7Pcs YOOPAI Ender 3 Thermistor NTC 100K ohm, 24V 40W Heater Cartridge Upgrade Kit for Creality Ender 3, Ender 3 pro, Ender 3 v2, CR-10 10S, Prusa Mendel, 3D Printer Thermistor Temp Sensor
Asin: B0BZGPTD1K | Model: 5T+2C | PartNumber: 5T+2C
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Temperature Monitor】The Ntc Thermistor Monitors The Temperature Of The Heating Bed And Extruder Hotend, Ensuring Precise Temperature Control For Different Parts Of The Printer..
【After-Sales Service】 Life-Time Professional Technical Supports, If You Encounter Unsolvable Problems During Installation And Use, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
【Safe Operation】The 24V 40W Heater Cartridge Features Over-Temperature Protection To Prevent Overheating And Potential Damage To The Printer, Ensuring Safe Operation..
【Economical And High Quality】The Value Pack Contains Multiple Units, Making It A Cost-Effective Solution For Users Who Need To Replace Thermistors And Heater Cartridges. The Heater Cartridge Is Made From Durable Stainless Steel And High-Temperature Resistant Wire To Prevent Frequent Replacements And Reduce Downtime..
Features
- Multiple Models Compatible The NTC Thermistor and 24V 40W heater cartridge is compatible with Creality Ender 3/ Ender 3 Pro/ Ender 3 V2/ Ender 3 Neo/ Ender 5/ Ender 5 Pro/ CR-10/ CR-10S/ Anet A8 and others 3D printer.
- Economical and High Quality The value pack contains multiple units, making it a cost-effective solution for users who need to replace thermistors and heater cartridges. The heater cartridge is made from durable stainless steel and high-temperature resistant wire to prevent frequent replacements and reduce downtime.
- Temperature Monitor The NTC Thermistor monitors the temperature of the heating bed and extruder hotend, ensuring precise temperature control for different parts of the printer.
- Safe Operation The 24V 40W heater cartridge features over-temperature protection to prevent overheating and potential damage to the printer, ensuring safe operation.
- After-Sales Service Life-time professional technical supports, If you encounter unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: YOOPAI | Manufacturer: Yoopai
See On Amazon Similar To 7Pcs YOOPAI Ender 3 Thermistor
#1
Comgrow 25PCS MK8 Ender 3 V2 Nozzles 0.4MM, 3D Printer Brass Hotend Nozzles with DIY Tools Storage Box for Creality Ender 3/Ender 3 Pro/Ender 3 Max/5 Pro/Ender 3 S1/Ender 3 Neo/CR 10 Series 3D Printer
Asin: B0B9LYZSKC
Strong Practicability - Storage Box For Easy Carrying And Storage Of Small Accessories.The Nozzle Cleaning Needle Is Made Of High-Quality Stainless Steel With Good Toughness And Is Not Easy To Break, And The Nozzle Can Be Cleaned From Multiple Angles.The Hexagon Wrench Makes The Adjustment Of The Nozzle Easier..
Wide Compatibility - Suitable For Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max/Ender 5 Pro/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo And Cr 10 Series 3D Printers.Compatible With All 1.75Mm Pla Abs Filament 3D Printers..
High Precision - Input Diameter 1.75Mm, Smooth Inner Wall, Extruder Nozzle Diameter Error Less Than 0.02 Mm.Greatly Reduces The Risk Of Print Head Leaks And Avoids Nozzle Clogging..
Package List - The 3D Printer Extruder Nozzles Come With 0.4 Mm Brass Nozzles*25, Nozzle Cleaning Needles*10, Hexagon Wrench*1, Stainless Steel Tweezers*1, And A Storage Box..
Features
- Premium Quality - 25 PCs high-quality brass nozzles, good abrasion resistance, heat resistance, and corrosion resistance.It is convenient for you to replace them in time to achieve high-quality printing.
- Package List - The 3D printer extruder nozzles come with 0.4 mm brass nozzles*25, nozzle cleaning needles*10, hexagon wrench*1, stainless steel tweezers*1, and a storage box.
- Strong Practicability - Storage box for easy carrying and storage of small accessories.The nozzle cleaning needle is made of high-quality stainless steel with good toughness and is not easy to break, and the nozzle can be cleaned from multiple angles.The hexagon wrench makes the adjustment of the nozzle easier.
- High Precision - Input diameter 1.75mm, smooth inner wall, extruder nozzle diameter error less than 0.02 mm.Greatly reduces the risk of print head leaks and avoids nozzle clogging.
- Wide Compatibility - Suitable for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 Max/Ender 5 Pro/Ender 3 S1/Ender 3 S1 Pro/Ender 3 Neo and CR 10 Series 3D printers.Compatible with all 1.75mm PLA ABS filament 3D printers.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #2
Creality Upgrade Ender 3 Extruder, Ender 3 V2 Upgrades Metal Extruder Aluminum MK8 Bowden Extruder 40 Teeth Drive Gear for Ender 3 Pro/Ender 5 Pro/Ender 5 Plus/CR-10 Series 3D Printer
Asin: B07WHYBVJ5 | Ean: 6973298330811
Work Better. It Makes Loading The Filament Easier And Smoother, No Worries About Filament Scraping Or Breaking..
Easy To Install. This Extruder Diy Kit Comes With An Instruction Of How To Put It Together, Which Makes It More Easy To Install..
Fits 1.75Mm Filament. 40 Teeth Drive Gear Compatible With Pla/Abs/Wood/Tpu/Pteg. Please Note: Some Printer Models Like Ender 3 And Edner 3 Pro, Their Original Extrusion Gears Cannot Be Removed, So These Model Printers Do Not Have To Change The Extrusion Screw. Ender 3V2，Its Extrusion Gear Can Be Replaced..
Last Over Years. Made By High Quality Aluminum, Last Much Longer Your Stock Plastic Or 3D Printed Extruder Feeder Drive..
Features
- Compatibility: This Upgraded 3d printer accessories is an original upgraded replacement part for Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Max, Ender 5, Ender 5 Plus, Ender 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR-10 S4, CR 10, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus, CR-X, CR 20, CR 20 Pro. It is also compatible with other 3D printers except the printers using a direct drive setup. No need to change stepper motors or other mounting hardware.
- Last Over Years. Made by high quality aluminum, last much longer your stock plastic or 3D printed extruder feeder drive.
- Work Better. It makes loading the filament easier and smoother, no worries about filament scraping or breaking.
- Fits 1.75mm filament. 40 Teeth drive gear compatible with PLA/ABS/Wood/TPU/PTEG. Please Note: Some printer models like Ender 3 and Edner 3 Pro, their original extrusion gears cannot be removed, so these model printers do not have to change the extrusion screw. Ender 3V2 its extrusion gear can be replaced.
- Easy to Install. This extruder DIY kit comes with an instruction of how to put it together, which makes it more easy to install.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
See On Amazon #3
Creality Official Ender 3 Extruder Upgrade Metal MK8 Bowden 3D Printer Parts for Ender-3 V2/Ender-3 Pro/Ender-3 Max CR-10/10S Gray Aluminum 1.75mm Filament 3D Printer Extruder Drive Feeder
Asin: B09LQKN5WG | Model: / | PartNumber: /
🎈【Improved Performance】The Optimized Extruder With Metal Extrusion And Original Hotend Kit Pushes The Filament Into The Printer Nozzle, Greatly Making The Metal Extruder Retain Power In Filament Feed-In. And The Beveled Filament Intake Can Prevent Scraping The Filament As It Is Pulled Into The Feeder..
🎈【After Sales Support】More Than 20 Engineers Provide 24/7 Customer Service With 12-Months Limited And Lifetime Technical Assistance. Please Kindly Contact Us(Seller) Via “Ask A Question” Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What Question..
🎈【Easy To Install】Diy Kit And You Need To Assemble By Yourself. The Full Necessary Screws & Parts Kit For The Extruder Is Included. Referring To Instructions Or Our 5Th Picture To Install, It Is Very Easy And Straightforward To Switch To This Upgraded Part On Your Machine..
🎈【Work Better】Our 3D Printer Extruder Kits Have An Adjustable Bolt So That You Can Adjust The Pressure Of The Extruder Gear As Needed. The Extruder Drive Has Better Stronger Pressure Pushing The Filament Into The Printer Nozzle And So Will Improve The Printer's Performance. 40 Teeth Drive Gear Feeds The 1.75Mm Filament, Compatible With Pla/Abs/Wood/Tpu/Pteg..
Features
- Quality Assurance 100% official all-metal 3D printer extruder. High quality aluminum alloy material and sandblast to surface oxidization, ensuring this gray extruder is last for long term use. Works better than original plastic stock extruder. Original Creality 3D printers accessories for Ender-3/Ender-3 Pro/Ender-3S/Ender-3 V2/Ender-3 Max/CR-10/CR-10S.
- Work Better Our 3d printer extruder kits have an adjustable bolt so that you can adjust the pressure of the extruder gear as needed. The extruder drive has better stronger pressure pushing the filament into the printer nozzle and so will improve the printer's performance. 40 Teeth drive gear feeds the 1.75mm filament, compatible with PLA/ABS/Wood/TPU/PTEG.
- Improved Performance The optimized extruder with metal extrusion and original hotend kit pushes the filament into the printer nozzle, greatly making the metal extruder retain power in filament feed-in. And the beveled filament intake can prevent scraping the filament as it is pulled into the feeder.
- Easy To Install DIY kit and you need to assemble by yourself. The full necessary screws & parts kit for the extruder is included. Referring to instructions or our 5th picture to install, it is very easy and straightforward to switch to this upgraded part on your machine.
- After Sales Support More than 20 engineers provide 24/7 customer service with 12-months limited and lifetime technical assistance. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 2.56 x 4.33 x 3.15 inches
See On Amazon #4
Creality Ender 3 /Pro/V2 3D Printer Assembled Extruder MK8 HotEnd Kit 24V with 0.4mm Nozzle Upgrade with Low Friction Creality-Capricorn Tubing
Asin: B07WNQP916 | Model: ENO-Ender3-Hotend-Bluetube | PartNumber: ENO-Ender3-Hotend-Bluetube | Ean: 0705300791497, 0198549003108 | UPC: 705300791497, 198549003108
Hotend Replacement Parts Suitable For Ender 3, Ender-3X, Ender-3 Pro, Ender 3 V2 3D Printer..
Creality-Capricorn Tube Is Far Superior To The White Ptfe Tubing Supplied With Most 3D Printers. Its Much Smoother To Feed Filament Through. And When Printing It Reduces The Drag On The Extruder Giving A Much Smoother Travel And Print Quality..
High Lubricity Additives Make Our Xs Series Tubing The Lowest Friction Bowden Tubing On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills. Lower Retraction Means Time Saved Every Time The Extruder Retracts. Over The Course Of A Print, A Few Milliseconds Here And A Few There Add Up To A Lot Of Time Saved..
Upgrade With Low Friction Creality-Capricorn Original Teflon Tube 40Cm..
Features
- It's 100% Creality Original and Creality-Capricorn PTFE Tubing.
- Upgrade with Low Friction Creality-Capricorn Original Teflon Tube 40CM.
- Hotend replacement parts suitable for ender 3, ender-3x, ender-3 pro, Ender 3 V2 3d printer.
- High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills. Lower retraction means time saved every time the extruder retracts. Over the course of a print, a few milliseconds here and a few there add up to a lot of time saved.
- Creality-Capricorn tube is far superior to the white PTFE tubing supplied with most 3D printers. Its much smoother to feed filament through. And when printing it reduces the drag on the extruder giving a much smoother travel and print quality.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon #5
Creality 3D Official Printer Ender 3 Dual Z-axis Upgrade Kit with Lead Screw, Metal Power Supply Holder and Stepper Motor, 3D Printer Ugrades Kit for Ender 3, Ender 3 Pro, Ender 3 V2
Asin: B09N8QQDSP | Model: CREALITYENDER3DUALZ | PartNumber: CREALITYENDER3DUALZ
【Smooth Running】 Upgrade Single Z-Axis Structure To A Dual Z-Axis Structure, Will Make The Printer More Easy To Leveling, Both Ends Of The X Axis Are Raised And Lowered Synchronously, Which Reduces Difficulty And Frequency Of Bed Leveling Obviously..
【After Sales Service】Creality 3D Pay Great Attention To The Buyer’S User Experience. If You Have Unsolvable Problems During Installation And Use, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
【High Comparable】The Dual Z Axis Upgrade Kit Is Compatible With Ender 3/ Ender 3 Pro/ Ender 3 V2/Ender 3 Neo/Ender 3 V2 Neo 3D Printer. Easily Improve 3D Printers With Low Cost Efficiency To Dual Z Axis Mode..
【Stable Performance】 Compared With Closed Timing Belt, This 3D Printer Parts Set Still Retains The Design Of Stepper Motor To Ensure Screw Rod Smooth Operation..
Features
- Increased Accuracy Compared with original structure, dual Z-axis kit reduces the layer ripple caused by Z-axis vibration, avoiding backlog of filament thoroughly, which improves stability of 3D printing and increases the printing performance of 3D printer.
- Stable Performance Compared with Closed Timing Belt, this 3D printer parts set still retains the design of stepper motor to ensure screw rod smooth operation.
- Smooth Running Upgrade Single Z-axis structure to a dual Z-axis structure, will make the printer more easy to Leveling, both ends of the X axis are raised and lowered synchronously, which reduces difficulty and frequency of bed leveling obviously.
- High Comparable The dual z axis upgrade kit is compatible with Ender 3/ Ender 3 Pro/ Ender 3 V2/Ender 3 Neo/Ender 3 V2 Neo 3D printer. Easily improve 3D printers with low cost efficiency to Dual Z axis mode.
- After Sales Service Creality 3D pay great attention to the buyer s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
Dimensions: 2.56 x 3.94 x 15.55 inches | Weight: 2.01 Pounds
See On Amazon #6
Creality Upgrade Ender 3 Hotend, Assembled Extruder with Capricorn Bowden PTFE Tubing for Creality Ender 3 Pro/Ender 3 V2 with Silicone Cover 3, 0.4mm Ender 3 Nozzle 3 and 2 Pair Pneumatic Couplers
Asin: B082PGCF2B | Model: ENDER3-PT | PartNumber: ENDER3-PT
Pluggable: The Heating Tube And Temperature Thermistor That From Control Box, Connect Them With Terminal Housing And Pin. Then You Could Plug The Hotend Kit, Easier To Replace Hotend Kit..
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Braided Wire Was Heating Tube 24V40w..
With More Terminal Housing And Pins As Spare Parts, In Case Fail Installation And Waste..
Original Capricorn Xs Serious Bowden Ptfe Tubing With Lowest Friction On The Market. Less Friction Means More Responsiveness, Less Retraction, More Accurate Prints, Less Slippage, Wear, And Tear On The Extruder, And Less Clogging When Printing Chunky Filaments Such As Some Woodfills Or Ironfills..
Features
- It's 100% Creality Original Upgrade Assembled Extruder Hotend.
- Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
- Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
- With more terminal housing and pins as spare parts, in case fail installation and waste.
- MK8 Extruder Hot End kit, white wire was temperature thermistor, braided wire was heating tube 24V40W.
- See more on Amazon...
Brand: Comgrow | Manufacturer: Creality 3D
Weight: 0.30 pounds
See On Amazon #7
Official Creality Ender 3 Direct Drive Extruder Kit, Comes with 42-40 Stepper Motor Hotend Kit, Support Flexible TPU Filament, BL Touch, Compatible with Ender 3 Pro/Ender 3 V2
Asin: B08J7N2LNL | Model: US4-ENDER3JINDUANJICHU-FBA | PartNumber: US4-ENDER3JINDUANJICHU-FBA
Direct Extruding Smooth Feed-In - Lower Torque Requirements On The Stepper Motor, Reducing The Possibility Of The Nozzle Blockage When Retracting Filament And Malfunction When Loading New Filament. There Is More Even Feed-In With Direct Extruding Than Bowden Tube Extruding..
Printing At High - Temperature, Strong Compatibility: Compatible With More Types Of Filament Like Pla Filament, Petg Filament And Tpu Filemnt. When Printing Flexible Tpu Under High Temperature, It Can Optimize Tpu Printing Performance..
Integrated All Metal Hotend - It's Sturdy And Wear-Resistant With An All-Metal Shell And Surface Oxidation Treatment; An Integrated Structure Is Convenient For Wiring And Replacing..
Easy To Install And Use - Switch Bowden Extrusion To Direct Extruder At Any Time And Easy To Disassembly. It Doesn't Affect The Inherent Function Of The Printer Because It's A Complete Extrusion Kit. With Longer Extruder Motor Connecting Cable, Tools, Accessories, And Wiring Diagram Instruction For Installation, Easy To Assemble..
Features
- Compatibility with - Creality Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer.
- Easy to Install and Use - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a complete extrusion kit. With longer Extruder motor connecting cable, tools, accessories, and wiring diagram instruction for installation, easy to assemble.
- Direct Extruding Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament. there is more even feed-in with direct extruding than Bowden tube extruding.
- Integrated All Metal Hotend - It's sturdy and wear-resistant with an all-metal shell and surface oxidation treatment; an Integrated structure is convenient for wiring and replacing.
- Printing at High - Temperature, Strong Compatibility: Compatible with more types of filament like PLA filament, PETG filament and TPU filemnt. When printing flexible TPU under high temperature, it can optimize TPU printing performance.
- See more on Amazon...
Brand: Wolias | Manufacturer: Creality 3D
Weight: 0.80 pounds
See On Amazon #8
Ender 3 Hotend, Authentic Creality Assembled Hotend Kit 3D Printer Parts with 5X 0.4mm Nozzles for Ender 3 Ender 3 V2 and Ender 3 Pro
Asin: B082XXRT78 | Model: Sprinkler Kit -01 | PartNumber: Sprinkler Kit -01 | Ean: 8711459631234
Mk8 Extruder Hot End Kit, White Wire Was Temperature Thermistor, Braided Wire Was Heating Tube 24V 40W. Tip Of The Nozzle, Aluminum Heating Block, Throat Pipe (Built-In Teflon)..
Silicone Cover Is Provided To Help Keep Temperatures On The Hotend Much More Stable And This Will Result In Higher Print Quality And Consistency..
Five 0.4Mm Brass Nozzle Are Included In This Hotend Kit. This Kit Can Work With Different Sizes Of Mk8 Nozzle: 0.2Mm/0.3Mm/0.4Mm/0.5Mm /0.6Mm/0.8Mm/1.0Mm..
Pluggable: The Heating Tube And Temperature Thermistor That From Control Box, Connect Them With Terminal Housing And Pin. Then You Could Plug The Hotend Kit, Easier To Replace Hotend Kit..
Features
- Compatibility: 100% Creality Original. This assembled hotend kit from Creality is a plug and play replacement for Ender 3/ Ender 3 V2 /Ender 3 Pro/ Ender 3S.
- Pluggable: the heating tube and temperature thermistor that from control box, connect them with terminal housing and pin. Then you could plug the hotend kit, easier to replace hotend kit.
- MK8 extruder hot end kit, white wire was temperature thermistor, braided wire was heating tube 24V 40W. Tip of the nozzle, aluminum heating block, throat pipe (built-in teflon).
- Five 0.4mm brass nozzle are included in this hotend kit. This kit can work with different sizes of MK8 nozzle: 0.2mm/0.3mm/0.4mm/0.5mm /0.6mm/0.8mm/1.0mm.
- Silicone Cover is provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and consistency.
- See more on Amazon...
Brand: ORTHLAND | Manufacturer: Orthland
See On Amazon #9
Official Creality 3D Printer Ender 3 0.4mm 5PCS Brass Hotend Nozzles for Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5 Series and CR 10 Series
Asin: B09W2J7P5X | Model: CR-NOZZLES-0.4MM | PartNumber: CR-NOZZLES-0.4MM
【Applicability And Compatibility】Mk8 Extruder Nozzles Fit For 3D Printers Like Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5 Series/Cr 10 Series, Compatible With All 1.75Mm Pla Abs 3D Printers. Fit Exactly Like The Original..
【After Sales Service】We Pay Great Attention To The Buyer’S User Experience. If You Have Unsolvable Problems During Installation And Use, Please Feel Free To Contact Us, Our After-Sales Technical Team Will Provide You With Detailed Solutions Within 24 Hours..
【Package Include】Printer Nozzles Come With 5 Pieces Of Mk8 Nozzles In 0.4Mm.
【Precise Design】3D Printer Nozzles Can Prevent The Print Head Leakage Effectively And Produce Consistent Prints With Smooth And Glossy Polish. Reduce The Resistance From The Corners And Avoid Blocking The Filament With A Rounded Chamfer. Easy To Identify With Engraving The Size On Each Nozzle..
Features
- Quality Assurance MK8 nozzles are made of high-quality brass material. Heavy duty and provide a long service life. Easy to install and change.
- Precise Design 3d printer nozzles can prevent the print head leakage effectively and produce consistent prints with smooth and glossy polish. Reduce the resistance from the corners and avoid blocking the filament with a rounded chamfer. Easy to identify with engraving the size on each nozzle.
- Applicability and Compatibility MK8 extruder nozzles fit for 3D Printers like Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5 Series/CR 10 Series, compatible with all 1.75mm PLA ABS 3D printers. Fit exactly like the original.
- Package Include Printer nozzles come with 5 pieces of MK8 nozzles in 0.4mm
- After Sales Service We pay great attention to the buyer s user experience. If you have unsolvable problems during installation and use, please feel free to contact us, our after-sales technical team will provide you with detailed solutions within 24 hours.
- See more on Amazon...
Brand: Creality
See On Amazon #10
Creality Original 3D Printer NTC100K Thermistor Temp Sensor 5 Pack Quick Replacement Single Ended Glass Sealed for Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 5/Ender 5 Pro 3D Printer(30cm/11.8inch)
Asin: B0BJJQGC17 | Model: 3D-Thermistor-5P | PartNumber: 3D-Thermistor-5P
🌡【Single-Ended Glass Sealed】The Glass Material Used In The Package Ensures The Maximum Service Life With Precision Temperature Measurement, Resistance To High Temperatures, And Fast Temperature Conduction..
🌡【Official Creality 3D Store】Official Creality 3D Store! We Provide Professional After-Sales Support. Please Kindly Contact Us(Seller) Via “Ask A Question” Find Us Directly Cause Our Customer Service Will Respond To You Within 24 Hours No Matter What The Question..
🌡【Easy To Install】Only 4 Steps To Install, No Need To Disassemble The Motherboard And Wire Harness, Fast Wiring Just Replace The Thermistor Directly. There Is A Tin Ring Inside, Waterproof Hot Melt Glue, No Welding, Sealing And Waterproof, Anti-Leakage, High-Temperature Resistance..
🌡【The Temperature Measurement】 -30 °C ~ +300 °C, Can Replace The Original Creality 3D Printer Nct Thermistor. Fit For Printing High-Temperature Filament..
Features
- Upgrade NTC Thermistor 100% Official Creality 3D Printer thermistor used for hotbed or hotend. Single-ended glass sealed temperature measurement. Compatible with Ender 3 series, Ender 5 series, Ender-6, and part of CR 10 series.
- The Temperature Measurement -30 C ~ +300 C, can replace the original Creality 3D Printer NCT thermistor. Fit for printing high-temperature filament.
- Single-ended Glass Sealed The glass material used in the package ensures the maximum service life with precision temperature measurement, resistance to high temperatures, and fast temperature conduction.
- Easy to Install Only 4 steps to install, no need to disassemble the motherboard and wire harness, fast wiring just replace the thermistor directly. There is a tin ring inside, waterproof hot melt glue, no welding, sealing and waterproof, anti-leakage, high-temperature resistance.
- Official Creality 3D Store Official Creality 3D Store! We provide professional after-sales support. Please kindly contact us(seller) via ask a question find us directly cause our customer service will respond to you within 24 hours no matter what the question.
- See more on Amazon...
Brand: Creality | Manufacturer: Creality 3D
See On Amazon
Looking For Something Else?
Search