CDHPOWER LD100 Replacement of Top End Cylinder Set and Bottom End Crank Set w/2pcs Spark Plug and Two Head CDI/Upgraded 2 Stroke YD100
Asin: B0BZRLVCPR
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.Cylinder Inner Diameter 50Mm; Piston Outside Diameter 50Mm; 8Mm Front And Rear Mount Studs; 40Mm Alum Intake Stud Spacing.
Cdi Wth Two Head-Upgraded Cdi.
2Pcs High Performance 3 Prong Spark Plug M4×1.25, Z4jc.
Excluding Manual; 50Mm Bore; Improved Magneto As Well; Use The Cdi With 2 Head.
Features
- Bore and Stroke: 50mm x 40mm; Better adjusting clutch a little before riding
- Excluding manual; 50mm bore; Improved magneto as well; Use the CDI with 2 head
- Cylinder inner diameter 50mm; Piston outside diameter 50mm; 8mm front and rear mount studs; 40mm alum intake stud spacing
- 2PCS High performance 3 Prong Spark Plug M4 1.25, Z4JC
- CDI wth Two Head-Upgraded CDI
- See more on Amazon...
Brand: CDHPOWER
See On Amazon Similar To CDHPOWER LD100 Replacement of Top
#1
CDHPOWER New Performance Head for 2 Stroke 66cc/80cc
Asin: B06Y64K3GL | Model: CDH-JJ | PartNumber: CDH-JJ | Ean: 0747100305801 | UPC: 747100305801
The Casting Cylinder Head Increases The Horse Power Of Your 80Cc / 66Cc 2-Stroke Bicycle Engine And This Greatly Cools Off The Engine. Would Result Better Performance And Longer Life.
Height Max:51Mm-52Mm; Width From 115Mm To 123.5Mm; Any Questions,Please Contact Us Firstly !We Can Help You Solve The Problem Until You Are Satisfied..
Compatible With Spark Plugs As Folllowing(Check The Fourth Picture):Accel0453,Ac Delco-R44f,Autolite 4123/425/275/4093/Xs4093,Beru-14R-7Bu,Bosch-Wr6bc+/Wr7bc Ngk-B6hs/B7hs/Bp7hs/Bpr6h Etc.
Fully Casting Made; Alum Design,Not For 48Cc/50Cc.
Features
- Higher performance Casting head for 2 stroke 80cc/66cc; Clean off all the casting sand and sand the gasket surface
- Fully casting made; Alum Design,Not for 48cc/50cc
- The casting cylinder head increases the horse power of your 80cc / 66cc 2-Stroke Bicycle Engine and this greatly cools off the engine. Would result better performance and longer life
- Compatible with spark plugs as folllowing(check the fourth picture):Accel0453,AC Delco-R44F,Autolite 4123/425/275/4093/XS4093,Beru-14R-7BU,Bosch-WR6BC+/WR7BC NGK-B6HS/B7HS/BP7HS/BPR6H etc
- Height Max:51mm-52mm; Width from 115mm to 123.5mm; Any questions,please contact us firstly !we can help you solve the problem until you are satisfied.
- See more on Amazon...
Brand: CDHPOWER | Manufacturer: cdhpower
See On Amazon #2
CDHPOWER Wide Crank Arm w/ 44T Sprocket - Gas Motorized Bicycle
Asin: B0CHMJPM7G | Ean: 0725764211232 | UPC: 725764211232
Crank Arm Length: 165Mm; The Length Of The Pedal Crank Shaft Is About 266Mm; Chrome Wide Crank W/ 44T Sprocket.
Wide Cranks Are Required For 2 Stroke And 4-Stroke Or Pull Start Bicycle Engine Kits..
This Part Allows You To Convert A 1 Piece Crank Into A 3 Piece Crank..
Be Used On 26" Cruiser Style Frame; Compatible With 9/16 Inch Pedals. Sprocket Fit For 410 Chain.
Features
- If your bike is 2" cup of bottom bracket, pls use a bottom bracket converter (we do not offer this converter, need you to buy it from your local shop), compatible with BB 44mm
- Be used on 26 cruiser style frame; Compatible with 9/16 inch pedals. Sprocket Fit for 410 chain
- Crank Arm Length: 165mm; The Length of the pedal crank shaft is about 266mm; Chrome Wide Crank w/ 44T Sprocket
- This part allows you to convert a 1 piece crank into a 3 piece crank.
- Wide cranks are required for 2 stroke and 4-stroke or pull start bicycle engine kits.
- See more on Amazon...
Brand: CDHPOWER | Manufacturer: CDHPOWER
See On Amazon #3
CDHPOWER LD100 Replacement of Top End Cylinder Set and Bottom End Crank Set/Upgraded 2 Stroke YD100
Asin: B06Y62CBXS | Model: CDH-BB | PartNumber: CDH-BB | Ean: 0747100305719 | UPC: 747100305719
Bore And Stroke: 50Mm X 40Mm; Better Adjusting Clutch A Little Before Riding.
Cylinder Inner Diameter 50Mm; Piston Outside Diameter 50Mm; 8Mm Front And Rear Mount Studs; 40Mm Alum Intake Stud Spacing.
Excluding Manual; 50Mm Bore; Improved Magneto As Well; Use The Cdi With 2 Head.
Cdhpower Ld100 Motor Replaement Top End Cylinder Set And Bottom End Crank Set For 2 Stroke Yd100/Ld100；Cylinder And Head Are Separate.
Features
- It comes as first pictured;LD100 MOTOR REPLACEMENT PARTS ONLY. piston kit is installed well inside of cylinder already
- CDHPOWER LD100 Motor Replaement Top End Cylinder Set and Bottom End Crank Set for 2 stroke YD100/LD100 Cylinder and head are separate
- Bore and Stroke: 50mm x 40mm; Better adjusting clutch a little before riding
- Excluding manual; 50mm bore; Improved magneto as well; Use the CDI with 2 head
- Cylinder inner diameter 50mm; Piston outside diameter 50mm; 8mm front and rear mount studs; 40mm alum intake stud spacing
- See more on Amazon...
Brand: CDHPOWER | Manufacturer: cdhpower
Weight: 12.35 pounds
See On Amazon #4
CDHPOWER LD100 Cylinder Head, Higher Performance Racing Head for 2 Stroke LD100-100cc/YD85
Asin: B0CHJ4R3D9 | Ean: 0725764211164 | UPC: 725764211164
The Racing Cylinder Head Increases The Horse Power And This Greatly Cools Off The Ld100 2-Stroke Cylinder. Would Result Better Performance And Longer Life For The 2 Stroke Ld100/79Cc/80Cc..
6Cc.
Fully Cnc Machine Made; Alum Design.
Features
- Higher performance Racing head for 2 stroke kit LD100 100cc
- Fully CNC machine made; Alum Design
- The racing cylinder head increases the horse power and this greatly cools off the LD100 2-Stroke cylinder. Would result better performance and longer life for the 2 Stroke LD100/79cc/80cc.
- 6cc
- See more on Amazon...
Brand: CDHPOWER | Manufacturer: CDHPOWER
See On Amazon #5
CDHPOWER Motor Mount Rubber Gaskets for Gas Motorized Bicycle 66cc/80cc/yd100
Asin: B01MS3OLIB | Ean: 0764560642130 | UPC: 764560642130
Kindly Reminding: Pls Recheck Your Engine Front Mount Mouth Before Buy,Ensure It Is 40Mm Mouth.
Package: Including 1 Gasket To Front Mount, And 1 Gasket To Rear Mount.
For 66Cc/80Cc/Yd100.
Compatible With Front Mount Mouth 40Mm(Refer To The Third Picture With Sizes In Detail)..
Features
- Motor Mount Gaskets including front and rear one
- Compatible with front mount mouth 40mm(refer to the third picture with sizes in detail).
- KINDLY REMINDING: pls recheck your engine front mount mouth before buy,ensure it is 40mm mouth
- For 66cc/80cc/yd100
- Package: including 1 gasket to front mount, and 1 gasket to rear mount
- See more on Amazon...
Brand: CDHPOWER | Manufacturer: CDHPOWER
See On Amazon #6
CDHPOWER CDH50MM YD100/LD100 Piston Kit 50mmx40mm
Asin: B06Y64N5VC | Model: CDH-BB | PartNumber: CDH-BB | Ean: 0747100305726 | UPC: 747100305726
Out Diameter Of Yd100/Ld100 Piston:50Mm; 49Mm The Total Height Of The Piston From Top Of The Dome To The Bottom Edge,Width Of The Ring Is 2Mm.
The Real Yd100/Ld100 Piston 10Mm Diameter Of The Hole; The Ring Is 2Mm; The Diameter Of The Pin Is 10Mm; Details Please Reference Picture..
Good Replacement For All Types 2 Stroke Yd100/Ld100;.
Yd100/Ld100 Piston Kit Inlcuding 1 Piston 50Mm, 2 Piston Rings,1 Piston Pin And 2 Clips For Your New Cylinder Build Or As Replacements..
Features
- CDHPOWER CDH50mm YD100/LD100 Piston Kit 50mm,
- Yd100/LD100 Piston Kit inlcuding 1 piston 50mm, 2 piston rings,1 piston pin and 2 clips for your new cylinder build or as replacements.
- Out Diameter of Yd100/LD100 piston:50mm; 49mm the total height of the piston from top of the dome to the bottom edge,Width of the ring is 2mm
- Good replacement for all types 2 stroke YD100/LD100;
- The real YD100/LD100 piston 10mm diameter of the hole; the ring is 2mm; the diameter of the pin is 10mm; Details please reference picture.
- See more on Amazon...
Brand: CDHPOWER | Manufacturer: cdhpower
See On Amazon #7
CDHPOWER Imporved Silver CNC Universal Motor Mount-Suit for 3.4L Felt Faker Gas Frame - Gas Motorized Bicycle 48cc/66cc/80cc
Asin: B01N9OP3F3 | Model: cdhpower | PartNumber: cdhpower | Ean: 0764560642505 | UPC: 764560642505
Suitable For Cdh Yd100 Engine And Cdh Pk80 Engine;Suitable For Cdh 3.4L Felt Faker Gas Frame.
Works On Most Newer Bicycles And Allows You To Mount The Motor Without Drilling Through The Frame..
For 66Cc/80Cc And 48Cc 2-Stroke Bicycle Engines Universal Mount For Bike Motors This Universal Mount Helps Mounts Your Bike Motor To Bigger Down Tubes.
Suitable For Front Mount With Bolt 6Mm And 8Mm (2 In 1);.
Features
- Inner Diameter: 1.65" (42.5mm);Compatible with all brand 2 stroke motors no matter how wide or small the front mount it is 1pcs screw M8X30mm 2pcs screw M6X30mm
- Suitable for front mount with bolt 6mm and 8mm (2 in 1);
- Suitable for CDH YD100 Engine and CDH PK80 Engine;Suitable for CDH 3.4L felt faker Gas Frame
- For 66cc/80cc and 48cc 2-stroke bicycle engines Universal Mount for Bike Motors This universal mount helps mounts your bike motor to bigger down tubes
- Works on most newer bicycles and allows you to mount the motor without drilling through the frame.
- See more on Amazon...
Brand: CDHPOWER | Manufacturer: cdhpower
See On Amazon #8
CDHPOWER Black PK80 New Cylinder Body 40mm Intake - 2 Stroke 80cc Motorized Bicycle Cylinder
Asin: B0BJJ73QVB | Ean: 0725889968912 | UPC: 725889968912
40Mm Intake Manifold Stud Spacing;.
New Design On Outlet To Muffler And Air Intake To Manifold Intake;.
Cylinder Body Gaskets Are Not Included;.
New Design Inside, Please Refer To Pictures Listed. Inside Wall Of Cylinder: Electroplated.
Features
- Black New Cylinder Body will replace the cylinder body of 2 stroke 66cc/80cc motorized bike engine kits, NOT compatible with 48cc 2 stroke kit;
- New Design inside, please refer to pictures listed. Inside wall of cylinder: Electroplated
- 40mm Intake Manifold Stud Spacing;
- Cylinder body Gaskets are not included;
- New Design on outlet to muffler and air intake to manifold intake;
- See more on Amazon...
Brand: CDHPOWER | Manufacturer: CDHPOWER
See On Amazon #9
DONSP1986 CDH110-52mm Iron Sleeve Cylinder Gas Motorized Bicycle Gas Engine Cylinder 2 Stroke 110cc Gas Motor Cylinder for 84cc/85cc Gas Motorized Bicycle
Asin: B09FD4GJG7 | Model: ntn-15 | PartNumber: ntn-15 | Ean: 0725889440364 | UPC: 725889440364
40Mm Intake Manifold Stud Spacing; Cylinder Body Gaskets Are Included;.
Any Questions,Please Contact Us Firstly! We Can Help You Solve The Problem Until You Are Satisfied..
Compatible With Cdh110 Piston Kit And Cdh110 Bottom End Only;Good Replacement For Cdh110 Motor Kit.
New Design; Inner Diameter Of Cylinder(Bore):52Mm; Inside Wall Of Cylinder: Electroplated;Bolts Stud Spacing: 52Mm; Opposite Stud Spacing: 70Mm.
Features
- CDH110 Iron Sleeve Cylinder 52mm for CDH110 gas engine kit only;
- New Design; Inner diameter of cylinder(bore):52mm; Inside wall of cylinder: Electroplated;Bolts stud spacing: 52mm; Opposite stud spacing: 70mm
- 40mm Intake Manifold Stud Spacing; Cylinder body Gaskets are included;
- Compatible with CDH110 piston kit and CDH110 Bottom End ONLY;Good Replacement for CDH110 motor kit
- Any questions,please contact us firstly! We can help you solve the problem until you are satisfied.
- See more on Amazon...
Brand: DONSP1986 | Manufacturer: DONSP1986
See On Amazon #10
CDHPOWER Gas Frame Tank Cap of Bike Gas Frame/Tank Frame - Gas Motorized Bicycle 66cc/80cc
Asin: B06Y6722RY | Model: CDH-EE | PartNumber: CDH-EE | Ean: 0747100305764 | UPC: 747100305764
Any Questions,Please Contact Us Firstly !We Can Help You Solve The Problem Until You Are Satisfied..
The Cap Is Compatible Only For Cdhpower Gas Frame W/2.4L 3.4L And 3.75L Gas Tank Only.
Features
- Package include: 1*CDHpower gas tank frame cap
- The cap is compatible ONLY for CDHPOWER GAS FRAME W/2.4L 3.4L and 3.75L GAS TANK ONLY
- Any questions,please contact us firstly !we can help you solve the problem until you are satisfied.
- See more on Amazon...
Brand: CDHPOWER | Manufacturer: cdhpower
See On Amazon #11
CDHPOWER Wide Crank Assembly- 3pcs -44T- Gas Motorized Bicycle
Asin: B06Y6457BD | Ean: 0747100305702 | UPC: 747100305702
Wide Cranks Are Required For 4-Stroke Or Pull Start Bicycle Engine Kits. The Distance Between The Pedal Crank Arms Is About 26.6Cm.
Any Questions,Please Contact Us Firstly! We Can Help You Solve The Problem Until You Are Satisfied..
If Your Bike Is 2" Cup, Pls Use A Bottom Bracket Converter.
Chrome Wide Crank W/ 44T Sprocket, Works With 415 Chain. This Part Allows You To Convert A 1 Piece Crank Into A 3 Piece Crank.
Features
- Compatible with 9/16 inch pedals. Will not be compatible with Micargi Beach Cruiser's stock pedals
- Chrome Wide Crank w/ 44T Sprocket, works with 415 chain. This part allows you to convert a 1 piece crank into a 3 piece crank
- Wide cranks are required for 4-stroke or pull start bicycle engine kits. The distance between the pedal crank arms is about 26.6cm
- If your bike is 2 cup, pls use a bottom bracket converter
- Any questions,please contact us firstly! we can help you solve the problem until you are satisfied.
- See more on Amazon...
Brand: CDHPOWER | Manufacturer: cdhpower
See On Amazon #12
CDHPOWER Higher Performance Spark Plug for 2-Stroke Engine For 66cc/80cc Gas Motorized Bicycle
Asin: B06XDZVQLY | Model: CDHBC | PartNumber: CDHBC | Ean: 0764560642246 | UPC: 764560642246
Any Questions,Please Contact Us Firstly! We Can Help You Solve The Problem Until You Are Satisfied..
Features
- Package Including 1pc higher performance Spark Plug for 2-Stroke Engine 80CC Gas Motorized Bicycle
- Any questions,please contact us firstly! we can help you solve the problem until you are satisfied.
- See more on Amazon...
Brand: CDHPOWER | Manufacturer: cdhpower
See On Amazon #13
CDHPOWER YD85CC Replacement of Top End Cylinder Set and Bottom End Crank Set for 2 Stroke 85CC
Asin: B0D2PTLZHX | Ean: 0725764211829 | UPC: 725764211829
Bore And Stroke: 52Mm X 40Mm; Better Adjusting Clutch A Little Before Riding.
Cylinder Inner Diameter 52Mm; Piston Outside Diameter 52Mm; 8Mm Front And Rear Mount Studs; 40Mm Alum Intake Stud Spacing; 52Mm Muffler Stud Spacing.
Excluding Manual; 52Mm Bore; Improved Magneto As Well.
Cdhpower Yd85cc Motor Replaement Top End Cylinder Set And Bottom End Crank Set For 2 Stroke Yd85cc；.
Features
- It comes as first pictured;YD85CC MOTOR REPLACEMENT PARTS ONLY. piston kit is installed well inside of cylinder already
- CDHPOWER YD85cc Motor Replaement Top End Cylinder Set and Bottom End Crank Set for 2 stroke YD85CC
- Bore and Stroke: 52mm x 40mm; Better adjusting clutch a little before riding
- Excluding manual; 52mm bore; Improved magneto as well
- Cylinder inner diameter 52mm; Piston outside diameter 52mm; 8mm front and rear mount studs; 40mm alum intake stud spacing; 52mm muffler stud spacing
- See more on Amazon...
Brand: CDHPOWER | Manufacturer: cdhpower
See On Amazon #14
CDHPOWER YD100/LD100 Bottom End Crank Assembly
Asin: B085RQ18C9 | Model: cdhpower-2020-2 | PartNumber: cdhpower-2020-2 | Ean: 0761895362726 | UPC: 761895362726
Replacment For Yd100/Ld100; M8 Studs For Front And Rear Mount,Wide Front Mount Crank Installed Well Inside Of Bottom.
Dose Not Compatible With 2 Stroke Kit 66Cc/80Cc.
It Is Complete Bottom End Crank Assembly Of Yd100/ Ld100, Easy To Install..
Fit The 14Mm Needle Beaing And 10Mm Piston Pin;Studs/Bolts Required: M8x1.25 For Yd100 Only; Excliuding Cylinder Body Gasket And Bolts/Studs To Fasten The Cylinder..
Features
- CDHPOWER YD100 Bottom End Crank Assembly with improved magneto; be aware that the cylinder head to yd100 is different size and piston to yd100 is bigger than standard 80cc
- Fit the 14mm needle beaing and 10mm Piston Pin;Studs/Bolts required: M8x1.25 For YD100 only; EXCLIUDING cylinder body gasket and Bolts/Studs to fasten the cylinder.
- Replacment for YD100/LD100; m8 studs for front and rear mount,wide front mount Crank installed well inside of bottom
- It is Complete bottom end crank assembly of YD100/ LD100, easy to install.
- Dose not compatible with 2 stroke kit 66cc/80cc
- See more on Amazon...
Brand: CDHPOWER | Manufacturer: cdhpower
See On Amazon #15
CDHPOWER PK80 Cylinder Head Two Holes, LD80/LD90 Motor Head for PK80/LD80/LD90-80cc/66cc Gas Motorized Bicycle
Asin: B0CHJ1QX84 | Model: LD900 racing head | PartNumber: LD900 racing head | Ean: 0725764211324 | UPC: 725764211324
Excluding Two Head Plug Cdi Box.
If You Are Not Satisfied With The Product, Please Feel Free To Contact Us, We Will Try Our Best To Solve Your Problem..
Head Gasket Is Included,New Design Two Holes To Spark Plug.
Features
- CDHPOWER NEW Cylinder Head is compatible with all brand 2 stroke gas motor kit such as PK80/LD80/LD90 and other brand 2 stroke gas motor
- Head gasket is included,new design two holes to spark plug
- Excluding two head plug cdi box
- If you are not satisfied with the product, please feel free to contact us, we will try our best to solve your problem.
- See more on Amazon...
Brand: CDHPOWER | Manufacturer: CDHPOWER
See On Amazon #16
CDHPOWER Bottom End Crank Assembly of pk80/LD80/LD90
Asin: B085RCPMS6 | Model: cdhpower-2020-1 | PartNumber: cdhpower-2020-1 | Ean: 0761895362719 | UPC: 761895362719
Replacment For 66Cc/80Cc; M8 Studs For Front And Rear Mount,Wide Front Mount.
It Is Complete Bottom End Crank Assembly, Easy To Install..
Crank Installed Well Inside Of Bottom.
Studs/Bolts Required: M8x1.25 For All Kinds Brand 66Cc 80Cc 2 Stroke;.
Features
- CDHPOWER PK80/LD80/LD90 Bottom End Crank Assembly of 66cc/80cc
- Studs/Bolts required: M8x1.25 For all kinds brand 66cc 80cc 2 stroke;
- Replacment for 66cc/80cc; m8 studs for front and rear mount,wide front mount
- Crank installed well inside of bottom
- It is Complete bottom end crank assembly, easy to install.
- See more on Amazon...
Brand: CDHPOWER | Manufacturer: cdhpower
See On Amazon #17
CDHPOWER PK80 Motor Replacement of Top End Cylinder Set and Bottom End Crank Set for 2 Stroke 66cc/80cc
Asin: B076BCG9GV | Ean: 0606321921019 | UPC: 606321921019
High Hole Piston And Long Connecting Rod;Wide Front Mount; 8Mm Bolts To Front And Rear Bolts;.
Clear Up The Cylinder Transfer Ports Before Assembling Maybe Some Rough Slag Inside Which Maybe Break Off And Cause The Jamming Of Pistons And Cylinders;Fully Attention On Screwing Cylinder To The End Bottom,Do Not Screw M8 Bolts Tightly That Maybe Cause Drill Through The End Bottom So Add Some Gasket Or Washer On Head Is Better Way To Prevent It Happen; Attention On Piston Ring If Put The Piston Out Of Cylinder, The Piston Rings Are Weak, Better With Right Way Install Piston Kit To Cylinder.
Slant Head; 40Mm Alum Intake Stud Spacing; Manual Excluded.
Bore And Stroke 47Mmx40mm; Better Adjusting Clutch A Little Before Riding.
Features
- It comes as first pictured; PK80 MOTOR REPLACEMENT PARTS ONLY. piston kit is installed well inside of cylinder already
- Bore and Stroke 47mmx40mm; better adjusting Clutch a little before riding
- High hole Piston and Long connecting rod;Wide front mount; 8mm bolts to front and rear bolts;
- Slant head; 40mm alum intake stud spacing; manual EXCLUDED
- Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders;fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen; Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder
- See more on Amazon...
Brand: CDHPOWER | Manufacturer: cdhpower
See On Amazon #18
CDHPOWER LD90 Replacement of Top End Cylinder Set and Bottom End Crank Set w/ 2 Head CDI/Upgraded 2 Stroke PK80
Asin: B0C7VQCDCL | Ean: 0725764431173 | UPC: 725764431173
Bore And Stroke: 48Mm X 40Mm; Better Adjusting Clutch A Little Before Riding.
Cylinder Inner Diameter 48Mm; Piston Outside Diameter 48Mm; 8Mm Front And Rear Mount Studs; 40Mm Alum Intake Stud Spacing.
Excluding Manual; 48Mm Bore; Improved Magneto As Well; With The 2 Head Cdi.
Cdhpower Ld90 Motor Replaement Top End Cylinder Set And Bottom End Crank Set For 2 Stroke ；Cylinder And Head Are Separate.
Features
- It comes as first pictured;LD90 MOTOR REPLACEMENT PARTS ONLY. piston kit is installed well inside of cylinder already
- CDHPOWER LD90 Motor Replaement Top End Cylinder Set and Bottom End Crank Set for 2 stroke Cylinder and head are separate
- Bore and Stroke: 48mm x 40mm; Better adjusting clutch a little before riding
- Excluding manual; 48mm bore; Improved magneto as well; with the 2 head CDI
- Cylinder inner diameter 48mm; Piston outside diameter 48mm; 8mm front and rear mount studs; 40mm alum intake stud spacing
- See more on Amazon...
Brand: CDHPOWER | Manufacturer: cdhpower
See On Amazon #19
JZSPORTS CDHPOWER LD100 Higher Performance Racing Head for 2 Stroke LD100/YD100-100cc
Asin: B0BVFF8Q8C | Ean: 0725889437562 | UPC: 725889437562
The Racing Cylinder Head Increases The Horse Power And This Greatly Cools Off The Ld100 2-Stroke Cylinder. Would Result Better Performance And Longer Life For The 2 Stroke Ld100/79Cc/80Cc..
6C.
Fully Cnc Machine Made; Alum Design.
Features
- Higher performance Racing head for 2 stroke kit LD100 100cc
- Fully CNC machine made; Alum Design
- The racing cylinder head increases the horse power and this greatly cools off the LD100 2-Stroke cylinder. Would result better performance and longer life for the 2 Stroke LD100/79cc/80cc.
- 6c
- See more on Amazon...
Brand: JZSPORTS | Manufacturer: JZSPORTS
See On Amazon #20
CDHPOWER 4L Gas Tank with Cap, Black Color, Gas Motorized Bicycle 49cc/66cc/80cc
Asin: B08F5466C7 | Ean: 0762021968331 | UPC: 762021968331
Petcock Excluded.
Size Of Gas Tank: Overall Length 377Mm,Overall Width185mm, Overall Height 150Mm.
All Mounting Hardware To Gas Tank Such As Brackets,Washers,Nuts Included In Package..
Any Questions,Please Contact Us Firstly !We Can Help You Solve The Problem Until You Are Satisfied..
Features
- 4L Gas Tank with Cap, Black Color, Gas Motorized Bicycle 49cc/66cc/80cc
- Any questions,please contact us firstly !We can help you solve the problem until you are satisfied.
- Petcock excluded
- All mounting hardware to gas tank such as brackets,washers,nuts included in package.
- Size of gas tank: Overall length 377mm,overall width185mm, overall height 150mm
- See more on Amazon...
Brand: CDHPOWER | Manufacturer: cdhpower
See On Amazon
Looking For Something Else?
Search