3pcs Type C BMS 2S 3S 4S 1A 2A 4A 18650 Lithium Battery Charger Board USB C Step-up Boost Module for Li-Po Polymer Power Bank(3pcs 3S 4A)
Asin: B0BZC7TWC7 | Ean: 0701715520806 | UPC: 701715520806
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Protection For Battery Voltage Being Low Than Input And Short Battery Good Adaptability To Input Supply With Limited Driving Capability.
Led Indicator : ''Cr'' Led Is Charge Status Indicator ''Ok'' Led Is Fully Charged Or Constant Voltage Mode;.
Size :39Mm X 18Mm X 6.3Mm;Weight : 5G; Battery Overvoltage Protection.
Input Type-C 5V; Operating Temperature－40℃ To ＋85℃;.
Features
- 3PCS Multi-Cell 2S 3S 4S Type-C to 8.4V 12.6V 16.8V Step-Up Boost LiPo Polymer Li-Ion Charger 7.4V 11.1V 14.8V 18650 Lithium Battery (3S-4A)
- Input Type-C 5V; Operating Temperature 40 to 85 ;
- Protection for Battery Voltage Being Low than Input and Short Battery Good adaptability to Input Supply with Limited Driving Capability
- Size :39mm x 18mm x 6.3mm;Weight : 5g; Battery Overvoltage Protection
- Led indicator : ''CR'' LED is charge status indicator ''OK'' LED is fully charged OR Constant voltage mode;
- See more on Amazon...
Brand: Dweii | Manufacturer: Dweii
Weight: 0.01 pounds
See On Amazon Similar To 3pcs Type C BMS 2S
#1
2Pcs 3S 11.1V 12.6V 25A W/Balance 18650 Li ion Lithium Battery PCB Protection Board
Asin: B07JMY631D | Model: Z370*2 | PartNumber: Z370*2
Wiring:(Please Check The Picutre 3 Wiring Diagram)Strictly According To The Diagram Wiring: 0V(B )3.7V(B1)7.4V(B2)11.1V(B+), Do Not Deliberately Short Circuit. After The Line Is Connected, Need To Charge First, Then Have Output..
Attention: Do Not Mix The Good Battery And Poor Battery To Use. The Internal Resistance Of 3 Battery Capacity Are Closer Will Be Better..
When The Battery Is Connected In Series With 3 Groups, Please Ensure That The Voltage Of Each Battery Is The Same. If Not Same, Please Fill In Each Set Of Batteries And Then Use. Do Not Mix The Good Battery And The Battery..
Maximum Operating Current: 0-25A ;Maximum Transient Current: 34-40A.
Features
- Over voltage range: 4.25-4.35v 0.05v; Over discharge voltage range: 2.3-3.0v 0.05v
- Maximum operating current: 0-25A ;Maximum transient current: 34-40A
- Wiring:(please check the picutre 3 wiring diagram)Strictly according to the diagram wiring: 0V(B )3.7V(B1)7.4V(B2)11.1V(B+), Do not deliberately short circuit. After the line is connected, Need to charge first, then have output.
- When the battery is connected in series with 3 groups, Please ensure that the voltage of each battery is the same. If not same, please fill in each set of batteries and then use. Do not mix the good battery and the battery.
- Attention: Do not mix the good battery and poor battery to use. The internal resistance of 3 battery capacity are closer will be better.
- See more on Amazon...
Brand: daier | Manufacturer: daier
Weight: 0.03 pounds
See On Amazon #2
MakerFocus 15pcs TP4056 Charging Discharging Module Type C Interface with Battery Protection 18650 BMS 5V 1A 18650 Lithium Battery Charging Board
Asin: B0CWNXKR4X | Model: P9S8R16X4908HWS025JI | PartNumber: P9S8R16X4908HWS025JI
Application: Tp4056 Module Can Charge For Single-Cell Lithium Battery Or Multi-Section Parallelled Lithium Batteries, Can Be Powered By Usb Ports; The Module With Usb Port, Can Be Directly Input To Do With Rechargeable Lithium Battery As A Phone Charger.
Attention: The Charge Should Disconnect The Load Out Terminal On The Positive And Negative Can Not Be Wrong, Please According To Specifications, Otherwise It Will Damage Directly.
Reminder: Please Check All The Connections Before Charging, It Will Be Damaged If The Load Out On The Positive And Negative With Wrong Polarity. If You Do This The First Time, Please Watch The Video On Youtube Before Installation.
Note: When First Accessing The Battery, There May Be No Voltage Output Between Out+/Out-, At This Time Access To 5V Charging Can Activate The Protection Circuit, The Battery Is Disconnected From B+/B- And Then Connected Again Also Need To Be Charged To Activate The Protection Circuit. When Using A Mobile Phone Charger As Input, The Charger Should Be Able To Output 1A Or Above, Otherwise It May Not Charge Properly..
Usage: The +/- Pads Are The Power Inputs, Access To 5V. B+ Connects To The Positive Pole, B- Connects To The Negative Pole, Out+ And Out- Connects To The Loads, Such As Connecting To The Positive And Negative Pole Of The Mobile Booster Board Or Other Loads.
Features
- Upgrade Version: The input has a Type C female connector, which can be directly input as a mobile phone charger to recharge the lithium battery; The input voltage wiring pad is also reserved, which can be very convenient for DIY
- Usage: The +/- pads are the power inputs, access to 5V. B+ connects to the positive pole, B- connects to the negative pole, OUT+ and OUT- connects to the loads, such as connecting to the positive and negative pole of the mobile booster board or other loads
- Application: TP4056 module can charge for single-cell lithium battery or multi-section parallelled lithium batteries, can be powered by USB ports; The module with USB port, can be directly input to do with rechargeable lithium battery as a phone charger
- Note: When first accessing the battery, there may be no voltage output between OUT+/OUT-, at this time access to 5V charging can activate the protection circuit, the battery is disconnected from B+/B- and then connected again also need to be charged to activate the protection circuit. When using a mobile phone charger as input, the charger should be able to output 1A or above, otherwise it may not charge properly.
- Attention: The charge should disconnect the load OUT terminal on the positive and negative can not be wrong, please according to specifications, otherwise it will damage directly
- Reminder: Please check all the connections before charging, it will be damaged if the load OUT on the positive and negative with wrong polarity. If you do this the first time, please watch the video on Youtube before installation
- See more on Amazon...
Brand: MakerFocus | Manufacturer: MakerFocus
Dimensions: 2.00 x 2.70 x 0.90 inches
Warranty: No Warranty
See On Amazon #3
Comidox 3S 12V 10A 18650 Lithium Battery Protection Board BMS Li-ion Charger Protection Module Anti-Overcharge/Over-Discharge/Over-Current/Short Circuit 3Pcs
Asin: B07J9NXQ6W | Model: CP219 | PartNumber: CP219 | Ean: 0661083377344 | UPC: 661083377344
High Quality Mosfets Such As Vishay, Aos, Ir, Etc., Fr-4 Low Temperature Coefficient Sheet, Well Designed And Tested..
This Protection Board Can Not Be Used For Iron Ion Polymer Battery, Hand Drill Battery Pack, Electric Fish Battery Pack, Electric Bicycle Battery Pack, 2 Pieces And 24V Series, 775 (4A) Or Above Motor, 1W Fisheye Led Lamp..
It Is Small In Size And Suitable For Many Applications Requiring High Integration And Low Cost. It Can Meet Various Performance Requirements And Ensure The Absolute Safety And Reliability Of The Battery Pack..
With Overcharge, Over Discharge, Over Current, Short Circuit And Other Protection Functions, For A Variety Of Shapes Of Various Shapes 3.7V Lithium Battery..
Features
- The power range described is applicable to the following products: vacuum cleaner, massager battery pack, LED light backup power supply, 12V electronic products, solar street light battery pack, monitoring standby power supply, etc.
- With overcharge, over discharge, over current, short circuit and other protection functions, for a variety of shapes of various shapes 3.7V lithium battery.
- High quality MOSFETs such as VISHAY, AOS, IR, etc., FR-4 low temperature coefficient sheet, well designed and tested.
- It is small in size and suitable for many applications requiring high integration and low cost. It can meet various performance requirements and ensure the absolute safety and reliability of the battery pack.
- This protection board can not be used for iron ion polymer battery, hand drill battery pack, electric fish battery pack, electric bicycle battery pack, 2 pieces and 24V series, 775 (4A) or above motor, 1W fisheye LED lamp.
- See more on Amazon...
Brand: Comidox | Manufacturer: Comidox
See On Amazon #4
Bisida 10S BMS 36V 30A Li-ion PCB Protection Board with Balance Wire and NTC, Ten Functional protections, Split Ports, for Lithium-ion Battery Pack (10S 36V 30A)
Asin: B0CC1BMDD1 | Model: 10S 36V 30A | PartNumber: 10S 36V 30A | Ean: 0749755110366 | UPC: 749755110366
【Preparation Before Installation】Before Installing The Bms Protective Board, It Is Necessary To Match The Voltage, Capacity, And Internal Resistance (The Voltage Difference Between The Battery Per Section Is Not Higher Than 0.05V, The Difference Between The Internal Resistance Is Not More Than 5Mω, And The Capacity Difference Is Less Than 30Mah). Otherwise The Battery Pack Will Not Be Able To Charge..
【High Quality】Bisida's Bms Utilizes Top Quality (A-Level) Protective Integrated Circuit Ic, From The Solution Of Industry Car Level.Bms Manufactured By High Quality Mos And Ic Imported.Support Oem/Odm Customization, If You Have Special Needs, You Can Contact Customer Service..
【Wiring Method】The Wiring Methods Of Split Ports Of Bms: B- Connection Battery Pack Negative, C- Connection Charging Negative, P- Connection Output Negative. All The Positive Electrodes Are The Total Positive Pole From The Battery Pack..
【Operating Temperature】Bisida's Bms Supports (3.7V) Lithium-Ion Battery Charging And Discharging In Zones From 2.65V To 4.25V, With Low Temperature Protection Up To -20°C And High Temperature Protection Up To 70°C. Different Voltages And Currents Have Different Parameter Details. Confirmation Required. Please Communicate With The Seller To Confirm Accurate Data..
Features
- Multi -Function Protection Bisida's BMS has a variety of protection functions, such as over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection, isconnect protection, Voltage balance(passive balance), etc.
- Operating Temperature Bisida's BMS supports (3.7V) lithium-ion battery charging and discharging in zones from 2.65V to 4.25V, with low temperature protection up to -20 C and high temperature protection up to 70 C. Different voltages and currents have different parameter details. Confirmation required. Please communicate with the seller to confirm accurate data.
- Preparation Before Installation Before installing the BMS protective board, it is necessary to match the voltage, capacity, and internal resistance (the voltage difference between the battery per section is not higher than 0.05V, the difference between the internal resistance is not more than 5M , and the capacity difference is less than 30mAh). Otherwise the battery pack will not be able to charge.
- Wiring Method The wiring methods of Split Ports of BMS: B- connection battery pack negative, C- connection charging negative, P- connection output negative. All the positive electrodes are the total positive pole from the battery pack.
- High Quality Bisida's BMS utilizes top quality (A-level) protective integrated circuit IC, from the solution of Industry car level.BMS manufactured by high quality Mos and IC imported.Support OEM/ODM customization, if you have special needs, you can contact customer service.
- See more on Amazon...
Brand: Bisida | Manufacturer: Bisida
Warranty: 1 Year
See On Amazon #5
HiLetgo 14.8V 4S 30A 18650 Li-ion Lithium Battery BMS PCB Integrated Circuits Protection Board Cell Balance
Asin: B07X28845M | Model: 3-01-1548 | PartNumber: 3-01-1548
Working Current: 30A .Charging Voltage: 16.8V-18V,The Best Is 17V.Size:56*48*4Mm..
Main Function: Over Charge Protection, Over Discharge Protection Function, Short Circuit Protection Function, Over Current Protection Function, Balance..
High-Accuracy Voltage Detection Circuit, Fine Workmanship And Durable..
Features
- 14.8V 4S 30A 18650 Li-ion Lithium Battery BMS PCB Integrated Circuits Protection Board Cell Balance.
- High-accuracy voltage detection circuit, fine workmanship and durable.
- Working current: 30A .Charging voltage: 16.8V-18V,the best is 17v.Size:56*48*4mm.
- Main function: Over charge protection, over discharge protection function, short circuit protection function, over current protection function, balance.
- See more on Amazon...
Brand: HiLetgo | Manufacturer: HiLetgo
See On Amazon #6
3S 12V 40A PCB BMS Protection Board for 18650 Li-ion Lithium Battery Cell Module
Asin: B0B314FQ8N | Ean: 0701715534964 | UPC: 701715534964
Support Overcharge Protection,Overdischarge Protection,Overcurrent Protection And Short Circuit Protection..
Stable Charging And Discharging The Various Protection Features Such As Precise Overcharge Protection,Overdischarge Protection,Overcurrent Protection And Short Circuit Protection..
This Protection Board Is Suitable For 3 Series 3.7V 18650 Li-Ion Cell.Charging Connector And Discharging Connector Are Separated..
The Protection Board Is For Cell Li-Ion Batteries, It Can Be Used For Ternary Batteries, Manganese Acid Batteries And Cobalt Acid Batteries..
Features
- This protection board is suitable for 3 series 3.7V 18650 li-ion cell.
- The protection board is for cell Li-ion batteries, it can be used for ternary batteries, manganese acid batteries and cobalt acid batteries.
- Support overcharge protection,overdischarge protection,overcurrent protection and short circuit protection.
- This protection board is suitable for 3 series 3.7V 18650 Li-ion cell.Charging connector and discharging connector are separated.
- Stable charging and discharging the various protection features such as precise overcharge protection,overdischarge protection,overcurrent protection and short circuit protection.
- See more on Amazon...
Manufacturer: AOICRIE
Weight: 0.26 pounds
See On Amazon #7
36V 35A 10Series Cell Li Ion Batteries BMS PCB Board with Balancing Overcharge for Li-ion Battery Cell Pack, Ternary, Manganese Acid and Cobalt Acid Batteries
Asin: B075MDQ92X | Model: Walfrontu1y8fwvpsg | PartNumber: Walfrontu1y8fwvpsg | Ean: 0736691576042 | UPC: 736691576042
Wide Battery Compatibility: Our Board Is Suitable For Li Ion Batteries Of Ternary, Manganese Acid, And Cobalt Acid Batteries. A Versatile Solution For A Variety Of Battery Types..
Durable And Reliable: Built To Withstand Long-Term Use, Ensuring For Your Batteries Without Compromising Performance. Invest In The Health Of Your Batteries Through Our Durable And Dependable Board..
User-Friendly: Easy Installation And Straightforward Operation. Our Board Aims To Make Your Battery Use A Hassle- Experience. A Must-Have Accessory For Maintaining Your Batteries' Health..
Advanced Balancing System: Our Product Features An Intricate Balancing System To Maintain Your Batteries In Perfect Harmony Ensuring Their Optimal Functionality And Longevity..
Features
- High-Quality : 36V 35A 10Series Cell Li Ion Batteries BMS PCB Board offers top-rate overcharge for 10 Series Cell Li Ion Batteries. Efficient in shielding your Ternary, Manganese Acid, and Cobalt Acid Batteries from potential damages.
- Advanced Balancing System: Our product features an intricate balancing system to maintain your batteries in perfect harmony ensuring their optimal functionality and longevity.
- Wide Battery Compatibility: Our Board is suitable for Li Ion Batteries of Ternary, Manganese Acid, and Cobalt Acid Batteries. A versatile solution for a variety of battery types.
- User-Friendly: Easy installation and straightforward operation. Our Board aims to make your battery use a hassle- experience. A must-have accessory for maintaining your batteries' health.
- Durable and Reliable: Built to withstand long-term use, ensuring for your batteries without compromising performance. Invest in the health of your batteries through our durable and dependable board.
- See more on Amazon...
Brand: Walfront | Manufacturer: Walfront
Dimensions: 0.00 x 0.00 x 0.00 inches | Weight: 0.11 Pounds
See On Amazon #8
Bisida 16S BMS 60V 30A Li-ion PCB Protection Board with Balance Wire and NTC,Ten Functional protections, Common Port, for Solar Energy Storage, Balance Car Lithium-ion Battery Pack (16S 60V 30A)
Asin: B0CC2N3PWF | Model: 16S 60V 30A | PartNumber: 16S 60V 30A | Ean: 0749755120969 | UPC: 749755120969
【Preparation Before Installation】Before Installing The Bms Protective Board, It Is Necessary To Match The Voltage, Capacity, And Internal Resistance (The Voltage Difference Between The Battery Per Section Is Not Higher Than 0.05V, The Difference Between The Internal Resistance Is Not More Than 5Mω, And The Capacity Difference Is Less Than 30Mah). Otherwise The Battery Pack Will Not Be Able To Charge..
【High Quality】Bisida's Bms Utilizes Top Quality (A-Level) Protective Integrated Circuit Ic, From The Solution Of Industry Car Level.Bms Manufactured By High Quality Mos And Ic Imported.Support Oem/Odm Customization, If You Have Special Needs, You Can Contact Customer Service..
【Wiring Method】The Wiring Methods Of Common Ports Of Bms: B- Connection Battery Pack Negative , C- Connection Charging Negative/Output Negative. All The Positive Electrodes Are The Total Positive Pole From The Battery Pack..
【Operating Temperature】Bisida's Bms Supports (3.7V) Lithium-Ion Battery Charging And Discharging In Zones From 2.65V To 4.25V, With Low Temperature Protection Up To -20°C And High Temperature Protection Up To 70°C. Different Voltages And Currents Have Different Parameter Details. Confirmation Required. Please Communicate With The Seller To Confirm Accurate Data..
Features
- Multi -Function Protection Bisida's BMS has a variety of protection functions, such as over charge protection, over discharge protection, over current protection, short-circuit protection, temperature protection, isconnect protection, Voltage balance(passive balance), etc.
- Operating Temperature Bisida's BMS supports (3.7V) lithium-ion battery charging and discharging in zones from 2.65V to 4.25V, with low temperature protection up to -20 C and high temperature protection up to 70 C. Different voltages and currents have different parameter details. Confirmation required. Please communicate with the seller to confirm accurate data.
- Preparation Before Installation Before installing the BMS protective board, it is necessary to match the voltage, capacity, and internal resistance (the voltage difference between the battery per section is not higher than 0.05V, the difference between the internal resistance is not more than 5M , and the capacity difference is less than 30mAh). Otherwise the battery pack will not be able to charge.
- Wiring Method The wiring methods of Common ports of BMS: B- connection battery pack negative , C- connection charging negative/output negative. All the positive electrodes are the total positive pole from the battery pack.
- High Quality Bisida's BMS utilizes top quality (A-level) protective integrated circuit IC, from the solution of Industry car level.BMS manufactured by high quality Mos and IC imported.Support OEM/ODM customization, if you have special needs, you can contact customer service.
- See more on Amazon...
Brand: Bisida | Manufacturer: Bisida
Warranty: 1 year
See On Amazon #9
MELIFE 5PCS BMS 5S 25A 21V Battery Protection Board for Lithium Battery Protection Circuit Charging Board Module Integrated Circuits.
Asin: B0BHYWB8BQ | Model: PCB | PartNumber: PCB | Ean: 0701715529205 | UPC: 701715529205
Before Installing The Protection Board,The Voltage Difference Between Each Battery Is Not Higher Than 0.05V, The Internal Resistance Is Not More Than 5Mω, The Difference Of The Capacitance Is Less Than 30Mah.
Noted:This Protective Plate Cannot Be Used For Lithium Iron Phosphate Batteries. Lithium Battery Protection Board Is Strictly Prohibited To Be Used In Series..
When Connecting 2 Sets Of Batteries In Series, Please Ensure That The Voltage Of Each Set Of Batteries Is The Same. If They Are Different, Please Fill Each Set Of Batteries Separately And Use Them In Series..
Overcharge Protect Current: 60A;Over-Discharge Protect Current: 60A;Over-Discharge Protectdelay: 0.5 - 1.5S..
Features
- 18650 Lithium Battery Protection Board:Charging Current: 25A;Charging Voltage : 21V for 5S BMS Board.
- Overcharge protect current: 60A;Over-discharge protect current: 60A;Over-discharge protectdelay: 0.5 - 1.5S.
- Before installing the protection board,the voltage difference between each battery is not higher than 0.05V, the internal resistance is not more than 5m , the difference of the capacitance is less than 30mAh
- When connecting 2 sets of batteries in series, please ensure that the voltage of each set of batteries is the same. If they are different, please fill each set of batteries separately and use them in series.
- Noted:This Protective Plate Cannot be used for Lithium Iron Phosphate Batteries. Lithium Battery Protection Board is Strictly Prohibited to be Used in Series.
- See more on Amazon...
Brand: MELIFE | Manufacturer: MELIFE
Warranty: 6 months
See On Amazon #10
Alinan 6pcs 3S 8A 12V 18650 Lithium Battery Protection Board 10.8V 11.1V 12.6V BMS PCM PCB Overcharge Over-Discharge Protection Module for 3 Li-ion Cell Pack
Asin: B0B5T1ZCTX | Ean: 0701715521421 | UPC: 701715521421
★Compact Size And Lightweight, Fine Workmanship And Durable, Stable Performance..
【Note】: Please According To The Diagram Wiring To Avoid Possible Damage To The Chip. After Connection, It Need To Charge Activation First, Then Will Have The Output..
【Applications】: For 10.8V(3.6V*3S) Lithium Battery & Packs; 11.1V(3.7V*3S) Lithium Battery & Packs; 12.6V(4.2V*3S) Lithium Battery & Packs..
【Multiple Protections】: Short Circuit Protection, Overcharge Protection, Over-Discharge Protection And Over Current Protection..
Features
- Lithium Battery Operating Voltage : 10.8V~12.6V
- Multiple Protections : Short circuit protection, overcharge protection, over-discharge protection and over current protection.
- Compact size and lightweight, fine workmanship and durable, stable performance.
- Applications : for 10.8V(3.6V*3S) lithium battery & packs; 11.1V(3.7V*3S) lithium battery & packs; 12.6V(4.2V*3S) lithium battery & packs.
- Note : Please according to the diagram wiring to avoid possible damage to the chip. After connection, it need to charge activation first, then will have the output.
- See more on Amazon...
Brand: Alinan | Manufacturer: Alinan
Warranty: others
See On Amazon
Looking For Something Else?
Search