection : Our jack stand pads can provide a good protective cushion between your car frame rails and jack, a very practical protection device that can effectively prevent the frame rails (especially the pinch welds) from bending or scratching when using car jack stands.
- Widely Used : The size of the jack bow rubber cushion is 2.5 * 1.7 * 2(L * W * H) inches. The top narrow slot is 0.7 inches deep and 0.3 inches wide at the narrowest point. The bottom wide slot is 1.1 inches wide and 1.1 inches deep at its deepest point. Can be widely applied to most jacks and vehicles, can be used for household car equipment shock absorption, such as sedan, SUV and more light vehicles.
- Easy to Use : Place it in the gap between the jack's lift arm and the vehicle skirt, and just align its upper and lower slots with the jack and the car frame rail. It is very strong bearing capacity, do not worry about the strong pressure will be deformed and broken. Removal is also simple and quick, soft material, will not hurt the car or leave marks.
- See more on Amazon...
Brand: BELOMI | Manufacturer: BELOMI
Dimensions: 0.80 x 1.00 x 0.70 Inches
Warranty: 0.2
See On Amazon #15
Jack Rubber Pad Adapter,Jack Stand Universal Heavy Duty Rubber,Slotted Frame Rail Pinch Welds Protector Floor Jack Pad Adapter(4 Pack)
Asin: B0BC8XZX59 | Model: J-19042531 | PartNumber: J-19042531
【Safe & Heavy Duty Construction】The Middle Groove Design Provides More Cushioning And Extrusion Resistance.The Maximum Load Is 2-4 Tons..
【12-Month Warranty】The Jack Rubber Pad Adapter Come With 12 Months Warranty. Hassle-Free Return And Refund Policy. Please Buy It With Your Confidence..
【Premium Quality】Made Of High Quality Material. Tested & Certified To Meet Or Exceed Oem Quality Standards..
【Compatiblity】The Rubber Jack Pad Adapter Fits Most Jacks And Vehicles,Compatible With Torin Big Red T43002. But Not Fit For Torin T42002..
Features
- Function The Jack Stand Pads are Designed to Protect your Car When you Use a Car Jack. It Will Prevent your Frame Rails and Nips from Flexing When Using the Jack to Lift the Car, and Will Also Protect Painted or Coated Suspension Components.
- Compatiblity The Rubber Jack Pad Adapter fits Most Jacks and Vehicles,Compatible With Torin Big Red T43002. But NOT Fit for Torin T42002.
- Safe & Heavy Duty Construction The Middle Groove Design Provides More Cushioning and Extrusion Resistance.The Maximum Load is 2-4 Tons.
- Premium Quality Made of High Quality Material. Tested & Certified to Meet or Exceed OEM Quality Standards.
- 12-Month Warranty The Jack Rubber Pad Adapter come with 12 Months Warranty. Hassle-free Return and Refund Policy. Please Buy it with Your Confidence.
- See more on Amazon...
Brand: VASTAUTO | Manufacturer: VASTAUTO
Warranty: 12 months
See On Amazon #16
HXXF 2 Types Jack Stand Pads Adapter 4 Ton Universal Rubber Slotted Frame Rail Pinch welds Protector for Jack Stand (Black)
Asin: B07S7L2WTL | Model: 35232 | PartNumber: 35232 | Ean: 0653445783733 | UPC: 653445783733
【Safe & Heavy Duty】 Made Of Durable Rubber Material, Maximum Load Bearing Is 3 Tons.Jack Stand Rubber Pad Adapter Is Designed To Be Sturdy Enough To Support Your Car While Soft Enough To Resist Pressure For Your Jack Stand..
【Promise】We Stand By And Believe In Our Products, Hxxf Provide You Friendly Customer Service.If You Are Not 100% Satisfied,Please Feel Free To Contact With Us,We Will Find A Solution Together And Make It A Great Shopping Experience..
【Universal】We Have Specified Jack Pads' Dimension On The Picture, Please Check Your Jack's Size/Dimension Before Your Purchase. The Jack Pad Adapter Fits Most Jacks And Vehicles And Can Work Great With Jack Stand, Specifically Compatible With Torin Big Red T43002. But Not Fit For Torin T42002..
【Best Protection】This Jack Pad Adapter Is A Great Protector To Prevent Your Frame Rail, Specifically Pinch Welds From Bending Or Scratching While Using With A Car Jack Stand..
Features
- Round Type Jack Pads: 75mm Diameter 35mm Height, Slot Dimensions: 10mm Wide 15mm deep. V-Type Jack Pads: Length-63mm, Hight-50mm, Width-44mm, Groove depth-17mm
- BEST PROTECTION This jack pad adapter is a great protector to prevent your frame rail, specifically pinch welds from bending or scratching while using with a car jack stand.
- SAFE & HEAVY DUTY Made of durable rubber material, Maximum Load Bearing is 3 Tons.Jack stand rubber pad adapter is designed to be sturdy enough to support your car while soft enough to resist pressure for your jack stand.
- UNIVERSAL We have specified jack pads' dimension on the picture, Please check your jack's size/dimension before your purchase. The jack pad adapter fits most jacks and vehicles and can work great with jack stand, specifically compatible with Torin Big Red T43002. But NOT fit for Torin T42002.
- PROMISE We stand by and believe in our products, HXXF provide you friendly customer service.If you are not 100% satisfied,please feel free to contact with us,we will find a solution together and make it a great shopping experience.
- See more on Amazon...
Brand: HXXF | Manufacturer: Lovit
Dimensions: 1.75 x 2.50 x 2.00 Inches | Weight: 1.00 Pounds
See On Amazon #17
2Pcs Rubber Jack Pads (Slotted Pucks)-Universal Jack Stand Pad Adapter Pinch Weld Side Frame Rail Protector,Frame Rail Protector Puck/Pad Keeps Pinch Weld, Paint and Metal Safe
Asin: B0C2CD9NRV
【Size Information】Floor Jack Rubber Pad Dimensions : Pad Dimensions: 7.2 Cm / 2.8 Inches In Diameter, 3.3Cm / 1.3 Inches Tall..
【Service】- 2 Pack Jack Stand Pads(If You Have Any Questions About Our Products, Please Get In Touch With Us In Time, We Will Solve The Problem For You As Soon As Possible).
【Universal For Most Car 】The Jack Pad Adapter Fits Most Jacks And Vehicles And Can Work Great With Jack Stand, Their Universal Size Allows Them To Meet A Wide-Array Of Needs, Though Exact Fit Will Vary..
【Great Little Tool】Our Jack Pads Sit On Top Of Your Jacks To Provide Protection And Cushion When Lifting Your Car, This Jack Stand Adapter Allows You To Lift The Car From The Jack Point Without Bending That Metal Strip.It Also Helps To Add Extra Grip To Your Jack To The Car And Height..
Features
- Durable Material Floor jack rubber pad is made of durable rubber material for last long.our jack pads are built to hold up to the rigorous needs of mechanics and DIY enthusiasts, alike, Note:This jack pad maybe will have a little bit rubber smell when new.Please put it outside to ventilate some while.
- Great Little Tool Our jack pads sit on top of your jacks to provide protection and cushion when lifting your car, this jack stand adapter allows you to lift the car from the jack point without bending that metal strip.It also helps to add extra grip to your jack to the car and height.
- Size Information Floor Jack Rubber Pad Dimensions : Pad dimensions: 7.2 cm / 2.8 inches in diameter, 3.3cm / 1.3 inches tall.
- Universal for Most Car The jack pad adapter fits most jacks and vehicles and can work great with jack stand, Their universal size allows them to meet a wide-array of needs, though exact fit will vary.
- Service - 2 Pack Jack Stand Pads(If you have any questions about our products, Please get in touch with us in time, We will solve the problem for you as soon as possible)
- See more on Amazon...
Brand: stymart | Manufacturer: stymart
See On Amazon #18
A ABIGAIL 2PCS Universal Jack Pad Slotted Rubber Jack Pad Medium Size - Frame Rail Protector Puck/Pad Keeps Pinch Weld
Asin: B08FJ3WGFQ
【Pad Dimensions】71Mm / 2.8 Inches In Diameter, 33Mm / 1.3 Inches Height, Slot Dimensions: 13Mm / 0.5 Inches Wide 13Mm / 0.5 Inches Deep..
【Service】100% Satisfaction Guarantee. If You Have Any Issues With The Product, Just Contact Us For Troubleshooting Help, Replacement, Or Refund. Our Aim Is To Make You Satisfy The Parts And The Service We Provide..
【Maximum Load Bearing】 2-4 Ton, Medium Size And Shape Fits Most Jacks And Vehicles, Please Verify Dimensions And Ensure Fitment To Your Vehicle..
【Function】A Abigail Jack Pad Is Designed To Be Sturdy Enough To Support Your Lift Point While Soft Enough To Preventing Pinch Weld Seams And Frame Rails From Bending Or Breaking When Jacking Up Your Car..
Features
- High Quality Made from highly durable rubber which will provide more cushion and crush resistance. This rubber jack pad may smell a little bit stinks when it's new. Please do not mind it.
- Function A ABIGAIL Jack Pad is designed to be sturdy enough to support your lift point while soft enough to preventing pinch Weld Seams and Frame Rails from bending or breaking when jacking up your car.
- Pad Dimensions 71mm / 2.8 inches in diameter, 33mm / 1.3 inches height, Slot Dimensions: 13mm / 0.5 inches Wide 13mm / 0.5 inches deep.
- Maximum Load Bearing 2-4 Ton, medium size and shape fits most jacks and vehicles, please verify dimensions and ensure fitment to your vehicle.
- Service 100% satisfaction guarantee. If you have any issues with the product, just contact us for troubleshooting help, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide.
- See more on Amazon...
Brand: A ABIGAIL | Manufacturer: A ABIGAIL
Dimensions: 1.00 x 3.00 x 6.00 inches | Weight: 0.64 Pounds
See On Amazon #19
A ABIGAIL 4 Pack Jack Rubber Pad Adapter for Jack Stand Universal Rubber Slotted Frame Rail Pinch welds Protector 2 Types Sparta Floor Jack Pad Adapter
Asin: B08Q7NVWD5
【Perfect Design】The Rubber Pad Adds Extra Grip When Raising The Car And Reduce Slipping, It Is Stable And Suitable For Any Type Of Body And Jack Like Unitec, Michelin Etc. Also Keeps The Chassis Rails From Getting Bruised, Bent Or Broken..
【Service】100% Satisfaction Guarantee. If You Have Any Issues With The Product, Just Contact Us For Troubleshooting Help, Replacement, Or Refund. Our Aim Is To Make You Satisfy The Parts And The Service We Provide..
【High Quality】Made From Highly Durable Rubber And Cross Slotted Design Which Will Provide More Cushion And Crush Resistance., Maximum Load Bearing 2-4 Ton..
【Application】The Jack Pad Adapter Fits Most Jacks And Vehicles And Can Work Great With Jack Stand, Specifically Compatible With Torin Big Red T43002. But Not Fit For Torin T42002..
Features
- Best Protection for Your Car Undercarriage Jack Stand Pad is specifically designed to protect the car when you use a car jack. It will prevent your frame rails and pinch welds from bending when using a Jack to lift your car, can also protect painted or coated suspensions components.
- Application The jack pad adapter fits most jacks and vehicles and can work great with jack stand, specifically compatible with Torin Big Red T43002. But NOT fit for Torin T42002.
- Perfect Design The rubber pad adds extra grip when raising the car and reduce slipping, it is stable and suitable for any type of body and Jack like Unitec, Michelin etc. Also keeps the chassis rails from getting bruised, bent or broken.
- High Quality Made from highly durable rubber and cross slotted design which will provide more cushion and crush resistance., Maximum Load Bearing 2-4 Ton.
- Service 100% satisfaction guarantee. If you have any issues with the product, just contact us for troubleshooting help, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide.
- See more on Amazon...
Brand: A ABIGAIL | Manufacturer: A ABIGAIL
Dimensions: 1.00 x 6.00 x 6.00 Inches
See On Amazon
Looking For Something Else?
Search