BLIKA 20 Pack 3/8" ID Angle Washers and 20 Pack 3/16" Invisible Receiver and Swage Stud Ends
Asin: B0BZYT6WG9
As an Amazon Associate we earn a fee from qualifying purchases when you follow a link to Amazon from this page. We rank the products, but the links to Amazon are promotional.【Material】The Angle Stair Washer Is Made Of Stainless Steel T316 Marine Grade, High Tensile Strength And Anti-Fatigue Strength Weatherproof. It Is Corrosion-Resistant Which Makes Our Balustrade Hardware Suitable For Coastal Installations. Cable Railing System Requires Hardly Any Maintenance..
【Package List】20 Pack 3/8" Id Angle Washers And 20 Pack 3/16" Invisible Receiver And Swage Stud Ends..
【Easy To Install】This Angle Beveled Washer Is Compatible With 1/8" Invisible Receiver And Swage Stud Ends(B09y5q667k, B0bfkjvl9r) And 3/16" Invisible Receiver And Swage Stud Ends(B07pk44ll6)..
【Size】A(Inside Diameter) = 3/8", B(Outside Diameter) = 5/8", Angle = 30 Degree. 30 Degree Beveled Washer Fits For 3/8" Threaded Stud Ends (1/8" & 3/16" Cable Railing Kit)..
Features
- Applications 30 Degree angled design can be applied to 25, 30, 35 and 40 degrees stair railing, Angle beveled washers provide a flat bearing surface when attaching fittings at angled stair terminations. This angled washer is perfect for planning your cable railing project, providing beveled washer for the angle of your garden, stairs and aisle beside for indoor or outdoor applications(wood, steel, aluminum post on deck railing).
- Size A(Inside diameter) = 3/8, B(Outside diameter) = 5/8, Angle = 30 Degree. 30 degree beveled washer fits for 3/8 Threaded Stud Ends (1/8 & 3/16 Cable Railing Kit).
- Material The angle stair washer is made of Stainless Steel T316 Marine Grade, high tensile strength and anti-fatigue strength Weatherproof. It is corrosion-resistant which makes our balustrade hardware suitable for coastal installations. Cable railing system requires hardly any maintenance.
- Easy to Install This angle beveled washer is compatible with 1/8 Invisible Receiver and Swage Stud Ends(B09Y5Q667K, B0BFKJVL9R) and 3/16 Invisible Receiver and Swage Stud Ends(B07PK44LL6).
- Package List 20 Pack 3/8 ID Angle Washers and 20 Pack 3/16 Invisible Receiver and Swage Stud Ends.
- See more on Amazon...
Brand: BLIKA
See On Amazon Similar To BLIKA 20 Pack 3 8
#1
BLIKA 60 Pack 1/8" Black Stainless Steel Invisible Receiver and Swage Stud End for Cable Railing, Deck Stair Threaded End Fitting for Wood & Metal Post, Black Cable Railing Hardware
Asin: B0CTM1DKBS
【Size】Black Invisible Cable Railing Kits Fit For 1/8 Inch Stainless Steel Wire Rope Cable. Overall Length Of The Receiver: 1.02", Threaded Stud Length: 2.17", Thread: 1/4-20. Min Length: 2.57", Max Length: 3.01"..
【Package List】60 Pack T316 Black Stainless Steel 1/8" Invisible Receiver And Swage Stud Ends. If You're Not Satisfied With This Item At Any Time Within One Month Of Purchase, We'll Provide A Refund Or Replacement. We Provide Professional Tool Makes Your Cable Railing Installation Job Easier..
【Easy To Install】Invisible Receiver With Hexagon Socket. Invisable After Being Installed Due To Its Small Size And Consice Appearance. These Swage Cable Railing End Fittings Require A Special Swaging Tool In Order To Secure Them On The Wire. Hydraulic Crimper Tool & Cable Cutter: B083z5jqj9. 1/8" Stainless Steel Protector Sleeves: B0c582hxhz. For Stair Cable Railing, Compatible With 5/16" Id Black Angle Washers: B0cm2wzvyq..
【T316 Stainless Stell】This Black Cable Railing Hardware Was Made With T316 Stainless Steel So You Don't Have To Worry About Them Rusting Over Time. Because Of Their Material, You Can Install Them Both Indoors And Out. Use With Metal Or Wood Posts. Black Cable Railing Kits Are Suitable For Outdoor Or Indoor..
Features
- APPLICATIONS For 1/8 inch deck cable railing system. It s suitable for 2"x2" metal and wood posts and applicable for both level and angled sections. Provided a "dead end" for a DIY cable railing project, can be used on all sorts of posts in wood or metal. Perfect for installation on exterior decks, marine rigging, or interior applications.
- T316 STAINLESS STELL This black cable railing hardware was made with T316 stainless steel so you don't have to worry about them rusting over time. Because of their material, you can install them both indoors and out. Use with metal or wood posts. Black cable railing kits are suitable for outdoor or indoor.
- SIZE Black invisible cable railing kits fit for 1/8 inch stainless steel wire rope cable. Overall length of the receiver: 1.02, Threaded stud length: 2.17, Thread: 1/4-20. Min length: 2.57, Max length: 3.01.
- EASY TO INSTALL Invisible Receiver with hexagon socket. Invisable after being installed due to its small size and consice appearance. These swage cable railing end fittings require a special swaging tool in order to secure them on the wire. Hydraulic Crimper Tool & Cable Cutter: B083Z5JQJ9. 1/8 Stainless steel protector sleeves: B0C582HXHZ. For stair cable railing, compatible with 5/16 ID Black Angle Washers: B0CM2WZVYQ.
- PACKAGE LIST 60 Pack T316 Black Stainless Steel 1/8 Invisible Receiver and Swage Stud Ends. If you're not satisfied with this item at any time within one month of purchase, we'll provide a refund or replacement. We provide professional tool makes your cable railing installation job easier.
- See more on Amazon...
Brand: BLIKA | Manufacturer: BLIKA
See On Amazon #2
Muzata 20Pairs Black Cable Railing Kit 1/8" Swage Toggle Turnbuckle Hardware T316 Stainless Steel for Wood Post WoodEasy System Angle 180 Adjustable Stairs Deck 20 Cable Lines CK07 BD1,CA4 CA5
Asin: B08DMYF7YV | Model: MZZ166B | PartNumber: MZZ166B | Ean: 0706597340276 | UPC: 706597340276
Easy To Install -- This Cable Railing Kit Does Not Require Any Pre-Drilling And Can Be Simply Installed By Tightening The Screws. The Wide Adjustable Range Makes Installation Easier, Especially For Beginners, Who Might Not Cut The Cable To The Precise Length. Apply For Both Wood Posts And Wood Posts With Sleeves.
Why Choose Us - Muzata Has Helped Millions Of Families With Their Cable Railing Projects During The Past Years. We Believe That Home Renovation Should Be Easy And Affordable. So We Work With Every Effort To Provide Quality Products And Professional Service, To Make Muzata A Reliable Brand. Need Professional Complete Cable Railing Solutions, Please Reach Us To Get Free Design Or After-Sales Service.
Advice For Constructing A System - To Help You Build A Cool-Looking Woodblack Cable Railing System More Efficiently, We Recommend The Following Product Combinations From Muzata, Including 1/8" Black Toggle Turnbuckle Muzata Ck07, Black Angle Protector Sleeve Cr68, Black Level Protector Sleeve Muzata Cr88, Id-1/8" Vinyl Coated Black Wire Rope Wr22, Hydraulic Crimper With Cable Cutter Ck12, Drill Guide Ct24.
Package Includes - 20Pcs Turnbuckles, 20Pcs Terminals, 80Pcs Screws, 1Pc Bent Wrench. With 2 Can Pull A Cable, You Can Make Up To 20 Cable Runs Spanning A Maximum Of 30Ft Between Two End Posts. Post Spacing Should Not Exceed 4Ft And Cable Spacing Should Not Exceed 4Inch. If The Distance Between End Posts Is Over 30Ft, Or If There Are Corners Or Angle Changes, A New Installation With Another Cable Railing Kit Is Required To Ensure Safety And Structural Integrity.
Features
- Multi-Angled and Wide-Adjustment -- This cable railing kit works for 1/8" wire rope in multi-angled stairways as well as horizontal sections. The multi-angle feature and adjustable closed-body enables the turnbuckle to rotate from 0-180 degrees and adjust freely from the max length of 10.1 inch to the min length of 6.8 inch
- Package includes - 20pcs turnbuckles, 20pcs terminals, 80pcs screws, 1pc bent wrench. With 2 can pull a cable, you can make up to 20 cable runs spanning a maximum of 30ft between two end posts. Post spacing should not exceed 4ft and cable spacing should not exceed 4inch. If the distance between end posts is over 30ft, or if there are corners or angle changes, a new installation with another cable railing kit is required to ensure safety and structural integrity
- Easy to install -- This cable railing kit does not require any pre-drilling and can be simply installed by tightening the screws. The wide adjustable range makes installation easier, especially for beginners, who might not cut the cable to the precise length. Apply for both wood posts and wood posts with sleeves
- Advice for constructing a system - To help you build a cool-looking WoodBlack cable railing system more efficiently, we recommend the following product combinations from Muzata, including 1/8 black toggle turnbuckle MUZATA CK07, black angle protector sleeve CR68, black level protector sleeve Muzata CR88, ID-1/8 vinyl coated black wire rope WR22, hydraulic crimper with cable cutter CK12, drill guide CT24
- Why Choose Us - MUZATA has helped millions of families with their cable railing projects during the past years. We believe that home renovation should be easy and affordable. So we work with every effort to provide quality products and professional service, to make Muzata a reliable brand. Need professional complete cable railing solutions, please reach us to get Free design or After-Sales service
- See more on Amazon...
Brand: Muzata | Manufacturer: Muzata
Dimensions: 2.00 x 10.00 x 2.00 inches
See On Amazon #3
BLIKA 1/8" Cable Railing Hardware, 20 Pack Adjustable Angle 1/8" Cable Railing Kit for Wood Posts,Stair Cable Railing, Angle Cable Railing System, T316 Stainless Steel Railing Cable Kits
Asin: B0CFWP7GX7
【Size】Turnbuckle = 7 9/32"(Min) - 10"(Max) , Deck Toggle End = 3", T316 Stainless Steel Screws = 1 7/8". Suitable For 1/8″ Stainless Steel Wire Rope Cable. If Using The Toggle Turnbuckle, Lengthen The Turnbuckle To Allow Cable Tightening Once Installed..
【Package List】20 Pack T316 Stainless Steel Toggle Turnbuckles & Ends, 1 X Spanner Multi Tool. If You're Not Satisfied With This Item At Any Time Within One Month Of Purchase, We'll Provide A Refund Or Replacement. If You Have Any Issues About Our Product, Please Kindly Feel Free To Contact Us..
【Easy To Install】These Swage Cable Railing End Fittings Require A Special Swaging Tool In Order To Secure Them On The Wire. Hydraulic Crimper Tool & Cable Cutter: B083z5jqj9. The Spanner Multi Tool Feature Tightening Jaws Specifically For Lag Screws, Swage Studs And Turnbuckles. Insert One Mini Screwdriver Into The Center Hole Of The Turnbuckle. Use The Wrench To Prevent Cable From Spinning..
【T316 Stainless Steel】Blika Cable Railing Hardware Is Made With T316 Stainless Steel So You Don’T Have To Worry About Them Rusting Over Time. Because Of Their Material, You Can Install Them Both Indoors And Out. Cable Railing Tensioner Kit Can Be Used With Wood Posts..
Features
- Application Stair cable railing kit works for 1/8" wire rope in multi-angled stairways as well as horizontal sections. The multi-angle feature and adjustable closed-body enables the turnbuckle to rotate from 0-180 degrees and adjust the length freely. The swage toggle turnbuckle hardware can be used at angle stair railing or horizontal cable guardrail. Suitable for outdoor or indoor.
- T316 Stainless Steel BLIKA cable railing hardware is made with T316 stainless steel so you don t have to worry about them rusting over time. Because of their material, you can install them both indoors and out. Cable railing Tensioner kit can be used with wood posts.
- Size Turnbuckle = 7 9/32(Min) - 10(Max) , Deck Toggle End = 3, T316 stainless steel screws = 1 7/8. Suitable for 1/8 stainless steel wire rope cable. If using the toggle turnbuckle, lengthen the turnbuckle to allow cable tightening once installed.
- Easy To Install These swage cable railing end fittings require a special swaging tool in order to secure them on the wire. Hydraulic Crimper Tool & Cable Cutter: B083Z5JQJ9. The spanner multi tool feature tightening jaws specifically for Lag Screws, Swage Studs and Turnbuckles. Insert one mini screwdriver into the center hole of the turnbuckle. Use the wrench to prevent cable from spinning.
- Package List 20 Pack T316 Stainless Steel Toggle Turnbuckles & Ends, 1 x Spanner Multi Tool. If you're not satisfied with this item at any time within one month of purchase, we'll provide a refund or replacement. If you have any issues about our product, please kindly feel free to contact us.
- See more on Amazon...
Brand: BLIKA | Manufacturer: BLIKA
See On Amazon #4
Muzata 20Pack 1/8" Stemball Swage Dead End Invisible Cable Railing Kit Terminal for Wood Stair Deck Hardware End Fitting T316 Stainless Steel CR24, CV1 CV2
Asin: B078H4W8GZ | Model: CR24 | PartNumber: CR24
Marine Grade - This Cable Railing Hardware Is Made Of T316 Stainless Steel, Which Has Excellent Resistance To Rust, Corrosion And Extreme Weather. Ideal For Indoor And Outdoor, Even Coastal Applications Subject To High Humidity And Salt Air.
Why Choose Us - Muzata Has Helped Millions Of Families With Their Cable Railing Projects During The Past Years. We Believe That Home Renovation Should Be Easy And Affordable. So We Work With Every Effort To Provide Quality Products And Professional Service, To Make Muzata A Reliable Brand. Need Professional Cable Railing Solutions, Please Reach Us To Get Free Design Or After-Sales Service.
Advice For Constructing A System - To Help You Build A Cost-Effective Cable Railing System More Efficiently, We Recommend The Following Product Combinations From Muzata, Including Cable Railing Tensioner Muzata Cr39,30° Angle Beveled Washer Cr25, Fixed End Cr24, Level Protector Sleeves Cr13, Angled Protector Sleeves Cr68, Hydraulic Crimper And Cutter Suit Ct01, Wire Rope Wr02, Drill Guide Ct19.
Clean Finished Look - Drilling A Hole Diameter Of 1/4" In The Post, The Only Exposed Part Is A Small And Shiny Head After You Tap The Stemball Into The Hole. This Cable Railing Terminal Is Definitely Invisible For Wood Post Of 2" And Above, Providing A Clean Finished Look For Your Cable Railing Project. Notes: These Cable Railing Kits Are Only For Wood Posts Or Metal Posts With Holes Size Smaller Than 2/5".
Features
- ONLY work as fixed end - Muzata CR24 ONLY works as a fixed end for 1/8" wire rope. It provides a "dead end" for whole cable railing project and strongly holds the wire rope in place all the time. A complete cable line should include both tensioner and fixed end. Recommend to use with 1/8 cable railing tensioners (search Muzata CR39/CR36/CR52- not included). Package includes: 20packs fixed ends
- Clean Finished Look - Drilling a hole diameter of 1/4 in the post, the only exposed part is a small and shiny head after you tap the stemball into the hole. This cable railing terminal is definitely invisible for wood post of 2 and above, providing a clean finished look for your cable railing project. Notes: these cable railing kits are ONLY for WOOD posts or metal posts with holes size smaller than 2/5
- Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather. Ideal for indoor and outdoor, even coastal applications subject to high humidity and salt air
- Advice for constructing a system - To help you build a cost-effective cable railing system more efficiently, we recommend the following product combinations from Muzata, including cable railing tensioner Muzata CR39,30 angle beveled washer CR25, fixed end CR24, level protector sleeves CR13, angled protector sleeves CR68, hydraulic crimper and cutter suit CT01, wire rope WR02, drill guide CT19
- Why Choose Us - MUZATA has helped millions of families with their cable railing projects during the past years. We believe that home renovation should be easy and affordable. So we work with every effort to provide quality products and professional service, to make Muzata a reliable brand. Need professional cable railing solutions, please reach us to get Free design or After-Sales service
- See more on Amazon...
Brand: Muzata | Manufacturer: MUZATA
Dimensions: 0.63 x 1.57 x 0.63 inches
See On Amazon #5
BLIKA 40 Pack T316 Stainless Steel Black Right&Left Handed Thread Swage Lag Screws for Wood Posts of 1/8" Black Cable Railing Kit, Black Cable Railing Hardware with Wrenches, DIY Wood Baluster
Asin: B0D258B1NS
【Stainless Steel】Black Cable Railing Kit Is Made Of Stainless Steel T316 Marine Grade. High Tensile Strength And Anti-Fatigue Strength Weatherproof, Super Strong Resistance To Rust And Corrosion Which Make Our Balustrade Hardware Suitable For Coastal Installations. Black Cable Railing System Requires Hardly Any Maintenance..
【Package List】20 X Black Swage Lag Screws Left+ 20 X Black Swage Lag Screws Right + 2 X Spanner Multi Tool + 2 Free Drill Bit +User Manual. If You're Not Satisfied With This Item At Any Time Within One Month Of Purchase, We'll Provide A Refund Or Replacement. If You Have Any Issues About Our Product, Please Kindly Feel Free To Contact Us..
【Easy To Install】The Black Cable Railing Lag Screw Has A Pull Out Strength Of 580Kg. 80Mm Spaces For 1/8" Diameter Wire Because The Required Wire Tensions At Greater Spacings Would Require The Tension To Be Beyond The Wire Safe Load Limit. Black Lag Screw System Is A Streamline Stainless Steel Wire Balustrade Systems For Straight, Stair Or Angled Sections When Using Timber Posts. It Is Recommended You Use Two People For Installation Of This System..
【Size】Thread Length = 2", Thread Diameter = 1/4", Hole Size = 1/8", Overall Length = 4", Hole Depth = 1.57", Pull Out= 580Kg. Black Cable Railing Swage Lag Screws Fit For 1/8 Inch Stainless Steel Cable..
Features
- Applications BLIKA spanner tool features three tightening jaws are designed to help in the installation of cable railing, the two holes of wrench can help with the marking of the pilot holes, the distance of mark hole is 3". BLIKA high-quality stainless steel wire balustrade hardware that is suitable for indoor and outdoor applications. Black cable railing swage lag screws perfect for planning your DIY cable railing project, staircases, balconies and decking areas.
- Size Thread Length = 2, Thread Diameter = 1/4, Hole Size = 1/8, Overall Length = 4, Hole Depth = 1.57, Pull Out= 580kg. Black cable railing swage lag screws fit for 1/8 Inch stainless steel cable.
- Stainless Steel Black cable railing kit is made of stainless steel T316 marine grade. High tensile strength and anti-fatigue strength Weatherproof, super strong resistance to rust and corrosion which make our balustrade hardware suitable for coastal installations. Black cable railing system requires hardly any maintenance.
- Easy to Install The black cable railing lag screw has a pull out strength of 580kg. 80mm spaces for 1/8 diameter wire because the required wire tensions at greater spacings would require the tension to be beyond the wire safe load limit. Black lag screw system is a streamline stainless steel wire balustrade systems for straight, stair or angled sections when using timber posts. It is recommended you use two people for installation of this system.
- Package List 20 x Black swage lag screws left+ 20 x Black swage lag screws right + 2 x Spanner Multi Tool + 2 Free Drill Bit +User Manual. If you're not satisfied with this item at any time within one month of purchase, we'll provide a refund or replacement. If you have any issues about our product, please kindly feel free to contact us.
- See more on Amazon...
Brand: BLIKA | Manufacturer: BLIKA
See On Amazon #6
BLIKA 20 Pack 4"x4" Invisible Cable Railing Kits, 1/8" Stainless Steel Invisible Receiver and Swage Stud End for Cable Railing, Deck Stair Threaded End Fitting for 2"x2", 4"x4" Wood/Metal Posts
Asin: B0BYDKYQ5T
【Size】4"X4" Invisible Cable Railing Kits Fit For 1/8 Inch Stainless Steel Wire Rope Cable. Overall Length Of The Receiver: 1.75", Threaded Stud Length: 2.98", Thread: 1/4-20. Min Length: 3.73", Max Length: 4.59"..
【Package List】20 Pack T316 Stainless Steel 1/8" Invisible Receiver And Swage Stud End For 4"X4" Cable Railing Posts. If You're Not Satisfied With This Item At Any Time Within One Month Of Purchase, We'll Provide A Refund Or Replacement. We Provide Professional Tool Makes Your Cable Railing Installation Job Easier..
【Easy To Install】: Invisible Receiver With Hexagon Socket. Invisable After Being Installed Due To Its Small Size And Consice Appearance. These Swage Cable Railing End Fittings Require A Special Swaging Tool In Order To Secure Them On The Wire. Hydraulic Crimper Tool & Cable Cutter: B083z5jqj9. 1/8" Stainless Steel Protector Sleeves: B091c66zrv. For Stair Cable Railing, Compatible With 5/16" Id Angle Washers: B0bxd6ydln..
【T316 Stainless Stell】This Cable Railing Hardware Was Made With T316 Stainless Steel So You Don’T Have To Worry About Them Rusting Over Time. Because Of Their Material, You Can Install Them Both Indoors And Out. Use With Metal Or Wood Posts. Suitable For Outdoor Or Indoor..
Features
- APPLICATIONS For 1/8 inch deck cable railing system. It's suitable for 4"x4" metal and wood posts and applicable for both level and angled sections. Provided a "dead end" for a DIY cable railing project, can be used on all sorts of posts in wood or metal. Perfect for installation on exterior decks, marine rigging, or interior applications.
- T316 STAINLESS STELL This cable railing hardware was made with T316 stainless steel so you don t have to worry about them rusting over time. Because of their material, you can install them both indoors and out. Use with metal or wood posts. Suitable for outdoor or indoor.
- SIZE 4x4 Invisible cable railing kits fit for 1/8 inch stainless steel wire rope cable. Overall length of the receiver: 1.75, Threaded stud length: 2.98, Thread: 1/4-20. Min length: 3.73, Max length: 4.59.
- EASY TO INSTALL : Invisible Receiver with hexagon socket. Invisable after being installed due to its small size and consice appearance. These swage cable railing end fittings require a special swaging tool in order to secure them on the wire. Hydraulic Crimper Tool & Cable Cutter: B083Z5JQJ9. 1/8 Stainless steel protector sleeves: B091C66ZRV. for stair cable railing, compatible with 5/16 ID Angle Washers: B0BXD6YDLN.
- PACKAGE LIST 20 Pack T316 Stainless Steel 1/8 Invisible Receiver and Swage Stud End for 4x4 cable railing posts. If you're not satisfied with this item at any time within one month of purchase, we'll provide a refund or replacement. We provide professional tool makes your cable railing installation job easier.
- See more on Amazon...
Brand: BLIKA | Manufacturer: BLIKA
See On Amazon #7
BLIKA 20 Pack 3/8" ID Angle Washers for Cable Railing Stair Ends, Stainless Steel 30 Degree Angle Beveled Washer for 1/8", 3/16" Invisible Cable Railing Kits, Cable Railing Angled Washer
Asin: B0BXD53X9P | Model: BL017-3/8 | PartNumber: BL017-3/8
【Material】The Angle Stair Washer Is Made Of Stainless Steel T316 Marine Grade, High Tensile Strength And Anti-Fatigue Strength Weatherproof. It Is Corrosion-Resistant Which Makes Our Balustrade Hardware Suitable For Coastal Installations. Cable Railing System Requires Hardly Any Maintenance..
【Package List】20 Pack 3/8 Inch 30 Degree Angle Beveled Washer. If You Have Any Issues About Our Product, Please Kindly Feel Free To Contact Us. If You're Not Satisfied With This Item At Any Time Within One Month Of Purchase, We'll Provide A Refund Or Replacement..
【Easy To Install】This Angle Beveled Washer Is Compatible With 1/8" Invisible Receiver And Swage Stud Ends(B09y5q667k, B0bfkjvl9r) And 3/16" Invisible Receiver And Swage Stud Ends(B07pk44ll6)..
【Size】A(Inside Diameter) = 3/8", B(Outside Diameter) = 5/8", Angle = 30 Degree. 30 Degree Beveled Washer Fits For 3/8" Threaded Stud Ends (1/8" & 3/16" Cable Railing Kit)..
Features
- Applications 30 Degree angled design can be applied to 25, 30, 35 and 40 degrees stair railing, Angle beveled washers provide a flat bearing surface when attaching fittings at angled stair terminations. This angled washer is perfect for planning your cable railing project, providing beveled washer for the angle of your garden, stairs and aisle beside for indoor or outdoor applications(wood, steel, aluminum post on deck railing).
- Size A(Inside diameter) = 3/8, B(Outside diameter) = 5/8, Angle = 30 Degree. 30 degree beveled washer fits for 3/8 Threaded Stud Ends (1/8 & 3/16 Cable Railing Kit).
- Material The angle stair washer is made of Stainless Steel T316 Marine Grade, high tensile strength and anti-fatigue strength Weatherproof. It is corrosion-resistant which makes our balustrade hardware suitable for coastal installations. Cable railing system requires hardly any maintenance.
- Easy to Install This angle beveled washer is compatible with 1/8 Invisible Receiver and Swage Stud Ends(B09Y5Q667K, B0BFKJVL9R) and 3/16 Invisible Receiver and Swage Stud Ends(B07PK44LL6).
- Package List 20 Pack 3/8 inch 30 Degree Angle Beveled Washer. If you have any issues about our product, please kindly feel free to contact us. If you're not satisfied with this item at any time within one month of purchase, we'll provide a refund or replacement.
- See more on Amazon...
Brand: BLIKA | Manufacturer: BLIKA
See On Amazon #8
Muzata 10 Pack Invisible Cable Railing kit 1/8" Swage Tensioner Hidden T316 Stainless Steel for 2"x2" and 4"x4" Wood Metal Post Deck Stairs WoodHidden System CR38, CV1 CV2
Asin: B07RKRWHWW | Model: CR38 | PartNumber: CR38 | Ean: 0706597337368 | UPC: 706597337368
Marine Grade - This Cable Railing Hardware Is Made Of T316 Stainless Steel, Which Has Excellent Resistance To Rust, Corrosion And Extreme Weather, Ideal For Indoor Or Outdoor, Even Coastal Applications.
Why Choose Us - Muzata Has Helped Millions Of Families With Their Cable Railing Projects During The Past Years. We Believe That Home Renovation Should Be Easy And Affordable. So We Work With Every Effort To Provide Quality Products And Professional Service, To Make Muzata A Reliable Brand. Need Professional One-Stop Cable Railing Solutions, Please Reach Us To Get Free Design Or After-Sales Service.
Advice For Constructing A System - To Help You Build A Cost-Effective Cable Railing System More Efficiently, We Recommend The Following Product Combinations From Muzata, Including Posts Ps01 Ps02 Ps32, Handrails Ht10, Cable Railing Kit Cr38 Cr07, Angled Beveled Washer Cr60,1/8” Wire Rope Wr01, Adhesive Sleeve Cr66 Cr76, Wheel Protector Sleeve Cr72, Crimper And Cutter Ck12, Socket Wrench Ct16,Handrails Connectors Ha01 Ha02 Ha23 Ha24.
Level&Angle Installation -It’S Suitable For 2"X2", 4"X4" Metal And Wood Posts And Applicable For Both Level And Angled Sections. 30 Degree Angled Washer Muzata Cr60 Is Needed For Cable Railing Stair Installations.
Features
- Patent Invisible Design - With the patent invisible flattened tail design, you can hide the ugly swaged end inside the wood post to get a neat appearance, and get enough tension to pass 4 sphere test to meet code compliance. The customized socket wrench Muzata CT16 is essential for the invisible installation and keeps the cable from spinning when tightening. Package includes: 20 pack tensioners, 1pc allen wrench
- Level&Angle Installation -It s suitable for 2x2, 4x4 metal and wood posts and applicable for both level and angled sections. 30 degree angled washer Muzata CR60 is needed for cable railing stair installations
- Marine Grade - This cable railing hardware is made of T316 stainless steel, which has excellent resistance to rust, corrosion and extreme weather, ideal for indoor or outdoor, even coastal applications
- Advice for constructing a system - To help you build a cost-effective cable railing system more efficiently, we recommend the following product combinations from Muzata, including posts PS01 PS02 PS32, handrails HT10, cable railing kit CR38 CR07, angled beveled washer CR60,1/8 wire rope WR01, adhesive sleeve CR66 CR76, wheel protector sleeve CR72, crimper and cutter CK12, socket wrench CT16,handrails connectors HA01 HA02 HA23 HA24
- Why Choose Us - MUZATA has helped millions of families with their cable railing projects during the past years. We believe that home renovation should be easy and affordable. So we work with every effort to provide quality products and professional service, to make Muzata a reliable brand. Need professional one-stop cable railing solutions, please reach us to get Free design or After-Sales service
- See more on Amazon...
Brand: Muzata | Manufacturer: Muzata
See On Amazon #9
BLIKA 1/8" Black Cable Railing Hardware, 20 Pack T316 Stainless Steel Adjustable Angle 1/8" Black Cable Railing Kit for Wood Posts, Black Stair Cable Railing, Angle Cable Railing System
Asin: B0CDP7S5ZY
【Size】Black Turnbuckle = 7 9/32"(Min) - 10"(Max) , Black Deck Toggle End = 3", T316 Stainless Steel Screws = 1 7/8". Suitable For 1/8″ Stainless Steel Wire Rope Cable. If Using The Black Toggle Turnbuckle, Lengthen The Black Turnbuckle To Allow Cable Tightening Once Installed..
【Package List】20 Pack T316 Black Stainless Steel Toggle Turnbuckles & Ends, 1 X Spanner Multi Tool. If You're Not Satisfied With This Item At Any Time Within One Month Of Purchase, We'll Provide A Refund Or Replacement. If You Have Any Issues About Our Product, Please Kindly Feel Free To Contact Us..
【Easy To Install】These Black Swage Cable Railing End Fittings Require A Special Swaging Tool In Order To Secure Them On The Wire. Hydraulic Crimper Tool & Cable Cutter: B083z5jqj9. The Spanner Multi Tool Feature Tightening Jaws Specifically For Lag Screws, Swage Studs And Turnbuckles. Insert One Mini Screwdriver Into The Center Hole Of The Turnbuckle. Use The Wrench To Prevent Cable From Spinning..
【T316 Stainless Steel】Black Cable Railing Hardware Is Made With T316 Stainless Steel So You Don't Have To Worry About Them Rusting Over Time. Because Of Their Material, You Can Install Them Both Indoors And Out. Cable Railing Tensioner Kit Can Be Used With Wood Posts..
Features
- Application Black stair cable railing kits fit for 1/8'' stainless steel cable. This black adjustable angle cable railing kit has 180 angle freedom adjustable base, can be used at angle stair railing or horizontal cable guardrail. Black cable railing hardware is suitable for outdoor or indoor.
- T316 Stainless Steel Black cable railing hardware is made with T316 stainless steel so you don't have to worry about them rusting over time. Because of their material, you can install them both indoors and out. Cable railing Tensioner kit can be used with wood posts.
- Size Black Turnbuckle = 7 9/32(Min) - 10(Max) , Black Deck Toggle End = 3, T316 stainless steel screws = 1 7/8. Suitable for 1/8 stainless steel wire rope cable. If using the black toggle turnbuckle, lengthen the black turnbuckle to allow cable tightening once installed.
- Easy To Install These black swage cable railing end fittings require a special swaging tool in order to secure them on the wire. Hydraulic Crimper Tool & Cable Cutter: B083Z5JQJ9. The spanner multi tool feature tightening jaws specifically for Lag Screws, Swage Studs and Turnbuckles. Insert one mini screwdriver into the center hole of the turnbuckle. Use the wrench to prevent cable from spinning.
- Package List 20 Pack T316 Black Stainless Steel Toggle Turnbuckles & Ends, 1 x Spanner Multi Tool. If you're not satisfied with this item at any time within one month of purchase, we'll provide a refund or replacement. If you have any issues about our product, please kindly feel free to contact us.
- See more on Amazon...
Brand: BLIKA | Manufacturer: BLIKA
See On Amazon #10
BLIKA 20 Pack Stainless Steel Invisible Receiver and Swage Stud End for 3/16 Inch Cable Railing, Deck Stair Threaded End Fitting for 2"x2", 4"x4" Wood/Metal Posts, 3/16" Cable Railing Hardware
Asin: B07PK44LL6 | Ean: 0840637169837 | UPC: 840637169837
【Size】Overall Length Of The Receiver: 2.24", Threaded Stud Length: 2.8", Min Length: 2.97", Max Length: 3.78". Drill Hole Size = 0.35". Use With 3/16″ Wire Rope Cable..
【Package List】20 Pack T316 Stainless Steel Invisible Receiver And Swage Stud End. If You're Not Satisfied With This Item At Any Time Within One Month Of Purchase, We'll Provide A Refund Or Replacement..
【Easy To Install】Invisible Receiver With Hexagon Socket. Invisable After Being Installed Due To Its Small Size And Consice Appearance. These Swage Cable Railing End Fittings Require A Special Swaging Tool In Order To Secure Them On The Wire. Hydraulic Crimper Tool & Cable Cutter: B083z5jqj9..
【T316 Stainless Stell】This Cable Railing Hardware Was Made With T316 Stainless Steel So You Don’T Have To Worry About Them Rusting Over Time. Because Of Their Material, You Can Install Them Both Indoors And Out. Use With Metal Or Wood Posts. Suitable For Outdoor Or Indoor..
Features
- APPLICATIONS It is suitable for 2"x2", 4"x4" wood /metal Posts, level & angle installation. Invisible cable railing kits work by securing one end of a cable wire within the post. This way, no fasteners are visible to the exterior eye. When using invisible cable railing system on a stairway or other angle application, we recommend using 3/8 ID 30 degree angle washer: B0BXD53X9P.
- T316 STAINLESS STELL This cable railing hardware was made with T316 stainless steel so you don t have to worry about them rusting over time. Because of their material, you can install them both indoors and out. Use with metal or wood posts. Suitable for outdoor or indoor.
- SIZE Overall length of the receiver: 2.24, Threaded stud length: 2.8, Min length: 2.97, Max length: 3.78. Drill Hole Size = 0.35. Use with 3/16 wire rope cable.
- EASY TO INSTALL Invisible Receiver with hexagon socket. Invisable after being installed due to its small size and consice appearance. These swage cable railing end fittings require a special swaging tool in order to secure them on the wire. Hydraulic Crimper Tool & Cable Cutter: B083Z5JQJ9.
- PACKAGE LIST 20 Pack T316 Stainless Steel Invisible Receiver and Swage Stud End. If you're not satisfied with this item at any time within one month of purchase, we'll provide a refund or replacement.
- See more on Amazon...
Brand: BLIKA | Manufacturer: BLIKA
See On Amazon
Looking For Something Else?
Search